/****************************************************************************
* drivers/usbhost/rtl8187x_rtl8187.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Authors: Rafael Noronha <rafael@pdsolucoes.com.br>
* Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Portions of the logic in this file derives from the KisMAC RTL8187x driver
*
* Created by pr0gg3d on 02/24/08.
*
* Which, in turn, came frm the SourceForge rt2x00 project:
*
* Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
* <http://rt2x00.serialmonkey.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* There are probably also pieces from the Linux RTL8187x driver
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
*
* Based on the r8187 driver, which is:
* Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <semaphore.h>
#include <time.h>
#include <wdog.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/fs.h>
#include <nuttx/arch.h>
#include <nuttx/wqueue.h>
#include <nuttx/irq.h>
#include <nuttx/usb/usb.h>
#include <nuttx/usb/usbhost.h>
#include <net/uip/uip.h>
#include <net/uip/uip-arp.h>
#include <net/uip/uip-arch.h>
#include "rtl8187x.h"
#if defined(CONFIG_USBHOST) && defined(CONFIG_NET) && defined(CONFIG_NET_WLAN)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_SCHED_WORKQUEUE
# warning "Worker thread support is required (CONFIG_SCHED_WORKQUEUE)"
#endif
/* Driver support ***********************************************************/
/* This format is used to construct the /dev/wlan[n] device driver path. It
* defined here so that it will be used consistently in all places.
*/
#define DEV_FORMAT "/dev/wlan%c"
#define DEV_NAMELEN 12
/* Used in rtl8187x_cfgdesc() */
#define USBHOST_IFFOUND 0x01
#define USBHOST_BINFOUND 0x02
#define USBHOST_BOUTFOUND 0x04
#define USBHOST_ALLFOUND 0x07
#define USBHOST_MAX_CREFS 0x7fff
/* TX poll delay = 1 seconds. CLK_TCK is the number of clock ticks per second */
#define RTL8187X_WDDELAY (1*CLK_TCK)
#define RTL8187X_POLLHSEC (1*2)
/* TX timeout = 1 minute */
#define RTL8187X_TXTIMEOUT (60*CLK_TCK)
/* This is a helper pointer for accessing the contents of the WLAN header */
#define BUF ((struct uip_eth_hdr *)priv->ethdev.d_buf)
/****************************************************************************
* Private Types
****************************************************************************/
/* Describes one IEEE 802.11 Channel */
struct ieee80211_channel_s
{
uint16_t chan; /* Channel number (IEEE 802.11) */
uint16_t freq; /* Frequency in MHz */
uint32_t val; /* HW specific value for the channel */
uint32_t flag; /* Flag for hostapd use (IEEE80211_CHAN_*) */
uint8_t pwrlevel;
uint8_t antmax;
};
/* This structure contains the internal, private state of the USB host class
* driver.
*/
struct rtl8187x_state_s
{
/* This is the externally visible portion of the USB class state */
struct usbhost_class_s class;
/* This is an instance of the USB host controller driver bound to this class instance */
struct usbhost_driver_s *drvr;
/* The following fields support the USB class driver */
char devchar; /* Character identifying the /dev/wlan[n] device */
volatile bool disconnected; /* TRUE: Device has been disconnected */
bool bifup; /* TRUE: Ethernet interface is up */
uint8_t ifno; /* Interface number */
int16_t crefs; /* Reference count on the driver instance */
sem_t exclsem; /* Used to maintain mutual exclusive access */
struct work_s work; /* For interacting with the worker thread */
FAR struct usb_ctrlreq_s *ctrlreq; /* The allocated request buffer */
FAR uint8_t *tbuffer; /* The allocated transfer buffer */
size_t tbuflen; /* Size of the allocated transfer buffer */
usbhost_ep_t epin; /* IN endpoint */
usbhost_ep_t epout; /* OUT endpoint */
WDOG_ID txpoll; /* Ethernet TX poll timer */
WDOG_ID txtimeout; /* Ethernet TX timeout timer */
/* RTL8187-specific information */
FAR struct rtl8187x_csr_s *map;
void (*rfinit)(FAR struct rtl8187x_state_s *);
void (*settxpower)(FAR struct rtl8187x_state_s *priv, int channel);
int mode;
int if_id;
struct ieee80211_channel_s channels[RTL8187X_NCHANNELS];
uint32_t rx_conf;
uint16_t txpwr_base;
uint8_t asicrev;
/* EEPROM fields (only really needed initially) */
uint8_t width; /* EEPROM width (see PCI_EEPROM_WIDTH_* defines) */
uint8_t datain; /* Register field to indicate data input */
uint8_t dataout; /* Register field to indicate data output */
uint8_t dataclk; /* Register field to set the data clock */
uint8_t chipsel; /* Register field to set the chip select */
/* This holds the information visible to uIP/NuttX */
struct uip_driver_s ethdev; /* Interface understood by uIP */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* General Utility Functions ************************************************/
/* Semaphores */
static void rtl8187x_takesem(sem_t *sem);
#define rtl8187x_givesem(s) sem_post(s);
/* Memory allocation services */
static inline FAR struct rtl8187x_state_s *rtl8187x_allocclass(void);
static inline void rtl8187x_freeclass(FAR struct rtl8187x_state_s *class);
/* Device name management */
static int rtl8187x_allocdevno(FAR struct rtl8187x_state_s *priv);
static void rtl8187x_freedevno(FAR struct rtl8187x_state_s *priv);
static inline void rtl8187x_mkdevname(FAR struct rtl8187x_state_s *priv, char *devname);
/* Standard USB host class functions ****************************************/
/* Worker thread actions */
static void rtl8187x_destroy(FAR void *arg);
/* Helpers for rtl8187x_connect() */
static inline int rtl8187x_cfgdesc(FAR struct rtl8187x_state_s *priv,
FAR const uint8_t *configdesc, int desclen,
uint8_t funcaddr);
static inline int rtl8187x_devinit(FAR struct rtl8187x_state_s *priv);
/* (Little Endian) Data helpers */
static inline uint16_t rtl8187x_host2le16(uint16_t val);
static inline uint32_t rtl8187x_host2le32(uint32_t val);
static inline uint16_t rtl8187x_getle16(const uint8_t *val);
static inline uint32_t rtl8187x_getle32(const uint8_t *val);
static inline void rtl8187x_putle16(uint8_t *dest, uint16_t val);
static void rtl8187x_putle32(uint8_t *dest, uint32_t val);
/* Transfer descriptor memory management */
static inline int rtl8187x_talloc(FAR struct rtl8187x_state_s *priv);
static inline int rtl8187x_tfree(FAR struct rtl8187x_state_s *priv);
/* struct usbhost_registry_s methods */
static struct usbhost_class_s *rtl8187x_create(FAR struct usbhost_driver_s *drvr,
FAR const struct usbhost_id_s *id);
/* struct usbhost_class_s methods */
static int rtl8187x_connect(FAR struct usbhost_class_s *class,
FAR const uint8_t *configdesc, int desclen,
uint8_t funcaddr);
static int rtl8187x_disconnected(FAR struct usbhost_class_s *class);
/* Vendor-Specific USB host support *****************************************/
static uint8_t rtl8187x_ioread8(struct rtl8187x_state_s *priv, uint16_t addr);
static uint16_t rtl8187x_ioread16(struct rtl8187x_state_s *priv, uint16_t addr);
static uint32_t rtl8187x_ioread32(struct rtl8187x_state_s *priv, uint16_t addr);
static int rtl8187x_iowrite8(struct rtl8187x_state_s *priv, uint16_t addr,
uint8_t val);
static int rtl8187x_iowrite16(struct rtl8187x_state_s *priv, uint16_t addr,
uint16_t val);
static int rtl8187x_iowrite32(struct rtl8187x_state_s *priv, uint16_t addr,
uint32_t val);
static uint16_t rtl8187x_read(FAR struct rtl8187x_state_s *priv, uint8_t addr);
static void rtl8187x_write(FAR struct rtl8187x_state_s *priv, uint8_t addr,
uint16_t data);
/* Ethernet driver methods **************************************************/
/* Common TX logic */
static int rtl8187x_transmit(FAR struct rtl8187x_state_s *priv);
static int rtl8187x_uiptxpoll(struct uip_driver_s *dev);
/* RX/EX event handling */
static void rtl8187x_receive(FAR struct rtl8187x_state_s *priv);
static void rtl8187x_txdone(FAR struct rtl8187x_state_s *priv);
/* Watchdog timer expirations */
static void rtl8187x_polltimer(int argc, uint32_t arg, ...);
static void rtl8187x_txtimeout(int argc, uint32_t arg, ...);
/* NuttX callback functions */
static int rtl8187x_ifup(struct uip_driver_s *dev);
static int rtl8187x_ifdown(struct uip_driver_s *dev);
static int rtl8187x_txavail(struct uip_driver_s *dev);
#ifdef CONFIG_NET_IGMP
static int rtl8187x_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
static int rtl8187x_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
#endif
/* EEPROM support */
static void rtl8187x_eeprom_read(FAR struct rtl8187x_state_s *priv,
uint8_t word, uint16_t *data);
static void rtl8187x_eeprom_multiread(FAR struct rtl8187x_state_s *priv,
uint8_t word, FAR uint16_t *data,
uint16_t words);
/* RTL8187 Ethernet initialation and registration */
static int rtl8187x_reset(struct rtl8187x_state_s *priv);
static void rtl8187x_setchannel(FAR struct rtl8187x_state_s *priv, int channel);
static int rtl8187x_start(FAR struct rtl8187x_state_s *priv);
static void rtl8187x_stop(FAR struct rtl8187x_state_s *priv);
static void rtl8225_rfinit(FAR struct rtl8187x_state_s *priv);
static void rtl8225_settxpower(FAR struct rtl8187x_state_s *priv, int channel);
static void rtl8225z2_rfinit(FAR struct rtl8187x_state_s *priv);
static void rtl8225z2_settxpower(FAR struct rtl8187x_state_s *priv, int channel);
static inline int rtl8187x_setup(FAR struct rtl8187x_state_s *priv);
static int rtl8187x_initialize(FAR struct rtl8187x_state_s *priv);
static int rtl8187x_uninitialize(FAR struct rtl8187x_state_s *priv);
/****************************************************************************
* Private Data
****************************************************************************/
/* This structure provides the registry entry ID informatino that will be
* used to associate the USB class driver to a connected USB device.
*/
static const const struct usbhost_id_s g_id =
{
USB_CLASS_VENDOR_SPEC, /* base */
0xff, /* subclass */
0xff, /* proto */
CONFIG_USB_WLAN_VID, /* vid */
CONFIG_USB_WLAN_PID /* pid */
};
/* This is the USB host wireless LAN class's registry entry */
static struct usbhost_registry_s g_wlan =
{
NULL, /* flink */
rtl8187x_create, /* create */
1, /* nids */
&g_id /* id[] */
};
/* This is a bitmap that is used to allocate device names /dev/wlana-z. */
static uint32_t g_devinuse;
/* Default values for IEEE 802.11 channels */
static const struct ieee80211_channel_s g_channels[RTL8187X_NCHANNELS] =
{
{ 1, 2412, 0, 0, 0, 0}, { 2, 2417, 0, 0, 0, 0},
{ 3, 2422, 0, 0, 0, 0}, { 4, 2427, 0, 0, 0, 0},
{ 5, 2432, 0, 0, 0, 0}, { 6, 2437, 0, 0, 0, 0},
{ 7, 2442, 0, 0, 0, 0}, { 8, 2447, 0, 0, 0, 0},
{ 9, 2452, 0, 0, 0, 0}, {10, 2457, 0, 0, 0, 0},
{11, 2462, 0, 0, 0, 0}, {12, 2467, 0, 0, 0, 0},
{13, 2472, 0, 0, 0, 0}, {14, 2484, 0, 0, 0, 0}
};
static const uint32_t g_chanselect[RTL8187X_NCHANNELS] =
{
0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: rtl8187x_takesem
*
* Description:
* This is just a wrapper to handle the annoying behavior of semaphore
* waits that return due to the receipt of a signal.
*
****************************************************************************/
static void rtl8187x_takesem(sem_t *sem)
{
/* Take the semaphore (perhaps waiting) */
while (sem_wait(sem) != 0)
{
/* The only case that an error should occr here is if the wait was
* awakened by a signal.
*/
ASSERT(errno == EINTR);
}
}
/****************************************************************************
* Name: rtl8187x_allocclass
*
* Description:
* This is really part of the logic that implements the create() method
* of struct usbhost_registry_s. This function allocates memory for one
* new class instance.
*
* Input Parameters:
* None
*
* Returned Values:
* On success, this function will return a non-NULL instance of struct
* usbhost_class_s. NULL is returned on failure; this function will
* will fail only if there are insufficient resources to create another
* USB host class instance.
*
****************************************************************************/
static inline FAR struct rtl8187x_state_s *rtl8187x_allocclass(void)
{
FAR struct rtl8187x_state_s *priv;
DEBUGASSERT(!up_interrupt_context());
priv = (FAR struct rtl8187x_state_s *)malloc(sizeof(struct rtl8187x_state_s));
uvdbg("Allocated: %p\n", priv);;
return priv;
}
/****************************************************************************
* Name: rtl8187x_freeclass
*
* Description:
* Free a class instance previously allocated by rtl8187x_allocclass().
*
* Input Parameters:
* class - A reference to the class instance to be freed.
*
* Returned Values:
* None
*
****************************************************************************/
static inline void rtl8187x_freeclass(FAR struct rtl8187x_state_s *class)
{
DEBUGASSERT(class != NULL);
/* Free the class instance (calling sched_free() in case we are executing
* from an interrupt handler.
*/
uvdbg("Freeing: %p\n", class);;
free(class);
}
/****************************************************************************
* Name: Device name management
*
* Description:
* Some tiny functions to coordinate management of device names.
*
****************************************************************************/
static int rtl8187x_allocdevno(FAR struct rtl8187x_state_s *priv)
{
irqstate_t flags;
int devno;
flags = irqsave();
for (devno = 0; devno < 26; devno++)
{
uint32_t bitno = 1 << devno;
if ((g_devinuse & bitno) == 0)
{
g_devinuse |= bitno;
priv->devchar = 'a' + devno;
irqrestore(flags);
return OK;
}
}
irqrestore(flags);
return -EMFILE;
}
static void rtl8187x_freedevno(FAR struct rtl8187x_state_s *priv)
{
int devno = 'a' - priv->devchar;
if (devno >= 0 && devno < 26)
{
irqstate_t flags = irqsave();
g_devinuse &= ~(1 << devno);
irqrestore(flags);
}
}
static inline void rtl8187x_mkdevname(FAR struct rtl8187x_state_s *priv, char *devname)
{
(void)snprintf(devname, DEV_NAMELEN, DEV_FORMAT, priv->devchar);
}
/****************************************************************************
* Name: rtl8187x_destroy
*
* Description:
* The USB device has been disconnected and the refernce count on the USB
* host class instance has gone to 1.. Time to destroy the USB host class
* instance.
*
* Input Parameters:
* arg - A reference to the class instance to be destroyed.
*
* Returned Values:
* None
*
****************************************************************************/
static void rtl8187x_destroy(FAR void *arg)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)arg;
DEBUGASSERT(priv != NULL);
uvdbg("crefs: %d\n", priv->crefs);
/* Unregister the driver */
/* Release the device name used by this connection */
rtl8187x_freedevno(priv);
/* Free the endpoints */
/* Free any transfer buffers */
rtl8187x_tfree(priv);
/* Destroy the semaphores */
/* Disconnect the USB host device */
DRVR_DISCONNECT(priv->drvr);
/* And free the class instance. Hmmm.. this may execute on the worker
* thread and the work structure is part of what is getting freed. That
* should be okay because once the work contained is removed from the
* queue, it should not longer be accessed by the worker thread.
*/
rtl8187x_freeclass(priv);
}
/****************************************************************************
* Name: rtl8187x_cfgdesc
*
* Description:
* This function implements the connect() method of struct
* usbhost_class_s. This method is a callback into the class
* implementation. It is used to provide the device's configuration
* descriptor to the class so that the class may initialize properly
*
* Input Parameters:
* priv - The USB host class instance.
* configdesc - A pointer to a uint8_t buffer container the configuration descripor.
* desclen - The length in bytes of the configuration descriptor.
* funcaddr - The USB address of the function containing the endpoint that EP0
* controls
*
* Returned Values:
* On success, zero (OK) is returned. On a failure, a negated errno value is
* returned indicating the nature of the failure
*
* Assumptions:
* This function will *not* be called from an interrupt handler.
*
****************************************************************************/
static inline int rtl8187x_cfgdesc(FAR struct rtl8187x_state_s *priv,
FAR const uint8_t *configdesc, int desclen,
uint8_t funcaddr)
{
FAR struct usb_cfgdesc_s *cfgdesc;
FAR struct usb_desc_s *desc;
FAR struct usbhost_epdesc_s bindesc;
FAR struct usbhost_epdesc_s boutdesc;
int remaining;
uint8_t found = 0;
int ret;
DEBUGASSERT(priv != NULL &&
configdesc != NULL &&
desclen >= sizeof(struct usb_cfgdesc_s));
/* Verify that we were passed a configuration descriptor */
cfgdesc = (FAR struct usb_cfgdesc_s *)configdesc;
if (cfgdesc->type != USB_DESC_TYPE_CONFIG)
{
return -EINVAL;
}
/* Get the total length of the configuration descriptor (little endian).
* It might be a good check to get the number of interfaces here too.
*/
remaining = (int)rtl8187x_getle16(cfgdesc->totallen);
/* Skip to the next entry descriptor */
configdesc += cfgdesc->len;
remaining -= cfgdesc->len;
/* Loop where there are more dscriptors to examine */
while (remaining >= sizeof(struct usb_desc_s))
{
/* What is the next descriptor? */
desc = (FAR struct usb_desc_s *)configdesc;
switch (desc->type)
{
/* Interface descriptor. We really should get the number of endpoints
* from this descriptor too.
*/
case USB_DESC_TYPE_INTERFACE:
{
FAR struct usb_ifdesc_s *ifdesc = (FAR struct usb_ifdesc_s *)configdesc;
uvdbg("Interface descriptor\n");
DEBUGASSERT(remaining >= USB_SIZEOF_IFDESC);
/* Save the interface number and mark ONLY the interface found */
priv->ifno = ifdesc->ifno;
found = USBHOST_IFFOUND;
}
break;
/* Endpoint descriptor. Here, we expect two bulk endpoints, an IN
* and an OUT.
*/
case USB_DESC_TYPE_ENDPOINT:
{
FAR struct usb_epdesc_s *epdesc = (FAR struct usb_epdesc_s *)configdesc;
uvdbg("Endpoint descriptor\n");
DEBUGASSERT(remaining >= USB_SIZEOF_EPDESC);
/* Check for a bulk endpoint. */
if ((epdesc->attr & USB_EP_ATTR_XFERTYPE_MASK) == USB_EP_ATTR_XFER_BULK)
{
/* Yes.. it is a bulk endpoint. IN or OUT? */
if (USB_ISEPOUT(epdesc->addr))
{
/* It is an OUT bulk endpoint. There should be only one
* bulk OUT endpoint.
*/
if ((found & USBHOST_BOUTFOUND) != 0)
{
/* Oops.. more than one endpoint. We don't know
* what to do with this.
*/
return -EINVAL;
}
found |= USBHOST_BOUTFOUND;
/* Save the bulk OUT endpoint information */
boutdesc.addr = epdesc->addr & USB_EP_ADDR_NUMBER_MASK;
boutdesc.in = false;
boutdesc.funcaddr = funcaddr;
boutdesc.xfrtype = USB_EP_ATTR_XFER_BULK;
boutdesc.interval = epdesc->interval;
boutdesc.mxpacketsize = rtl8187x_getle16(epdesc->mxpacketsize);
uvdbg("Bulk OUT EP addr:%d mxpacketsize:%d\n",
boutdesc.addr, boutdesc.mxpacketsize);
}
else
{
/* It is an IN bulk endpoint. There should be only one
* bulk IN endpoint.
*/
if ((found & USBHOST_BINFOUND) != 0)
{
/* Oops.. more than one endpoint. We don't know
* what to do with this.
*/
return -EINVAL;
}
found |= USBHOST_BINFOUND;
/* Save the bulk IN endpoint information */
bindesc.addr = epdesc->addr & USB_EP_ADDR_NUMBER_MASK;
bindesc.in = 1;
bindesc.funcaddr = funcaddr;
bindesc.xfrtype = USB_EP_ATTR_XFER_BULK;
bindesc.interval = epdesc->interval;
bindesc.mxpacketsize = rtl8187x_getle16(epdesc->mxpacketsize);
uvdbg("Bulk IN EP addr:%d mxpacketsize:%d\n",
bindesc.addr, bindesc.mxpacketsize);
}
}
}
break;
/* Other descriptors are just ignored for now */
default:
break;
}
/* If we found everything we need with this interface, then break out
* of the loop early.
*/
if (found == USBHOST_ALLFOUND)
{
break;
}
/* Increment the address of the next descriptor */
configdesc += desc->len;
remaining -= desc->len;
}
/* Sanity checking... did we find all of things that we need? */
if (found != USBHOST_ALLFOUND)
{
ulldbg("ERROR: Found IF:%s BIN:%s BOUT:%s\n",
(found & USBHOST_IFFOUND) != 0 ? "YES" : "NO",
(found & USBHOST_BINFOUND) != 0 ? "YES" : "NO",
(found & USBHOST_BOUTFOUND) != 0 ? "YES" : "NO");
return -EINVAL;
}
/* We are good... Allocate the endpoints */
ret = DRVR_EPALLOC(priv->drvr, &boutdesc, &priv->epout);
if (ret != OK)
{
udbg("ERROR: Failed to allocate Bulk OUT endpoint\n");
return ret;
}
ret = DRVR_EPALLOC(priv->drvr, &bindesc, &priv->epin);
if (ret != OK)
{
udbg("ERROR: Failed to allocate Bulk IN endpoint\n");
(void)DRVR_EPFREE(priv->drvr, priv->epout);
return ret;
}
ullvdbg("Endpoints allocated\n");
return OK;
}
/****************************************************************************
* Name: rtl8187x_devinit
*
* Description:
* The USB device has been successfully connected. This completes the
* initialization operations. It is first called after the
* configuration descriptor has been received.
*
* This function is called from the connect() method. This function always
* executes on the thread of the caller of connect().
*
* Input Parameters:
* priv - A reference to the class instance.
*
* Returned Values:
* None
*
****************************************************************************/
static inline int rtl8187x_devinit(FAR struct rtl8187x_state_s *priv)
{
int ret = OK;
/* Set aside a transfer buffer for exclusive use by the class driver */
/* Increment the reference count. This will prevent rtl8187x_destroy() from
* being called asynchronously if the device is removed.
*/
priv->crefs++;
DEBUGASSERT(priv->crefs == 2);
/* Configure the device */
/* Register the driver */
if (ret == OK)
{
char devname[DEV_NAMELEN];
uvdbg("Register block driver\n");
rtl8187x_mkdevname(priv, devname);
ret = rtl8187x_initialize(priv);
// ret = register_blockdriver(devname, &g_bops, 0, priv);
}
/* Check if we successfully initialized. We now have to be concerned
* about asynchronous modification of crefs because the block
* driver has been registered.
*/
if (ret == OK)
{
rtl8187x_takesem(&priv->exclsem);
DEBUGASSERT(priv->crefs >= 2);
/* Handle a corner case where (1) open() has been called so the
* reference count is > 2, but the device has been disconnected.
* In this case, the class instance needs to persist until close()
* is called.
*/
if (priv->crefs <= 2 && priv->disconnected)
{
/* We don't have to give the semaphore because it will be
* destroyed when usb_destroy is called.
*/
ret = -ENODEV;
}
else
{
/* Ready for normal operation as a block device driver */
uvdbg("Successfully initialized\n");
priv->crefs--;
rtl8187x_givesem(&priv->exclsem);
}
}
/* Disconnect on any errors detected during volume initialization */
if (ret != OK)
{
udbg("ERROR! Aborting: %d\n", ret);
rtl8187x_destroy(priv);
}
return ret;
}
/****************************************************************************
* Name: rtl8187x_host2le16 and rtl8187x_host2le32
*
* Description:
* Convert a 16/32-bit value in host byte order to little endian byte order.
*
* Input Parameters:
* val - A pointer to the first byte of the little endian value.
*
* Returned Values:
* A uint16_t representing the whole 16-bit integer value
*
****************************************************************************/
static inline uint16_t rtl8187x_host2le16(uint16_t val)
{
#ifdef CONFIG_ENDIAN_BIG
uint16_t ret = ((val & 0x00ff) << 8) |
((val)) >> 8) & 0x00ff))
return ret
#else
return val;
#endif
}
static inline uint32_t rtl8187x_host2le32(uint32_t val)
{
#ifdef CONFIG_ENDIAN_BIG
uint32_t ret = ((val & 0x000000ffL) << 24) |
((val & 0x0000ff00L) << 8) |
((val & 0x00ff0000L) >> 8) |
((val & 0xff000000L) >> 24))
return ret
#else
return val;
#endif
}
/****************************************************************************
* Name: rtl8187x_getle16 and rtl8187x_getle32
*
* Description:
* Get a (possibly unaligned) 16-bit little endian value.
*
* Input Parameters:
* val - A pointer to the first byte of the little endian value.
*
* Returned Values:
* A uint16_t representing the whole 16-bit integer value
*
****************************************************************************/
static inline uint16_t rtl8187x_getle16(const uint8_t *val)
{
/* Little endian means LS byte first in byte stream */
return (uint16_t)val[1] << 8 | (uint16_t)val[0];
}
static inline uint32_t rtl8187x_getle32(const uint8_t *val)
{
/* Little endian means LS halfword first in byte stream */
return (uint32_t)rtl8187x_getle16(&val[2]) << 16 | (uint32_t)rtl8187x_getle16(val);
}
/****************************************************************************
* Name: rtl8187x_putle16 and rtl8187x_putle32
*
* Description:
* Put a (possibly unaligned) 16/32-bit little endian value.
*
* Input Parameters:
* dest - A pointer to the first byte to save the little endian value.
* val - The 16-bit value to be saved.
*
* Returned Values:
* None
*
****************************************************************************/
static void rtl8187x_putle16(uint8_t *dest, uint16_t val)
{
/* Little endian means LS byte first in byte stream */
dest[0] = val & 0xff; /* Little endian means LS byte first in byte stream */
dest[1] = val >> 8;
}
static void rtl8187x_putle32(uint8_t *dest, uint32_t val)
{
/* Little endian means LS halfword first in byte stream */
rtl8187x_putle16(dest, (uint16_t)(val & 0xffff));
rtl8187x_putle16(dest+2, (uint16_t)(val >> 16));
}
/****************************************************************************
* Name: rtl8187x_talloc
*
* Description:
* Allocate transfer buffer memory.
*
* Input Parameters:
* priv - A reference to the class instance.
*
* Returned Values:
* On sucess, zero (OK) is returned. On failure, an negated errno value
* is returned to indicate the nature of the failure.
*
****************************************************************************/
static inline int rtl8187x_talloc(FAR struct rtl8187x_state_s *priv)
{
size_t maxlen;
int ret;
DEBUGASSERT(priv && priv->ctrlreq == NULL && priv->tbuffer == NULL);
/* Allocate TD buffers for use in this driver. We will need two: One for
* the request and one for the data buffer.
*/
ret = DRVR_ALLOC(priv->drvr, (FAR uint8_t **)&priv->ctrlreq, &maxlen);
if (ret != OK)
{
uvdbg("DRVR_ALLOC(ctrlreq) failed: %d\n", ret);
return ret;
}
ret = DRVR_ALLOC(priv->drvr, &priv->tbuffer, &priv->tbuflen);
if (ret != OK)
{
uvdbg("DRVR_ALLOC(tbuffer) failed: %d\n", ret);
}
return ret;
}
/****************************************************************************
* Name: rtl8187x_tfree
*
* Description:
* Free transfer buffer memory.
*
* Input Parameters:
* priv - A reference to the class instance.
*
* Returned Values:
* On sucess, zero (OK) is returned. On failure, an negated errno value
* is returned to indicate the nature of the failure.
*
****************************************************************************/
static inline int rtl8187x_tfree(FAR struct rtl8187x_state_s *priv)
{
DEBUGASSERT(priv);
if (priv->ctrlreq)
{
DEBUGASSERT(priv->drvr && priv->tbuffer);
/* Free the allocated control request */
(void)DRVR_FREE(priv->drvr, (FAR uint8_t *)priv->ctrlreq);
priv->ctrlreq = NULL;
/* Free the allocated buffer */
(void)DRVR_FREE(priv->drvr, priv->tbuffer);
priv->tbuffer = NULL;
priv->tbuflen = 0;
}
return OK;
}
/****************************************************************************
* struct usbhost_registry_s methods
****************************************************************************/
/****************************************************************************
* Name: rtl8187x_create
*
* Description:
* This function implements the create() method of struct usbhost_registry_s.
* The create() method is a callback into the class implementation. It is
* used to (1) create a new instance of the USB host class state and to (2)
* bind a USB host driver "session" to the class instance. Use of this
* create() method will support environments where there may be multiple
* USB ports and multiple USB devices simultaneously connected.
*
* Input Parameters:
* drvr - An instance of struct usbhost_driver_s that the class
* implementation will "bind" to its state structure and will
* subsequently use to communicate with the USB host driver.
* id - In the case where the device supports multiple base classes,
* subclasses, or protocols, this specifies which to configure for.
*
* Returned Values:
* On success, this function will return a non-NULL instance of struct
* usbhost_class_s that can be used by the USB host driver to communicate
* with the USB host class. NULL is returned on failure; this function
* will fail only if the drvr input parameter is NULL or if there are
* insufficient resources to create another USB host class instance.
*
****************************************************************************/
static FAR struct usbhost_class_s *rtl8187x_create(FAR struct usbhost_driver_s *drvr,
FAR const struct usbhost_id_s *id)
{
FAR struct rtl8187x_state_s *priv;
int ret;
/* Allocate a USB host class instance */
priv = rtl8187x_allocclass();
if (priv)
{
/* Initialize the allocated storage class instance */
memset(priv, 0, sizeof(struct rtl8187x_state_s));
/* Allocate buffering */
ret = rtl8187x_talloc(priv);
if (ret != OK)
{
udbg("ERROR: Failed to allocate buffers: %d\n", ret);
goto errout;
}
/* Assign a device number to this class instance */
if (rtl8187x_allocdevno(priv) == OK)
{
/* Initialize class method function pointers */
priv->class.connect = rtl8187x_connect;
priv->class.disconnected = rtl8187x_disconnected;
/* The initial reference count is 1... One reference is held by the driver */
priv->crefs = 1;
/* Initialize semphores (this works okay in the interrupt context) */
sem_init(&priv->exclsem, 0, 1);
/* Bind the driver to the storage class instance */
priv->drvr = drvr;
/* Return the instance of the USB class driver */
return &priv->class;
}
}
/* An error occurred. Free the allocation and return NULL on all failures */
errout:
if (priv)
{
rtl8187x_freeclass(priv);
}
return NULL;
}
/****************************************************************************
* struct usbhost_class_s methods
****************************************************************************/
/****************************************************************************
* Name: rtl8187x_connect
*
* Description:
* This function implements the connect() method of struct
* usbhost_class_s. This method is a callback into the class
* implementation. It is used to provide the device's configuration
* descriptor to the class so that the class may initialize properly
*
* Input Parameters:
* class - The USB host class entry previously obtained from a call to create().
* configdesc - A pointer to a uint8_t buffer container the configuration descripor.
* desclen - The length in bytes of the configuration descriptor.
* funcaddr - The USB address of the function containing the endpoint that EP0
* controls
*
* Returned Values:
* On success, zero (OK) is returned. On a failure, a negated errno value is
* returned indicating the nature of the failure
*
* Assumptions:
* - This function will *not* be called from an interrupt handler.
* - If this function returns an error, the USB host controller driver
* must call to DISCONNECTED method to recover from the error
*
****************************************************************************/
static int rtl8187x_connect(FAR struct usbhost_class_s *class,
FAR const uint8_t *configdesc, int desclen,
uint8_t funcaddr)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)class;
int ret;
DEBUGASSERT(priv != NULL &&
configdesc != NULL &&
desclen >= sizeof(struct usb_cfgdesc_s));
/* Parse the configuration descriptor to get the endpoints */
ret = rtl8187x_cfgdesc(priv, configdesc, desclen, funcaddr);
if (ret != OK)
{
udbg("rtl8187x_cfgdesc() failed: %d\n", ret);
}
else
{
/* Now configure the device and register the NuttX driver */
ret = rtl8187x_devinit(priv);
if (ret != OK)
{
udbg("rtl8187x_devinit() failed: %d\n", ret);
}
}
return ret;
}
/****************************************************************************
* Name: rtl8187x_disconnected
*
* Description:
* This function implements the disconnected() method of struct
* usbhost_class_s. This method is a callback into the class
* implementation. It is used to inform the class that the USB device has
* been disconnected.
*
* Input Parameters:
* class - The USB host class entry previously obtained from a call to
* create().
*
* Returned Values:
* On success, zero (OK) is returned. On a failure, a negated errno value
* is returned indicating the nature of the failure
*
* Assumptions:
* This function may be called from an interrupt handler.
*
****************************************************************************/
static int rtl8187x_disconnected(struct usbhost_class_s *class)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)class;
irqstate_t flags;
DEBUGASSERT(priv != NULL);
/* Set an indication to any users of the device that the device is no
* longer available.
*/
flags = irqsave();
priv->disconnected = true;
/* Now check the number of references on the class instance. If it is one,
* then we can free the class instance now. Otherwise, we will have to
* wait until the holders of the references free them by closing the
* block driver.
*/
ullvdbg("crefs: %d\n", priv->crefs);
if (priv->crefs == 1)
{
/* Destroy the class instance. If we are executing from an interrupt
* handler, then defer the destruction to the worker thread.
* Otherwise, destroy the instance now.
*/
if (up_interrupt_context())
{
/* Destroy the instance on the worker thread. */
uvdbg("Queuing destruction: worker %p->%p\n", priv->work.worker, rtl8187x_destroy);
DEBUGASSERT(priv->work.worker == NULL);
(void)work_queue(&priv->work, rtl8187x_destroy, priv, 0);
}
else
{
/* Do the work now */
rtl8187x_destroy(priv);
}
}
/* Unregister WLAN network interface */
rtl8187x_uninitialize(0);
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: rtl8187x_ioread8/16/32
*
* Description:
* Read 8, 16, or 32 bits from the RTL8187x.
*
* Parameters:
* priv - Reference to the driver state structure
* addr - Device addresses
*
* Returned Value:
* The value read from the the RTL8187x (no error indication returned).
*
* Assumptions:
* Not called from an interrupt handler.
*
****************************************************************************/
static uint8_t rtl8187x_ioread8(struct rtl8187x_state_s *priv, uint16_t addr)
{
FAR struct usb_ctrlreq_s *ctrlreq = priv->ctrlreq;
int ret;
DEBUGASSERT(ctrlreq && priv->tbuffer);
ctrlreq->type = (USB_REQ_DIR_IN | USB_REQ_TYPE_VENDOR | USB_REQ_RECIPIENT_DEVICE);
ctrlreq->req = 0x05;
rtl8187x_putle16(ctrlreq->value, addr);
rtl8187x_putle16(ctrlreq->index, 0);
rtl8187x_putle16(ctrlreq->len, sizeof(uint8_t));
ret = DRVR_CTRLIN(priv->drvr, priv->ctrlreq, priv->tbuffer);
if (ret != OK)
{
udbg("ERROR: DRVR_CTRLIN returned %d\n", ret);
return 0;
}
return *((uint8_t*)priv->tbuffer);
}
static uint16_t rtl8187x_ioread16(struct rtl8187x_state_s*priv, uint16_t addr)
{
FAR struct usb_ctrlreq_s *ctrlreq = priv->ctrlreq;
int ret;
DEBUGASSERT(ctrlreq && priv->tbuffer);
ctrlreq->type = (USB_REQ_DIR_IN | USB_REQ_TYPE_VENDOR | USB_REQ_RECIPIENT_DEVICE);
ctrlreq->req = 0x05;
rtl8187x_putle16(ctrlreq->value, addr);
rtl8187x_putle16(ctrlreq->index, 0);
rtl8187x_putle16(ctrlreq->len, sizeof(uint16_t));
ret = DRVR_CTRLIN(priv->drvr, priv->ctrlreq, priv->tbuffer);
if (ret != OK)
{
udbg("ERROR: DRVR_CTRLIN returned %d\n", ret);
return 0;
}
return rtl8187x_getle16(priv->tbuffer);
}
static uint32_t rtl8187x_ioread32(struct rtl8187x_state_s*priv, uint16_t addr)
{
FAR struct usb_ctrlreq_s *ctrlreq = priv->ctrlreq;
int ret;
DEBUGASSERT(ctrlreq && priv->tbuffer);
ctrlreq->type = (USB_REQ_DIR_IN | USB_REQ_TYPE_VENDOR | USB_REQ_RECIPIENT_DEVICE);
ctrlreq->req = 0x05;
rtl8187x_putle16(ctrlreq->value, addr);
rtl8187x_putle16(ctrlreq->index, 0);
rtl8187x_putle16(ctrlreq->len, sizeof(uint32_t));
ret = DRVR_CTRLIN(priv->drvr, priv->ctrlreq, priv->tbuffer);
if (ret != OK)
{
udbg("ERROR: DRVR_CTRLIN returned %d\n", ret);
return 0;
}
return rtl8187x_getle32(priv->tbuffer);
}
/****************************************************************************
* Function: rtl8187x_iowrite8/16/32
*
* Description:
* Write a 8, 16, or 32 bits to the RTL8187x.
*
* Parameters:
* priv - Reference to the driver state structure
* addr - Device addresses
* val - The value to write
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* Not called from an interrupt handler.
*
****************************************************************************/
static int rtl8187x_iowrite8(struct rtl8187x_state_s *priv, uint16_t addr, uint8_t val)
{
FAR struct usb_ctrlreq_s *ctrlreq = priv->ctrlreq;
DEBUGASSERT(ctrlreq && priv->tbuffer);
ctrlreq->type = (USB_REQ_DIR_OUT | USB_REQ_TYPE_VENDOR | USB_REQ_RECIPIENT_DEVICE);
ctrlreq->req = 0x05;
rtl8187x_putle16(ctrlreq->value, addr);
rtl8187x_putle16(ctrlreq->index, 0);
rtl8187x_putle16(ctrlreq->len, sizeof(uint8_t));
priv->tbuffer[0] = val;
return DRVR_CTRLOUT(priv->drvr, priv->ctrlreq, priv->tbuffer);
}
static int rtl8187x_iowrite16(struct rtl8187x_state_s *priv, uint16_t addr, uint16_t val)
{
FAR struct usb_ctrlreq_s *ctrlreq = priv->ctrlreq;
DEBUGASSERT(ctrlreq && priv->tbuffer);
ctrlreq->type = (USB_REQ_DIR_OUT | USB_REQ_TYPE_VENDOR | USB_REQ_RECIPIENT_DEVICE);
ctrlreq->req = 0x05;
rtl8187x_putle16(ctrlreq->value, addr);
rtl8187x_putle16(ctrlreq->index, 0);
rtl8187x_putle16(ctrlreq->len, sizeof(uint16_t));
rtl8187x_putle16(priv->tbuffer, val);
return DRVR_CTRLOUT(priv->drvr, priv->ctrlreq, priv->tbuffer);
}
static int rtl8187x_iowrite32(struct rtl8187x_state_s *priv, uint16_t addr, uint32_t val)
{
FAR struct usb_ctrlreq_s *ctrlreq = priv->ctrlreq;
DEBUGASSERT(ctrlreq && priv->tbuffer);
ctrlreq->type = (USB_REQ_DIR_OUT | USB_REQ_TYPE_VENDOR | USB_REQ_RECIPIENT_DEVICE);
ctrlreq->req = 0x05;
rtl8187x_putle16(ctrlreq->value, addr);
rtl8187x_putle16(ctrlreq->index, 0);
rtl8187x_putle16(ctrlreq->len, sizeof(uint32_t));
rtl8187x_putle32(priv->tbuffer, val);
return DRVR_CTRLOUT(priv->drvr, priv->ctrlreq, priv->tbuffer);
}
/****************************************************************************
* Function: rtl8187x_transmit
*
* Description:
* Start hardware transmission. Called either from the txdone interrupt
* handling or from watchdog based polling.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static int rtl8187x_transmit(FAR struct rtl8187x_state_s *priv)
{
/* Verify that the hardware is ready to send another packet. If we get
* here, then we are committed to sending a packet; Higher level logic
* must have assured that there is not transmission in progress.
*/
/* Increment statistics */
/* Send the packet: address=priv->ethdev.d_buf, length=priv->ethdev.d_len */
/* Enable Tx interrupts */
/* Setup the TX timeout watchdog (perhaps restarting the timer) */
(void)wd_start(priv->txtimeout, RTL8187X_TXTIMEOUT, rtl8187x_txtimeout, 1, (uint32_t)priv);
return OK;
}
/****************************************************************************
* Function: rtl8187x_uiptxpoll
*
* Description:
* The transmitter is available, check if uIP has any outgoing packets ready
* to send. This is a callback from uip_poll(). uip_poll() may be called:
*
* 1. When the preceding TX packet send is complete,
* 2. When the preceding TX packet send timesout and the interface is reset
* 3. During normal TX polling
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static int rtl8187x_uiptxpoll(struct uip_driver_s *dev)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)dev->d_private;
/* If the polling resulted in data that should be sent out on the network,
* the field d_len is set to a value > 0.
*/
if (priv->ethdev.d_len > 0)
{
uip_arp_out(&priv->ethdev);
rtl8187x_transmit(priv);
/* Check if there is room in the device to hold another packet. If not,
* return a non-zero value to terminate the poll.
*/
}
/* If zero is returned, the polling will continue until all connections have
* been examined.
*/
return 0;
}
/****************************************************************************
* Function: rtl8187x_receive
*
* Description:
* An interrupt was received indicating the availability of a new RX packet
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static void rtl8187x_receive(FAR struct rtl8187x_state_s *priv)
{
do
{
/* Check for errors and update statistics */
/* Check if the packet is a valid size for the uIP buffer configuration */
/* Copy the data data from the hardware to priv->ethdev.d_buf. Set
* amount of data in priv->ethdev.d_len
*/
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv6
if (BUF->type == HTONS(UIP_ETHTYPE_IP6))
#else
if (BUF->type == HTONS(UIP_ETHTYPE_IP))
#endif
{
uip_arp_ipin(&priv->ethdev);
uip_input(&priv->ethdev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->ethdev.d_len > 0)
{
uip_arp_out(&priv->ethdev);
rtl8187x_transmit(priv);
}
}
else if (BUF->type == htons(UIP_ETHTYPE_ARP))
{
uip_arp_arpin(&priv->ethdev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->ethdev.d_len > 0)
{
rtl8187x_transmit(priv);
}
}
}
while (0); /* While there are more packets to be processed */
}
/****************************************************************************
* Function: rtl8187x_txdone
*
* Description:
* An interrupt was received indicating that the last TX packet(s) is done
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void rtl8187x_txdone(FAR struct rtl8187x_state_s *priv)
{
/* Check for errors and update statistics */
/* If no further xmits are pending, then cancel the TX timeout and
* disable further Tx interrupts.
*/
wd_cancel(priv->txtimeout);
/* Then poll uIP for new XMIT data */
(void)uip_poll(&priv->ethdev, rtl8187x_uiptxpoll);
}
/****************************************************************************
* Function: rtl8187x_txtimeout
*
* Description:
* Our TX watchdog timed out. Called from the timer interrupt handler.
* The last TX never completed. Reset the hardware and start again.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void rtl8187x_txtimeout(int argc, uint32_t arg, ...)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)arg;
/* Increment statistics and dump debug info */
/* Then reset the hardware */
/* Then poll uIP for new XMIT data */
(void)uip_poll(&priv->ethdev, rtl8187x_uiptxpoll);
}
/****************************************************************************
* Function: rtl8187x_polltimer
*
* Description:
* Periodic timer handler. Called from the timer interrupt handler.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void rtl8187x_polltimer(int argc, uint32_t arg, ...)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)arg;
/* Check if there is room in the send another TX packet. We cannot perform
* the TX poll if he are unable to accept another packet for transmission.
*/
/* If so, update TCP timing states and poll uIP for new XMIT data. Hmmm..
* might be bug here. Does this mean if there is a transmit in progress,
* we will missing TCP time state updates?
*/
(void)uip_timer(&priv->ethdev, rtl8187x_uiptxpoll, RTL8187X_POLLHSEC);
/* Setup the watchdog poll timer again */
(void)wd_start(priv->txpoll, RTL8187X_WDDELAY, rtl8187x_polltimer, 1, arg);
}
/****************************************************************************
* Function: rtl8187x_ifup
*
* Description:
* NuttX Callback: Bring up the WLAN interface when an IP address is
* provided
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int rtl8187x_ifup(struct uip_driver_s *dev)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)dev->d_private;
int ret;
ndbg("Bringing up: %d.%d.%d.%d\n",
dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
(dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24 );
/* Initialize PHYs and the WLAN interface */
ret = rtl8187x_start(priv);
if (ret == OK)
{
/* Set and activate a timer process */
(void)wd_start(priv->txpoll, RTL8187X_WDDELAY, rtl8187x_polltimer, 1, (uint32_t)priv);
/* Mark the interface as up */
priv->bifup = true;
}
return ret;
}
/****************************************************************************
* Function: rtl8187x_ifdown
*
* Description:
* NuttX Callback: Stop the interface.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int rtl8187x_ifdown(struct uip_driver_s *dev)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)dev->d_private;
irqstate_t flags;
/* Cancel the TX poll timer and TX timeout timers */
flags = irqsave();
wd_cancel(priv->txpoll);
wd_cancel(priv->txtimeout);
/* Put the the EMAC is its non-operational state. This should be a known
* configuration that will guarantee the rtl8187x_ifup() always successfully
* successfully brings the interface back up.
*/
rtl8187x_stop(priv);
/* Mark the device "down" */
priv->bifup = false;
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: rtl8187x_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called in normal user mode
*
****************************************************************************/
static int rtl8187x_txavail(struct uip_driver_s *dev)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)dev->d_private;
irqstate_t flags;
/* Disable interrupts because this function may be called from interrupt
* level processing.
*/
flags = irqsave();
/* Ignore the notification if the interface is not yet up */
if (priv->bifup)
{
/* Check if there is room in the hardware to hold another outgoing packet. */
/* If so, then poll uIP for new XMIT data */
(void)uip_poll(&priv->ethdev, rtl8187x_uiptxpoll);
}
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: rtl8187x_addmac
*
* Description:
* NuttX Callback: Add the specified MAC address to the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int rtl8187x_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Function: rtl8187x_rmmac
*
* Description:
* NuttX Callback: Remove the specified MAC address from the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int rtl8187x_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct rtl8187x_state_s *priv = (FAR struct rtl8187x_state_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Function: rtl8187x_reset
*
* Description:
* Reset and initialize hardware
*
* Parameters:
* priv - Private driver state information
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int rtl8187x_reset(struct rtl8187x_state_s *priv)
{
uint8_t regval;
int i;
/* reset */
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_CONFIG);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CONFIG3);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG3,
regval | RTL8187X_CONFIG3_ANAPARAMWRITE);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_ANAPARAM, RTL8225_ANAPARAM_ON);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_ANAPARAM2, RTL8225_ANAPARAM2_ON);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG3,
regval & ~RTL8187X_CONFIG3_ANAPARAMWRITE);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_NORMAL);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_INTMASK, 0);
usleep(200000);
rtl8187x_iowrite8(priv, 0xfe18, 0x10);
rtl8187x_iowrite8(priv, 0xfe18, 0x11);
rtl8187x_iowrite8(priv, 0xfe18, 0x00);
usleep(200000);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CMD);
regval &= (1 << 1);
regval |= RTL8187X_CMD_RESET;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CMD, regval);
i = 10;
do
{
usleep(2000);
if (!(rtl8187x_ioread8(priv, RTL8187X_ADDR_CMD) & RTL8187X_CMD_RESET))
break;
}
while (--i);
if (!i)
{
udbg("Reset timeout!\n");
return -ETIMEDOUT;
}
/* Reload registers from eeprom */
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_LOAD);
i = 10;
do
{
usleep(4000);
if (!(rtl8187x_ioread8(priv, RTL8187X_ADDR_EEPROMCMD) &
RTL8187X_EEPROMCMD_CONFIG))
break;
}
while (--i);
if (!i)
{
udbg("%s: eeprom reset timeout!\n");
return -ETIMEDOUT;
}
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_CONFIG);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CONFIG3);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG3,
regval | RTL8187X_CONFIG3_ANAPARAMWRITE);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_ANAPARAM, RTL8225_ANAPARAM_ON);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_ANAPARAM2, RTL8225_ANAPARAM2_ON);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG3,
regval & ~RTL8187X_CONFIG3_ANAPARAMWRITE);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_NORMAL);
/* Setup card */
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSSELECT, 0);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_GPIO, 0);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSSELECT, (4 << 8));
rtl8187x_iowrite8(priv, RTL8187X_ADDR_GPIO, 1);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_GPENABLE, 0);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_CONFIG);
rtl8187x_iowrite16(priv, 0xffF4, 0xffFF);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CONFIG1);
regval &= 0x3F;
regval |= 0x80;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG1, regval);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_NORMAL);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_INTTIMEOUT, 0);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_WPACONF, 0);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_RATEFALLBACK, 0x81);
// TODO: set RESP_RATE and BRSR properly
rtl8187x_iowrite8(priv, RTL8187X_ADDR_RESPRATE, (8 << 4) | 0);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_BRSR, 0x01F3);
/* host_usb_init */
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSSELECT, 0);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_GPIO, 0);
regval = rtl8187x_ioread8(priv, 0xfe53);
rtl8187x_iowrite8(priv, 0xfe53, regval | (1 << 7));
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSSELECT, (4 << 8));
rtl8187x_iowrite8(priv, RTL8187X_ADDR_GPIO, 0x20);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_GPENABLE, 0);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSOUTPUT, 0x80);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSSELECT, 0x80);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSENABLE, 0x80);
usleep(100000);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_RFTIMING, 0x000a8008);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_BRSR, 0xffFF);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_RFPARA, 0x00100044);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_CONFIG);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG3, 0x44);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_NORMAL);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_RFPINSENABLE, 0x1FF7);
usleep(100000);
priv->rfinit(priv);
rtl8187x_iowrite16(priv, RTL8187X_ADDR_BRSR, 0x01F3);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_PGSELECT) & ~1;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_PGSELECT, regval | 1);
rtl8187x_iowrite16(priv, 0xffFE, 0x10);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_TALLYSEL, 0x80);
rtl8187x_iowrite8(priv, 0xffFF, 0x60);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_PGSELECT, regval);
return OK;
}
/****************************************************************************
* Function: rtl8187x_setchannel
*
* Description:
* Select the specified channel
*
* Parameters:
* priv - Private driver state information
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static void rtl8187x_setchannel(FAR struct rtl8187x_state_s *priv, int channel)
{
uint32_t regval;
regval = rtl8187x_ioread32(priv, RTL8187X_ADDR_TXCONF);
/* Enable TX loopback on MAC level to avoid TX during channel changes, as
* this has be seen to causes problems and the card will stop work until next
* reset
*/
rtl8187x_iowrite32(priv, RTL8187X_ADDR_TXCONF,
regval | RTL8187X_TXCONF_LOOPBACKMAC);
usleep(10000);
priv->settxpower(priv, channel);
rtl8187x_write(priv, 0x7, g_chanselect[channel - 1]);
usleep(20000);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_TXCONF, regval);
}
/****************************************************************************
* Function: rtl8187_start
*
* Description:
* Bring up the RTL8187
*
* Parameters:
* priv - Private driver state information
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int rtl8187x_start(FAR struct rtl8187x_state_s *priv)
{
uint32_t regval;
int ret;
/* Reset and initialize the hardware */
ret = rtl8187x_reset(priv);
if (ret != OK)
{
return ret;
}
rtl8187x_iowrite16(priv, RTL8187X_ADDR_INTMASK, 0xffff);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_MAR0, ~0);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_MAR1, ~0);
regval = RTL8187X_RXCONF_ONLYERLPKT | RTL8187X_RXCONF_RXAUTORESETPHY | RTL8187X_RXCONF_BSSID |
RTL8187X_RXCONF_MGMT | RTL8187X_RXCONF_DATA | RTL8187X_RXCONF_CTRL |
(7 << 13 /* RX fifo threshold none */ ) |
(7 << 10 /* MAX RX DMA */ ) |
RTL8187X_RXCONF_BROADCAST | RTL8187X_RXCONF_NICMAC | RTL8187X_RXCONF_MONITOR;
priv->rx_conf = regval;
rtl8187x_iowrite32(priv, RTL8187X_ADDR_RXCONF, regval);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CWCONF);
regval &= ~RTL8187X_CWCONF_PERPACKETCWSHIFT;
regval |= RTL8187X_CWCONF_PERPACKETRETRYSHIFT;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CWCONF, regval);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_TXAGCCTL);
regval &= ~RTL8187X_TXAGCCTL_PERPACKETGAINSHIFT;
regval &= ~RTL8187X_TXAGCCTL_PERPACKETANTSELSHIFT;
regval &= ~RTL8187X_TXAGCCTL_FEEDBACKANT;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_TXAGCCTL, regval);
regval = RTL8187X_TXCONF_CWMIN | (7 << 21 /* MAX TX DMA */ ) | RTL8187X_TXCONF_NOICV;
rtl8187x_iowrite32(priv, RTL8187X_ADDR_TXCONF, regval);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CMD);
regval |= RTL8187X_CMD_TXENABLE;
regval |= RTL8187X_CMD_RXENABLE;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CMD, regval);
return OK;
}
/****************************************************************************
* Function: rtl8187x_stop
*
* Description:
* Bring down the RTL8187
*
* Parameters:
* priv - Private driver state information
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static void rtl8187x_stop(FAR struct rtl8187x_state_s *priv)
{
uint32_t regval;
rtl8187x_iowrite16(priv, RTL8187X_ADDR_INTMASK, 0);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CMD);
regval &= ~RTL8187X_CMD_TXENABLE;
regval &= ~RTL8187X_CMD_RXENABLE;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CMD, regval);
rtl8187x_write(priv, 0x4, 0x1f);
usleep(1000);
/* RF stop */
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_CONFIG);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CONFIG3);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG3,
regval | RTL8187X_CONFIG3_ANAPARAMWRITE);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_ANAPARAM2, RTL8225_ANAPARAM2_OFF);
rtl8187x_iowrite32(priv, RTL8187X_ADDR_ANAPARAM, RTL8225_ANAPARAM_OFF);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG3,
regval & ~RTL8187X_CONFIG3_ANAPARAMWRITE);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_NORMAL);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_CONFIG);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_CONFIG4);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_CONFIG4, regval | RTL8187X_CONFIG4_VCOOFF);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_NORMAL);
}
/****************************************************************************
* Function: rtl8187_setup
*
* Description:
* Configure the RTL8187
*
* Parameters:
* priv - Private driver state information
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int rtl8187x_setup(FAR struct rtl8187x_state_s *priv)
{
struct ieee80211_channel_s *channel;
uint16_t permaddr[3];
uint16_t txpwr, regval;
int i;
/* Copy the default channel information */
memcpy(priv->channels, g_channels, RTL8187X_NCHANNELS*sizeof(struct ieee80211_channel_s));
priv->map = (FAR struct rtl8187x_csr_s *)0xff00;
/* Get the EEPROM width */
if (rtl8187x_ioread32(priv, RTL8187X_ADDR_RXCONF) & (1 << 6))
{
priv->width = PCI_EEPROM_WIDTH_93C66;
}
else
{
priv->width = PCI_EEPROM_WIDTH_93C46;
}
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_CONFIG);
usleep(10);
rtl8187x_eeprom_multiread(priv, RTL8187X_EEPROM_MACADDR, permaddr, 3);
udbg("%.4x%.4x%.4x", permaddr[0], permaddr[1], permaddr[2]);
channel = priv->channels;
for (i = 0; i < 3; i++)
{
rtl8187x_eeprom_read(priv, RTL8187X_EEPROM_TXPWRCHAN1 + i, &txpwr);
(*channel++).val = txpwr & 0xff;
(*channel++).val = txpwr >> 8;
}
for (i = 0; i < 2; i++)
{
rtl8187x_eeprom_read(priv, RTL8187X_EEPROM_TXPWRCHAN4 + i, &txpwr);
(*channel++).val = txpwr & 0xff;
(*channel++).val = txpwr >> 8;
}
for (i = 0; i < 2; i++)
{
rtl8187x_eeprom_read(priv, RTL8187X_EEPROM_TXPWRCHAN6 + i, &txpwr);
(*channel++).val = txpwr & 0xff;
(*channel++).val = txpwr >> 8;
}
rtl8187x_eeprom_read(priv, RTL8187X_EEPROM_TXPWRBASE, &priv->txpwr_base);
regval = rtl8187x_ioread8(priv, RTL8187X_ADDR_PGSELECT) & ~1;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_PGSELECT, regval | 1);
/* 0 means asic B-cut, we should use SW 3 wire bit-by-bit banging for radio.
* 1 means we can use USB specific request to write radio registers
*/
priv->asicrev = rtl8187x_ioread8(priv, 0xffFE) & 0x3;
rtl8187x_iowrite8(priv, RTL8187X_ADDR_PGSELECT, regval);
rtl8187x_iowrite8(priv, RTL8187X_ADDR_EEPROMCMD, RTL8187X_EEPROMCMD_NORMAL);
rtl8187x_write(priv, 0, 0x1b7);
if (rtl8187x_read(priv, 8) != 0x588 || rtl8187x_read(priv, 9) != 0x700)
{
priv->rfinit = rtl8225_rfinit;
priv->settxpower = rtl8225_settxpower;
}
else
{
priv->rfinit = rtl8225z2_rfinit;
priv->settxpower = rtl8225z2_settxpower;
}
rtl8187x_write(priv, 0, 0x0b7);
udbg("hwaddr %.4x%.4x%.4x, rtl8187 V%d + %s\n",
permaddr[0], permaddr[1], permaddr[2],
priv->asicrev,
priv->rfinit == rtl8225_rfinit ? "rtl8225" : "rtl8225z2");
return 0;
}
/****************************************************************************
* Function: rtl8187x_initialize
*
* Description:
* Initialize the WLAN controller and driver
*
* Parameters:
* intf - In the case where there are multiple EMACs, this value
* identifies which EMAC is to be initialized.
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int rtl8187x_initialize(FAR struct rtl8187x_state_s *priv)
{
int ret;
/* Initialize the driver structure */
priv->ethdev.d_ifup = rtl8187x_ifup; /* I/F down callback */
priv->ethdev.d_ifdown = rtl8187x_ifdown; /* I/F up (new IP address) callback */
priv->ethdev.d_txavail = rtl8187x_txavail; /* New TX data callback */
#ifdef CONFIG_NET_IGMP
priv->ethdev.d_addmac = rtl8187x_addmac; /* Add multicast MAC address */
priv->ethdev.d_rmmac = rtl8187x_rmmac; /* Remove multicast MAC address */
#endif
priv->ethdev.d_private = (void*)priv; /* Used to recover private state from dev */
/* Create a watchdog for timing polling for and timing of transmisstions */
priv->txpoll = wd_create(); /* Create periodic poll timer */
priv->txtimeout = wd_create(); /* Create TX timeout timer */
/* Initialize the RTL8187x */
ret = rtl8187x_setup(priv);
if (ret == OK)
{
/* Put the interface in the down state. */
rtl8187x_ifdown(&priv->ethdev);
/* Register the device with the OS so that socket IOCTLs can be performed */
(void)netdev_register(&priv->ethdev);
}
return OK;
}
/****************************************************************************
* Function: rtl8187x_initialize
*
* Description:
* Initialize the WLAN controller and driver
*
* Parameters:
* intf - In the case where there are multiple EMACs, this value
* identifies which EMAC is to be initialized.
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int rtl8187x_uninitialize(FAR struct rtl8187x_state_s *priv)
{
/* Unregister the device */
(void)netdev_unregister(&priv->ethdev);
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: usbhost_wlaninit
*
* Description:
* Initialize the USB class driver. This function should be called
* be platform-specific code in order to initialize and register support
* for the USB host class device.
*
* Input Parameters:
* None
*
* Returned Values:
* On success this function will return zero (OK); A negated errno value
* will be returned on failure.
*
****************************************************************************/
int usbhost_wlaninit(void)
{
/* Perform any one-time initialization of the class implementation */
/* Advertise our availability to support (certain) devices */
return usbhost_registerclass(&g_wlan);
}
#endif /* CONFIG_USBHOST && CONFIG_NET && CONFIG_NET_WLAN */
