1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
|
/************************************************************************************
* configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
* arch/arm/src/board/lpc1766stk_internal.n
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
#define _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* LPC1766-STK GPIO Pin Definitions *************************************************/
/* Board GPIO Usage:
*
* GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[0]/RD1/TXD3/SDA1 46 RD1
* P0[1]/TD1/RXD3/SCL1 47 TD1
* P0[2]/TXD0/AD0[7] 98 TXD0
* P0[3]/RXD0/AD0[6] 99 RXD0
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
* P0[10]/TXD2/SDA2/MAT3[0] 48 SDA2
* P0[11]/RXD2/SCL2/MAT3[1] 49 SCL2
* P0[15]/TXD1/SCK0/SCK 62 TXD1
* P0[16]/RXD1/SSEL0/SSEL 63 RXD1
* P0[17]/CTS1/MISO0/MISO 61 CTS1
* P0[18]/DCD1/MOSI0/MOSI 60 DCD1
* P0[19]/DSR1/SDA1 59 DSR1
* P0[20]/DTR1/SCL1 58 DTR1
* P0[21]/RI1/RD1 57 MMC PWR
* P0[22]/RTS1/TD1 56 RTS1
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
* P0[26]/AD0[3]/AOUT/RXD3 6 AOUT
* P0[27]/SDA0/USB_SDA 25 USB_SDA
* P0[28]/SCL0/USB_SCL 24 USB_SCL
* P0[29]/USB_D+ 29 USB_D+
* P0[30]/USB_D- 30 USB_D-
* P1[0]/ENET_TXD0 95 E_TXD0
* P1[1]/ENET_TXD1 94 E_TXD1
* P1[4]/ENET_TX_EN 93 E_TX_EN
* P1[8]/ENET_CRS 92 E_CRS
* P1[9]/ENET_RXD0 91 E_RXD0
* P1[10]/ENET_RXD1 90 E_RXD1
* P1[14]/ENET_RX_ER 89 E_RX_ER
* P1[15]/ENET_REF_CLK 88 E_REF_CLK
* P1[16]/ENET_MDC 87 E_MDC
* P1[17]/ENET_MDIO 86 E_MDIO
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] 32 USB_UP_LED
* P1[19]/MC0A/#USB_PPWR/CAP1[1] 33 #USB_PPWR
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
* P1[22]/MC0B/USB_PWRD/MAT1[0] 36 USBH_PWRD
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
* P1[25]/MC1A/MAT1[1] 39 LED1
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
* P1[27]/CLKOUT/#USB_OVRCR/CAP0[1] 43 #USB_OVRCR
* P1[28]/MC2A/PCAP1[0]/MAT0[0] 44 P1.28
* P1[29]/MC2B/PCAP1[1]/MAT0[1] 45 P1.29
* P1[30]/VBUS/AD0[4] 21 VBUS
* P1[31]/SCK1/AD0[5] 20 AIN5
* P2[0]/PWM1[1]/TXD1 75 UP
* P2[1]/PWM1[2]/RXD1 74 DOWN
* P2[2]/PWM1[3]/CTS1/TRACEDATA[3] 73 TRACE_D3
* P2[3]/PWM1[4]/DCD1/TRACEDATA[2] 70 TRACE_D2
* P2[4]/PWM1[5]/DSR1/TRACEDATA[1] 69 TRACE_D1
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] 68 TRACE_D0
* P2[6]/PCAP1[0]/RI1/TRACECLK 67 TRACE_CLK
* P2[7]/RD2/RTS1 66 LEFT
* P2[8]/TD2/TXD2 65 RIGHT
* P2[9]/USB_CONNECT/RXD2 64 USBD_CONNECT
* P2[10]/#EINT0/NMI 53 ISP_E4
* P2[11]/#EINT1/I2STX_CLK 52 #EINT1
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL
*/
/* LEDs GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P1[25]/MC1A/MAT1[1] 39 LED1
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
*
* LEDs are connected to +3.3V through a diode on one side and must be pulled
* low (through a resistor) on the LPC17xx side in order to illuminuate them.
*/
#define LPC1766STK_LED1 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN25)
#define LPC1766STK_LED2 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN4)
/* Buttons GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
*
* NOTES:
* 1. Pull-ups are not required because the pins are already pulled-up by
* through resistors on the board.
* 2. All buttons are capable of supporting interrupts if up_irqbutton() is
* called to attach an interrupt handler. Interrupts are configured to
* occur on both edges.
*/
#define LPC1766STK_BUT1 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN23)
#define LPC1766STK_BUT2 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN13)
#define LPC1766STK_WAKEUP (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN12)
/* Button IRQ numbers */
#define LPC1766STK_BUT1_IRQ LPC17_IRQ_P0p23
#define LPC1766STK_BUT2_IRQ LPC17_IRQ_P2p13
#define LPC1766STK_WAKEUP_IRQ LPC17_IRQ_P2p12
/* Joystick GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
* P2[0]/PWM1[1]/TXD1 75 UP
* P2[1]/PWM1[2]/RXD1 74 DOWN
* P2[7]/RD2/RTS1 66 LEFT
* P2[8]/TD2/TXD2 65 RIGHT
*
* NOTES:
* 1. Pull-ups are not required because the pins are already pulled-up by
* through resistors on the board.
* 2. All buttons are capable of supporting interrupts if up_irqbutton() is
* called to attach an interrupt handler. Interrupts are configured to
* occur on both edges.
*/
#define LPC1766STK_CENTER (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN5)
#define LPC1766STK_UP (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN0)
#define LPC1766STK_DOWN (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN1)
#define LPC1766STK_LEFT (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN7)
#define LPC1766STK_RIGHT (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN8)
/* Joystick IRQ numbers */
#define LPC1766STK_CENTER_IRQ LPC17_IRQ_P0p5
#define LPC1766STK_UP_IRQ LPC17_IRQ_P2p0
#define LPC1766STK_DOWN_IRQ LPC17_IRQ_P2p1
#define LPC1766STK_LEFT_IRQ LPC17_IRQ_P2p7
#define LPC1766STK_RIGHT_IRQ LPC17_IRQ_P2p8
/* Nokia LCD GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL (PWM1)
*/
#define LPC1766STK_LCD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN21)
#define LPC1766STK_LCD_RST (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT3 | GPIO_PIN25)
#define LPC1766STK_LCD_BL GPIO_PWM1p3_3
#define GPIO_PWM1p3 GPIO_PWM1p3_3
/* SD/MMC GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1 (active low)
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
* P0[21]/RI1/RD1 57 MMC PWR (active low)
*/
#define LPC1766STK_MMC_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN6)
#define LPC1766STK_MMC_PWR (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
/* AD GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
*/
#define LPC1766STK_TEMP GPIO_AD0p1
#define LPC1766STK_MIC_IN GPIO_AD0p2
/* UEXT GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
*/
#define LPC1766STK_CS_UEXT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN26)
/* ISP? GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P2[10]/#EINT0/NMI 53 ISP_E4
*/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public data
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc17_sspinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Olimex LPC1766-STK board.
*
************************************************************************************/
void weak_function lpc17_sspinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */
|