/************************************************************************************
* arch/arm/src/kl/kl_gpio.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_KL_KL_SPI_H
#define __ARCH_ARM_SRC_KL_KL_SPI_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_KL_SPI0) || defined(CONFIG_KL_SPI1)
/************************************************************************************
* Pre-processor Declarations
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: up_spiinitialize
*
* Description:
* Initialize the selected SPI port.
*
* Input Parameter:
* Port number (for hardware that has mutiple SPI interfaces)
*
* Returned Value:
* Valid SPI device structure reference on succcess; a NULL on failure
*
************************************************************************************/
struct spi_dev_s;
FAR struct spi_dev_s *up_spiinitialize(int port);
/************************************************************************************
* Name: kl_spi[n]select, kl_spi[n]status, and kl_spi[n]cmddata
*
* Description:
* These external functions must be provided by board-specific logic. They are
* implementations of the select, status, and cmddata methods of the SPI interface
* defined by struct spi_ops_s (see include/nuttx/spi/spi.h). All other methods
* including up_spiinitialize()) are provided by common Kinetis logic. To use
* this common SPI logic on your board:
*
* 1. Provide logic in kl_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide kl_spi[n]select() and kl_spi[n]status() functions
* in your board-specific logic. These functions will perform chip selection
* and status operations using GPIOs in the way your board is configured.
* 2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
* kl_spi[n]cmddata() functions in your board-specific logic. These
* functions will perform cmd/data selection operations using GPIOs in the way
* your board is configured.
* 3. Add a call to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
************************************************************************************/
enum spi_dev_e;
#ifdef CONFIG_KL_SPI0
void kl_spi0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
uint8_t kl_spi0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
int kl_spi0cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
#ifdef CONFIG_KL_SPI1
void kl_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
uint8_t kl_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
int kl_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_KL_SPI0 || CONFIG_KL_SPI1 */
#endif /* __ARCH_ARM_SRC_KL_KL_SPI_H */