|
|
/************************************************************************************
* arch/hc/src/m9s12/m9s12_sci.h (v3)
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_HC_SRC_M9S12_M9S12_SCI_H
#define __ARCH_ARM_HC_SRC_M9S12_M9S12_SCI_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define HCS12_SCI_BDH_OFFSET 0x00 /* SCI Baud Rate Register High */
#define HCS12_SCI_BDL_OFFSET 0x01 /* SCI Baud Rate Register Low */
#define HCS12_SCI_CR1_OFFSET 0x02 /* SCI Control Register 1 */
#define HCS12_SCI_CR2_OFFSET 0x03 /* SCI Control Register 2 */
#define HCS12_SCI_SR1_OFFSET 0x04 /* SCI Status Register 1 */
#define HCS12_SCI_SR2_OFFSET 0x05 /* SCI Status Register 2 */
#define HCS12_SCI_DRH_OFFSET 0x06 /* SCI Data Register High */
#define HCS12_SCI_DRL_OFFSET 0x07 /* SCI Data Register Low */
/* Register Addresses ***************************************************************/
#define HCS12_SCI0_BDH (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_BDH_OFFSET)
#define HCS12_SCI0_BDL (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_BDL_OFFSET)
#define HCS12_SCI0_CR1 (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_CR1_OFFSET)
#define HCS12_SCI0_CR2 (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_CR2_OFFSET)
#define HCS12_SCI0_SR1 (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_SR1_OFFSET)
#define HCS12_SCI0_SR2 (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_SR2_OFFSET)
#define HCS12_SCI0_DRH (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_DRH_OFFSET)
#define HCS12_SCI0_DRL (HCS12_REG_BASE+HCS12_SCI0_BASE+HCS12_SCI_DRL_OFFSET)
#define HCS12_SCI1_BDH (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_BDH_OFFSET)
#define HCS12_SCI1_BDL (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_BDL_OFFSET)
#define HCS12_SCI1_CR1 (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_CR1_OFFSET)
#define HCS12_SCI1_CR2 (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_CR2_OFFSET)
#define HCS12_SCI1_SR1 (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_SR1_OFFSET)
#define HCS12_SCI1_SR2 (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_SR2_OFFSET)
#define HCS12_SCI1_DRH (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_DRH_OFFSET)
#define HCS12_SCI1_DRL (HCS12_REG_BASE+HCS12_SCI1_BASE+HCS12_SCI_DRL_OFFSET)
/* Register Bit-Field Definitions ***************************************************/
/* SCI Baud Rate Register High Bit-Field Definitions */
#define SCI_BDH_SBR_SHIFT (0) /* Bits 0-4: SBR[11:8] */
#define SCI_BDH_SBR_MASK (0x1f << SCI_BDH_SBR_SHIFT)
#define SCI_BDH_TNP_SHIFT (5) /* Bits 5-6: IRSCI Transmit Pulse Width */
#define SCI_BDH_TNP_MASK (3 << SCI_BDH_TNP_SHIFT)
# define SCI_BDH_TNP_132 (0 << SCI_BDH_TNP_SHIFT) /* 1/32 */
# define SCI_BDH_TNP_116 (1 << SCI_BDH_TNP_SHIFT) /* 1/16 */
# define SCI_BDH_TNP_316 (2 << SCI_BDH_TNP_SHIFT) /* 3/16 */
#define SCI_BDH_IREN (1 << 7) /* Bit 7: Infrared Enable */
/* SCI Baud Rate Register Low Bit-Field Definitions */
/* This register holds the low 7 bits of the baud bits SBR[7:0] */
/* SCI Control Register 1 Bit-Field Definitions */
#define SCI_CR1_PT (1 << 0) /* Bit 0: Parity Type */
#define SCI_CR1_PE (1 << 1) /* Bit 1: Parity Enable */
#define SCI_CR1_ILT (1 << 2) /* Bit 2: Idle Line Type */
#define SCI_CR1_WAKE (1 << 3) /* Bit 3: Wakeup Condition */
#define SCI_CR1_M (1 << 4) /* Bit 4: Data Format Mode */
#define SCI_CR1_RSRC (1 << 5) /* Bit 5: Receiver Source */
#define SCI_CR1_SCISWAI (1 << 6) /* Bit 6: SCI Stop in Wait Mode */
#define SCI_CR1_LOOPS (1 << 7) /* Bit 7: Enables loop operation */
/* SCI Control Register 2 Bit-Field Definitions */
#define SCI_CR2_SBK (1 << 0) /* Bit 0: Send Break */
#define SCI_CR2_RWU (1 << 1) /* Bit 1: Receiver Wakeup */
#define SCI_CR2_RE (1 << 2) /* Bit 2: Receiver Enable */
#define SCI_CR2_TE (1 << 3) /* Bit 3: Transmitter Enable */
#define SCI_CR2_ILIE (1 << 4) /* Bit 4: Idle Line Interrupt Enable */
#define SCI_CR2_RIE (1 << 5) /* Bit 5: Receiver Full Interrupt Enable Bit */
#define SCI_CR2_TCIE (1 << 6) /* Bit 6: Transmission Complete Interrupt Enable */
#define SCI_CR2_TIE (1 << 7) /* Bit 7: Transmitter Interrupt Enable */
#define SCI_CR2_ALLINTS 0xf0
/* SCI Status Register 1 Bit-Field Definitions */
#define SCI_SR1_PF (1 << 0) /* Bit 0: Parity Error */
#define SCI_SR1_FE (1 << 1) /* Bit 1: Framing Error */
#define SCI_SR1_NF (1 << 2) /* Bit 2: Noise */
#define SCI_SR1_OR (1 << 3) /* Bit 3: Overrun */
#define SCI_SR1_IDLE (1 << 4) /* Bit 4: Idle Line */
#define SCI_SR1_RDRF (1 << 5) /* Bit 5: Receive Data Register Full */
#define SCI_SR1_TC (1 << 6) /* Bit 6: Transmit Complete */
#define SCI_SR1_TDRE (1 << 7) /* Bit 7: Transmit Data Register Empty */
/* SCI Status Register 2 Bit-Field Definitions */
#define SCI_SR2_BRK13 (1 << 2) /* Bit 2: Break Transmit Character Length */
#define SCI_SR2_TXDIR (1 << 1) /* Bit 1: Transmitter Pin Data Direction in Single-Wire */
#define SCI_SR2_RAF (1 << 0) /* Bit 0: Receiver Active */
/* SCI Data Register High Bit-Field Definitions */
#define SCI_DRH_T8 (1 << 6) /* Bit 6: Transmit Bit 8 */
#define SCI_DRH_R8 (1 << 7) /* Bit 7: Received Bit 8 */
/* SCI Data Register Low Bit-Field Definitions */
/* Receive/Transmit bits 0-7 */
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_HC_SRC_M9S12_M9S12_SCI_H */
|
