diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/drivers/bma180/bma180.cpp | 1 | ||||
-rw-r--r-- | src/drivers/ets_airspeed/ets_airspeed.cpp | 21 | ||||
-rw-r--r-- | src/drivers/hmc5883/hmc5883.cpp | 1 | ||||
-rw-r--r-- | src/drivers/l3gd20/l3gd20.cpp | 1 | ||||
-rw-r--r-- | src/drivers/lsm303d/lsm303d.cpp | 1 | ||||
-rw-r--r-- | src/drivers/mb12xx/mb12xx.cpp | 1 | ||||
-rw-r--r-- | src/drivers/meas_airspeed/meas_airspeed.cpp | 4 | ||||
-rw-r--r-- | src/drivers/mpu6000/mpu6000.cpp | 2 | ||||
-rw-r--r-- | src/drivers/ms5611/ms5611.cpp | 1 |
9 files changed, 19 insertions, 14 deletions
diff --git a/src/drivers/bma180/bma180.cpp b/src/drivers/bma180/bma180.cpp index f0044d36f..1590cc182 100644 --- a/src/drivers/bma180/bma180.cpp +++ b/src/drivers/bma180/bma180.cpp @@ -690,6 +690,7 @@ BMA180::measure() * measurement flow without using the external interrupt. */ report.timestamp = hrt_absolute_time(); + report.error_count = 0; /* * y of board is x of sensor and x of board is -y of sensor * perform only the axis assignment here. diff --git a/src/drivers/ets_airspeed/ets_airspeed.cpp b/src/drivers/ets_airspeed/ets_airspeed.cpp index dd8436b10..084671ae2 100644 --- a/src/drivers/ets_airspeed/ets_airspeed.cpp +++ b/src/drivers/ets_airspeed/ets_airspeed.cpp @@ -153,35 +153,36 @@ ETSAirspeed::collect() ret = transfer(nullptr, 0, &val[0], 2); if (ret < 0) { - log("error reading from sensor: %d", ret); + perf_count(_comms_errors); return ret; } uint16_t diff_pres_pa = val[1] << 8 | val[0]; if (diff_pres_pa == 0) { - // a zero value means the pressure sensor cannot give us a - // value. We need to return, and not report a value or the - // caller could end up using this value as part of an - // average - log("zero value from sensor"); - return -1; + // a zero value means the pressure sensor cannot give us a + // value. We need to return, and not report a value or the + // caller could end up using this value as part of an + // average + perf_count(_comms_errors); + log("zero value from sensor"); + return -1; } if (diff_pres_pa < _diff_pres_offset + MIN_ACCURATE_DIFF_PRES_PA) { diff_pres_pa = 0; - } else { diff_pres_pa -= _diff_pres_offset; } // Track maximum differential pressure measured (so we can work out top speed). if (diff_pres_pa > _max_differential_pressure_pa) { - _max_differential_pressure_pa = diff_pres_pa; + _max_differential_pressure_pa = diff_pres_pa; } // XXX we may want to smooth out the readings to remove noise. differential_pressure_s report; report.timestamp = hrt_absolute_time(); + report.error_count = perf_event_count(_comms_errors); report.differential_pressure_pa = diff_pres_pa; report.voltage = 0; report.max_differential_pressure_pa = _max_differential_pressure_pa; @@ -209,7 +210,7 @@ ETSAirspeed::cycle() /* perform collection */ if (OK != collect()) { - log("collection error"); + perf_count(_comms_errors); /* restart the measurement state machine */ start(); return; diff --git a/src/drivers/hmc5883/hmc5883.cpp b/src/drivers/hmc5883/hmc5883.cpp index 58a1593ed..de043db64 100644 --- a/src/drivers/hmc5883/hmc5883.cpp +++ b/src/drivers/hmc5883/hmc5883.cpp @@ -791,6 +791,7 @@ HMC5883::collect() /* this should be fairly close to the end of the measurement, so the best approximation of the time */ new_report.timestamp = hrt_absolute_time(); + new_report.error_count = perf_event_count(_comms_errors); /* * @note We could read the status register here, which could tell us that diff --git a/src/drivers/l3gd20/l3gd20.cpp b/src/drivers/l3gd20/l3gd20.cpp index 4c3b0ce51..ad6de0ab1 100644 --- a/src/drivers/l3gd20/l3gd20.cpp +++ b/src/drivers/l3gd20/l3gd20.cpp @@ -774,6 +774,7 @@ L3GD20::measure() * 74 from all measurements centers them around zero. */ report.timestamp = hrt_absolute_time(); + report.error_count = 0; // not recorded switch (_orientation) { diff --git a/src/drivers/lsm303d/lsm303d.cpp b/src/drivers/lsm303d/lsm303d.cpp index a90cd0a3d..7244019b1 100644 --- a/src/drivers/lsm303d/lsm303d.cpp +++ b/src/drivers/lsm303d/lsm303d.cpp @@ -1252,6 +1252,7 @@ LSM303D::measure() accel_report.timestamp = hrt_absolute_time(); + accel_report.error_count = 0; // not reported accel_report.x_raw = raw_accel_report.x; accel_report.y_raw = raw_accel_report.y; diff --git a/src/drivers/mb12xx/mb12xx.cpp b/src/drivers/mb12xx/mb12xx.cpp index ccc5bc15e..c910e2890 100644 --- a/src/drivers/mb12xx/mb12xx.cpp +++ b/src/drivers/mb12xx/mb12xx.cpp @@ -490,6 +490,7 @@ MB12XX::collect() /* this should be fairly close to the end of the measurement, so the best approximation of the time */ report.timestamp = hrt_absolute_time(); + report.error_count = perf_event_count(_comms_errors); report.distance = si_units; report.valid = si_units > get_minimum_distance() && si_units < get_maximum_distance() ? 1 : 0; diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index 03d7bbfb9..ee45d46ac 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -138,7 +138,6 @@ MEASAirspeed::measure() if (OK != ret) { perf_count(_comms_errors); - log("i2c::transfer returned %d", ret); return ret; } @@ -161,7 +160,6 @@ MEASAirspeed::collect() ret = transfer(nullptr, 0, &val[0], 4); if (ret < 0) { - log("error reading from sensor: %d", ret); perf_count(_comms_errors); perf_end(_sample_perf); return ret; @@ -207,6 +205,7 @@ MEASAirspeed::collect() } report.timestamp = hrt_absolute_time(); + report.error_count = perf_event_count(_comms_errors); report.temperature = temperature; report.differential_pressure_pa = diff_press_pa; report.voltage = 0; @@ -235,7 +234,6 @@ MEASAirspeed::cycle() /* perform collection */ if (OK != collect()) { - log("collection error"); /* restart the measurement state machine */ start(); return; diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index 14a3571de..70359110e 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -1186,7 +1186,7 @@ MPU6000::measure() * Adjust and scale results to m/s^2. */ grb.timestamp = arb.timestamp = hrt_absolute_time(); - + grb.error_count = arb.error_count = 0; // not reported /* * 1) Scale raw value to SI units using scaling from datasheet. diff --git a/src/drivers/ms5611/ms5611.cpp b/src/drivers/ms5611/ms5611.cpp index 1c8a4d776..938786d3f 100644 --- a/src/drivers/ms5611/ms5611.cpp +++ b/src/drivers/ms5611/ms5611.cpp @@ -573,6 +573,7 @@ MS5611::collect() struct baro_report report; /* this should be fairly close to the end of the conversion, so the best approximation of the time */ report.timestamp = hrt_absolute_time(); + report.error_count = perf_event_count(_comms_errors); /* read the most recent measurement - read offset/size are hardcoded in the interface */ ret = _interface->read(0, (void *)&raw, 0); |