/****************************************************************************
* arch/arm/src/lpc17xx/lpc17_allocateheap.c
*
* Copyright (C) 2010-2011, 2013, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <nuttx/kmalloc.h>
#include <arch/board/board.h>
#include "chip.h"
#include "mpu.h"
#include "up_arch.h"
#include "up_internal.h"
#include "chip/lpc17_memorymap.h"
#include "lpc17_emacram.h"
#include "lpc17_ohciram.h"
#include "lpc17_mpuinit.h"
/****************************************************************************
* Private Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* The configured RAM start address must be the beginning of CPU SRAM */
#if CONFIG_RAM_START != LPC17_SRAM_BASE
# warning "CONFIG_RAM_START is not at LPC17_SRAM_BASE"
# undef CONFIG_RAM_START
# undef CONFIG_RAM_END
# define CONFIG_RAM_START LPC17_SRAM_BASE
# define CONFIG_RAM_END (LPC17_SRAM_BASE+LPC17_CPUSRAM_SIZE)
#endif
/* The configured RAM size must be less then or equal to the CPU SRAM size */
#if CONFIG_RAM_SIZE > LPC17_CPUSRAM_SIZE
# warning "CONFIG_RAM_SIZE is larger than the size of CPU SRAM"
# undef CONFIG_RAM_SIZE
# undef CONFIG_RAM_END
# define CONFIG_RAM_SIZE LPC17_CPUSRAM_SIZE
# define CONFIG_RAM_END (LPC17_SRAM_BASE+LPC17_CPUSRAM_SIZE)
#elif CONFIG_RAM_SIZE < LPC17_CPUSRAM_SIZE
# warning "CONFIG_RAM_END is before end of CPU SRAM... not all of CPU SRAM used"
#endif
/* Figure out how much heap be have in AHB SRAM (if any). Complications:
* 1) AHB SRAM Bank 0 or 1 may on may not be supported in the hardware.
* 2) Some or all of Bank 0 may be used for Ethernet Packet buffering.
* Ethernet packet buffering is used from the beginning of Bank 0 and
* any free memory at the end of Bank 0 will be contiguous with any
* free memory at the beginning of Bank 1.
* 3) Some or all of Bank 1 may be used for OHCI descriptor memory. OCHI
* memory is used from the end of Bank 1 and any free memory at the
* beginning of Bank 1 will be contiguous with any free memory at the
* end of Bank 0.
*/
#undef LPC17_AHB_HEAPBASE /* Assume that nothing is available */
#undef LPC17_AHB_HEAPSIZE
/* If we have Bank 0, then we may possibly also have Bank 1 */
#ifdef LPC17_HAVE_BANK0
/* We have BANK0 (and, hence, possibly Bank1). Is Bank0 all used for
* Ethernet packet buffering? Or is there any part of Bank0 available for
* the heap.
*/
# ifdef LPC17_BANK0_HEAPSIZE
/* Some or all of Bank0 is available for the heap. The heap will begin
* in bank 1.
*/
# define LPC17_AHB_HEAPBASE LPC17_BANK0_HEAPBASE
/* Is Bank1 present? Has there available heap memory in Bank 1? */
# if defined(LPC17_HAVE_BANK1) && defined(LPC17_BANK1_HEAPSIZE)
/* Yes... the heap space available is the unused memory at the end
* of Bank0 plus the unused memory at the beginning of Bank 1.
*/
# define LPC17_AHB_HEAPSIZE (LPC17_BANK0_HEAPSIZE + LPC17_BANK1_HEAPSIZE)
# else
/* No... the heap space available is only the unused memory at the
* end of Bank 0.
*/
# define LPC17_AHB_HEAPSIZE LPC17_BANK0_HEAPSIZE
# endif /* LPC17_HAVE_BANK1 && LPC17_BANK1_HEAPSIZE */
# else /* !LPC17_BANK0_HEAPSIZE */
/* We have Bnak 0, but no memory is available for the heap there.
* Do we have Bank 1? Is any heap memory available in Bank 1?
*/
# if defined(LPC17_HAVE_BANK1) && defined(LPC17_BANK1_HEAPSIZE)
/* Yes... the heap space available is the unused memory at the
* beginning of Bank1.
*/
# define LPC17_AHB_HEAPBASE LPC17_BANK1_HEAPBASE
# define LPC17_AHB_HEAPSIZE LPC17_BANK1_HEAPSIZE
# endif /* LPC17_HAVE_BANK1 && LPC17_BANK1_HEAPSIZE */
# endif /* LPC17_BANK0_HEAPSIZE */
#endif /* LPC17_HAVE_BANK0 */
/* Sanity checking */
#ifdef LPC17_AHB_HEAPBASE
# if CONFIG_MM_REGIONS < 2
# warning "CONFIG_MM_REGIONS < 2: Available AHB SRAM Bank(s) not included in HEAP"
# endif
# if CONFIG_MM_REGIONS > 2
# warning "CONFIG_MM_REGIONS > 2: Are additional regions handled by application?"
# endif
#else
# if CONFIG_MM_REGIONS > 1
# warning "CONFIG_MM_REGIONS > 1: This configuration has no available AHB SRAM Bank0/1"
# warning "CONFIG_MM_REGIONS > 1: Are additional regions handled by application?"
# endif
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_allocate_heap
*
* Description:
* This function will be called to dynamically set aside the heap region.
*
* For the kernel build (CONFIG_BUILD_PROTECTED=y) with both kernel- and
* user-space heaps (CONFIG_MM_KERNEL_HEAP=y), this function provides the
* size of the unprotected, user-space heap.
*
* If a protected kernel-space heap is provided, the kernel heap must be
* allocated (and protected) by an analogous up_allocate_kheap().
*
* The following memory map is assumed for the flat build:
*
* .data region. Size determined at link time.
* .bss region Size determined at link time.
* IDLE thread stack. Size determined by CONFIG_IDLETHREAD_STACKSIZE.
* Heap. Extends to the end of SRAM.
*
* The following memory map is assumed for the kernel build:
*
* Kernel .data region. Size determined at link time.
* Kernel .bss region Size determined at link time.
* Kernel IDLE thread stack. Size determined by CONFIG_IDLETHREAD_STACKSIZE.
* Padding for alignment
* User .data region. Size determined at link time.
* User .bss region Size determined at link time.
* Kernel heap. Size determined by CONFIG_MM_KERNEL_HEAPSIZE.
* User heap. Extends to the end of SRAM.
*
****************************************************************************/
void up_allocate_heap(FAR void **heap_start, size_t *heap_size)
{
#if defined(CONFIG_BUILD_PROTECTED) && defined(CONFIG_MM_KERNEL_HEAP)
/* Get the unaligned size and position of the user-space heap.
* This heap begins after the user-space .bss section at an offset
* of CONFIG_MM_KERNEL_HEAPSIZE (subject to alignment).
*/
uintptr_t ubase = (uintptr_t)USERSPACE->us_bssend + CONFIG_MM_KERNEL_HEAPSIZE;
size_t usize = CONFIG_RAM_END - ubase;
int log2;
DEBUGASSERT(ubase < (uintptr_t)CONFIG_RAM_END);
/* Adjust that size to account for MPU alignment requirements.
* NOTE that there is an implicit assumption that the CONFIG_RAM_END
* is aligned to the MPU requirement.
*/
log2 = (int)mpu_log2regionfloor(usize);
DEBUGASSERT((CONFIG_RAM_END & ((1 << log2) - 1)) == 0);
usize = (1 << log2);
ubase = CONFIG_RAM_END - usize;
/* Return the user-space heap settings */
board_led_on(LED_HEAPALLOCATE);
*heap_start = (FAR void*)ubase;
*heap_size = usize;
/* Allow user-mode access to the user heap memory */
lpc17_mpu_uheap((uintptr_t)ubase, usize);
#else
/* Return the heap settings */
board_led_on(LED_HEAPALLOCATE);
*heap_start = (FAR void*)g_idle_topstack;
*heap_size = CONFIG_RAM_END - g_idle_topstack;
#endif
}
/****************************************************************************
* Name: up_allocate_kheap
*
* Description:
* For the kernel build (CONFIG_BUILD_PROTECTED=y) with both kernel- and
* user-space heaps (CONFIG_MM_KERNEL_HEAP=y), this function allocates
* (and protects) the kernel-space heap.
*
****************************************************************************/
#if defined(CONFIG_BUILD_PROTECTED) && defined(CONFIG_MM_KERNEL_HEAP)
void up_allocate_kheap(FAR void **heap_start, size_t *heap_size)
{
/* Get the unaligned size and position of the user-space heap.
* This heap begins after the user-space .bss section at an offset
* of CONFIG_MM_KERNEL_HEAPSIZE (subject to alignment).
*/
uintptr_t ubase = (uintptr_t)USERSPACE->us_bssend + CONFIG_MM_KERNEL_HEAPSIZE;
size_t usize = CONFIG_RAM_END - ubase;
int log2;
DEBUGASSERT(ubase < (uintptr_t)CONFIG_RAM_END);
/* Adjust that size to account for MPU alignment requirements.
* NOTE that there is an implicit assumption that the CONFIG_RAM_END
* is aligned to the MPU requirement.
*/
log2 = (int)mpu_log2regionfloor(usize);
DEBUGASSERT((CONFIG_RAM_END & ((1 << log2) - 1)) == 0);
usize = (1 << log2);
ubase = CONFIG_RAM_END - usize;
/* Return the kernel heap settings (i.e., the part of the heap region
* that was not dedicated to the user heap).
*/
*heap_start = (FAR void*)USERSPACE->us_bssend;
*heap_size = ubase - (uintptr_t)USERSPACE->us_bssend;
}
#endif
/************************************************************************
* Name: up_addregion
*
* Description:
* Memory may be added in non-contiguous chunks. Additional chunks are
* added by calling this function.
*
************************************************************************/
#if CONFIG_MM_REGIONS > 1
void up_addregion(void)
{
/* Banks 0 and 1 are each 16Kb. If both are present, they occupy a
* contiguous 32Kb memory region.
*
* If Ethernet is enabled, it will take some or all of bank 0 for packet
* buffering and descriptor tables; If USB host is enabled, it will take
* some or all of bank 1 for descriptor memory. The complex conditional
* compilation above should boil this all down to a very simple check
* here:
*
* Is any memory available in AHB SRAM for the heap?
*/
#ifdef LPC17_AHB_HEAPBASE
#if defined(CONFIG_BUILD_PROTECTED) && defined(CONFIG_MM_KERNEL_HEAP)
/* Yes.. allow user-mode access to the AHB SRAM user heap memory */
lpc17_mpu_uheap((uintptr_t)LPC17_AHB_HEAPBASE, LPC17_AHB_HEAPSIZE);
#endif
/* Add the AHB SRAM user heap region. */
kumm_addregion((FAR void*)LPC17_AHB_HEAPBASE, LPC17_AHB_HEAPSIZE);
#endif
}
#endif