/****************************************************************************
* arch/avr/src/at90usb/at90usb_serial.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include "at90usb_config.h"
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <unistd.h>
#include <semaphore.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/serial.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "os_internal.h"
#include "at90usb_internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* Some sanity checks *******************************************************/
/* Is there at least one USART enabled and configured as a RS-232 device? */
#ifndef HAVE_USART_DEVICE
# warning "No USARTs enabled as RS-232 devices"
#endif
/* If we are not using the serial driver for the console, then we still must
* provide some minimal implementation of up_putc.
*/
#ifdef CONFIG_USE_SERIALDRIVER
#if defined(CONFIG_USART1_SERIAL_CONSOLE)
# define CONSOLE_DEV g_usart1port /* USART1 is console */
#endif
#define TTYS0_DEV g_usart1port /* USART1 is ttyS0 */
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int usart1_setup(struct uart_dev_s *dev);
static void usart1_shutdown(struct uart_dev_s *dev);
static int usart1_attach(struct uart_dev_s *dev);
static void usart1_detach(struct uart_dev_s *dev);
static int usart1_interrupt(int irq, void *context);
static int usart1_ioctl(struct file *filep, int cmd, unsigned long arg);
static int usart1_receive(struct uart_dev_s *dev, uint32_t *status);
static void usart1_rxint(struct uart_dev_s *dev, bool enable);
static bool usart1_rxavailable(struct uart_dev_s *dev);
static void usart1_send(struct uart_dev_s *dev, int ch);
static void usart1_txint(struct uart_dev_s *dev, bool enable);
static bool usart1_txready(struct uart_dev_s *dev);
/****************************************************************************
* Private Variables
****************************************************************************/
struct uart_ops_s g_uart1_ops =
{
.setup = usart1_setup,
.shutdown = usart1_shutdown,
.attach = usart1_attach,
.detach = usart1_detach,
.ioctl = usart1_ioctl,
.receive = usart1_receive,
.rxint = usart1_rxint,
.rxavailable = usart1_rxavailable,
.send = usart1_send,
.txint = usart1_txint,
.txready = usart1_txready,
.txempty = usart1_txready,
};
/* I/O buffers */
static char g_usart1rxbuffer[CONFIG_USART1_RXBUFSIZE];
static char g_usart1txbuffer[CONFIG_USART1_TXBUFSIZE];
/* This describes the state of the AT90USB USART1 port. */
#ifdef CONFIG_AVR_USART1_RS232
static uart_dev_t g_usart1port =
{
.recv =
{
.size = CONFIG_USART1_RXBUFSIZE,
.buffer = g_usart1rxbuffer,
},
.xmit =
{
.size = CONFIG_USART1_TXBUFSIZE,
.buffer = g_usart1txbuffer,
},
.ops = &g_uart1_ops,
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: usart1_restoreusartint
****************************************************************************/
static void usart1_restoreusartint(uint8_t imr)
{
# warning "Missing logic"
}
/****************************************************************************
* Name: usart1_disableusartint
****************************************************************************/
static inline void usart1_disableusartint(uint8_t *imr)
{
# warning "Missing logic"
}
/****************************************************************************
* Name: usart1_setup
*
* Description:
* Configure the USART baud, bits, parity, etc. This method is called the
* first time that the serial port is opened.
*
****************************************************************************/
static int usart1_setup(struct uart_dev_s *dev)
{
#ifndef CONFIG_SUPPRESS_UART_CONFIG
/* Configure the USART1 */
usart1_configure();
#endif
return OK;
}
/****************************************************************************
* Name: usart1_shutdown
*
* Description:
* Disable the USART. This method is called when the serial
* port is closed
*
****************************************************************************/
static void usart1_shutdown(struct uart_dev_s *dev)
{
/* Reset, disable interrupts, and disable Rx and Tx */
usart1_reset();
}
/****************************************************************************
* Name: usart1_attach
*
* Description:
* Configure the USART to operation in interrupt driven mode. This method is
* called when the serial port is opened. Normally, this is just after the
* the setup() method is called, however, the serial console may operate in
* a non-interrupt driven mode during the boot phase.
*
* RX and TX interrupts are not enabled when by the attach method (unless the
* hardware supports multiple levels of interrupt enabling). The RX and TX
* interrupts are not enabled until the txint() and rxint() methods are called.
*
****************************************************************************/
static int usart1_attach(struct uart_dev_s *dev)
{
/* Attach the USART1 IRQs */
return irq_attach(AT90USB_IRQ_U1RX, usart1_interrupt);
return irq_attach(AT90USB_IRQ_U1DRE, usart1_interrupt);
return irq_attach(AT90USB_IRQ_U1TX, usart1_interrupt);
}
/****************************************************************************
* Name: usart1_detach
*
* Description:
* Detach USART interrupts. This method is called when the serial port is
* closed normally just before the shutdown method is called. The exception
* is the serial console which is never shutdown.
*
****************************************************************************/
static void usart1_detach(struct uart_dev_s *dev)
{
/* Disable USART1 interrupts */
# warning "Missing logic"
/* Detach USART1 interrupts */
return irq_deattach(AT90USB_IRQ_U1RX);
return irq_deattach(AT90USB_IRQ_U1DRE);
return irq_deattach(AT90USB_IRQ_U1TX);
}
/****************************************************************************
* Name: usart1_interrupt
*
* Description:
* This is the USART interrupt handler. It will be invoked when an
* interrupt received on the 'irq' It should call uart_transmitchars or
* uart_receivechar to perform the appropriate data transfers. The
* interrupt handling logic must be able to map the 'irq' number into the
* approprite uart_dev_s structure in order to call these functions.
*
****************************************************************************/
static int usart1_interrupt(int irq, void *context)
{
uint8_t csr;
int passes;
bool handled;
/* Loop until there are no characters to be transferred or,
* until we have been looping for a long time.
*/
handled = true;
for (passes = 0; passes < 256 && handled; passes++)
{
handled = false;
# warning "Missing logic"
/* Handle incoming, receive bytes (with or without timeout) */
# warning "Missing logic"
{
/* Received data ready... process incoming bytes */
uart_recvchars(dev);
handled = true;
}
/* Handle outgoing, transmit bytes */
# warning "Missing logic"
{
/* Transmit data regiser empty ... process outgoing bytes */
uart_xmitchars(dev);
handled = true;
}
}
return OK;
}
/****************************************************************************
* Name: usart1_ioctl
*
* Description:
* All ioctl calls will be routed through this method
*
****************************************************************************/
static int usart1_ioctl(struct file *filep, int cmd, unsigned long arg)
{
#if 0 /* Reserved for future growth */
int ret = OK;
switch (cmd)
{
case xxx: /* Add commands here */
break;
default:
ret = -ENOTTY;
break;
}
return ret;
#else
return -ENOTTY;
#endif
}
/****************************************************************************
* Name: usart1_receive
*
* Description:
* Called (usually) from the interrupt level to receive one
* character from the USART. Error bits associated with the
* receipt are provided in the return 'status'.
*
****************************************************************************/
static int usart1_receive(struct uart_dev_s *dev, uint32_t *status)
{
/* Get the Rx byte. The USART Rx interrupt flag is cleared by side effect
* when reading the received character.
*/
# warning "Missing logic"
/* Return status information */
if (status)
{
# warning "Missing logic"
}
/* Then return the actual received byte */
# warning "Missing logic"
return 0;
}
/****************************************************************************
* Name: usart1_rxint
*
* Description:
* Call to enable or disable RX interrupts
*
****************************************************************************/
static void usart1_rxint(struct uart_dev_s *dev, bool enable)
{
if (enable)
{
/* Receive an interrupt when their is anything in the Rx data register (or an Rx
* timeout occurs).
*/
#ifndef CONFIG_SUPPRESS_SERIAL_INTS
# warning "Missing logic"
#endif
}
else
{
# warning "Missing logic"
}
}
/****************************************************************************
* Name: usart1_rxavailable
*
* Description:
* Return true if the receive register is not empty
*
****************************************************************************/
static bool usart1_rxavailable(struct uart_dev_s *dev)
{
# warning "Missing logic"
return 0;
}
/****************************************************************************
* Name: usart1_send
*
* Description:
* This method will send one byte on the USART.
*
****************************************************************************/
static void usart1_send(struct uart_dev_s *dev, int ch)
{
# warning "Missing logic"
return 0;
}
/****************************************************************************
* Name: usart1_txint
*
* Description:
* Call to enable or disable TX interrupts
*
****************************************************************************/
static void usart1_txint(struct uart_dev_s *dev, bool enable)
{
irqstate_t flags;
flags = irqsave();
if (enable)
{
/* Set to receive an interrupt when the TX data register is empty */
#ifndef CONFIG_SUPPRESS_SERIAL_INTS
# warning "Missing logic"
/* Fake a TX interrupt here by just calling uart_xmitchars() with
* interrupts disabled (note this may recurse).
*/
uart_xmitchars(dev);
#endif
}
else
{
/* Disable the TX interrupt */
# warning "Missing logic"
}
irqrestore(flags);
}
/****************************************************************************
* Name: usart1_txready
*
* Description:
* Return true if the tranmsit data register is empty
*
****************************************************************************/
static bool usart1_txready(struct uart_dev_s *dev)
{
# warning "Missing logic"
return 0;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_earlyserialinit
*
* Description:
* Performs the low level USART initialization early in debug so that the
* serial console will be available during bootup. This must be called
* before up_serialinit.
*
****************************************************************************/
void up_earlyserialinit(void)
{
/* Disable all USARTS */
up_disableusartint(NULL);
/* Configuration whichever one is the console */
#ifdef HAVE_SERIAL_CONSOLE
CONSOLE_DEV.isconsole = true;
usart1_setup(&CONSOLE_DEV);
#endif
}
/****************************************************************************
* Name: up_serialinit
*
* Description:
* Register serial console and serial ports. This assumes
* that up_earlyserialinit was called previously.
*
****************************************************************************/
void up_serialinit(void)
{
/* Register the console */
#ifdef HAVE_SERIAL_CONSOLE
(void)uart_register("/dev/console", &CONSOLE_DEV);
#endif
/* Register all USARTs */
(void)uart_register("/dev/ttyS0", &TTYS0_DEV);
#ifdef TTYS1_DEV
(void)uart_register("/dev/ttyS1", &TTYS1_DEV);
#endif
}
/****************************************************************************
* Name: up_putc
*
* Description:
* Provide priority, low-level access to support OS debug writes
*
****************************************************************************/
int up_putc(int ch)
{
#ifdef HAVE_SERIAL_CONSOLE
uint8_t imr;
up_disableusartint(priv, &imr);
/* Check for LF */
if (ch == '\n')
{
/* Add CR */
up_lowputc('\r');
}
up_lowputc(ch);
up_restoreusartint(priv, imr);
#endif
return ch;
}
#else /* CONFIG_USE_SERIALDRIVER */
/****************************************************************************
* Name: up_putc
*
* Description:
* Provide priority, low-level access to support OS debug writes
*
****************************************************************************/
int up_putc(int ch)
{
#ifdef HAVE_SERIAL_CONSOLE
/* Check for LF */
if (ch == '\n')
{
/* Add CR */
up_lowputc('\r');
}
up_lowputc(ch);
#endif
return ch;
}
#endif /* CONFIG_USE_SERIALDRIVER */
