|
|
/************************************************************************************
* arch/z80/src/ez80/ez80f91_spi.h
* arch/z80/src/chip/ez80f91_spi.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_Z80_SRC_EZ80_EZ80F91_SPI_H
#define __ARCH_Z80_SRC_EZ80_EZ80F91_SPI_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/spi/spi.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* SPIC Registers *****************************************************************/
/* Provided in ez80f91.h */
/* SPIC Register Bit Definitions **************************************************/
/* Baud Rate Generator (BRG) H/L Register Definitions
*
* No bit definitions -- These two 8-bit registers set the 16-bit BRG divider value
*/
/* SPI Control (CTL} Register Definitions */
#define SPI_CTL_IRQEN (1 << 7) /* Bit 7: 1=SPI system interrupt is enabled */
#define SPI_CTL_SPIEN (1 << 5) /* Bit 5: 1=SPI is enabled */
#define SPI_CTL_MASTEREN (1 << 4) /* Bit 4: 1=SPI operates as a master */
#define SPI_CTL_CPOL (1 << 3) /* Bit 3: 1=Master SCK pin idles in a high (1) state */
#define SPI_CTL_CPHA (1 << 2) /* Bit 2: 1=SS remains Low to transfer any number of data bytes */
/* SR Register Definitions */
#define SPI_SR_SPIF (1 << 7) /* Bit x: 1=SPI data transfer is finished */
#define SPI_SR_WCOL (1 << 6) /* Bit x: 1=SPI write collision is detected*/
#define SPI_SR_MODF (1 << 4) /* Bit x: 1=Mode fault (multimaster conflict) is detected */
/* RBR/TSR Register Definitions */
/* No definitions: 8-bit SPI receive/transmit data */
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif /* __cplusplus */
/************************************************************************************
* Public Functions
************************************************************************************/
/* The external functions, ez80_spiselect, ez80_spistatus, ans ez80_spicmddata must
* be provided by board-specific logic. These are implementations of the select,
* status, and cmddata methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h). All other methods (including up_spiinitialize()) are
* provided by common logic. To use this common SPI logic on your board:
*
* 1. Provide ez80_spiselect() and ez80_spistatus() functions in your board-specific
* logic. This function will perform chip selection and status operations using
* GPIOs in the way your board is configured.
* 2. If CONFIG_SPI_CMDDATA is defined in your NuttX configuration, provide the
* ez80_spiscmddata() function in your board-specific logic. This function will
* perform cmd/data selection operations using GPIOs in the way your board is
* configured.
* 3. Add a call to up_spiinitialize() in your low level initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling mmcsd_spislotinitialize(),
* for example, will bind the SPI driver to the SPI MMC/SD driver).
*/
EXTERN void ez80_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t ez80_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
EXTERN int ez80_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#undef EXTERN
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_Z80_SRC_EZ80_EZ80F91_SPI_H */
|