|
|
/************************************************************************************
* arch/hc/include/m9s12/irq.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/* This file should never be included directed but, rather,
* only indirectly through nuttx/irq.h
*/
#ifndef __ARCH_HC_INCLUDE_M9S12_IRQ_H
#define __ARCH_HC_INCLUDE_M9S12_IRQ_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/irq.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* IRQ Numbers */
#define HCS12_IRQ_VRESET 0 /* fffe: External reset, power on reset orlow voltage reset */
#define HCS12_IRQ_VCLKMON 1 /* fffc: Clock monitor fail reset */
#define HCS12_IRQ_VCOP 2 /* fffa: COP failure reset*/
#define HCS12_IRQ_VTRAP 3 /* fff8: Unimplemented instruction trap */
#define HCS12_IRQ_VSWI 4 /* fff6: SWI */
#define HCS12_IRQ_VXIRQ 5 /* fff4: XIRQ */
#define HCS12_IRQ_VIRQ 6 /* fff2: IRQ */
#define HCS12_IRQ_VRTI 7 /* fff0: Real-time interrupt */
/* ffe8-ffef: Reserved */
#define HCS12_IRQ_VTIMCH4 8 /* ffe6: Standard timer channel 4 */
#define HCS12_IRQ_VTIMCH5 9 /* ffe4: Standard timer channel 5 */
#define HCS12_IRQ_VTIMCH6 10 /* ffe2: Standard timer channel 6 */
#define HCS12_IRQ_VTIMCH7 11 /* ffe0: Standard timer channel 7 */
#define HCS12_IRQ_VTIMOVF 12 /* ffde: Standard timer overflow */
#define HCS12_IRQ_VTIMPAOVF 13 /* ffdc: Pulse accumulator overflow */
#define HCS12_IRQ_VTIMPAIE 14 /* ffda: Pulse accumulator input edge */
#define HCS12_IRQ_VSPI 15 /* ffd8: SPI */
#define HCS12_IRQ_VSCI0 16 /* ffd6: SCI0 */
#define HCS12_IRQ_VSCI1 17 /* ffd4: SCI1 */
#define HCS12_IRQ_VATD 18 /* ffd2: ATD */
/* ffd0: Reserved */
#define HCS12_IRQ_VPORTJ 19 /* ffce: Port J */
#define HCS12_IRQ_VPORTH 20 /* ffcc: Port H */
#define HCS12_IRQ_VPORTG 21 /* ffca: Port G */
/* ffc8: Reserved */
#define HCS12_IRQ_VCRGPLLLCK 22 /* ffc6: CRG PLL lock */
#define HCS12_IRQ_VCRGSCM 23 /* ffc4: CRG self clock mode */
/* ffc2: Reserved */
#define HCS12_IRQ_VIIC 24 /* ffc0: IIC bus */
/* ffba-ffbf: Reserved */
#define HCS12_IRQ_VFLASH 25 /* ffb8: FLASH */
#define HCS12_IRQ_VEPHY 26 /* ffb6: EPHY interrupt */
#define HCS12_IRQ_VEMACCRXBAC 27 /* ffb4: EMAC receive buffer A complete */
#define HCS12_IRQ_VEMACCRXBBC 28 /* ffb2: EMAC receive buffer B complete */
#define HCS12_IRQ_VEMACTXC 29 /* ffb0: EMAC frame transmission complete */
#define HCS12_IRQ_VEMACRXFC 30 /* ffae: EMAC receive flow control */
#define HCS12_IRQ_VEMACMII 31 /* ffac: EMAC MII management transfer complete */
#define HCS12_IRQ_VEMACRXERR 32 /* ffaa: EMAC receive error */
#define HCS12_IRQ_VEMACRXBAO 33 /* ffa8: EMAC receive buffer A overrun */
#define HCS12_IRQ_VEMACRXBBO 34 /* ffa6: EMAC receive buffer B overrun */
#define HCS12_IRQ_VEMACBRXERR 35 /* ffa4: EMAC babbling receive error */
#define HCS12_IRQ_VEMACLC 36 /* ffa2: EMAC late collision */
#define HCS12_IRQ_VEMACEC 37 /* ffa0: EMAC excessive collision */
/* ff80-ff9f: Reserved */
#define HCS12_IRQ_NVECTORS 38
/* GPIO interrupts. The m9s12x supports several interrupts on PIM ports G, H,
* and J. We go through some special efforts to keep the number of IRQs
* to a minimum in this sparse interrupt case.
*
* Port G: Pins 0-7
* Port H: Pins 0-6
* Port J: Pins 0-3 and 6-7
*/
#ifdef CONFIG_GPIO_IRQ
/* To conserve space, interrupts must also be configured, port by port */
# define HCC12_IRQ_PGFIRST HCS12_IRQ_NVECTORS
# ifdef CONFIG_HCS12_PORTG_INTS
# define HCS12_IRQ_PGSET 0xff
# define HCS12_IRQ_PG0 (HCC12_IRQ_PGFIRST+0)
# define HCS12_IRQ_PG1 (HCC12_IRQ_PGFIRST+1)
# define HCS12_IRQ_PG2 (HCC12_IRQ_PGFIRST+2)
# define HCS12_IRQ_PG3 (HCC12_IRQ_PGFIRST+3)
# define HCS12_IRQ_PG4 (HCC12_IRQ_PGFIRST+4)
# define HCS12_IRQ_PG5 (HCC12_IRQ_PGFIRST+5)
# define HCS12_IRQ_PG6 (HCC12_IRQ_PGFIRST+6)
# define HCS12_IRQ_PG7 (HCC12_IRQ_PGFIRST+7)
# define HCC12_IRQ_PHFIRST (HCC12_IRQ_PGFIRST+8)
# else
# define HCC12_IRQ_PHFIRST HCC12_IRQ_PGFIRST
# endif
# ifdef CONFIG_HCS12_PORTH_INTS
# define HCS12_IRQ_PHSET 0x7f
# define HCS12_IRQ_PH0 (HCC12_IRQ_PHFIRST+0)
# define HCS12_IRQ_PH1 (HCC12_IRQ_PHFIRST+1)
# define HCS12_IRQ_PH2 (HCC12_IRQ_PHFIRST+2)
# define HCS12_IRQ_PH3 (HCC12_IRQ_PHFIRST+3)
# define HCS12_IRQ_PH4 (HCC12_IRQ_PHFIRST+4)
# define HCS12_IRQ_PH5 (HCC12_IRQ_PHFIRST+5)
# define HCS12_IRQ_PH6 (HCC12_IRQ_PHFIRST+6)
# define HCC12_IRQ_PJFIRST (HCC12_IRQ_PHFIRST+7)
# else
# define HCC12_IRQ_PJFIRST HCC12_IRQ_PHFIRST
# endif
# ifdef CONFIG_HCS12_PORTJ_INTS
# define HCS12_IRQ_PJSET 0xcf
# define HCS12_IRQ_PJ0 (HCC12_IRQ_PJFIRST+0)
# define HCS12_IRQ_PJ1 (HCC12_IRQ_PJFIRST+1)
# define HCS12_IRQ_PJ2 (HCC12_IRQ_PJFIRST+2)
# define HCS12_IRQ_PJ3 (HCC12_IRQ_PJFIRST+3)
# define HCS12_IRQ_PJ6 (HCC12_IRQ_PJFIRST+4)
# define HCS12_IRQ_PJ7 (HCC12_IRQ_PJFIRST+5)
# define HCS12_IRQ_NIRQS (HCC12_IRQ_PJFIRST+6)
# else
# define HCS12_IRQ_NIRQS HCC12_IRQ_PJFIRST
# endif
#else
# define HCS12_IRQ_NIRQS HCS12_IRQ_NVECTORS
#endif /* CONFIG_GPIO_IRQ */
#define HCS12_IRQ_VILLEGAL HCS12_IRQ_NIRQS /* Any reserved vector */
#define NR_IRQS (HCS12_IRQ_NIRQS+1)
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif
#endif /* __ARCH_HC_INCLUDE_M9S12_IRQ_H */
|
