1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
|
// MESSAGE SYS_STATUS PACKING
#define MAVLINK_MSG_ID_SYS_STATUS 1
typedef struct __mavlink_sys_status_t
{
uint32_t onboard_control_sensors_present; ///< Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
uint32_t onboard_control_sensors_enabled; ///< Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
uint32_t onboard_control_sensors_health; ///< Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
uint16_t load; ///< Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
uint16_t voltage_battery; ///< Battery voltage, in millivolts (1 = 1 millivolt)
int16_t current_battery; ///< Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current
uint16_t drop_rate_comm; ///< Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
uint16_t errors_comm; ///< Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
uint16_t errors_count1; ///< Autopilot-specific errors
uint16_t errors_count2; ///< Autopilot-specific errors
uint16_t errors_count3; ///< Autopilot-specific errors
uint16_t errors_count4; ///< Autopilot-specific errors
int8_t battery_remaining; ///< Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery
} mavlink_sys_status_t;
#define MAVLINK_MSG_ID_SYS_STATUS_LEN 31
#define MAVLINK_MSG_ID_1_LEN 31
#define MAVLINK_MSG_ID_SYS_STATUS_CRC 124
#define MAVLINK_MSG_ID_1_CRC 124
#define MAVLINK_MESSAGE_INFO_SYS_STATUS { \
"SYS_STATUS", \
13, \
{ { "onboard_control_sensors_present", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_sys_status_t, onboard_control_sensors_present) }, \
{ "onboard_control_sensors_enabled", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 4, offsetof(mavlink_sys_status_t, onboard_control_sensors_enabled) }, \
{ "onboard_control_sensors_health", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 8, offsetof(mavlink_sys_status_t, onboard_control_sensors_health) }, \
{ "load", NULL, MAVLINK_TYPE_UINT16_T, 0, 12, offsetof(mavlink_sys_status_t, load) }, \
{ "voltage_battery", NULL, MAVLINK_TYPE_UINT16_T, 0, 14, offsetof(mavlink_sys_status_t, voltage_battery) }, \
{ "current_battery", NULL, MAVLINK_TYPE_INT16_T, 0, 16, offsetof(mavlink_sys_status_t, current_battery) }, \
{ "drop_rate_comm", NULL, MAVLINK_TYPE_UINT16_T, 0, 18, offsetof(mavlink_sys_status_t, drop_rate_comm) }, \
{ "errors_comm", NULL, MAVLINK_TYPE_UINT16_T, 0, 20, offsetof(mavlink_sys_status_t, errors_comm) }, \
{ "errors_count1", NULL, MAVLINK_TYPE_UINT16_T, 0, 22, offsetof(mavlink_sys_status_t, errors_count1) }, \
{ "errors_count2", NULL, MAVLINK_TYPE_UINT16_T, 0, 24, offsetof(mavlink_sys_status_t, errors_count2) }, \
{ "errors_count3", NULL, MAVLINK_TYPE_UINT16_T, 0, 26, offsetof(mavlink_sys_status_t, errors_count3) }, \
{ "errors_count4", NULL, MAVLINK_TYPE_UINT16_T, 0, 28, offsetof(mavlink_sys_status_t, errors_count4) }, \
{ "battery_remaining", NULL, MAVLINK_TYPE_INT8_T, 0, 30, offsetof(mavlink_sys_status_t, battery_remaining) }, \
} \
}
/**
* @brief Pack a sys_status message
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param msg The MAVLink message to compress the data into
*
* @param onboard_control_sensors_present Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param onboard_control_sensors_enabled Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param onboard_control_sensors_health Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
* @param voltage_battery Battery voltage, in millivolts (1 = 1 millivolt)
* @param current_battery Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current
* @param battery_remaining Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery
* @param drop_rate_comm Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
* @param errors_comm Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
* @param errors_count1 Autopilot-specific errors
* @param errors_count2 Autopilot-specific errors
* @param errors_count3 Autopilot-specific errors
* @param errors_count4 Autopilot-specific errors
* @return length of the message in bytes (excluding serial stream start sign)
*/
static inline uint16_t mavlink_msg_sys_status_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
uint32_t onboard_control_sensors_present, uint32_t onboard_control_sensors_enabled, uint32_t onboard_control_sensors_health, uint16_t load, uint16_t voltage_battery, int16_t current_battery, int8_t battery_remaining, uint16_t drop_rate_comm, uint16_t errors_comm, uint16_t errors_count1, uint16_t errors_count2, uint16_t errors_count3, uint16_t errors_count4)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[MAVLINK_MSG_ID_SYS_STATUS_LEN];
_mav_put_uint32_t(buf, 0, onboard_control_sensors_present);
_mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled);
_mav_put_uint32_t(buf, 8, onboard_control_sensors_health);
_mav_put_uint16_t(buf, 12, load);
_mav_put_uint16_t(buf, 14, voltage_battery);
_mav_put_int16_t(buf, 16, current_battery);
_mav_put_uint16_t(buf, 18, drop_rate_comm);
_mav_put_uint16_t(buf, 20, errors_comm);
_mav_put_uint16_t(buf, 22, errors_count1);
_mav_put_uint16_t(buf, 24, errors_count2);
_mav_put_uint16_t(buf, 26, errors_count3);
_mav_put_uint16_t(buf, 28, errors_count4);
_mav_put_int8_t(buf, 30, battery_remaining);
memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#else
mavlink_sys_status_t packet;
packet.onboard_control_sensors_present = onboard_control_sensors_present;
packet.onboard_control_sensors_enabled = onboard_control_sensors_enabled;
packet.onboard_control_sensors_health = onboard_control_sensors_health;
packet.load = load;
packet.voltage_battery = voltage_battery;
packet.current_battery = current_battery;
packet.drop_rate_comm = drop_rate_comm;
packet.errors_comm = errors_comm;
packet.errors_count1 = errors_count1;
packet.errors_count2 = errors_count2;
packet.errors_count3 = errors_count3;
packet.errors_count4 = errors_count4;
packet.battery_remaining = battery_remaining;
memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#endif
msg->msgid = MAVLINK_MSG_ID_SYS_STATUS;
#if MAVLINK_CRC_EXTRA
return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC);
#else
return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#endif
}
/**
* @brief Pack a sys_status message on a channel
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param chan The MAVLink channel this message will be sent over
* @param msg The MAVLink message to compress the data into
* @param onboard_control_sensors_present Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param onboard_control_sensors_enabled Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param onboard_control_sensors_health Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
* @param voltage_battery Battery voltage, in millivolts (1 = 1 millivolt)
* @param current_battery Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current
* @param battery_remaining Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery
* @param drop_rate_comm Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
* @param errors_comm Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
* @param errors_count1 Autopilot-specific errors
* @param errors_count2 Autopilot-specific errors
* @param errors_count3 Autopilot-specific errors
* @param errors_count4 Autopilot-specific errors
* @return length of the message in bytes (excluding serial stream start sign)
*/
static inline uint16_t mavlink_msg_sys_status_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
mavlink_message_t* msg,
uint32_t onboard_control_sensors_present,uint32_t onboard_control_sensors_enabled,uint32_t onboard_control_sensors_health,uint16_t load,uint16_t voltage_battery,int16_t current_battery,int8_t battery_remaining,uint16_t drop_rate_comm,uint16_t errors_comm,uint16_t errors_count1,uint16_t errors_count2,uint16_t errors_count3,uint16_t errors_count4)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[MAVLINK_MSG_ID_SYS_STATUS_LEN];
_mav_put_uint32_t(buf, 0, onboard_control_sensors_present);
_mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled);
_mav_put_uint32_t(buf, 8, onboard_control_sensors_health);
_mav_put_uint16_t(buf, 12, load);
_mav_put_uint16_t(buf, 14, voltage_battery);
_mav_put_int16_t(buf, 16, current_battery);
_mav_put_uint16_t(buf, 18, drop_rate_comm);
_mav_put_uint16_t(buf, 20, errors_comm);
_mav_put_uint16_t(buf, 22, errors_count1);
_mav_put_uint16_t(buf, 24, errors_count2);
_mav_put_uint16_t(buf, 26, errors_count3);
_mav_put_uint16_t(buf, 28, errors_count4);
_mav_put_int8_t(buf, 30, battery_remaining);
memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#else
mavlink_sys_status_t packet;
packet.onboard_control_sensors_present = onboard_control_sensors_present;
packet.onboard_control_sensors_enabled = onboard_control_sensors_enabled;
packet.onboard_control_sensors_health = onboard_control_sensors_health;
packet.load = load;
packet.voltage_battery = voltage_battery;
packet.current_battery = current_battery;
packet.drop_rate_comm = drop_rate_comm;
packet.errors_comm = errors_comm;
packet.errors_count1 = errors_count1;
packet.errors_count2 = errors_count2;
packet.errors_count3 = errors_count3;
packet.errors_count4 = errors_count4;
packet.battery_remaining = battery_remaining;
memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#endif
msg->msgid = MAVLINK_MSG_ID_SYS_STATUS;
#if MAVLINK_CRC_EXTRA
return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC);
#else
return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#endif
}
/**
* @brief Encode a sys_status struct
*
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param msg The MAVLink message to compress the data into
* @param sys_status C-struct to read the message contents from
*/
static inline uint16_t mavlink_msg_sys_status_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_sys_status_t* sys_status)
{
return mavlink_msg_sys_status_pack(system_id, component_id, msg, sys_status->onboard_control_sensors_present, sys_status->onboard_control_sensors_enabled, sys_status->onboard_control_sensors_health, sys_status->load, sys_status->voltage_battery, sys_status->current_battery, sys_status->battery_remaining, sys_status->drop_rate_comm, sys_status->errors_comm, sys_status->errors_count1, sys_status->errors_count2, sys_status->errors_count3, sys_status->errors_count4);
}
/**
* @brief Encode a sys_status struct on a channel
*
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param chan The MAVLink channel this message will be sent over
* @param msg The MAVLink message to compress the data into
* @param sys_status C-struct to read the message contents from
*/
static inline uint16_t mavlink_msg_sys_status_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_sys_status_t* sys_status)
{
return mavlink_msg_sys_status_pack_chan(system_id, component_id, chan, msg, sys_status->onboard_control_sensors_present, sys_status->onboard_control_sensors_enabled, sys_status->onboard_control_sensors_health, sys_status->load, sys_status->voltage_battery, sys_status->current_battery, sys_status->battery_remaining, sys_status->drop_rate_comm, sys_status->errors_comm, sys_status->errors_count1, sys_status->errors_count2, sys_status->errors_count3, sys_status->errors_count4);
}
/**
* @brief Send a sys_status message
* @param chan MAVLink channel to send the message
*
* @param onboard_control_sensors_present Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param onboard_control_sensors_enabled Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param onboard_control_sensors_health Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
* @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
* @param voltage_battery Battery voltage, in millivolts (1 = 1 millivolt)
* @param current_battery Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current
* @param battery_remaining Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery
* @param drop_rate_comm Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
* @param errors_comm Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
* @param errors_count1 Autopilot-specific errors
* @param errors_count2 Autopilot-specific errors
* @param errors_count3 Autopilot-specific errors
* @param errors_count4 Autopilot-specific errors
*/
#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
static inline void mavlink_msg_sys_status_send(mavlink_channel_t chan, uint32_t onboard_control_sensors_present, uint32_t onboard_control_sensors_enabled, uint32_t onboard_control_sensors_health, uint16_t load, uint16_t voltage_battery, int16_t current_battery, int8_t battery_remaining, uint16_t drop_rate_comm, uint16_t errors_comm, uint16_t errors_count1, uint16_t errors_count2, uint16_t errors_count3, uint16_t errors_count4)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[MAVLINK_MSG_ID_SYS_STATUS_LEN];
_mav_put_uint32_t(buf, 0, onboard_control_sensors_present);
_mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled);
_mav_put_uint32_t(buf, 8, onboard_control_sensors_health);
_mav_put_uint16_t(buf, 12, load);
_mav_put_uint16_t(buf, 14, voltage_battery);
_mav_put_int16_t(buf, 16, current_battery);
_mav_put_uint16_t(buf, 18, drop_rate_comm);
_mav_put_uint16_t(buf, 20, errors_comm);
_mav_put_uint16_t(buf, 22, errors_count1);
_mav_put_uint16_t(buf, 24, errors_count2);
_mav_put_uint16_t(buf, 26, errors_count3);
_mav_put_uint16_t(buf, 28, errors_count4);
_mav_put_int8_t(buf, 30, battery_remaining);
#if MAVLINK_CRC_EXTRA
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, buf, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC);
#else
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, buf, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#endif
#else
mavlink_sys_status_t packet;
packet.onboard_control_sensors_present = onboard_control_sensors_present;
packet.onboard_control_sensors_enabled = onboard_control_sensors_enabled;
packet.onboard_control_sensors_health = onboard_control_sensors_health;
packet.load = load;
packet.voltage_battery = voltage_battery;
packet.current_battery = current_battery;
packet.drop_rate_comm = drop_rate_comm;
packet.errors_comm = errors_comm;
packet.errors_count1 = errors_count1;
packet.errors_count2 = errors_count2;
packet.errors_count3 = errors_count3;
packet.errors_count4 = errors_count4;
packet.battery_remaining = battery_remaining;
#if MAVLINK_CRC_EXTRA
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)&packet, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC);
#else
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)&packet, MAVLINK_MSG_ID_SYS_STATUS_LEN);
#endif
#endif
}
#endif
// MESSAGE SYS_STATUS UNPACKING
/**
* @brief Get field onboard_control_sensors_present from sys_status message
*
* @return Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
*/
static inline uint32_t mavlink_msg_sys_status_get_onboard_control_sensors_present(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint32_t(msg, 0);
}
/**
* @brief Get field onboard_control_sensors_enabled from sys_status message
*
* @return Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
*/
static inline uint32_t mavlink_msg_sys_status_get_onboard_control_sensors_enabled(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint32_t(msg, 4);
}
/**
* @brief Get field onboard_control_sensors_health from sys_status message
*
* @return Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices: 0: 3D gyro, 1: 3D acc, 2: 3D mag, 3: absolute pressure, 4: differential pressure, 5: GPS, 6: optical flow, 7: computer vision position, 8: laser based position, 9: external ground-truth (Vicon or Leica). Controllers: 10: 3D angular rate control 11: attitude stabilization, 12: yaw position, 13: z/altitude control, 14: x/y position control, 15: motor outputs / control
*/
static inline uint32_t mavlink_msg_sys_status_get_onboard_control_sensors_health(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint32_t(msg, 8);
}
/**
* @brief Get field load from sys_status message
*
* @return Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000
*/
static inline uint16_t mavlink_msg_sys_status_get_load(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 12);
}
/**
* @brief Get field voltage_battery from sys_status message
*
* @return Battery voltage, in millivolts (1 = 1 millivolt)
*/
static inline uint16_t mavlink_msg_sys_status_get_voltage_battery(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 14);
}
/**
* @brief Get field current_battery from sys_status message
*
* @return Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current
*/
static inline int16_t mavlink_msg_sys_status_get_current_battery(const mavlink_message_t* msg)
{
return _MAV_RETURN_int16_t(msg, 16);
}
/**
* @brief Get field battery_remaining from sys_status message
*
* @return Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery
*/
static inline int8_t mavlink_msg_sys_status_get_battery_remaining(const mavlink_message_t* msg)
{
return _MAV_RETURN_int8_t(msg, 30);
}
/**
* @brief Get field drop_rate_comm from sys_status message
*
* @return Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
*/
static inline uint16_t mavlink_msg_sys_status_get_drop_rate_comm(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 18);
}
/**
* @brief Get field errors_comm from sys_status message
*
* @return Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)
*/
static inline uint16_t mavlink_msg_sys_status_get_errors_comm(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 20);
}
/**
* @brief Get field errors_count1 from sys_status message
*
* @return Autopilot-specific errors
*/
static inline uint16_t mavlink_msg_sys_status_get_errors_count1(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 22);
}
/**
* @brief Get field errors_count2 from sys_status message
*
* @return Autopilot-specific errors
*/
static inline uint16_t mavlink_msg_sys_status_get_errors_count2(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 24);
}
/**
* @brief Get field errors_count3 from sys_status message
*
* @return Autopilot-specific errors
*/
static inline uint16_t mavlink_msg_sys_status_get_errors_count3(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 26);
}
/**
* @brief Get field errors_count4 from sys_status message
*
* @return Autopilot-specific errors
*/
static inline uint16_t mavlink_msg_sys_status_get_errors_count4(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 28);
}
/**
* @brief Decode a sys_status message into a struct
*
* @param msg The message to decode
* @param sys_status C-struct to decode the message contents into
*/
static inline void mavlink_msg_sys_status_decode(const mavlink_message_t* msg, mavlink_sys_status_t* sys_status)
{
#if MAVLINK_NEED_BYTE_SWAP
sys_status->onboard_control_sensors_present = mavlink_msg_sys_status_get_onboard_control_sensors_present(msg);
sys_status->onboard_control_sensors_enabled = mavlink_msg_sys_status_get_onboard_control_sensors_enabled(msg);
sys_status->onboard_control_sensors_health = mavlink_msg_sys_status_get_onboard_control_sensors_health(msg);
sys_status->load = mavlink_msg_sys_status_get_load(msg);
sys_status->voltage_battery = mavlink_msg_sys_status_get_voltage_battery(msg);
sys_status->current_battery = mavlink_msg_sys_status_get_current_battery(msg);
sys_status->drop_rate_comm = mavlink_msg_sys_status_get_drop_rate_comm(msg);
sys_status->errors_comm = mavlink_msg_sys_status_get_errors_comm(msg);
sys_status->errors_count1 = mavlink_msg_sys_status_get_errors_count1(msg);
sys_status->errors_count2 = mavlink_msg_sys_status_get_errors_count2(msg);
sys_status->errors_count3 = mavlink_msg_sys_status_get_errors_count3(msg);
sys_status->errors_count4 = mavlink_msg_sys_status_get_errors_count4(msg);
sys_status->battery_remaining = mavlink_msg_sys_status_get_battery_remaining(msg);
#else
memcpy(sys_status, _MAV_PAYLOAD(msg), MAVLINK_MSG_ID_SYS_STATUS_LEN);
#endif
}
|