/************************************************************************************
* arch/arm/src/tiva/chip/lm3s_vectors.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
* Vectors
************************************************************************************/
/* This file is included by tiva_vectors.S. It provides the macro VECTOR that
* supplies ach Stellaris vector in terms of a (lower-case) ISR label and an
* (upper-case) IRQ number as defined in arch/arm/include/tiva/lm3s_irq.h.
* tiva_vectors.S will define the VECTOR in different ways in order to generate
* the interrupt vectors and handlers in their final form.
*/
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
/* If the common ARMv7-M vector handling is used, then all it needs is the following
* definition that provides the number of supported vectors.
*/
#ifdef CONFIG_ARMV7M_CMNVECTOR
/* Reserve 71 interrupt table entries for I/O interrupts. */
# define ARMV7M_PERIPHERAL_INTERRUPTS 71
#else
VECTOR(tiva_gpioa, TIVA_IRQ_GPIOA) /* Vector 16: GPIO Port A */
VECTOR(tiva_gpiob, TIVA_IRQ_GPIOB) /* Vector 17: GPIO Port B */
VECTOR(tiva_gpioc, TIVA_IRQ_GPIOC) /* Vector 18: GPIO Port C */
VECTOR(tiva_gpiod, TIVA_IRQ_GPIOD) /* Vector 19: GPIO Port D */
VECTOR(tiva_gpioe, TIVA_IRQ_GPIOE) /* Vector 20: GPIO Port E */
VECTOR(tiva_uart0, TIVA_IRQ_UART0) /* Vector 21: UART 0 */
VECTOR(tiva_uart1, TIVA_IRQ_UART1) /* Vector 22: UART 1 */
VECTOR(tiva_ssi0, TIVA_IRQ_SSI0) /* Vector 23: SSI 0 */
VECTOR(tiva_i2c0, TIVA_IRQ_I2C0) /* Vector 24: I2C 0 */
UNUSED(TIVA_RESERVED_25) /* Vector 25: Reserved */
UNUSED(TIVA_RESERVED_26) /* Vector 26: Reserved */
UNUSED(TIVA_RESERVED_27) /* Vector 27: Reserved */
UNUSED(TIVA_RESERVED_28) /* Vector 28: Reserved */
UNUSED(TIVA_RESERVED_29) /* Vector 29: Reserved */
VECTOR(tiva_adc0, TIVA_IRQ_ADC0) /* Vector 30: ADC Sequence 0 */
VECTOR(tiva_adc1, TIVA_IRQ_ADC1) /* Vector 31: ADC Sequence 1 */
VECTOR(tiva_adc2, TIVA_IRQ_ADC2) /* Vector 32: ADC Sequence 2 */
VECTOR(tiva_adc3, TIVA_IRQ_ADC3) /* Vector 33: ADC Sequence 3 */
VECTOR(tiva_wdog, TIVA_IRQ_WDOG) /* Vector 34: Watchdog Timer */
VECTOR(tiva_tmr0a, TIVA_IRQ_TIMER0A) /* Vector 35: Timer 0 A */
VECTOR(tiva_tmr0b, TIVA_IRQ_TIMER0B) /* Vector 36: Timer 0 B */
VECTOR(tiva_tmr1a, TIVA_IRQ_TIMER1A) /* Vector 37: Timer 1 A */
VECTOR(tiva_tmr1b, TIVA_IRQ_TIMER1B) /* Vector 38: Timer 1 B */
VECTOR(tiva_tmr2a, TIVA_IRQ_TIMER2A) /* Vector 39: Timer 2 A */
VECTOR(tiva_tmr2b, TIVA_IRQ_TIMER2B) /* Vector 40: Timer 3 B */
VECTOR(tiva_cmp0, TIVA_IRQ_COMPARE0) /* Vector 41: Analog Comparator 0 */
VECTOR(tiva_cmp1, TIVA_IRQ_COMPARE1) /* Vector 42: Analog Comparator 1 */
UNUSED(TIVA_RESERVED_43) /* Vector 43: Reserved */
VECTOR(tiva_syscon, TIVA_IRQ_SYSCON) /* Vector 44: System Control */
VECTOR(tiva_flashcon, TIVA_IRQ_FLASHCON) /* Vector 45: FLASH Control */
VECTOR(tiva_gpiof, TIVA_IRQ_GPIOF) /* Vector 46: GPIO Port F */
VECTOR(tiva_gpiog, TIVA_IRQ_GPIOG) /* Vector 47: GPIO Port G */
VECTOR(tiva_gpioh, TIVA_IRQ_GPIOH) /* Vector 48: GPIO Port H */
UNUSED(TIVA_RESERVED_49) /* Vector 49: Reserved */
VECTOR(tiva_ssi1, TIVA_IRQ_SSI1) /* Vector 50: SSI 1 */
VECTOR(tiva_tmr3a, TIVA_IRQ_TIMER3A) /* Vector 51: Timer 3 A */
VECTOR(tiva_tmr3b, TIVA_IRQ_TIMER3B) /* Vector 52: Timer 3 B */
VECTOR(tiva_i2c1, TIVA_IRQ_I2C1) /* Vector 53: I2C 1 */
UNUSED(TIVA_RESERVED_54) /* Vector 54: Reserved */
UNUSED(TIVA_RESERVED_55) /* Vector 55: Reserved */
UNUSED(TIVA_RESERVED_56) /* Vector 56: Reserved */
UNUSED(TIVA_RESERVED_57) /* Vector 57: Reserved */
VECTOR(tiva_eth, TIVA_IRQ_ETHCON) /* Vector 58: Ethernet Controller */
VECTOR(tiva_hib, TIVA_IRQ_HIBERNATE) /* Vector 59: Hibernation Module */
UNUSED(TIVA_RESERVED_60) /* Vector 60: Reserved */
UNUSED(TIVA_RESERVED_61) /* Vector 61: Reserved */
UNUSED(TIVA_RESERVED_62) /* Vector 62: Reserved */
UNUSED(TIVA_RESERVED_63) /* Vector 63: Reserved */
UNUSED(TIVA_RESERVED_64) /* Vector 64: Reserved */
UNUSED(TIVA_RESERVED_65) /* Vector 65: Reserved */
UNUSED(TIVA_RESERVED_66) /* Vector 66: Reserved */
UNUSED(TIVA_RESERVED_67) /* Vector 67: Reserved */
UNUSED(TIVA_RESERVED_68) /* Vector 68: Reserved */
UNUSED(TIVA_RESERVED_69) /* Vector 69: Reserved */
UNUSED(TIVA_RESERVED_70) /* Vector 70: Reserved */
#endif
#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
/* If the common ARMv7-M vector handling is used, then all it needs is the following
* definition that provides the number of supported vectors.
*/
#ifdef CONFIG_ARMV7M_CMNVECTOR
/* Reserve 71 interrupt table entries for I/O interrupts. */
# define ARMV7M_PERIPHERAL_INTERRUPTS 71
#else
VECTOR(tiva_gpioa, TIVA_IRQ_GPIOA) /* Vector 16: GPIO Port A */
VECTOR(tiva_gpiob, TIVA_IRQ_GPIOB) /* Vector 17: GPIO Port B */
VECTOR(tiva_gpioc, TIVA_IRQ_GPIOC) /* Vector 18: GPIO Port C */
VECTOR(tiva_gpiod, TIVA_IRQ_GPIOD) /* Vector 19: GPIO Port D */
VECTOR(tiva_gpioe, TIVA_IRQ_GPIOE) /* Vector 20: GPIO Port E */
VECTOR(tiva_uart0, TIVA_IRQ_UART0) /* Vector 21: UART 0 */
VECTOR(tiva_uart1, TIVA_IRQ_UART1) /* Vector 22: UART 1 */
VECTOR(tiva_ssi0, TIVA_IRQ_SSI0) /* Vector 23: SSI 0 */
VECTOR(tiva_i2c0, TIVA_IRQ_I2C0) /* Vector 24: I2C 0 */
UNUSED(TIVA_RESERVED_25) /* Vector 25: Reserved */
VECTOR(tiva_pwm0, TIVA_IRQ_PWM0) /* Vector 26: PWM Generator 0 */
UNUSED(TIVA_RESERVED_27) /* Vector 27: Reserved */
UNUSED(TIVA_RESERVED_28) /* Vector 28: Reserved */
UNUSED(TIVA_RESERVED_29) /* Vector 29: Reserved */
VECTOR(tiva_adc0, TIVA_IRQ_ADC0) /* Vector 30: ADC Sequence 0 */
VECTOR(tiva_adc1, TIVA_IRQ_ADC1) /* Vector 31: ADC Sequence 1 */
VECTOR(tiva_adc2, TIVA_IRQ_ADC2) /* Vector 32: ADC Sequence 2 */
VECTOR(tiva_adc3, TIVA_IRQ_ADC3) /* Vector 33: ADC Sequence 3 */
VECTOR(tiva_wdog, TIVA_IRQ_WDOG) /* Vector 34: Watchdog Timer */
VECTOR(tiva_tmr0a, TIVA_IRQ_TIMER0A) /* Vector 35: Timer 0 A */
VECTOR(tiva_tmr0b, TIVA_IRQ_TIMER0B) /* Vector 36: Timer 0 B */
VECTOR(tiva_tmr1a, TIVA_IRQ_TIMER1A) /* Vector 37: Timer 1 A */
VECTOR(tiva_tmr1b, TIVA_IRQ_TIMER1B) /* Vector 38: Timer 1 B */
VECTOR(tiva_tmr2a, TIVA_IRQ_TIMER2A) /* Vector 39: Timer 2 A */
VECTOR(tiva_tmr2b, TIVA_IRQ_TIMER2B) /* Vector 40: Timer 3 B */
VECTOR(tiva_cmp0, TIVA_IRQ_COMPARE0) /* Vector 41: Analog Comparator 0 */
VECTOR(tiva_cmp1, TIVA_IRQ_COMPARE1) /* Vector 42: Analog Comparator 1 */
UNUSED(TIVA_RESERVED_43) /* Vector 43: Reserved */
VECTOR(tiva_syscon, TIVA_IRQ_SYSCON) /* Vector 44: System Control */
VECTOR(tiva_flashcon, TIVA_IRQ_FLASHCON) /* Vector 45: FLASH Control */
VECTOR(tiva_gpiof, TIVA_IRQ_GPIOF) /* Vector 46: GPIO Port F */
VECTOR(tiva_gpiog, TIVA_IRQ_GPIOG) /* Vector 47: GPIO Port G */
UNUSED(TIVA_RESERVED_48) /* Vector 48: Reserved */
UNUSED(TIVA_RESERVED_49) /* Vector 49: Reserved */
UNUSED(TIVA_RESERVED_50) /* Vector 50: Reserved */
UNUSED(TIVA_RESERVED_51) /* Vector 51: Reserved */
UNUSED(TIVA_RESERVED_52) /* Vector 52: Reserved */
UNUSED(TIVA_RESERVED_53) /* Vector 53: Reserved */
UNUSED(TIVA_RESERVED_54) /* Vector 54: Reserved */
UNUSED(TIVA_RESERVED_55) /* Vector 55: Reserved */
UNUSED(TIVA_RESERVED_56) /* Vector 56: Reserved */
UNUSED(TIVA_RESERVED_57) /* Vector 57: Reserved */
VECTOR(tiva_eth, TIVA_IRQ_ETHCON) /* Vector 58: Ethernet Controller */
UNUSED(TIVA_RESERVED_59) /* Vector 59: Reserved */
UNUSED(TIVA_RESERVED_60) /* Vector 60: Reserved */
UNUSED(TIVA_RESERVED_61) /* Vector 61: Reserved */
UNUSED(TIVA_RESERVED_62) /* Vector 62: Reserved */
UNUSED(TIVA_RESERVED_63) /* Vector 63: Reserved */
UNUSED(TIVA_RESERVED_64) /* Vector 64: Reserved */
UNUSED(TIVA_RESERVED_65) /* Vector 65: Reserved */
UNUSED(TIVA_RESERVED_66) /* Vector 66: Reserved */
UNUSED(TIVA_RESERVED_67) /* Vector 67: Reserved */
UNUSED(TIVA_RESERVED_68) /* Vector 68: Reserved */
UNUSED(TIVA_RESERVED_69) /* Vector 69: Reserved */
UNUSED(TIVA_RESERVED_70) /* Vector 70: Reserved */
#endif
#elif defined(CONFIG_ARCH_CHIP_LM3S6965)
/* If the common ARMv7-M vector handling is used, then all it needs is the following
* definition that provides the number of supported vectors.
*/
#ifdef CONFIG_ARMV7M_CMNVECTOR
/* Reserve 71 interrupt table entries for I/O interrupts. */
# define ARMV7M_PERIPHERAL_INTERRUPTS 71
#else
VECTOR(tiva_gpioa, TIVA_IRQ_GPIOA) /* Vector 16: GPIO Port A */
VECTOR(tiva_gpiob, TIVA_IRQ_GPIOB) /* Vector 17: GPIO Port B */
VECTOR(tiva_gpioc, TIVA_IRQ_GPIOC) /* Vector 18: GPIO Port C */
VECTOR(tiva_gpiod, TIVA_IRQ_GPIOD) /* Vector 19: GPIO Port D */
VECTOR(tiva_gpioe, TIVA_IRQ_GPIOE) /* Vector 20: GPIO Port E */
VECTOR(tiva_uart0, TIVA_IRQ_UART0) /* Vector 21: UART 0 */
VECTOR(tiva_uart1, TIVA_IRQ_UART1) /* Vector 22: UART 1 */
VECTOR(tiva_ssi0, TIVA_IRQ_SSI0) /* Vector 23: SSI 0 */
VECTOR(tiva_i2c0, TIVA_IRQ_I2C0) /* Vector 24: I2C 0 */
VECTOR(tiva_pwmfault, TIVA_IRQ_PWMFAULT) /* Vector 25: PWM Fault */
VECTOR(tiva_pwm0, TIVA_IRQ_PWM0) /* Vector 26: PWM Generator 0 */
VECTOR(tiva_pwm1, TIVA_IRQ_PWM1) /* Vector 27: PWM Generator 1 */
VECTOR(tiva_pwm2, TIVA_IRQ_PWM2) /* Vector 28: PWM Generator 2 */
VECTOR(tiva_qei0, TIVA_IRQ_QEI0) /* Vector 29: QEI 0 */
VECTOR(tiva_adc0, TIVA_IRQ_ADC0) /* Vector 30: ADC Sequence 0 */
VECTOR(tiva_adc1, TIVA_IRQ_ADC1) /* Vector 31: ADC Sequence 1 */
VECTOR(tiva_adc2, TIVA_IRQ_ADC2) /* Vector 32: ADC Sequence 2 */
VECTOR(tiva_adc3, TIVA_IRQ_ADC3) /* Vector 33: ADC Sequence 3 */
VECTOR(tiva_wdog, TIVA_IRQ_WDOG) /* Vector 34: Watchdog Timer */
VECTOR(tiva_tmr0a, TIVA_IRQ_TIMER0A) /* Vector 35: Timer 0 A */
VECTOR(tiva_tmr0b, TIVA_IRQ_TIMER0B) /* Vector 36: Timer 0 B */
VECTOR(tiva_tmr1a, TIVA_IRQ_TIMER1A) /* Vector 37: Timer 1 A */
VECTOR(tiva_tmr1b, TIVA_IRQ_TIMER1B) /* Vector 38: Timer 1 B */
VECTOR(tiva_tmr2a, TIVA_IRQ_TIMER2A) /* Vector 39: Timer 2 A */
VECTOR(tiva_tmr2b, TIVA_IRQ_TIMER2B) /* Vector 40: Timer 3 B */
VECTOR(tiva_cmp0, TIVA_IRQ_COMPARE0) /* Vector 41: Analog Comparator 0 */
VECTOR(tiva_cmp1, TIVA_IRQ_COMPARE1) /* Vector 42: Analog Comparator 1 */
UNUSED(TIVA_RESERVED_43) /* Vector 43: Reserved */
VECTOR(tiva_syscon, TIVA_IRQ_SYSCON) /* Vector 44: System Control */
VECTOR(tiva_flashcon, TIVA_IRQ_FLASHCON) /* Vector 45: FLASH Control */
VECTOR(tiva_gpiof, TIVA_IRQ_GPIOF) /* Vector 46: GPIO Port F */
VECTOR(tiva_gpiog, TIVA_IRQ_GPIOG) /* Vector 47: GPIO Port G */
UNUSED(TIVA_RESERVED_48) /* Vector 48: Reserved */
VECTOR(tiva_uart2, TIVA_IRQ_UART1) /* Vector 49: UART 1 */
UNUSED(TIVA_RESERVED_50) /* Vector 50: Reserved */
VECTOR(tiva_tmr3a, TIVA_IRQ_TIMER3A) /* Vector 51: Timer 3 A */
VECTOR(tiva_tmr3b, TIVA_IRQ_TIMER3B) /* Vector 52: Timer 3 B */
VECTOR(tiva_i2c1, TIVA_IRQ_I2C1) /* Vector 53: I2C 1 */
VECTOR(tiva_qei1, TIVA_IRQ_QEI1) /* Vector 54: QEI 1 */
UNUSED(TIVA_RESERVED_55) /* Vector 55: Reserved */
UNUSED(TIVA_RESERVED_56) /* Vector 56: Reserved */
UNUSED(TIVA_RESERVED_57) /* Vector 57: Reserved */
VECTOR(tiva_eth, TIVA_IRQ_ETHCON) /* Vector 58: Ethernet Controller */
VECTOR(tiva_hib, TIVA_IRQ_HIBERNATE) /* Vector 59: Hibernation Module */
UNUSED(TIVA_RESERVED_60) /* Vector 60: Reserved */
UNUSED(TIVA_RESERVED_61) /* Vector 61: Reserved */
UNUSED(TIVA_RESERVED_62) /* Vector 62: Reserved */
UNUSED(TIVA_RESERVED_63) /* Vector 63: Reserved */
UNUSED(TIVA_RESERVED_64) /* Vector 64: Reserved */
UNUSED(TIVA_RESERVED_65) /* Vector 65: Reserved */
UNUSED(TIVA_RESERVED_66) /* Vector 66: Reserved */
UNUSED(TIVA_RESERVED_67) /* Vector 67: Reserved */
UNUSED(TIVA_RESERVED_68) /* Vector 68: Reserved */
UNUSED(TIVA_RESERVED_69) /* Vector 69: Reserved */
UNUSED(TIVA_RESERVED_70) /* Vector 70: Reserved */
#endif
#elif defined(CONFIG_ARCH_CHIP_LM3S8962)
/* If the common ARMv7-M vector handling is used, then all it needs is the following
* definition that provides the number of supported vectors.
*/
#ifdef CONFIG_ARMV7M_CMNVECTOR
/* Reserve 71 interrupt table entries for I/O interrupts. */
# define ARMV7M_PERIPHERAL_INTERRUPTS 71
#else
VECTOR(tiva_gpioa, TIVA_IRQ_GPIOA) /* Vector 16: GPIO Port A */
VECTOR(tiva_gpiob, TIVA_IRQ_GPIOB) /* Vector 17: GPIO Port B */
VECTOR(tiva_gpioc, TIVA_IRQ_GPIOC) /* Vector 18: GPIO Port C */
VECTOR(tiva_gpiod, TIVA_IRQ_GPIOD) /* Vector 19: GPIO Port D */
VECTOR(tiva_gpioe, TIVA_IRQ_GPIOE) /* Vector 20: GPIO Port E */
VECTOR(tiva_uart0, TIVA_IRQ_UART0) /* Vector 21: UART 0 */
VECTOR(tiva_uart1, TIVA_IRQ_UART1) /* Vector 22: UART 1 */
VECTOR(tiva_ssi0, TIVA_IRQ_SSI0) /* Vector 23: SSI 0 */
VECTOR(tiva_i2c0, TIVA_IRQ_I2C0) /* Vector 24: I2C 0 */
VECTOR(tiva_pwmfault, TIVA_IRQ_PWMFAULT) /* Vector 25: PWM Fault */
VECTOR(tiva_pwm0, TIVA_IRQ_PWM0) /* Vector 26: PWM Generator 0 */
VECTOR(tiva_pwm1, TIVA_IRQ_PWM1) /* Vector 27: PWM Generator 1 */
VECTOR(tiva_pwm2, TIVA_IRQ_PWM2) /* Vector 28: PWM Generator 2 */
VECTOR(tiva_qei0, TIVA_IRQ_QEI0) /* Vector 29: QEI 0 */
VECTOR(tiva_adc0, TIVA_IRQ_ADC0) /* Vector 30: ADC Sequence 0 */
VECTOR(tiva_adc1, TIVA_IRQ_ADC1) /* Vector 31: ADC Sequence 1 */
VECTOR(tiva_adc2, TIVA_IRQ_ADC2) /* Vector 32: ADC Sequence 2 */
VECTOR(tiva_adc3, TIVA_IRQ_ADC3) /* Vector 33: ADC Sequence 3 */
VECTOR(tiva_wdog, TIVA_IRQ_WDOG) /* Vector 34: Watchdog Timer */
VECTOR(tiva_tmr0a, TIVA_IRQ_TIMER0A) /* Vector 35: Timer 0 A */
VECTOR(tiva_tmr0b, TIVA_IRQ_TIMER0B) /* Vector 36: Timer 0 B */
VECTOR(tiva_tmr1a, TIVA_IRQ_TIMER1A) /* Vector 37: Timer 1 A */
VECTOR(tiva_tmr1b, TIVA_IRQ_TIMER1B) /* Vector 38: Timer 1 B */
VECTOR(tiva_tmr2a, TIVA_IRQ_TIMER2A) /* Vector 39: Timer 2 A */
VECTOR(tiva_tmr2b, TIVA_IRQ_TIMER2B) /* Vector 40: Timer 3 B */
VECTOR(tiva_cmp0, TIVA_IRQ_COMPARE0) /* Vector 41: Analog Comparator 0 */
UNUSED(TIVA_RESERVED_42) /* Vector 42: Reserved */
UNUSED(TIVA_RESERVED_43) /* Vector 43: Reserved */
VECTOR(tiva_syscon, TIVA_IRQ_SYSCON) /* Vector 44: System Control */
VECTOR(tiva_flashcon, TIVA_IRQ_FLASHCON) /* Vector 45: FLASH Control */
VECTOR(tiva_gpiof, TIVA_IRQ_GPIOF) /* Vector 46: GPIO Port F */
VECTOR(tiva_gpiog, TIVA_IRQ_GPIOG) /* Vector 47: GPIO Port G */
UNUSED(TIVA_RESERVED_48) /* Vector 48: Reserved */
UNUSED(TIVA_RESERVED_49) /* Vector 49: Reserved */
UNUSED(TIVA_RESERVED_50) /* Vector 50: Reserved */
VECTOR(tiva_tmr3a, TIVA_IRQ_TIMER3A) /* Vector 51: Timer 3 A */
VECTOR(tiva_tmr3b, TIVA_IRQ_TIMER3B) /* Vector 52: Timer 3 B */
VECTOR(tiva_i2c1, TIVA_IRQ_I2C1) /* Vector 53: I2C 1 */
VECTOR(tiva_qei1, TIVA_IRQ_QEI1) /* Vector 54: QEI 1 */
VECTOR(tiva_can0, TIVA_IRQ_CAN0) /* Vector 55: CAN 0 */
UNUSED(TIVA_RESERVED_56) /* Vector 56: Reserved */
UNUSED(TIVA_RESERVED_57) /* Vector 57: Reserved */
VECTOR(tiva_eth, TIVA_IRQ_ETHCON) /* Vector 58: Ethernet Controller */
VECTOR(tiva_hib, TIVA_IRQ_HIBERNATE) /* Vector 59: Hibernation Module */
UNUSED(TIVA_RESERVED_60) /* Vector 60: Reserved */
UNUSED(TIVA_RESERVED_61) /* Vector 61: Reserved */
UNUSED(TIVA_RESERVED_62) /* Vector 62: Reserved */
UNUSED(TIVA_RESERVED_63) /* Vector 63: Reserved */
UNUSED(TIVA_RESERVED_64) /* Vector 64: Reserved */
UNUSED(TIVA_RESERVED_65) /* Vector 65: Reserved */
UNUSED(TIVA_RESERVED_66) /* Vector 66: Reserved */
UNUSED(TIVA_RESERVED_67) /* Vector 67: Reserved */
UNUSED(TIVA_RESERVED_68) /* Vector 68: Reserved */
UNUSED(TIVA_RESERVED_69) /* Vector 69: Reserved */
UNUSED(TIVA_RESERVED_70) /* Vector 70: Reserved */
#endif
#elif defined(CONFIG_ARCH_CHIP_LM3S9B96)
/* If the common ARMv7-M vector handling is used, then all it needs is the following
* definition that provides the number of supported vectors.
*/
#ifdef CONFIG_ARMV7M_CMNVECTOR
/* Reserve 72 interrupt table entries for I/O interrupts. */
# define ARMV7M_PERIPHERAL_INTERRUPTS 72
#else
VECTOR(tiva_gpioa, TIVA_IRQ_GPIOA) /* Vector 16: GPIO Port A */
VECTOR(tiva_gpiob, TIVA_IRQ_GPIOB) /* Vector 17: GPIO Port B */
VECTOR(tiva_gpioc, TIVA_IRQ_GPIOC) /* Vector 18: GPIO Port C */
VECTOR(tiva_gpiod, TIVA_IRQ_GPIOD) /* Vector 19: GPIO Port D */
VECTOR(tiva_gpioe, TIVA_IRQ_GPIOE) /* Vector 20: GPIO Port E */
VECTOR(tiva_uart0, TIVA_IRQ_UART0) /* Vector 21: UART 0 */
VECTOR(tiva_uart1, TIVA_IRQ_UART1) /* Vector 22: UART 1 */
VECTOR(tiva_ssi0, TIVA_IRQ_SSI0) /* Vector 23: SSI 0 */
VECTOR(tiva_i2c0, TIVA_IRQ_I2C0) /* Vector 24: I2C 0 */
VECTOR(tiva_pwmfault, TIVA_IRQ_PWMFAULT) /* Vector 25: PWM Fault */
VECTOR(tiva_pwm0, TIVA_IRQ_PWM0) /* Vector 26: PWM Generator 0 */
VECTOR(tiva_pwm1, TIVA_IRQ_PWM1) /* Vector 27: PWM Generator 1 */
VECTOR(tiva_pwm2, TIVA_IRQ_PWM2) /* Vector 28: PWM Generator 2 */
VECTOR(tiva_qei0, TIVA_IRQ_QEI0) /* Vector 29: QEI 0 */
VECTOR(tiva_adc0, TIVA_IRQ_ADC0) /* Vector 30: ADC Sequence 0 */
VECTOR(tiva_adc1, TIVA_IRQ_ADC1) /* Vector 31: ADC Sequence 1 */
VECTOR(tiva_adc2, TIVA_IRQ_ADC2) /* Vector 32: ADC Sequence 2 */
VECTOR(tiva_adc3, TIVA_IRQ_ADC3) /* Vector 33: ADC Sequence 3 */
VECTOR(tiva_wdog, TIVA_IRQ_WDOG) /* Vector 34: Watchdog Timer */
VECTOR(tiva_tmr0a, TIVA_IRQ_TIMER0A) /* Vector 35: Timer 0 A */
VECTOR(tiva_tmr0b, TIVA_IRQ_TIMER0B) /* Vector 36: Timer 0 B */
VECTOR(tiva_tmr1a, TIVA_IRQ_TIMER1A) /* Vector 37: Timer 1 A */
VECTOR(tiva_tmr1b, TIVA_IRQ_TIMER1B) /* Vector 38: Timer 1 B */
VECTOR(tiva_tmr2a, TIVA_IRQ_TIMER2A) /* Vector 39: Timer 2 A */
VECTOR(tiva_tmr2b, TIVA_IRQ_TIMER2B) /* Vector 40: Timer 3 B */
VECTOR(tiva_cmp0, TIVA_IRQ_COMPARE0) /* Vector 41: Analog Comparator 0 */
VECTOR(tiva_cmp1, TIVA_IRQ_COMPARE1) /* Vector 42: Analog Comparator 1 */
VECTOR(tiva_cmp2, TIVA_IRQ_COMPARE2) /* Vector 43: Analog Comparator 2 */
VECTOR(tiva_syscon, TIVA_IRQ_SYSCON) /* Vector 44: System Control */
VECTOR(tiva_flashcon, TIVA_IRQ_FLASHCON) /* Vector 45: FLASH Control */
VECTOR(tiva_gpiof, TIVA_IRQ_GPIOF) /* Vector 46: GPIO Port F */
VECTOR(tiva_gpiog, TIVA_IRQ_GPIOG) /* Vector 47: GPIO Port G */
VECTOR(tiva_gpioh, TIVA_IRQ_GPIOH) /* Vector 48: GPIO Port H */
VECTOR(tiva_uart2, TIVA_IRQ_UART2) /* Vector 49: UART 2 */
VECTOR(tiva_ssi1, TIVA_IRQ_SSI1) /* Vector 50: GPIO Port H */
VECTOR(tiva_tmr3a, TIVA_IRQ_TIMER3A) /* Vector 51: Timer 3 A */
VECTOR(tiva_tmr3b, TIVA_IRQ_TIMER3B) /* Vector 52: Timer 3 B */
VECTOR(tiva_i2c1, TIVA_IRQ_I2C1) /* Vector 53: I2C 1 */
VECTOR(tiva_qei1, TIVA_IRQ_QEI1) /* Vector 54: QEI 1 */
VECTOR(tiva_can0, TIVA_IRQ_CAN0) /* Vector 55: CAN 0 */
VECTOR(tiva_can1, TIVA_IRQ_CAN1) /* Vector 56: CAN 1 */
UNUSED(TIVA_RESERVED_57) /* Vector 57: Reserved */
VECTOR(tiva_eth, TIVA_IRQ_ETHCON) /* Vector 58: Ethernet Controller */
UNUSED(TIVA_RESERVED_59) /* Vector 59: Reserved */
VECTOR(tiva_usb, TIVA_IRQ_USB) /* Vector 60: USB */
VECTOR(tiva_pwm3, TIVA_IRQ_PWM3) /* Vector 61: PWM 3 */
VECTOR(tiva_udmasoft, TIVA_IRQ_UDMASOFT) /* Vector 62: uDMA Software */
VECTOR(tiva_udmaerror, TIVA_IRQ_UDMAERROR) /* Vector 63: uDMA Error */
VECTOR(tiva_adc1_0, TIVA_IRQ_ADC1_0) /* Vector 64: ADC1 Sequence 0 */
VECTOR(tiva_adc1_1, TIVA_IRQ_ADC1_1) /* Vector 65: ADC1 Sequence 1 */
VECTOR(tiva_adc1_2, TIVA_IRQ_ADC1_2) /* Vector 66: ADC1 Sequence 2 */
VECTOR(tiva_adc1_3, TIVA_IRQ_ADC1_3) /* Vector 67: ADC1 Sequence 3 */
VECTOR(tiva_i2s0, TIVA_IRQ_I2S0) /* Vector 68: I2S 0 */
VECTOR(tiva_epi, TIVA_IRQ_EPI) /* Vector 69: EPI */
VECTOR(tiva_gpioj, TIVA_IRQ_GPIOJ) /* Vector 70: GPIO Port J */
UNUSED(TIVA_RESERVED_71) /* Vector 71: Reserved */
#endif
#else
# error "Vectors not specified for this Stellaris chip"
#endif