|
|
/************************************************************************************************
* arch/arm/src/sam34/chip/sam4s_memorymap.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
#ifndef __ARCH_ARM_SRC_SAM34_CHIP_SAM4S_MEMORYMAP_H
#define __ARCH_ARM_SRC_SAM34_CHIP_SAM4S_MEMORYMAP_H
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
/************************************************************************************************
* Pre-processor Definitions
************************************************************************************************/
/* Address regions */
#define SAM_CODE_BASE 0x00000000 /* 0x00000000-0x1fffffff: Code space */
#define SAM_INTSRAM_BASE 0x20000000 /* 0x20000000-0x3fffffff: Internal SRAM */
#define SAM_PERIPHERALS_BASE 0x40000000 /* 0x40000000-0x5fffffff: Peripherals */
#define SAM_EXTRAM_BASE 0x60000000 /* 0x60000000-0x9fffffff: External RAM */
#define SAM_EXTDEV_BASE 0xa0000000 /* 0xa0000000-0xdfffffff: External device */
#define SAM_SYSTEM_BASE 0xe0000000 /* 0xe0000000-0xffffffff: System */
/* Code memory region */
#define SAM_BOOTMEMORY_BASE 0x00000000 /* 0x00000000-0x003fffff: Boot Memory */
#define SAM_INTFLASH_BASE 0x00400000 /* 0x00400000-0x007fffff: Internal FLASH */
#define SAM_INTROM_BASE 0x00800000 /* 0x00180000-0x00bfffff: Internal ROM */
/* 0x00c00000-0x1fffffff: Reserved */
/* Internal SRAM memory region */
#define SAM_INTSRAM0_BASE 0x20000000 /* For SAM3U compatibility */
#define SAM_BBSRAM_BASE 0x22000000 /* 0x22000000-0x23ffffff: 32MB bit-band region */
/* 0x24000000-0x3fffffff: Undefined */
/* Peripherals address region */
#define SAM_HSMCI_BASE 0x40000000 /* 0x40000000-0x400003ff: High Speed Multimedia Card Interface */
#define SAM_SSC_BASE 0x40004000 /* 0x40004000-0x40007fff: Synchronous Serial Controller */
#define SAM_SPI0_BASE 0x40008000 /* 0x40008000-0x4000bfff: Serial Peripheral Interface */
/* 0x4000c000-0x4000ffff: Reserved */
#define SAM_TC012_BASE 0x40010000 /* 0x40010000-0x400100bf: Timer Counters 0-2 */
# define SAM_TC0_BASE 0x40010000 /* 0x40010000-0x4001003f: Timer Counter 0 */
# define SAM_TC1_BASE 0x40010040 /* 0x40010040-0x4001007f: Timer Counter 1 */
# define SAM_TC2_BASE 0x40010080 /* 0x40010080-0x400100bf: Timer Counter 2 */
/* 0x400100c0-0x40013fff Reserved */
#define SAM_TC345_BASE 0x40014000 /* 0x40014000-0x400140bf: Timer Counters 3-5 */
# define SAM_TC3_BASE 0x40014000 /* 0x40014000-0x4001403f: Timer Counter 3 */
# define SAM_TC4_BASE 0x40014040 /* 0x40014040-0x4001407f: Timer Counter 4 */
# define SAM_TC5_BASE 0x40014080 /* 0x40014080-0x400140bf: Timer Counter 5 */
#define SAM_TWI_BASE 0x40018000 /* 0x40018000-0x4001ffff: Two-Wire Interface */
# define SAM_TWI0_BASE 0x40018000 /* 0x40018000-0x4001bfff: Two-Wire Interface 0 */
# define SAM_TWI1_BASE 0x4001c000 /* 0x4001c000-0x4001ffff: Two-Wire Interface 1 */
#define SAM_PWM_BASE 0x40020000 /* 0x40020000-0x4003ffff: Pulse Width Modulation */
#define SAM_USART_BASE 0x40024000 /* 0x40024000-0x4002bfff: USART */
# define SAM_USART0_BASE 0x40024000 /* 0x40024000-0x40023fff: USART0 */
# define SAM_USART1_BASE 0x40028000 /* 0x40028000-0x4002bfff: USART1 */
/* 0x4002C000-0x4002ffff: Reserved */
/* 0x40030000-0x40033fff: Reserved */
#define SAM_UDP_BASE 0x40034000 /* 0x40034000-0x40037fff: USB 2.0 Device */
#define SAM_ADC_BASE 0x40038000 /* 0x40038000-0x4003bfff: Analog To Digital Converter */
#define SAM_DACC_BASE 0x4003c000 /* 0x4003c000-0x4003ffff: Digital To Analog Converter */
#define SAM_ACC_BASE 0x40040000 /* 0x40040000-0x40043fff: Analog Comparator */
#define SAM_CRCCU_BASE 0x40044000 /* 0x40040000-0x40047fff: CRC Calculation Unit */
/* 0x40048000-0x400dffff: Reserved */
#define SAM_SYSCTRLR_BASE 0x400e0000 /* 0x400e0000-0x400e25ff: System Controller */
/* 0x400e2600-0x400fffff: Reserved */
/* 0x40100000-0x4002ffff: Reserved */
#define SAM_BBPERIPH_BASE 0x42000000 /* 0x42000000-0x43ffffff: 32MB bit-band region */
/* 0x44000000-0x5fffffff: Reserved */
/* System Controller Register Blocks: 0x400e0000-0x4007ffff */
#define SAM_SMC_BASE 0x400e0000 /* 0x400e0000-0x400e01ff: Static Memory Controller */
#define SAM_MATRIX_BASE 0x400e0200 /* 0x400e0200-0x400e03ff: MATRIX */
#define SAM_PMC_BASE 0x400e0400 /* 0x400e0400-0x400e05ff: Power Management Controller */
#define SAM_UART0_BASE 0x400e0600 /* 0x400e0600-0x400e073f: UART 0 */
#define SAM_CHIPID_BASE 0x400e0740 /* 0x400e0740-0x400e07ff: CHIP ID */
#define SAM_UART1_BASE 0x400e0800 /* 0x400e0800-0x400e0bff: UART 1 */
#define SAM_EEFC_BASE 0x400e0a00 /* 0x400e0a00-0x400e0bff: Enhanced Embedded Flash Controllers*/
# define SAM_EEFC0_BASE 0x400e0a00 /* 0x400e0a00-0x400e0bff: Enhanced Embedded Flash Controller 0 */
# define SAM_EEFC1_BASE 0x400e0c00 /* 0x400e0c00-0x400e0dff: Enhanced Embedded Flash Controller 1 */
#define SAM_PIO_BASE 0x400e0e00 /* 0x400e0e00-0x400e13ff: Parallel I/O Controllers */
# define SAM_PION_BASE(n) (0x400e0e00 + ((n) << 9))
# define SAM_PIOA_BASE 0x400e0e00 /* 0x400e0e00-0x400e0fff: Parallel I/O Controller A */
# define SAM_PIOB_BASE 0x400e1000 /* 0x400e1000-0x400e11ff: Parallel I/O Controller B */
# define SAM_PIOC_BASE 0x400e1200 /* 0x400e1200-0x400e13ff: Parallel I/O Controller C */
#define SAM_RSTC_BASE 0x400e1400 /* 0x400e1400-0x400e140f: Reset Controller */
#define SAM_SUPC_BASE 0x400e1410 /* 0x400e1410-0x400e142f: Supply Controller */
#define SAM_RTT_BASE 0x400e1430 /* 0x400e1430-0x400e144f: Real Time Timer */
#define SAM_WDT_BASE 0x400e1450 /* 0x400e1250-0x400e145f: Watchdog Timer */
#define SAM_RTC_BASE 0x400e1460 /* 0x400e1460-0x400e148f: Real Time Clock */
#define SAM_GPBR_BASE 0x400e1490 /* 0x400e1490-0x400e15ff: GPBR */
/* 0x400e1600-0x4007ffff: Reserved */
/* External RAM memory region */
#define SAM_EXTCS_BASE 0x60000000 /* 0x60000000-0x63ffffff: Chip selects */
# define SAM_EXTCSN_BASE(n) (0x60000000 + ((n) << 24))
# define SAM_EXTCS0_BASE 0x60000000 /* 0x60000000-0x60ffffff: Chip select 0 */
# define SAM_EXTCS1_BASE 0x61000000 /* 0x61000000-0x601fffff: Chip select 1 */
# define SAM_EXTCS2_BASE 0x62000000 /* 0x62000000-0x62ffffff: Chip select 2 */
# define SAM_EXTCS3_BASE 0x63000000 /* 0x63000000-0x63ffffff: Chip select 3 */
/* 0x64000000-0x9fffffff: Reserved */
/* System memory region */
#define SAM_PRIVPERIPH_BASE 0xe0000000 /* 0xe0000000-0xe00fffff: Private peripheral bus */
#define SAM_VENDOR_BASE 0xe0100000 /* 0ex0100000-0xffffffff: Vendor-specific memory */
/************************************************************************************************
* Public Types
************************************************************************************************/
/************************************************************************************************
* Public Data
************************************************************************************************/
/************************************************************************************************
* Public Functions
************************************************************************************************/
#endif /* __ARCH_ARM_SRC_SAM34_CHIP_SAM4S_MEMORYMAP_H */
|