|
|
/************************************************************************************
* arch/arm/src/kinetis/kinetis_config.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_KINETISXX_KINETIS_CONFIG_H
#define __ARCH_ARM_SRC_KINETISXX_KINETIS_CONFIG_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <arch/board/board.h>
#include "chip.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration *********************************************************************/
/* Make that no unsupport UARTs are enabled */
#ifndef KINETIS_NISO7816
# define KINETIS_NISO7816 0
#endif
#if (KINETIS_NISO7816 + KINETIS_NUART) < 6
# undef CONFIG_KINETIS_UART5
# if (KINETIS_NISO7816 + KINETIS_NUART) < 5
# undef CONFIG_KINETIS_UART4
# if (KINETIS_NISO7816 + KINETIS_NUART) < 4
# undef CONFIG_KINETIS_UART3
# if (KINETIS_NISO7816 + KINETIS_NUART) < 3
# undef CONFIG_KINETIS_UART2
# if (KINETIS_NISO7816 + KINETIS_NUART) < 2
# undef CONFIG_KINETIS_UART1
# if (KINETIS_NISO7816 + KINETIS_NUART) < 1
# undef CONFIG_KINETIS_UART0
# endif
# endif
# endif
# endif
# endif
#endif
/* Are any UARTs enabled? */
#undef HAVE_UART_DEVICE
#if defined(CONFIG_KINETIS_UART0) || defined(CONFIG_KINETIS_UART1) || \
defined(CONFIG_KINETIS_UART2) || defined(CONFIG_KINETIS_UART3) || \
defined(CONFIG_KINETIS_UART5)
# define HAVE_UART_DEVICE 1
#endif
/* Is there a serial console? There should be at most one defined. It could be on
* any UARTn, n=0,1,2,3,4,5
*/
#if defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART0)
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART1)
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART2_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART2)
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART3_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART3)
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART4_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART4)
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART5_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART5)
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#else
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART3_SERIAL_CONSOLE
# undef CONFIG_UART4_SERIAL_CONSOLE
# undef CONFIG_UART5_SERIAL_CONSOLE
# undef HAVE_SERIAL_CONSOLE
#endif
/* Check UART flow control (Not yet supported) */
# undef CONFIG_UART0_FLOWCONTROL
# undef CONFIG_UART1_FLOWCONTROL
# undef CONFIG_UART2_FLOWCONTROL
# undef CONFIG_UART3_FLOWCONTROL
# undef CONFIG_UART4_FLOWCONTROL
# undef CONFIG_UART5_FLOWCONTROL
/* UART FIFO support is not fully implemented.
*
* NOTE: UART0 has an 8-byte deep FIFO; the other UARTs have no FIFOs
* (1-deep). There appears to be no way to know when the FIFO is not
* full (other than reading the FIFO length and comparing the FIFO count).
* Hence, the FIFOs are not used in this implementation and, as a result
* TDRE indeed mean that the single output buffer is available.
*
* Performance on UART0 could be improved by enabling the FIFO and by
* redesigning all of the FIFO status logic.
*/
#undef CONFIG_KINETIS_UARTFIFOS
/* Default Priorities */
#ifndef CONFIG_KINETIS_UART0PRIO
# define CONFIG_KINETIS_UART1PRIO NVIC_SYSH_PRIORITY_DEFAULT
#endif
#ifndef CONFIG_KINETIS_UART1PRIO
# define CONFIG_KINETIS_UART2PRIO NVIC_SYSH_PRIORITY_DEFAULT
#endif
#ifndef CONFIG_KINETIS_UART2PRIO
# define CONFIG_KINETIS_UART3PRIO NVIC_SYSH_PRIORITY_DEFAULT
#endif
#ifndef CONFIG_KINETIS_UART3PRIO
# define CONFIG_KINETIS_UART4PRIO NVIC_SYSH_PRIORITY_DEFAULT
#endif
#ifndef CONFIG_KINETIS_UART4PRIO
# define CONFIG_KINETIS_UART5PRIO NVIC_SYSH_PRIORITY_DEFAULT
#endif
#ifndef CONFIG_KINETIS_UART5PRIO
# define CONFIG_KINETIS_UART6PRIO NVIC_SYSH_PRIORITY_DEFAULT
#endif
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Inline Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_KINETISXX_KINETIS_CONFIG_H */
|
