1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
|
/****************************************************************************
*
* Copyright (c) 2013 PX4 Development Team. All rights reserved.
* Author: Lorenz Meier <lm@inf.ethz.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file fw_pos_control_l1_params.c
*
* Parameters defined by the L1 position control task
*
* @author Lorenz Meier <lm@inf.ethz.ch>
*/
#include <nuttx/config.h>
#include <systemlib/param/param.h>
//XXX resolve unclear naming of paramters: FW_P_P --> FW_PR_P
/*
* Controller parameters, accessible via MAVLink
*
*/
// @DisplayName Attitude Time Constant
// @Description This defines the latency between a step input and the achieved setpoint. Half a second is a good start value and fits for most average systems. Smaller systems may require smaller values, but as this will wear out servos faster, the value should only be decreased as needed.
// @Range 0.4 to 1.0 seconds, in tens of seconds
PARAM_DEFINE_FLOAT(FW_ATT_TC, 0.5f);
// @DisplayName Proportional gain.
// @Description This defines how much the elevator input will be commanded dependend on the current pitch error.
// @Range 10 to 200, 1 increments
PARAM_DEFINE_FLOAT(FW_P_P, 40.0f);
// @DisplayName Damping gain.
// @Description This gain damps the airframe pitch rate. In particular relevant for flying wings.
// @Range 0.0 to 10.0, 0.1 increments
PARAM_DEFINE_FLOAT(FW_P_D, 0.0f);
// @DisplayName Integrator gain.
// @Description This gain defines how much control response will result out of a steady state error. It trims any constant error.
// @Range 0 to 50.0
PARAM_DEFINE_FLOAT(FW_P_I, 0.0f);
// @DisplayName Maximum positive / up pitch rate.
// @Description This limits the maximum pitch up angular rate the controller will output (in degrees per second). Setting a value of zero disables the limit.
// @Range 0 to 90.0 degrees per seconds, in 1 increments
PARAM_DEFINE_FLOAT(FW_P_RMAX_POS, 0.0f);
// @DisplayName Maximum negative / down pitch rate.
// @Description This limits the maximum pitch down up angular rate the controller will output (in degrees per second). Setting a value of zero disables the limit.
// @Range 0 to 90.0 degrees per seconds, in 1 increments
PARAM_DEFINE_FLOAT(FW_P_RMAX_NEG, 0.0f);
// @DisplayName Pitch Integrator Anti-Windup
// @Description This limits the range in degrees the integrator can wind up to.
// @Range 0.0 to 45.0
// @Increment 1.0
PARAM_DEFINE_FLOAT(FW_P_IMAX, 15.0f);
// @DisplayName Roll feedforward gain.
// @Description This compensates during turns and ensures the nose stays level.
// @Range 0.5 2.0
// @Increment 0.05
// @User User
PARAM_DEFINE_FLOAT(FW_P_ROLLFF, 1.0f);
// @DisplayName Proportional Gain.
// @Description This gain controls the roll angle to roll actuator output.
// @Range 10.0 200.0
// @Increment 10.0
// @User User
PARAM_DEFINE_FLOAT(FW_R_P, 40.0f);
// @DisplayName Damping Gain
// @Description Controls the roll rate to roll actuator output. It helps to reduce motions in turbulence.
// @Range 0.0 10.0
// @Increment 1.0
// @User User
PARAM_DEFINE_FLOAT(FW_R_D, 0.0f);
// @DisplayName Integrator Gain
// @Description This gain controls the contribution of the integral to roll actuator outputs. It trims out steady state errors.
// @Range 0.0 100.0
// @Increment 5.0
// @User User
PARAM_DEFINE_FLOAT(FW_R_I, 0.0f);
// @DisplayName Roll Integrator Anti-Windup
// @Description This limits the range in degrees the integrator can wind up to.
// @Range 0.0 to 45.0
// @Increment 1.0
PARAM_DEFINE_FLOAT(FW_R_IMAX, 15.0f);
// @DisplayName Maximum Roll Rate
// @Description This limits the maximum roll rate the controller will output (in degrees per second). Setting a value of zero disables the limit.
// @Range 0 to 90.0 degrees per seconds
// @Increment 1.0
PARAM_DEFINE_FLOAT(FW_R_RMAX, 60);
PARAM_DEFINE_FLOAT(FW_Y_P, 0);
PARAM_DEFINE_FLOAT(FW_Y_I, 0);
PARAM_DEFINE_FLOAT(FW_Y_IMAX, 15.0f);
PARAM_DEFINE_FLOAT(FW_Y_D, 0);
PARAM_DEFINE_FLOAT(FW_Y_ROLLFF, 0);
PARAM_DEFINE_FLOAT(FW_AIRSPD_MIN, 9.0f);
PARAM_DEFINE_FLOAT(FW_AIRSPD_TRIM, 12.0f);
PARAM_DEFINE_FLOAT(FW_AIRSPD_MAX, 18.0f);
PARAM_DEFINE_FLOAT(FW_Y_RMAX, 60);
PARAM_DEFINE_FLOAT(FW_Y_COORD, 1.0f);
|