|
|
/************************************************************************************************
* arch/arm/src/lpc313x/lpc313x_ADC.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC313X_ADC_H
#define __ARCH_ARM_SRC_LPC313X_ADC_H
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include "lpc313x_memorymap.h"
/************************************************************************************************
* Pre-processor Definitions
************************************************************************************************/
/* ADC register base address offset into the APB0 domain ****************************************/
#define LPC313X_ADC_VBASE (LPC313X_APB0_VSECTION+LPC313X_APB0_ADC_OFFSET)
#define LPC313X_ADC_PBASE (LPC313X_APB0_PSECTION+LPC313X_APB0_ADC_OFFSET)
/* ADC register offsets (with respect to the ADC base) ******************************************/
#define LPC313X_ADC_R0_OFFSET 0x000 /* Data for analog input channel 0 */
#define LPC313X_ADC_R1_OFFSET 0x004 /* Data for analog input channel 1 */
#define LPC313X_ADC_R2_OFFSET 0x008 /* Data for analog input channel 2 */
#define LPC313X_ADC_R3_OFFSET 0x00c /* Data for analog input channel 3 */
/* 0x010-0x01c: Reserved */
#define LPC313X_ADC_CON_OFFSET 0x020 /* ADC control register */
#define LPC313X_ADC_CSEL_OFFSET 0x024 /* Configure and select analog input channels */
#define LPC313X_ADC_INTEN_OFFSET 0x028 /* Enable ADC interrupts */
#define LPC313X_ADC_INTST_OFFSET 0x02C /* ADC interrupt status */
#define LPC313X_ADC_INTCLR_OFFSET 0x030 /* Clear ADC interrupt status */
/* 0x034-: Reserved */
/* ADC register (virtual) addresses *************************************************************/
#define LPC313X_ADC_R0 (LPC313X_ADC_VBASE+LPC313X_ADC_R0_OFFSET)
#define LPC313X_ADC_R1 (LPC313X_ADC_VBASE+LPC313X_ADC_R1_OFFSET)
#define LPC313X_ADC_R2 (LPC313X_ADC_VBASE+LPC313X_ADC_R2_OFFSET)
#define LPC313X_ADC_R3 (LPC313X_ADC_VBASE+LPC313X_ADC_R3_OFFSET)
#define LPC313X_ADC_CON (LPC313X_ADC_VBASE+LPC313X_ADC_CON_OFFSET)
#define LPC313X_ADC_CSEL (LPC313X_ADC_VBASE+LPC313X_ADC_CSEL_OFFSET)
#define LPC313X_ADC_INTEN (LPC313X_ADC_VBASE+LPC313X_ADC_INTEN_OFFSET)
#define LPC313X_ADC_INTST (LPC313X_ADC_VBASE+LPC313X_ADC_INTST_OFFSET)
#define LPC313X_ADC_INTCLR (LPC313X_ADC_VBASE+LPC313X_ADC_INTCLR_OFFSET)
/* ADC register bit definitions *****************************************************************/
/* ADC_Rx (ADC_R0, address 0x13002000; ADC_R1, address 0x13002004, ADC_R2, address 0x13002008;
* ADC_R3, address 0x1300200c)
*/
#define ADC_RX_SHIFT (0) /* Bits 0-9: Digital conversion data */
#define ADC_RX_MASK (0x3ff << ADC_RX_SHIFT)
/* ADC_CON, address 0x13002020 */
#define ADC_CON_STATUS (1 << 4) /* Bit 4: ADC Status */
#define ADC_CON_START (1 << 3) /* Bit 3: Start command */
#define ADC_CON_CSCAN (1 << 2) /* Bit 2: Continuous scan */
#define ADC_CON_ENABLE (1 << 1) /* Bit 1: ADC enable */
/* ADC_CSEL, address 0x13002024 */
#define ADC_CSEL_CHAN3_SHIFT (12) /* Bits 12-15: Select and configure channel 3*/
#define ADC_CSEL_CHAN3_MASK (15 << ADC_CSEL_CHAN3_SHIFT)
#define ADC_CSEL_CHAN2_SHIFT (8) /* Bits 8-10: Select and configure channel 2*/
#define ADC_CSEL_CHAN2_MASK (15 << ADC_CSEL_CHAN2_SHIFT)
#define ADC_CSEL_CHAN1_SHIFT (4) /* Bits 4-7: Select and configure channel 1*/
#define ADC_CSEL_CHAN1_MASK (15 << ADC_CSEL_CHAN1_SHIFT)
#define ADC_CSEL_CHAN0_SHIFT (0) /* Bits 0-3: Select and configure channel 0*/
#define ADC_CSEL_CHAN0_MASK (15 << ADC_CSEL_CHAN0_SHIFT)
/* ADC_INTEN, address 0x13002028 */
#define ADC_INTEN_ENABLE (1 << 0)
/* ADC_INTST, address 0x1300202c */
#define ADC_INTST_PENDING (1 << 0)
/* ADC_INTCLR, address 0x13002030 */
#define ADC_INTCLR_CLEAR (1 << 0)
/************************************************************************************************
* Public Types
************************************************************************************************/
/************************************************************************************************
* Public Data
************************************************************************************************/
/************************************************************************************************
* Public Functions
************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC313X_ADC_H */
|