1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
|
/****************************************************************************
* configs/fire-stm32v2/src/up_enc28j60.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* 2MBit SPI FLASH OR ENC28J60
*
* --- ------ -------------- -----------------------------------------------------
* PIN NAME SIGNAL NOTES
* --- ------ -------------- -----------------------------------------------------
*
* 29 PA4 PA4-SPI1-NSS 10Mbit ENC28J60, SPI 2M FLASH
* 30 PA5 PA5-SPI1-SCK 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 31 PA6 PA6-SPI1-MISO 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 32 PA7 PA7-SPI1-MOSI 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdio.h>
#include <debug.h>
#include <nuttx/spi.h>
#include <nuttx/net/enc28j60.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "fire-internal.h"
#ifdef CONFIG_ENC28J60
/****************************************************************************
* Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* ENC28J60
*
* --- ------ -------------- -----------------------------------------------------
* PIN NAME SIGNAL NOTES
* --- ------ -------------- -----------------------------------------------------
*
* 29 PA4 PA4-SPI1-NSS 10Mbit ENC28J60, SPI 2M FLASH
* 30 PA5 PA5-SPI1-SCK 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 31 PA6 PA6-SPI1-MISO 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 32 PA7 PA7-SPI1-MOSI 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
* 98 PE1 PE1-FSMC_NBL1 2.4" TFT + Touchscreen, 10Mbit EN28J60 Reset
* 4 PE5 (no name) 10Mbps ENC28J60 Interrupt
*/
/* ENC28J60 is on SPI1 */
#ifndef CONFIG_STM32_SPI1
# error "Need CONFIG_STM32_SPI1 in the configuration"
#endif
/* SPI Assumptions **********************************************************/
#define ENC28J60_SPI_PORTNO 1 /* On SPI1 */
#define ENC28J60_DEVNO 0 /* Only one ENC28J60 */
/****************************************************************************
* Private Types
****************************************************************************/
struct stm32_lower_s
{
const struct enc_lower_s lower; /* Low-level MCU interface */
xcpt_t handler; /* ENC28J60 interrupt handler */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int up_attach(FAR const struct enc_lower_s *lower, xcpt_t handler);
static void up_enable(FAR const struct enc_lower_s *lower);
static void up_disable(FAR const struct enc_lower_s *lower);
/****************************************************************************
* Private Data
****************************************************************************/
/* The ENC28J60 normal provides interrupts to the MCU via a GPIO pin. The
* following structure provides an MCU-independent mechanixm for controlling
* the ENC28J60 GPIO interrupt.
*/
static struct stm32_lower_s g_enclower =
{
.lower =
{
.attach = up_attach,
.enable = up_enable,
.disable = up_disable
},
.handler = NULL,
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: struct enc_lower_s methods
****************************************************************************/
static int up_attach(FAR const struct enc_lower_s *lower, xcpt_t handler)
{
FAR struct stm32_lower_s *priv = (FAR struct stm32_lower_s *)lower;
/* Just save the handler for use when the interrupt is enabled */
priv->handler = handler;
return OK;
}
static void up_enable(FAR const struct enc_lower_s *lower)
{
FAR struct stm32_lower_s *priv = (FAR struct stm32_lower_s *)lower;
DEBUGASSERT(priv->handler);
(void)stm32_gpiosetevent(GPIO_ENC28J60_INTR, true, true, true, priv->handler);
}
static void up_disable(FAR const struct enc_lower_s *lower)
{
(void)stm32_gpiosetevent(GPIO_ENC28J60_INTR, true, true, true, NULL);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_netinitialize
****************************************************************************/
void up_netinitialize(void)
{
FAR struct spi_dev_s *spi;
int ret;
/* Assumptions:
* 1) ENC28J60 pins were configured in up_spi.c early in the boot-up phase.
* 2) Clocking for the SPI1 peripheral was also provided earlier in boot-up.
*/
spi = up_spiinitialize(ENC28J60_SPI_PORTNO);
if (!spi)
{
nlldbg("Failed to initialize SPI port %d\n", ENC28J60_SPI_PORTNO);
return;
}
/* Take ENC28J60 out of reset (active low)*/
stm32_gpiowrite(GPIO_ENC28J60_RESET, true);
/* Bind the SPI port to the ENC28J60 driver */
ret = enc_initialize(spi, &g_enclower.lower, ENC28J60_DEVNO);
if (ret < 0)
{
nlldbg("Failed to bind SPI port %d ENC28J60 device %d: %d\n",
ENC28J60_SPI_PORTNO, ENC28J60_DEVNO, ret);
return;
}
nllvdbg("Bound SPI port %d to ENC28J60 device %d\n",
ENC28J60_SPI_PORTNO, ENC28J60_DEVNO);
}
#endif /* CONFIG_ENC28J60 */
|
