/**************************************************************************
* arch/arm/src/c5471/c5471_watchdog.c
*
* Copyright (C) 2007, 2009, 2012-2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************
* Included Files
**************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/fs/fs.h>
#include <nuttx/irq.h>
#include <nuttx/timers/watchog.h>
#include <arch/watchdog.h>
#include "chip.h"
#include "up_arch.h"
/**************************************************************************
* Pre-processor Definitions
**************************************************************************/
#undef CONFIG_SOFTWARE_TEST
#undef CONFIG_SOFTWARE_REBOOT
#undef CONFIG_WATCHDOG_STRICT
#define MAX_WDT_USEC 353200
#define MAX_PRESCALER 256
#define C5471_TIMER_STOP 0
#define C5471_TIMER_PRESCALER 0x07 /* Bits 0-2: Prescale value */
#define C5471_TIMER_STARTBIT (1 << 3) /* Bit 3: Start timer bit */
#define C5471_TIMER_AUTORELOAD (1 << 4) /* Bit 4: Auto-reload timer */
#define C5471_TIMER_LOADTIM (0xffff << 5) /* Bits 20-5: Load timer value */
#define C5471_TIMER_MODE (1 << 21) /* Bit 21: Timer mode */
#define C5471_DISABLE_VALUE1 (0xf5 << 22) /* Bits 29-22: WD disable */
#define C5471_DISABLE_VALUE2 (0xa0 << 22)
#define CLOCK_KHZ 47500
#define CLOCK_MHZx2 95
/* Macros to manage access to to watchdog timer macros */
#define c5471_wdt_cntl (*(volatile uint32_t*)C5471_TIMER0_CTRL)
#define c5471_wdt_count (*(volatile uint32_t*)C5471_TIMER0_CNT)
/**************************************************************************
* Private Types
**************************************************************************/
/**************************************************************************
* Private Function Prototypes
**************************************************************************/
/* Local implementation of timer interface */
static inline unsigned int wdt_prescaletoptv(unsigned int prescale);
static int wdt_setusec(uint32_t usec);
static int wdt_interrupt(int irq, void *context);
static int wdt_open(struct file *filep);
static int wdt_close(struct file *filep);
static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen);
static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen);
static int wdt_ioctl(FAR struct file *filep, int cmd, unsigned long arg);
/**************************************************************************
* Private Data
**************************************************************************/
static bool g_wdtopen;
static const struct file_operations g_wdtops =
{
.open = wdt_open,
.close = wdt_close,
.read = wdt_read,
.write = wdt_write,
.ioctl = wdt_ioctl,
};
/**************************************************************************
* Private Functions
**************************************************************************/
/**************************************************************************
* Name: wdt_prescaletoptv
**************************************************************************/
static inline unsigned int wdt_prescaletoptv(unsigned int prescale)
{
unsigned int ptv = 0;
if (prescale > 255)
{
ptv = 7;
}
else
{
unsigned int value = prescale >> 1;
/* 0: 0-2
* 1: 3-4
* 2: 5-8
* 3: 9-16
* 4: 17-32
* 5: 33-64
* 6: 65-128
* 7: 129-
*/
while (value > 1)
{
value >>= 1;
ptv++;
}
}
dbg("prescale=%d -> ptv=%d\n", prescale, ptv);
return ptv;
}
/**************************************************************************
* Name: wdt_setusec
**************************************************************************/
static int wdt_setusec(uint32_t usec)
{
/* prescaler: clock / prescaler = #clock ticks per counter in ptv
* divisor: #counts until the interrupt comes.
*/
uint32_t prescaler = MAX_PRESCALER;
uint32_t divisor = 1;
uint32_t mode;
dbg("usec=%d\n", usec);
/* Calculate a value of prescaler and divisor that will be able
* to count to the usec. It may not be exact or the best
* possible set, but it's a quick and simple algorithm.
*
* divisor max = 0x10000
* prescaler max = MAX_PRESCALER
*/
do
{
divisor = (CLOCK_MHZx2 * usec) / (prescaler * 2);
dbg("divisor=0x%x prescaler=0x%x\n", divisor, prescaler);
if (divisor >= 0x10000)
{
if (prescaler == MAX_PRESCALER)
{
/* This is the max possible ~2.5 seconds. */
dbg("prescaler=0x%x too big!\n", prescaler);
return ERROR;
}
prescaler <<= 1;
if (prescaler > MAX_PRESCALER)
{
prescaler = MAX_PRESCALER;
}
}
}
while (divisor >= 0x10000);
dbg("prescaler=0x%x divisor=0x%x\n", prescaler, divisor);
mode = wdt_prescaletoptv(prescaler);
mode &= ~C5471_TIMER_AUTORELOAD; /* One shot mode. */
mode |= divisor << 5;
dbg("mode=0x%x\n", mode);
c5471_wdt_cntl = mode;
/* Now start the watchdog */
c5471_wdt_cntl |= C5471_TIMER_STARTBIT;
dbg("cntl_timer=0x%x\n", c5471_wdt_cntl);
return 0;
}
/**************************************************************************
* Private Functions
**************************************************************************/
/**************************************************************************
* Name: wdt_interrupt
**************************************************************************/
static int wdt_interrupt(int irq, void *context)
{
dbg("expired\n");
#if defined(CONFIG_SOFTWARE_REBOOT)
# if defined(CONFIG_SOFTWARE_TEST)
dbg(" Test only\n");
# else
dbg(" Re-booting\n");
# warning "Add logic to reset CPU here"
# endif
#else
dbg(" No reboot\n");
#endif
return OK;
}
/**************************************************************************
* Name: wdt_read
**************************************************************************/
static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen)
{
/* We are going to return "NNNNNNNN NNNNNNNN." The followig logic will
* not work if the user provides a buffer smaller than 18 bytes.
*/
dbg("buflen=%d\n", buflen);
if (buflen >= 18)
{
sprintf(buffer, "%08x %08x\n", c5471_wdt_cntl, c5471_wdt_count);
return 18;
}
return 0;
}
/**************************************************************************
* Name: wdt_write
**************************************************************************/
static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen)
{
dbg("buflen=%d\n", buflen);
if (buflen)
{
/* Reset the timer to the maximum delay */
wdt_setusec(MAX_WDT_USEC);
return 1;
}
return 0;
}
/**************************************************************************
* Name: wdt_ioctl
**************************************************************************/
static int wdt_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
dbg("ioctl Call: cmd=0x%x arg=0x%x", cmd, arg);
/* Process the IOCTL command (see arch/watchdog.h) */
switch(cmd)
{
case WDIOC_KEEPALIVE:
wdt_setusec(MAX_WDT_USEC);
break;
default:
return -ENOTTY;
}
return OK;
}
/**************************************************************************
* Name: wdt_open
**************************************************************************/
static int wdt_open(struct file *filep)
{
dbg("");
if (g_wdtopen)
{
return -EBUSY;
}
/* This will automatically load the timer with its max
* count and start it running.
*/
c5471_wdt_cntl = C5471_DISABLE_VALUE1;
c5471_wdt_cntl = C5471_DISABLE_VALUE2;
g_wdtopen = true;
return OK;
}
/**************************************************************************
* Name: wdt_close
**************************************************************************/
static int wdt_close(struct file *filep)
{
dbg("");
/* The task controlling the watchdog has terminated. Take the timer
* the
* watchdog in interrupt mode -- we are going to reset unless the
* reopened again soon.
*/
#ifndef CONFIG_WATCHDOG_STRICT
c5471_wdt_cntl = C5471_TIMER_MODE;
#endif
g_wdtopen = false;
return 0;
}
/**************************************************************************
* Public Functions
**************************************************************************/
/**************************************************************************
* Name: up_wdtinit
**************************************************************************/
int up_wdtinit(void)
{
int ret;
dbg("C547x Watchdog Driver\n");
/* Register as /dev/wdt */
ret = register_driver("/dev/wdt", &g_wdtops, 0666, NULL);
if (ret)
{
return ERROR;
}
/* Register for an interrupt level callback through wdt_interrupt */
dbg("Attach to IRQ=%d\n", C5471_IRQ_WATCHDOG);
/* Make sure that the timer is stopped */
c5471_wdt_cntl = C5471_TIMER_STOP;
/* Request the interrupt. */
ret = irq_attach(C5471_IRQ_WATCHDOG, wdt_interrupt);
if (ret)
{
unregister_driver("/dev/wdt");
return ERROR;
}
return OK;
}