diff options
Diffstat (limited to 'src')
92 files changed, 3288 insertions, 1490 deletions
diff --git a/src/drivers/airspeed/airspeed.h b/src/drivers/airspeed/airspeed.h index 62c0d1f17..c341aa2c6 100644 --- a/src/drivers/airspeed/airspeed.h +++ b/src/drivers/airspeed/airspeed.h @@ -119,7 +119,7 @@ protected: virtual int collect() = 0; work_s _work; - float _max_differential_pressure_pa; + float _max_differential_pressure_pa; bool _sensor_ok; int _measure_ticks; bool _collect_phase; diff --git a/src/drivers/ardrone_interface/ardrone_motor_control.c b/src/drivers/ardrone_interface/ardrone_motor_control.c index 01b89c8fa..81f634992 100644 --- a/src/drivers/ardrone_interface/ardrone_motor_control.c +++ b/src/drivers/ardrone_interface/ardrone_motor_control.c @@ -46,7 +46,6 @@ #include <drivers/drv_hrt.h> #include <uORB/uORB.h> #include <uORB/topics/actuator_outputs.h> -#include <uORB/topics/actuator_controls_effective.h> #include <systemlib/err.h> #include "ardrone_motor_control.h" @@ -384,9 +383,6 @@ void ardrone_mixing_and_output(int ardrone_write, const struct actuator_controls const float startpoint_full_control = 0.25f; /**< start full control at 25% thrust */ static bool initialized = false; - /* publish effective outputs */ - static struct actuator_controls_effective_s actuator_controls_effective; - static orb_advert_t actuator_controls_effective_pub; /* linearly scale the control inputs from 0 to startpoint_full_control */ if (motor_thrust < startpoint_full_control) { @@ -430,25 +426,6 @@ void ardrone_mixing_and_output(int ardrone_write, const struct actuator_controls motor_calc[3] = motor_thrust + (roll_control / 2 - pitch_control / 2 + yaw_control); } - - - /* publish effective outputs */ - actuator_controls_effective.control_effective[0] = roll_control; - actuator_controls_effective.control_effective[1] = pitch_control; - /* yaw output after limiting */ - actuator_controls_effective.control_effective[2] = yaw_control; - /* possible motor thrust limiting */ - actuator_controls_effective.control_effective[3] = (motor_calc[0] + motor_calc[1] + motor_calc[2] + motor_calc[3]) / 4.0f; - - if (!initialized) { - /* advertise and publish */ - actuator_controls_effective_pub = orb_advertise(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, &actuator_controls_effective); - initialized = true; - } else { - /* already initialized, just publishing */ - orb_publish(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, actuator_controls_effective_pub, &actuator_controls_effective); - } - /* set the motor values */ /* scale up from 0..1 to 10..500) */ diff --git a/src/drivers/boards/px4fmu-v2/board_config.h b/src/drivers/boards/px4fmu-v2/board_config.h index ec8dde499..7ab63953f 100644 --- a/src/drivers/boards/px4fmu-v2/board_config.h +++ b/src/drivers/boards/px4fmu-v2/board_config.h @@ -79,17 +79,37 @@ __BEGIN_DECLS #define GPIO_EXTI_GYRO_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN0) #define GPIO_EXTI_MAG_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN1) #define GPIO_EXTI_ACCEL_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN4) +#define GPIO_EXTI_MPU_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15) + +/* Data ready pins off */ +#define GPIO_GYRO_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN0) +#define GPIO_MAG_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN1) +#define GPIO_ACCEL_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN4) +#define GPIO_EXTI_MPU_DRDY (GPIO_INPUT|GPIO_PULLDOWN|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15) + +/* SPI1 off */ +#define GPIO_SPI1_SCK_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN5) +#define GPIO_SPI1_MISO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN6) +#define GPIO_SPI1_MOSI_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN7) + +/* SPI1 chip selects off */ +#define GPIO_SPI_CS_GYRO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN13) +#define GPIO_SPI_CS_ACCEL_MAG_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN15) +#define GPIO_SPI_CS_BARO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTD|GPIO_PIN7) +#define GPIO_SPI_CS_MPU (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN2) /* SPI chip selects */ -#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13) -#define GPIO_SPI_CS_ACCEL_MAG (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15) -#define GPIO_SPI_CS_BARO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN7) -#define GPIO_SPI_CS_FRAM (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10) +#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13) +#define GPIO_SPI_CS_ACCEL_MAG (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15) +#define GPIO_SPI_CS_BARO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN7) +#define GPIO_SPI_CS_FRAM (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10) +#define GPIO_SPI_CS_MPU (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN2) /* Use these in place of the spi_dev_e enumeration to select a specific SPI device on SPI1 */ #define PX4_SPIDEV_GYRO 1 #define PX4_SPIDEV_ACCEL_MAG 2 #define PX4_SPIDEV_BARO 3 +#define PX4_SPIDEV_MPU 4 /* I2C busses */ #define PX4_I2C_BUS_EXPANSION 1 diff --git a/src/drivers/boards/px4fmu-v2/px4fmu2_init.c b/src/drivers/boards/px4fmu-v2/px4fmu2_init.c index ae2a645f7..269ec238e 100644 --- a/src/drivers/boards/px4fmu-v2/px4fmu2_init.c +++ b/src/drivers/boards/px4fmu-v2/px4fmu2_init.c @@ -215,9 +215,9 @@ __EXPORT int nsh_archinitialize(void) stm32_configgpio(GPIO_ADC1_IN2); /* BATT_VOLTAGE_SENS */ stm32_configgpio(GPIO_ADC1_IN3); /* BATT_CURRENT_SENS */ stm32_configgpio(GPIO_ADC1_IN4); /* VDD_5V_SENS */ - stm32_configgpio(GPIO_ADC1_IN10); /* unrouted */ - stm32_configgpio(GPIO_ADC1_IN11); /* unrouted */ - stm32_configgpio(GPIO_ADC1_IN12); /* unrouted */ + // stm32_configgpio(GPIO_ADC1_IN10); /* used by VBUS valid */ + // stm32_configgpio(GPIO_ADC1_IN11); /* unused */ + // stm32_configgpio(GPIO_ADC1_IN12); /* used by MPU6000 CS */ stm32_configgpio(GPIO_ADC1_IN13); /* FMU_AUX_ADC_1 */ stm32_configgpio(GPIO_ADC1_IN14); /* FMU_AUX_ADC_2 */ stm32_configgpio(GPIO_ADC1_IN15); /* PRESSURE_SENS */ @@ -279,6 +279,7 @@ __EXPORT int nsh_archinitialize(void) SPI_SELECT(spi1, PX4_SPIDEV_GYRO, false); SPI_SELECT(spi1, PX4_SPIDEV_ACCEL_MAG, false); SPI_SELECT(spi1, PX4_SPIDEV_BARO, false); + SPI_SELECT(spi1, PX4_SPIDEV_MPU, false); up_udelay(20); message("[boot] Successfully initialized SPI port 1\n"); diff --git a/src/drivers/boards/px4fmu-v2/px4fmu_spi.c b/src/drivers/boards/px4fmu-v2/px4fmu_spi.c index 09838d02f..c66c490a7 100644 --- a/src/drivers/boards/px4fmu-v2/px4fmu_spi.c +++ b/src/drivers/boards/px4fmu-v2/px4fmu_spi.c @@ -73,6 +73,7 @@ __EXPORT void weak_function stm32_spiinitialize(void) stm32_configgpio(GPIO_SPI_CS_GYRO); stm32_configgpio(GPIO_SPI_CS_ACCEL_MAG); stm32_configgpio(GPIO_SPI_CS_BARO); + stm32_configgpio(GPIO_SPI_CS_MPU); /* De-activate all peripherals, * required for some peripheral @@ -81,6 +82,12 @@ __EXPORT void weak_function stm32_spiinitialize(void) stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1); stm32_gpiowrite(GPIO_SPI_CS_BARO, 1); + stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); + + stm32_configgpio(GPIO_EXTI_GYRO_DRDY); + stm32_configgpio(GPIO_EXTI_MAG_DRDY); + stm32_configgpio(GPIO_EXTI_ACCEL_DRDY); + stm32_configgpio(GPIO_EXTI_MPU_DRDY); #endif #ifdef CONFIG_STM32_SPI2 @@ -99,6 +106,7 @@ __EXPORT void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, stm32_gpiowrite(GPIO_SPI_CS_GYRO, !selected); stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1); stm32_gpiowrite(GPIO_SPI_CS_BARO, 1); + stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); break; case PX4_SPIDEV_ACCEL_MAG: @@ -106,6 +114,7 @@ __EXPORT void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, !selected); stm32_gpiowrite(GPIO_SPI_CS_BARO, 1); + stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); break; case PX4_SPIDEV_BARO: @@ -113,6 +122,15 @@ __EXPORT void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1); stm32_gpiowrite(GPIO_SPI_CS_BARO, !selected); + stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); + break; + + case PX4_SPIDEV_MPU: + /* Making sure the other peripherals are not selected */ + stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); + stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1); + stm32_gpiowrite(GPIO_SPI_CS_BARO, 1); + stm32_gpiowrite(GPIO_SPI_CS_MPU, !selected); break; default: diff --git a/src/drivers/device/cdev.cpp b/src/drivers/device/cdev.cpp index 47ebcd40a..7954ce5ab 100644 --- a/src/drivers/device/cdev.cpp +++ b/src/drivers/device/cdev.cpp @@ -109,6 +109,42 @@ CDev::~CDev() } int +CDev::register_class_devname(const char *class_devname) +{ + if (class_devname == nullptr) { + return -EINVAL; + } + int class_instance = 0; + int ret = -ENOSPC; + while (class_instance < 4) { + if (class_instance == 0) { + ret = register_driver(class_devname, &fops, 0666, (void *)this); + if (ret == OK) break; + } else { + char name[32]; + snprintf(name, sizeof(name), "%s%u", class_devname, class_instance); + ret = register_driver(name, &fops, 0666, (void *)this); + if (ret == OK) break; + } + class_instance++; + } + if (class_instance == 4) + return ret; + return class_instance; +} + +int +CDev::unregister_class_devname(const char *class_devname, unsigned class_instance) +{ + if (class_instance > 0) { + char name[32]; + snprintf(name, sizeof(name), "%s%u", class_devname, class_instance); + return unregister_driver(name); + } + return unregister_driver(class_devname); +} + +int CDev::init() { // base class init first diff --git a/src/drivers/device/device.h b/src/drivers/device/device.h index a9ed5d77c..0235f6284 100644 --- a/src/drivers/device/device.h +++ b/src/drivers/device/device.h @@ -396,6 +396,25 @@ protected: */ virtual int close_last(struct file *filp); + /** + * Register a class device name, automatically adding device + * class instance suffix if need be. + * + * @param class_devname Device class name + * @return class_instamce Class instance created, or -errno on failure + */ + virtual int register_class_devname(const char *class_devname); + + /** + * Register a class device name, automatically adding device + * class instance suffix if need be. + * + * @param class_devname Device class name + * @param class_instance Device class instance from register_class_devname() + * @return OK on success, -errno otherwise + */ + virtual int unregister_class_devname(const char *class_devname, unsigned class_instance); + private: static const unsigned _max_pollwaiters = 8; @@ -488,4 +507,7 @@ private: } // namespace device +// class instance for primary driver of each class +#define CLASS_DEVICE_PRIMARY 0 + #endif /* _DEVICE_DEVICE_H */ diff --git a/src/drivers/device/spi.cpp b/src/drivers/device/spi.cpp index fa6b78d64..fed6c312c 100644 --- a/src/drivers/device/spi.cpp +++ b/src/drivers/device/spi.cpp @@ -181,4 +181,10 @@ SPI::transfer(uint8_t *send, uint8_t *recv, unsigned len) return OK; } +void +SPI::set_frequency(uint32_t frequency) +{ + _frequency = frequency; +} + } // namespace device diff --git a/src/drivers/device/spi.h b/src/drivers/device/spi.h index 9103dca2e..299575dc5 100644 --- a/src/drivers/device/spi.h +++ b/src/drivers/device/spi.h @@ -102,6 +102,17 @@ protected: int transfer(uint8_t *send, uint8_t *recv, unsigned len); /** + * Set the SPI bus frequency + * This is used to change frequency on the fly. Some sensors + * (such as the MPU6000) need a lower frequency for setup + * registers and can handle higher frequency for sensor + * value registers + * + * @param frequency Frequency to set (Hz) + */ + void set_frequency(uint32_t frequency); + + /** * Locking modes supported by the driver. */ enum LockMode { diff --git a/src/drivers/drv_gpio.h b/src/drivers/drv_gpio.h index 37af26d52..f60964c2b 100644 --- a/src/drivers/drv_gpio.h +++ b/src/drivers/drv_gpio.h @@ -46,7 +46,7 @@ /* * PX4FMU GPIO numbers. * - * For shared pins, alternate function 1 selects the non-GPIO mode + * For shared pins, alternate function 1 selects the non-GPIO mode * (USART2, CAN2, etc.) */ # define GPIO_EXT_1 (1<<0) /**< high-power GPIO 1 */ @@ -144,4 +144,6 @@ /** read all the GPIOs and return their values in *(uint32_t *)arg */ #define GPIO_GET GPIOC(12) +#define GPIO_SENSOR_RAIL_RESET GPIOC(13) + #endif /* _DRV_GPIO_H */
\ No newline at end of file diff --git a/src/drivers/drv_hrt.h b/src/drivers/drv_hrt.h index 8a99eeca7..d130d68b3 100644 --- a/src/drivers/drv_hrt.h +++ b/src/drivers/drv_hrt.h @@ -142,6 +142,20 @@ __EXPORT extern bool hrt_called(struct hrt_call *entry); __EXPORT extern void hrt_cancel(struct hrt_call *entry); /* + * initialise a hrt_call structure + */ +__EXPORT extern void hrt_call_init(struct hrt_call *entry); + +/* + * delay a hrt_call_every() periodic call by the given number of + * microseconds. This should be called from within the callout to + * cause the callout to be re-scheduled for a later time. The periodic + * callouts will then continue from that new base time at the + * previously specified period. + */ +__EXPORT extern void hrt_call_delay(struct hrt_call *entry, hrt_abstime delay); + +/* * Initialise the HRT. */ __EXPORT extern void hrt_init(void); diff --git a/src/drivers/drv_rc_input.h b/src/drivers/drv_rc_input.h index 78ffad9d7..6f773b82a 100644 --- a/src/drivers/drv_rc_input.h +++ b/src/drivers/drv_rc_input.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -60,7 +60,7 @@ /** * Maximum number of R/C input channels in the system. S.Bus has up to 18 channels. */ -#define RC_INPUT_MAX_CHANNELS 18 +#define RC_INPUT_MAX_CHANNELS 20 /** * Input signal type, value is a control position from zero to 100 @@ -89,6 +89,9 @@ struct rc_input_values { /** number of channels actually being seen */ uint32_t channel_count; + /** receive signal strength indicator (RSSI): < 0: Undefined, 0: no signal, 1000: full reception */ + int32_t rssi; + /** Input source */ enum RC_INPUT_SOURCE input_source; diff --git a/src/drivers/hmc5883/hmc5883.cpp b/src/drivers/hmc5883/hmc5883.cpp index 5f0ce4ff8..d3b99ae66 100644 --- a/src/drivers/hmc5883/hmc5883.cpp +++ b/src/drivers/hmc5883/hmc5883.cpp @@ -77,6 +77,7 @@ */ #define HMC5883L_ADDRESS PX4_I2C_OBDEV_HMC5883 +#define HMC5883L_DEVICE_PATH "/dev/hmc5883" /* Max measurement rate is 160Hz, however with 160 it will be set to 166 Hz, therefore workaround using 150 */ #define HMC5883_CONVERSION_INTERVAL (1000000 / 150) /* microseconds */ @@ -154,6 +155,7 @@ private: float _range_scale; float _range_ga; bool _collect_phase; + int _class_instance; orb_advert_t _mag_topic; @@ -315,12 +317,13 @@ extern "C" __EXPORT int hmc5883_main(int argc, char *argv[]); HMC5883::HMC5883(int bus) : - I2C("HMC5883", MAG_DEVICE_PATH, bus, HMC5883L_ADDRESS, 400000), + I2C("HMC5883", HMC5883L_DEVICE_PATH, bus, HMC5883L_ADDRESS, 400000), _measure_ticks(0), _reports(nullptr), _range_scale(0), /* default range scale from counts to gauss */ _range_ga(1.3f), _mag_topic(-1), + _class_instance(-1), _sample_perf(perf_alloc(PC_ELAPSED, "hmc5883_read")), _comms_errors(perf_alloc(PC_COUNT, "hmc5883_comms_errors")), _buffer_overflows(perf_alloc(PC_COUNT, "hmc5883_buffer_overflows")), @@ -351,6 +354,9 @@ HMC5883::~HMC5883() if (_reports != nullptr) delete _reports; + if (_class_instance != -1) + unregister_class_devname(MAG_DEVICE_PATH, _class_instance); + // free perf counters perf_free(_sample_perf); perf_free(_comms_errors); @@ -374,13 +380,17 @@ HMC5883::init() /* reset the device configuration */ reset(); - /* get a publish handle on the mag topic */ - struct mag_report zero_report; - memset(&zero_report, 0, sizeof(zero_report)); - _mag_topic = orb_advertise(ORB_ID(sensor_mag), &zero_report); + _class_instance = register_class_devname(MAG_DEVICE_PATH); + if (_class_instance == CLASS_DEVICE_PRIMARY) { + /* get a publish handle on the mag topic if we are + * the primary mag */ + struct mag_report zero_report; + memset(&zero_report, 0, sizeof(zero_report)); + _mag_topic = orb_advertise(ORB_ID(sensor_mag), &zero_report); - if (_mag_topic < 0) - debug("failed to create sensor_mag object"); + if (_mag_topic < 0) + debug("failed to create sensor_mag object"); + } ret = OK; /* sensor is ok, but not calibrated */ @@ -875,8 +885,10 @@ HMC5883::collect() } #endif - /* publish it */ - orb_publish(ORB_ID(sensor_mag), _mag_topic, &new_report); + if (_mag_topic != -1) { + /* publish it */ + orb_publish(ORB_ID(sensor_mag), _mag_topic, &new_report); + } /* post a report to the ring */ if (_reports->force(&new_report)) { @@ -1256,7 +1268,7 @@ start() goto fail; /* set the poll rate to default, starts automatic data collection */ - fd = open(MAG_DEVICE_PATH, O_RDONLY); + fd = open(HMC5883L_DEVICE_PATH, O_RDONLY); if (fd < 0) goto fail; @@ -1288,10 +1300,10 @@ test() ssize_t sz; int ret; - int fd = open(MAG_DEVICE_PATH, O_RDONLY); + int fd = open(HMC5883L_DEVICE_PATH, O_RDONLY); if (fd < 0) - err(1, "%s open failed (try 'hmc5883 start' if the driver is not running", MAG_DEVICE_PATH); + err(1, "%s open failed (try 'hmc5883 start' if the driver is not running", HMC5883L_DEVICE_PATH); /* do a simple demand read */ sz = read(fd, &report, sizeof(report)); @@ -1388,10 +1400,10 @@ int calibrate() { int ret; - int fd = open(MAG_DEVICE_PATH, O_RDONLY); + int fd = open(HMC5883L_DEVICE_PATH, O_RDONLY); if (fd < 0) - err(1, "%s open failed (try 'hmc5883 start' if the driver is not running", MAG_DEVICE_PATH); + err(1, "%s open failed (try 'hmc5883 start' if the driver is not running", HMC5883L_DEVICE_PATH); if (OK != (ret = ioctl(fd, MAGIOCCALIBRATE, fd))) { warnx("failed to enable sensor calibration mode"); @@ -1413,7 +1425,7 @@ int calibrate() void reset() { - int fd = open(MAG_DEVICE_PATH, O_RDONLY); + int fd = open(HMC5883L_DEVICE_PATH, O_RDONLY); if (fd < 0) err(1, "failed "); diff --git a/src/drivers/l3gd20/l3gd20.cpp b/src/drivers/l3gd20/l3gd20.cpp index 8f5674823..670e51b97 100644 --- a/src/drivers/l3gd20/l3gd20.cpp +++ b/src/drivers/l3gd20/l3gd20.cpp @@ -66,6 +66,8 @@ #include <board_config.h> #include <mathlib/math/filter/LowPassFilter2p.hpp> +#define L3GD20_DEVICE_PATH "/dev/l3gd20" + /* oddly, ERROR is not defined for c++ */ #ifdef ERROR # undef ERROR @@ -92,9 +94,17 @@ static const int ERROR = -1; #define REG1_RATE_LP_MASK 0xF0 /* Mask to guard partial register update */ /* keep lowpass low to avoid noise issues */ #define RATE_95HZ_LP_25HZ ((0<<7) | (0<<6) | (0<<5) | (1<<4)) -#define RATE_190HZ_LP_25HZ ((0<<7) | (1<<6) | (1<<5) | (1<<4)) +#define RATE_190HZ_LP_25HZ ((0<<7) | (1<<6) | (0<<5) | (1<<4)) +#define RATE_190HZ_LP_50HZ ((0<<7) | (1<<6) | (1<<5) | (0<<4)) +#define RATE_190HZ_LP_70HZ ((0<<7) | (1<<6) | (1<<5) | (1<<4)) #define RATE_380HZ_LP_20HZ ((1<<7) | (0<<6) | (1<<5) | (0<<4)) +#define RATE_380HZ_LP_25HZ ((1<<7) | (0<<6) | (0<<5) | (1<<4)) +#define RATE_380HZ_LP_50HZ ((1<<7) | (0<<6) | (1<<5) | (0<<4)) +#define RATE_380HZ_LP_100HZ ((1<<7) | (0<<6) | (1<<5) | (1<<4)) #define RATE_760HZ_LP_30HZ ((1<<7) | (1<<6) | (0<<5) | (0<<4)) +#define RATE_760HZ_LP_35HZ ((1<<7) | (1<<6) | (0<<5) | (1<<4)) +#define RATE_760HZ_LP_50HZ ((1<<7) | (1<<6) | (1<<5) | (0<<4)) +#define RATE_760HZ_LP_100HZ ((1<<7) | (1<<6) | (1<<5) | (1<<4)) #define ADDR_CTRL_REG2 0x21 #define ADDR_CTRL_REG3 0x22 @@ -191,6 +201,7 @@ private: float _gyro_range_scale; float _gyro_range_rad_s; orb_advert_t _gyro_topic; + int _class_instance; unsigned _current_rate; unsigned _orientation; @@ -198,6 +209,8 @@ private: unsigned _read; perf_counter_t _sample_perf; + perf_counter_t _reschedules; + perf_counter_t _errors; math::LowPassFilter2p _gyro_filter_x; math::LowPassFilter2p _gyro_filter_y; @@ -219,6 +232,11 @@ private: void reset(); /** + * disable I2C on the chip + */ + void disable_i2c(); + + /** * Static trampoline from the hrt_call context; because we don't have a * generic hrt wrapper yet. * @@ -298,16 +316,19 @@ private: }; L3GD20::L3GD20(int bus, const char* path, spi_dev_e device) : - SPI("L3GD20", path, bus, device, SPIDEV_MODE3, 8000000), + SPI("L3GD20", path, bus, device, SPIDEV_MODE3, 11*1000*1000 /* will be rounded to 10.4 MHz, within margins for L3GD20 */), _call_interval(0), _reports(nullptr), _gyro_range_scale(0.0f), _gyro_range_rad_s(0.0f), _gyro_topic(-1), + _class_instance(-1), _current_rate(0), _orientation(SENSOR_BOARD_ROTATION_270_DEG), _read(0), _sample_perf(perf_alloc(PC_ELAPSED, "l3gd20_read")), + _reschedules(perf_alloc(PC_COUNT, "l3gd20_reschedules")), + _errors(perf_alloc(PC_COUNT, "l3gd20_errors")), _gyro_filter_x(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ), _gyro_filter_y(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ), _gyro_filter_z(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ) @@ -333,8 +354,13 @@ L3GD20::~L3GD20() if (_reports != nullptr) delete _reports; + if (_class_instance != -1) + unregister_class_devname(GYRO_DEVICE_PATH, _class_instance); + /* delete the perf counter */ perf_free(_sample_perf); + perf_free(_reschedules); + perf_free(_errors); } int @@ -352,10 +378,13 @@ L3GD20::init() if (_reports == nullptr) goto out; - /* advertise sensor topic */ - struct gyro_report zero_report; - memset(&zero_report, 0, sizeof(zero_report)); - _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &zero_report); + _class_instance = register_class_devname(GYRO_DEVICE_PATH); + if (_class_instance == CLASS_DEVICE_PRIMARY) { + /* advertise sensor topic */ + struct gyro_report zero_report; + memset(&zero_report, 0, sizeof(zero_report)); + _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &zero_report); + } reset(); @@ -574,6 +603,7 @@ L3GD20::read_reg(unsigned reg) uint8_t cmd[2]; cmd[0] = reg | DIR_READ; + cmd[1] = 0; transfer(cmd, cmd, sizeof(cmd)); @@ -653,16 +683,15 @@ L3GD20::set_samplerate(unsigned frequency) } else if (frequency <= 200) { _current_rate = 190; - bits |= RATE_190HZ_LP_25HZ; + bits |= RATE_190HZ_LP_50HZ; } else if (frequency <= 400) { _current_rate = 380; - bits |= RATE_380HZ_LP_20HZ; + bits |= RATE_380HZ_LP_50HZ; } else if (frequency <= 800) { _current_rate = 760; - bits |= RATE_760HZ_LP_30HZ; - + bits |= RATE_760HZ_LP_50HZ; } else { return -EINVAL; } @@ -700,12 +729,30 @@ L3GD20::stop() } void +L3GD20::disable_i2c(void) +{ + uint8_t retries = 10; + while (retries--) { + // add retries + uint8_t a = read_reg(0x05); + write_reg(0x05, (0x20 | a)); + if (read_reg(0x05) == (a | 0x20)) { + return; + } + } + debug("FAILED TO DISABLE I2C"); +} + +void L3GD20::reset() { + // ensure the chip doesn't interpret any other bus traffic as I2C + disable_i2c(); + /* set default configuration */ write_reg(ADDR_CTRL_REG1, REG1_POWER_NORMAL | REG1_Z_ENABLE | REG1_Y_ENABLE | REG1_X_ENABLE); write_reg(ADDR_CTRL_REG2, 0); /* disable high-pass filters */ - write_reg(ADDR_CTRL_REG3, 0); /* no interrupts - we don't use them */ + write_reg(ADDR_CTRL_REG3, 0x08); /* DRDY enable */ write_reg(ADDR_CTRL_REG4, REG4_BDU); write_reg(ADDR_CTRL_REG5, 0); @@ -716,7 +763,7 @@ L3GD20::reset() * callback fast enough to not miss data. */ write_reg(ADDR_FIFO_CTRL_REG, FIFO_CTRL_BYPASS_MODE); - set_samplerate(L3GD20_DEFAULT_RATE); + set_samplerate(0); // 760Hz set_range(L3GD20_DEFAULT_RANGE_DPS); set_driver_lowpass_filter(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ); @@ -732,9 +779,26 @@ L3GD20::measure_trampoline(void *arg) dev->measure(); } +#ifdef GPIO_EXTI_GYRO_DRDY +# define L3GD20_USE_DRDY 1 +#else +# define L3GD20_USE_DRDY 0 +#endif + void L3GD20::measure() { +#if L3GD20_USE_DRDY + // if the gyro doesn't have any data ready then re-schedule + // for 100 microseconds later. This ensures we don't double + // read a value and then miss the next value + if (stm32_gpioread(GPIO_EXTI_GYRO_DRDY) == 0) { + perf_count(_reschedules); + hrt_call_delay(&_call, 100); + return; + } +#endif + /* status register and data as read back from the device */ #pragma pack(push, 1) struct { @@ -753,9 +817,20 @@ L3GD20::measure() perf_begin(_sample_perf); /* fetch data from the sensor */ + memset(&raw_report, 0, sizeof(raw_report)); raw_report.cmd = ADDR_OUT_TEMP | DIR_READ | ADDR_INCREMENT; transfer((uint8_t *)&raw_report, (uint8_t *)&raw_report, sizeof(raw_report)); +#if L3GD20_USE_DRDY + if ((raw_report.status & 0xF) != 0xF) { + /* + we waited for DRDY, but did not see DRDY on all axes + when we captured. That means a transfer error of some sort + */ + perf_count(_errors); + return; + } +#endif /* * 1) Scale raw value to SI units using scaling from datasheet. * 2) Subtract static offset (in SI units) @@ -833,6 +908,8 @@ L3GD20::print_info() { printf("gyro reads: %u\n", _read); perf_print_counter(_sample_perf); + perf_print_counter(_reschedules); + perf_print_counter(_errors); _reports->print_info("report queue"); } @@ -883,7 +960,7 @@ start() errx(0, "already started"); /* create the driver */ - g_dev = new L3GD20(1 /* XXX magic number */, GYRO_DEVICE_PATH, (spi_dev_e)PX4_SPIDEV_GYRO); + g_dev = new L3GD20(1 /* SPI bus 1 */, L3GD20_DEVICE_PATH, (spi_dev_e)PX4_SPIDEV_GYRO); if (g_dev == nullptr) goto fail; @@ -892,7 +969,7 @@ start() goto fail; /* set the poll rate to default, starts automatic data collection */ - fd = open(GYRO_DEVICE_PATH, O_RDONLY); + fd = open(L3GD20_DEVICE_PATH, O_RDONLY); if (fd < 0) goto fail; @@ -900,6 +977,8 @@ start() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) goto fail; + close(fd); + exit(0); fail: @@ -924,10 +1003,10 @@ test() ssize_t sz; /* get the driver */ - fd_gyro = open(GYRO_DEVICE_PATH, O_RDONLY); + fd_gyro = open(L3GD20_DEVICE_PATH, O_RDONLY); if (fd_gyro < 0) - err(1, "%s open failed", GYRO_DEVICE_PATH); + err(1, "%s open failed", L3GD20_DEVICE_PATH); /* reset to manual polling */ if (ioctl(fd_gyro, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MANUAL) < 0) @@ -948,6 +1027,8 @@ test() warnx("gyro range: %8.4f rad/s (%d deg/s)", (double)g_report.range_rad_s, (int)((g_report.range_rad_s / M_PI_F) * 180.0f + 0.5f)); + close(fd_gyro); + /* XXX add poll-rate tests here too */ reset(); @@ -960,7 +1041,7 @@ test() void reset() { - int fd = open(GYRO_DEVICE_PATH, O_RDONLY); + int fd = open(L3GD20_DEVICE_PATH, O_RDONLY); if (fd < 0) err(1, "failed "); @@ -971,6 +1052,8 @@ reset() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) err(1, "accel pollrate reset failed"); + close(fd); + exit(0); } diff --git a/src/drivers/lsm303d/lsm303d.cpp b/src/drivers/lsm303d/lsm303d.cpp index 60601e22c..969b5e25f 100644 --- a/src/drivers/lsm303d/lsm303d.cpp +++ b/src/drivers/lsm303d/lsm303d.cpp @@ -39,6 +39,7 @@ #include <nuttx/config.h> #include <sys/types.h> +#include <sys/stat.h> #include <stdint.h> #include <stdbool.h> #include <stddef.h> @@ -63,6 +64,7 @@ #include <drivers/drv_accel.h> #include <drivers/drv_mag.h> #include <drivers/device/ringbuffer.h> +#include <drivers/drv_tone_alarm.h> #include <board_config.h> #include <mathlib/math/filter/LowPassFilter2p.hpp> @@ -78,23 +80,29 @@ static const int ERROR = -1; #define DIR_WRITE (0<<7) #define ADDR_INCREMENT (1<<6) - +#define LSM303D_DEVICE_PATH_ACCEL "/dev/lsm303d_accel" +#define LSM303D_DEVICE_PATH_MAG "/dev/lsm303d_mag" /* register addresses: A: accel, M: mag, T: temp */ #define ADDR_WHO_AM_I 0x0F -#define WHO_I_AM 0x49 - -#define ADDR_OUT_L_T 0x05 -#define ADDR_OUT_H_T 0x06 -#define ADDR_STATUS_M 0x07 -#define ADDR_OUT_X_L_M 0x08 -#define ADDR_OUT_X_H_M 0x09 -#define ADDR_OUT_Y_L_M 0x0A -#define ADDR_OUT_Y_H_M 0x0B -#define ADDR_OUT_Z_L_M 0x0C -#define ADDR_OUT_Z_H_M 0x0D - -#define ADDR_OUT_TEMP_A 0x26 +#define WHO_I_AM 0x49 + +#define ADDR_OUT_TEMP_L 0x05 +#define ADDR_OUT_TEMP_H 0x06 +#define ADDR_STATUS_M 0x07 +#define ADDR_OUT_X_L_M 0x08 +#define ADDR_OUT_X_H_M 0x09 +#define ADDR_OUT_Y_L_M 0x0A +#define ADDR_OUT_Y_H_M 0x0B +#define ADDR_OUT_Z_L_M 0x0C +#define ADDR_OUT_Z_H_M 0x0D + +#define ADDR_INT_CTRL_M 0x12 +#define ADDR_INT_SRC_M 0x13 +#define ADDR_REFERENCE_X 0x1c +#define ADDR_REFERENCE_Y 0x1d +#define ADDR_REFERENCE_Z 0x1e + #define ADDR_STATUS_A 0x27 #define ADDR_OUT_X_L_A 0x28 #define ADDR_OUT_X_H_A 0x29 @@ -112,6 +120,26 @@ static const int ERROR = -1; #define ADDR_CTRL_REG6 0x25 #define ADDR_CTRL_REG7 0x26 +#define ADDR_FIFO_CTRL 0x2e +#define ADDR_FIFO_SRC 0x2f + +#define ADDR_IG_CFG1 0x30 +#define ADDR_IG_SRC1 0x31 +#define ADDR_IG_THS1 0x32 +#define ADDR_IG_DUR1 0x33 +#define ADDR_IG_CFG2 0x34 +#define ADDR_IG_SRC2 0x35 +#define ADDR_IG_THS2 0x36 +#define ADDR_IG_DUR2 0x37 +#define ADDR_CLICK_CFG 0x38 +#define ADDR_CLICK_SRC 0x39 +#define ADDR_CLICK_THS 0x3a +#define ADDR_TIME_LIMIT 0x3b +#define ADDR_TIME_LATENCY 0x3c +#define ADDR_TIME_WINDOW 0x3d +#define ADDR_ACT_THS 0x3e +#define ADDR_ACT_DUR 0x3f + #define REG1_RATE_BITS_A ((1<<7) | (1<<6) | (1<<5) | (1<<4)) #define REG1_POWERDOWN_A ((0<<7) | (0<<6) | (0<<5) | (0<<4)) #define REG1_RATE_3_125HZ_A ((0<<7) | (0<<6) | (0<<5) | (1<<4)) @@ -201,6 +229,21 @@ public: */ void print_info(); + /** + * dump register values + */ + void print_registers(); + + /** + * toggle logging + */ + void toggle_logging(); + + /** + * check for extreme accel values + */ + void check_extremes(const accel_report *arb); + protected: virtual int probe(); @@ -234,7 +277,7 @@ private: unsigned _mag_samplerate; orb_advert_t _accel_topic; - orb_advert_t _mag_topic; + int _class_instance; unsigned _accel_read; unsigned _mag_read; @@ -243,6 +286,8 @@ private: perf_counter_t _mag_sample_perf; perf_counter_t _reg7_resets; perf_counter_t _reg1_resets; + perf_counter_t _extreme_values; + perf_counter_t _accel_reschedules; math::LowPassFilter2p _accel_filter_x; math::LowPassFilter2p _accel_filter_y; @@ -253,6 +298,15 @@ private: uint8_t _reg7_expected; uint8_t _reg1_expected; + // accel logging + int _accel_log_fd; + bool _accel_logging_enabled; + uint64_t _last_extreme_us; + uint64_t _last_log_us; + uint64_t _last_log_sync_us; + uint64_t _last_log_reg_us; + uint64_t _last_log_alarm_us; + /** * Start automatic measurement. */ @@ -271,6 +325,11 @@ private: void reset(); /** + * disable I2C on the chip + */ + void disable_i2c(); + + /** * Static trampoline from the hrt_call context; because we don't have a * generic hrt wrapper yet. * @@ -408,6 +467,8 @@ public: virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); virtual int ioctl(struct file *filp, int cmd, unsigned long arg); + virtual int init(); + protected: friend class LSM303D; @@ -415,6 +476,9 @@ protected: private: LSM303D *_parent; + orb_advert_t _mag_topic; + int _mag_class_instance; + void measure(); void measure_trampoline(void *arg); @@ -422,7 +486,7 @@ private: LSM303D::LSM303D(int bus, const char* path, spi_dev_e device) : - SPI("LSM303D", path, bus, device, SPIDEV_MODE3, 8000000), + SPI("LSM303D", path, bus, device, SPIDEV_MODE3, 11*1000*1000 /* will be rounded to 10.4 MHz, within safety margins for LSM303D */), _mag(new LSM303D_mag(this)), _call_accel_interval(0), _call_mag_interval(0), @@ -436,18 +500,26 @@ LSM303D::LSM303D(int bus, const char* path, spi_dev_e device) : _mag_range_scale(0.0f), _mag_samplerate(0), _accel_topic(-1), - _mag_topic(-1), + _class_instance(-1), _accel_read(0), _mag_read(0), _accel_sample_perf(perf_alloc(PC_ELAPSED, "lsm303d_accel_read")), _mag_sample_perf(perf_alloc(PC_ELAPSED, "lsm303d_mag_read")), _reg1_resets(perf_alloc(PC_COUNT, "lsm303d_reg1_resets")), _reg7_resets(perf_alloc(PC_COUNT, "lsm303d_reg7_resets")), + _extreme_values(perf_alloc(PC_COUNT, "lsm303d_extremes")), + _accel_reschedules(perf_alloc(PC_COUNT, "lsm303d_accel_resched")), _accel_filter_x(LSM303D_ACCEL_DEFAULT_RATE, LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_y(LSM303D_ACCEL_DEFAULT_RATE, LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_z(LSM303D_ACCEL_DEFAULT_RATE, LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _reg1_expected(0), - _reg7_expected(0) + _reg7_expected(0), + _accel_log_fd(-1), + _accel_logging_enabled(false), + _last_log_us(0), + _last_log_sync_us(0), + _last_log_reg_us(0), + _last_log_alarm_us(0) { // enable debug() calls _debug_enabled = true; @@ -479,11 +551,17 @@ LSM303D::~LSM303D() if (_mag_reports != nullptr) delete _mag_reports; + if (_class_instance != -1) + unregister_class_devname(ACCEL_DEVICE_PATH, _class_instance); + delete _mag; /* delete the perf counter */ perf_free(_accel_sample_perf); perf_free(_mag_sample_perf); + perf_free(_reg1_resets); + perf_free(_reg7_resets); + perf_free(_extreme_values); } int @@ -505,10 +583,6 @@ LSM303D::init() goto out; /* advertise accel topic */ - struct accel_report zero_report; - memset(&zero_report, 0, sizeof(zero_report)); - _accel_topic = orb_advertise(ORB_ID(sensor_accel), &zero_report); - _mag_reports = new RingBuffer(2, sizeof(mag_report)); if (_mag_reports == nullptr) @@ -516,26 +590,45 @@ LSM303D::init() reset(); - /* advertise mag topic */ - struct mag_report zero_mag_report; - memset(&zero_mag_report, 0, sizeof(zero_mag_report)); - _mag_topic = orb_advertise(ORB_ID(sensor_mag), &zero_mag_report); - - /* do CDev init for the mag device node, keep it optional */ - mag_ret = _mag->init(); + /* do CDev init for the mag device node */ + ret = _mag->init(); + if (ret != OK) { + warnx("MAG init failed"); + goto out; + } - if (mag_ret != OK) { - _mag_topic = -1; + _class_instance = register_class_devname(ACCEL_DEVICE_PATH); + if (_class_instance == CLASS_DEVICE_PRIMARY) { + // we are the primary accel device, so advertise to + // the ORB + struct accel_report zero_report; + memset(&zero_report, 0, sizeof(zero_report)); + _accel_topic = orb_advertise(ORB_ID(sensor_accel), &zero_report); } - ret = OK; out: return ret; } void +LSM303D::disable_i2c(void) +{ + uint8_t a = read_reg(0x02); + write_reg(0x02, (0x10 | a)); + a = read_reg(0x02); + write_reg(0x02, (0xF7 & a)); + a = read_reg(0x15); + write_reg(0x15, (0x80 | a)); + a = read_reg(0x02); + write_reg(0x02, (0xE7 & a)); +} + +void LSM303D::reset() { + // ensure the chip doesn't interpret any other bus traffic as I2C + disable_i2c(); + /* enable accel*/ _reg1_expected = REG1_X_ENABLE_A | REG1_Y_ENABLE_A | REG1_Z_ENABLE_A | REG1_BDU_UPDATE | REG1_RATE_800HZ_A; write_reg(ADDR_CTRL_REG1, _reg1_expected); @@ -544,10 +637,17 @@ LSM303D::reset() _reg7_expected = REG7_CONT_MODE_M; write_reg(ADDR_CTRL_REG7, _reg7_expected); write_reg(ADDR_CTRL_REG5, REG5_RES_HIGH_M); + write_reg(ADDR_CTRL_REG3, 0x04); // DRDY on ACCEL on INT1 + write_reg(ADDR_CTRL_REG4, 0x04); // DRDY on MAG on INT2 accel_set_range(LSM303D_ACCEL_DEFAULT_RANGE_G); accel_set_samplerate(LSM303D_ACCEL_DEFAULT_RATE); accel_set_driver_lowpass_filter((float)LSM303D_ACCEL_DEFAULT_RATE, (float)LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ); + + // we setup the anti-alias on-chip filter as 50Hz. We believe + // this operates in the analog domain, and is critical for + // anti-aliasing. The 2 pole software filter is designed to + // operate in conjunction with this on-chip filter accel_set_onchip_lowpass_filter_bandwidth(LSM303D_ACCEL_DEFAULT_ONCHIP_FILTER_FREQ); mag_set_range(LSM303D_MAG_DEFAULT_RANGE_GA); @@ -572,6 +672,122 @@ LSM303D::probe() return -EIO; } +#define ACCEL_LOGFILE "/fs/microsd/lsm303d.log" + +/** + check for extreme accelerometer values and log to a file on the SD card + */ +void +LSM303D::check_extremes(const accel_report *arb) +{ + const float extreme_threshold = 30; + static bool boot_ok = false; + bool is_extreme = (fabsf(arb->x) > extreme_threshold && + fabsf(arb->y) > extreme_threshold && + fabsf(arb->z) > extreme_threshold); + if (is_extreme) { + perf_count(_extreme_values); + // force accel logging on if we see extreme values + _accel_logging_enabled = true; + } else { + boot_ok = true; + } + + if (! _accel_logging_enabled) { + // logging has been disabled by user, close + if (_accel_log_fd != -1) { + ::close(_accel_log_fd); + _accel_log_fd = -1; + } + return; + } + if (_accel_log_fd == -1) { + // keep last 10 logs + ::unlink(ACCEL_LOGFILE ".9"); + for (uint8_t i=8; i>0; i--) { + uint8_t len = strlen(ACCEL_LOGFILE)+3; + char log1[len], log2[len]; + snprintf(log1, sizeof(log1), "%s.%u", ACCEL_LOGFILE, (unsigned)i); + snprintf(log2, sizeof(log2), "%s.%u", ACCEL_LOGFILE, (unsigned)(i+1)); + ::rename(log1, log2); + } + ::rename(ACCEL_LOGFILE, ACCEL_LOGFILE ".1"); + + // open the new logfile + _accel_log_fd = ::open(ACCEL_LOGFILE, O_WRONLY|O_CREAT|O_TRUNC, 0666); + if (_accel_log_fd == -1) { + return; + } + } + + uint64_t now = hrt_absolute_time(); + // log accels at 1Hz + if (_last_log_us == 0 || + now - _last_log_us > 1000*1000) { + _last_log_us = now; + ::dprintf(_accel_log_fd, "ARB %llu %.3f %.3f %.3f %d %d %d boot_ok=%u\r\n", + (unsigned long long)arb->timestamp, + arb->x, arb->y, arb->z, + (int)arb->x_raw, + (int)arb->y_raw, + (int)arb->z_raw, + (unsigned)boot_ok); + } + + const uint8_t reglist[] = { ADDR_WHO_AM_I, 0x02, 0x15, ADDR_STATUS_A, ADDR_STATUS_M, ADDR_CTRL_REG0, ADDR_CTRL_REG1, + ADDR_CTRL_REG2, ADDR_CTRL_REG3, ADDR_CTRL_REG4, ADDR_CTRL_REG5, ADDR_CTRL_REG6, + ADDR_CTRL_REG7, ADDR_OUT_TEMP_L, ADDR_OUT_TEMP_H, ADDR_INT_CTRL_M, ADDR_INT_SRC_M, + ADDR_REFERENCE_X, ADDR_REFERENCE_Y, ADDR_REFERENCE_Z, ADDR_OUT_X_L_A, ADDR_OUT_X_H_A, + ADDR_OUT_Y_L_A, ADDR_OUT_Y_H_A, ADDR_OUT_Z_L_A, ADDR_OUT_Z_H_A, ADDR_FIFO_CTRL, + ADDR_FIFO_SRC, ADDR_IG_CFG1, ADDR_IG_SRC1, ADDR_IG_THS1, ADDR_IG_DUR1, ADDR_IG_CFG2, + ADDR_IG_SRC2, ADDR_IG_THS2, ADDR_IG_DUR2, ADDR_CLICK_CFG, ADDR_CLICK_SRC, + ADDR_CLICK_THS, ADDR_TIME_LIMIT, ADDR_TIME_LATENCY, ADDR_TIME_WINDOW, + ADDR_ACT_THS, ADDR_ACT_DUR, + ADDR_OUT_X_L_M, ADDR_OUT_X_H_M, + ADDR_OUT_Y_L_M, ADDR_OUT_Y_H_M, ADDR_OUT_Z_L_M, ADDR_OUT_Z_H_M, 0x02, 0x15, ADDR_WHO_AM_I}; + uint8_t regval[sizeof(reglist)]; + for (uint8_t i=0; i<sizeof(reglist); i++) { + regval[i] = read_reg(reglist[i]); + } + + // log registers at 10Hz when we have extreme values, or 0.5 Hz without + if (_last_log_reg_us == 0 || + (is_extreme && (now - _last_log_reg_us > 250*1000)) || + (now - _last_log_reg_us > 10*1000*1000)) { + _last_log_reg_us = now; + ::dprintf(_accel_log_fd, "XREG %llu", (unsigned long long)hrt_absolute_time()); + for (uint8_t i=0; i<sizeof(reglist); i++) { + ::dprintf(_accel_log_fd, " %02x:%02x", (unsigned)reglist[i], (unsigned)regval[i]); + } + ::dprintf(_accel_log_fd, "\n"); + } + + // fsync at 0.1Hz + if (now - _last_log_sync_us > 10*1000*1000) { + _last_log_sync_us = now; + ::fsync(_accel_log_fd); + } + + // play alarm every 10s if we have had an extreme value + if (perf_event_count(_extreme_values) != 0 && + (now - _last_log_alarm_us > 10*1000*1000)) { + _last_log_alarm_us = now; + int tfd = ::open(TONEALARM_DEVICE_PATH, 0); + if (tfd != -1) { + uint8_t tone = 3; + if (!is_extreme) { + tone = 3; + } else if (boot_ok) { + tone = 4; + } else { + tone = 5; + } + ::ioctl(tfd, TONE_SET_ALARM, tone); + ::close(tfd); + } + } +} + ssize_t LSM303D::read(struct file *filp, char *buffer, size_t buflen) { @@ -590,6 +806,7 @@ LSM303D::read(struct file *filp, char *buffer, size_t buflen) */ while (count--) { if (_accel_reports->get(arb)) { + check_extremes(arb); ret += sizeof(*arb); arb++; } @@ -952,6 +1169,7 @@ LSM303D::read_reg(unsigned reg) uint8_t cmd[2]; cmd[0] = reg | DIR_READ; + cmd[1] = 0; transfer(cmd, cmd, sizeof(cmd)); @@ -1224,6 +1442,14 @@ LSM303D::mag_measure_trampoline(void *arg) void LSM303D::measure() { + // if the accel doesn't have any data ready then re-schedule + // for 100 microseconds later. This ensures we don't double + // read a value and then miss the next value + if (stm32_gpioread(GPIO_EXTI_ACCEL_DRDY) == 0) { + perf_count(_accel_reschedules); + hrt_call_delay(&_accel_call, 100); + return; + } if (read_reg(ADDR_CTRL_REG1) != _reg1_expected) { perf_count(_reg1_resets); reset(); @@ -1248,6 +1474,7 @@ LSM303D::measure() perf_begin(_accel_sample_perf); /* fetch data from the sensor */ + memset(&raw_accel_report, 0, sizeof(raw_accel_report)); raw_accel_report.cmd = ADDR_STATUS_A | DIR_READ | ADDR_INCREMENT; transfer((uint8_t *)&raw_accel_report, (uint8_t *)&raw_accel_report, sizeof(raw_accel_report)); @@ -1290,8 +1517,10 @@ LSM303D::measure() /* notify anyone waiting for data */ poll_notify(POLLIN); - /* publish for subscribers */ - orb_publish(ORB_ID(sensor_accel), _accel_topic, &accel_report); + if (_accel_topic != -1) { + /* publish for subscribers */ + orb_publish(ORB_ID(sensor_accel), _accel_topic, &accel_report); + } _accel_read++; @@ -1325,6 +1554,7 @@ LSM303D::mag_measure() perf_begin(_mag_sample_perf); /* fetch data from the sensor */ + memset(&raw_mag_report, 0, sizeof(raw_mag_report)); raw_mag_report.cmd = ADDR_STATUS_M | DIR_READ | ADDR_INCREMENT; transfer((uint8_t *)&raw_mag_report, (uint8_t *)&raw_mag_report, sizeof(raw_mag_report)); @@ -1361,8 +1591,10 @@ LSM303D::mag_measure() /* notify anyone waiting for data */ poll_notify(POLLIN); - /* publish for subscribers */ - orb_publish(ORB_ID(sensor_mag), _mag_topic, &mag_report); + if (_mag->_mag_topic != -1) { + /* publish for subscribers */ + orb_publish(ORB_ID(sensor_mag), _mag->_mag_topic, &mag_report); + } _mag_read++; @@ -1380,14 +1612,111 @@ LSM303D::print_info() _mag_reports->print_info("mag reports"); } +void +LSM303D::print_registers() +{ + const struct { + uint8_t reg; + const char *name; + } regmap[] = { + { ADDR_WHO_AM_I, "WHO_AM_I" }, + { 0x02, "I2C_CONTROL1" }, + { 0x15, "I2C_CONTROL2" }, + { ADDR_STATUS_A, "STATUS_A" }, + { ADDR_STATUS_M, "STATUS_M" }, + { ADDR_CTRL_REG0, "CTRL_REG0" }, + { ADDR_CTRL_REG1, "CTRL_REG1" }, + { ADDR_CTRL_REG2, "CTRL_REG2" }, + { ADDR_CTRL_REG3, "CTRL_REG3" }, + { ADDR_CTRL_REG4, "CTRL_REG4" }, + { ADDR_CTRL_REG5, "CTRL_REG5" }, + { ADDR_CTRL_REG6, "CTRL_REG6" }, + { ADDR_CTRL_REG7, "CTRL_REG7" }, + { ADDR_OUT_TEMP_L, "TEMP_L" }, + { ADDR_OUT_TEMP_H, "TEMP_H" }, + { ADDR_INT_CTRL_M, "INT_CTRL_M" }, + { ADDR_INT_SRC_M, "INT_SRC_M" }, + { ADDR_REFERENCE_X, "REFERENCE_X" }, + { ADDR_REFERENCE_Y, "REFERENCE_Y" }, + { ADDR_REFERENCE_Z, "REFERENCE_Z" }, + { ADDR_OUT_X_L_A, "ACCEL_XL" }, + { ADDR_OUT_X_H_A, "ACCEL_XH" }, + { ADDR_OUT_Y_L_A, "ACCEL_YL" }, + { ADDR_OUT_Y_H_A, "ACCEL_YH" }, + { ADDR_OUT_Z_L_A, "ACCEL_ZL" }, + { ADDR_OUT_Z_H_A, "ACCEL_ZH" }, + { ADDR_FIFO_CTRL, "FIFO_CTRL" }, + { ADDR_FIFO_SRC, "FIFO_SRC" }, + { ADDR_IG_CFG1, "IG_CFG1" }, + { ADDR_IG_SRC1, "IG_SRC1" }, + { ADDR_IG_THS1, "IG_THS1" }, + { ADDR_IG_DUR1, "IG_DUR1" }, + { ADDR_IG_CFG2, "IG_CFG2" }, + { ADDR_IG_SRC2, "IG_SRC2" }, + { ADDR_IG_THS2, "IG_THS2" }, + { ADDR_IG_DUR2, "IG_DUR2" }, + { ADDR_CLICK_CFG, "CLICK_CFG" }, + { ADDR_CLICK_SRC, "CLICK_SRC" }, + { ADDR_CLICK_THS, "CLICK_THS" }, + { ADDR_TIME_LIMIT, "TIME_LIMIT" }, + { ADDR_TIME_LATENCY,"TIME_LATENCY" }, + { ADDR_TIME_WINDOW, "TIME_WINDOW" }, + { ADDR_ACT_THS, "ACT_THS" }, + { ADDR_ACT_DUR, "ACT_DUR" } + }; + for (uint8_t i=0; i<sizeof(regmap)/sizeof(regmap[0]); i++) { + printf("0x%02x %s\n", read_reg(regmap[i].reg), regmap[i].name); + } + printf("_reg1_expected=0x%02x\n", _reg1_expected); + printf("_reg7_expected=0x%02x\n", _reg7_expected); +} + +void +LSM303D::toggle_logging() +{ + if (! _accel_logging_enabled) { + _accel_logging_enabled = true; + printf("Started logging to %s\n", ACCEL_LOGFILE); + } else { + _accel_logging_enabled = false; + printf("Stopped logging\n"); + } +} + LSM303D_mag::LSM303D_mag(LSM303D *parent) : - CDev("LSM303D_mag", MAG_DEVICE_PATH), - _parent(parent) + CDev("LSM303D_mag", LSM303D_DEVICE_PATH_MAG), + _parent(parent), + _mag_topic(-1), + _mag_class_instance(-1) { } LSM303D_mag::~LSM303D_mag() { + if (_mag_class_instance != -1) + unregister_class_devname(MAG_DEVICE_PATH, _mag_class_instance); +} + +int +LSM303D_mag::init() +{ + int ret; + + ret = CDev::init(); + if (ret != OK) + goto out; + + _mag_class_instance = register_class_devname(MAG_DEVICE_PATH); + if (_mag_class_instance == CLASS_DEVICE_PRIMARY) { + // we are the primary mag device, so advertise to + // the ORB + struct mag_report zero_report; + memset(&zero_report, 0, sizeof(zero_report)); + _mag_topic = orb_advertise(ORB_ID(sensor_mag), &zero_report); + } + +out: + return ret; } void @@ -1432,6 +1761,8 @@ void start(); void test(); void reset(); void info(); +void regdump(); +void logging(); /** * Start the driver. @@ -1445,7 +1776,7 @@ start() errx(0, "already started"); /* create the driver */ - g_dev = new LSM303D(1 /* XXX magic number */, ACCEL_DEVICE_PATH, (spi_dev_e)PX4_SPIDEV_ACCEL_MAG); + g_dev = new LSM303D(1 /* SPI dev 1 */, LSM303D_DEVICE_PATH_ACCEL, (spi_dev_e)PX4_SPIDEV_ACCEL_MAG); if (g_dev == nullptr) { warnx("failed instantiating LSM303D obj"); @@ -1456,7 +1787,7 @@ start() goto fail; /* set the poll rate to default, starts automatic data collection */ - fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + fd = open(LSM303D_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) goto fail; @@ -1464,7 +1795,7 @@ start() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) goto fail; - fd_mag = open(MAG_DEVICE_PATH, O_RDONLY); + fd_mag = open(LSM303D_DEVICE_PATH_MAG, O_RDONLY); /* don't fail if open cannot be opened */ if (0 <= fd_mag) { @@ -1473,6 +1804,8 @@ start() } } + close(fd); + close(fd_mag); exit(0); fail: @@ -1499,10 +1832,10 @@ test() int ret; /* get the driver */ - fd_accel = open(ACCEL_DEVICE_PATH, O_RDONLY); + fd_accel = open(LSM303D_DEVICE_PATH_ACCEL, O_RDONLY); if (fd_accel < 0) - err(1, "%s open failed", ACCEL_DEVICE_PATH); + err(1, "%s open failed", LSM303D_DEVICE_PATH_ACCEL); /* do a simple demand read */ sz = read(fd_accel, &accel_report, sizeof(accel_report)); @@ -1528,10 +1861,10 @@ test() struct mag_report m_report; /* get the driver */ - fd_mag = open(MAG_DEVICE_PATH, O_RDONLY); + fd_mag = open(LSM303D_DEVICE_PATH_MAG, O_RDONLY); if (fd_mag < 0) - err(1, "%s open failed", MAG_DEVICE_PATH); + err(1, "%s open failed", LSM303D_DEVICE_PATH_MAG); /* check if mag is onboard or external */ if ((ret = ioctl(fd_mag, MAGIOCGEXTERNAL, 0)) < 0) @@ -1554,6 +1887,9 @@ test() /* XXX add poll-rate tests here too */ + close(fd_accel); + close(fd_mag); + reset(); errx(0, "PASS"); } @@ -1564,7 +1900,7 @@ test() void reset() { - int fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + int fd = open(LSM303D_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) err(1, "failed "); @@ -1575,7 +1911,9 @@ reset() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) err(1, "accel pollrate reset failed"); - fd = open(MAG_DEVICE_PATH, O_RDONLY); + close(fd); + + fd = open(LSM303D_DEVICE_PATH_MAG, O_RDONLY); if (fd < 0) { warnx("mag could not be opened, external mag might be used"); @@ -1585,6 +1923,8 @@ reset() err(1, "mag pollrate reset failed"); } + close(fd); + exit(0); } @@ -1603,6 +1943,35 @@ info() exit(0); } +/** + * dump registers from device + */ +void +regdump() +{ + if (g_dev == nullptr) + errx(1, "driver not running\n"); + + printf("regdump @ %p\n", g_dev); + g_dev->print_registers(); + + exit(0); +} + +/** + * toggle logging + */ +void +logging() +{ + if (g_dev == nullptr) + errx(1, "driver not running\n"); + + g_dev->toggle_logging(); + + exit(0); +} + } // namespace @@ -1634,5 +2003,17 @@ lsm303d_main(int argc, char *argv[]) if (!strcmp(argv[1], "info")) lsm303d::info(); - errx(1, "unrecognized command, try 'start', 'test', 'reset' or 'info'"); + /* + * dump device registers + */ + if (!strcmp(argv[1], "regdump")) + lsm303d::regdump(); + + /* + * dump device registers + */ + if (!strcmp(argv[1], "logging")) + lsm303d::logging(); + + errx(1, "unrecognized command, try 'start', 'test', 'reset', 'info', 'logging' or 'regdump'"); } diff --git a/src/drivers/mkblctrl/mkblctrl.cpp b/src/drivers/mkblctrl/mkblctrl.cpp index b93f38cf6..30d6069b3 100644 --- a/src/drivers/mkblctrl/mkblctrl.cpp +++ b/src/drivers/mkblctrl/mkblctrl.cpp @@ -1,6 +1,7 @@ /**************************************************************************** * * Copyright (C) 2012,2013 PX4 Development Team. All rights reserved. + * Author: Marco Bauer <marco@wtns.de> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,7 +36,8 @@ * @file mkblctrl.cpp * * Driver/configurator for the Mikrokopter BL-Ctrl. - * Marco Bauer + * + * @author Marco Bauer <marco@wtns.de> * */ @@ -73,7 +75,6 @@ #include <drivers/drv_mixer.h> #include <uORB/topics/actuator_controls.h> -#include <uORB/topics/actuator_controls_effective.h> #include <uORB/topics/actuator_outputs.h> #include <uORB/topics/actuator_armed.h> #include <uORB/topics/esc_status.h> @@ -89,8 +90,8 @@ #define BLCTRL_MIN_VALUE -0.920F #define MOTOR_STATE_PRESENT_MASK 0x80 #define MOTOR_STATE_ERROR_MASK 0x7F -#define MOTOR_SPINUP_COUNTER 2500 -#define ESC_UORB_PUBLISH_DELAY 200 +#define MOTOR_SPINUP_COUNTER 30 +#define ESC_UORB_PUBLISH_DELAY 500000 class MK : public device::I2C { @@ -112,7 +113,7 @@ public: FRAME_X, }; - MK(int bus); + MK(int bus, const char *_device_path); ~MK(); virtual int ioctl(file *filp, int cmd, unsigned long arg); @@ -126,7 +127,7 @@ public: int set_overrideSecurityChecks(bool overrideSecurityChecks); int set_px4mode(int px4mode); int set_frametype(int frametype); - unsigned int mk_check_for_blctrl(unsigned int count, bool showOutput); + unsigned int mk_check_for_blctrl(unsigned int count, bool showOutput, bool initI2C); private: static const unsigned _max_actuators = MAX_MOTORS; @@ -141,9 +142,9 @@ private: unsigned int _motor; int _px4mode; int _frametype; + char _device[20]; ///< device orb_advert_t _t_outputs; - orb_advert_t _t_actuators_effective; orb_advert_t _t_esc_status; unsigned int _num_outputs; @@ -244,7 +245,7 @@ MK *g_mk; } // namespace -MK::MK(int bus) : +MK::MK(int bus, const char *_device_path) : I2C("mkblctrl", "/dev/mkblctrl", bus, 0, I2C_BUS_SPEED), _mode(MODE_NONE), _update_rate(50), @@ -252,7 +253,6 @@ MK::MK(int bus) : _t_actuators(-1), _t_actuator_armed(-1), _t_outputs(0), - _t_actuators_effective(0), _t_esc_status(0), _num_outputs(0), _motortest(false), @@ -265,6 +265,10 @@ MK::MK(int bus) : _armed(false), _mixers(nullptr) { + strncpy(_device, _device_path, sizeof(_device)); + /* enforce null termination */ + _device[sizeof(_device) - 1] = '\0'; + _debug_enabled = true; } @@ -291,7 +295,7 @@ MK::~MK() /* clean up the alternate device node */ if (_primary_pwm_device) - unregister_driver(PWM_OUTPUT_DEVICE_PATH); + unregister_driver(_device); g_mk = nullptr; } @@ -313,13 +317,15 @@ MK::init(unsigned motors) usleep(500000); - /* try to claim the generic PWM output device node as well - it's OK if we fail at this */ - ret = register_driver(PWM_OUTPUT_DEVICE_PATH, &fops, 0666, (void *)this); + if (sizeof(_device) > 0) { + ret = register_driver(_device, &fops, 0666, (void *)this); - if (ret == OK) { - log("default PWM output device"); - _primary_pwm_device = true; - } + if (ret == OK) { + log("creating alternate output device"); + _primary_pwm_device = true; + } + + } /* reset GPIOs */ gpio_reset(); @@ -525,13 +531,6 @@ MK::task_main() _t_outputs = orb_advertise(_primary_pwm_device ? ORB_ID_VEHICLE_CONTROLS : ORB_ID(actuator_outputs_1), &outputs); - /* advertise the effective control inputs */ - actuator_controls_effective_s controls_effective; - memset(&controls_effective, 0, sizeof(controls_effective)); - /* advertise the effective control inputs */ - _t_actuators_effective = orb_advertise(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE : ORB_ID(actuator_controls_effective_1), - &controls_effective); - /* advertise the blctrl status */ esc_status_s esc; memset(&esc, 0, sizeof(esc)); @@ -595,9 +594,6 @@ MK::task_main() outputs.noutputs = _mixers->mix(&outputs.output[0], _num_outputs); outputs.timestamp = hrt_absolute_time(); - // XXX output actual limited values - memcpy(&controls_effective, &_controls, sizeof(controls_effective)); - /* iterate actuators */ for (unsigned int i = 0; i < _num_outputs; i++) { @@ -633,10 +629,7 @@ MK::task_main() } /* output to BLCtrl's */ - if (_motortest == true) { - mk_servo_test(i); - - } else { + if (_motortest != true) { //mk_servo_set_value(i, scaling(outputs.output[i], -1.0f, 1.0f, 0, 1024)); // scale the output to 0 - 1024 and sent to output routine // 11 Bit Motor[i].SetPoint_PX4 = outputs.output[i]; @@ -668,7 +661,7 @@ MK::task_main() * Only update esc topic every half second. */ - if (hrt_absolute_time() - esc.timestamp > 500000) { + if (hrt_absolute_time() - esc.timestamp > ESC_UORB_PUBLISH_DELAY) { esc.counter++; esc.timestamp = hrt_absolute_time(); esc.esc_count = (uint8_t) _num_outputs; @@ -692,16 +685,22 @@ MK::task_main() esc.esc[i].esc_temperature = (uint16_t) Motor[i].Temperature; esc.esc[i].esc_state = (uint16_t) Motor[i].State; esc.esc[i].esc_errorcount = (uint16_t) 0; + + // if motortest is requested - do it... + if (_motortest == true) { + mk_servo_test(i); + } + } orb_publish(ORB_ID(esc_status), _t_esc_status, &esc); + } } - //::close(_t_esc_status); + ::close(_t_esc_status); ::close(_t_actuators); - ::close(_t_actuators_effective); ::close(_t_actuator_armed); @@ -727,8 +726,12 @@ MK::mk_servo_arm(bool status) unsigned int -MK::mk_check_for_blctrl(unsigned int count, bool showOutput) +MK::mk_check_for_blctrl(unsigned int count, bool showOutput, bool initI2C) { + if(initI2C) { + I2C::init(); + } + _retries = 50; uint8_t foundMotorCount = 0; @@ -952,6 +955,7 @@ MK::mk_servo_test(unsigned int chan) if (_motor >= _num_outputs) { _motor = -1; _motortest = false; + fprintf(stderr, "[mkblctrl] Motortest finished...\n"); } } @@ -1367,7 +1371,7 @@ mk_new_mode(PortMode new_mode, int update_rate, int motorcount, bool motortest, /* count used motors */ do { - if (g_mk->mk_check_for_blctrl(8, false) != 0) { + if (g_mk->mk_check_for_blctrl(8, false, false) != 0) { shouldStop = 4; } else { @@ -1377,7 +1381,7 @@ mk_new_mode(PortMode new_mode, int update_rate, int motorcount, bool motortest, sleep(1); } while (shouldStop < 3); - g_mk->set_motor_count(g_mk->mk_check_for_blctrl(8, true)); + g_mk->set_motor_count(g_mk->mk_check_for_blctrl(8, true, false)); /* (re)set the PWM output mode */ g_mk->set_mode(servo_mode); @@ -1390,13 +1394,13 @@ mk_new_mode(PortMode new_mode, int update_rate, int motorcount, bool motortest, } int -mk_start(unsigned bus, unsigned motors) +mk_start(unsigned bus, unsigned motors, char *device_path) { int ret = OK; if (g_mk == nullptr) { - g_mk = new MK(bus); + g_mk = new MK(bus, device_path); if (g_mk == nullptr) { ret = -ENOMEM; @@ -1415,6 +1419,52 @@ mk_start(unsigned bus, unsigned motors) } +int +mk_check_for_i2c_esc_bus(char *device_path, int motors) +{ + int ret; + + if (g_mk == nullptr) { + + g_mk = new MK(3, device_path); + + if (g_mk == nullptr) { + return -1; + + } else { + ret = g_mk->mk_check_for_blctrl(8, false, true); + delete g_mk; + g_mk = nullptr; + + if (ret > 0) { + return 3; + } + + } + + + g_mk = new MK(1, device_path); + + if (g_mk == nullptr) { + return -1; + + } else { + ret = g_mk->mk_check_for_blctrl(8, false, true); + delete g_mk; + g_mk = nullptr; + + if (ret > 0) { + return 1; + } + + } + } + + return -1; +} + + + } // namespace extern "C" __EXPORT int mkblctrl_main(int argc, char *argv[]); @@ -1425,13 +1475,14 @@ mkblctrl_main(int argc, char *argv[]) PortMode port_mode = PORT_FULL_PWM; int pwm_update_rate_in_hz = UPDATE_RATE; int motorcount = 8; - int bus = 1; + int bus = -1; int px4mode = MAPPING_PX4; int frametype = FRAME_PLUS; // + plus is default bool motortest = false; bool overrideSecurityChecks = false; bool showHelp = false; bool newMode = false; + char *devicepath = ""; /* * optional parameters @@ -1491,36 +1542,69 @@ mkblctrl_main(int argc, char *argv[]) newMode = true; } + /* look for the optional device parameter */ + if (strcmp(argv[i], "-d") == 0 || strcmp(argv[i], "--device") == 0) { + if (argc > i + 1) { + devicepath = argv[i + 1]; + newMode = true; + + } else { + errx(1, "missing the devicename (-d)"); + return 1; + } + } + } if (showHelp) { fprintf(stderr, "mkblctrl: help:\n"); - fprintf(stderr, " [-mkmode frame{+/x}] [-b i2c_bus_number] [-t motortest] [--override-security-checks] [-h / --help]\n\n"); - fprintf(stderr, "\t -mkmode frame {+/x} \t\t Type of frame, if Mikrokopter motor order is used.\n"); - fprintf(stderr, "\t -b i2c_bus_number \t\t Set the i2c bus where the ESCs are connected to (default 1).\n"); - fprintf(stderr, "\t -t motortest \t\t\t Spin up once every motor in order of motoraddress. (DANGER !!!)\n"); + fprintf(stderr, " [-mkmode {+/x}] [-b i2c_bus_number] [-d devicename] [--override-security-checks] [-h / --help]\n\n"); + fprintf(stderr, "\t -mkmode {+/x} \t\t Type of frame, if Mikrokopter motor order is used.\n"); + fprintf(stderr, "\t -b {i2c_bus_number} \t\t Set the i2c bus where the ESCs are connected to (default autoscan).\n"); + fprintf(stderr, "\t -d {devicepath & name}\t\t Create alternate pwm device.\n"); fprintf(stderr, "\t --override-security-checks \t\t Disable all security checks (arming and number of ESCs). Used to test single Motors etc. (DANGER !!!)\n"); + fprintf(stderr, "\n"); + fprintf(stderr, "Motortest:\n"); + fprintf(stderr, "First you have to start mkblctrl, the you can enter Motortest Mode with:\n"); + fprintf(stderr, "mkblctrl -t\n"); + fprintf(stderr, "This will spin up once every motor in order of motoraddress. (DANGER !!!)\n"); exit(1); } - if (g_mk == nullptr) { - if (mk_start(bus, motorcount) != OK) { - errx(1, "failed to start the MK-BLCtrl driver"); - - } else { - newMode = true; - } - } - - - /* parameter set ? */ - if (newMode) { - /* switch parameter */ - return mk_new_mode(port_mode, pwm_update_rate_in_hz, motorcount, motortest, px4mode, frametype, overrideSecurityChecks); - } - - /* test, etc. here g*/ - - exit(1); + if (!motortest) { + if (g_mk == nullptr) { + if (bus == -1) { + bus = mk_check_for_i2c_esc_bus(devicepath, motorcount); + } + + if (bus != -1) { + if (mk_start(bus, motorcount, devicepath) != OK) { + errx(1, "failed to start the MK-BLCtrl driver"); + } + } else { + errx(1, "failed to start the MK-BLCtrl driver (cannot find i2c esc's)"); + } + + /* parameter set ? */ + if (newMode) { + /* switch parameter */ + return mk_new_mode(port_mode, pwm_update_rate_in_hz, motorcount, motortest, px4mode, frametype, overrideSecurityChecks); + } + + exit(0); + } else { + errx(1, "MK-BLCtrl driver already running"); + } + + } else { + if (g_mk == nullptr) { + errx(1, "MK-BLCtrl driver not running. You have to start it first."); + + } else { + g_mk->set_motor_test(motortest); + exit(0); + + } + } } diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index 70359110e..bbc595af4 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -75,6 +75,9 @@ #define DIR_READ 0x80 #define DIR_WRITE 0x00 +#define MPU_DEVICE_PATH_ACCEL "/dev/mpu6000_accel" +#define MPU_DEVICE_PATH_GYRO "/dev/mpu6000_gyro" + // MPU 6000 registers #define MPUREG_WHOAMI 0x75 #define MPUREG_SMPLRT_DIV 0x19 @@ -161,6 +164,14 @@ #define MPU6000_ONE_G 9.80665f +/* + the MPU6000 can only handle high SPI bus speeds on the sensor and + interrupt status registers. All other registers have a maximum 1MHz + SPI speed + */ +#define MPU6000_LOW_BUS_SPEED 1000*1000 +#define MPU6000_HIGH_BUS_SPEED 11*1000*1000 /* will be rounded to 10.4 MHz, within margins for MPU6K */ + class MPU6000_gyro; class MPU6000 : public device::SPI @@ -200,17 +211,19 @@ private: float _accel_range_scale; float _accel_range_m_s2; orb_advert_t _accel_topic; + int _accel_class_instance; RingBuffer *_gyro_reports; struct gyro_scale _gyro_scale; float _gyro_range_scale; float _gyro_range_rad_s; - orb_advert_t _gyro_topic; - unsigned _reads; unsigned _sample_rate; + perf_counter_t _accel_reads; + perf_counter_t _gyro_reads; perf_counter_t _sample_perf; + perf_counter_t _bad_transfers; math::LowPassFilter2p _accel_filter_x; math::LowPassFilter2p _accel_filter_y; @@ -338,12 +351,17 @@ public: virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); virtual int ioctl(struct file *filp, int cmd, unsigned long arg); + virtual int init(); + protected: friend class MPU6000; void parent_poll_notify(); + private: MPU6000 *_parent; + orb_advert_t _gyro_topic; + int _gyro_class_instance; }; @@ -351,7 +369,7 @@ private: extern "C" { __EXPORT int mpu6000_main(int argc, char *argv[]); } MPU6000::MPU6000(int bus, spi_dev_e device) : - SPI("MPU6000", ACCEL_DEVICE_PATH, bus, device, SPIDEV_MODE3, 10000000), + SPI("MPU6000", MPU_DEVICE_PATH_ACCEL, bus, device, SPIDEV_MODE3, MPU6000_LOW_BUS_SPEED), _gyro(new MPU6000_gyro(this)), _product(0), _call_interval(0), @@ -359,13 +377,15 @@ MPU6000::MPU6000(int bus, spi_dev_e device) : _accel_range_scale(0.0f), _accel_range_m_s2(0.0f), _accel_topic(-1), + _accel_class_instance(-1), _gyro_reports(nullptr), _gyro_range_scale(0.0f), _gyro_range_rad_s(0.0f), - _gyro_topic(-1), - _reads(0), _sample_rate(1000), + _accel_reads(perf_alloc(PC_COUNT, "mpu6000_accel_read")), + _gyro_reads(perf_alloc(PC_COUNT, "mpu6000_gyro_read")), _sample_perf(perf_alloc(PC_ELAPSED, "mpu6000_read")), + _bad_transfers(perf_alloc(PC_COUNT, "mpu6000_bad_transfers")), _accel_filter_x(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_y(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_z(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), @@ -409,8 +429,14 @@ MPU6000::~MPU6000() if (_gyro_reports != nullptr) delete _gyro_reports; + if (_accel_class_instance != -1) + unregister_class_devname(ACCEL_DEVICE_PATH, _accel_class_instance); + /* delete the perf counter */ perf_free(_sample_perf); + perf_free(_accel_reads); + perf_free(_gyro_reads); + perf_free(_bad_transfers); } int @@ -455,24 +481,23 @@ MPU6000::init() _gyro_scale.z_scale = 1.0f; /* do CDev init for the gyro device node, keep it optional */ - gyro_ret = _gyro->init(); + ret = _gyro->init(); + /* if probe/setup failed, bail now */ + if (ret != OK) { + debug("gyro init failed"); + return ret; + } /* fetch an initial set of measurements for advertisement */ measure(); - if (gyro_ret != OK) { - _gyro_topic = -1; - } else { - gyro_report gr; - _gyro_reports->get(&gr); - - _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &gr); - } - - /* advertise accel topic */ - accel_report ar; - _accel_reports->get(&ar); - _accel_topic = orb_advertise(ORB_ID(sensor_accel), &ar); + _accel_class_instance = register_class_devname(ACCEL_DEVICE_PATH); + if (_accel_class_instance == CLASS_DEVICE_PRIMARY) { + /* advertise accel topic */ + accel_report ar; + _accel_reports->get(&ar); + _accel_topic = orb_advertise(ORB_ID(sensor_accel), &ar); + } out: return ret; @@ -480,17 +505,26 @@ out: void MPU6000::reset() { + // if the mpu6000 is initialised after the l3gd20 and lsm303d + // then if we don't do an irqsave/irqrestore here the mpu6000 + // frequenctly comes up in a bad state where all transfers + // come as zero + irqstate_t state; + state = irqsave(); - // Chip reset write_reg(MPUREG_PWR_MGMT_1, BIT_H_RESET); up_udelay(10000); - // Wake up device and select GyroZ clock (better performance) + // Wake up device and select GyroZ clock. Note that the + // MPU6000 starts up in sleep mode, and it can take some time + // for it to come out of sleep write_reg(MPUREG_PWR_MGMT_1, MPU_CLK_SEL_PLLGYROZ); up_udelay(1000); // Disable I2C bus (recommended on datasheet) write_reg(MPUREG_USER_CTRL, BIT_I2C_IF_DIS); + irqrestore(state); + up_udelay(1000); // SAMPLE RATE @@ -652,6 +686,8 @@ MPU6000::read(struct file *filp, char *buffer, size_t buflen) if (_accel_reports->empty()) return -EAGAIN; + perf_count(_accel_reads); + /* copy reports out of our buffer to the caller */ accel_report *arp = reinterpret_cast<accel_report *>(buffer); int transferred = 0; @@ -669,12 +705,12 @@ MPU6000::read(struct file *filp, char *buffer, size_t buflen) int MPU6000::self_test() { - if (_reads == 0) { + if (perf_event_count(_sample_perf) == 0) { measure(); } /* return 0 on success, 1 else */ - return (_reads > 0) ? 0 : 1; + return (perf_event_count(_sample_perf) > 0) ? 0 : 1; } int @@ -746,6 +782,8 @@ MPU6000::gyro_read(struct file *filp, char *buffer, size_t buflen) if (_gyro_reports->empty()) return -EAGAIN; + perf_count(_gyro_reads); + /* copy reports out of our buffer to the caller */ gyro_report *grp = reinterpret_cast<gyro_report *>(buffer); int transferred = 0; @@ -987,9 +1025,10 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg) uint8_t MPU6000::read_reg(unsigned reg) { - uint8_t cmd[2]; + uint8_t cmd[2] = { (uint8_t)(reg | DIR_READ), 0}; - cmd[0] = reg | DIR_READ; + // general register transfer at low clock speed + set_frequency(MPU6000_LOW_BUS_SPEED); transfer(cmd, cmd, sizeof(cmd)); @@ -999,9 +1038,10 @@ MPU6000::read_reg(unsigned reg) uint16_t MPU6000::read_reg16(unsigned reg) { - uint8_t cmd[3]; + uint8_t cmd[3] = { (uint8_t)(reg | DIR_READ), 0, 0 }; - cmd[0] = reg | DIR_READ; + // general register transfer at low clock speed + set_frequency(MPU6000_LOW_BUS_SPEED); transfer(cmd, cmd, sizeof(cmd)); @@ -1016,6 +1056,9 @@ MPU6000::write_reg(unsigned reg, uint8_t value) cmd[0] = reg | DIR_WRITE; cmd[1] = value; + // general register transfer at low clock speed + set_frequency(MPU6000_LOW_BUS_SPEED); + transfer(cmd, nullptr, sizeof(cmd)); } @@ -1139,12 +1182,13 @@ MPU6000::measure() * Fetch the full set of measurements from the MPU6000 in one pass. */ mpu_report.cmd = DIR_READ | MPUREG_INT_STATUS; + + // sensor transfer at high clock speed + set_frequency(MPU6000_HIGH_BUS_SPEED); + if (OK != transfer((uint8_t *)&mpu_report, ((uint8_t *)&mpu_report), sizeof(mpu_report))) return; - /* count measurement */ - _reads++; - /* * Convert from big to little endian */ @@ -1159,6 +1203,20 @@ MPU6000::measure() report.gyro_y = int16_t_from_bytes(mpu_report.gyro_y); report.gyro_z = int16_t_from_bytes(mpu_report.gyro_z); + if (report.accel_x == 0 && + report.accel_y == 0 && + report.accel_z == 0 && + report.temp == 0 && + report.gyro_x == 0 && + report.gyro_y == 0 && + report.gyro_z == 0) { + // all zero data - probably a SPI bus error + perf_count(_bad_transfers); + perf_end(_sample_perf); + return; + } + + /* * Swap axes and negate y */ @@ -1249,10 +1307,11 @@ MPU6000::measure() poll_notify(POLLIN); _gyro->parent_poll_notify(); - /* and publish for subscribers */ - orb_publish(ORB_ID(sensor_accel), _accel_topic, &arb); - if (_gyro_topic != -1) { - orb_publish(ORB_ID(sensor_gyro), _gyro_topic, &grb); + if (_accel_topic != -1) { + orb_publish(ORB_ID(sensor_accel), _accel_topic, &arb); + } + if (_gyro->_gyro_topic != -1) { + orb_publish(ORB_ID(sensor_gyro), _gyro->_gyro_topic, &grb); } /* stop measuring */ @@ -1263,19 +1322,48 @@ void MPU6000::print_info() { perf_print_counter(_sample_perf); - printf("reads: %u\n", _reads); + perf_print_counter(_accel_reads); + perf_print_counter(_gyro_reads); _accel_reports->print_info("accel queue"); _gyro_reports->print_info("gyro queue"); } MPU6000_gyro::MPU6000_gyro(MPU6000 *parent) : - CDev("MPU6000_gyro", GYRO_DEVICE_PATH), - _parent(parent) + CDev("MPU6000_gyro", MPU_DEVICE_PATH_GYRO), + _parent(parent), + _gyro_class_instance(-1) { } MPU6000_gyro::~MPU6000_gyro() { + if (_gyro_class_instance != -1) + unregister_class_devname(GYRO_DEVICE_PATH, _gyro_class_instance); +} + +int +MPU6000_gyro::init() +{ + int ret; + + // do base class init + ret = CDev::init(); + + /* if probe/setup failed, bail now */ + if (ret != OK) { + debug("gyro init failed"); + return ret; + } + + _gyro_class_instance = register_class_devname(GYRO_DEVICE_PATH); + if (_gyro_class_instance == CLASS_DEVICE_PRIMARY) { + gyro_report gr; + memset(&gr, 0, sizeof(gr)); + _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &gr); + } + +out: + return ret; } void @@ -1331,7 +1419,7 @@ start() goto fail; /* set the poll rate to default, starts automatic data collection */ - fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + fd = open(MPU_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) goto fail; @@ -1339,6 +1427,8 @@ start() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) goto fail; + close(fd); + exit(0); fail: @@ -1363,17 +1453,17 @@ test() ssize_t sz; /* get the driver */ - int fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + int fd = open(MPU_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) err(1, "%s open failed (try 'mpu6000 start' if the driver is not running)", - ACCEL_DEVICE_PATH); + MPU_DEVICE_PATH_ACCEL); /* get the driver */ - int fd_gyro = open(GYRO_DEVICE_PATH, O_RDONLY); + int fd_gyro = open(MPU_DEVICE_PATH_GYRO, O_RDONLY); if (fd_gyro < 0) - err(1, "%s open failed", GYRO_DEVICE_PATH); + err(1, "%s open failed", MPU_DEVICE_PATH_GYRO); /* reset to manual polling */ if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MANUAL) < 0) @@ -1431,7 +1521,7 @@ test() void reset() { - int fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + int fd = open(MPU_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) err(1, "failed "); @@ -1442,6 +1532,8 @@ reset() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) err(1, "driver poll restart failed"); + close(fd); + exit(0); } diff --git a/src/drivers/ms5611/ms5611.cpp b/src/drivers/ms5611/ms5611.cpp index 938786d3f..87788824a 100644 --- a/src/drivers/ms5611/ms5611.cpp +++ b/src/drivers/ms5611/ms5611.cpp @@ -420,8 +420,11 @@ MS5611::ioctl(struct file *filp, int cmd, unsigned long arg) return _reports->size(); case SENSORIOCRESET: - /* XXX implement this */ - return -EINVAL; + /* + * Since we are initialized, we do not need to do anything, since the + * PROM is correctly read and the part does not need to be configured. + */ + return OK; case BAROIOCSMSLPRESSURE: diff --git a/src/drivers/ms5611/ms5611_spi.cpp b/src/drivers/ms5611/ms5611_spi.cpp index e547c913b..26216e840 100644 --- a/src/drivers/ms5611/ms5611_spi.cpp +++ b/src/drivers/ms5611/ms5611_spi.cpp @@ -121,7 +121,7 @@ MS5611_spi_interface(ms5611::prom_u &prom_buf) } MS5611_SPI::MS5611_SPI(int bus, spi_dev_e device, ms5611::prom_u &prom_buf) : - SPI("MS5611_SPI", nullptr, bus, device, SPIDEV_MODE3, 2000000), + SPI("MS5611_SPI", nullptr, bus, device, SPIDEV_MODE3, 11*1000*1000 /* will be rounded to 10.4 MHz */), _prom(prom_buf) { } @@ -134,7 +134,6 @@ int MS5611_SPI::init() { int ret; - irqstate_t flags; ret = SPI::init(); if (ret != OK) { @@ -167,10 +166,9 @@ MS5611_SPI::read(unsigned offset, void *data, unsigned count) uint8_t b[4]; uint32_t w; } *cvt = (_cvt *)data; - uint8_t buf[4]; + uint8_t buf[4] = { 0 | DIR_WRITE, 0, 0, 0 }; /* read the most recent measurement */ - buf[0] = 0 | DIR_WRITE; int ret = _transfer(&buf[0], &buf[0], sizeof(buf)); if (ret == OK) { @@ -238,21 +236,31 @@ MS5611_SPI::_read_prom() usleep(3000); /* read and convert PROM words */ + bool all_zero = true; for (int i = 0; i < 8; i++) { uint8_t cmd = (ADDR_PROM_SETUP + (i * 2)); _prom.c[i] = _reg16(cmd); + if (_prom.c[i] != 0) + all_zero = false; + //debug("prom[%u]=0x%x", (unsigned)i, (unsigned)_prom.c[i]); } /* calculate CRC and return success/failure accordingly */ - return ms5611::crc4(&_prom.c[0]) ? OK : -EIO; + int ret = ms5611::crc4(&_prom.c[0]) ? OK : -EIO; + if (ret != OK) { + debug("crc failed"); + } + if (all_zero) { + debug("prom all zero"); + ret = -EIO; + } + return ret; } uint16_t MS5611_SPI::_reg16(unsigned reg) { - uint8_t cmd[3]; - - cmd[0] = reg | DIR_READ; + uint8_t cmd[3] = { (uint8_t)(reg | DIR_READ), 0, 0 }; _transfer(cmd, cmd, sizeof(cmd)); diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index 38cfce2e9..eea235943 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -69,7 +69,6 @@ #include <drivers/drv_rc_input.h> #include <uORB/topics/actuator_controls.h> -#include <uORB/topics/actuator_controls_effective.h> #include <uORB/topics/actuator_outputs.h> #include <uORB/topics/actuator_armed.h> @@ -123,7 +122,6 @@ private: int _t_actuators; int _t_actuator_armed; orb_advert_t _t_outputs; - orb_advert_t _t_actuators_effective; unsigned _num_outputs; bool _primary_pwm_device; @@ -164,6 +162,7 @@ private: static const unsigned _ngpio; void gpio_reset(void); + void sensor_reset(int ms); void gpio_set_function(uint32_t gpios, int function); void gpio_write(uint32_t gpios, int function); uint32_t gpio_read(void); @@ -219,17 +218,16 @@ PX4FMU::PX4FMU() : _t_actuators(-1), _t_actuator_armed(-1), _t_outputs(0), - _t_actuators_effective(0), _num_outputs(0), _primary_pwm_device(false), _task_should_exit(false), _armed(false), _pwm_on(false), _mixers(nullptr), - _failsafe_pwm({0}), - _disarmed_pwm({0}), - _num_failsafe_set(0), - _num_disarmed_set(0) + _failsafe_pwm( {0}), + _disarmed_pwm( {0}), + _num_failsafe_set(0), + _num_disarmed_set(0) { for (unsigned i = 0; i < _max_actuators; i++) { _min_pwm[i] = PWM_DEFAULT_MIN; @@ -293,11 +291,11 @@ PX4FMU::init() /* start the IO interface task */ _task = task_spawn_cmd("fmuservo", - SCHED_DEFAULT, - SCHED_PRIORITY_DEFAULT, - 2048, - (main_t)&PX4FMU::task_main_trampoline, - nullptr); + SCHED_DEFAULT, + SCHED_PRIORITY_DEFAULT, + 2048, + (main_t)&PX4FMU::task_main_trampoline, + nullptr); if (_task < 0) { debug("task start failed: %d", errno); @@ -326,7 +324,7 @@ PX4FMU::set_mode(Mode mode) switch (mode) { case MODE_2PWM: // v1 multi-port with flow control lines as PWM debug("MODE_2PWM"); - + /* default output rates */ _pwm_default_rate = 50; _pwm_alt_rate = 50; @@ -340,7 +338,7 @@ PX4FMU::set_mode(Mode mode) case MODE_4PWM: // v1 multi-port as 4 PWM outs debug("MODE_4PWM"); - + /* default output rates */ _pwm_default_rate = 50; _pwm_alt_rate = 50; @@ -354,7 +352,7 @@ PX4FMU::set_mode(Mode mode) case MODE_6PWM: // v2 PWMs as 6 PWM outs debug("MODE_6PWM"); - + /* default output rates */ _pwm_default_rate = 50; _pwm_alt_rate = 50; @@ -396,6 +394,7 @@ PX4FMU::set_pwm_rate(uint32_t rate_map, unsigned default_rate, unsigned alt_rate // get the channel mask for this rate group uint32_t mask = up_pwm_servo_get_rate_group(group); + if (mask == 0) continue; @@ -409,6 +408,7 @@ PX4FMU::set_pwm_rate(uint32_t rate_map, unsigned default_rate, unsigned alt_rate // not a legal map, bail return -EINVAL; } + } else { // set it - errors here are unexpected if (alt != 0) { @@ -416,6 +416,7 @@ PX4FMU::set_pwm_rate(uint32_t rate_map, unsigned default_rate, unsigned alt_rate warn("rate group set alt failed"); return -EINVAL; } + } else { if (up_pwm_servo_set_rate_group_update(group, _pwm_default_rate) != OK) { warn("rate group set default failed"); @@ -425,6 +426,7 @@ PX4FMU::set_pwm_rate(uint32_t rate_map, unsigned default_rate, unsigned alt_rate } } } + _pwm_alt_rate_channels = rate_map; _pwm_default_rate = default_rate; _pwm_alt_rate = alt_rate; @@ -466,13 +468,6 @@ PX4FMU::task_main() _t_outputs = orb_advertise(_primary_pwm_device ? ORB_ID_VEHICLE_CONTROLS : ORB_ID(actuator_outputs_1), &outputs); - /* advertise the effective control inputs */ - actuator_controls_effective_s controls_effective; - memset(&controls_effective, 0, sizeof(controls_effective)); - /* advertise the effective control inputs */ - _t_actuators_effective = orb_advertise(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE : ORB_ID(actuator_controls_effective_1), - &controls_effective); - pollfd fds[2]; fds[0].fd = _t_actuators; fds[0].events = POLLIN; @@ -503,6 +498,7 @@ PX4FMU::task_main() * We always mix at max rate; some channels may update slower. */ unsigned max_rate = (_pwm_default_rate > _pwm_alt_rate) ? _pwm_default_rate : _pwm_alt_rate; + if (_current_update_rate != max_rate) { _current_update_rate = max_rate; int update_rate_in_ms = int(1000 / _current_update_rate); @@ -511,6 +507,7 @@ PX4FMU::task_main() if (update_rate_in_ms < 2) { update_rate_in_ms = 2; } + /* reject slower than 10 Hz updates */ if (update_rate_in_ms > 100) { update_rate_in_ms = 100; @@ -532,6 +529,7 @@ PX4FMU::task_main() log("poll error %d", errno); usleep(1000000); continue; + } else if (ret == 0) { /* timeout: no control data, switch to failsafe values */ // warnx("no PWM: failsafe"); @@ -554,12 +552,15 @@ PX4FMU::task_main() case MODE_2PWM: num_outputs = 2; break; + case MODE_4PWM: num_outputs = 4; break; + case MODE_6PWM: num_outputs = 6; break; + default: num_outputs = 0; break; @@ -573,9 +574,9 @@ PX4FMU::task_main() for (unsigned i = 0; i < num_outputs; i++) { /* last resort: catch NaN, INF and out-of-band errors */ if (i >= outputs.noutputs || - !isfinite(outputs.output[i]) || - outputs.output[i] < -1.0f || - outputs.output[i] > 1.0f) { + !isfinite(outputs.output[i]) || + outputs.output[i] < -1.0f || + outputs.output[i] > 1.0f) { /* * Value is NaN, INF or out of band - set to the minimum value. * This will be clearly visible on the servo status and will limit the risk of accidentally @@ -592,12 +593,6 @@ PX4FMU::task_main() pwm_limit_calc(_armed, num_outputs, _disarmed_pwm, _min_pwm, _max_pwm, outputs.output, pwm_limited, &_pwm_limit); - /* output actual limited values */ - for (unsigned i = 0; i < num_outputs; i++) { - controls_effective.control_effective[i] = (float)pwm_limited[i]; - } - orb_publish(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE : ORB_ID(actuator_controls_effective_1), _t_actuators_effective, &controls_effective); - /* output to the servos */ for (unsigned i = 0; i < num_outputs; i++) { up_pwm_servo_set(i, pwm_limited[i]); @@ -617,11 +612,13 @@ PX4FMU::task_main() /* update the armed status and check that we're not locked down */ bool set_armed = aa.armed && !aa.lockdown; + if (_armed != set_armed) _armed = set_armed; /* update PWM status if armed or if disarmed PWM values are set */ bool pwm_on = (aa.armed || _num_disarmed_set > 0); + if (_pwm_on != pwm_on) { _pwm_on = pwm_on; up_pwm_servo_arm(pwm_on); @@ -630,31 +627,36 @@ PX4FMU::task_main() } #ifdef HRT_PPM_CHANNEL + // see if we have new PPM input data if (ppm_last_valid_decode != rc_in.timestamp) { // we have a new PPM frame. Publish it. rc_in.channel_count = ppm_decoded_channels; + if (rc_in.channel_count > RC_INPUT_MAX_CHANNELS) { rc_in.channel_count = RC_INPUT_MAX_CHANNELS; } - for (uint8_t i=0; i<rc_in.channel_count; i++) { + + for (uint8_t i = 0; i < rc_in.channel_count; i++) { rc_in.values[i] = ppm_buffer[i]; } + rc_in.timestamp = ppm_last_valid_decode; /* lazily advertise on first publication */ if (to_input_rc == 0) { to_input_rc = orb_advertise(ORB_ID(input_rc), &rc_in); - } else { + + } else { orb_publish(ORB_ID(input_rc), to_input_rc, &rc_in); } } + #endif } ::close(_t_actuators); - ::close(_t_actuators_effective); ::close(_t_actuator_armed); /* make sure servos are off */ @@ -757,142 +759,176 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; case PWM_SERVO_SET_FAILSAFE_PWM: { - struct pwm_output_values *pwm = (struct pwm_output_values*)arg; - /* discard if too many values are sent */ - if (pwm->channel_count > _max_actuators) { - ret = -EINVAL; - break; - } - for (unsigned i = 0; i < pwm->channel_count; i++) { - if (pwm->values[i] == 0) { - /* ignore 0 */ - } else if (pwm->values[i] > PWM_HIGHEST_MAX) { - _failsafe_pwm[i] = PWM_HIGHEST_MAX; - } else if (pwm->values[i] < PWM_LOWEST_MIN) { - _failsafe_pwm[i] = PWM_LOWEST_MIN; - } else { - _failsafe_pwm[i] = pwm->values[i]; + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; + + /* discard if too many values are sent */ + if (pwm->channel_count > _max_actuators) { + ret = -EINVAL; + break; } - } - /* - * update the counter - * this is needed to decide if disarmed PWM output should be turned on or not - */ - _num_failsafe_set = 0; - for (unsigned i = 0; i < _max_actuators; i++) { - if (_failsafe_pwm[i] > 0) - _num_failsafe_set++; + for (unsigned i = 0; i < pwm->channel_count; i++) { + if (pwm->values[i] == 0) { + /* ignore 0 */ + } else if (pwm->values[i] > PWM_HIGHEST_MAX) { + _failsafe_pwm[i] = PWM_HIGHEST_MAX; + + } else if (pwm->values[i] < PWM_LOWEST_MIN) { + _failsafe_pwm[i] = PWM_LOWEST_MIN; + + } else { + _failsafe_pwm[i] = pwm->values[i]; + } + } + + /* + * update the counter + * this is needed to decide if disarmed PWM output should be turned on or not + */ + _num_failsafe_set = 0; + + for (unsigned i = 0; i < _max_actuators; i++) { + if (_failsafe_pwm[i] > 0) + _num_failsafe_set++; + } + + break; } - break; - } + case PWM_SERVO_GET_FAILSAFE_PWM: { - struct pwm_output_values *pwm = (struct pwm_output_values*)arg; - for (unsigned i = 0; i < _max_actuators; i++) { - pwm->values[i] = _failsafe_pwm[i]; - } - pwm->channel_count = _max_actuators; - break; - } + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; - case PWM_SERVO_SET_DISARMED_PWM: { - struct pwm_output_values *pwm = (struct pwm_output_values*)arg; - /* discard if too many values are sent */ - if (pwm->channel_count > _max_actuators) { - ret = -EINVAL; + for (unsigned i = 0; i < _max_actuators; i++) { + pwm->values[i] = _failsafe_pwm[i]; + } + + pwm->channel_count = _max_actuators; break; } - for (unsigned i = 0; i < pwm->channel_count; i++) { - if (pwm->values[i] == 0) { - /* ignore 0 */ - } else if (pwm->values[i] > PWM_HIGHEST_MAX) { - _disarmed_pwm[i] = PWM_HIGHEST_MAX; - } else if (pwm->values[i] < PWM_LOWEST_MIN) { - _disarmed_pwm[i] = PWM_LOWEST_MIN; - } else { - _disarmed_pwm[i] = pwm->values[i]; + + case PWM_SERVO_SET_DISARMED_PWM: { + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; + + /* discard if too many values are sent */ + if (pwm->channel_count > _max_actuators) { + ret = -EINVAL; + break; } - } - /* - * update the counter - * this is needed to decide if disarmed PWM output should be turned on or not - */ - _num_disarmed_set = 0; - for (unsigned i = 0; i < _max_actuators; i++) { - if (_disarmed_pwm[i] > 0) - _num_disarmed_set++; + for (unsigned i = 0; i < pwm->channel_count; i++) { + if (pwm->values[i] == 0) { + /* ignore 0 */ + } else if (pwm->values[i] > PWM_HIGHEST_MAX) { + _disarmed_pwm[i] = PWM_HIGHEST_MAX; + + } else if (pwm->values[i] < PWM_LOWEST_MIN) { + _disarmed_pwm[i] = PWM_LOWEST_MIN; + + } else { + _disarmed_pwm[i] = pwm->values[i]; + } + } + + /* + * update the counter + * this is needed to decide if disarmed PWM output should be turned on or not + */ + _num_disarmed_set = 0; + + for (unsigned i = 0; i < _max_actuators; i++) { + if (_disarmed_pwm[i] > 0) + _num_disarmed_set++; + } + + break; } - break; - } + case PWM_SERVO_GET_DISARMED_PWM: { - struct pwm_output_values *pwm = (struct pwm_output_values*)arg; - for (unsigned i = 0; i < _max_actuators; i++) { - pwm->values[i] = _disarmed_pwm[i]; - } - pwm->channel_count = _max_actuators; - break; - } + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; - case PWM_SERVO_SET_MIN_PWM: { - struct pwm_output_values* pwm = (struct pwm_output_values*)arg; - /* discard if too many values are sent */ - if (pwm->channel_count > _max_actuators) { - ret = -EINVAL; + for (unsigned i = 0; i < _max_actuators; i++) { + pwm->values[i] = _disarmed_pwm[i]; + } + + pwm->channel_count = _max_actuators; break; } - for (unsigned i = 0; i < pwm->channel_count; i++) { - if (pwm->values[i] == 0) { - /* ignore 0 */ - } else if (pwm->values[i] > PWM_HIGHEST_MIN) { - _min_pwm[i] = PWM_HIGHEST_MIN; - } else if (pwm->values[i] < PWM_LOWEST_MIN) { - _min_pwm[i] = PWM_LOWEST_MIN; - } else { - _min_pwm[i] = pwm->values[i]; + + case PWM_SERVO_SET_MIN_PWM: { + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; + + /* discard if too many values are sent */ + if (pwm->channel_count > _max_actuators) { + ret = -EINVAL; + break; } + + for (unsigned i = 0; i < pwm->channel_count; i++) { + if (pwm->values[i] == 0) { + /* ignore 0 */ + } else if (pwm->values[i] > PWM_HIGHEST_MIN) { + _min_pwm[i] = PWM_HIGHEST_MIN; + + } else if (pwm->values[i] < PWM_LOWEST_MIN) { + _min_pwm[i] = PWM_LOWEST_MIN; + + } else { + _min_pwm[i] = pwm->values[i]; + } + } + + break; } - break; - } + case PWM_SERVO_GET_MIN_PWM: { - struct pwm_output_values *pwm = (struct pwm_output_values*)arg; - for (unsigned i = 0; i < _max_actuators; i++) { - pwm->values[i] = _min_pwm[i]; - } - pwm->channel_count = _max_actuators; - arg = (unsigned long)&pwm; - break; - } + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; - case PWM_SERVO_SET_MAX_PWM: { - struct pwm_output_values* pwm = (struct pwm_output_values*)arg; - /* discard if too many values are sent */ - if (pwm->channel_count > _max_actuators) { - ret = -EINVAL; + for (unsigned i = 0; i < _max_actuators; i++) { + pwm->values[i] = _min_pwm[i]; + } + + pwm->channel_count = _max_actuators; + arg = (unsigned long)&pwm; break; } - for (unsigned i = 0; i < pwm->channel_count; i++) { - if (pwm->values[i] == 0) { - /* ignore 0 */ - } else if (pwm->values[i] < PWM_LOWEST_MAX) { - _max_pwm[i] = PWM_LOWEST_MAX; - } else if (pwm->values[i] > PWM_HIGHEST_MAX) { - _max_pwm[i] = PWM_HIGHEST_MAX; - } else { - _max_pwm[i] = pwm->values[i]; + + case PWM_SERVO_SET_MAX_PWM: { + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; + + /* discard if too many values are sent */ + if (pwm->channel_count > _max_actuators) { + ret = -EINVAL; + break; + } + + for (unsigned i = 0; i < pwm->channel_count; i++) { + if (pwm->values[i] == 0) { + /* ignore 0 */ + } else if (pwm->values[i] < PWM_LOWEST_MAX) { + _max_pwm[i] = PWM_LOWEST_MAX; + + } else if (pwm->values[i] > PWM_HIGHEST_MAX) { + _max_pwm[i] = PWM_HIGHEST_MAX; + + } else { + _max_pwm[i] = pwm->values[i]; + } } + + break; } - break; - } + case PWM_SERVO_GET_MAX_PWM: { - struct pwm_output_values *pwm = (struct pwm_output_values*)arg; - for (unsigned i = 0; i < _max_actuators; i++) { - pwm->values[i] = _max_pwm[i]; + struct pwm_output_values *pwm = (struct pwm_output_values *)arg; + + for (unsigned i = 0; i < _max_actuators; i++) { + pwm->values[i] = _max_pwm[i]; + } + + pwm->channel_count = _max_actuators; + arg = (unsigned long)&pwm; + break; } - pwm->channel_count = _max_actuators; - arg = (unsigned long)&pwm; - break; - } case PWM_SERVO_SET(5): case PWM_SERVO_SET(4): @@ -914,6 +950,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) case PWM_SERVO_SET(0): if (arg <= 2100) { up_pwm_servo_set(cmd - PWM_SERVO_SET(0), arg); + } else { ret = -EINVAL; } @@ -950,18 +987,21 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) *(uint32_t *)arg = up_pwm_servo_get_rate_group(cmd - PWM_SERVO_GET_RATEGROUP(0)); break; - case PWM_SERVO_GET_COUNT: + case PWM_SERVO_GET_COUNT: case MIXERIOCGETOUTPUTCOUNT: switch (_mode) { case MODE_6PWM: *(unsigned *)arg = 6; break; + case MODE_4PWM: *(unsigned *)arg = 4; break; + case MODE_2PWM: *(unsigned *)arg = 2; break; + default: ret = -EINVAL; break; @@ -1019,6 +1059,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) ret = -EINVAL; } } + break; } @@ -1053,10 +1094,81 @@ PX4FMU::write(file *filp, const char *buffer, size_t len) for (uint8_t i = 0; i < count; i++) { up_pwm_servo_set(i, values[i]); } + return count * 2; } void +PX4FMU::sensor_reset(int ms) +{ +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) + + if (ms < 1) { + ms = 1; + } + + /* disable SPI bus */ + stm32_configgpio(GPIO_SPI_CS_GYRO_OFF); + stm32_configgpio(GPIO_SPI_CS_ACCEL_MAG_OFF); + stm32_configgpio(GPIO_SPI_CS_BARO_OFF); + + stm32_gpiowrite(GPIO_SPI_CS_GYRO_OFF, 0); + stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG_OFF, 0); + stm32_gpiowrite(GPIO_SPI_CS_BARO_OFF, 0); + + stm32_configgpio(GPIO_SPI1_SCK_OFF); + stm32_configgpio(GPIO_SPI1_MISO_OFF); + stm32_configgpio(GPIO_SPI1_MOSI_OFF); + + stm32_gpiowrite(GPIO_SPI1_SCK_OFF, 0); + stm32_gpiowrite(GPIO_SPI1_MISO_OFF, 0); + stm32_gpiowrite(GPIO_SPI1_MOSI_OFF, 0); + + stm32_configgpio(GPIO_GYRO_DRDY_OFF); + stm32_configgpio(GPIO_MAG_DRDY_OFF); + stm32_configgpio(GPIO_ACCEL_DRDY_OFF); + + stm32_gpiowrite(GPIO_GYRO_DRDY_OFF, 0); + stm32_gpiowrite(GPIO_MAG_DRDY_OFF, 0); + stm32_gpiowrite(GPIO_ACCEL_DRDY_OFF, 0); + + /* set the sensor rail off */ + stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN); + stm32_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, 0); + + /* wait for the sensor rail to reach GND */ + usleep(ms * 1000); + warnx("reset done, %d ms", ms); + + /* re-enable power */ + + /* switch the sensor rail back on */ + stm32_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, 1); + + /* wait a bit before starting SPI, different times didn't influence results */ + usleep(100); + + /* reconfigure the SPI pins */ +#ifdef CONFIG_STM32_SPI1 + stm32_configgpio(GPIO_SPI_CS_GYRO); + stm32_configgpio(GPIO_SPI_CS_ACCEL_MAG); + stm32_configgpio(GPIO_SPI_CS_BARO); + stm32_configgpio(GPIO_SPI_CS_MPU); + + /* De-activate all peripherals, + * required for some peripheral + * state machines + */ + stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); + stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1); + stm32_gpiowrite(GPIO_SPI_CS_BARO, 1); + stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); +#endif +#endif +} + + +void PX4FMU::gpio_reset(void) { /* @@ -1066,6 +1178,7 @@ PX4FMU::gpio_reset(void) for (unsigned i = 0; i < _ngpio; i++) { if (_gpio_tab[i].input != 0) { stm32_configgpio(_gpio_tab[i].input); + } else if (_gpio_tab[i].output != 0) { stm32_configgpio(_gpio_tab[i].output); } @@ -1082,6 +1195,7 @@ void PX4FMU::gpio_set_function(uint32_t gpios, int function) { #if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + /* * GPIOs 0 and 1 must have the same direction as they are buffered * by a shared 2-port driver. Any attempt to set either sets both. @@ -1093,6 +1207,7 @@ PX4FMU::gpio_set_function(uint32_t gpios, int function) if (GPIO_SET_OUTPUT == function) stm32_gpiowrite(GPIO_GPIO_DIR, 1); } + #endif /* configure selected GPIOs as required */ @@ -1117,9 +1232,11 @@ PX4FMU::gpio_set_function(uint32_t gpios, int function) } #if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + /* flip buffer to input mode if required */ if ((GPIO_SET_INPUT == function) && (gpios & 3)) stm32_gpiowrite(GPIO_GPIO_DIR, 0); + #endif } @@ -1158,6 +1275,10 @@ PX4FMU::gpio_ioctl(struct file *filp, int cmd, unsigned long arg) gpio_reset(); break; + case GPIO_SENSOR_RAIL_RESET: + sensor_reset(arg); + break; + case GPIO_SET_OUTPUT: case GPIO_SET_INPUT: case GPIO_SET_ALT_1: @@ -1231,8 +1352,9 @@ fmu_new_mode(PortMode new_mode) #endif break; - /* mixed modes supported on v1 board only */ + /* mixed modes supported on v1 board only */ #if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + case PORT_FULL_SERIAL: /* set all multi-GPIOs to serial mode */ gpio_bits = GPIO_MULTI_1 | GPIO_MULTI_2 | GPIO_MULTI_3 | GPIO_MULTI_4; @@ -1255,6 +1377,7 @@ fmu_new_mode(PortMode new_mode) servo_mode = PX4FMU::MODE_2PWM; break; #endif + default: return -1; } @@ -1309,14 +1432,30 @@ fmu_stop(void) } void +sensor_reset(int ms) +{ + int fd; + int ret; + + fd = open(PX4FMU_DEVICE_PATH, O_RDWR); + + if (fd < 0) + errx(1, "open fail"); + + if (ioctl(fd, GPIO_SENSOR_RAIL_RESET, ms) < 0) + err(1, "servo arm failed"); + +} + +void test(void) { int fd; - unsigned servo_count = 0; + unsigned servo_count = 0; unsigned pwm_value = 1000; int direction = 1; int ret; - + fd = open(PX4FMU_DEVICE_PATH, O_RDWR); if (fd < 0) @@ -1324,9 +1463,9 @@ test(void) if (ioctl(fd, PWM_SERVO_ARM, 0) < 0) err(1, "servo arm failed"); - if (ioctl(fd, PWM_SERVO_GET_COUNT, (unsigned long)&servo_count) != 0) { - err(1, "Unable to get servo count\n"); - } + if (ioctl(fd, PWM_SERVO_GET_COUNT, (unsigned long)&servo_count) != 0) { + err(1, "Unable to get servo count\n"); + } warnx("Testing %u servos", (unsigned)servo_count); @@ -1339,32 +1478,38 @@ test(void) for (;;) { /* sweep all servos between 1000..2000 */ servo_position_t servos[servo_count]; + for (unsigned i = 0; i < servo_count; i++) servos[i] = pwm_value; - if (direction == 1) { - // use ioctl interface for one direction - for (unsigned i=0; i < servo_count; i++) { - if (ioctl(fd, PWM_SERVO_SET(i), servos[i]) < 0) { - err(1, "servo %u set failed", i); - } - } - } else { - // and use write interface for the other direction - ret = write(fd, servos, sizeof(servos)); - if (ret != (int)sizeof(servos)) - err(1, "error writing PWM servo data, wrote %u got %d", sizeof(servos), ret); - } + if (direction == 1) { + // use ioctl interface for one direction + for (unsigned i = 0; i < servo_count; i++) { + if (ioctl(fd, PWM_SERVO_SET(i), servos[i]) < 0) { + err(1, "servo %u set failed", i); + } + } + + } else { + // and use write interface for the other direction + ret = write(fd, servos, sizeof(servos)); + + if (ret != (int)sizeof(servos)) + err(1, "error writing PWM servo data, wrote %u got %d", sizeof(servos), ret); + } if (direction > 0) { if (pwm_value < 2000) { pwm_value++; + } else { direction = -1; } + } else { if (pwm_value > 1000) { pwm_value--; + } else { direction = 1; } @@ -1376,6 +1521,7 @@ test(void) if (ioctl(fd, PWM_SERVO_GET(i), (unsigned long)&value)) err(1, "error reading PWM servo %d", i); + if (value != servos[i]) errx(1, "servo %d readback error, got %u expected %u", i, value, servos[i]); } @@ -1383,12 +1529,14 @@ test(void) /* Check if user wants to quit */ char c; ret = poll(&fds, 1, 0); + if (ret > 0) { read(0, &c, 1); + if (c == 0x03 || c == 0x63 || c == 'q') { warnx("User abort\n"); - break; + break; } } } @@ -1461,6 +1609,7 @@ fmu_main(int argc, char *argv[]) new_mode = PORT_FULL_PWM; #if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + } else if (!strcmp(verb, "mode_serial")) { new_mode = PORT_FULL_SERIAL; @@ -1493,11 +1642,24 @@ fmu_main(int argc, char *argv[]) if (!strcmp(verb, "fake")) fake(argc - 1, argv + 1); + if (!strcmp(verb, "sensor_reset")) { + if (argc > 2) { + int reset_time = strtol(argv[2], 0, 0); + sensor_reset(reset_time); + + } else { + sensor_reset(0); + warnx("resettet default time"); + } + exit(0); + } + + fprintf(stderr, "FMU: unrecognised command, try:\n"); #if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) fprintf(stderr, " mode_gpio, mode_serial, mode_pwm, mode_gpio_serial, mode_pwm_serial, mode_pwm_gpio, test\n"); #elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) - fprintf(stderr, " mode_gpio, mode_pwm, test\n"); + fprintf(stderr, " mode_gpio, mode_pwm, test, sensor_reset [milliseconds]\n"); #endif exit(1); } diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index ef6ca04e9..4e9daf910 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -54,6 +54,7 @@ #include <unistd.h> #include <fcntl.h> #include <math.h> +#include <crc32.h> #include <arch/board/board.h> @@ -72,7 +73,6 @@ #include <systemlib/param/param.h> #include <uORB/topics/actuator_controls.h> -#include <uORB/topics/actuator_controls_effective.h> #include <uORB/topics/actuator_outputs.h> #include <uORB/topics/actuator_armed.h> #include <uORB/topics/safety.h> @@ -95,6 +95,8 @@ extern device::Device *PX4IO_serial_interface() weak_function; #define PX4IO_SET_DEBUG _IOC(0xff00, 0) #define PX4IO_INAIR_RESTART_ENABLE _IOC(0xff00, 1) +#define PX4IO_REBOOT_BOOTLOADER _IOC(0xff00, 2) +#define PX4IO_CHECK_CRC _IOC(0xff00, 3) #define UPDATE_INTERVAL_MIN 2 // 2 ms -> 500 Hz #define ORB_CHECK_INTERVAL 200000 // 200 ms -> 5 Hz @@ -226,30 +228,36 @@ private: device::Device *_interface; // XXX - unsigned _hardware; ///< Hardware revision - unsigned _max_actuators; ///<Maximum # of actuators supported by PX4IO - unsigned _max_controls; ///<Maximum # of controls supported by PX4IO - unsigned _max_rc_input; ///<Maximum receiver channels supported by PX4IO - unsigned _max_relays; ///<Maximum relays supported by PX4IO - unsigned _max_transfer; ///<Maximum number of I2C transfers supported by PX4IO + unsigned _hardware; ///< Hardware revision + unsigned _max_actuators; ///< Maximum # of actuators supported by PX4IO + unsigned _max_controls; ///< Maximum # of controls supported by PX4IO + unsigned _max_rc_input; ///< Maximum receiver channels supported by PX4IO + unsigned _max_relays; ///< Maximum relays supported by PX4IO + unsigned _max_transfer; ///< Maximum number of I2C transfers supported by PX4IO unsigned _update_interval; ///< Subscription interval limiting send rate bool _rc_handling_disabled; ///< If set, IO does not evaluate, but only forward the RC values + unsigned _rc_chan_count; ///< Internal copy of the last seen number of RC channels - volatile int _task; ///<worker task id - volatile bool _task_should_exit; ///<worker terminate flag + volatile int _task; ///< worker task id + volatile bool _task_should_exit; ///< worker terminate flag - int _mavlink_fd; ///<mavlink file descriptor. This is opened by class instantiation and Doesn't appear to be usable in main thread. - int _thread_mavlink_fd; ///<mavlink file descriptor for thread. + int _mavlink_fd; ///< mavlink file descriptor. This is opened by class instantiation and Doesn't appear to be usable in main thread. + int _thread_mavlink_fd; ///< mavlink file descriptor for thread. - perf_counter_t _perf_update; ///<local performance counter + perf_counter_t _perf_update; ///<local performance counter for status updates + perf_counter_t _perf_write; ///<local performance counter for PWM control writes + perf_counter_t _perf_chan_count; ///<local performance counter for channel number changes /* cached IO state */ - uint16_t _status; ///<Various IO status flags - uint16_t _alarms; ///<Various IO alarms + uint16_t _status; ///< Various IO status flags + uint16_t _alarms; ///< Various IO alarms /* subscribed topics */ - int _t_actuators; ///< actuator controls topic + int _t_actuator_controls_0; ///< actuator controls group 0 topic + int _t_actuator_controls_1; ///< actuator controls group 1 topic + int _t_actuator_controls_2; ///< actuator controls group 2 topic + int _t_actuator_controls_3; ///< actuator controls group 3 topic int _t_actuator_armed; ///< system armed control topic int _t_vehicle_control_mode;///< vehicle control mode topic int _t_param; ///< parameter update topic @@ -257,24 +265,22 @@ private: /* advertised topics */ orb_advert_t _to_input_rc; ///< rc inputs from io - orb_advert_t _to_actuators_effective; ///< effective actuator controls topic orb_advert_t _to_outputs; ///< mixed servo outputs topic orb_advert_t _to_battery; ///< battery status / voltage orb_advert_t _to_servorail; ///< servorail status orb_advert_t _to_safety; ///< status of safety actuator_outputs_s _outputs; ///<mixed outputs - actuator_controls_effective_s _controls_effective; ///<effective controls - bool _primary_pwm_device; ///<true if we are the default PWM output + bool _primary_pwm_device; ///< true if we are the default PWM output - float _battery_amp_per_volt; ///<current sensor amps/volt - float _battery_amp_bias; ///<current sensor bias - float _battery_mamphour_total;///<amp hours consumed so far - uint64_t _battery_last_timestamp;///<last amp hour calculation timestamp + float _battery_amp_per_volt; ///< current sensor amps/volt + float _battery_amp_bias; ///< current sensor bias + float _battery_mamphour_total;///< amp hours consumed so far + uint64_t _battery_last_timestamp;///< last amp hour calculation timestamp #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 - bool _dsm_vcc_ctl; ///<true if relay 1 controls DSM satellite RX power + bool _dsm_vcc_ctl; ///< true if relay 1 controls DSM satellite RX power #endif /** @@ -288,9 +294,14 @@ private: void task_main(); /** - * Send controls to IO + * Send controls for one group to IO */ - int io_set_control_state(); + int io_set_control_state(unsigned group); + + /** + * Send all controls to IO + */ + int io_set_control_groups(); /** * Update IO's arming-related state @@ -328,11 +339,6 @@ private: int io_publish_raw_rc(); /** - * Fetch and publish the mixed control values. - */ - int io_publish_mixed_controls(); - - /** * Fetch and publish the PWM servo outputs. */ int io_publish_pwm_outputs(); @@ -459,20 +465,25 @@ PX4IO::PX4IO(device::Device *interface) : _max_transfer(16), /* sensible default */ _update_interval(0), _rc_handling_disabled(false), + _rc_chan_count(0), _task(-1), _task_should_exit(false), _mavlink_fd(-1), _thread_mavlink_fd(-1), - _perf_update(perf_alloc(PC_ELAPSED, "px4io update")), + _perf_update(perf_alloc(PC_ELAPSED, "io update")), + _perf_write(perf_alloc(PC_ELAPSED, "io write")), + _perf_chan_count(perf_alloc(PC_COUNT, "io rc #")), _status(0), _alarms(0), - _t_actuators(-1), + _t_actuator_controls_0(-1), + _t_actuator_controls_1(-1), + _t_actuator_controls_2(-1), + _t_actuator_controls_3(-1), _t_actuator_armed(-1), _t_vehicle_control_mode(-1), _t_param(-1), _t_vehicle_command(-1), _to_input_rc(0), - _to_actuators_effective(0), _to_outputs(0), _to_battery(0), _to_servorail(0), @@ -769,15 +780,20 @@ PX4IO::task_main() * Subscribe to the appropriate PWM output topic based on whether we are the * primary PWM output or not. */ - _t_actuators = orb_subscribe(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS : - ORB_ID(actuator_controls_1)); - orb_set_interval(_t_actuators, 20); /* default to 50Hz */ + _t_actuator_controls_0 = orb_subscribe(ORB_ID(actuator_controls_0)); + orb_set_interval(_t_actuator_controls_0, 20); /* default to 50Hz */ + _t_actuator_controls_1 = orb_subscribe(ORB_ID(actuator_controls_1)); + orb_set_interval(_t_actuator_controls_1, 33); /* default to 30Hz */ + _t_actuator_controls_2 = orb_subscribe(ORB_ID(actuator_controls_2)); + orb_set_interval(_t_actuator_controls_2, 33); /* default to 30Hz */ + _t_actuator_controls_3 = orb_subscribe(ORB_ID(actuator_controls_3)); + orb_set_interval(_t_actuator_controls_3, 33); /* default to 30Hz */ _t_actuator_armed = orb_subscribe(ORB_ID(actuator_armed)); _t_vehicle_control_mode = orb_subscribe(ORB_ID(vehicle_control_mode)); _t_param = orb_subscribe(ORB_ID(parameter_update)); _t_vehicle_command = orb_subscribe(ORB_ID(vehicle_command)); - if ((_t_actuators < 0) || + if ((_t_actuator_controls_0 < 0) || (_t_actuator_armed < 0) || (_t_vehicle_control_mode < 0) || (_t_param < 0) || @@ -788,7 +804,7 @@ PX4IO::task_main() /* poll descriptor */ pollfd fds[1]; - fds[0].fd = _t_actuators; + fds[0].fd = _t_actuator_controls_0; fds[0].events = POLLIN; log("ready"); @@ -807,7 +823,11 @@ PX4IO::task_main() if (_update_interval > 100) _update_interval = 100; - orb_set_interval(_t_actuators, _update_interval); + orb_set_interval(_t_actuator_controls_0, _update_interval); + /* + * NOT changing the rate of groups 1-3 here, because only attitude + * really needs to run fast. + */ _update_interval = 0; } @@ -827,7 +847,10 @@ PX4IO::task_main() /* if we have new control data from the ORB, handle it */ if (fds[0].revents & POLLIN) { - io_set_control_state(); + + /* we're not nice to the lower-priority control groups and only check them + when the primary group updated (which is now). */ + io_set_control_groups(); } if (now >= poll_last + IO_POLL_INTERVAL) { @@ -840,8 +863,7 @@ PX4IO::task_main() /* get raw R/C input from IO */ io_publish_raw_rc(); - /* fetch mixed servo controls and PWM outputs from IO */ - io_publish_mixed_controls(); + /* fetch PWM outputs from IO */ io_publish_pwm_outputs(); } @@ -871,7 +893,7 @@ PX4IO::task_main() orb_copy(ORB_ID(vehicle_command), _t_vehicle_command, &cmd); // Check for a DSM pairing command - if ((cmd.command == VEHICLE_CMD_START_RX_PAIR) && (cmd.param1 == 0.0f)) { + if (((int)cmd.command == VEHICLE_CMD_START_RX_PAIR) && ((int)cmd.param1 == 0)) { dsm_bind_ioctl((int)cmd.param2); } } @@ -901,7 +923,23 @@ PX4IO::task_main() /* re-upload RC input config as it may have changed */ io_set_rc_config(); + + /* re-set the battery scaling */ + int32_t voltage_scaling_val; + param_t voltage_scaling_param; + + /* set battery voltage scaling */ + param_get(voltage_scaling_param = param_find("BAT_V_SCALE_IO"), &voltage_scaling_val); + + /* send scaling voltage to IO */ + uint16_t scaling = voltage_scaling_val; + int pret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_VBATT_SCALE, &scaling, 1); + + if (pret != OK) { + log("voltage scaling upload failed"); + } } + } perf_end(_perf_update); @@ -922,20 +960,74 @@ out: } int -PX4IO::io_set_control_state() +PX4IO::io_set_control_groups() +{ + bool attitude_ok = io_set_control_state(0); + + /* send auxiliary control groups */ + (void)io_set_control_state(1); + (void)io_set_control_state(2); + (void)io_set_control_state(3); + + return attitude_ok; +} + +int +PX4IO::io_set_control_state(unsigned group) { actuator_controls_s controls; ///< actuator outputs uint16_t regs[_max_actuators]; /* get controls */ - orb_copy(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS : - ORB_ID(actuator_controls_1), _t_actuators, &controls); + bool changed; + + switch (group) { + case 0: + { + orb_check(_t_actuator_controls_0, &changed); + + if (changed) { + orb_copy(ORB_ID(actuator_controls_0), _t_actuator_controls_0, &controls); + } + } + break; + case 1: + { + orb_check(_t_actuator_controls_1, &changed); + + if (changed) { + orb_copy(ORB_ID(actuator_controls_1), _t_actuator_controls_1, &controls); + } + } + break; + case 2: + { + orb_check(_t_actuator_controls_2, &changed); + + if (changed) { + orb_copy(ORB_ID(actuator_controls_2), _t_actuator_controls_2, &controls); + } + } + break; + case 3: + { + orb_check(_t_actuator_controls_3, &changed); + + if (changed) { + orb_copy(ORB_ID(actuator_controls_3), _t_actuator_controls_3, &controls); + } + } + break; + } + + if (!changed) + return -1; for (unsigned i = 0; i < _max_controls; i++) regs[i] = FLOAT_TO_REG(controls.control[i]); /* copy values to registers in IO */ - return io_reg_set(PX4IO_PAGE_CONTROLS, 0, regs, _max_controls); + return io_reg_set(PX4IO_PAGE_CONTROLS, group * PX4IO_PROTOCOL_MAX_CONTROL_COUNT, regs, _max_controls); } @@ -1031,7 +1123,12 @@ PX4IO::io_set_rc_config() if ((ichan >= 0) && (ichan < (int)_max_rc_input)) input_map[ichan - 1] = 3; - ichan = 4; + param_get(param_find("RC_MAP_MODE_SW"), &ichan); + + if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + input_map[ichan - 1] = 4; + + ichan = 5; for (unsigned i = 0; i < _max_rc_input; i++) if (input_map[i] == -1) @@ -1309,6 +1406,11 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) */ channel_count = regs[0]; + if (channel_count != _rc_chan_count) + perf_count(_perf_chan_count); + + _rc_chan_count = channel_count; + if (channel_count > 9) { ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_BASE + 9, ®s[prolog + 9], channel_count - 9); @@ -1364,50 +1466,6 @@ PX4IO::io_publish_raw_rc() } int -PX4IO::io_publish_mixed_controls() -{ - /* if no FMU comms(!) just don't publish */ - if (!(_status & PX4IO_P_STATUS_FLAGS_FMU_OK)) - return OK; - - /* if not taking raw PPM from us, must be mixing */ - if (_status & PX4IO_P_STATUS_FLAGS_RAW_PWM) - return OK; - - /* data we are going to fetch */ - actuator_controls_effective_s controls_effective; - controls_effective.timestamp = hrt_absolute_time(); - - /* get actuator controls from IO */ - uint16_t act[_max_actuators]; - int ret = io_reg_get(PX4IO_PAGE_ACTUATORS, 0, act, _max_actuators); - - if (ret != OK) - return ret; - - /* convert from register format to float */ - for (unsigned i = 0; i < _max_actuators; i++) - controls_effective.control_effective[i] = REG_TO_FLOAT(act[i]); - - /* laxily advertise on first publication */ - if (_to_actuators_effective == 0) { - _to_actuators_effective = - orb_advertise((_primary_pwm_device ? - ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE : - ORB_ID(actuator_controls_effective_1)), - &controls_effective); - - } else { - orb_publish((_primary_pwm_device ? - ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE : - ORB_ID(actuator_controls_effective_1)), - _to_actuators_effective, &controls_effective); - } - - return OK; -} - -int PX4IO::io_publish_pwm_outputs() { /* if no FMU comms(!) just don't publish */ @@ -1659,11 +1717,13 @@ void PX4IO::print_status() { /* basic configuration */ - printf("protocol %u hardware %u bootloader %u buffer %uB\n", + printf("protocol %u hardware %u bootloader %u buffer %uB crc 0x%04x%04x\n", io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_PROTOCOL_VERSION), io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_HARDWARE_VERSION), io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_BOOTLOADER_VERSION), - io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_MAX_TRANSFER)); + io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_MAX_TRANSFER), + io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_CRC), + io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_CRC+1)); printf("%u controls %u actuators %u R/C inputs %u analog inputs %u relays\n", io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_CONTROL_COUNT), io_reg_get(PX4IO_PAGE_CONFIG, PX4IO_P_CONFIG_ACTUATOR_COUNT), @@ -2146,6 +2206,29 @@ PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg) ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_SET_DEBUG, arg); break; + case PX4IO_REBOOT_BOOTLOADER: + if (system_status() & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) + return -EINVAL; + + /* reboot into bootloader - arg must be PX4IO_REBOOT_BL_MAGIC */ + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_REBOOT_BL, arg); + // we don't expect a reply from this operation + ret = OK; + break; + + case PX4IO_CHECK_CRC: { + /* check IO firmware CRC against passed value */ + uint32_t io_crc = 0; + ret = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_CRC, (uint16_t *)&io_crc, 2); + if (ret != OK) + return ret; + if (io_crc != arg) { + debug("crc mismatch 0x%08x 0x%08x", (unsigned)io_crc, arg); + return -EINVAL; + } + break; + } + case PX4IO_INAIR_RESTART_ENABLE: /* set/clear the 'in-air restart' bit */ @@ -2176,7 +2259,10 @@ PX4IO::write(file * /*filp*/, const char *buffer, size_t len) count = _max_actuators; if (count > 0) { + + perf_begin(_perf_write); int ret = io_reg_set(PX4IO_PAGE_DIRECT_PWM, 0, (uint16_t *)buffer, count); + perf_end(_perf_write); if (ret != OK) return ret; @@ -2255,7 +2341,7 @@ void start(int argc, char *argv[]) { if (g_dev != nullptr) - errx(1, "already loaded"); + errx(0, "already loaded"); /* allocate the interface */ device::Device *interface = get_interface(); @@ -2588,6 +2674,39 @@ px4io_main(int argc, char *argv[]) if_test((argc > 2) ? strtol(argv[2], NULL, 0) : 0); } + if (!strcmp(argv[1], "forceupdate")) { + /* + force update of the IO firmware without requiring + the user to hold the safety switch down + */ + if (argc <= 3) { + warnx("usage: px4io forceupdate MAGIC filename"); + exit(1); + } + if (g_dev == nullptr) { + warnx("px4io is not started, still attempting upgrade"); + } else { + uint16_t arg = atol(argv[2]); + int ret = g_dev->ioctl(nullptr, PX4IO_REBOOT_BOOTLOADER, arg); + if (ret != OK) { + printf("reboot failed - %d\n", ret); + exit(1); + } + + // tear down the px4io instance + delete g_dev; + } + + // upload the specified firmware + const char *fn[2]; + fn[0] = argv[3]; + fn[1] = nullptr; + PX4IO_Uploader *up = new PX4IO_Uploader; + up->upload(&fn[0]); + delete up; + exit(0); + } + /* commands below here require a started driver */ if (g_dev == nullptr) @@ -2673,6 +2792,49 @@ px4io_main(int argc, char *argv[]) exit(0); } + if (!strcmp(argv[1], "checkcrc")) { + /* + check IO CRC against CRC of a file + */ + if (argc <= 2) { + printf("usage: px4io checkcrc filename\n"); + exit(1); + } + if (g_dev == nullptr) { + printf("px4io is not started\n"); + exit(1); + } + int fd = open(argv[2], O_RDONLY); + if (fd == -1) { + printf("open of %s failed - %d\n", argv[2], errno); + exit(1); + } + const uint32_t app_size_max = 0xf000; + uint32_t fw_crc = 0; + uint32_t nbytes = 0; + while (true) { + uint8_t buf[16]; + int n = read(fd, buf, sizeof(buf)); + if (n <= 0) break; + fw_crc = crc32part(buf, n, fw_crc); + nbytes += n; + } + close(fd); + while (nbytes < app_size_max) { + uint8_t b = 0xff; + fw_crc = crc32part(&b, 1, fw_crc); + nbytes++; + } + + int ret = g_dev->ioctl(nullptr, PX4IO_CHECK_CRC, fw_crc); + if (ret != OK) { + printf("check CRC failed - %d\n", ret); + exit(1); + } + printf("CRCs match\n"); + exit(0); + } + if (!strcmp(argv[1], "rx_dsm") || !strcmp(argv[1], "rx_dsm_10bit") || !strcmp(argv[1], "rx_dsm_11bit") || @@ -2690,5 +2852,5 @@ px4io_main(int argc, char *argv[]) bind(argc, argv); out: - errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug',\n 'recovery', 'limit', 'current', 'bind' or 'update'"); + errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug',\n 'recovery', 'limit', 'current', 'bind', 'checkcrc', 'forceupdate' or 'update'"); } diff --git a/src/drivers/px4io/px4io_uploader.cpp b/src/drivers/px4io/px4io_uploader.cpp index d01dedb0d..41f93a8ee 100644 --- a/src/drivers/px4io/px4io_uploader.cpp +++ b/src/drivers/px4io/px4io_uploader.cpp @@ -274,7 +274,10 @@ PX4IO_Uploader::drain() int ret; do { - ret = recv(c, 1000); + // the small recv timeout here is to allow for fast + // drain when rebooting the io board for a forced + // update of the fw without using the safety switch + ret = recv(c, 40); #ifdef UDEBUG if (ret == OK) { diff --git a/src/drivers/stm32/drv_hrt.c b/src/drivers/stm32/drv_hrt.c index e79d7e10a..f105251f0 100644 --- a/src/drivers/stm32/drv_hrt.c +++ b/src/drivers/stm32/drv_hrt.c @@ -338,7 +338,12 @@ static void hrt_call_invoke(void); # define PPM_MIN_START 2500 /* shortest valid start gap */ /* decoded PPM buffer */ -#define PPM_MAX_CHANNELS 12 +#define PPM_MIN_CHANNELS 5 +#define PPM_MAX_CHANNELS 20 + +/* Number of same-sized frames required to 'lock' */ +#define PPM_CHANNEL_LOCK 4 /* should be less than the input timeout */ + __EXPORT uint16_t ppm_buffer[PPM_MAX_CHANNELS]; __EXPORT unsigned ppm_decoded_channels = 0; __EXPORT uint64_t ppm_last_valid_decode = 0; @@ -440,7 +445,7 @@ hrt_ppm_decode(uint32_t status) if (status & SR_OVF_PPM) goto error; - /* how long since the last edge? */ + /* how long since the last edge? - this handles counter wrapping implicitely. */ width = count - ppm.last_edge; ppm.last_edge = count; @@ -455,14 +460,38 @@ hrt_ppm_decode(uint32_t status) */ if (width >= PPM_MIN_START) { - /* export the last set of samples if we got something sensible */ - if (ppm.next_channel > 4) { - for (i = 0; i < ppm.next_channel && i < PPM_MAX_CHANNELS; i++) - ppm_buffer[i] = ppm_temp_buffer[i]; + /* + * If the number of channels changes unexpectedly, we don't want + * to just immediately jump on the new count as it may be a result + * of noise or dropped edges. Instead, take a few frames to settle. + */ + if (ppm.next_channel != ppm_decoded_channels) { + static unsigned new_channel_count; + static unsigned new_channel_holdoff; + + if (new_channel_count != ppm.next_channel) { + /* start the lock counter for the new channel count */ + new_channel_count = ppm.next_channel; + new_channel_holdoff = PPM_CHANNEL_LOCK; + + } else if (new_channel_holdoff > 0) { + /* this frame matched the last one, decrement the lock counter */ + new_channel_holdoff--; + + } else { + /* we have seen PPM_CHANNEL_LOCK frames with the new count, accept it */ + ppm_decoded_channels = new_channel_count; + new_channel_count = 0; + } - ppm_decoded_channels = i; - ppm_last_valid_decode = hrt_absolute_time(); + } else { + /* frame channel count matches expected, let's use it */ + if (ppm.next_channel > PPM_MIN_CHANNELS) { + for (i = 0; i < ppm.next_channel; i++) + ppm_buffer[i] = ppm_temp_buffer[i]; + ppm_last_valid_decode = hrt_absolute_time(); + } } /* reset for the next frame */ @@ -733,6 +762,13 @@ hrt_call_internal(struct hrt_call *entry, hrt_abstime deadline, hrt_abstime inte irqstate_t flags = irqsave(); /* if the entry is currently queued, remove it */ + /* note that we are using a potentially uninitialised + entry->link here, but it is safe as sq_rem() doesn't + dereference the passed node unless it is found in the + list. So we potentially waste a bit of time searching the + queue for the uninitialised entry->link but we don't do + anything actually unsafe. + */ if (entry->deadline != 0) sq_rem(&entry->link, &callout_queue); @@ -839,7 +875,12 @@ hrt_call_invoke(void) /* if the callout has a non-zero period, it has to be re-entered */ if (call->period != 0) { - call->deadline = deadline + call->period; + // re-check call->deadline to allow for + // callouts to re-schedule themselves + // using hrt_call_delay() + if (call->deadline <= now) { + call->deadline = deadline + call->period; + } hrt_call_enter(call); } } @@ -906,5 +947,16 @@ hrt_latency_update(void) latency_counters[index]++; } +void +hrt_call_init(struct hrt_call *entry) +{ + memset(entry, 0, sizeof(*entry)); +} + +void +hrt_call_delay(struct hrt_call *entry, hrt_abstime delay) +{ + entry->deadline = hrt_absolute_time() + delay; +} #endif /* HRT_TIMER */ diff --git a/src/examples/flow_position_control/flow_position_control_main.c b/src/examples/flow_position_control/flow_position_control_main.c index 3125ce246..391e40ac1 100644 --- a/src/examples/flow_position_control/flow_position_control_main.c +++ b/src/examples/flow_position_control/flow_position_control_main.c @@ -61,7 +61,6 @@ #include <uORB/topics/manual_control_setpoint.h> #include <uORB/topics/vehicle_local_position.h> #include <uORB/topics/vehicle_bodyframe_speed_setpoint.h> -#include <uORB/topics/vehicle_local_position_setpoint.h> #include <uORB/topics/filtered_bottom_flow.h> #include <systemlib/systemlib.h> #include <systemlib/perf_counter.h> diff --git a/src/lib/external_lgpl/tecs/tecs.cpp b/src/lib/external_lgpl/tecs/tecs.cpp index d089be080..5a56dce65 100644 --- a/src/lib/external_lgpl/tecs/tecs.cpp +++ b/src/lib/external_lgpl/tecs/tecs.cpp @@ -433,10 +433,18 @@ void TECS::_update_pitch(void) // Apply max and min values for integrator state that will allow for no more than // 5deg of saturation. This allows for some pitch variation due to gusts before the // integrator is clipped. Otherwise the effectiveness of the integrator will be reduced in turbulence + // During climbout/takeoff, bias the demanded pitch angle so that zero speed error produces a pitch angle + // demand equal to the minimum value (which is )set by the mission plan during this mode). Otherwise the + // integrator has to catch up before the nose can be raised to reduce speed during climbout. float gainInv = (_integ5_state * _timeConst * CONSTANTS_ONE_G); float temp = SEB_error + SEBdot_error * _ptchDamp + SEBdot_dem * _timeConst; + if (_climbOutDem) + { + temp += _PITCHminf * gainInv; + } _integ7_state = constrain(_integ7_state, (gainInv * (_PITCHminf - 0.0783f)) - temp, (gainInv * (_PITCHmaxf + 0.0783f)) - temp); + // Calculate pitch demand from specific energy balance signals _pitch_dem_unc = (temp + _integ7_state) / gainInv; diff --git a/src/lib/mathlib/math/filter/LowPassFilter2p.cpp b/src/lib/mathlib/math/filter/LowPassFilter2p.cpp index efb17225d..3699d9bce 100644 --- a/src/lib/mathlib/math/filter/LowPassFilter2p.cpp +++ b/src/lib/mathlib/math/filter/LowPassFilter2p.cpp @@ -46,6 +46,10 @@ namespace math void LowPassFilter2p::set_cutoff_frequency(float sample_freq, float cutoff_freq) { _cutoff_freq = cutoff_freq; + if (_cutoff_freq <= 0.0f) { + // no filtering + return; + } float fr = sample_freq/_cutoff_freq; float ohm = tanf(M_PI_F/fr); float c = 1.0f+2.0f*cosf(M_PI_F/4.0f)*ohm + ohm*ohm; @@ -58,6 +62,10 @@ void LowPassFilter2p::set_cutoff_frequency(float sample_freq, float cutoff_freq) float LowPassFilter2p::apply(float sample) { + if (_cutoff_freq <= 0.0f) { + // no filtering + return sample; + } // do the filtering float delay_element_0 = sample - _delay_element_1 * _a1 - _delay_element_2 * _a2; if (isnan(delay_element_0) || isinf(delay_element_0)) { diff --git a/src/modules/attitude_estimator_so3/README b/src/modules/attitude_estimator_so3/README new file mode 100644 index 000000000..02ab66ee4 --- /dev/null +++ b/src/modules/attitude_estimator_so3/README @@ -0,0 +1,3 @@ +Synopsis + + nsh> attitude_estimator_so3_comp start
\ No newline at end of file diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_main.cpp b/src/modules/attitude_estimator_so3/attitude_estimator_so3_main.cpp index 86bda3c75..e79726613 100755 --- a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_main.cpp +++ b/src/modules/attitude_estimator_so3/attitude_estimator_so3_main.cpp @@ -1,16 +1,49 @@ -/* - * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * Author: Hyon Lim <limhyon@gmail.com> + * Anton Babushkin <anton.babushkin@me.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: * - * @file attitude_estimator_so3_comp_main.c + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + + /* + * @file attitude_estimator_so3_main.cpp * * Implementation of nonlinear complementary filters on the SO(3). * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. - * + * * Theory of nonlinear complementary filters on the SO(3) is based on [1]. * Quaternion realization of [1] is based on [2]. * Optmized quaternion update code is based on Sebastian Madgwick's implementation. - * + * * References * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 @@ -46,94 +79,91 @@ #ifdef __cplusplus extern "C" { #endif -#include "attitude_estimator_so3_comp_params.h" +#include "attitude_estimator_so3_params.h" #ifdef __cplusplus } #endif -extern "C" __EXPORT int attitude_estimator_so3_comp_main(int argc, char *argv[]); +extern "C" __EXPORT int attitude_estimator_so3_main(int argc, char *argv[]); static bool thread_should_exit = false; /**< Deamon exit flag */ static bool thread_running = false; /**< Deamon status flag */ -static int attitude_estimator_so3_comp_task; /**< Handle of deamon task / thread */ +static int attitude_estimator_so3_task; /**< Handle of deamon task / thread */ + +//! Auxiliary variables to reduce number of repeated operations static float q0 = 1.0f, q1 = 0.0f, q2 = 0.0f, q3 = 0.0f; /** quaternion of sensor frame relative to auxiliary frame */ static float dq0 = 0.0f, dq1 = 0.0f, dq2 = 0.0f, dq3 = 0.0f; /** quaternion of sensor frame relative to auxiliary frame */ static float gyro_bias[3] = {0.0f, 0.0f, 0.0f}; /** bias estimation */ -static bool bFilterInit = false; - -//! Auxiliary variables to reduce number of repeated operations static float q0q0, q0q1, q0q2, q0q3; static float q1q1, q1q2, q1q3; static float q2q2, q2q3; static float q3q3; - -//! Serial packet related -static int uart; -static int baudrate; +static bool bFilterInit = false; /** - * Mainloop of attitude_estimator_so3_comp. + * Mainloop of attitude_estimator_so3. */ -int attitude_estimator_so3_comp_thread_main(int argc, char *argv[]); +int attitude_estimator_so3_thread_main(int argc, char *argv[]); /** * Print the correct usage. */ static void usage(const char *reason); +/* Function prototypes */ +float invSqrt(float number); +void NonlinearSO3AHRSinit(float ax, float ay, float az, float mx, float my, float mz); +void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz, float twoKp, float twoKi, float dt); + static void usage(const char *reason) { if (reason) fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: attitude_estimator_so3_comp {start|stop|status} [-d <devicename>] [-b <baud rate>]\n" - "-d and -b options are for separate visualization with raw data (quaternion packet) transfer\n" - "ex) attitude_estimator_so3_comp start -d /dev/ttyS1 -b 115200\n"); + fprintf(stderr, "usage: attitude_estimator_so3 {start|stop|status}\n"); exit(1); } /** - * The attitude_estimator_so3_comp app only briefly exists to start + * The attitude_estimator_so3 app only briefly exists to start * the background job. The stack size assigned in the * Makefile does only apply to this management task. * * The actual stack size should be set in the call * to task_create(). */ -int attitude_estimator_so3_comp_main(int argc, char *argv[]) +int attitude_estimator_so3_main(int argc, char *argv[]) { if (argc < 1) usage("missing command"); - - if (!strcmp(argv[1], "start")) { if (thread_running) { - printf("attitude_estimator_so3_comp already running\n"); + warnx("already running\n"); /* this is not an error */ exit(0); } thread_should_exit = false; - attitude_estimator_so3_comp_task = task_spawn_cmd("attitude_estimator_so3_comp", + attitude_estimator_so3_task = task_spawn_cmd("attitude_estimator_so3", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 5, - 12400, - attitude_estimator_so3_comp_thread_main, - (const char **)argv); + 14000, + attitude_estimator_so3_thread_main, + (argv) ? (const char **)&argv[2] : (const char **)NULL); exit(0); } if (!strcmp(argv[1], "stop")) { thread_should_exit = true; - while(thread_running){ + while (thread_running){ usleep(200000); - printf("."); } - printf("terminated."); + + warnx("stopped"); exit(0); } @@ -157,7 +187,8 @@ int attitude_estimator_so3_comp_main(int argc, char *argv[]) //--------------------------------------------------------------------------------------------------- // Fast inverse square-root // See: http://en.wikipedia.org/wiki/Fast_inverse_square_root -float invSqrt(float number) { +float invSqrt(float number) +{ volatile long i; volatile float x, y; volatile const float f = 1.5F; @@ -221,48 +252,47 @@ void NonlinearSO3AHRSinit(float ax, float ay, float az, float mx, float my, floa q3q3 = q3 * q3; } -void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz, float twoKp, float twoKi, float dt) { +void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz, float twoKp, float twoKi, float dt) +{ float recipNorm; float halfex = 0.0f, halfey = 0.0f, halfez = 0.0f; - //! Make filter converge to initial solution faster - //! This function assumes you are in static position. - //! WARNING : in case air reboot, this can cause problem. But this is very - //! unlikely happen. - if(bFilterInit == false) - { + // Make filter converge to initial solution faster + // This function assumes you are in static position. + // WARNING : in case air reboot, this can cause problem. But this is very unlikely happen. + if(bFilterInit == false) { NonlinearSO3AHRSinit(ax,ay,az,mx,my,mz); bFilterInit = true; } //! If magnetometer measurement is available, use it. - if((mx == 0.0f) && (my == 0.0f) && (mz == 0.0f)) { + if(!((mx == 0.0f) && (my == 0.0f) && (mz == 0.0f))) { float hx, hy, hz, bx, bz; float halfwx, halfwy, halfwz; // Normalise magnetometer measurement // Will sqrt work better? PX4 system is powerful enough? - recipNorm = invSqrt(mx * mx + my * my + mz * mz); - mx *= recipNorm; - my *= recipNorm; - mz *= recipNorm; + recipNorm = invSqrt(mx * mx + my * my + mz * mz); + mx *= recipNorm; + my *= recipNorm; + mz *= recipNorm; - // Reference direction of Earth's magnetic field - hx = 2.0f * (mx * (0.5f - q2q2 - q3q3) + my * (q1q2 - q0q3) + mz * (q1q3 + q0q2)); - hy = 2.0f * (mx * (q1q2 + q0q3) + my * (0.5f - q1q1 - q3q3) + mz * (q2q3 - q0q1)); - hz = 2 * mx * (q1q3 - q0q2) + 2 * my * (q2q3 + q0q1) + 2 * mz * (0.5 - q1q1 - q2q2); - bx = sqrt(hx * hx + hy * hy); - bz = hz; + // Reference direction of Earth's magnetic field + hx = 2.0f * (mx * (0.5f - q2q2 - q3q3) + my * (q1q2 - q0q3) + mz * (q1q3 + q0q2)); + hy = 2.0f * (mx * (q1q2 + q0q3) + my * (0.5f - q1q1 - q3q3) + mz * (q2q3 - q0q1)); + hz = 2.0f * mx * (q1q3 - q0q2) + 2.0f * my * (q2q3 + q0q1) + 2.0f * mz * (0.5f - q1q1 - q2q2); + bx = sqrt(hx * hx + hy * hy); + bz = hz; - // Estimated direction of magnetic field - halfwx = bx * (0.5f - q2q2 - q3q3) + bz * (q1q3 - q0q2); - halfwy = bx * (q1q2 - q0q3) + bz * (q0q1 + q2q3); - halfwz = bx * (q0q2 + q1q3) + bz * (0.5f - q1q1 - q2q2); + // Estimated direction of magnetic field + halfwx = bx * (0.5f - q2q2 - q3q3) + bz * (q1q3 - q0q2); + halfwy = bx * (q1q2 - q0q3) + bz * (q0q1 + q2q3); + halfwz = bx * (q0q2 + q1q3) + bz * (0.5f - q1q1 - q2q2); - // Error is sum of cross product between estimated direction and measured direction of field vectors - halfex += (my * halfwz - mz * halfwy); - halfey += (mz * halfwx - mx * halfwz); - halfez += (mx * halfwy - my * halfwx); + // Error is sum of cross product between estimated direction and measured direction of field vectors + halfex += (my * halfwz - mz * halfwy); + halfey += (mz * halfwx - mx * halfwz); + halfez += (mx * halfwy - my * halfwx); } // Compute feedback only if accelerometer measurement valid (avoids NaN in accelerometer normalisation) @@ -293,7 +323,9 @@ void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, fl gyro_bias[0] += twoKi * halfex * dt; // integral error scaled by Ki gyro_bias[1] += twoKi * halfey * dt; gyro_bias[2] += twoKi * halfez * dt; - gx += gyro_bias[0]; // apply integral feedback + + // apply integral feedback + gx += gyro_bias[0]; gy += gyro_bias[1]; gz += gyro_bias[2]; } @@ -337,208 +369,43 @@ void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, fl q3 *= recipNorm; // Auxiliary variables to avoid repeated arithmetic - q0q0 = q0 * q0; - q0q1 = q0 * q1; - q0q2 = q0 * q2; - q0q3 = q0 * q3; - q1q1 = q1 * q1; - q1q2 = q1 * q2; + q0q0 = q0 * q0; + q0q1 = q0 * q1; + q0q2 = q0 * q2; + q0q3 = q0 * q3; + q1q1 = q1 * q1; + q1q2 = q1 * q2; q1q3 = q1 * q3; - q2q2 = q2 * q2; - q2q3 = q2 * q3; - q3q3 = q3 * q3; -} - -void send_uart_byte(char c) -{ - write(uart,&c,1); -} - -void send_uart_bytes(uint8_t *data, int length) -{ - write(uart,data,(size_t)(sizeof(uint8_t)*length)); -} - -void send_uart_float(float f) { - uint8_t * b = (uint8_t *) &f; - - //! Assume float is 4-bytes - for(int i=0; i<4; i++) { - - uint8_t b1 = (b[i] >> 4) & 0x0f; - uint8_t b2 = (b[i] & 0x0f); - - uint8_t c1 = (b1 < 10) ? ('0' + b1) : 'A' + b1 - 10; - uint8_t c2 = (b2 < 10) ? ('0' + b2) : 'A' + b2 - 10; - - send_uart_bytes(&c1,1); - send_uart_bytes(&c2,1); - } -} - -void send_uart_float_arr(float *arr, int length) -{ - for(int i=0;i<length;++i) - { - send_uart_float(arr[i]); - send_uart_byte(','); - } -} - -int open_uart(int baud, const char *uart_name, struct termios *uart_config_original, bool *is_usb) -{ - int speed; - - switch (baud) { - case 0: speed = B0; break; - case 50: speed = B50; break; - case 75: speed = B75; break; - case 110: speed = B110; break; - case 134: speed = B134; break; - case 150: speed = B150; break; - case 200: speed = B200; break; - case 300: speed = B300; break; - case 600: speed = B600; break; - case 1200: speed = B1200; break; - case 1800: speed = B1800; break; - case 2400: speed = B2400; break; - case 4800: speed = B4800; break; - case 9600: speed = B9600; break; - case 19200: speed = B19200; break; - case 38400: speed = B38400; break; - case 57600: speed = B57600; break; - case 115200: speed = B115200; break; - case 230400: speed = B230400; break; - case 460800: speed = B460800; break; - case 921600: speed = B921600; break; - default: - printf("ERROR: Unsupported baudrate: %d\n\tsupported examples:\n\n\t9600\n19200\n38400\n57600\n115200\n230400\n460800\n921600\n\n", baud); - return -EINVAL; - } - - printf("[so3_comp_filt] UART is %s, baudrate is %d\n", uart_name, baud); - uart = open(uart_name, O_RDWR | O_NOCTTY); - - /* Try to set baud rate */ - struct termios uart_config; - int termios_state; - *is_usb = false; - - /* make some wild guesses including that USB serial is indicated by either /dev/ttyACM0 or /dev/console */ - if (strcmp(uart_name, "/dev/ttyACM0") != OK && strcmp(uart_name, "/dev/console") != OK) { - /* Back up the original uart configuration to restore it after exit */ - if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { - printf("ERROR getting baudrate / termios config for %s: %d\n", uart_name, termios_state); - close(uart); - return -1; - } - - /* Fill the struct for the new configuration */ - tcgetattr(uart, &uart_config); - - /* Clear ONLCR flag (which appends a CR for every LF) */ - uart_config.c_oflag &= ~ONLCR; - - /* Set baud rate */ - if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { - printf("ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); - close(uart); - return -1; - } - - - if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { - printf("ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); - close(uart); - return -1; - } - - } else { - *is_usb = true; - } - - return uart; + q2q2 = q2 * q2; + q2q3 = q2 * q3; + q3q3 = q3 * q3; } /* - * [Rot_matrix,x_aposteriori,P_aposteriori] = attitudeKalmanfilter(dt,z_k,x_aposteriori_k,P_aposteriori_k,knownConst) - */ - -/* - * EKF Attitude Estimator main function. + * Nonliner complementary filter on SO(3), attitude estimator main function. * - * Estimates the attitude recursively once started. + * Estimates the attitude once started. * * @param argc number of commandline arguments (plus command name) * @param argv strings containing the arguments */ -int attitude_estimator_so3_comp_thread_main(int argc, char *argv[]) +int attitude_estimator_so3_thread_main(int argc, char *argv[]) { - -const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds - - //! Serial debug related - int ch; - struct termios uart_config_original; - bool usb_uart; - bool debug_mode = false; - char *device_name = "/dev/ttyS2"; - baudrate = 115200; + const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds //! Time constant float dt = 0.005f; /* output euler angles */ float euler[3] = {0.0f, 0.0f, 0.0f}; - - float Rot_matrix[9] = {1.f, 0, 0, - 0, 1.f, 0, - 0, 0, 1.f - }; /**< init: identity matrix */ - + + /* Initialization */ + float Rot_matrix[9] = {1.f, 0.0f, 0.0f, 0.0f, 1.f, 0.0f, 0.0f, 0.0f, 1.f }; /**< init: identity matrix */ float acc[3] = {0.0f, 0.0f, 0.0f}; float gyro[3] = {0.0f, 0.0f, 0.0f}; float mag[3] = {0.0f, 0.0f, 0.0f}; - /* work around some stupidity in task_create's argv handling */ - argc -= 2; - argv += 2; - - //! -d <device_name>, default : /dev/ttyS2 - //! -b <baud_rate>, default : 115200 - while ((ch = getopt(argc,argv,"d:b:")) != EOF){ - switch(ch){ - case 'b': - baudrate = strtoul(optarg, NULL, 10); - if(baudrate == 0) - printf("invalid baud rate '%s'",optarg); - break; - case 'd': - device_name = optarg; - debug_mode = true; - break; - default: - usage("invalid argument"); - } - } - - if(debug_mode){ - printf("Opening debugging port for 3D visualization\n"); - uart = open_uart(baudrate, device_name, &uart_config_original, &usb_uart); - if (uart < 0) - printf("could not open %s", device_name); - else - printf("Open port success\n"); - } - - // print text - printf("Nonlinear SO3 Attitude Estimator initialized..\n\n"); - fflush(stdout); - - int overloadcounter = 19; - - /* store start time to guard against too slow update rates */ - uint64_t last_run = hrt_absolute_time(); + warnx("main thread started"); struct sensor_combined_s raw; memset(&raw, 0, sizeof(raw)); @@ -555,8 +422,8 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds /* subscribe to raw data */ int sub_raw = orb_subscribe(ORB_ID(sensor_combined)); - /* rate-limit raw data updates to 200Hz */ - orb_set_interval(sub_raw, 4); + /* rate-limit raw data updates to 333 Hz (sensors app publishes at 200, so this is just paranoid) */ + orb_set_interval(sub_raw, 3); /* subscribe to param changes */ int sub_params = orb_subscribe(ORB_ID(parameter_update)); @@ -565,17 +432,15 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds int sub_control_mode = orb_subscribe(ORB_ID(vehicle_control_mode)); /* advertise attitude */ - orb_advert_t pub_att = orb_advertise(ORB_ID(vehicle_attitude), &att); + //orb_advert_t pub_att = orb_advertise(ORB_ID(vehicle_attitude), &att); + //orb_advert_t att_pub = -1; + orb_advert_t att_pub = orb_advertise(ORB_ID(vehicle_attitude), &att); int loopcounter = 0; int printcounter = 0; thread_running = true; - /* advertise debug value */ - // struct debug_key_value_s dbg = { .key = "", .value = 0.0f }; - // orb_advert_t pub_dbg = -1; - float sensor_update_hz[3] = {0.0f, 0.0f, 0.0f}; // XXX write this out to perf regs @@ -583,20 +448,22 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds uint32_t sensor_last_count[3] = {0, 0, 0}; uint64_t sensor_last_timestamp[3] = {0, 0, 0}; - struct attitude_estimator_so3_comp_params so3_comp_params; - struct attitude_estimator_so3_comp_param_handles so3_comp_param_handles; + struct attitude_estimator_so3_params so3_comp_params; + struct attitude_estimator_so3_param_handles so3_comp_param_handles; /* initialize parameter handles */ parameters_init(&so3_comp_param_handles); + parameters_update(&so3_comp_param_handles, &so3_comp_params); uint64_t start_time = hrt_absolute_time(); bool initialized = false; + bool state_initialized = false; float gyro_offsets[3] = { 0.0f, 0.0f, 0.0f }; unsigned offset_count = 0; /* register the perf counter */ - perf_counter_t so3_comp_loop_perf = perf_alloc(PC_ELAPSED, "attitude_estimator_so3_comp"); + perf_counter_t so3_comp_loop_perf = perf_alloc(PC_ELAPSED, "attitude_estimator_so3"); /* Main loop*/ while (!thread_should_exit) { @@ -615,12 +482,9 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds orb_copy(ORB_ID(vehicle_control_mode), sub_control_mode, &control_mode); if (!control_mode.flag_system_hil_enabled) { - fprintf(stderr, - "[att so3_comp] WARNING: Not getting sensors - sensor app running?\n"); + warnx("WARNING: Not getting sensors - sensor app running?"); } - } else { - /* only update parameters if they changed */ if (fds[1].revents & POLLIN) { /* read from param to clear updated flag */ @@ -644,11 +508,12 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds gyro_offsets[2] += raw.gyro_rad_s[2]; offset_count++; - if (hrt_absolute_time() - start_time > 3000000LL) { + if (hrt_absolute_time() > start_time + 3000000l) { initialized = true; gyro_offsets[0] /= offset_count; gyro_offsets[1] /= offset_count; gyro_offsets[2] /= offset_count; + warnx("gyro initialized, offsets: %.5f %.5f %.5f", gyro_offsets[0], gyro_offsets[1], gyro_offsets[2]); } } else { @@ -668,9 +533,9 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds sensor_last_timestamp[0] = raw.timestamp; } - gyro[0] = raw.gyro_rad_s[0] - gyro_offsets[0]; - gyro[1] = raw.gyro_rad_s[1] - gyro_offsets[1]; - gyro[2] = raw.gyro_rad_s[2] - gyro_offsets[2]; + gyro[0] = raw.gyro_rad_s[0] - gyro_offsets[0]; + gyro[1] = raw.gyro_rad_s[1] - gyro_offsets[1]; + gyro[2] = raw.gyro_rad_s[2] - gyro_offsets[2]; /* update accelerometer measurements */ if (sensor_last_count[1] != raw.accelerometer_counter) { @@ -696,31 +561,14 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds mag[1] = raw.magnetometer_ga[1]; mag[2] = raw.magnetometer_ga[2]; - uint64_t now = hrt_absolute_time(); - unsigned int time_elapsed = now - last_run; - last_run = now; - - if (time_elapsed > loop_interval_alarm) { - //TODO: add warning, cpu overload here - // if (overloadcounter == 20) { - // printf("CPU OVERLOAD DETECTED IN ATTITUDE ESTIMATOR EKF (%lu > %lu)\n", time_elapsed, loop_interval_alarm); - // overloadcounter = 0; - // } - - overloadcounter++; - } - - static bool const_initialized = false; - /* initialize with good values once we have a reasonable dt estimate */ - if (!const_initialized && dt < 0.05f && dt > 0.005f) { - dt = 0.005f; - parameters_update(&so3_comp_param_handles, &so3_comp_params); - const_initialized = true; + if (!state_initialized && dt < 0.05f && dt > 0.001f) { + state_initialized = true; + warnx("state initialized"); } /* do not execute the filter if not initialized */ - if (!const_initialized) { + if (!state_initialized) { continue; } @@ -728,18 +576,23 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds // NOTE : Accelerometer is reversed. // Because proper mount of PX4 will give you a reversed accelerometer readings. - NonlinearSO3AHRSupdate(gyro[0],gyro[1],gyro[2],-acc[0],-acc[1],-acc[2],mag[0],mag[1],mag[2],so3_comp_params.Kp,so3_comp_params.Ki, dt); + NonlinearSO3AHRSupdate(gyro[0], gyro[1], gyro[2], + -acc[0], -acc[1], -acc[2], + mag[0], mag[1], mag[2], + so3_comp_params.Kp, + so3_comp_params.Ki, + dt); // Convert q->R, This R converts inertial frame to body frame. Rot_matrix[0] = q0q0 + q1q1 - q2q2 - q3q3;// 11 - Rot_matrix[1] = 2.0 * (q1*q2 + q0*q3); // 12 - Rot_matrix[2] = 2.0 * (q1*q3 - q0*q2); // 13 - Rot_matrix[3] = 2.0 * (q1*q2 - q0*q3); // 21 - Rot_matrix[4] = q0q0 - q1q1 + q2q2 - q3q3;// 22 - Rot_matrix[5] = 2.0 * (q2*q3 + q0*q1); // 23 - Rot_matrix[6] = 2.0 * (q1*q3 + q0*q2); // 31 - Rot_matrix[7] = 2.0 * (q2*q3 - q0*q1); // 32 - Rot_matrix[8] = q0q0 - q1q1 - q2q2 + q3q3;// 33 + Rot_matrix[1] = 2.f * (q1*q2 + q0*q3); // 12 + Rot_matrix[2] = 2.f * (q1*q3 - q0*q2); // 13 + Rot_matrix[3] = 2.f * (q1*q2 - q0*q3); // 21 + Rot_matrix[4] = q0q0 - q1q1 + q2q2 - q3q3;// 22 + Rot_matrix[5] = 2.f * (q2*q3 + q0*q1); // 23 + Rot_matrix[6] = 2.f * (q1*q3 + q0*q2); // 31 + Rot_matrix[7] = 2.f * (q2*q3 - q0*q1); // 32 + Rot_matrix[8] = q0q0 - q1q1 - q2q2 + q3q3;// 33 //1-2-3 Representation. //Equation (290) @@ -747,29 +600,42 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds // Existing PX4 EKF code was generated by MATLAB which uses coloum major order matrix. euler[0] = atan2f(Rot_matrix[5], Rot_matrix[8]); //! Roll euler[1] = -asinf(Rot_matrix[2]); //! Pitch - euler[2] = atan2f(Rot_matrix[1],Rot_matrix[0]); //! Yaw + euler[2] = atan2f(Rot_matrix[1], Rot_matrix[0]); //! Yaw /* swap values for next iteration, check for fatal inputs */ if (isfinite(euler[0]) && isfinite(euler[1]) && isfinite(euler[2])) { - /* Do something */ + // Publish only finite euler angles + att.roll = euler[0] - so3_comp_params.roll_off; + att.pitch = euler[1] - so3_comp_params.pitch_off; + att.yaw = euler[2] - so3_comp_params.yaw_off; } else { /* due to inputs or numerical failure the output is invalid, skip it */ + // Due to inputs or numerical failure the output is invalid + warnx("infinite euler angles, rotation matrix:"); + warnx("%.3f %.3f %.3f", Rot_matrix[0], Rot_matrix[1], Rot_matrix[2]); + warnx("%.3f %.3f %.3f", Rot_matrix[3], Rot_matrix[4], Rot_matrix[5]); + warnx("%.3f %.3f %.3f", Rot_matrix[6], Rot_matrix[7], Rot_matrix[8]); + // Don't publish anything continue; } - if (last_data > 0 && raw.timestamp - last_data > 12000) printf("[attitude estimator so3_comp] sensor data missed! (%llu)\n", raw.timestamp - last_data); + if (last_data > 0 && raw.timestamp > last_data + 12000) { + warnx("sensor data missed"); + } last_data = raw.timestamp; /* send out */ att.timestamp = raw.timestamp; + + // Quaternion + att.q[0] = q0; + att.q[1] = q1; + att.q[2] = q2; + att.q[3] = q3; + att.q_valid = true; - // XXX Apply the same transformation to the rotation matrix - att.roll = euler[0] - so3_comp_params.roll_off; - att.pitch = euler[1] - so3_comp_params.pitch_off; - att.yaw = euler[2] - so3_comp_params.yaw_off; - - //! Euler angle rate. But it needs to be investigated again. + // Euler angle rate. But it needs to be investigated again. /* att.rollspeed = 2.0f*(-q1*dq0 + q0*dq1 - q3*dq2 + q2*dq3); att.pitchspeed = 2.0f*(-q2*dq0 + q3*dq1 + q0*dq2 - q1*dq3); @@ -783,53 +649,30 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds att.pitchacc = 0; att.yawacc = 0; - //! Quaternion - att.q[0] = q0; - att.q[1] = q1; - att.q[2] = q2; - att.q[3] = q3; - att.q_valid = true; - /* TODO: Bias estimation required */ memcpy(&att.rate_offsets, &(gyro_bias), sizeof(att.rate_offsets)); /* copy rotation matrix */ memcpy(&att.R, Rot_matrix, sizeof(float)*9); att.R_valid = true; - - if (isfinite(att.roll) && isfinite(att.pitch) && isfinite(att.yaw)) { - // Broadcast - orb_publish(ORB_ID(vehicle_attitude), pub_att, &att); - + + // Publish + if (att_pub > 0) { + orb_publish(ORB_ID(vehicle_attitude), att_pub, &att); } else { warnx("NaN in roll/pitch/yaw estimate!"); + orb_advertise(ORB_ID(vehicle_attitude), &att); } perf_end(so3_comp_loop_perf); - - //! This will print out debug packet to visualization software - if(debug_mode) - { - float quat[4]; - quat[0] = q0; - quat[1] = q1; - quat[2] = q2; - quat[3] = q3; - send_uart_float_arr(quat,4); - send_uart_byte('\n'); - } } } } loopcounter++; - }// while + } thread_running = false; - /* Reset the UART flags to original state */ - if (!usb_uart) - tcsetattr(uart, TCSANOW, &uart_config_original); - return 0; } diff --git a/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.c b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.c new file mode 100755 index 000000000..0c8d522b4 --- /dev/null +++ b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.c @@ -0,0 +1,86 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * Author: Hyon Lim <limhyon@gmail.com> + * Anton Babushkin <anton.babushkin@me.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* + * @file attitude_estimator_so3_params.c + * + * Parameters for nonlinear complementary filters on the SO(3). + */ + +#include "attitude_estimator_so3_params.h" + +/* This is filter gain for nonlinear SO3 complementary filter */ +/* NOTE : How to tune the gain? First of all, stick with this default gain. And let the quad in stable place. + Log the steady state reponse of filter. If it is too slow, increase SO3_COMP_KP. + If you are flying from ground to high altitude in short amount of time, please increase SO3_COMP_KI which + will compensate gyro bias which depends on temperature and vibration of your vehicle */ +PARAM_DEFINE_FLOAT(SO3_COMP_KP, 1.0f); //! This parameter will give you about 15 seconds convergence time. + //! You can set this gain higher if you want more fast response. + //! But note that higher gain will give you also higher overshoot. +PARAM_DEFINE_FLOAT(SO3_COMP_KI, 0.05f); //! This gain will incorporate slow time-varying bias (e.g., temperature change) + //! This gain is depend on your vehicle status. + +/* offsets in roll, pitch and yaw of sensor plane and body */ +PARAM_DEFINE_FLOAT(SO3_ROLL_OFFS, 0.0f); +PARAM_DEFINE_FLOAT(SO3_PITCH_OFFS, 0.0f); +PARAM_DEFINE_FLOAT(SO3_YAW_OFFS, 0.0f); + +int parameters_init(struct attitude_estimator_so3_param_handles *h) +{ + /* Filter gain parameters */ + h->Kp = param_find("SO3_COMP_KP"); + h->Ki = param_find("SO3_COMP_KI"); + + /* Attitude offset (WARNING: Do not change if you do not know what exactly this variable wil lchange) */ + h->roll_off = param_find("SO3_ROLL_OFFS"); + h->pitch_off = param_find("SO3_PITCH_OFFS"); + h->yaw_off = param_find("SO3_YAW_OFFS"); + + return OK; +} + +int parameters_update(const struct attitude_estimator_so3_param_handles *h, struct attitude_estimator_so3_params *p) +{ + /* Update filter gain */ + param_get(h->Kp, &(p->Kp)); + param_get(h->Ki, &(p->Ki)); + + /* Update attitude offset */ + param_get(h->roll_off, &(p->roll_off)); + param_get(h->pitch_off, &(p->pitch_off)); + param_get(h->yaw_off, &(p->yaw_off)); + + return OK; +} diff --git a/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.h b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.h new file mode 100755 index 000000000..dfb4cad05 --- /dev/null +++ b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.h @@ -0,0 +1,67 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * Author: Hyon Lim <limhyon@gmail.com> + * Anton Babushkin <anton.babushkin@me.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* + * @file attitude_estimator_so3_params.h + * + * Parameters for nonlinear complementary filters on the SO(3). + */ + +#include <systemlib/param/param.h> + +struct attitude_estimator_so3_params { + float Kp; + float Ki; + float roll_off; + float pitch_off; + float yaw_off; +}; + +struct attitude_estimator_so3_param_handles { + param_t Kp, Ki; + param_t roll_off, pitch_off, yaw_off; +}; + +/** + * Initialize all parameter handles and values + * + */ +int parameters_init(struct attitude_estimator_so3_param_handles *h); + +/** + * Update all parameters + * + */ +int parameters_update(const struct attitude_estimator_so3_param_handles *h, struct attitude_estimator_so3_params *p); diff --git a/src/modules/attitude_estimator_so3/module.mk b/src/modules/attitude_estimator_so3/module.mk new file mode 100644 index 000000000..e29bb16a6 --- /dev/null +++ b/src/modules/attitude_estimator_so3/module.mk @@ -0,0 +1,8 @@ +# +# Attitude estimator (Nonlinear SO(3) complementary Filter) +# + +MODULE_COMMAND = attitude_estimator_so3 + +SRCS = attitude_estimator_so3_main.cpp \ + attitude_estimator_so3_params.c diff --git a/src/modules/attitude_estimator_so3_comp/README b/src/modules/attitude_estimator_so3_comp/README deleted file mode 100644 index 79c50a531..000000000 --- a/src/modules/attitude_estimator_so3_comp/README +++ /dev/null @@ -1,5 +0,0 @@ -Synopsis - - nsh> attitude_estimator_so3_comp start -d /dev/ttyS1 -b 115200 - -Option -d is for debugging packet. See code for detailed packet structure. diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c deleted file mode 100755 index f962515df..000000000 --- a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> - * - * @file attitude_estimator_so3_comp_params.c - * - * Implementation of nonlinear complementary filters on the SO(3). - * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. - * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. - * - * Theory of nonlinear complementary filters on the SO(3) is based on [1]. - * Quaternion realization of [1] is based on [2]. - * Optmized quaternion update code is based on Sebastian Madgwick's implementation. - * - * References - * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 - * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 - */ - -#include "attitude_estimator_so3_comp_params.h" - -/* This is filter gain for nonlinear SO3 complementary filter */ -/* NOTE : How to tune the gain? First of all, stick with this default gain. And let the quad in stable place. - Log the steady state reponse of filter. If it is too slow, increase SO3_COMP_KP. - If you are flying from ground to high altitude in short amount of time, please increase SO3_COMP_KI which - will compensate gyro bias which depends on temperature and vibration of your vehicle */ -PARAM_DEFINE_FLOAT(SO3_COMP_KP, 1.0f); //! This parameter will give you about 15 seconds convergence time. - //! You can set this gain higher if you want more fast response. - //! But note that higher gain will give you also higher overshoot. -PARAM_DEFINE_FLOAT(SO3_COMP_KI, 0.05f); //! This gain will incorporate slow time-varying bias (e.g., temperature change) - //! This gain is depend on your vehicle status. - -/* offsets in roll, pitch and yaw of sensor plane and body */ -PARAM_DEFINE_FLOAT(ATT_ROLL_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_PITCH_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_YAW_OFFS, 0.0f); - -int parameters_init(struct attitude_estimator_so3_comp_param_handles *h) -{ - /* Filter gain parameters */ - h->Kp = param_find("SO3_COMP_KP"); - h->Ki = param_find("SO3_COMP_KI"); - - /* Attitude offset (WARNING: Do not change if you do not know what exactly this variable wil lchange) */ - h->roll_off = param_find("ATT_ROLL_OFFS"); - h->pitch_off = param_find("ATT_PITCH_OFFS"); - h->yaw_off = param_find("ATT_YAW_OFFS"); - - return OK; -} - -int parameters_update(const struct attitude_estimator_so3_comp_param_handles *h, struct attitude_estimator_so3_comp_params *p) -{ - /* Update filter gain */ - param_get(h->Kp, &(p->Kp)); - param_get(h->Ki, &(p->Ki)); - - /* Update attitude offset */ - param_get(h->roll_off, &(p->roll_off)); - param_get(h->pitch_off, &(p->pitch_off)); - param_get(h->yaw_off, &(p->yaw_off)); - - return OK; -} diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h deleted file mode 100755 index f00695630..000000000 --- a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> - * - * @file attitude_estimator_so3_comp_params.h - * - * Implementation of nonlinear complementary filters on the SO(3). - * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. - * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. - * - * Theory of nonlinear complementary filters on the SO(3) is based on [1]. - * Quaternion realization of [1] is based on [2]. - * Optmized quaternion update code is based on Sebastian Madgwick's implementation. - * - * References - * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 - * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 - */ - -#include <systemlib/param/param.h> - -struct attitude_estimator_so3_comp_params { - float Kp; - float Ki; - float roll_off; - float pitch_off; - float yaw_off; -}; - -struct attitude_estimator_so3_comp_param_handles { - param_t Kp, Ki; - param_t roll_off, pitch_off, yaw_off; -}; - -/** - * Initialize all parameter handles and values - * - */ -int parameters_init(struct attitude_estimator_so3_comp_param_handles *h); - -/** - * Update all parameters - * - */ -int parameters_update(const struct attitude_estimator_so3_comp_param_handles *h, struct attitude_estimator_so3_comp_params *p); diff --git a/src/modules/attitude_estimator_so3_comp/module.mk b/src/modules/attitude_estimator_so3_comp/module.mk deleted file mode 100644 index 92f43d920..000000000 --- a/src/modules/attitude_estimator_so3_comp/module.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# Attitude estimator (Nonlinear SO3 complementary Filter) -# - -MODULE_COMMAND = attitude_estimator_so3_comp - -SRCS = attitude_estimator_so3_comp_main.cpp \ - attitude_estimator_so3_comp_params.c diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index dfd4d2f73..3fc1d2c19 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -509,6 +509,21 @@ void handle_command(struct vehicle_status_s *status, const struct safety_s *safe } break; + /* Flight termination */ + case VEHICLE_CMD_DO_SET_SERVO: { //xxx: needs its own mavlink command + + if (armed->armed && cmd->param3 > 0.5) { //xxx: for safety only for now, param3 is unused by VEHICLE_CMD_DO_SET_SERVO + transition_result_t flighttermination_res = flighttermination_state_transition(status, FLIGHTTERMINATION_STATE_ON, control_mode); + result = VEHICLE_CMD_RESULT_ACCEPTED; + + } else { + /* reject parachute depoyment not armed */ + result = VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED; + } + + } + break; + default: break; } @@ -1174,6 +1189,16 @@ int commander_thread_main(int argc, char *argv[]) } } + /* Flight termination in manual mode if assisted switch is on easy position //xxx hack! */ + if (armed.armed && status.main_state == MAIN_STATE_MANUAL && sp_man.assisted_switch > STICK_ON_OFF_LIMIT) { + transition_result_t flighttermination_res = flighttermination_state_transition(&status, FLIGHTTERMINATION_STATE_ON, &control_mode); + if (flighttermination_res == TRANSITION_CHANGED) { + tune_positive(); + } + } else { + flighttermination_state_transition(&status, FLIGHTTERMINATION_STATE_OFF, &control_mode); + } + /* handle commands last, as the system needs to be updated to handle them */ orb_check(cmd_sub, &updated); @@ -1199,6 +1224,7 @@ int commander_thread_main(int argc, char *argv[]) bool arming_state_changed = check_arming_state_changed(); bool main_state_changed = check_main_state_changed(); bool navigation_state_changed = check_navigation_state_changed(); + bool flighttermination_state_changed = check_flighttermination_state_changed(); hrt_abstime t1 = hrt_absolute_time(); @@ -1598,8 +1624,8 @@ check_navigation_state_machine(struct vehicle_status_s *status, struct vehicle_c /* switch to failsafe mode */ bool manual_control_old = control_mode->flag_control_manual_enabled; - if (!status->condition_landed) { - /* in air: try to hold position */ + if (!status->condition_landed && status->condition_local_position_valid) { + /* in air: try to hold position if possible */ res = navigation_state_transition(status, NAVIGATION_STATE_VECTOR, control_mode); } else { @@ -1725,7 +1751,8 @@ void *commander_low_prio_loop(void *arg) /* ignore commands the high-prio loop handles */ if (cmd.command == VEHICLE_CMD_DO_SET_MODE || cmd.command == VEHICLE_CMD_COMPONENT_ARM_DISARM || - cmd.command == VEHICLE_CMD_NAV_TAKEOFF) + cmd.command == VEHICLE_CMD_NAV_TAKEOFF || + cmd.command == VEHICLE_CMD_DO_SET_SERVO) continue; /* only handle low-priority commands here */ diff --git a/src/modules/commander/state_machine_helper.cpp b/src/modules/commander/state_machine_helper.cpp index a50af7daf..ca3ec94b8 100644 --- a/src/modules/commander/state_machine_helper.cpp +++ b/src/modules/commander/state_machine_helper.cpp @@ -65,6 +65,7 @@ static const int ERROR = -1; static bool arming_state_changed = true; static bool main_state_changed = true; static bool navigation_state_changed = true; +static bool flighttermination_state_changed = true; transition_result_t arming_state_transition(struct vehicle_status_s *status, const struct safety_s *safety, @@ -451,6 +452,18 @@ check_navigation_state_changed() } } +bool +check_flighttermination_state_changed() +{ + if (flighttermination_state_changed) { + flighttermination_state_changed = false; + return true; + + } else { + return false; + } +} + void set_navigation_state_changed() { @@ -523,6 +536,44 @@ int hil_state_transition(hil_state_t new_state, int status_pub, struct vehicle_s } +/** +* Transition from one flightermination state to another +*/ +transition_result_t flighttermination_state_transition(struct vehicle_status_s *status, flighttermination_state_t new_flighttermination_state, struct vehicle_control_mode_s *control_mode) +{ + transition_result_t ret = TRANSITION_DENIED; + + /* only check transition if the new state is actually different from the current one */ + if (new_flighttermination_state == status->flighttermination_state) { + ret = TRANSITION_NOT_CHANGED; + + } else { + + switch (new_flighttermination_state) { + case FLIGHTTERMINATION_STATE_ON: + ret = TRANSITION_CHANGED; + status->flighttermination_state = FLIGHTTERMINATION_STATE_ON; + warnx("state machine helper: change to FLIGHTTERMINATION_STATE_ON"); + break; + case FLIGHTTERMINATION_STATE_OFF: + ret = TRANSITION_CHANGED; + status->flighttermination_state = FLIGHTTERMINATION_STATE_OFF; + break; + + default: + break; + } + + if (ret == TRANSITION_CHANGED) { + flighttermination_state_changed = true; + control_mode->flag_control_flighttermination_enabled = status->flighttermination_state == FLIGHTTERMINATION_STATE_ON; + } + } + + return ret; +} + + // /* // * Wrapper functions (to be used in the commander), all functions assume lock on current_status diff --git a/src/modules/commander/state_machine_helper.h b/src/modules/commander/state_machine_helper.h index 0bfdf36a8..e1ec9d4ad 100644 --- a/src/modules/commander/state_machine_helper.h +++ b/src/modules/commander/state_machine_helper.h @@ -70,8 +70,12 @@ bool check_main_state_changed(); transition_result_t navigation_state_transition(struct vehicle_status_s *status, navigation_state_t new_navigation_state, struct vehicle_control_mode_s *control_mode); +transition_result_t flighttermination_state_transition(struct vehicle_status_s *status, flighttermination_state_t new_flighttermination_state, struct vehicle_control_mode_s *control_mode); + bool check_navigation_state_changed(); +bool check_flighttermination_state_changed(); + void set_navigation_state_changed(); int hil_state_transition(hil_state_t new_state, int status_pub, struct vehicle_status_s *current_state, int control_mode_pub, struct vehicle_control_mode_s *current_control_mode, const int mavlink_fd); diff --git a/src/modules/controllib/uorb/blocks.hpp b/src/modules/controllib/uorb/blocks.hpp index 335439fb7..8cc0d77d4 100644 --- a/src/modules/controllib/uorb/blocks.hpp +++ b/src/modules/controllib/uorb/blocks.hpp @@ -43,7 +43,6 @@ #include <uORB/topics/vehicle_attitude.h> #include <uORB/topics/vehicle_rates_setpoint.h> #include <uORB/topics/vehicle_global_position.h> -#include <uORB/topics/vehicle_global_position_setpoint.h> #include <uORB/topics/mission_item_triplet.h> #include <uORB/topics/manual_control_setpoint.h> #include <uORB/topics/vehicle_status.h> diff --git a/src/modules/dataman/dataman.c b/src/modules/dataman/dataman.c index 874a47be7..dc2d6c312 100644 --- a/src/modules/dataman/dataman.c +++ b/src/modules/dataman/dataman.c @@ -111,7 +111,8 @@ static unsigned g_func_counts[dm_number_of_funcs]; static const unsigned g_per_item_max_index[DM_KEY_NUM_KEYS] = { DM_KEY_SAFE_POINTS_MAX, DM_KEY_FENCE_POINTS_MAX, - DM_KEY_WAYPOINTS_OFFBOARD_MAX, + DM_KEY_WAYPOINTS_OFFBOARD_0_MAX, + DM_KEY_WAYPOINTS_OFFBOARD_1_MAX, DM_KEY_WAYPOINTS_ONBOARD_MAX }; @@ -572,11 +573,13 @@ task_main(int argc, char *argv[]) g_task_fd = open(k_data_manager_device_path, O_RDWR | O_CREAT | O_BINARY); if (g_task_fd < 0) { warnx("Could not open data manager file %s", k_data_manager_device_path); + sem_post(&g_init_sema); return -1; } if (lseek(g_task_fd, max_offset, SEEK_SET) != max_offset) { close(g_task_fd); warnx("Could not seek data manager file %s", k_data_manager_device_path); + sem_post(&g_init_sema); return -1; } fsync(g_task_fd); @@ -720,7 +723,7 @@ dataman_main(int argc, char *argv[]) if (g_fd < 0) errx(1, "start failed"); - return 0; + exit(0); } if (g_fd < 0) @@ -733,6 +736,6 @@ dataman_main(int argc, char *argv[]) else usage(); - return 0; + exit(1); } diff --git a/src/modules/dataman/dataman.h b/src/modules/dataman/dataman.h index 2a781405a..a70638ccc 100644 --- a/src/modules/dataman/dataman.h +++ b/src/modules/dataman/dataman.h @@ -50,7 +50,8 @@ extern "C" { typedef enum { DM_KEY_SAFE_POINTS = 0, /* Safe points coordinates, safe point 0 is home point */ DM_KEY_FENCE_POINTS, /* Fence vertex coordinates */ - DM_KEY_WAYPOINTS_OFFBOARD, /* Mission way point coordinates sent over mavlink */ + DM_KEY_WAYPOINTS_OFFBOARD_0, /* Mission way point coordinates sent over mavlink */ + DM_KEY_WAYPOINTS_OFFBOARD_1, /* (alernate between 0 and 1) */ DM_KEY_WAYPOINTS_ONBOARD, /* Mission way point coordinates generated onboard */ DM_KEY_NUM_KEYS /* Total number of item types defined */ } dm_item_t; @@ -59,7 +60,8 @@ extern "C" { enum { DM_KEY_SAFE_POINTS_MAX = 8, DM_KEY_FENCE_POINTS_MAX = GEOFENCE_MAX_VERTICES, - DM_KEY_WAYPOINTS_OFFBOARD_MAX = NUM_MISSIONS_SUPPORTED, + DM_KEY_WAYPOINTS_OFFBOARD_0_MAX = NUM_MISSIONS_SUPPORTED, + DM_KEY_WAYPOINTS_OFFBOARD_1_MAX = NUM_MISSIONS_SUPPORTED, DM_KEY_WAYPOINTS_ONBOARD_MAX = NUM_MISSIONS_SUPPORTED }; diff --git a/src/modules/fw_att_control/fw_att_control_main.cpp b/src/modules/fw_att_control/fw_att_control_main.cpp index ff3f13306..26777f737 100644 --- a/src/modules/fw_att_control/fw_att_control_main.cpp +++ b/src/modules/fw_att_control/fw_att_control_main.cpp @@ -121,6 +121,7 @@ private: orb_advert_t _rate_sp_pub; /**< rate setpoint publication */ orb_advert_t _attitude_sp_pub; /**< attitude setpoint point */ orb_advert_t _actuators_0_pub; /**< actuator control group 0 setpoint */ + orb_advert_t _actuators_1_pub; /**< actuator control group 1 setpoint (Airframe) */ struct vehicle_attitude_s _att; /**< vehicle attitude */ struct accel_report _accel; /**< body frame accelerations */ @@ -128,7 +129,8 @@ private: struct manual_control_setpoint_s _manual; /**< r/c channel data */ struct airspeed_s _airspeed; /**< airspeed */ struct vehicle_control_mode_s _vcontrol_mode; /**< vehicle control mode */ - struct actuator_controls_s _actuators; /**< actuator control inputs */ + struct actuator_controls_s _actuators; /**< actuator control inputs */ + struct actuator_controls_s _actuators_airframe; /**< actuator control inputs */ struct vehicle_global_position_s _global_pos; /**< global position */ perf_counter_t _loop_perf; /**< loop performance counter */ @@ -286,6 +288,7 @@ FixedwingAttitudeControl::FixedwingAttitudeControl() : _rate_sp_pub(-1), _actuators_0_pub(-1), _attitude_sp_pub(-1), + _actuators_1_pub(-1), /* performance counters */ _loop_perf(perf_alloc(PC_ELAPSED, "fw att control")), @@ -294,14 +297,15 @@ FixedwingAttitudeControl::FixedwingAttitudeControl() : _airspeed_valid(false) { /* safely initialize structs */ - vehicle_attitude_s _att = {0}; - accel_report _accel = {0}; - vehicle_attitude_setpoint_s _att_sp = {0}; - manual_control_setpoint_s _manual = {0}; - airspeed_s _airspeed = {0}; - vehicle_control_mode_s _vcontrol_mode = {0}; - actuator_controls_s _actuators = {0}; - vehicle_global_position_s _global_pos = {0}; + _att = {0}; + _accel = {0}; + _att_sp = {0}; + _manual = {0}; + _airspeed = {0}; + _vcontrol_mode = {0}; + _actuators = {0}; + _actuators_airframe = {0}; + _global_pos = {0}; _parameter_handles.tconst = param_find("FW_ATT_TC"); @@ -625,6 +629,15 @@ FixedwingAttitudeControl::task_main() lock_integrator = true; } + /* Simple handling of failsafe: deploy parachute if failsafe is on */ + if (_vcontrol_mode.flag_control_flighttermination_enabled) { + _actuators_airframe.control[1] = 1.0f; +// warnx("_actuators_airframe.control[1] = 1.0f;"); + } else { + _actuators_airframe.control[1] = 0.0f; +// warnx("_actuators_airframe.control[1] = -1.0f;"); + } + /* decide if in stabilized or full manual control */ if (_vcontrol_mode.flag_control_attitude_enabled) { @@ -794,6 +807,7 @@ FixedwingAttitudeControl::task_main() /* lazily publish the setpoint only once available */ _actuators.timestamp = hrt_absolute_time(); + _actuators_airframe.timestamp = hrt_absolute_time(); if (_actuators_0_pub > 0) { /* publish the attitude setpoint */ @@ -804,6 +818,19 @@ FixedwingAttitudeControl::task_main() _actuators_0_pub = orb_advertise(ORB_ID(actuator_controls_0), &_actuators); } + if (_actuators_1_pub > 0) { + /* publish the attitude setpoint */ + orb_publish(ORB_ID(actuator_controls_1), _actuators_1_pub, &_actuators_airframe); +// warnx("%.2f %.2f %.2f %.2f %.2f %.2f %.2f %.2f", +// (double)_actuators_airframe.control[0], (double)_actuators_airframe.control[1], (double)_actuators_airframe.control[2], +// (double)_actuators_airframe.control[3], (double)_actuators_airframe.control[4], (double)_actuators_airframe.control[5], +// (double)_actuators_airframe.control[6], (double)_actuators_airframe.control[7]); + + } else { + /* advertise and publish */ + _actuators_1_pub = orb_advertise(ORB_ID(actuator_controls_1), &_actuators_airframe); + } + } perf_end(_loop_perf); diff --git a/src/modules/fw_att_control/fw_att_control_params.c b/src/modules/fw_att_control/fw_att_control_params.c index 240749fed..0b37f48ba 100644 --- a/src/modules/fw_att_control/fw_att_control_params.c +++ b/src/modules/fw_att_control/fw_att_control_params.c @@ -33,9 +33,9 @@ f * Copyright (c) 2013 PX4 Development Team. All rights reserved. ****************************************************************************/ /** - * @file fw_pos_control_l1_params.c + * @file fw_att_control_params.c * - * Parameters defined by the L1 position control task + * Parameters defined by the fixed-wing attitude control task * * @author Lorenz Meier <lm@inf.ethz.ch> */ diff --git a/src/modules/fw_pos_control_l1/fw_pos_control_l1_main.cpp b/src/modules/fw_pos_control_l1/fw_pos_control_l1_main.cpp index d60983bce..ae0f8c0ea 100644 --- a/src/modules/fw_pos_control_l1/fw_pos_control_l1_main.cpp +++ b/src/modules/fw_pos_control_l1/fw_pos_control_l1_main.cpp @@ -87,6 +87,7 @@ #include <ecl/l1/ecl_l1_pos_controller.h> #include <external_lgpl/tecs/tecs.h> +#include "landingslope.h" /** * L1 control app start / stop handling function @@ -168,6 +169,9 @@ private: bool land_motor_lim; bool land_onslope; + /* Landingslope object */ + Landingslope landingslope; + float flare_curve_alt_last; /* heading hold */ float target_bearing; @@ -308,11 +312,6 @@ private: void vehicle_setpoint_poll(); /** - * Get Altitude on the landing glide slope - */ - float getLandingSlopeAbsoluteAltitude(float wp_distance, float wp_altitude, float landing_slope_angle_rad, float horizontal_displacement); - - /** * Control position. */ bool control_position(const math::Vector2f &global_pos, const math::Vector2f &ground_speed, @@ -536,6 +535,9 @@ FixedwingPositionControl::parameters_update() return 1; } + /* Update the landing slope */ + landingslope.update(math::radians(_parameters.land_slope_angle), _parameters.land_flare_alt_relative, _parameters.land_thrust_lim_horizontal_distance, _parameters.land_H1_virt); + return OK; } @@ -707,11 +709,6 @@ FixedwingPositionControl::calculate_gndspeed_undershoot(const math::Vector2f &cu } } -float FixedwingPositionControl::getLandingSlopeAbsoluteAltitude(float wp_distance, float wp_altitude, float landing_slope_angle_rad, float horizontal_displacement) -{ - return (wp_distance - horizontal_displacement) * tanf(landing_slope_angle_rad) + wp_altitude; //flare_relative_alt is negative -} - bool FixedwingPositionControl::control_position(const math::Vector2f ¤t_position, const math::Vector2f &ground_speed, const struct mission_item_triplet_s &mission_item_triplet) @@ -854,20 +851,13 @@ FixedwingPositionControl::control_position(const math::Vector2f ¤t_positio float airspeed_land = 1.3f * _parameters.airspeed_min; float airspeed_approach = 1.3f * _parameters.airspeed_min; - float landing_slope_angle_rad = math::radians(_parameters.land_slope_angle); - float flare_relative_alt = _parameters.land_flare_alt_relative; - float motor_lim_horizontal_distance = _parameters.land_thrust_lim_horizontal_distance;//be generous here as we currently have to rely on the user input for the waypoint float L_wp_distance = get_distance_to_next_waypoint(prev_wp.getX(), prev_wp.getY(), curr_wp.getX(), curr_wp.getY()) * _parameters.land_slope_length; - float H1 = _parameters.land_H1_virt; - float H0 = flare_relative_alt + H1; - float d1 = flare_relative_alt/tanf(landing_slope_angle_rad); - float flare_constant = (H0 * d1)/flare_relative_alt;//-flare_length/(logf(H1/H0)); - float flare_length = - logf(H1/H0) * flare_constant;//d1+20.0f;//-logf(0.01f/flare_relative_alt); - float horizontal_slope_displacement = (flare_length - d1); - float L_altitude = getLandingSlopeAbsoluteAltitude(L_wp_distance, _mission_item_triplet.current.altitude, landing_slope_angle_rad, horizontal_slope_displacement); - float landing_slope_alt_desired = getLandingSlopeAbsoluteAltitude(wp_distance, _mission_item_triplet.current.altitude, landing_slope_angle_rad, horizontal_slope_displacement); + float L_altitude = landingslope.getLandingSlopeAbsoluteAltitude(L_wp_distance, _mission_item_triplet.current.altitude);//getLandingSlopeAbsoluteAltitude(L_wp_distance, _mission_item_triplet.current.altitude, landing_slope_angle_rad, horizontal_slope_displacement); + float landing_slope_alt_desired = landingslope.getLandingSlopeAbsoluteAltitude(wp_distance, _mission_item_triplet.current.altitude);//getLandingSlopeAbsoluteAltitude(wp_distance, _mission_item_triplet.current.altitude, landing_slope_angle_rad, horizontal_slope_displacement); + + - if ( (_global_pos.alt < _mission_item_triplet.current.altitude + flare_relative_alt) || land_noreturn_vertical) { //checking for land_noreturn to avoid unwanted climb out + if ( (_global_pos.alt < _mission_item_triplet.current.altitude + landingslope.flare_relative_alt()) || land_noreturn_vertical) { //checking for land_noreturn to avoid unwanted climb out /* land with minimal speed */ @@ -877,16 +867,16 @@ FixedwingPositionControl::control_position(const math::Vector2f ¤t_positio /* kill the throttle if param requests it */ throttle_max = _parameters.throttle_max; - if (wp_distance < motor_lim_horizontal_distance || land_motor_lim) { + if (wp_distance < landingslope.motor_lim_horizontal_distance() || land_motor_lim) { throttle_max = math::min(throttle_max, _parameters.throttle_land_max); if (!land_motor_lim) { land_motor_lim = true; - mavlink_log_info(_mavlink_fd, "[POSCTRL] Landing, limit throttle"); + mavlink_log_info(_mavlink_fd, "#audio: Landing, limiting throttle"); } } - float flare_curve_alt = _mission_item_triplet.current.altitude + H0 * expf(-math::max(0.0f, flare_length - wp_distance)/flare_constant) - H1; + float flare_curve_alt = _mission_item_triplet.current.altitude + landingslope.H0() * expf(-math::max(0.0f, landingslope.flare_length() - wp_distance)/landingslope.flare_constant()) - landingslope.H1_virt(); /* avoid climbout */ if (flare_curve_alt_last < flare_curve_alt && land_noreturn_vertical || land_stayonground) @@ -902,7 +892,7 @@ FixedwingPositionControl::control_position(const math::Vector2f ¤t_positio flare_angle_rad, math::radians(15.0f)); if (!land_noreturn_vertical) { - mavlink_log_info(_mavlink_fd, "[POSCTRL] Landing, flare"); + mavlink_log_info(_mavlink_fd, "#audio: Landing, flaring"); land_noreturn_vertical = true; } //warnx("Landing: flare, _global_pos.alt %.1f, flare_curve_alt %.1f, flare_curve_alt_last %.1f, flare_length %.1f, wp_distance %.1f", _global_pos.alt, flare_curve_alt, flare_curve_alt_last, flare_length, wp_distance); @@ -921,7 +911,7 @@ FixedwingPositionControl::control_position(const math::Vector2f ¤t_positio if (!land_onslope) { - mavlink_log_info(_mavlink_fd, "[POSCTRL] Landing, on slope"); + mavlink_log_info(_mavlink_fd, "#audio: Landing, on slope"); land_onslope = true; } @@ -961,7 +951,7 @@ FixedwingPositionControl::control_position(const math::Vector2f ¤t_positio /* enforce a minimum of 10 degrees pitch up on takeoff, or take parameter */ _tecs.update_pitch_throttle(_R_nb, _att.pitch, _global_pos.alt, _mission_item_triplet.current.altitude, calculate_target_airspeed(1.3f * _parameters.airspeed_min), _airspeed.indicated_airspeed_m_s, eas2tas, - true, math::max(math::radians(mission_item_triplet.current.radius), math::radians(10.0f)), + true, math::max(math::radians(mission_item_triplet.current.pitch_min), math::radians(10.0f)), _parameters.throttle_min, _parameters.throttle_max, _parameters.throttle_cruise, math::radians(_parameters.pitch_limit_min), math::radians(_parameters.pitch_limit_max)); diff --git a/src/modules/fw_pos_control_l1/landingslope.cpp b/src/modules/fw_pos_control_l1/landingslope.cpp new file mode 100644 index 000000000..ecf51b740 --- /dev/null +++ b/src/modules/fw_pos_control_l1/landingslope.cpp @@ -0,0 +1,78 @@ +/**************************************************************************** + * + * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. + * Author: @author Lorenz Meier <lm@inf.ethz.ch> + * @author Thomas Gubler <thomasgubler@student.ethz.ch> + * @author Julian Oes <joes@student.ethz.ch> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* + * @file: landingslope.cpp + * + * @author: Thomas Gubler <thomasgubler@gmail.com> + */ + +#include "landingslope.h" + +#include <nuttx/config.h> +#include <stdlib.h> +#include <errno.h> +#include <math.h> +#include <unistd.h> + +void Landingslope::update(float landing_slope_angle_rad, + float flare_relative_alt, + float motor_lim_horizontal_distance, + float H1_virt) +{ + + _landing_slope_angle_rad = landing_slope_angle_rad; + _flare_relative_alt = flare_relative_alt; + _motor_lim_horizontal_distance = motor_lim_horizontal_distance; + _H1_virt = H1_virt; + + calculateSlopeValues(); +} + +void Landingslope::calculateSlopeValues() +{ + _H0 = _flare_relative_alt + _H1_virt; + _d1 = _flare_relative_alt/tanf(_landing_slope_angle_rad); + _flare_constant = (_H0 * _d1)/_flare_relative_alt; + _flare_length = - logf(_H1_virt/_H0) * _flare_constant; + _horizontal_slope_displacement = (_flare_length - _d1); +} + +float Landingslope::getLandingSlopeAbsoluteAltitude(float wp_distance, float wp_altitude) +{ + return (wp_distance - _horizontal_slope_displacement) * tanf(_landing_slope_angle_rad) + wp_altitude; //flare_relative_alt is negative +} + diff --git a/src/modules/uORB/topics/vehicle_global_position_setpoint.h b/src/modules/fw_pos_control_l1/landingslope.h index a56434d3b..f855b796f 100644 --- a/src/modules/uORB/topics/vehicle_global_position_setpoint.h +++ b/src/modules/fw_pos_control_l1/landingslope.h @@ -1,9 +1,9 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: @author Thomas Gubler <thomasgubler@student.ethz.ch> + * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. + * Author: @author Lorenz Meier <lm@inf.ethz.ch> + * @author Thomas Gubler <thomasgubler@student.ethz.ch> * @author Julian Oes <joes@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -34,53 +34,53 @@ * ****************************************************************************/ -/** - * @file vehicle_global_position_setpoint.h - * Definition of the global WGS84 position setpoint uORB topic. +/* + * @file: landingslope.h + * + * @author: Thomas Gubler <thomasgubler@gmail.com> */ -#ifndef TOPIC_VEHICLE_GLOBAL_POSITION_SETPOINT_H_ -#define TOPIC_VEHICLE_GLOBAL_POSITION_SETPOINT_H_ +#ifndef LANDINGSLOPE_H_ +#define LANDINGSLOPE_H_ -#include <stdint.h> -#include <stdbool.h> -#include "../uORB.h" -#include "mission.h" +class Landingslope +{ +private: + float _landing_slope_angle_rad; + float _flare_relative_alt; + float _motor_lim_horizontal_distance; + float _H1_virt; + float _H0; + float _d1; + float _flare_constant; + float _flare_length; + float _horizontal_slope_displacement; -/** - * @addtogroup topics - * @{ - */ + void calculateSlopeValues(); -/** - * Global position setpoint in WGS84 coordinates. - * - * This is the position the MAV is heading towards. If it of type loiter, - * the MAV is circling around it with the given loiter radius in meters. - */ -struct vehicle_global_position_setpoint_s -{ - bool altitude_is_relative; /**< true if altitude is relative from start point */ - int32_t lat; /**< latitude in degrees * 1E7 */ - int32_t lon; /**< longitude in degrees * 1E7 */ - float altitude; /**< altitude in meters */ - float yaw; /**< in radians NED -PI..+PI */ - float loiter_radius; /**< loiter radius in meters, 0 for a VTOL to hover */ - int8_t loiter_direction; /**< 1: positive / clockwise, -1, negative. */ - enum NAV_CMD nav_cmd; /**< true if loitering is enabled */ - float param1; - float param2; - float param3; - float param4; - float turn_distance_xy; /**< The distance on the plane which will mark this as reached */ - float turn_distance_z; /**< The distance in Z direction which will mark this as reached */ -}; +public: + Landingslope() {} + ~Landingslope() {} -/** - * @} - */ + float getLandingSlopeAbsoluteAltitude(float wp_distance, float wp_altitude); + + void update(float landing_slope_angle_rad, + float flare_relative_alt, + float motor_lim_horizontal_distance, + float H1_virt); + + + inline float landing_slope_angle_rad() {return _landing_slope_angle_rad;} + inline float flare_relative_alt() {return _flare_relative_alt;} + inline float motor_lim_horizontal_distance() {return _motor_lim_horizontal_distance;} + inline float H1_virt() {return _H1_virt;} + inline float H0() {return _H0;} + inline float d1() {return _d1;} + inline float flare_constant() {return _flare_constant;} + inline float flare_length() {return _flare_length;} + inline float horizontal_slope_displacement() {return _horizontal_slope_displacement;} + +}; -/* register this as object request broker structure */ -ORB_DECLARE(vehicle_global_position_setpoint); -#endif +#endif /* LANDINGSLOPE_H_ */ diff --git a/src/modules/fw_pos_control_l1/module.mk b/src/modules/fw_pos_control_l1/module.mk index b00b9aa5a..cf419ec7e 100644 --- a/src/modules/fw_pos_control_l1/module.mk +++ b/src/modules/fw_pos_control_l1/module.mk @@ -38,4 +38,5 @@ MODULE_COMMAND = fw_pos_control_l1 SRCS = fw_pos_control_l1_main.cpp \ - fw_pos_control_l1_params.c + fw_pos_control_l1_params.c \ + landingslope.cpp diff --git a/src/modules/mavlink/mavlink_receiver.cpp b/src/modules/mavlink/mavlink_receiver.cpp index bfccd5fb0..7b6fad658 100644 --- a/src/modules/mavlink/mavlink_receiver.cpp +++ b/src/modules/mavlink/mavlink_receiver.cpp @@ -382,16 +382,15 @@ handle_message(mavlink_message_t *msg) /* hil gyro */ static const float mrad2rad = 1.0e-3f; - hil_sensors.gyro_counter = hil_counter; hil_sensors.gyro_raw[0] = imu.xgyro / mrad2rad; hil_sensors.gyro_raw[1] = imu.ygyro / mrad2rad; hil_sensors.gyro_raw[2] = imu.zgyro / mrad2rad; hil_sensors.gyro_rad_s[0] = imu.xgyro; hil_sensors.gyro_rad_s[1] = imu.ygyro; hil_sensors.gyro_rad_s[2] = imu.zgyro; + hil_sensors.gyro_counter = hil_counter; /* accelerometer */ - hil_sensors.accelerometer_counter = hil_counter; static const float mg2ms2 = 9.8f / 1000.0f; hil_sensors.accelerometer_raw[0] = imu.xacc / mg2ms2; hil_sensors.accelerometer_raw[1] = imu.yacc / mg2ms2; @@ -401,6 +400,7 @@ handle_message(mavlink_message_t *msg) hil_sensors.accelerometer_m_s2[2] = imu.zacc; hil_sensors.accelerometer_mode = 0; // TODO what is this? hil_sensors.accelerometer_range_m_s2 = 32.7f; // int16 + hil_sensors.accelerometer_counter = hil_counter; /* adc */ hil_sensors.adc_voltage_v[0] = 0.0f; @@ -409,7 +409,6 @@ handle_message(mavlink_message_t *msg) /* magnetometer */ float mga2ga = 1.0e-3f; - hil_sensors.magnetometer_counter = hil_counter; hil_sensors.magnetometer_raw[0] = imu.xmag / mga2ga; hil_sensors.magnetometer_raw[1] = imu.ymag / mga2ga; hil_sensors.magnetometer_raw[2] = imu.zmag / mga2ga; @@ -419,15 +418,13 @@ handle_message(mavlink_message_t *msg) hil_sensors.magnetometer_range_ga = 32.7f; // int16 hil_sensors.magnetometer_mode = 0; // TODO what is this hil_sensors.magnetometer_cuttoff_freq_hz = 50.0f; + hil_sensors.magnetometer_counter = hil_counter; /* baro */ hil_sensors.baro_pres_mbar = imu.abs_pressure; hil_sensors.baro_alt_meter = imu.pressure_alt; hil_sensors.baro_temp_celcius = imu.temperature; - - hil_sensors.gyro_counter = hil_counter; - hil_sensors.magnetometer_counter = hil_counter; - hil_sensors.accelerometer_counter = hil_counter; + hil_sensors.baro_counter = hil_counter; /* differential pressure */ hil_sensors.differential_pressure_pa = imu.diff_pressure * 1e2f; //from hPa to Pa diff --git a/src/modules/mavlink/missionlib.c b/src/modules/mavlink/missionlib.c index a7f9a6acf..318dcf08c 100644 --- a/src/modules/mavlink/missionlib.c +++ b/src/modules/mavlink/missionlib.c @@ -73,11 +73,15 @@ #include "waypoints.h" #include "mavlink_parameters.h" + + static uint8_t missionlib_msg_buf[MAVLINK_MAX_PACKET_LEN]; static uint64_t loiter_start_time; +#if 0 static bool set_special_fields(float param1, float param2, float param3, float param4, uint16_t command, struct vehicle_global_position_setpoint_s *sp); +#endif int mavlink_missionlib_send_message(mavlink_message_t *msg) @@ -88,6 +92,8 @@ mavlink_missionlib_send_message(mavlink_message_t *msg) return 0; } + + int mavlink_missionlib_send_gcs_string(const char *string) { @@ -127,6 +133,7 @@ uint64_t mavlink_missionlib_get_system_timestamp() return hrt_absolute_time(); } +#if 0 /** * Set special vehicle setpoint fields based on current mission item. * @@ -301,7 +308,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, // sp.lon = wpm->waypoints[last_setpoint_index].y * 1e7f; // sp.altitude = wpm->waypoints[last_setpoint_index].z; // sp.altitude_is_relative = false; - // sp.yaw = (wpm->waypoints[last_setpoint_index].param4 / 180.0f) * M_PI_F - M_PI_F; + // sp.yaw = _wrap_pi(wpm->waypoints[last_setpoint_index].param4 / 180.0f * M_PI_F); // set_special_fields(wpm->waypoints[last_setpoint_index].param1, // wpm->waypoints[last_setpoint_index].param2, // wpm->waypoints[last_setpoint_index].param3, @@ -317,7 +324,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, // sp.lon = wpm->waypoints[next_setpoint_index].y * 1e7f; // sp.altitude = wpm->waypoints[next_setpoint_index].z; // sp.altitude_is_relative = false; - // sp.yaw = (wpm->waypoints[next_setpoint_index].param4 / 180.0f) * M_PI_F - M_PI_F; + // sp.yaw = _wrap_pi(wpm->waypoints[next_setpoint_index].param4 / 180.0f * M_PI_F); // set_special_fields(wpm->waypoints[next_setpoint_index].param1, // wpm->waypoints[next_setpoint_index].param2, // wpm->waypoints[next_setpoint_index].param3, @@ -343,7 +350,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, sp.lon = param6_lon_y * 1e7f; sp.altitude = param7_alt_z; sp.altitude_is_relative = true; - sp.yaw = (param4 / 180.0f) * M_PI_F - M_PI_F; + sp.yaw = _wrap_pi(param4 / 180.0f * M_PI_F); set_special_fields(param1, param2, param3, param4, command, &sp); /* Initialize publication if necessary */ @@ -364,7 +371,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, sp.x = param5_lat_x; sp.y = param6_lon_y; sp.z = param7_alt_z; - sp.yaw = (param4 / 180.0f) * M_PI_F - M_PI_F; + sp.yaw = _wrap_pi(param4 / 180.0f * M_PI_F); /* Initialize publication if necessary */ if (local_position_setpoint_pub < 0) { @@ -388,3 +395,5 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, printf("%s\n", buf); //printf("[mavlink mp] new setpoint\n");//: frame: %d, lat: %d, lon: %d, alt: %d, yaw: %d\n", frame, param5_lat_x*1000, param6_lon_y*1000, param7_alt_z*1000, param4*1000); } + +#endif
\ No newline at end of file diff --git a/src/modules/mavlink/orb_listener.c b/src/modules/mavlink/orb_listener.c index 634586fdb..de902f3da 100644 --- a/src/modules/mavlink/orb_listener.c +++ b/src/modules/mavlink/orb_listener.c @@ -54,6 +54,7 @@ #include <sys/prctl.h> #include <stdlib.h> #include <poll.h> +#include <lib/geo/geo.h> #include <mavlink/mavlink_log.h> @@ -72,7 +73,6 @@ struct vehicle_status_s v_status; struct rc_channels_s rc; struct rc_input_values rc_raw; struct actuator_armed_s armed; -struct actuator_controls_effective_s actuators_effective_0; struct actuator_controls_s actuators_0; struct vehicle_attitude_s att; struct airspeed_s airspeed; @@ -119,7 +119,6 @@ static void l_attitude_setpoint(const struct listener *l); static void l_actuator_outputs(const struct listener *l); static void l_actuator_armed(const struct listener *l); static void l_manual_control_setpoint(const struct listener *l); -static void l_vehicle_attitude_controls_effective(const struct listener *l); static void l_vehicle_attitude_controls(const struct listener *l); static void l_debug_key_value(const struct listener *l); static void l_optical_flow(const struct listener *l); @@ -137,7 +136,7 @@ static const struct listener listeners[] = { {l_input_rc, &mavlink_subs.input_rc_sub, 0}, {l_global_position, &mavlink_subs.global_pos_sub, 0}, {l_local_position, &mavlink_subs.local_pos_sub, 0}, - {l_global_position_setpoint, &mavlink_subs.spg_sub, 0}, + {l_global_position_setpoint, &mavlink_subs.triplet_sub, 0}, {l_local_position_setpoint, &mavlink_subs.spl_sub, 0}, {l_attitude_setpoint, &mavlink_subs.spa_sub, 0}, {l_actuator_outputs, &mavlink_subs.act_0_sub, 0}, @@ -147,7 +146,6 @@ static const struct listener listeners[] = { {l_actuator_armed, &mavlink_subs.armed_sub, 0}, {l_manual_control_setpoint, &mavlink_subs.man_control_sp_sub, 0}, {l_vehicle_attitude_controls, &mavlink_subs.actuators_sub, 0}, - {l_vehicle_attitude_controls_effective, &mavlink_subs.actuators_effective_sub, 0}, {l_debug_key_value, &mavlink_subs.debug_key_value, 0}, {l_optical_flow, &mavlink_subs.optical_flow, 0}, {l_vehicle_rates_setpoint, &mavlink_subs.rates_setpoint_sub, 0}, @@ -242,16 +240,29 @@ l_vehicle_attitude(const struct listener *l) att.rollspeed, att.pitchspeed, att.yawspeed); - + /* limit VFR message rate to 10Hz */ hrt_abstime t = hrt_absolute_time(); if (t >= last_sent_vfr + 100000) { last_sent_vfr = t; float groundspeed = sqrtf(global_pos.vx * global_pos.vx + global_pos.vy * global_pos.vy); - uint16_t heading = (att.yaw + M_PI_F) / M_PI_F * 180.0f; - float throttle = actuators_effective_0.control_effective[3] * (UINT16_MAX - 1); + uint16_t heading = _wrap_2pi(att.yaw) * M_RAD_TO_DEG_F; + float throttle = armed.armed ? actuators_0.control[3] * 100.0f : 0.0f; mavlink_msg_vfr_hud_send(MAVLINK_COMM_0, airspeed.true_airspeed_m_s, groundspeed, heading, throttle, global_pos.alt, -global_pos.vz); } + + /* send quaternion values if it exists */ + if(att.q_valid) { + mavlink_msg_attitude_quaternion_send(MAVLINK_COMM_0, + last_sensor_timestamp / 1000, + att.q[0], + att.q[1], + att.q[2], + att.q[3], + att.rollspeed, + att.pitchspeed, + att.yawspeed); + } } attitude_counter++; @@ -266,13 +277,7 @@ l_vehicle_gps_position(const struct listener *l) orb_copy(ORB_ID(vehicle_gps_position), mavlink_subs.gps_sub, &gps); /* GPS COG is 0..2PI in degrees * 1e2 */ - float cog_deg = gps.cog_rad; - - if (cog_deg > M_PI_F) - cog_deg -= 2.0f * M_PI_F; - - cog_deg *= M_RAD_TO_DEG_F; - + float cog_deg = _wrap_2pi(gps.cog_rad) * M_RAD_TO_DEG_F; /* GPS position */ mavlink_msg_gps_raw_int_send(MAVLINK_COMM_0, @@ -365,28 +370,16 @@ l_global_position(const struct listener *l) /* copy global position data into local buffer */ orb_copy(ORB_ID(vehicle_global_position), mavlink_subs.global_pos_sub, &global_pos); - uint64_t timestamp = global_pos.timestamp; - int32_t lat = global_pos.lat; - int32_t lon = global_pos.lon; - int32_t alt = (int32_t)(global_pos.alt * 1000); - int32_t relative_alt = (int32_t)(global_pos.relative_alt * 1000.0f); - int16_t vx = (int16_t)(global_pos.vx * 100.0f); - int16_t vy = (int16_t)(global_pos.vy * 100.0f); - int16_t vz = (int16_t)(global_pos.vz * 100.0f); - - /* heading in degrees * 10, from 0 to 36.000) */ - uint16_t hdg = (global_pos.yaw / M_PI_F) * (180.0f * 10.0f) + (180.0f * 10.0f); - mavlink_msg_global_position_int_send(MAVLINK_COMM_0, - timestamp / 1000, - lat, - lon, - alt, - relative_alt, - vx, - vy, - vz, - hdg); + global_pos.timestamp / 1000, + global_pos.lat, + global_pos.lon, + global_pos.alt * 1000.0f, + global_pos.relative_alt * 1000.0f, + global_pos.vx * 100.0f, + global_pos.vy * 100.0f, + global_pos.vz * 100.0f, + _wrap_2pi(global_pos.yaw) * M_RAD_TO_DEG_F * 100.0f); } void @@ -409,23 +402,24 @@ l_local_position(const struct listener *l) void l_global_position_setpoint(const struct listener *l) { - struct vehicle_global_position_setpoint_s global_sp; - - /* copy local position data into local buffer */ - orb_copy(ORB_ID(vehicle_global_position_setpoint), mavlink_subs.spg_sub, &global_sp); + struct mission_item_triplet_s triplet; + orb_copy(ORB_ID(mission_item_triplet), mavlink_subs.triplet_sub, &triplet); uint8_t coordinate_frame = MAV_FRAME_GLOBAL; + + if (!triplet.current_valid) + return; - if (global_sp.altitude_is_relative) + if (triplet.current.altitude_is_relative) coordinate_frame = MAV_FRAME_GLOBAL_RELATIVE_ALT; if (gcs_link) mavlink_msg_global_position_setpoint_int_send(MAVLINK_COMM_0, coordinate_frame, - global_sp.lat, - global_sp.lon, - global_sp.altitude, - global_sp.yaw); + (int32_t)(triplet.current.lat * 1e7f), + (int32_t)(triplet.current.lon * 1e7f), + (int32_t)(triplet.current.altitude * 1e3f), + (int16_t)(triplet.current.yaw * M_RAD_TO_DEG_F * 1e2f)); } void @@ -506,8 +500,8 @@ l_actuator_outputs(const struct listener *l) act_outputs.output[6], act_outputs.output[7]); - /* only send in HIL mode */ - if (mavlink_hil_enabled && armed.armed && l->arg == 0) { + /* only send in HIL mode and only send first group for HIL */ + if (mavlink_hil_enabled && armed.armed && ids[l->arg] == ORB_ID(actuator_outputs_0)) { /* translate the current syste state to mavlink state and mode */ uint8_t mavlink_state = 0; @@ -604,32 +598,6 @@ l_manual_control_setpoint(const struct listener *l) } void -l_vehicle_attitude_controls_effective(const struct listener *l) -{ - orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, mavlink_subs.actuators_effective_sub, &actuators_effective_0); - - if (gcs_link) { - /* send, add spaces so that string buffer is at least 10 chars long */ - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl0 ", - actuators_effective_0.control_effective[0]); - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl1 ", - actuators_effective_0.control_effective[1]); - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl2 ", - actuators_effective_0.control_effective[2]); - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl3 ", - actuators_effective_0.control_effective[3]); - } -} - -void l_vehicle_attitude_controls(const struct listener *l) { orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, mavlink_subs.actuators_sub, &actuators_0); @@ -803,9 +771,9 @@ uorb_receive_start(void) orb_set_interval(mavlink_subs.local_pos_sub, 1000); /* 1Hz active updates */ /* --- GLOBAL SETPOINT VALUE --- */ - mavlink_subs.spg_sub = orb_subscribe(ORB_ID(vehicle_global_position_setpoint)); - orb_set_interval(mavlink_subs.spg_sub, 2000); /* 0.5 Hz updates */ - + mavlink_subs.triplet_sub = orb_subscribe(ORB_ID(mission_item_triplet)); + orb_set_interval(mavlink_subs.triplet_sub, 2000); /* 0.5 Hz updates */ + /* --- LOCAL SETPOINT VALUE --- */ mavlink_subs.spl_sub = orb_subscribe(ORB_ID(vehicle_local_position_setpoint)); orb_set_interval(mavlink_subs.spl_sub, 2000); /* 0.5 Hz updates */ @@ -839,9 +807,6 @@ uorb_receive_start(void) orb_set_interval(mavlink_subs.man_control_sp_sub, 100); /* 10Hz updates */ /* --- ACTUATOR CONTROL VALUE --- */ - mavlink_subs.actuators_effective_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE); - orb_set_interval(mavlink_subs.actuators_effective_sub, 100); /* 10Hz updates */ - mavlink_subs.actuators_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS); orb_set_interval(mavlink_subs.actuators_sub, 100); /* 10Hz updates */ diff --git a/src/modules/mavlink/orb_topics.h b/src/modules/mavlink/orb_topics.h index 2cba25338..7d24b8f93 100644 --- a/src/modules/mavlink/orb_topics.h +++ b/src/modules/mavlink/orb_topics.h @@ -50,8 +50,8 @@ #include <uORB/topics/offboard_control_setpoint.h> #include <uORB/topics/vehicle_command.h> #include <uORB/topics/vehicle_local_position_setpoint.h> +#include <uORB/topics/mission_item_triplet.h> #include <uORB/topics/vehicle_vicon_position.h> -#include <uORB/topics/vehicle_global_position_setpoint.h> #include <uORB/topics/mission_item_triplet.h> #include <uORB/topics/vehicle_attitude_setpoint.h> #include <uORB/topics/vehicle_rates_setpoint.h> @@ -86,7 +86,7 @@ struct mavlink_subscriptions { int local_pos_sub; int spa_sub; int spl_sub; - int spg_sub; + int triplet_sub; int debug_key_value; int input_rc_sub; int optical_flow; diff --git a/src/modules/mavlink/waypoints.c b/src/modules/mavlink/waypoints.c index 52a580d5b..741ea8aa4 100644 --- a/src/modules/mavlink/waypoints.c +++ b/src/modules/mavlink/waypoints.c @@ -103,12 +103,21 @@ int map_mavlink_mission_item_to_mission_item(const mavlink_mission_item_t *mavli return MAV_MISSION_ERROR; } + switch (mavlink_mission_item->command) { + case MAV_CMD_NAV_TAKEOFF: + mission_item->pitch_min = mavlink_mission_item->param2; + break; + default: + mission_item->radius = mavlink_mission_item->param2; + break; + } + mission_item->yaw = _wrap_pi(mavlink_mission_item->param4*M_DEG_TO_RAD_F); mission_item->loiter_radius = fabsf(mavlink_mission_item->param3); mission_item->loiter_direction = (mavlink_mission_item->param3 > 0) ? 1 : -1; /* 1 if positive CW, -1 if negative CCW */ mission_item->nav_cmd = mavlink_mission_item->command; - mission_item->radius = mavlink_mission_item->param1; - mission_item->time_inside = mavlink_mission_item->param2 / 1e3f; /* from milliseconds to seconds */ + + mission_item->time_inside = mavlink_mission_item->param1 / 1e3f; /* from milliseconds to seconds */ mission_item->autocontinue = mavlink_mission_item->autocontinue; mission_item->index = mavlink_mission_item->seq; mission_item->origin = ORIGIN_MAVLINK; @@ -124,6 +133,15 @@ int map_mission_item_to_mavlink_mission_item(const struct mission_item_s *missio mavlink_mission_item->frame = MAV_FRAME_GLOBAL_RELATIVE_ALT; } + switch (mission_item->nav_cmd) { + case NAV_CMD_TAKEOFF: + mavlink_mission_item->param2 = mission_item->pitch_min; + break; + default: + mavlink_mission_item->param2 = mission_item->radius; + break; + } + mavlink_mission_item->x = (float)mission_item->lat; mavlink_mission_item->y = (float)mission_item->lon; mavlink_mission_item->z = mission_item->altitude; @@ -131,8 +149,7 @@ int map_mission_item_to_mavlink_mission_item(const struct mission_item_s *missio mavlink_mission_item->param4 = mission_item->yaw*M_RAD_TO_DEG_F; mavlink_mission_item->param3 = mission_item->loiter_radius*(float)mission_item->loiter_direction; mavlink_mission_item->command = mission_item->nav_cmd; - mavlink_mission_item->param1 = mission_item->radius; - mavlink_mission_item->param2 = mission_item->time_inside * 1e3f; /* from seconds to milliseconds */ + mavlink_mission_item->param1 = mission_item->time_inside * 1e3f; /* from seconds to milliseconds */ mavlink_mission_item->autocontinue = mission_item->autocontinue; mavlink_mission_item->seq = mission_item->index; @@ -152,6 +169,8 @@ void mavlink_wpm_init(mavlink_wpm_storage *state) state->timestamp_lastaction = 0; // state->timestamp_last_send_setpoint = 0; state->timeout = MAVLINK_WPM_PROTOCOL_TIMEOUT_DEFAULT; + + state->current_dataman_id = 0; // state->delay_setpoint = MAVLINK_WPM_SETPOINT_DELAY_DEFAULT; // state->idle = false; ///< indicates if the system is following the waypoints or is waiting // state->current_active_wp_id = -1; ///< id of current waypoint @@ -595,6 +614,7 @@ void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehi // wpm->yaw_reached = false; // wpm->pos_reached = false; + mission.current_index = wpc.seq; publish_mission(); @@ -701,7 +721,15 @@ void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehi struct mission_item_s mission_item; ssize_t len = sizeof(struct mission_item_s); - if (dm_read(DM_KEY_WAYPOINTS_OFFBOARD, wpr.seq, &mission_item, len) == len) { + dm_item_t dm_current; + + if (wpm->current_dataman_id == 0) { + dm_current = DM_KEY_WAYPOINTS_OFFBOARD_0; + } else { + dm_current = DM_KEY_WAYPOINTS_OFFBOARD_1; + } + + if (dm_read(dm_current, wpr.seq, &mission_item, len) == len) { if (mission.current_index == wpr.seq) { wp.current = true; @@ -838,10 +866,6 @@ void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehi if (wpc.count > NUM_MISSIONS_SUPPORTED) { warnx("Too many waypoints: %d, supported: %d", wpc.count, NUM_MISSIONS_SUPPORTED); - } else { - /* set count to 0 while copying */ - mission.count = 0; - publish_mission(); } #ifdef MAVLINK_WPM_NO_PRINTF @@ -975,7 +999,17 @@ void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehi size_t len = sizeof(struct mission_item_s); - if (dm_write(DM_KEY_WAYPOINTS_OFFBOARD, wp.seq, DM_PERSIST_IN_FLIGHT_RESET, &mission_item, len) != len) { + dm_item_t dm_next; + + if (wpm->current_dataman_id == 0) { + dm_next = DM_KEY_WAYPOINTS_OFFBOARD_1; + mission.dataman_id = 1; + } else { + dm_next = DM_KEY_WAYPOINTS_OFFBOARD_0; + mission.dataman_id = 0; + } + + if (dm_write(dm_next, wp.seq, DM_PERSIST_IN_FLIGHT_RESET, &mission_item, len) != len) { mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, MAV_MISSION_ERROR); wpm->current_state = MAVLINK_WPM_STATE_IDLE; break; @@ -1021,6 +1055,7 @@ void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehi publish_mission(); + wpm->current_dataman_id = mission.dataman_id; wpm->size = wpm->current_count; //get the new current waypoint @@ -1115,9 +1150,11 @@ void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehi // wpm->pos_reached = false; /* prepare mission topic */ + mission.dataman_id = -1; mission.count = 0; + mission.current_index = -1; - if (dm_clear(DM_KEY_WAYPOINTS_OFFBOARD) == OK) { + if (dm_clear(DM_KEY_WAYPOINTS_OFFBOARD_0) == OK && dm_clear(DM_KEY_WAYPOINTS_OFFBOARD_1) == OK) { mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, MAV_MISSION_ACCEPTED); } else { mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, MAV_MISSION_ERROR); diff --git a/src/modules/mavlink/waypoints.h b/src/modules/mavlink/waypoints.h index fc68285e9..801bc0bcf 100644 --- a/src/modules/mavlink/waypoints.h +++ b/src/modules/mavlink/waypoints.h @@ -110,6 +110,7 @@ struct mavlink_wpm_storage { // uint64_t timestamp_firstinside_orbit; // uint64_t timestamp_lastoutside_orbit; uint32_t timeout; + int current_dataman_id; // uint32_t delay_setpoint; // float accept_range_yaw; // float accept_range_distance; diff --git a/src/modules/mavlink_onboard/orb_topics.h b/src/modules/mavlink_onboard/orb_topics.h index 1b49c9ce4..86bfa26f2 100644 --- a/src/modules/mavlink_onboard/orb_topics.h +++ b/src/modules/mavlink_onboard/orb_topics.h @@ -50,7 +50,7 @@ #include <uORB/topics/vehicle_command.h> #include <uORB/topics/vehicle_local_position_setpoint.h> #include <uORB/topics/vehicle_vicon_position.h> -#include <uORB/topics/vehicle_global_position_setpoint.h> +#include <uORB/topics/mission_item_triplet.h> #include <uORB/topics/vehicle_attitude_setpoint.h> #include <uORB/topics/vehicle_control_mode.h> #include <uORB/topics/optical_flow.h> diff --git a/src/modules/multirotor_pos_control/multirotor_pos_control.c b/src/modules/multirotor_pos_control/multirotor_pos_control.c index 3d23d0c09..5af7e2a82 100644 --- a/src/modules/multirotor_pos_control/multirotor_pos_control.c +++ b/src/modules/multirotor_pos_control/multirotor_pos_control.c @@ -61,8 +61,8 @@ #include <uORB/topics/vehicle_attitude_setpoint.h> #include <uORB/topics/vehicle_local_position.h> #include <uORB/topics/vehicle_local_position_setpoint.h> -#include <uORB/topics/vehicle_global_position_setpoint.h> #include <uORB/topics/vehicle_global_velocity_setpoint.h> +#include <uORB/topics/mission_item_triplet.h> #include <systemlib/systemlib.h> #include <systemlib/pid/pid.h> #include <mavlink/mavlink_log.h> @@ -190,12 +190,12 @@ static int multirotor_pos_control_thread_main(int argc, char *argv[]) memset(&manual, 0, sizeof(manual)); struct vehicle_local_position_s local_pos; memset(&local_pos, 0, sizeof(local_pos)); - struct vehicle_local_position_setpoint_s local_pos_sp; - memset(&local_pos_sp, 0, sizeof(local_pos_sp)); - struct vehicle_global_position_setpoint_s global_pos_sp; - memset(&global_pos_sp, 0, sizeof(global_pos_sp)); + struct mission_item_triplet_s triplet; + memset(&triplet, 0, sizeof(triplet)); struct vehicle_global_velocity_setpoint_s global_vel_sp; memset(&global_vel_sp, 0, sizeof(global_vel_sp)); + struct vehicle_local_position_setpoint_s local_pos_sp; + memset(&local_pos_sp, 0, sizeof(local_pos_sp)); /* subscribe to attitude, motor setpoints and system state */ int param_sub = orb_subscribe(ORB_ID(parameter_update)); @@ -203,9 +203,7 @@ static int multirotor_pos_control_thread_main(int argc, char *argv[]) int att_sub = orb_subscribe(ORB_ID(vehicle_attitude)); int att_sp_sub = orb_subscribe(ORB_ID(vehicle_attitude_setpoint)); int manual_sub = orb_subscribe(ORB_ID(manual_control_setpoint)); - int local_pos_sp_sub = orb_subscribe(ORB_ID(vehicle_local_position_setpoint)); - int local_pos_sub = orb_subscribe(ORB_ID(vehicle_local_position)); - int global_pos_sp_sub = orb_subscribe(ORB_ID(vehicle_global_position_setpoint)); + int mission_triplet_sub = orb_subscribe(ORB_ID(mission_item_triplet)); /* publish setpoint */ orb_advert_t local_pos_sp_pub = orb_advertise(ORB_ID(vehicle_local_position_setpoint), &local_pos_sp); @@ -292,11 +290,11 @@ static int multirotor_pos_control_thread_main(int argc, char *argv[]) orb_copy(ORB_ID(vehicle_control_mode), control_mode_sub, &control_mode); } - orb_check(global_pos_sp_sub, &updated); + orb_check(mission_triplet_sub, &updated); if (updated) { - orb_copy(ORB_ID(vehicle_global_position_setpoint), global_pos_sp_sub, &global_pos_sp); - global_pos_sp_valid = true; + orb_copy(ORB_ID(mission_item_triplet), mission_triplet_sub, &triplet); + global_pos_sp_valid = triplet.current_valid; reset_mission_sp = true; } @@ -329,7 +327,6 @@ static int multirotor_pos_control_thread_main(int argc, char *argv[]) orb_copy(ORB_ID(manual_control_setpoint), manual_sub, &manual); orb_copy(ORB_ID(vehicle_attitude), att_sub, &att); orb_copy(ORB_ID(vehicle_attitude_setpoint), att_sp_sub, &att_sp); - orb_copy(ORB_ID(vehicle_local_position), local_pos_sub, &local_pos); float z_sp_offs_max = params.z_vel_max / params.z_p * 2.0f; float xy_sp_offs_max = params.xy_vel_max / params.xy_p * 2.0f; @@ -459,24 +456,22 @@ static int multirotor_pos_control_thread_main(int argc, char *argv[]) /* update global setpoint projection */ if (global_pos_sp_valid) { - /* global position setpoint valid, use it */ - double sp_lat = global_pos_sp.lat * 1e-7; - double sp_lon = global_pos_sp.lon * 1e-7; + /* project global setpoint to local setpoint */ - map_projection_project(sp_lat, sp_lon, &(local_pos_sp.x), &(local_pos_sp.y)); + map_projection_project(triplet.current.lat, triplet.current.lon, &(local_pos_sp.x), &(local_pos_sp.y)); - if (global_pos_sp.altitude_is_relative) { - local_pos_sp.z = -global_pos_sp.altitude; + if (triplet.current.altitude_is_relative) { + local_pos_sp.z = -triplet.current.altitude; } else { - local_pos_sp.z = local_pos.ref_alt - global_pos_sp.altitude; + local_pos_sp.z = local_pos.ref_alt - triplet.current.lat; } /* update yaw setpoint only if value is valid */ - if (isfinite(global_pos_sp.yaw) && fabsf(global_pos_sp.yaw) < M_TWOPI) { - att_sp.yaw_body = global_pos_sp.yaw; + if (isfinite(triplet.current.yaw) && fabsf(triplet.current.yaw) < M_TWOPI) { + att_sp.yaw_body = triplet.current.yaw; } - mavlink_log_info(mavlink_fd, "[mpc] new sp: %.7f, %.7f (%.2f, %.2f)", (double)sp_lat, sp_lon, (double)local_pos_sp.x, (double)local_pos_sp.y); + mavlink_log_info(mavlink_fd, "[mpc] new sp: %.7f, %.7f (%.2f, %.2f)", triplet.current.lat, triplet.current.lon, (double)local_pos_sp.x, (double)local_pos_sp.y); } else { if (reset_auto_sp_xy) { diff --git a/src/modules/navigator/navigator_main.cpp b/src/modules/navigator/navigator_main.cpp index d93ecc7cd..48f828ff7 100644 --- a/src/modules/navigator/navigator_main.cpp +++ b/src/modules/navigator/navigator_main.cpp @@ -440,6 +440,7 @@ Navigator::offboard_mission_update() struct mission_s offboard_mission; if (orb_copy(ORB_ID(mission), _offboard_mission_sub, &offboard_mission) == OK) { + _mission.set_offboard_dataman_id(offboard_mission.dataman_id); _mission.set_current_offboard_mission_index(offboard_mission.current_index); _mission.set_offboard_mission_count(offboard_mission.count); diff --git a/src/modules/navigator/navigator_mission.cpp b/src/modules/navigator/navigator_mission.cpp index 993f8f133..6576aae70 100644 --- a/src/modules/navigator/navigator_mission.cpp +++ b/src/modules/navigator/navigator_mission.cpp @@ -53,7 +53,8 @@ static const int ERROR = -1; Mission::Mission() : - + + _offboard_dataman_id(-1), _current_offboard_mission_index(0), _current_onboard_mission_index(0), _offboard_mission_item_count(0), @@ -68,6 +69,12 @@ Mission::~Mission() } void +Mission::set_offboard_dataman_id(int new_id) +{ + _offboard_dataman_id = new_id; +} + +void Mission::set_current_offboard_mission_index(int new_index) { if (new_index != -1) { @@ -132,8 +139,16 @@ Mission::get_current_mission_item(struct mission_item_s *new_mission_item, bool /* otherwise fallback to offboard */ } else if (current_offboard_mission_available()) { + dm_item_t dm_current; + + if (_offboard_dataman_id == 0) { + dm_current = DM_KEY_WAYPOINTS_OFFBOARD_0; + } else { + dm_current = DM_KEY_WAYPOINTS_OFFBOARD_1; + } + const ssize_t len = sizeof(struct mission_item_s); - if (dm_read(DM_KEY_WAYPOINTS_OFFBOARD, _current_offboard_mission_index, new_mission_item, len) != len) { + if (dm_read(dm_current, _current_offboard_mission_index, new_mission_item, len) != len) { /* not supposed to happen unless the datamanager can't access the SD card, etc. */ _current_mission_type = MISSION_TYPE_NONE; return ERROR; @@ -166,8 +181,16 @@ Mission::get_next_mission_item(struct mission_item_s *new_mission_item) /* otherwise fallback to offboard */ } else if (next_offboard_mission_available()) { + dm_item_t dm_current; + + if (_offboard_dataman_id == 0) { + dm_current = DM_KEY_WAYPOINTS_OFFBOARD_0; + } else { + dm_current = DM_KEY_WAYPOINTS_OFFBOARD_1; + } + const ssize_t len = sizeof(struct mission_item_s); - if (dm_read(DM_KEY_WAYPOINTS_OFFBOARD, _current_offboard_mission_index + 1, new_mission_item, len) != len) { + if (dm_read(dm_current, _current_offboard_mission_index + 1, new_mission_item, len) != len) { /* not supposed to happen unless the datamanager can't access the SD card, etc. */ return ERROR; } diff --git a/src/modules/navigator/navigator_mission.h b/src/modules/navigator/navigator_mission.h index e8e476382..15d4e86bf 100644 --- a/src/modules/navigator/navigator_mission.h +++ b/src/modules/navigator/navigator_mission.h @@ -55,6 +55,7 @@ public: */ ~Mission(); + void set_offboard_dataman_id(int new_id); void set_current_offboard_mission_index(int new_index); void set_current_onboard_mission_index(int new_index); void set_offboard_mission_count(unsigned new_count); @@ -78,6 +79,7 @@ private: bool next_onboard_mission_available(); bool next_offboard_mission_available(); + int _offboard_dataman_id; unsigned _current_offboard_mission_index; unsigned _current_onboard_mission_index; unsigned _offboard_mission_item_count; /** number of offboard mission items available */ diff --git a/src/modules/position_estimator_inav/position_estimator_inav_main.c b/src/modules/position_estimator_inav/position_estimator_inav_main.c index 10007bf96..3084b6d92 100644 --- a/src/modules/position_estimator_inav/position_estimator_inav_main.c +++ b/src/modules/position_estimator_inav/position_estimator_inav_main.c @@ -236,13 +236,13 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) if (ret < 0) { /* poll error */ - errx(1, "subscriptions poll error on init."); + mavlink_log_info(mavlink_fd, "[inav] poll error on init"); } else if (ret > 0) { if (fds_init[0].revents & POLLIN) { orb_copy(ORB_ID(sensor_combined), sensor_combined_sub, &sensor); - if (wait_baro && sensor.baro_counter > baro_counter) { + if (wait_baro && sensor.baro_counter != baro_counter) { baro_counter = sensor.baro_counter; /* mean calculation over several measurements */ @@ -320,8 +320,7 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) if (ret < 0) { /* poll error */ - warnx("subscriptions poll error."); - thread_should_exit = true; + mavlink_log_info(mavlink_fd, "[inav] poll error on init"); continue; } else if (ret > 0) { @@ -355,7 +354,7 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) if (fds[4].revents & POLLIN) { orb_copy(ORB_ID(sensor_combined), sensor_combined_sub, &sensor); - if (sensor.accelerometer_counter > accel_counter) { + if (sensor.accelerometer_counter != accel_counter) { if (att.R_valid) { /* correct accel bias, now only for Z */ sensor.accelerometer_m_s2[2] -= accel_bias[2]; @@ -381,7 +380,7 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) accel_updates++; } - if (sensor.baro_counter > baro_counter) { + if (sensor.baro_counter != baro_counter) { baro_corr = - sensor.baro_alt_meter - z_est[0]; baro_counter = sensor.baro_counter; baro_updates++; diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 5c621cfb2..f630b6f2a 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -66,7 +66,7 @@ controls_init(void) sbus_init("/dev/ttyS2"); /* default to a 1:1 input map, all enabled */ - for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { + for (unsigned i = 0; i < PX4IO_RC_INPUT_CHANNELS; i++) { unsigned base = PX4IO_P_RC_CONFIG_STRIDE * i; r_page_rc_input_config[base + PX4IO_P_RC_CONFIG_OPTIONS] = 0; @@ -94,6 +94,9 @@ controls_tick() { * other. Don't do that. */ + /* receive signal strenght indicator (RSSI). 0 = no connection, 1000: perfect connection */ + uint16_t rssi = 0; + perf_begin(c_gather_dsm); uint16_t temp_count = r_raw_rc_count; bool dsm_updated = dsm_input(r_raw_rc_values, &temp_count); @@ -104,14 +107,15 @@ controls_tick() { r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM11; else r_status_flags &= ~PX4IO_P_STATUS_FLAGS_RC_DSM11; + + rssi = 1000; } perf_end(c_gather_dsm); perf_begin(c_gather_sbus); - bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, PX4IO_CONTROL_CHANNELS /* XXX this should be INPUT channels, once untangled */); + bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, &rssi, PX4IO_RC_INPUT_CHANNELS); if (sbus_updated) { r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_SBUS; - r_raw_rc_count = 8; } perf_end(c_gather_sbus); @@ -122,10 +126,19 @@ controls_tick() { */ perf_begin(c_gather_ppm); bool ppm_updated = ppm_input(r_raw_rc_values, &r_raw_rc_count); - if (ppm_updated) + if (ppm_updated) { + + /* XXX sample RSSI properly here */ + rssi = 1000; + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_PPM; + } perf_end(c_gather_ppm); + /* limit number of channels to allowable data size */ + if (r_raw_rc_count > PX4IO_RC_INPUT_CHANNELS) + r_raw_rc_count = PX4IO_RC_INPUT_CHANNELS; + /* * In some cases we may have received a frame, but input has still * been lost. @@ -197,14 +210,16 @@ controls_tick() { /* and update the scaled/mapped version */ unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; - ASSERT(mapped < PX4IO_CONTROL_CHANNELS); + if (mapped < PX4IO_CONTROL_CHANNELS) { - /* invert channel if pitch - pulling the lever down means pitching up by convention */ - if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ - scaled = -scaled; + /* invert channel if pitch - pulling the lever down means pitching up by convention */ + if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ + scaled = -scaled; - r_rc_values[mapped] = SIGNED_TO_REG(scaled); - assigned_channels |= (1 << mapped); + r_rc_values[mapped] = SIGNED_TO_REG(scaled); + assigned_channels |= (1 << mapped); + + } } } @@ -221,7 +236,7 @@ controls_tick() { * This might happen if a protocol-based receiver returns an update * that contains no channels that we have mapped. */ - if (assigned_channels == 0) { + if (assigned_channels == 0 || rssi == 0) { rc_input_lost = true; } else { /* set RC OK flag */ @@ -321,8 +336,8 @@ ppm_input(uint16_t *values, uint16_t *num_values) /* PPM data exists, copy it */ *num_values = ppm_decoded_channels; - if (*num_values > PX4IO_CONTROL_CHANNELS) - *num_values = PX4IO_CONTROL_CHANNELS; + if (*num_values > PX4IO_RC_INPUT_CHANNELS) + *num_values = PX4IO_RC_INPUT_CHANNELS; for (unsigned i = 0; i < *num_values; i++) values[i] = ppm_buffer[i]; diff --git a/src/modules/px4iofirmware/dsm.c b/src/modules/px4iofirmware/dsm.c index fd3b72015..4d306d6d0 100644 --- a/src/modules/px4iofirmware/dsm.c +++ b/src/modules/px4iofirmware/dsm.c @@ -355,7 +355,7 @@ dsm_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values) continue; /* ignore channels out of range */ - if (channel >= PX4IO_INPUT_CHANNELS) + if (channel >= PX4IO_RC_INPUT_CHANNELS) continue; /* update the decoded channel count */ diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index 05897b4ce..e55ef784a 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -77,7 +77,8 @@ enum mixer_source { MIX_NONE, MIX_FMU, MIX_OVERRIDE, - MIX_FAILSAFE + MIX_FAILSAFE, + MIX_OVERRIDE_FMU_OK }; static mixer_source source; @@ -135,10 +136,19 @@ mixer_tick(void) if ( (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) && (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) && - !(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED)) { + !(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED) && + !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) { /* if allowed, mix from RC inputs directly */ source = MIX_OVERRIDE; + } else if ( (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) && + !(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) { + + /* if allowed, mix from RC inputs directly up to available rc channels */ + source = MIX_OVERRIDE_FMU_OK; } } @@ -185,7 +195,7 @@ mixer_tick(void) r_page_servos[i] = r_page_servo_failsafe[i]; /* safe actuators for FMU feedback */ - r_page_actuators[i] = (r_page_servos[i] - 1500) / 600.0f; + r_page_actuators[i] = FLOAT_TO_REG((r_page_servos[i] - 1500) / 600.0f); } @@ -201,6 +211,10 @@ mixer_tick(void) for (unsigned i = mixed; i < PX4IO_SERVO_COUNT; i++) r_page_servos[i] = 0; + + for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) { + r_page_actuators[i] = FLOAT_TO_REG(outputs[i]); + } } if ((should_arm || should_always_enable_pwm) && !mixer_servos_armed) { @@ -236,24 +250,35 @@ mixer_callback(uintptr_t handle, uint8_t control_index, float &control) { - if (control_group != 0) + if (control_group > 3) return -1; switch (source) { case MIX_FMU: - if (control_index < PX4IO_CONTROL_CHANNELS) { - control = REG_TO_FLOAT(r_page_controls[control_index]); + if (control_index < PX4IO_CONTROL_CHANNELS && control_group < PX4IO_CONTROL_GROUPS ) { + control = REG_TO_FLOAT(r_page_controls[CONTROL_PAGE_INDEX(control_group, control_index)]); break; } return -1; case MIX_OVERRIDE: - if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << control_index)) { + if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << CONTROL_PAGE_INDEX(control_group, control_index))) { control = REG_TO_FLOAT(r_page_rc_input[PX4IO_P_RC_BASE + control_index]); break; } return -1; + case MIX_OVERRIDE_FMU_OK: + /* FMU is ok but we are in override mode, use direct rc control for the available rc channels. The remaining channels are still controlled by the fmu */ + if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << CONTROL_PAGE_INDEX(control_group, control_index))) { + control = REG_TO_FLOAT(r_page_rc_input[PX4IO_P_RC_BASE + control_index]); + break; + } else if (control_index < PX4IO_CONTROL_CHANNELS && control_group < PX4IO_CONTROL_GROUPS) { + control = REG_TO_FLOAT(r_page_controls[CONTROL_PAGE_INDEX(control_group, control_index)]); + break; + } + return -1; + case MIX_FAILSAFE: case MIX_NONE: control = 0.0f; diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 5e5396782..c10f0167c 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -63,7 +63,7 @@ * readable pages to be densely packed. Page numbers do not need to be * packed. * - * Definitions marked 1 are only valid on PX4IOv1 boards. Likewise, + * Definitions marked [1] are only valid on PX4IOv1 boards. Likewise, * [2] denotes definitions specific to the PX4IOv2 board. */ @@ -76,6 +76,9 @@ #define PX4IO_PROTOCOL_VERSION 4 +/* maximum allowable sizes on this protocol version */ +#define PX4IO_PROTOCOL_MAX_CONTROL_COUNT 8 /**< The protocol does not support more than set here, individual units might support less - see PX4IO_P_CONFIG_CONTROL_COUNT */ + /* static configuration page */ #define PX4IO_PAGE_CONFIG 0 #define PX4IO_P_CONFIG_PROTOCOL_VERSION 0 /* PX4IO_PROTOCOL_VERSION */ @@ -87,6 +90,7 @@ #define PX4IO_P_CONFIG_RC_INPUT_COUNT 6 /* hardcoded max R/C input count supported */ #define PX4IO_P_CONFIG_ADC_INPUT_COUNT 7 /* hardcoded max ADC inputs */ #define PX4IO_P_CONFIG_RELAY_COUNT 8 /* hardcoded # of relay outputs */ +#define PX4IO_P_CONFIG_CONTROL_GROUP_COUNT 8 /**< hardcoded # of control groups*/ /* dynamic status page */ #define PX4IO_PAGE_STATUS 1 @@ -124,6 +128,7 @@ #define PX4IO_P_STATUS_VSERVO 6 /* [2] servo rail voltage in mV */ #define PX4IO_P_STATUS_VRSSI 7 /* [2] RSSI voltage */ #define PX4IO_P_STATUS_PRSSI 8 /* [2] RSSI PWM value */ +#define PX4IO_P_STATUS_NRSSI 9 /* [2] Normalized RSSI value, 0: no reception, 1000: perfect reception */ /* array of post-mix actuator outputs, -10000..10000 */ #define PX4IO_PAGE_ACTUATORS 2 /* 0..CONFIG_ACTUATOR_COUNT-1 */ @@ -184,44 +189,59 @@ enum { /* DSM bind states */ dsm_bind_reinit_uart }; /* 8 */ -#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ +#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ + +#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */ +#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */ + +#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */ /* autopilot control values, -10000..10000 */ -#define PX4IO_PAGE_CONTROLS 51 /* 0..CONFIG_CONTROL_COUNT */ +#define PX4IO_PAGE_CONTROLS 51 /**< actuator control groups, one after the other, 8 wide */ +#define PX4IO_P_CONTROLS_GROUP_0 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 0) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ +#define PX4IO_P_CONTROLS_GROUP_1 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 1) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ +#define PX4IO_P_CONTROLS_GROUP_2 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 2) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ +#define PX4IO_P_CONTROLS_GROUP_3 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 3) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ + +#define PX4IO_P_CONTROLS_GROUP_VALID 64 +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /* group 0 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /* group 1 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /* group 2 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /* group 3 is valid / received */ /* raw text load to the mixer parser - ignores offset */ -#define PX4IO_PAGE_MIXERLOAD 52 +#define PX4IO_PAGE_MIXERLOAD 52 /* R/C channel config */ -#define PX4IO_PAGE_RC_CONFIG 53 /* R/C input configuration */ -#define PX4IO_P_RC_CONFIG_MIN 0 /* lowest input value */ -#define PX4IO_P_RC_CONFIG_CENTER 1 /* center input value */ -#define PX4IO_P_RC_CONFIG_MAX 2 /* highest input value */ -#define PX4IO_P_RC_CONFIG_DEADZONE 3 /* band around center that is ignored */ -#define PX4IO_P_RC_CONFIG_ASSIGNMENT 4 /* mapped input value */ -#define PX4IO_P_RC_CONFIG_OPTIONS 5 /* channel options bitmask */ +#define PX4IO_PAGE_RC_CONFIG 53 /**< R/C input configuration */ +#define PX4IO_P_RC_CONFIG_MIN 0 /**< lowest input value */ +#define PX4IO_P_RC_CONFIG_CENTER 1 /**< center input value */ +#define PX4IO_P_RC_CONFIG_MAX 2 /**< highest input value */ +#define PX4IO_P_RC_CONFIG_DEADZONE 3 /**< band around center that is ignored */ +#define PX4IO_P_RC_CONFIG_ASSIGNMENT 4 /**< mapped input value */ +#define PX4IO_P_RC_CONFIG_OPTIONS 5 /**< channel options bitmask */ #define PX4IO_P_RC_CONFIG_OPTIONS_ENABLED (1 << 0) #define PX4IO_P_RC_CONFIG_OPTIONS_REVERSE (1 << 1) -#define PX4IO_P_RC_CONFIG_STRIDE 6 /* spacing between channel config data */ +#define PX4IO_P_RC_CONFIG_STRIDE 6 /**< spacing between channel config data */ /* PWM output - overrides mixer */ -#define PX4IO_PAGE_DIRECT_PWM 54 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_DIRECT_PWM 54 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* PWM failsafe values - zero disables the output */ -#define PX4IO_PAGE_FAILSAFE_PWM 55 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_FAILSAFE_PWM 55 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* Debug and test page - not used in normal operation */ -#define PX4IO_PAGE_TEST 127 -#define PX4IO_P_TEST_LED 0 /* set the amber LED on/off */ +#define PX4IO_PAGE_TEST 127 +#define PX4IO_P_TEST_LED 0 /**< set the amber LED on/off */ /* PWM minimum values for certain ESCs */ -#define PX4IO_PAGE_CONTROL_MIN_PWM 106 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_CONTROL_MIN_PWM 106 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* PWM maximum values for certain ESCs */ -#define PX4IO_PAGE_CONTROL_MAX_PWM 107 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_CONTROL_MAX_PWM 107 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* PWM disarmed values that are active, even when SAFETY_SAFE */ -#define PX4IO_PAGE_DISARMED_PWM 108 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_DISARMED_PWM 108 /* 0..CONFIG_ACTUATOR_COUNT-1 */ /** * As-needed mixer data upload. diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index ff9eecd74..745bd5705 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -45,6 +45,7 @@ #include <string.h> #include <poll.h> #include <signal.h> +#include <crc32.h> #include <drivers/drv_pwm_output.h> #include <drivers/drv_hrt.h> @@ -117,6 +118,29 @@ show_debug_messages(void) } } +static void +heartbeat_blink(void) +{ + static bool heartbeat = false; + LED_BLUE(heartbeat = !heartbeat); +} + + +static void +calculate_fw_crc(void) +{ +#define APP_SIZE_MAX 0xf000 +#define APP_LOAD_ADDRESS 0x08001000 + // compute CRC of the current firmware + uint32_t sum = 0; + for (unsigned p = 0; p < APP_SIZE_MAX; p += 4) { + uint32_t bytes = *(uint32_t *)(p + APP_LOAD_ADDRESS); + sum = crc32part((uint8_t *)&bytes, sizeof(bytes), sum); + } + r_page_setup[PX4IO_P_SETUP_CRC] = sum & 0xFFFF; + r_page_setup[PX4IO_P_SETUP_CRC+1] = sum >> 16; +} + int user_start(int argc, char *argv[]) { @@ -129,6 +153,9 @@ user_start(int argc, char *argv[]) /* configure the high-resolution time/callout interface */ hrt_init(); + /* calculate our fw CRC so FMU can decide if we need to update */ + calculate_fw_crc(); + /* * Poll at 1ms intervals for received bytes that have not triggered * a DMA event. @@ -201,6 +228,7 @@ user_start(int argc, char *argv[]) */ uint64_t last_debug_time = 0; + uint64_t last_heartbeat_time = 0; for (;;) { /* track the rate at which the loop is running */ @@ -216,6 +244,11 @@ user_start(int argc, char *argv[]) controls_tick(); perf_end(controls_perf); + if ((hrt_absolute_time() - last_heartbeat_time) > 250*1000) { + last_heartbeat_time = hrt_absolute_time(); + heartbeat_blink(); + } + #if 0 /* check for debug activity */ show_debug_messages(); diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index 4fea0288c..dea04a663 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -53,7 +53,9 @@ */ #define PX4IO_SERVO_COUNT 8 #define PX4IO_CONTROL_CHANNELS 8 -#define PX4IO_INPUT_CHANNELS 8 // XXX this should be 18 channels +#define PX4IO_CONTROL_GROUPS 2 +#define PX4IO_RC_INPUT_CHANNELS 18 +#define PX4IO_RC_MAPPED_CONTROL_CHANNELS 8 /**< This is the maximum number of channels mapped/used */ /* * Debug logging @@ -169,6 +171,8 @@ extern pwm_limit_t pwm_limit; #define BUTTON_SAFETY stm32_gpioread(GPIO_BTN_SAFETY) +#define CONTROL_PAGE_INDEX(_group, _channel) (_group * PX4IO_CONTROL_CHANNELS + _channel) + /* * Mixer */ @@ -209,7 +213,7 @@ extern int dsm_init(const char *device); extern bool dsm_input(uint16_t *values, uint16_t *num_values); extern void dsm_bind(uint16_t cmd, int pulses); extern int sbus_init(const char *device); -extern bool sbus_input(uint16_t *values, uint16_t *num_values, uint16_t max_channels); +extern bool sbus_input(uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels); /** global debug level for isr_debug() */ extern volatile uint8_t debug_level; diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 86a40bc22..916b893c4 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -45,6 +45,8 @@ #include <drivers/drv_hrt.h> #include <drivers/drv_pwm_output.h> +#include <systemlib/systemlib.h> +#include <stm32_pwr.h> #include "px4io.h" #include "protocol.h" @@ -68,7 +70,7 @@ static const uint16_t r_page_config[] = { [PX4IO_P_CONFIG_MAX_TRANSFER] = 64, /* XXX hardcoded magic number */ [PX4IO_P_CONFIG_CONTROL_COUNT] = PX4IO_CONTROL_CHANNELS, [PX4IO_P_CONFIG_ACTUATOR_COUNT] = PX4IO_SERVO_COUNT, - [PX4IO_P_CONFIG_RC_INPUT_COUNT] = PX4IO_CONTROL_CHANNELS, + [PX4IO_P_CONFIG_RC_INPUT_COUNT] = PX4IO_RC_INPUT_CHANNELS, [PX4IO_P_CONFIG_ADC_INPUT_COUNT] = PX4IO_ADC_CHANNEL_COUNT, [PX4IO_P_CONFIG_RELAY_COUNT] = PX4IO_RELAY_CHANNELS, }; @@ -112,7 +114,7 @@ uint16_t r_page_servos[PX4IO_SERVO_COUNT]; uint16_t r_page_raw_rc_input[] = { [PX4IO_P_RAW_RC_COUNT] = 0, - [PX4IO_P_RAW_RC_BASE ... (PX4IO_P_RAW_RC_BASE + PX4IO_CONTROL_CHANNELS)] = 0 + [PX4IO_P_RAW_RC_BASE ... (PX4IO_P_RAW_RC_BASE + PX4IO_RC_INPUT_CHANNELS)] = 0 }; /** @@ -122,7 +124,7 @@ uint16_t r_page_raw_rc_input[] = */ uint16_t r_page_rc_input[] = { [PX4IO_P_RC_VALID] = 0, - [PX4IO_P_RC_BASE ... (PX4IO_P_RC_BASE + PX4IO_CONTROL_CHANNELS)] = 0 + [PX4IO_P_RC_BASE ... (PX4IO_P_RC_BASE + PX4IO_RC_MAPPED_CONTROL_CHANNELS)] = 0 }; /** @@ -154,6 +156,8 @@ volatile uint16_t r_page_setup[] = [PX4IO_P_SETUP_VBATT_SCALE] = 10000, #endif [PX4IO_P_SETUP_SET_DEBUG] = 0, + [PX4IO_P_SETUP_REBOOT_BL] = 0, + [PX4IO_P_SETUP_CRC ... (PX4IO_P_SETUP_CRC+1)] = 0, }; #define PX4IO_P_SETUP_FEATURES_VALID (0) @@ -172,7 +176,7 @@ volatile uint16_t r_page_setup[] = * * Control values from the FMU. */ -volatile uint16_t r_page_controls[PX4IO_CONTROL_CHANNELS]; +volatile uint16_t r_page_controls[PX4IO_CONTROL_GROUPS * PX4IO_CONTROL_CHANNELS]; /* * PAGE 102 does not have a buffer. @@ -183,7 +187,7 @@ volatile uint16_t r_page_controls[PX4IO_CONTROL_CHANNELS]; * * R/C channel input configuration. */ -uint16_t r_page_rc_input_config[PX4IO_CONTROL_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE]; +uint16_t r_page_rc_input_config[PX4IO_RC_INPUT_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE]; /* valid options */ #define PX4IO_P_RC_CONFIG_OPTIONS_VALID (PX4IO_P_RC_CONFIG_OPTIONS_REVERSE | PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) @@ -235,7 +239,7 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num case PX4IO_PAGE_CONTROLS: /* copy channel data */ - while ((offset < PX4IO_CONTROL_CHANNELS) && (num_values > 0)) { + while ((offset < PX4IO_CONTROL_GROUPS * PX4IO_CONTROL_CHANNELS) && (num_values > 0)) { /* XXX range-check value? */ r_page_controls[offset] = *values; @@ -501,6 +505,29 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) isr_debug(0, "set debug %u\n", (unsigned)r_page_setup[PX4IO_P_SETUP_SET_DEBUG]); break; + case PX4IO_P_SETUP_REBOOT_BL: + if ((r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) || + (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) || + (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) { + // don't allow reboot while armed + break; + } + + // check the magic value + if (value != PX4IO_REBOOT_BL_MAGIC) + break; + + // note that we don't set BL_WAIT_MAGIC in + // BKP_DR1 as that is not necessary given the + // timing of the forceupdate command. The + // bootloader on px4io waits for enough time + // anyway, and this method works with older + // bootloader versions (tested with both + // revision 3 and revision 4). + + up_systemreset(); + break; + case PX4IO_P_SETUP_DSM: dsm_bind(value & 0x0f, (value >> 4) & 7); break; @@ -525,7 +552,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) unsigned index = offset - channel * PX4IO_P_RC_CONFIG_STRIDE; uint16_t *conf = &r_page_rc_input_config[channel * PX4IO_P_RC_CONFIG_STRIDE]; - if (channel >= PX4IO_CONTROL_CHANNELS) + if (channel >= PX4IO_RC_INPUT_CHANNELS) return -1; /* disable the channel until we have a chance to sanity-check it */ @@ -573,7 +600,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) if (conf[PX4IO_P_RC_CONFIG_DEADZONE] > 500) { count++; } - if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_CONTROL_CHANNELS) { + if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_RC_MAPPED_CONTROL_CHANNELS) { count++; } diff --git a/src/modules/px4iofirmware/safety.c b/src/modules/px4iofirmware/safety.c index 95335f038..cdb54a80a 100644 --- a/src/modules/px4iofirmware/safety.c +++ b/src/modules/px4iofirmware/safety.c @@ -77,7 +77,6 @@ static unsigned blink_counter = 0; static bool safety_button_pressed; static void safety_check_button(void *arg); -static void heartbeat_blink(void *arg); static void failsafe_blink(void *arg); void @@ -86,9 +85,6 @@ safety_init(void) /* arrange for the button handler to be called at 10Hz */ hrt_call_every(&arming_call, 1000, 100000, safety_check_button, NULL); - /* arrange for the heartbeat handler to be called at 4Hz */ - hrt_call_every(&heartbeat_call, 1000, 250000, heartbeat_blink, NULL); - /* arrange for the failsafe blinker to be called at 8Hz */ hrt_call_every(&failsafe_call, 1000, 125000, failsafe_blink, NULL); } @@ -164,16 +160,6 @@ safety_check_button(void *arg) } static void -heartbeat_blink(void *arg) -{ - static bool heartbeat = false; - - /* XXX add flags here that need to be frobbed by various loops */ - - LED_BLUE(heartbeat = !heartbeat); -} - -static void failsafe_blink(void *arg) { /* indicate that a serious initialisation error occured */ @@ -192,4 +178,4 @@ failsafe_blink(void *arg) } LED_AMBER(failsafe); -}
\ No newline at end of file +} diff --git a/src/modules/px4iofirmware/sbus.c b/src/modules/px4iofirmware/sbus.c index c523df6ca..6aca2bd11 100644 --- a/src/modules/px4iofirmware/sbus.c +++ b/src/modules/px4iofirmware/sbus.c @@ -54,6 +54,27 @@ #define SBUS_FRAME_SIZE 25 #define SBUS_INPUT_CHANNELS 16 +#define SBUS_FLAGS_BYTE 23 +#define SBUS_FAILSAFE_BIT 3 +#define SBUS_FRAMELOST_BIT 2 + +/* + Measured values with Futaba FX-30/R6108SB: + -+100% on TX: PCM 1.100/1.520/1.950ms -> SBus raw values: 350/1024/1700 (100% ATV) + -+140% on TX: PCM 0.930/1.520/2.112ms -> SBus raw values: 78/1024/1964 (140% ATV) + -+152% on TX: PCM 0.884/1.520/2.160ms -> SBus raw values: 1/1024/2047 (140% ATV plus dirty tricks) +*/ + +/* define range mapping here, -+100% -> 1000..2000 */ +#define SBUS_RANGE_MIN 200.0f +#define SBUS_RANGE_MAX 1800.0f + +#define SBUS_TARGET_MIN 1000.0f +#define SBUS_TARGET_MAX 2000.0f + +/* pre-calculate the floating point stuff as far as possible at compile time */ +#define SBUS_SCALE_FACTOR ((SBUS_TARGET_MAX - SBUS_TARGET_MIN) / (SBUS_RANGE_MAX - SBUS_RANGE_MIN)) +#define SBUS_SCALE_OFFSET (int)(SBUS_TARGET_MIN - (SBUS_SCALE_FACTOR * SBUS_RANGE_MIN + 0.5f)) static int sbus_fd = -1; @@ -66,7 +87,7 @@ static unsigned partial_frame_count; unsigned sbus_frame_drops; -static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t max_channels); +static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels); int sbus_init(const char *device) @@ -97,7 +118,7 @@ sbus_init(const char *device) } bool -sbus_input(uint16_t *values, uint16_t *num_values, uint16_t max_channels) +sbus_input(uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels) { ssize_t ret; hrt_abstime now; @@ -154,7 +175,7 @@ sbus_input(uint16_t *values, uint16_t *num_values, uint16_t max_channels) * decode it. */ partial_frame_count = 0; - return sbus_decode(now, values, num_values, max_channels); + return sbus_decode(now, values, num_values, rssi, max_channels); } /* @@ -194,7 +215,7 @@ static const struct sbus_bit_pick sbus_decoder[SBUS_INPUT_CHANNELS][3] = { }; static bool -sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t max_values) +sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_values) { /* check frame boundary markers to avoid out-of-sync cases */ if ((frame[0] != 0x0f) || (frame[24] != 0x00)) { @@ -202,15 +223,6 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint return false; } - /* if the failsafe or connection lost bit is set, we consider the frame invalid */ - if ((frame[23] & (1 << 2)) && /* signal lost */ - (frame[23] & (1 << 3))) { /* failsafe */ - - /* actively announce signal loss */ - *values = 0; - return false; - } - /* we have received something we think is a frame */ last_frame_time = frame_time; @@ -234,22 +246,41 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint } } - /* convert 0-2048 values to 1000-2000 ppm encoding in a very sloppy fashion */ - values[channel] = (value / 2) + 998; + + /* convert 0-2048 values to 1000-2000 ppm encoding in a not too sloppy fashion */ + values[channel] = (uint16_t)(value * SBUS_SCALE_FACTOR +.5f) + SBUS_SCALE_OFFSET; } /* decode switch channels if data fields are wide enough */ - if (PX4IO_INPUT_CHANNELS > 17 && chancount > 15) { + if (PX4IO_RC_INPUT_CHANNELS > 17 && chancount > 15) { chancount = 18; /* channel 17 (index 16) */ - values[16] = (frame[23] & (1 << 0)) * 1000 + 998; + values[16] = (frame[SBUS_FLAGS_BYTE] & (1 << 0)) * 1000 + 998; /* channel 18 (index 17) */ - values[17] = (frame[23] & (1 << 1)) * 1000 + 998; + values[17] = (frame[SBUS_FLAGS_BYTE] & (1 << 1)) * 1000 + 998; } /* note the number of channels decoded */ *num_values = chancount; + /* decode and handle failsafe and frame-lost flags */ + if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FAILSAFE_BIT)) { /* failsafe */ + /* report that we failed to read anything valid off the receiver */ + *rssi = 0; + return false; + } + else if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FRAMELOST_BIT)) { /* a frame was lost */ + /* set a special warning flag or try to calculate some kind of RSSI information - to be implemented + * + * Attention! This flag indicates a skipped frame only, not a total link loss! Handling this + * condition as fail-safe greatly reduces the reliability and range of the radio link, + * e.g. by prematurely issueing return-to-launch!!! */ + + *rssi = 100; // XXX magic number indicating bad signal, but not a signal loss (yet) + } + + *rssi = 1000; + return true; } diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index f94875d5b..5dc325a05 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -68,12 +68,11 @@ #include <uORB/topics/vehicle_rates_setpoint.h> #include <uORB/topics/actuator_outputs.h> #include <uORB/topics/actuator_controls.h> -#include <uORB/topics/actuator_controls_effective.h> #include <uORB/topics/vehicle_command.h> #include <uORB/topics/vehicle_local_position.h> #include <uORB/topics/vehicle_local_position_setpoint.h> #include <uORB/topics/vehicle_global_position.h> -#include <uORB/topics/vehicle_global_position_setpoint.h> +#include <uORB/topics/mission_item_triplet.h> #include <uORB/topics/vehicle_gps_position.h> #include <uORB/topics/vehicle_vicon_position.h> #include <uORB/topics/vehicle_global_velocity_setpoint.h> @@ -691,11 +690,10 @@ int sdlog2_thread_main(int argc, char *argv[]) struct vehicle_rates_setpoint_s rates_sp; struct actuator_outputs_s act_outputs; struct actuator_controls_s act_controls; - struct actuator_controls_effective_s act_controls_effective; struct vehicle_local_position_s local_pos; struct vehicle_local_position_setpoint_s local_pos_sp; struct vehicle_global_position_s global_pos; - struct vehicle_global_position_setpoint_s global_pos_sp; + struct mission_item_triplet_s triplet; struct vehicle_gps_position_s gps_pos; struct vehicle_vicon_position_s vicon_pos; struct optical_flow_s flow; @@ -717,11 +715,10 @@ int sdlog2_thread_main(int argc, char *argv[]) int rates_sp_sub; int act_outputs_sub; int act_controls_sub; - int act_controls_effective_sub; int local_pos_sub; int local_pos_sp_sub; int global_pos_sub; - int global_pos_sp_sub; + int triplet_sub; int gps_pos_sub; int vicon_pos_sub; int flow_sub; @@ -763,9 +760,9 @@ int sdlog2_thread_main(int argc, char *argv[]) memset(&log_msg.body, 0, sizeof(log_msg.body)); /* --- IMPORTANT: DEFINE NUMBER OF ORB STRUCTS TO WAIT FOR HERE --- */ - /* number of messages */ - const ssize_t fdsc = 20; - /* Sanity check variable and index */ + /* number of subscriptions */ + const ssize_t fdsc = 19; + /* sanity check variable and index */ ssize_t fdsc_count = 0; /* file descriptors to wait for */ struct pollfd fds[fdsc]; @@ -824,12 +821,6 @@ int sdlog2_thread_main(int argc, char *argv[]) fds[fdsc_count].events = POLLIN; fdsc_count++; - /* --- ACTUATOR CONTROL EFFECTIVE --- */ - subs.act_controls_effective_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE); - fds[fdsc_count].fd = subs.act_controls_effective_sub; - fds[fdsc_count].events = POLLIN; - fdsc_count++; - /* --- LOCAL POSITION --- */ subs.local_pos_sub = orb_subscribe(ORB_ID(vehicle_local_position)); fds[fdsc_count].fd = subs.local_pos_sub; @@ -849,8 +840,8 @@ int sdlog2_thread_main(int argc, char *argv[]) fdsc_count++; /* --- GLOBAL POSITION SETPOINT--- */ - subs.global_pos_sp_sub = orb_subscribe(ORB_ID(vehicle_global_position_setpoint)); - fds[fdsc_count].fd = subs.global_pos_sp_sub; + subs.triplet_sub = orb_subscribe(ORB_ID(mission_item_triplet)); + fds[fdsc_count].fd = subs.triplet_sub; fds[fdsc_count].events = POLLIN; fdsc_count++; @@ -1114,12 +1105,6 @@ int sdlog2_thread_main(int argc, char *argv[]) LOGBUFFER_WRITE_AND_COUNT(ATTC); } - /* --- ACTUATOR CONTROL EFFECTIVE --- */ - if (fds[ifds++].revents & POLLIN) { - orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, subs.act_controls_effective_sub, &buf.act_controls_effective); - // TODO not implemented yet - } - /* --- LOCAL POSITION --- */ if (fds[ifds++].revents & POLLIN) { orb_copy(ORB_ID(vehicle_local_position), subs.local_pos_sub, &buf.local_pos); @@ -1165,20 +1150,21 @@ int sdlog2_thread_main(int argc, char *argv[]) /* --- GLOBAL POSITION SETPOINT --- */ if (fds[ifds++].revents & POLLIN) { - orb_copy(ORB_ID(vehicle_global_position_setpoint), subs.global_pos_sp_sub, &buf.global_pos_sp); + orb_copy(ORB_ID(mission_item_triplet), subs.triplet_sub, &buf.triplet); log_msg.msg_type = LOG_GPSP_MSG; - log_msg.body.log_GPSP.altitude_is_relative = buf.global_pos_sp.altitude_is_relative; - log_msg.body.log_GPSP.lat = buf.global_pos_sp.lat; - log_msg.body.log_GPSP.lon = buf.global_pos_sp.lon; - log_msg.body.log_GPSP.altitude = buf.global_pos_sp.altitude; - log_msg.body.log_GPSP.yaw = buf.global_pos_sp.yaw; - log_msg.body.log_GPSP.loiter_radius = buf.global_pos_sp.loiter_radius; - log_msg.body.log_GPSP.loiter_direction = buf.global_pos_sp.loiter_direction; - log_msg.body.log_GPSP.nav_cmd = buf.global_pos_sp.nav_cmd; - log_msg.body.log_GPSP.param1 = buf.global_pos_sp.param1; - log_msg.body.log_GPSP.param2 = buf.global_pos_sp.param2; - log_msg.body.log_GPSP.param3 = buf.global_pos_sp.param3; - log_msg.body.log_GPSP.param4 = buf.global_pos_sp.param4; + log_msg.body.log_GPSP.altitude_is_relative = buf.triplet.current.altitude_is_relative; + log_msg.body.log_GPSP.lat = (int32_t)(buf.triplet.current.lat * 1e7); + log_msg.body.log_GPSP.lon = (int32_t)(buf.triplet.current.lon * 1e7); + log_msg.body.log_GPSP.altitude = buf.triplet.current.altitude; + log_msg.body.log_GPSP.yaw = buf.triplet.current.yaw; + log_msg.body.log_GPSP.nav_cmd = buf.triplet.current.nav_cmd; + log_msg.body.log_GPSP.loiter_radius = buf.triplet.current.loiter_radius; + log_msg.body.log_GPSP.loiter_direction = buf.triplet.current.loiter_direction; + log_msg.body.log_GPSP.loiter_radius = buf.triplet.current.loiter_radius; + log_msg.body.log_GPSP.loiter_direction = buf.triplet.current.loiter_direction; + log_msg.body.log_GPSP.radius = buf.triplet.current.radius; + log_msg.body.log_GPSP.time_inside = buf.triplet.current.time_inside; + log_msg.body.log_GPSP.pitch_min = buf.triplet.current.pitch_min; LOGBUFFER_WRITE_AND_COUNT(GPSP); } @@ -1208,6 +1194,7 @@ int sdlog2_thread_main(int argc, char *argv[]) log_msg.msg_type = LOG_RC_MSG; /* Copy only the first 8 channels of 14 */ memcpy(log_msg.body.log_RC.channel, buf.rc.chan, sizeof(log_msg.body.log_RC.channel)); + log_msg.body.log_RC.channel_count = buf.rc.chan_count; LOGBUFFER_WRITE_AND_COUNT(RC); } diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h index 90093a407..cb1393f1f 100644 --- a/src/modules/sdlog2/sdlog2_messages.h +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -159,6 +159,7 @@ struct log_STAT_s { #define LOG_RC_MSG 11 struct log_RC_s { float channel[8]; + uint8_t channel_count; }; /* --- OUT0 - ACTUATOR_0 OUTPUT --- */ @@ -213,13 +214,12 @@ struct log_GPSP_s { int32_t lon; float altitude; float yaw; + uint8_t nav_cmd; float loiter_radius; int8_t loiter_direction; - uint8_t nav_cmd; - float param1; - float param2; - float param3; - float param4; + float radius; + float time_inside; + float pitch_min; }; /* --- ESC - ESC STATE --- */ @@ -281,13 +281,13 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(GPS, "QBffLLfffff", "GPSTime,FixType,EPH,EPV,Lat,Lon,Alt,VelN,VelE,VelD,Cog"), LOG_FORMAT(ATTC, "ffff", "Roll,Pitch,Yaw,Thrust"), LOG_FORMAT(STAT, "BBBfffBB", "MainState,NavState,ArmState,BatV,BatC,BatRem,BatWarn,Landed"), - LOG_FORMAT(RC, "ffffffff", "Ch0,Ch1,Ch2,Ch3,Ch4,Ch5,Ch6,Ch7"), + LOG_FORMAT(RC, "ffffffffB", "Ch0,Ch1,Ch2,Ch3,Ch4,Ch5,Ch6,Ch7,Count"), LOG_FORMAT(OUT0, "ffffffff", "Out0,Out1,Out2,Out3,Out4,Out5,Out6,Out7"), LOG_FORMAT(AIRS, "ff", "IndSpeed,TrueSpeed"), LOG_FORMAT(ARSP, "fff", "RollRateSP,PitchRateSP,YawRateSP"), LOG_FORMAT(FLOW, "hhfffBB", "RawX,RawY,CompX,CompY,Dist,Q,SensID"), LOG_FORMAT(GPOS, "LLffff", "Lat,Lon,Alt,VelN,VelE,VelD"), - LOG_FORMAT(GPSP, "BLLfffbBffff", "AltRel,Lat,Lon,Alt,Yaw,LoiterR,LoiterDir,NavCmd,P1,P2,P3,P4"), + LOG_FORMAT(GPSP, "BLLffBfbfff", "AltRel,Lat,Lon,Alt,Yaw,NavCmd,LoitRad,LoitDir,Rad,TimeIn,pitMin"), LOG_FORMAT(ESC, "HBBBHHHHHHfH", "Counter,NumESC,Conn,N,Ver,Adr,Volt,Amp,RPM,Temp,SetP,SetPRAW"), LOG_FORMAT(GVSP, "fff", "VX,VY,VZ"), /* system-level messages, ID >= 0x80 */ diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index 587b81588..c54128cb5 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -190,11 +190,30 @@ PARAM_DEFINE_FLOAT(RC15_MAX, 2000); PARAM_DEFINE_FLOAT(RC15_REV, 1.0f); PARAM_DEFINE_FLOAT(RC15_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC16_MIN, 1000); +PARAM_DEFINE_FLOAT(RC16_TRIM, 1500); +PARAM_DEFINE_FLOAT(RC16_MAX, 2000); +PARAM_DEFINE_FLOAT(RC16_REV, 1.0f); +PARAM_DEFINE_FLOAT(RC16_DZ, 0.0f); + +PARAM_DEFINE_FLOAT(RC17_MIN, 1000); +PARAM_DEFINE_FLOAT(RC17_TRIM, 1500); +PARAM_DEFINE_FLOAT(RC17_MAX, 2000); +PARAM_DEFINE_FLOAT(RC17_REV, 1.0f); +PARAM_DEFINE_FLOAT(RC17_DZ, 0.0f); + +PARAM_DEFINE_FLOAT(RC18_MIN, 1000); +PARAM_DEFINE_FLOAT(RC18_TRIM, 1500); +PARAM_DEFINE_FLOAT(RC18_MAX, 2000); +PARAM_DEFINE_FLOAT(RC18_REV, 1.0f); +PARAM_DEFINE_FLOAT(RC18_DZ, 0.0f); + #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 PARAM_DEFINE_INT32(RC_RL1_DSM_VCC, 0); /* Relay 1 controls DSM VCC */ #endif PARAM_DEFINE_INT32(RC_DSM_BIND, -1); /* -1 = Idle, 0 = Start DSM2 bind, 1 = Start DSMX bind */ +PARAM_DEFINE_INT32(BAT_V_SCALE_IO, 10000); #ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.0082f); #else @@ -226,3 +245,7 @@ PARAM_DEFINE_INT32(RC_MAP_AUX3, 0); /**< default function: camera azimuth / yaw PARAM_DEFINE_FLOAT(RC_SCALE_ROLL, 0.6f); PARAM_DEFINE_FLOAT(RC_SCALE_PITCH, 0.6f); PARAM_DEFINE_FLOAT(RC_SCALE_YAW, 2.0f); + +PARAM_DEFINE_INT32(RC_FS_CH, 0); /**< RC failsafe channel, 0 = disable */ +PARAM_DEFINE_INT32(RC_FS_MODE, 0); /**< RC failsafe mode: 0 = too low means signal loss, 1 = too high means signal loss */ +PARAM_DEFINE_FLOAT(RC_FS_THR, 800); /**< RC failsafe PWM threshold */ diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index 6d38b98ec..d9f037c27 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -165,7 +165,7 @@ public: int start(); private: - static const unsigned _rc_max_chan_count = RC_CHANNELS_MAX; /**< maximum number of r/c channels we handle */ + static const unsigned _rc_max_chan_count = RC_INPUT_MAX_CHANNELS; /**< maximum number of r/c channels we handle */ hrt_abstime _rc_last_valid; /**< last time we got a valid RC signal */ @@ -260,6 +260,10 @@ private: float rc_scale_yaw; float rc_scale_flaps; + int rc_fs_ch; + int rc_fs_mode; + float rc_fs_thr; + float battery_voltage_scaling; } _parameters; /**< local copies of interesting parameters */ @@ -305,6 +309,10 @@ private: param_t rc_scale_yaw; param_t rc_scale_flaps; + param_t rc_fs_ch; + param_t rc_fs_mode; + param_t rc_fs_thr; + param_t battery_voltage_scaling; param_t board_rotation; @@ -517,6 +525,11 @@ Sensors::Sensors() : _parameter_handles.rc_scale_yaw = param_find("RC_SCALE_YAW"); _parameter_handles.rc_scale_flaps = param_find("RC_SCALE_FLAPS"); + /* RC failsafe */ + _parameter_handles.rc_fs_ch = param_find("RC_FS_CH"); + _parameter_handles.rc_fs_mode = param_find("RC_FS_MODE"); + _parameter_handles.rc_fs_thr = param_find("RC_FS_THR"); + /* gyro offsets */ _parameter_handles.gyro_offset[0] = param_find("SENS_GYRO_XOFF"); _parameter_handles.gyro_offset[1] = param_find("SENS_GYRO_YOFF"); @@ -589,7 +602,7 @@ Sensors::parameters_update() float tmpRevFactor = 0.0f; /* rc values */ - for (unsigned int i = 0; i < RC_CHANNELS_MAX; i++) { + for (unsigned int i = 0; i < _rc_max_chan_count; i++) { param_get(_parameter_handles.min[i], &(_parameters.min[i])); param_get(_parameter_handles.trim[i], &(_parameters.trim[i])); @@ -668,6 +681,9 @@ Sensors::parameters_update() param_get(_parameter_handles.rc_scale_pitch, &(_parameters.rc_scale_pitch)); param_get(_parameter_handles.rc_scale_yaw, &(_parameters.rc_scale_yaw)); param_get(_parameter_handles.rc_scale_flaps, &(_parameters.rc_scale_flaps)); + param_get(_parameter_handles.rc_fs_ch, &(_parameters.rc_fs_ch)); + param_get(_parameter_handles.rc_fs_mode, &(_parameters.rc_fs_mode)); + param_get(_parameter_handles.rc_fs_thr, &(_parameters.rc_fs_thr)); /* update RC function mappings */ _rc.function[THROTTLE] = _parameters.rc_map_throttle - 1; @@ -1256,6 +1272,18 @@ Sensors::rc_poll() if (rc_input.channel_count < 4) return; + /* failsafe check */ + if (_parameters.rc_fs_ch != 0) { + if (_parameters.rc_fs_mode == 0) { + if (rc_input.values[_parameters.rc_fs_ch - 1] < _parameters.rc_fs_thr) + return; + + } else if (_parameters.rc_fs_mode == 1) { + if (rc_input.values[_parameters.rc_fs_ch - 1] > _parameters.rc_fs_thr) + return; + } + } + unsigned channel_limit = rc_input.channel_count; if (channel_limit > _rc_max_chan_count) diff --git a/src/modules/systemlib/perf_counter.c b/src/modules/systemlib/perf_counter.c index bf84b7945..b4ca0ed3e 100644 --- a/src/modules/systemlib/perf_counter.c +++ b/src/modules/systemlib/perf_counter.c @@ -295,10 +295,11 @@ perf_print_counter(perf_counter_t handle) case PC_ELAPSED: { struct perf_ctr_elapsed *pce = (struct perf_ctr_elapsed *)handle; - printf("%s: %llu events, %lluus elapsed, min %lluus max %lluus\n", + printf("%s: %llu events, %lluus elapsed, %llu avg, min %lluus max %lluus\n", handle->name, pce->event_count, pce->time_total, + pce->time_total / pce->event_count, pce->time_least, pce->time_most); break; diff --git a/src/modules/systemlib/rc_check.c b/src/modules/systemlib/rc_check.c index b4350cc24..21e15ec56 100644 --- a/src/modules/systemlib/rc_check.c +++ b/src/modules/systemlib/rc_check.c @@ -45,7 +45,7 @@ #include <systemlib/rc_check.h> #include <systemlib/param/param.h> #include <mavlink/mavlink_log.h> -#include <uORB/topics/rc_channels.h> +#include <drivers/drv_rc_input.h> int rc_calibration_check(int mavlink_fd) { @@ -66,7 +66,7 @@ int rc_calibration_check(int mavlink_fd) { int channel_fail_count = 0; - for (int i = 0; i < RC_CHANNELS_MAX; i++) { + for (int i = 0; i < RC_INPUT_MAX_CHANNELS; i++) { /* should the channel be enabled? */ uint8_t count = 0; diff --git a/src/modules/uORB/objects_common.cpp b/src/modules/uORB/objects_common.cpp index 9489550c6..79a820c06 100644 --- a/src/modules/uORB/objects_common.cpp +++ b/src/modules/uORB/objects_common.cpp @@ -117,9 +117,6 @@ ORB_DEFINE(vehicle_local_position_setpoint, struct vehicle_local_position_setpoi #include "topics/vehicle_bodyframe_speed_setpoint.h" ORB_DEFINE(vehicle_bodyframe_speed_setpoint, struct vehicle_bodyframe_speed_setpoint_s); -#include "topics/vehicle_global_position_setpoint.h" -ORB_DEFINE(vehicle_global_position_setpoint, struct vehicle_global_position_setpoint_s); - #include "topics/mission_item_triplet.h" ORB_DEFINE(mission_item_triplet, struct mission_item_triplet_s); @@ -176,13 +173,6 @@ ORB_DEFINE(actuator_controls_3, struct actuator_controls_s); #include "topics/actuator_armed.h" ORB_DEFINE(actuator_armed, struct actuator_armed_s); -/* actuator controls, as set by actuators / mixers after limiting */ -#include "topics/actuator_controls_effective.h" -ORB_DEFINE(actuator_controls_effective_0, struct actuator_controls_effective_s); -ORB_DEFINE(actuator_controls_effective_1, struct actuator_controls_effective_s); -ORB_DEFINE(actuator_controls_effective_2, struct actuator_controls_effective_s); -ORB_DEFINE(actuator_controls_effective_3, struct actuator_controls_effective_s); - #include "topics/actuator_outputs.h" ORB_DEFINE(actuator_outputs_0, struct actuator_outputs_s); ORB_DEFINE(actuator_outputs_1, struct actuator_outputs_s); diff --git a/src/modules/uORB/topics/actuator_controls_effective.h b/src/modules/uORB/topics/actuator_controls_effective.h index d7b404ad4..54d84231f 100644 --- a/src/modules/uORB/topics/actuator_controls_effective.h +++ b/src/modules/uORB/topics/actuator_controls_effective.h @@ -46,34 +46,34 @@ #ifndef TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H #define TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H -#include <stdint.h> -#include "../uORB.h" -#include "actuator_controls.h" +//#include <stdint.h> +//#include "../uORB.h" +//#include "actuator_controls.h" +// +//#define NUM_ACTUATOR_CONTROLS_EFFECTIVE NUM_ACTUATOR_CONTROLS +//#define NUM_ACTUATOR_CONTROL_GROUPS_EFFECTIVE NUM_ACTUATOR_CONTROL_GROUPS /**< for sanity checking */ +// +///** +// * @addtogroup topics +// * @{ +// */ +// +//struct actuator_controls_effective_s { +// uint64_t timestamp; +// float control_effective[NUM_ACTUATOR_CONTROLS_EFFECTIVE]; +//}; +// +///** +// * @} +// */ +// +///* actuator control sets; this list can be expanded as more controllers emerge */ +//ORB_DECLARE(actuator_controls_effective_0); +//ORB_DECLARE(actuator_controls_effective_1); +//ORB_DECLARE(actuator_controls_effective_2); +//ORB_DECLARE(actuator_controls_effective_3); +// +///* control sets with pre-defined applications */ +//#define ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE ORB_ID(actuator_controls_effective_0) -#define NUM_ACTUATOR_CONTROLS_EFFECTIVE NUM_ACTUATOR_CONTROLS -#define NUM_ACTUATOR_CONTROL_GROUPS_EFFECTIVE NUM_ACTUATOR_CONTROL_GROUPS /**< for sanity checking */ - -/** - * @addtogroup topics - * @{ - */ - -struct actuator_controls_effective_s { - uint64_t timestamp; - float control_effective[NUM_ACTUATOR_CONTROLS_EFFECTIVE]; -}; - -/** - * @} - */ - -/* actuator control sets; this list can be expanded as more controllers emerge */ -ORB_DECLARE(actuator_controls_effective_0); -ORB_DECLARE(actuator_controls_effective_1); -ORB_DECLARE(actuator_controls_effective_2); -ORB_DECLARE(actuator_controls_effective_3); - -/* control sets with pre-defined applications */ -#define ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE ORB_ID(actuator_controls_effective_0) - -#endif /* TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H */
\ No newline at end of file +#endif /* TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H */ diff --git a/src/modules/uORB/topics/mission.h b/src/modules/uORB/topics/mission.h index 370242007..dcdb234fa 100644 --- a/src/modules/uORB/topics/mission.h +++ b/src/modules/uORB/topics/mission.h @@ -80,8 +80,8 @@ enum ORIGIN { struct mission_item_s { bool altitude_is_relative; /**< true if altitude is relative from start point */ - double lat; /**< latitude in degrees * 1E7 */ - double lon; /**< longitude in degrees * 1E7 */ + double lat; /**< latitude in degrees */ + double lon; /**< longitude in degrees */ float altitude; /**< altitude in meters */ float yaw; /**< in radians NED -PI..+PI */ float loiter_radius; /**< loiter radius in meters, 0 for a VTOL to hover */ @@ -89,6 +89,7 @@ struct mission_item_s enum NAV_CMD nav_cmd; /**< navigation command */ float radius; /**< radius in which the mission is accepted as reached in meters */ float time_inside; /**< time that the MAV should stay inside the radius before advancing in seconds */ + float pitch_min; /**< minimal pitch angle for fixed wing takeoff waypoints */ bool autocontinue; /**< true if next waypoint should follow after this one */ int index; /**< index matching the mavlink waypoint */ enum ORIGIN origin; /**< where the waypoint has been generated */ @@ -96,6 +97,7 @@ struct mission_item_s struct mission_s { + int dataman_id; /**< default -1, there are two offboard storage places in the dataman: 0 or 1 */ unsigned count; /**< count of the missions stored in the datamanager */ int current_index; /**< default -1, start at the one changed latest */ }; diff --git a/src/modules/uORB/topics/rc_channels.h b/src/modules/uORB/topics/rc_channels.h index 5a8580143..086b2ef15 100644 --- a/src/modules/uORB/topics/rc_channels.h +++ b/src/modules/uORB/topics/rc_channels.h @@ -1,9 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. - * Author: @author Nils Wenzler <wenzlern@student.ethz.ch> - * @author Ivan Ovinnikov <oivan@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -47,13 +44,13 @@ /** * The number of RC channel inputs supported. - * Current (Q1/2013) radios support up to 18 channels, + * Current (Q4/2013) radios support up to 18 channels, * leaving at a sane value of 15. * This number can be greater then number of RC channels, * because single RC channel can be mapped to multiple * functions, e.g. for various mode switches. */ -#define RC_CHANNELS_MAX 15 +#define RC_CHANNELS_MAPPED_MAX 15 /** * This defines the mapping of the RC functions. @@ -91,7 +88,7 @@ struct rc_channels_s { uint64_t timestamp_last_valid; /**< timestamp of last valid RC signal. */ struct { float scaled; /**< Scaled to -1..1 (throttle: 0..1) */ - } chan[RC_CHANNELS_MAX]; + } chan[RC_CHANNELS_MAPPED_MAX]; uint8_t chan_count; /**< number of valid channels */ /*String array to store the names of the functions*/ diff --git a/src/modules/uORB/topics/vehicle_control_mode.h b/src/modules/uORB/topics/vehicle_control_mode.h index 38fb74c9b..e26fb97c8 100644 --- a/src/modules/uORB/topics/vehicle_control_mode.h +++ b/src/modules/uORB/topics/vehicle_control_mode.h @@ -78,6 +78,7 @@ struct vehicle_control_mode_s bool flag_control_position_enabled; /**< true if position is controlled */ bool flag_control_altitude_enabled; /**< true if altitude is controlled */ bool flag_control_climb_rate_enabled; /**< true if climb rate is controlled */ + bool flag_control_flighttermination_enabled; /**< true if flighttermination is enabled */ bool flag_control_auto_enabled; // TEMP uint8_t auto_state; // TEMP navigation state for AUTO modes diff --git a/src/modules/uORB/topics/vehicle_status.h b/src/modules/uORB/topics/vehicle_status.h index 1c184d3a7..1c3763924 100644 --- a/src/modules/uORB/topics/vehicle_status.h +++ b/src/modules/uORB/topics/vehicle_status.h @@ -95,6 +95,12 @@ typedef enum { HIL_STATE_ON } hil_state_t; + +typedef enum { + FLIGHTTERMINATION_STATE_OFF = 0, + FLIGHTTERMINATION_STATE_ON +} flighttermination_state_t; + typedef enum { MODE_SWITCH_MANUAL = 0, MODE_SWITCH_ASSISTED, @@ -229,6 +235,8 @@ struct vehicle_status_s uint16_t errors_count2; uint16_t errors_count3; uint16_t errors_count4; + + flighttermination_state_t flighttermination_state; }; /** diff --git a/src/systemcmds/preflight_check/preflight_check.c b/src/systemcmds/preflight_check/preflight_check.c index 07581459b..982b03782 100644 --- a/src/systemcmds/preflight_check/preflight_check.c +++ b/src/systemcmds/preflight_check/preflight_check.c @@ -200,7 +200,7 @@ system_eval: led_toggle(leds, LED_BLUE); /* display and sound error */ - for (int i = 0; i < 50; i++) + for (int i = 0; i < 14; i++) { led_toggle(leds, LED_BLUE); led_toggle(leds, LED_AMBER); diff --git a/src/systemcmds/pwm/pwm.c b/src/systemcmds/pwm/pwm.c index 898c04cd5..7c23f38c2 100644 --- a/src/systemcmds/pwm/pwm.c +++ b/src/systemcmds/pwm/pwm.c @@ -210,7 +210,7 @@ pwm_main(int argc, char *argv[]) err(1, "PWM_SERVO_GET_COUNT"); if (!strcmp(argv[1], "arm")) { - /* tell IO that its ok to disable its safety with the switch */ + /* tell safety that its ok to disable it with the switch */ ret = ioctl(fd, PWM_SERVO_SET_ARM_OK, 0); if (ret != OK) err(1, "PWM_SERVO_SET_ARM_OK"); diff --git a/src/systemcmds/tests/module.mk b/src/systemcmds/tests/module.mk index 53c0e6b4f..68a080c77 100644 --- a/src/systemcmds/tests/module.mk +++ b/src/systemcmds/tests/module.mk @@ -24,9 +24,8 @@ SRCS = test_adc.c \ test_uart_loopback.c \ test_uart_send.c \ test_mixer.cpp \ - test_dataman.c \ - tests_file.c \ + test_file.c \ tests_main.c \ - tests_param.c - -INCLUDE_DIRS += $(MAVLINK_SRC)/include/mavlink + test_param.c \ + test_ppm_loopback.c \ + test_rc.c diff --git a/src/systemcmds/tests/tests_file.c b/src/systemcmds/tests/test_file.c index 7f3a654bf..798724cf1 100644 --- a/src/systemcmds/tests/tests_file.c +++ b/src/systemcmds/tests/test_file.c @@ -32,7 +32,7 @@ ****************************************************************************/ /** - * @file tests_file.c + * @file test_file.c * * File write test. */ diff --git a/src/systemcmds/tests/tests_param.c b/src/systemcmds/tests/test_param.c index 13f17bc43..318d2505b 100644 --- a/src/systemcmds/tests/tests_param.c +++ b/src/systemcmds/tests/test_param.c @@ -32,7 +32,7 @@ ****************************************************************************/ /** - * @file tests_param.c + * @file test_param.c * * Tests related to the parameter system. */ diff --git a/src/systemcmds/tests/test_ppm_loopback.c b/src/systemcmds/tests/test_ppm_loopback.c new file mode 100644 index 000000000..b9041b013 --- /dev/null +++ b/src/systemcmds/tests/test_ppm_loopback.c @@ -0,0 +1,178 @@ +/**************************************************************************** + * + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file test_ppm_loopback.c + * Tests the PWM outputs and PPM input + * + */ + +#include <nuttx/config.h> + +#include <sys/types.h> + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <fcntl.h> +#include <errno.h> +#include <debug.h> + +#include <arch/board/board.h> +#include <drivers/drv_pwm_output.h> +#include <drivers/drv_rc_input.h> +#include <uORB/topics/rc_channels.h> +#include <systemlib/err.h> + +#include "tests.h" + +#include <math.h> +#include <float.h> + +int test_ppm_loopback(int argc, char *argv[]) +{ + + int _rc_sub = orb_subscribe(ORB_ID(input_rc)); + + int servo_fd, result; + servo_position_t data[PWM_OUTPUT_MAX_CHANNELS]; + servo_position_t pos; + + servo_fd = open(PWM_OUTPUT_DEVICE_PATH, O_RDWR); + + if (servo_fd < 0) { + printf("failed opening /dev/pwm_servo\n"); + } + + printf("Servo readback, pairs of values should match defaults\n"); + + unsigned servo_count; + result = ioctl(servo_fd, PWM_SERVO_GET_COUNT, (unsigned long)&servo_count); + if (result != OK) { + warnx("PWM_SERVO_GET_COUNT"); + return ERROR; + } + + for (unsigned i = 0; i < servo_count; i++) { + result = ioctl(servo_fd, PWM_SERVO_GET(i), (unsigned long)&pos); + + if (result < 0) { + printf("failed reading channel %u\n", i); + } + + //printf("%u: %u %u\n", i, pos, data[i]); + + } + + // /* tell safety that its ok to disable it with the switch */ + // result = ioctl(servo_fd, PWM_SERVO_SET_ARM_OK, 0); + // if (result != OK) + // warnx("FAIL: PWM_SERVO_SET_ARM_OK"); + // tell output device that the system is armed (it will output values if safety is off) + // result = ioctl(servo_fd, PWM_SERVO_ARM, 0); + // if (result != OK) + // warnx("FAIL: PWM_SERVO_ARM"); + + int pwm_values[] = {1200, 1300, 1900, 1700, 1500, 1250, 1800, 1400}; + + + // for (unsigned i = 0; (i < servo_count) && (i < sizeof(pwm_values) / sizeof(pwm_values[0])); i++) { + // result = ioctl(servo_fd, PWM_SERVO_SET(i), pwm_values[i]); + + // if (result) { + // (void)close(servo_fd); + // return ERROR; + // } else { + // warnx("channel %d set to %d", i, pwm_values[i]); + // } + // } + + warnx("servo count: %d", servo_count); + + struct pwm_output_values pwm_out = {.values = {0}, .channel_count = 0}; + + for (unsigned i = 0; (i < servo_count) && (i < sizeof(pwm_values) / sizeof(pwm_values[0])); i++) { + pwm_out.values[i] = pwm_values[i]; + //warnx("channel %d: disarmed PWM: %d", i+1, pwm_values[i]); + pwm_out.channel_count++; + } + + result = ioctl(servo_fd, PWM_SERVO_SET_DISARMED_PWM, (long unsigned int)&pwm_out); + + /* give driver 10 ms to propagate */ + + /* read low-level values from FMU or IO RC inputs (PPM, Spektrum, S.Bus) */ + struct rc_input_values rc_input; + orb_copy(ORB_ID(input_rc), _rc_sub, &rc_input); + usleep(100000); + + /* open PPM input and expect values close to the output values */ + + bool rc_updated; + orb_check(_rc_sub, &rc_updated); + + if (rc_updated) { + + orb_copy(ORB_ID(input_rc), _rc_sub, &rc_input); + + // int ppm_fd = open(RC_INPUT_DEVICE_PATH, O_RDONLY); + + + + // struct rc_input_values rc; + // result = read(ppm_fd, &rc, sizeof(rc)); + + // if (result != sizeof(rc)) { + // warnx("Error reading RC output"); + // (void)close(servo_fd); + // (void)close(ppm_fd); + // return ERROR; + // } + + /* go and check values */ + for (unsigned i = 0; (i < servo_count) && (i < sizeof(pwm_values) / sizeof(pwm_values[0])); i++) { + if (fabsf(rc_input.values[i] - pwm_values[i]) > 10) { + warnx("comparison fail: RC: %d, expected: %d", rc_input.values[i], pwm_values[i]); + (void)close(servo_fd); + return ERROR; + } + } + } else { + warnx("failed reading RC input data"); + return ERROR; + } + + warnx("PPM LOOPBACK TEST PASSED SUCCESSFULLY!"); + + return 0; +} diff --git a/src/systemcmds/tests/test_rc.c b/src/systemcmds/tests/test_rc.c new file mode 100644 index 000000000..72619fc8b --- /dev/null +++ b/src/systemcmds/tests/test_rc.c @@ -0,0 +1,146 @@ +/**************************************************************************** + * + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file test_ppm_loopback.c + * Tests the PWM outputs and PPM input + * + */ + +#include <nuttx/config.h> + +#include <sys/types.h> + +#include <stdio.h> +#include <poll.h> +#include <stdlib.h> +#include <unistd.h> +#include <fcntl.h> +#include <errno.h> +#include <debug.h> + +#include <arch/board/board.h> +#include <drivers/drv_pwm_output.h> +#include <drivers/drv_rc_input.h> +#include <systemlib/err.h> + +#include "tests.h" + +#include <math.h> +#include <float.h> + +int test_rc(int argc, char *argv[]) +{ + + int _rc_sub = orb_subscribe(ORB_ID(input_rc)); + + /* read low-level values from FMU or IO RC inputs (PPM, Spektrum, S.Bus) */ + struct rc_input_values rc_input; + struct rc_input_values rc_last; + orb_copy(ORB_ID(input_rc), _rc_sub, &rc_input); + usleep(100000); + + /* open PPM input and expect values close to the output values */ + + bool rc_updated; + orb_check(_rc_sub, &rc_updated); + + warnx("Reading PPM values - press any key to abort"); + warnx("This test guarantees: 10 Hz update rates, no glitches (channel values), no channel count changes."); + + if (rc_updated) { + + /* copy initial set */ + for (unsigned i = 0; i < rc_input.channel_count; i++) { + rc_last.values[i] = rc_input.values[i]; + } + + rc_last.channel_count = rc_input.channel_count; + + /* poll descriptor */ + struct pollfd fds[2]; + fds[0].fd = _rc_sub; + fds[0].events = POLLIN; + fds[1].fd = 0; + fds[1].events = POLLIN; + + while (true) { + + int ret = poll(fds, 2, 200); + + if (ret > 0) { + + if (fds[0].revents & POLLIN) { + + orb_copy(ORB_ID(input_rc), _rc_sub, &rc_input); + + /* go and check values */ + for (unsigned i = 0; i < rc_input.channel_count; i++) { + if (fabsf(rc_input.values[i] - rc_last.values[i]) > 20) { + warnx("comparison fail: RC: %d, expected: %d", rc_input.values[i], rc_last.values[i]); + (void)close(_rc_sub); + return ERROR; + } + + rc_last.values[i] = rc_input.values[i]; + } + + if (rc_last.channel_count != rc_input.channel_count) { + warnx("channel count mismatch: last: %d, now: %d", rc_last.channel_count, rc_input.channel_count); + (void)close(_rc_sub); + return ERROR; + } + + if (hrt_absolute_time() - rc_input.timestamp > 100000) { + warnx("TIMEOUT, less than 10 Hz updates"); + (void)close(_rc_sub); + return ERROR; + } + + } else { + /* key pressed, bye bye */ + return 0; + } + + } + } + + } else { + warnx("failed reading RC input data"); + return ERROR; + } + + warnx("PPM CONTINUITY TEST PASSED SUCCESSFULLY!"); + + return 0; +} diff --git a/src/systemcmds/tests/test_sensors.c b/src/systemcmds/tests/test_sensors.c index 14503276c..096106ff3 100644 --- a/src/systemcmds/tests/test_sensors.c +++ b/src/systemcmds/tests/test_sensors.c @@ -1,7 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -49,6 +48,8 @@ #include <fcntl.h> #include <errno.h> #include <debug.h> +#include <math.h> +#include <systemlib/err.h> #include <arch/board/board.h> @@ -77,6 +78,8 @@ static int accel(int argc, char *argv[]); static int gyro(int argc, char *argv[]); static int mag(int argc, char *argv[]); static int baro(int argc, char *argv[]); +static int accel1(int argc, char *argv[]); +static int gyro1(int argc, char *argv[]); /**************************************************************************** * Private Data @@ -91,6 +94,8 @@ struct { {"gyro", "/dev/gyro", gyro}, {"mag", "/dev/mag", mag}, {"baro", "/dev/baro", baro}, + {"accel1", "/dev/accel1", accel1}, + {"gyro1", "/dev/gyro1", gyro1}, {NULL, NULL, NULL} }; @@ -133,23 +138,58 @@ accel(int argc, char *argv[]) printf("\tACCEL accel: x:%8.4f\ty:%8.4f\tz:%8.4f m/s^2\n", (double)buf.x, (double)buf.y, (double)buf.z); } - // /* wait at least 10ms, sensor should have data after no more than 2ms */ - // usleep(100000); + if (fabsf(buf.x) > 30.0f || fabsf(buf.y) > 30.0f || fabsf(buf.z) > 30.0f) { + warnx("ACCEL1 acceleration values out of range!"); + return ERROR; + } + + /* Let user know everything is ok */ + printf("\tOK: ACCEL passed all tests successfully\n"); + close(fd); + + return OK; +} + +static int +accel1(int argc, char *argv[]) +{ + printf("\tACCEL1: test start\n"); + fflush(stdout); + + int fd; + struct accel_report buf; + int ret; - // ret = read(fd, buf, sizeof(buf)); + fd = open("/dev/accel1", O_RDONLY); - // if (ret != sizeof(buf)) { - // printf("\tMPU-6000: read2 fail (%d)\n", ret); - // return ERROR; + if (fd < 0) { + printf("\tACCEL1: open fail, run <mpu6000 start> or <lsm303d start> first.\n"); + return ERROR; + } + + /* wait at least 100ms, sensor should have data after no more than 20ms */ + usleep(100000); + + /* read data - expect samples */ + ret = read(fd, &buf, sizeof(buf)); + + if (ret != sizeof(buf)) { + printf("\tACCEL1: read1 fail (%d)\n", ret); + return ERROR; - // } else { - // printf("\tMPU-6000 values: acc: x:%d\ty:%d\tz:%d\tgyro: r:%d\tp:%d\ty:%d\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); - // } + } else { + printf("\tACCEL1 accel: x:%8.4f\ty:%8.4f\tz:%8.4f m/s^2\n", (double)buf.x, (double)buf.y, (double)buf.z); + } - /* XXX more tests here */ + if (fabsf(buf.x) > 30.0f || fabsf(buf.y) > 30.0f || fabsf(buf.z) > 30.0f) { + warnx("ACCEL1 acceleration values out of range!"); + return ERROR; + } /* Let user know everything is ok */ - printf("\tOK: ACCEL passed all tests successfully\n"); + printf("\tOK: ACCEL1 passed all tests successfully\n"); + + close(fd); return OK; } @@ -187,6 +227,45 @@ gyro(int argc, char *argv[]) /* Let user know everything is ok */ printf("\tOK: GYRO passed all tests successfully\n"); + close(fd); + + return OK; +} + +static int +gyro1(int argc, char *argv[]) +{ + printf("\tGYRO1: test start\n"); + fflush(stdout); + + int fd; + struct gyro_report buf; + int ret; + + fd = open("/dev/gyro1", O_RDONLY); + + if (fd < 0) { + printf("\tGYRO1: open fail, run <l3gd20 start> or <mpu6000 start> first.\n"); + return ERROR; + } + + /* wait at least 5 ms, sensor should have data after that */ + usleep(5000); + + /* read data - expect samples */ + ret = read(fd, &buf, sizeof(buf)); + + if (ret != sizeof(buf)) { + printf("\tGYRO1: read fail (%d)\n", ret); + return ERROR; + + } else { + printf("\tGYRO1 rates: x:%8.4f\ty:%8.4f\tz:%8.4f rad/s\n", (double)buf.x, (double)buf.y, (double)buf.z); + } + + /* Let user know everything is ok */ + printf("\tOK: GYRO1 passed all tests successfully\n"); + close(fd); return OK; } @@ -224,6 +303,7 @@ mag(int argc, char *argv[]) /* Let user know everything is ok */ printf("\tOK: MAG passed all tests successfully\n"); + close(fd); return OK; } @@ -261,6 +341,7 @@ baro(int argc, char *argv[]) /* Let user know everything is ok */ printf("\tOK: BARO passed all tests successfully\n"); + close(fd); return OK; } diff --git a/src/systemcmds/tests/test_servo.c b/src/systemcmds/tests/test_servo.c index f95760ca8..ef8512bf5 100644 --- a/src/systemcmds/tests/test_servo.c +++ b/src/systemcmds/tests/test_servo.c @@ -1,7 +1,6 @@ /**************************************************************************** - * px4/sensors/test_hrt.c * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -13,7 +12,7 @@ * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be + * 3. Neither the name PX4 nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * @@ -32,9 +31,11 @@ * ****************************************************************************/ -/**************************************************************************** - * Included Files - ****************************************************************************/ +/** + * @file test_servo.c + * Tests the servo outputs + * + */ #include <nuttx/config.h> @@ -55,39 +56,6 @@ #include "tests.h" -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/**************************************************************************** - * Private Function Prototypes - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: test_servo - ****************************************************************************/ - int test_servo(int argc, char *argv[]) { int fd, result; @@ -110,7 +78,14 @@ int test_servo(int argc, char *argv[]) printf("Servo readback, pairs of values should match defaults\n"); - for (unsigned i = 0; i < PWM_OUTPUT_MAX_CHANNELS; i++) { + unsigned servo_count; + result = ioctl(fd, PWM_SERVO_GET_COUNT, (unsigned long)&servo_count); + if (result != OK) { + warnx("PWM_SERVO_GET_COUNT"); + return ERROR; + } + + for (unsigned i = 0; i < servo_count; i++) { result = ioctl(fd, PWM_SERVO_GET(i), (unsigned long)&pos); if (result < 0) { @@ -122,11 +97,20 @@ int test_servo(int argc, char *argv[]) } - printf("Servos arming at default values\n"); + /* tell safety that its ok to disable it with the switch */ + result = ioctl(fd, PWM_SERVO_SET_ARM_OK, 0); + if (result != OK) + warnx("FAIL: PWM_SERVO_SET_ARM_OK"); + /* tell output device that the system is armed (it will output values if safety is off) */ result = ioctl(fd, PWM_SERVO_ARM, 0); + if (result != OK) + warnx("FAIL: PWM_SERVO_ARM"); + usleep(5000000); printf("Advancing channel 0 to 1500\n"); result = ioctl(fd, PWM_SERVO_SET(0), 1500); + printf("Advancing channel 1 to 1800\n"); + result = ioctl(fd, PWM_SERVO_SET(1), 1800); out: return 0; } diff --git a/src/systemcmds/tests/test_uart_loopback.c b/src/systemcmds/tests/test_uart_loopback.c index 3be152004..f1d41739b 100644 --- a/src/systemcmds/tests/test_uart_loopback.c +++ b/src/systemcmds/tests/test_uart_loopback.c @@ -1,8 +1,6 @@ /**************************************************************************** - * px4/sensors/test_gpio.c * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Lorenz Meier <lm@inf.ethz.ch> + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -14,7 +12,7 @@ * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be + * 3. Neither the name PX4 nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * @@ -33,9 +31,11 @@ * ****************************************************************************/ -/**************************************************************************** - * Included Files - ****************************************************************************/ +/** + * @file test_uart_loopback.c + * Tests the uart outputs + * + */ #include <nuttx/config.h> @@ -55,40 +55,6 @@ #include <math.h> #include <float.h> - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/**************************************************************************** - * Private Function Prototypes - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: test_led - ****************************************************************************/ - int test_uart_loopback(int argc, char *argv[]) { @@ -97,11 +63,11 @@ int test_uart_loopback(int argc, char *argv[]) int uart5_nwrite = 0; int uart2_nwrite = 0; - int uart1 = open("/dev/ttyS0", O_RDWR | O_NOCTTY); // + /* opening stdout */ + int stdout_fd = 1; - /* assuming NuttShell is on UART1 (/dev/ttyS0) */ - int uart2 = open("/dev/ttyS1", O_RDWR | O_NONBLOCK | O_NOCTTY); // - int uart5 = open("/dev/ttyS2", O_RDWR | O_NONBLOCK | O_NOCTTY); // + int uart2 = open("/dev/ttyS1", O_RDWR | O_NONBLOCK | O_NOCTTY); + int uart5 = open("/dev/ttyS2", O_RDWR | O_NONBLOCK | O_NOCTTY); if (uart2 < 0) { printf("ERROR opening UART2, aborting..\n"); @@ -113,7 +79,7 @@ int test_uart_loopback(int argc, char *argv[]) exit(uart5); } - uint8_t sample_uart1[] = {'C', 'O', 'U', 'N', 'T', ' ', '#', '\n'}; + uint8_t sample_stdout_fd[] = {'C', 'O', 'U', 'N', 'T', ' ', '#', '\n'}; uint8_t sample_uart2[] = {'C', 'O', 'U', 'N', 'T', ' ', '#', 0}; uint8_t sample_uart5[] = {'C', 'O', 'U', 'N', 'T', ' ', '#', 0}; @@ -121,7 +87,7 @@ int test_uart_loopback(int argc, char *argv[]) for (i = 0; i < 1000; i++) { // printf("TEST #%d\n",i); - write(uart1, sample_uart1, sizeof(sample_uart1)); + write(stdout_fd, sample_stdout_fd, sizeof(sample_stdout_fd)); /* uart2 -> uart5 */ r = write(uart2, sample_uart2, sizeof(sample_uart2)); @@ -130,7 +96,7 @@ int test_uart_loopback(int argc, char *argv[]) uart2_nwrite += r; // printf("TEST #%d\n",i); - write(uart1, sample_uart1, sizeof(sample_uart1)); + write(stdout_fd, sample_stdout_fd, sizeof(sample_stdout_fd)); /* uart2 -> uart5 */ r = write(uart5, sample_uart5, sizeof(sample_uart5)); @@ -139,7 +105,7 @@ int test_uart_loopback(int argc, char *argv[]) uart5_nwrite += r; // printf("TEST #%d\n",i); - write(uart1, sample_uart1, sizeof(sample_uart1)); + write(stdout_fd, sample_stdout_fd, sizeof(sample_stdout_fd)); /* try to read back values */ do { @@ -150,7 +116,7 @@ int test_uart_loopback(int argc, char *argv[]) } while (r > 0); // printf("TEST #%d\n",i); - write(uart1, sample_uart1, sizeof(sample_uart1)); + write(stdout_fd, sample_stdout_fd, sizeof(sample_stdout_fd)); do { r = read(uart2, sample_uart5, sizeof(sample_uart5)); @@ -160,7 +126,7 @@ int test_uart_loopback(int argc, char *argv[]) } while (r > 0); // printf("TEST #%d\n",i); -// write(uart1, sample_uart1, sizeof(sample_uart5)); +// write(stdout_fd, sample_stdout_fd, sizeof(sample_uart5)); } for (i = 0; i < 200000; i++) { @@ -181,7 +147,7 @@ int test_uart_loopback(int argc, char *argv[]) } - close(uart1); + close(stdout_fd); close(uart2); close(uart5); diff --git a/src/systemcmds/tests/tests.h b/src/systemcmds/tests/tests.h index 4a5eaa0c5..a57d04be3 100644 --- a/src/systemcmds/tests/tests.h +++ b/src/systemcmds/tests/tests.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -34,6 +34,12 @@ #ifndef __APPS_PX4_TESTS_H #define __APPS_PX4_TESTS_H +/** + * @file tests.h + * Tests declaration file. + * + */ + /**************************************************************************** * Included Files ****************************************************************************/ @@ -88,6 +94,7 @@ extern int test_int(int argc, char *argv[]); extern int test_float(int argc, char *argv[]); extern int test_ppm(int argc, char *argv[]); extern int test_servo(int argc, char *argv[]); +extern int test_ppm_loopback(int argc, char *argv[]); extern int test_uart_loopback(int argc, char *argv[]); extern int test_uart_baudchange(int argc, char *argv[]); extern int test_cpuload(int argc, char *argv[]); @@ -101,7 +108,7 @@ extern int test_param(int argc, char *argv[]); extern int test_bson(int argc, char *argv[]); extern int test_file(int argc, char *argv[]); extern int test_mixer(int argc, char *argv[]); -extern int test_dataman(int argc, char *argv[]); +extern int test_rc(int argc, char *argv[]); __END_DECLS diff --git a/src/systemcmds/tests/tests_main.c b/src/systemcmds/tests/tests_main.c index 9b1cfb1fe..1088a4407 100644 --- a/src/systemcmds/tests/tests_main.c +++ b/src/systemcmds/tests/tests_main.c @@ -1,7 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: @author Lorenz Meier <lm@inf.ethz.ch> + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,6 +34,8 @@ /** * @file tests_main.c * Tests main file, loads individual tests. + * + * @author Lorenz Meier <lm@inf.ethz.ch> */ #include <nuttx/config.h> @@ -58,14 +59,6 @@ #include "tests.h" /**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/**************************************************************************** * Private Function Prototypes ****************************************************************************/ @@ -94,6 +87,7 @@ const struct { {"hrt", test_hrt, OPT_NOJIGTEST | OPT_NOALLTEST}, {"ppm", test_ppm, OPT_NOJIGTEST | OPT_NOALLTEST}, {"servo", test_servo, OPT_NOJIGTEST | OPT_NOALLTEST}, + {"ppm_loopback", test_ppm_loopback, OPT_NOALLTEST}, {"adc", test_adc, OPT_NOJIGTEST}, {"jig_voltages", test_jig_voltages, OPT_NOALLTEST}, {"uart_loopback", test_uart_loopback, OPT_NOJIGTEST | OPT_NOALLTEST}, @@ -111,8 +105,8 @@ const struct { {"bson", test_bson, 0}, {"file", test_file, 0}, {"mixer", test_mixer, OPT_NOJIGTEST | OPT_NOALLTEST}, + {"rc", test_rc, OPT_NOJIGTEST | OPT_NOALLTEST}, {"help", test_help, OPT_NOALLTEST | OPT_NOHELP | OPT_NOJIGTEST}, - {"dataman", test_dataman, OPT_NOALLTEST}, {NULL, NULL, 0} }; |