/****************************************************************************
* apps/builtin/exec_builtin.c
*
* Originally by:
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Author: Uros Platise <uros.platise@isotel.eu>
*
* With subsequent updates, modifications, and general maintenance by:
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/wait.h>
#include <sched.h>
#include <string.h>
#include <fcntl.h>
#include <semaphore.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/binfmt/builtin.h>
#include <apps/builtin.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_BUILTIN_PROXY_STACKSIZE
# define CONFIG_BUILTIN_PROXY_STACKSIZE 1024
#endif
/****************************************************************************
* Private Types
****************************************************************************/
struct builtin_parms_s
{
/* Input values */
FAR const char *redirfile;
FAR const char **argv;
int oflags;
int index;
/* Returned values */
pid_t result;
int errcode;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
static sem_t g_builtin_parmsem = SEM_INITIALIZER(1);
#ifndef CONFIG_SCHED_WAITPID
static sem_t g_builtin_execsem = SEM_INITIALIZER(0);
#endif
static struct builtin_parms_s g_builtin_parms;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: bultin_semtake and builtin_semgive
*
* Description:
* Give and take semaphores
*
* Input Parameters:
*
* sem - The semaphore to act on.
*
* Returned Value:
* None
*
****************************************************************************/
static void bultin_semtake(FAR sem_t *sem)
{
int ret;
do
{
ret = sem_wait(sem);
ASSERT(ret == 0 || errno == EINTR);
}
while (ret != 0);
}
#define builtin_semgive(sem) sem_post(sem)
/****************************************************************************
* Name: builtin_taskcreate
*
* Description:
* Execute the builtin task
*
* Returned Value:
* On success, the task ID of the builtin task is returned; On failure, -1
* (ERROR) is returned and the errno is set appropriately.
*
****************************************************************************/
static int builtin_taskcreate(int index, FAR const char **argv)
{
FAR const struct builtin_s *b;
int ret;
b = builtin_for_index(index);
if (b == NULL)
{
errno = ENOENT;
return ERROR;
}
/* Disable pre-emption. This means that although we start the builtin
* application here, it will not actually run until pre-emption is
* re-enabled below.
*/
sched_lock();
/* Start the builtin application task */
ret = TASK_CREATE(b->name, b->priority, b->stacksize, b->main,
(argv) ? &argv[1] : (FAR const char **)NULL);
/* If robin robin scheduling is enabled, then set the scheduling policy
* of the new task to SCHED_RR before it has a chance to run.
*/
#if CONFIG_RR_INTERVAL > 0
if (ret > 0)
{
struct sched_param param;
/* Pre-emption is disabled so the task creation and the
* following operation will be atomic. The priority of the
* new task cannot yet have changed from its initial value.
*/
param.sched_priority = b->priority;
(void)sched_setscheduler(ret, SCHED_RR, ¶m);
}
#endif
/* Now let the builtin application run */
sched_unlock();
/* Return the task ID of the new task if the task was sucessfully
* started. Otherwise, ret will be ERROR (and the errno value will
* be set appropriately).
*/
return ret;
}
/****************************************************************************
* Name: builtin_proxy
*
* Description:
* Perform output redirection, then execute the builtin task.
*
* Input Parameters:
* Standard task start-up parameters
*
* Returned Value:
* Standard task return value.
*
****************************************************************************/
static int builtin_proxy(int argc, char *argv[])
{
int fd;
int ret = ERROR;
/* Open the output file for redirection */
svdbg("Open'ing redirfile=%s oflags=%04x mode=0644\n",
g_builtin_parms.redirfile, g_builtin_parms.oflags);
fd = open(g_builtin_parms.redirfile, g_builtin_parms.oflags, 0644);
if (fd < 0)
{
/* Remember the errno value. ret is already set to ERROR */
g_builtin_parms.errcode = errno;
sdbg("ERROR: open of %s failed: %d\n",
g_builtin_parms.redirfile, g_builtin_parms.errcode);
}
/* Does the return file descriptor happen to match the required file
* desciptor number?
*/
else if (fd != 1)
{
/* No.. dup2 to get the correct file number */
svdbg("Dup'ing %d->1\n", fd);
ret = dup2(fd, 1);
if (ret < 0)
{
g_builtin_parms.errcode = errno;
sdbg("ERROR: dup2 failed: %d\n", g_builtin_parms.errcode);
}
svdbg("Closing fd=%d\n", fd);
close(fd);
}
/* Was the setup successful? */
if (ret == OK)
{
/* Yes.. Start the task. On success, the task ID of the builtin task
* is returned; On failure, -1 (ERROR) is returned and the errno
* is set appropriately.
*/
ret = builtin_taskcreate(g_builtin_parms.index, g_builtin_parms.argv);
if (ret < 0)
{
g_builtin_parms.errcode = errno;
sdbg("ERROR: builtin_taskcreate failed: %d\n",
g_builtin_parms.errcode);
}
}
/* Post the semaphore to inform the parent task that we have completed
* what we need to do.
*/
g_builtin_parms.result = ret;
#ifndef CONFIG_SCHED_WAITPID
builtin_semgive(&g_builtin_execsem);
#endif
return 0;
}
/****************************************************************************
* Name: builtin_startproxy
*
* Description:
* Perform output redirection, then execute the builtin task.
*
* Input Parameters:
* Standard task start-up parameters
*
* Returned Value:
* On success, the task ID of the builtin task is returned; On failure, -1
* (ERROR) is returned and the errno is set appropriately.
*
****************************************************************************/
static inline int builtin_startproxy(int index, FAR const char **argv,
FAR const char *redirfile, int oflags)
{
struct sched_param param;
pid_t proxy;
int errcode;
#ifdef CONFIG_SCHED_WAITPID
int status;
#endif
int ret;
svdbg("index=%d argv=%p redirfile=%s oflags=%04x\n",
index, argv, redirfile, oflags);
/* We will have to go through an intermediary/proxy task in order to
* perform the I/O redirection. This would be a natural place to fork().
* However, true fork() behavior requires an MMU and most implementations
* of vfork() are not capable of these operations.
*
* Even without fork(), we can still do the job, but parameter passing is
* messier. Unfortunately, there is no (clean) way to pass binary values
* as a task parameter, so we will use a semaphore-protected global
* structure.
*/
/* Get exclusive access to the global parameter structure */
bultin_semtake(&g_builtin_parmsem);
/* Populate the parameter structure */
g_builtin_parms.redirfile = redirfile;
g_builtin_parms.argv = argv;
g_builtin_parms.result = ERROR;
g_builtin_parms.oflags = oflags;
g_builtin_parms.index = index;
/* Get the priority of this (parent) task */
ret = sched_getparam(0, ¶m);
if (ret < 0)
{
errcode = errno;
sdbg("ERROR: sched_getparam failed: %d\n", errcode);
goto errout;
}
/* Start the intermediary/proxy task at the same priority as the parent task. */
proxy = TASK_CREATE("builtin_proxy", param.sched_priority,
CONFIG_BUILTIN_PROXY_STACKSIZE, (main_t)builtin_proxy,
(FAR const char **)NULL);
if (proxy < 0)
{
errcode = errno;
sdbg("ERROR: Failed to start builtin_proxy: %d\n", errcode);
goto errout;
}
/* Wait for the proxy to complete its job. We could use waitpid()
* for this.
*/
#ifdef CONFIG_SCHED_WAITPID
ret = waitpid(proxy, &status, 0);
if (ret < 0)
{
sdbg("ERROR: waitpid() failed: %d\n", errno);
}
#else
bultin_semtake(&g_builtin_execsem);
#endif
/* Get the result and relinquish our access to the parameter structure */
set_errno(g_builtin_parms.errcode);
builtin_semgive(&g_builtin_parmsem);
return g_builtin_parms.result;
errout:
set_errno(errcode);
builtin_semgive(&g_builtin_parmsem);
return ERROR;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: exec_builtin
*
* Description:
* Executes builtin applications registered during 'make context' time.
* New application is run in a separate task context (and thread).
*
* Input Parameter:
* filename - Name of the linked-in binary to be started.
* argv - Argument list
* redirfile - If output if redirected, this parameter will be non-NULL
* and will provide the full path to the file.
* oflags - If output is redirected, this parameter will provide the
* open flags to use. This will support file replacement
* of appending to an existing file.
*
* Returned Value:
* This is an end-user function, so it follows the normal convention:
* Returns the PID of the exec'ed module. On failure, it.returns
* -1 (ERROR) and sets errno appropriately.
*
****************************************************************************/
int exec_builtin(FAR const char *appname, FAR const char **argv,
FAR const char *redirfile, int oflags)
{
int index;
int ret = ERROR;
/* Verify that an application with this name exists */
index = builtin_isavail(appname);
if (index >= 0)
{
/* Is output being redirected? */
if (redirfile)
{
ret = builtin_startproxy(index, argv, redirfile, oflags);
}
else
{
/* Start the builtin application task */
ret = builtin_taskcreate(index, argv);
}
}
/* Return the task ID of the new task if the task was sucessfully
* started. Otherwise, ret will be ERROR (and the errno value will
* be set appropriately).
*/
return ret;
}