/************************************************************************************
* arch/arm/src/sam34/sam_dmac.h
*
* Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_SAM34_SAM_DMAC_H
#define __ARCH_ARM_SRC_SAM34_SAM_DMAC_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include "chip.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_DMA
#endif
/* DMA ******************************************************************************/
/* Flags used to characterize the desired DMA channel. The naming convention is that
* one side is the peripheral and the other is memory (however, the interface could still
* be used if, for example, both sides were memory although the naming would be awkward)
*/
/* Unchange-able properties of the channel */
/* Bit 0: Not used */
#define DMACH_FLAG_FIFOSIZE_SHIFT (1) /* Bit 1: Size of DMA FIFO */
#define DMACH_FLAG_FIFOSIZE_MASK (1 << DMACH_FLAG_FIFOSIZE_SHIFT)
# define DMACH_FLAG_FIFO_8BYTES (0 << DMACH_FLAG_FIFOSIZE_SHIFT) /* 8 bytes */
# define DMACH_FLAG_FIFO_32BYTES (1 << DMACH_FLAG_FIFOSIZE_SHIFT) /* 32 bytes */
/* Configurable properties of the channel */
#define DMACH_FLAG_BURST_LARGEST 0 /* Largest length AHB burst */
#define DMACH_FLAG_BURST_HALF 1 /* Half FIFO size */
#define DMACH_FLAG_BURST_SINGLE 2 /* Single AHB access */
#define DMACH_FLAG_FIFOCFG_SHIFT (2) /* Bits 2-3: FIFO configuration */
#define DMACH_FLAG_FIFOCFG_MASK (3 << DMACH_FLAG_FIFOCFG_SHIFT)
# define DMACH_FLAG_FIFOCFG_LARGEST (DMACH_FLAG_BURST_LARGEST << DMACH_FLAG_FIFOCFG_SHIFT)
# define DMACH_FLAG_FIFOCFG_HALF (DMACH_FLAG_BURST_HALF << DMACH_FLAG_FIFOCFG_SHIFT)
# define DMACH_FLAG_FIFOCFG_SINGLE (DMACH_FLAG_BURST_SINGLE << DMACH_FLAG_FIFOCFG_SHIFT)
/* Peripheral endpoint characteristics */
#define DMACH_FLAG_PERIPHPID_SHIFT (4) /* Bits 4-7: Peripheral PID */
#define DMACH_FLAG_PERIPHPID_MASK (15 << DMACH_FLAG_PERIPHPID_SHIFT)
#define DMACH_FLAG_PERIPHH2SEL (1 << 8) /* Bits 8: HW handshaking */
#define DMACH_FLAG_PERIPHISPERIPH (1 << 9) /* Bits 9: 0=memory; 1=peripheral */
#define DMACH_FLAG_PERIPHWIDTH_SHIFT (10) /* Bits 10-11: Peripheral width */
#define DMACH_FLAG_PERIPHWIDTH_MASK (3 << DMACH_FLAG_PERIPHWIDTH_SHIFT)
# define DMACH_FLAG_PERIPHWIDTH_8BITS (0 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 8 bits */
# define DMACH_FLAG_PERIPHWIDTH_16BITS (1 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 16 bits */
# define DMACH_FLAG_PERIPHWIDTH_32BITS (2 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 32 bits */
#define DMACH_FLAG_PERIPHINCREMENT (1 << 12) /* Bit 12: Autoincrement peripheral address */
#define DMACH_FLAG_PERIPHCHUNKSIZE (1 << 13) /* Bit 13: Peripheral chunk size */
# define DMACH_FLAG_PERIPHCHUNKSIZE_1 (0) /* Peripheral chunksize = 1 */
# define DMACH_FLAG_PERIPHCHUNKSIZE_4 DMACH_FLAG_PERIPHCHUNKSIZE /* Peripheral chunksize = 4 */
/* Memory endpoint characteristics */
#define DMACH_FLAG_MEMPID_SHIFT (14) /* Bits 14-17: Memory PID */
#define DMACH_FLAG_MEMPID_MASK (15 << DMACH_FLAG_MEMPID_SHIFT)
#define DMACH_FLAG_MEMH2SEL (1 << 18) /* Bits 18: HW handshaking */
#define DMACH_FLAG_MEMISPERIPH (1 << 19) /* Bits 19: 0=memory; 1=peripheral */
#define DMACH_FLAG_MEMWIDTH_SHIFT (20) /* Bits 20-21: Memory width */
#define DMACH_FLAG_MEMWIDTH_MASK (3 << DMACH_FLAG_MEMWIDTH_SHIFT)
# define DMACH_FLAG_MEMWIDTH_8BITS (0 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 8 bits */
# define DMACH_FLAG_MEMWIDTH_16BITS (1 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 16 bits */
# define DMACH_FLAG_MEMWIDTH_32BITS (2 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 32 bits */
#define DMACH_FLAG_MEMINCREMENT (1 << 22) /* Bit 22: Autoincrement memory address */
#define DMACH_FLAG_MEMCHUNKSIZE (1 << 23) /* Bit 23: Memory chunk size */
# define DMACH_FLAG_MEMCHUNKSIZE_1 (0) /* Memory chunksize = 1 */
# define DMACH_FLAG_MEMCHUNKSIZE_4 DMACH_FLAG_MEMCHUNKSIZE /* Memory chunksize = 4 */
/* Bits 24-31: Not used */
/************************************************************************************
* Public Types
************************************************************************************/
typedef FAR void *DMA_HANDLE;
typedef void (*dma_callback_t)(DMA_HANDLE handle, void *arg, int result);
/* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */
#ifdef CONFIG_DEBUG_DMA
struct sam_dmaregs_s
{
/* Global Registers */
uint32_t gcfg; /* DMAC Global Configuration Register */
uint32_t en; /* DMAC Enable Register */
uint32_t sreq; /* DMAC Software Single Request Register */
uint32_t creq; /* DMAC Software Chunk Transfer Request Register */
uint32_t last; /* DMAC Software Last Transfer Flag Register */
uint32_t ebcimr; /* DMAC Error Mask */
uint32_t chsr; /* DMAC Channel Handler Status Register */
/* Channel Registers */
uint32_t saddr; /* DMAC Channel Source Address Register */
uint32_t daddr; /* DMAC Channel Destination Address Register */
uint32_t dscr; /* DMAC Channel Descriptor Address Register */
uint32_t ctrla; /* DMAC Channel Control A Register */
uint32_t ctrlb; /* DMAC Channel Control B Register */
uint32_t cfg; /* DMAC Channel Configuration Register */
};
#endif
/************************************************************************************
* Inline Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Data
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/****************************************************************************
* Name: sam_dmachannel
*
* Description:
* Allocate a DMA channel. This function sets aside a DMA channel with
* the required FIFO size and flow control capabilities (determined by
* dma_flags) then gives the caller exclusive access to the DMA channel.
*
* The naming convention in all of the DMA interfaces is that one side is
* the 'peripheral' and the other is 'memory'. Howerver, the interface
* could still be used if, for example, both sides were memory although
* the naming would be awkward.
*
* Returned Value:
* If a DMA channel if the required FIFO size is available, this function
* returns a non-NULL, void* DMA channel handle. NULL is returned on any
* failure.
*
****************************************************************************/
DMA_HANDLE sam_dmachannel(uint32_t dmach_flags);
/****************************************************************************
* Name: sam_dmaconfig
*
* Description:
* There are two channel usage models: (1) The channel is allocated and
* configured in one step. This is the typical case where a DMA channel
* performs a constant role. The alternative is (2) where the DMA channel
* is reconfigured on the fly. In this case, the chflags provided to
* sam_dmachannel are not used and sam_dmaconfig() is called before each
* DMA to configure the DMA channel appropriately.
*
* Returned Value:
* None
*
****************************************************************************/
void sam_dmaconfig(DMA_HANDLE handle, uint32_t chflags);
/****************************************************************************
* Name: sam_dmafree
*
* Description:
* Release a DMA channel. NOTE: The 'handle' used in this argument must
* NEVER be used again until sam_dmachannel() is called again to re-gain
* a valid handle.
*
* Returned Value:
* None
*
****************************************************************************/
void sam_dmafree(DMA_HANDLE handle);
/****************************************************************************
* Name: sam_dmatxsetup
*
* Description:
* Configure DMA for transmit of one buffer (memory to peripheral). This
* function may be called multiple times to handle large and/or dis-
* continuous transfers. Calls to sam_dmatxsetup() and sam_dmarxsetup()
* must not be intermixed on the same transfer, however.
*
****************************************************************************/
int sam_dmatxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr,
size_t nbytes);
/****************************************************************************
* Name: sam_dmarxsetup
*
* Description:
* Configure DMA for receipt of one buffer (peripheral to memory). This
* function may be called multiple times to handle large and/or dis-
* continuous transfers. Calls to sam_dmatxsetup() and sam_dmarxsetup()
* must not be intermixed on the same transfer, however.
*
****************************************************************************/
int sam_dmarxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr,
size_t nbytes);
/****************************************************************************
* Name: sam_dmastart
*
* Description:
* Start the DMA transfer
*
****************************************************************************/
int sam_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg);
/****************************************************************************
* Name: sam_dmastop
*
* Description:
* Cancel the DMA. After sam_dmastop() is called, the DMA channel is
* reset and sam_dmarx/txsetup() must be called before sam_dmastart() can be
* called again
*
****************************************************************************/
void sam_dmastop(DMA_HANDLE handle);
/****************************************************************************
* Name: sam_dmasample
*
* Description:
* Sample DMA register contents
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void sam_dmasample(DMA_HANDLE handle, struct sam_dmaregs_s *regs);
#else
# define sam_dmasample(handle,regs)
#endif
/****************************************************************************
* Name: sam_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void sam_dmadump(DMA_HANDLE handle, const struct sam_dmaregs_s *regs,
const char *msg);
#else
# define sam_dmadump(handle,regs,msg)
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_SAM34_SAM_DMAC_H */