/************************************************************************************
* arch/arm/src/lm3s/lm3s_syscontrol.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LM3S_LM3S_SYSCONTROL_H
#define __ARCH_ARM_SRC_LM3S_LM3S_SYSCONTROL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* System Control Register Offsets **************************************************/
#ifdef CONFIG_ARCH_CHIP_LM3S6918
#define LM3S_SYSCON_DID0_OFFSET 0x000 /* Device Identification 0 */
#define LM3S_SYSCON_DID1_OFFSET 0x004 /* Device Identification 1 */
#define LM3S_SYSCON_DC0_OFFSET 0x008 /* Device Capabilities 0 */
#define LM3S_SYSCON_DC1_OFFSET 0x010 /* Device Capabilities 1 */
#define LM3S_SYSCON_DC2_OFFSET 0x014 /* Device Capabilities 2 */
#define LM3S_SYSCON_DC3_OFFSET 0x018 /* Device Capabilities 3 */
#define LM3S_SYSCON_DC4_OFFSET 0x01c /* Device Capabilities 4 */
#define LM3S_SYSCON_PBORCTL_OFFSET 0x030 /* Brown-Out Reset Control */
#define LM3S_SYSCON_LDOPCTL_OFFSET 0x034 /* LDO Power Control */
#define LM3S_SYSCON_SRCR0_OFFSET 0x040 /* Software Reset Control 0 */
#define LM3S_SYSCON_SRCR1_OFFSET 0x044 /* Software Reset Control 1 */
#define LM3S_SYSCON_SRCR2_OFFSET 0x048 /* Software Reset Control 2*/
#define LM3S_SYSCON_RIS_OFFSET 0x050 /* Raw Interrupt Status */
#define LM3S_SYSCON_IMC_OFFSET 0x054 /* Interrupt Mask Control */
#define LM3S_SYSCON_MISC_OFFSET 0x058 /* Masked Interrupt Status and Clear */
#define LM3S_SYSCON_RESC_OFFSET 0x05c /* Reset Cause */
#define LM3S_SYSCON_RCC_OFFSET 0x060 /* Run-Mode Clock Configuration */
#define LM3S_SYSCON_PLLCFG_OFFSET 0x064 /* XTAL to PLL Translation */
#define LM3S_SYSCON_RCC2_OFFSET 0x070 /* Run-Mode Clock Configuration 2 */
#define LM3S_SYSCON_RCGC0_OFFSET 0x100 /* Run Mode Clock Gating Control Register 0 */
#define LM3S_SYSCON_RCGC1_OFFSET 0x104 /* Run Mode Clock Gating Control Register 1 */
#define LM3S_SYSCON_RCGC2_OFFSET 0x108 /* Run Mode Clock Gating Control Register 2 */
#define LM3S_SYSCON_SCGC0_OFFSET 0x110 /* Sleep Mode Clock Gating Control Register 0 */
#define LM3S_SYSCON_SCGC1_OFFSET 0x114 /* Sleep Mode Clock Gating Control Register 1 */
#define LM3S_SYSCON_SCGC2_OFFSET 0x118 /* Sleep Mode Clock Gating Control Register 2 */
#define LM3S_SYSCON_DCGC0_OFFSET 0x120 /* Deep Sleep Mode Clock Gating Control Register 0 */
#define LM3S_SYSCON_DCGC1_OFFSET 0x124 /* Deep Sleep Mode Clock Gating Control Register 1 */
#define LM3S_SYSCON_DCGC2_OFFSET 0x128 /* Deep Sleep Mode Clock Gating Control Register 2 */
#define LM3S_SYSCON_DSLPCLKCFG_OFFSET 0x144 /* Deep Sleep Clock Configuration*/
#else
# error "Peripheral base addresses not specified for this LM3S chip"
#endif
/* System Control Register Addresses ************************************************/
#define LM3S_SYSCON_DID0 (LM3S_SYSCON_BASE + LM3S_SYSCON_DID0_OFFSET)
#define LM3S_SYSCON_DID1 (LM3S_SYSCON_BASE + LM3S_SYSCON_DID1_OFFSET)
#define LM3S_SYSCON_DC0 (LM3S_SYSCON_BASE + LM3S_SYSCON_DC0_OFFSET)
#define LM3S_SYSCON_DC1 (LM3S_SYSCON_BASE + LM3S_SYSCON_DC1_OFFSET)
#define LM3S_SYSCON_DC2 (LM3S_SYSCON_BASE + LM3S_SYSCON_DC2_OFFSET)
#define LM3S_SYSCON_DC3 (LM3S_SYSCON_BASE + LM3S_SYSCON_DC3_OFFSET)
#define LM3S_SYSCON_DC4 (LM3S_SYSCON_BASE + LM3S_SYSCON_DC4_OFFSET)
#define LM3S_SYSCON_PBORCTL (LM3S_SYSCON_BASE + LM3S_SYSCON_PBORCTL_OFFSET)
#define LM3S_SYSCON_LDOPCTL (LM3S_SYSCON_BASE + LM3S_SYSCON_LDOPCTL_OFFSET)
#define LM3S_SYSCON_SRCR0 (LM3S_SYSCON_BASE + LM3S_SYSCON_SRCR0_OFFSET)
#define LM3S_SYSCON_SRCR1 (LM3S_SYSCON_BASE + LM3S_SYSCON_SRCR1_OFFSET)
#define LM3S_SYSCON_SRCR2 (LM3S_SYSCON_BASE + LM3S_SYSCON_SRCR2_OFFSET)
#define LM3S_SYSCON_RIS (LM3S_SYSCON_BASE + LM3S_SYSCON_RIS_OFFSET)
#define LM3S_SYSCON_IMC (LM3S_SYSCON_BASE + LM3S_SYSCON_IMC_OFFSET)
#define LM3S_SYSCON_MISC (LM3S_SYSCON_BASE + LM3S_SYSCON_MISC_OFFSET)
#define LM3S_SYSCON_RESC (LM3S_SYSCON_BASE + LM3S_SYSCON_RESC_OFFSET)
#define LM3S_SYSCON_RCC (LM3S_SYSCON_BASE + LM3S_SYSCON_RCC_OFFSET)
#define LM3S_SYSCON_PLLCFG (LM3S_SYSCON_BASE + LM3S_SYSCON_PLLCFG_OFFSET)
#define LM3S_SYSCON_RCC2 (LM3S_SYSCON_BASE + LM3S_SYSCON_RCC2_OFFSET)
#define LM3S_SYSCON_RCGC0 (LM3S_SYSCON_BASE + LM3S_SYSCON_RCGC0_OFFSET)
#define LM3S_SYSCON_RCGC1 (LM3S_SYSCON_BASE + LM3S_SYSCON_RCGC1_OFFSET)
#define LM3S_SYSCON_RCGC2 (LM3S_SYSCON_BASE + LM3S_SYSCON_RCGC2_OFFSET)
#define LM3S_SYSCON_SCGC0 (LM3S_SYSCON_BASE + LM3S_SYSCON_SCGC0_OFFSET)
#define LM3S_SYSCON_SCGC1 (LM3S_SYSCON_BASE + LM3S_SYSCON_SCGC1_OFFSET)
#define LM3S_SYSCON_SCGC2 (LM3S_SYSCON_BASE + LM3S_SYSCON_SCGC2_OFFSET)
#define LM3S_SYSCON_DCGC0 (LM3S_SYSCON_BASE + LM3S_SYSCON_DCGC0_OFFSET)
#define LM3S_SYSCON_DCGC1 (LM3S_SYSCON_BASE + LM3S_SYSCON_DCGC1_OFFSET)
#define LM3S_SYSCON_DCGC2 (LM3S_SYSCON_BASE + LM3S_SYSCON_DCGC2_OFFSET)
#define LM3S_SYSCON_DSLPCLKCFG (LM3S_SYSCON_BASE + LM3S_SYSCON_DSLPCLKCFG_OFFSET)
/* System Control Register Bit Definitions ******************************************/
/* Device Identification 0 (DID0), offset 0x000 */
#define SYSCON_DID0_MINOR_SHIFT 0 /* Bits 7-0: Minor Revision of the device */
#define SYSCON_DID0_MINRO_MASK (0xff << SYSCON_DID0_MINOR_SHIFT)
#define SYSCON_DID0_MAJOR_SHIFT 8 /* Bits 15-8: Major Revision of the device */
#define SYSCON_DID0_MAJOR_MASK (0xff << SYSCON_DID0_MAJOR_SHIFT)
#define SYSCON_DID0_CLASS_SHIFT 16 /* Bits 23-16: Device Class */
#define SYSCON_DID0_CLASS_MASK (0xff << SYSCON_DID0_CLASS_SHIFT)
#define SYSCON_DID0_VER_SHIFT 28 /* Bits 30-28: DID0 Version */
#define SYSCON_DID0_VER_MASK (7 << SYSCON_DID0_VER_SHIFT)
/* Device Identification 1 (DID1), offset 0x004 */
#define SYSCON_DID1_QUAL_SHIFT 0 /* Bits 1-0: Qualification Status */
#define SYSCON_DID1_QUAL_MASK (0x03 << SYSCON_DID1_QUAL_SHIFT)
#define SYSCON_DID1_ROHS (1 << 2) /* Bit 2: RoHS-Compliance */
#define SYSCON_DID1_PKG_SHIFT 3 /* Bits 4-3: Package Type */
#define SYSCON_DID1_PKG_MASK (0x03 << SYSCON_DID1_PKG_SHIFT)
#define SYSCON_DID1_TEMP_SHIFT 5 /* Bits 7-5: Temperature Range */
#define SYSCON_DID1_TEMP_MASK (0x07 << SYSCON_DID1_TEMP_SHIFT)
#define SYSCON_DID1_PINCOUNT_SHIFT 13 /* Bits 15-13: Package Pin Count */
#define SYSCON_DID1_PINCOUNT_MASK (0x07 << SYSCON_DID1_PINCOUNT_SHIFT)
#define SYSCON_DID1_PARTNO_SHIFT 16 /* Bits 23-16: Part Number */
#define SYSCON_DID1_PARTNO_MASK (0xff << SYSCON_DID1_PARTNO_SHIFT)
#define SYSCON_DID1_FAM_SHIFT 24 /* Bits 27-24: Family */
#define SYSCON_DID1_FAM_MASK (0x0f << SYSCON_DID1_FAM_SHIFT)
#define SYSCON_DID1_VER_SHIFT 28 /* Bits 31-28: DID1 Version */
#define SYSCON_DID1_VER_MASK (0x0f << SYSCON_DID1_VER_SHIFT)
/* Device Capabilities 0 (DC0), offset 0x008 */
#define SYSCON_DC0_FLASHSZ_SHIFT 0 /* Bits 15-0: FLASH Size */
#define SYSCON_DC0_FLASHSZ_MASK (0xffff << SYSCON_DC0_FLASHSZ_SHIFT)
#define SYSCON_DC0_SRAMSZ_SHIFT 16 /* Bits 31-16: SRAM Size */
#define SYSCON_DC0_SRAMSZ_MASK (0xffff << SYSCON_DC0_SRAMSZ_SHIFT)
/* Device Capabilities 1 (DC1), offset 0x010 */
#define SYSCON_DC1_JTAG (1 << 0) /* Bit 0: JTAG Present */
#define SYSCON_DC1_SWD (1 << 1) /* Bit 1: SWD Present */
#define SYSCON_DC1_SWO (1 << 2) /* Bit 2: SWO Trace Port Present */
#define SYSCON_DC1_WDT (1 << 3) /* Bit 3: Watchdog Timer Present */
#define SYSCON_DC1_PLL (1 << 4) /* Bit 4: PLL Present */
#define SYSCON_DC1_TEMPSNS (1 << 5) /* Bit 5: Temp Sensor Present */
#define SYSCON_DC1_HIB (1 << 6) /* Bit 6: Hibernation Module Present */
#define SYSCON_DC1_MPU (1 << 7) /* Bit 7: MPU Present */
#define SYSCON_DC1_MAXADCSPD_SHIFT 8 /* Bits 9-8: Max ADC Speed */
#define SYSCON_DC1_MAXADCSPD_MASK (0x03 << SYSCON_DC1_MAXADCSPD_SHIFT)
#define SYSCON_DC1_ADC (1 << 16) /* Bit 16: ADC Module Present */
#define SYSCON_DC1_MINSYSDIV_SHIFT 12 /* Bits 15-12: System Clock Divider Minimum */
#define SYSCON_DC1_MINSYSDIV_MASK (0x0f << SYSCON_DC1_MINSYSDIV_SHIFT)
/* Device Capabilities 2 (DC2), offset 0x014 */
#define SYSCON_DC2_UART0 (1 << 0) /* Bit 0: UART0 Present */
#define SYSCON_DC2_UART1 (1 << 1) /* Bit 1: UART1 Present */
#define SYSCON_DC2_SSI0 (1 << 4) /* Bit 4: SSI0 Present */
#define SYSCON_DC2_SSI1 (1 << 5) /* Bit 5: SSI1 Present */
#define SYSCON_DC2_I2C0 (1 << 12) /* Bit 12: I2C Module 0 Present */
#define SYSCON_DC2_I2C1 (1 << 14) /* Bit 14: I2C Module 1 Present */
#define SYSCON_DC2_TIMER0 (1 << 16) /* Bit 16: Timer 0 Present */
#define SYSCON_DC2_TIMER1 (1 << 17) /* Bit 17: Timer 1 Present */
#define SYSCON_DC2_TIMER2 (1 << 18) /* Bit 18: Timer 2 Present */
#define SYSCON_DC2_TIMER3 (1 << 19) /* Bit 19: Timer 3 Present */
#define SYSCON_DC2_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Present */
#define SYSCON_DC2_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Present */
/* Device Capabilities 3 (DC3), offset 0x018 */
#define SYSCON_DC3_C0MINUS (1 << 6) /* Bit 6: C0- Pin Present */
#define SYSCON_DC3_C0PLUS (1 << 7) /* Bit 7: C0+ Pin Present */
#define SYSCON_DC3_C0O (1 << 8) /* Bit 8: C0o Pin Present */
#define SYSCON_DC3_C1MINUS (1 << 9) /* Bit 9: C1- Pin Present */
#define SYSCON_DC3_C1PLUS (1 << 10) /* Bit 10: C1+ Pin Present */
#define SYSCON_DC3_ADC0 (1 << 16) /* Bit 16: ADC0 Pin Present */
#define SYSCON_DC3_ADC1 (1 << 17) /* Bit 17: ADC1 Pin Present */
#define SYSCON_DC3_ADC2 (1 << 18) /* Bit 18: ADC2 Pin Present */
#define SYSCON_DC3_ADC3 (1 << 19) /* Bit 19: ADC3 Pin Present */
#define SYSCON_DC3_ADC4 (1 << 20) /* Bit 20: ADC4 Pin Present */
#define SYSCON_DC3_ADC5 (1 << 21) /* Bit 21: ADC5 Pin Present */
#define SYSCON_DC3_ADC6 (1 << 22) /* Bit 22: ADC6 Pin Present */
#define SYSCON_DC3_ADC7 (1 << 23) /* Bit 23: ADC7 Pin Present */
#define SYSCON_DC3_CCP0 (1 << 24) /* Bit 24: CCP0 Pin Present */
#define SYSCON_DC3_CCP1 (1 << 25) /* Bit 25: CCP1 Pin Present */
#define SYSCON_DC3_CCP2 (1 << 26) /* Bit 26: CCP2 Pin Present */
#define SYSCON_DC3_CCP3 (1 << 27) /* Bit 27: CCP3 Pin Present */
#define SYSCON_DC3_CCP4 (1 << 28) /* Bit 28: CCP4 Pin Present */
#define SYSCON_DC3_CCP5 (1 << 29) /* Bit 29: CCP5 Pin Present */
#define SYSCON_DC3_32KHZ (1 << 31) /* Bit 31: 32KHz Input Clock Available */
/* Device Capabilities 4 (DC4), offset 0x01c */
#define SYSCON_DC4_GPIOA (1 << 0) /* Bit 0: GPIO Port A Present */
#define SYSCON_DC4_GPIOB (1 << 1) /* Bit 1: GPIO Port B Present */
#define SYSCON_DC4_GPIOC (1 << 2) /* Bit 2: GPIO Port C Present */
#define SYSCON_DC4_GPIOD (1 << 3) /* Bit 3: GPIO Port D Present */
#define SYSCON_DC4_GPIOE (1 << 4) /* Bit 4: GPIO Port E Present */
#define SYSCON_DC4_GPIOF (1 << 5) /* Bit 5: GPIO Port F Present */
#define SYSCON_DC4_GPIOG (1 << 6) /* Bit 6: GPIO Port G Present */
#define SYSCON_DC4_GPIOH (1 << 7) /* Bit 7: GPIO Port H Present */
#define SYSCON_DC4_EMAC0 (1 << 28) /* Bit 28: Ethernet MAC0 Present */
#define SYSCON_DC4_EPHY0 (1 << 30) /* Bit 30: Ethernet PHY0 Present */
/* Brown-Out Reset Control (PBORCTL), offset 0x030 */
#define SYSCON_PBORCTL_BORIOR (1 << 1) /* Bit 1: BOR Interrupt or Reset */
/* LDO Power Control (LDOPCTL), offset 0x034 */
#define SYSCON_LDOPCTL_VADJ_SHIFT 0 /* Bits 5-0: LDO Output Voltage */
#define SYSCON_LDOPCTL_VADJ_MASK (0x3f << SYSCON_LDOPCTL_VADJ_SHIFT)
/* Software Reset Control 0 (SRCR0), offset 0x040 */
#define SYSCON_SRCR0_WDT (1 << 3) /* Bit 3: WDT Reset Control */
#define SYSCON_SRCR0_HIB (1 << 6) /* Bit 6: HIB Reset Control */
#define SYSCON_SRCR0_ADC (1 << 16) /* Bit 16: ADC0 Reset Control */
/* Software Reset Control 1 (SRCR1), offset 0x044 */
#define SYSCON_SRCR1_UART0 (1 << 0) /* Bit 0: UART0 Reset Control */
#define SYSCON_SRCR1_UART1 (1 << 1) /* Bit 1: UART1 Reset Control */
#define SYSCON_SRCR1_SSI0 (1 << 4) /* Bit 4: SSI0 Reset Control1 */
#define SYSCON_SRCR1_SSI1 (1 << 5) /* Bit 5: SSI1 Reset Control */
#define SYSCON_SRCR1_I2C0 (1 << 12) /* Bit 12: I2C0 Reset Control */
#define SYSCON_SRCR1_I2C1 (1 << 14) /* Bit 14: I2C1 Reset Control */
#define SYSCON_SRCR1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Reset Control */
#define SYSCON_SRCR1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Reset Control */
#define SYSCON_SRCR1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Reset Control */
#define SYSCON_SRCR1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Reset Control */
#define SYSCON_SRCR1_COMP0 (1 << 24) /* Bit 24: Analog Comp 0 Reset Control */
#define SYSCON_SRCR1_COMP1 (1 << 25) /* Bit 25: Analog Comp 1 Reset Control */
/* Software Reset Control 2 (SRCR2), offset 0x048 */
#define SYSCON_SRCR2_GPIOA (1 << 0) /* Bit 0: Port A Reset Control */
#define SYSCON_SRCR2_GPIOB (1 << 1) /* Bit 1: Port B Reset Control */
#define SYSCON_SRCR2_GPIOC (1 << 2) /* Bit 2: Port C Reset Control */
#define SYSCON_SRCR2_GPIOD (1 << 3) /* Bit 3: Port D Reset Control */
#define SYSCON_SRCR2_GPIOE (1 << 4) /* Bit 4: Port E Reset Control */
#define SYSCON_SRCR2_GPIOF (1 << 5) /* Bit 5: Port F Reset Control */
#define SYSCON_SRCR2_GPIOG (1 << 6) /* Bit 6: Port G Reset Control */
#define SYSCON_SRCR2_GPIOH (1 << 7) /* Bit 7: Port H Reset Control */
#define SYSCON_SRCR2_EMAC0 (1 << 28) /* Bit 28: MAC0 Reset Control */
#define SYSCON_SRCR2_EPHY0 (1 << 30) /* Bit 30: PHY0 Reset Control */
/* Raw Interrupt Status (RIS), offset 0x050 */
#define SYSCON_RIS_BORRIS (1 << 1) /* Bit 1: Brown-Out Reset Raw Interrupt Status */
#define SYSCON_RIS_PLLLRIS (1 << 6) /* Bit 6: PLL Lock Raw Interrupt Status */
/* Interrupt Mask Control (IMC), offset 0x054 */
#define SYSCON_IMC_BORIM (1 << 1) /* Bit 1: Brown-Out Reset Interrupt Mask */
#define SYSCON_IMC_PLLLIM (1 << 6) /* Bit 6: PLL Lock Interrupt Mask */
/* Masked Interrupt Status and Clear (MISC), offset 0x058 */
#define SYSCON_MISC_BORMIS (1 << 1) /* Bit 1: BOR Masked Interrupt Status */
#define SYSCON_MISC_PLLLMIS (1 << 6) /* Bit 6: PLL Lock Masked Interrupt Status */
/* Reset Cause (RESC), offset 0x05C */
#define SYSCON_RESC_EXT (1 << 0) /* Bit 0: External Reset */
#define SYSCON_RESC_POR (1 << 1) /* Bit 1: Power-On Reset */
#define SYSCON_RESC_BOR (1 << 2) /* Bit 2: Brown-Out Reset */
#define SYSCON_RESC_WDT (1 << 3) /* Bit 3: Watchdog Timer Reset */
#define SYSCON_RESC_SW (1 << 4) /* Bit 4: Software Reset */
/* Run-Mode Clock Configuration (RCC), offset 0x060 */
#define SYSCON_RCC_MOSCDIS (1 << 0) /* Bit 0: Main Oscillator Disable */
#define SYSCON_RCC_IOSCDIS (1 << 1) /* Bit 1: Internal Oscillator Disable */
#define SYSCON_RCC_OSCSRC_SHIFT 4 /* Bits 5-4: Oscillator Source */
#define SYSCON_RCC_OSCSRC_MASK (0x03 << SYSCON_RCC_OSCSRC_SHIFT)
#define SYSCON_RCC_XTAL_SHIFT 6 /* Bits 9-6: Crystal Value */
#define SYSCON_RCC_XTAL_MASK (0x0f << SYSCON_RCC_XTAL_SHIFT)
#define SYSCON_RCC_BYPASS (1 << 11) /* Bit 11: PLL Bypass */
#define SYSCON_RCC_PWRDN (1 << 13) /* Bit 13: PLL Power Down */
#define SYSCON_RCC_USESYSDIV (1 << 22) /* Bit 22: Enable System Clock Divider */
#define SYSCON_RCC_SYSDIV_SHIFT 26 /* Bits 26-23: System Clock Divisor */
#define SYSCON_RCC_SYSDIV_MASK (0x0f << SYSCON_RCC_SYSDIV_SHIFT)
#define SYSCON_RCC_ACG (1 << 27) /* Bit 27: Auto Clock Gating */
/* XTAL to PLL Translation (PLLCFG), offset 0x064 */
#define SYSCON_PLLCFG_F_SHIFT 5 /* Bits 13-5: PLL F Value */
#define SYSCON_PLLCFG_F_MASK (0x1ff << SYSCON_PLLCFG_F_SHIFT)
#define SYSCON_PLLCFG_R_SHIFT 0 /* Bits 4-0: PLL R Value */
#define SYSCON_PLLCFG_R_MASK (0x1f << SYSCON_PLLCFG_R_SHIFT)
/* Run-Mode Clock Configuration 2 (RCC2), offset 0x070 */
#define SYSCON_RCC2_OSCSRC2_SHIFT 4 /* Bits 6-4: Oscillator Source */
#define SYSCON_RCC2_OSCSRC2_MASK (0x07 << SYSCON_RCC2_OSCSRC2_SHIFT)
#define SYSCON_RCC2_BYPASS2 (1 << 11) /* Bit 11: Bypass PLL */
#define SYSCON_RCC2_PWRDN2 (1 << 13) /* Bit 13: Power-Down PLL */
#define SYSCON_RCC2_SYSDIV2_SHIFT 23 /* Bits 28-23: System Clock Divisor */
#define SYSCON_RCC2_SYSDIV2_MASK (0x3f << SYSCON_RCC2_SYSDIV2_SHIFT)
#define SYSCON_RCC2_USERCC2 (1 << 31) /* Bit 31: Use RCC2 When set */
/* Run Mode Clock Gating Control Register 0 (RCGC0), offset 0x100 */
#define SYSCON_RCGC0_WDT (1 << 3) /* Bit 3: WDT Clock Gating Control */
#define SYSCON_RCGC0_HIB (1 << 6) /* Bit 6: HIB Clock Gating Control */
#define SYSCON_RCGC0_MAXADCSPD_SHIFT 8 /* Bits 9-8: ADC Sample Speed */
#define SYSCON_RCGC0_MAXADCSPD_MASK (0x03 << SYSCON_RCGC0_MAXADCSPD_SHIFT)
#define SYSCON_RCGC0_ADC (1 << 16) /* Bit 16: ADC0 Clock Gating Control */
/* Run Mode Clock Gating Control Register 1 (RCGC1), offset 0x104 */
#define SYSCON_RCGC1_UART0 (1 << 0) /* Bit 0: UART0 Clock Gating Control */
#define SYSCON_RCGC1_UART1 (1 << 1) /* Bit 1: UART1 Clock Gating Control */
#define SYSCON_RCGC1_SSI0 (1 << 4) /* Bit 4: SSI0 Clock Gating Control */
#define SYSCON_RCGC1_SSI1 (1 << 5) /* Bit 5: SSI1 Clock Gating Control */
#define SYSCON_RCGC1_I2C0 (1 << 12) /* Bit 12: I2C0 Clock Gating Control */
#define SYSCON_RCGC1_I2C1 (1 << 14) /* Bit 14: I2C1 Clock Gating Control */
#define SYSCON_RCGC1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Clock Gating Control */
#define SYSCON_RCGC1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Clock Gating Control */
#define SYSCON_RCGC1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Clock Gating Control */
#define SYSCON_RCGC1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Clock Gating Control */
#define SYSCON_RCGC1_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Clock Gating */
#define SYSCON_RCGC1_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Clock Gating */
/* Run Mode Clock Gating Control Register 2 (RCGC2), offset 0x108 */
#define SYSCON_RCGC2_GPIOA (1 << 0) /* Bit 0: Port A Clock Gating Control */
#define SYSCON_RCGC2_GPIOB (1 << 1) /* Bit 1: Port B Clock Gating Control */
#define SYSCON_RCGC2_GPIOC (1 << 2) /* Bit 2: Port C Clock Gating Control */
#define SYSCON_RCGC2_GPIOD (1 << 3) /* Bit 3: Port D Clock Gating Control */
#define SYSCON_RCGC2_GPIOE (1 << 4) /* Bit 4: Port E Clock Gating Control */
#define SYSCON_RCGC2_GPIOF (1 << 5) /* Bit 5: Port F Clock Gating Control */
#define SYSCON_RCGC2_GPIOG (1 << 6) /* Bit 6: Port G Clock Gating Control */
#define SYSCON_RCGC2_GPIOH (1 << 7) /* Bit 7: Port H Clock Gating Control */
#define SYSCON_RCGC2_EMAC0 (1 << 28) /* Bit 28: MAC0 Clock Gating Control */
#define SYSCON_RCGC2_EPHY0 (1 << 30) /* Bit 30: PHY0 Clock Gating Control */
/* Sleep Mode Clock Gating Control Register 0 (SCGC0), offset 0x110 */
#define SYSCON_SCGC0_WDT (1 << 3) /* Bit 3: WDT Clock Gating Control */
#define SYSCON_SCGC0_HIB (1 << 6) /* Bit 6: HIB Clock Gating Control */
#define SYSCON_SCGC0_MAXADCSPD_SHIFT 8 /* Bits 9-8: ADC Sample Speed */
#define SYSCON_SCGC0_MAXADCSPD_MASK (0x03 << SYSCON_SCGC0_MAXADCSPD_SHIFT)
#define SYSCON_SCGC0_ADC (1 << 16) /* Bit 16: ADC0 Clock Gating Control */
/* Sleep Mode Clock Gating Control Register 1 (SCGC1), offset 0x114 */
#define SYSCON_SCGC1_UART0 (1 << 0) /* Bit 0: UART0 Clock Gating Control */
#define SYSCON_SCGC1_UART1 (1 << 1) /* Bit 1: UART1 Clock Gating Control */
#define SYSCON_SCGC1_SSI0 (1 << 4) /* Bit 4: SSI0 Clock Gating Control */
#define SYSCON_SCGC1_SSI1 (1 << 5) /* Bit 5: SSI1 Clock Gating Control */
#define SYSCON_SCGC1_I2C0 (1 << 12) /* Bit 12: I2C0 Clock Gating Control */
#define SYSCON_SCGC1_I2C1 (1 << 14) /* Bit 14: I2C1 Clock Gating Control */
#define SYSCON_SCGC1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Clock Gating Control */
#define SYSCON_SCGC1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Clock Gating Control */
#define SYSCON_SCGC1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Clock Gating Control */
#define SYSCON_SCGC1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Clock Gating Control */
#define SYSCON_SCGC1_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Clock Gating */
#define SYSCON_SCGC1_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Clock Gating */
/* Sleep Mode Clock Gating Control Register 2 (SCGC2), offset 0x118 */
#define SYSCON_SCGC2_GPIOA (1 << 0) /* Bit 0: Port A Clock Gating Control */
#define SYSCON_SCGC2_GPIOB (1 << 1) /* Bit 1: Port B Clock Gating Control */
#define SYSCON_SCGC2_GPIOC (1 << 2) /* Bit 2: Port C Clock Gating Control */
#define SYSCON_SCGC2_GPIOD (1 << 3) /* Bit 3: Port D Clock Gating Control */
#define SYSCON_SCGC2_GPIOE (1 << 4) /* Bit 4: Port E Clock Gating Control */
#define SYSCON_SCGC2_GPIOF (1 << 5) /* Bit 5: Port F Clock Gating Control */
#define SYSCON_SCGC2_GPIOG (1 << 6) /* Bit 6: Port G Clock Gating Control */
#define SYSCON_SCGC2_GPIOH (1 << 7) /* Bit 7: Port H Clock Gating Control */
#define SYSCON_SCGC2_EMAC0 (1 << 28) /* Bit 28: MAC0 Clock Gating Control */
#define SYSCON_SCGC2_EPHY0 (1 << 30) /* Bit 30: PHY0 Clock Gating Control */
/* Deep Sleep Mode Clock Gating Control Register 0 (DCGC0), offset 0x120 */
#define SYSCON_DCGC0_WDT (1 << 3) /* Bit 3: WDT Clock Gating Control */
#define SYSCON_DCGC0_HIB (1 << 6) /* Bit 6: HIB Clock Gating Control */
#define SYSCON_DCGC0_MAXADCSPD_SHIFT 8 /* Bits 9-8: ADC Sample Speed */
#define SYSCON_DCGC0_MAXADCSPD_MASK (0x03 << SYSCON_DCGC0_MAXADCSPD_SHIFT)
#define SYSCON_DCGC0_ADC (1 << 16) /* Bit 16: ADC0 Clock Gating Control */
/* Deep Sleep Mode Clock Gating Control Register 1 (DCGC1), offset 0x124 */
#define SYSCON_DCGC1_UART0 (1 << 0) /* Bit 0: UART0 Clock Gating Control */
#define SYSCON_DCGC1_UART1 (1 << 1) /* Bit 1: UART1 Clock Gating Control */
#define SYSCON_DCGC1_SSI0 (1 << 4) /* Bit 4: SSI0 Clock Gating Control */
#define SYSCON_DCGC1_SSI1 (1 << 5) /* Bit 5: SSI1 Clock Gating Control */
#define SYSCON_DCGC1_I2C0 (1 << 12) /* Bit 12: I2C0 Clock Gating Control */
#define SYSCON_DCGC1_I2C1 (1 << 14) /* Bit 14: I2C1 Clock Gating Control */
#define SYSCON_DCGC1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Clock Gating Control */
#define SYSCON_DCGC1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Clock Gating Control */
#define SYSCON_DCGC1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Clock Gating Control */
#define SYSCON_DCGC1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Clock Gating Control */
#define SYSCON_DCGC1_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Clock Gating */
#define SYSCON_DCGC1_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Clock Gating */
/* Deep Sleep Mode Clock Gating Control Register 2 (DCGC2), offset 0x128 */
#define SYSCON_DCGC2_GPIOA (1 << 0) /* Bit 0: Port A Clock Gating Control */
#define SYSCON_DCGC2_GPIOB (1 << 1) /* Bit 1: Port B Clock Gating Control */
#define SYSCON_DCGC2_GPIOC (1 << 2) /* Bit 2: Port C Clock Gating Control */
#define SYSCON_DCGC2_GPIOD (1 << 3) /* Bit 3: Port D Clock Gating Control */
#define SYSCON_DCGC2_GPIOE (1 << 4) /* Bit 4: Port E Clock Gating Control */
#define SYSCON_DCGC2_GPIOF (1 << 5) /* Bit 5: Port F Clock Gating Control */
#define SYSCON_DCGC2_GPIOG (1 << 6) /* Bit 6: Port G Clock Gating Control */
#define SYSCON_DCGC2_GPIOH (1 << 7) /* Bit 7: Port H Clock Gating Control */
#define SYSCON_DCGC2_EMAC0 (1 << 28) /* Bit 28: MAC0 Clock Gating Control */
#define SYSCON_DCGC2_EPHY0 (1 << 30) /* Bit 30: PHY0 Clock Gating Control */
/* Deep Sleep Clock Configuration (DSLPCLKCFG), offset 0x144 */
#define SYSCON_DSLPCLKCFG_DSDIVORIDE_SHIFT 23 /* Bits 28-23: Divider Field Override */
#define SYSCON_DSLPCLKCFG_DSDIVORIDE_MASK (0x3f << SYSCON_DSLPCLKCFG_DSDIVORIDE_SHIFT)
#define SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT 4 /* Bits 6-4: Clock Source */
#define SYSCON_DSLPCLKCFG_DSOSCSRC_MASK (0x07 << SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT)
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_LM3S_LM3S_SYSCONTROL_H */