/**************************************************************************
* arch/z80/src/z8/z8_xdef.S
* Interrupt Handling
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS or IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER or CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, or CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS or SERVICES; LOSS
* OF USE, DATA, or PROFITS; or BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, or TORT (INCLUDING NEGLIGENCE or OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************
* Included Files
**************************************************************************/
#include <nuttx/config.h>
#include <arch/irq.h>
#include <ez8.inc>
#include <vect.inc>
/**************************************************************************
* Pre-processor Definitions
**************************************************************************/
/**************************************************************************
* External References / External Definitions
**************************************************************************/
xref _up_doirq:ROM
#if defined(ENCORE_VECTORS)
xdef _z8_wdt_handler
xdef _z8_trap_handler
if EZ8_TIMER3=1
xdef _z8_timer2_handler
endif
xdef _z8_timer1_handler
xdef _z8_timer0_handler
if EZ8_UART0=1
xdef _z8_uart0rx_handler
xdef _z8_uart0tx_handler
endif
if EZ8_I2C=1
xdef _z8_i2c_handler
endif
if EZ8_SPI=1
xdef _z8_spi_handler
endif
if EZ8_ADC=1
xdef _z8_adc_handler
endif
xdef _z8_p7ad_handler
xdef _z8_p6ad_handler
xdef _z8_p5ad_handler
xdef _z8_p4ad_handler
xdef _z8_p3ad_handler
xdef _z8_p2ad_handler
xdef _z8_p1ad_handler
xdef _z8_p0ad_handler
if EZ8_TIMER4=1
xdef _z8_timer3_handler
endif
if EZ8_UART1=1
xdef _z8_uart1rx_handler
xdef _z8_uart1tx_handler
endif
if EZ8_DMA=1
xdef _z8_dma_handler
endif
if EZ8_PORT1=0
xdef _z8_c3_handler
xdef _z8_c2_handler
xdef _z8_c1_handler
xdef _z8_c0_handler
endif
/**************************************************************************/
#elif defined(ENCORE_XP_VECTORS)
xdef _z8_wdt_handler
xdef _z8_trap_handler
if EZ8_TIMER3=1
xdef _z8_timer2_handler
endif
xdef _z8_timer1_handler
xdef _z8_timer0_handler
if EZ8_UART0=1
xdef _z8_uart0rx_handler
xdef _z8_uart0tx_handler
endif
if EZ8_I2C=1
xdef _z8_i2c_handler
endif
if EZ8_SPI=1
xdef _z8_spi_handler
endif
if (EZ8_ADC=1) || (EZ8_ADC_NEW=1)
xdef _z8_adc_handler
endif
xdef _z8_p7ad_handler
xdef _z8_p6ad_handler
xdef _z8_p5ad_handler
xdef _z8_p4ad_handler
xdef _z8_p3ad_handler
xdef _z8_p2ad_handler
xdef _z8_p1ad_handler
xdef _z8_p0ad_handler
if EZ8_TIMER4=1
xdef _z8_timer3_handler
endif
if EZ8_UART1=1
xdef _z8_uart1rx_handler
xdef _z8_uart1tx_handler
endif
if EZ8_DMA=1
xdef _z8_dma_handler
endif
if (EZ8_PORT1=0)
xdef _z8_c3_handler
xdef _z8_c2_handler
xdef _z8_c1_handler
xdef _z8_c0_handler
endif
xdef _z8_potrap_handler
xdef _z8_wotrap_handler
/**************************************************************************/
#elif defined(ENCORE_XP16K_VECTORS)
xdef _z8_wdt_handler
xdef _z8_trap_handler
if EZ8_TIMER3=1
xdef _z8_timer2_handler
endif
xdef _z8_timer1_handler
xdef _z8_timer0_handler
if EZ8_UART0=1
xdef _z8_uart0rx_handler
xdef _z8_uart0tx_handler
endif
if EZ8_I2C=1
xdef _z8_i2c_handler
endif
if EZ8_ESPI=1
xdef _z8_spi_handler
endif
if EZ8_ADC_NEW=1
xdef _z8_adc_handler
endif
xdef _z8_p7ad_handler
xdef _z8_p6ad_handler
xdef _z8_p5ad_handler
xdef _z8_p4ad_handler
xdef _z8_p3ad_handler
xdef _z8_p2ad_handler
xdef _z8_p1ad_handler
xdef _z8_p0ad_handler
if EZ8_MCT=1
xdef _z8_mct_handler
endif
if EZ8_UART1=1
xdef _z8_uart1rx_handler
xdef _z8_uart1tx_handler
endif
xdef _z8_c3_handler
xdef _z8_c2_handler
xdef _z8_c1_handler
xdef _z8_c0_handler
xdef _z8_potrap_handler
xdef _z8_wotrap_handler
/**************************************************************************/
#elif defined(ENCORE_MC_VECTORS)
xdef _z8_wdt_handler
xdef _z8_trap_handler
xdef _z8_pwmtimer_handler
xdef _z8_pwmfault_handler
if EZ8_ADC_NEW=1
xdef _z8_adc_handler
endif
xdef _z8_cmp_handler
xdef _z8_timer0_handler
if EZ8_UART0
xdef _z8_uart0rx_handler
xdef _z8_uart0tx_handler
endif
if EZ8_SPI=1
xdef _z8_spi_handler
endif
if EZ8_I2C=1
xdef _z8_i2c_handler
endif
xdef _z8_c0_handler
xdef _z8_pb_handler
xdef _z8_p7ap3a_handler
xdef _z8_p6ap2a_handler
xdef _z8_p5ap1a_handler
xdef _z8_p4ap0a_handler
xdef _z8_potrap_handler
xdef _z8_wotrap_handler
#endif
/**************************************************************************
* Macros
**************************************************************************/
ENTER : MACRO val
pushx rp /* Save the current RP value in the stack */
srp #%f0 /* Load the interrupt register pointer */
ld r0, #val /* Pass the new value in r0 */
jr _z8_common_handler /* The rest of the handling is common */
ENDMAC ENTER
LEAVE : MACRO
popx rp /* Restore the user register pointer */
iret /* And return from interrupt */
ENDMAC LEAVE
/**************************************************************************
* Code
**************************************************************************/
segment CODE
/**************************************************************************
* Interrupt Vectors
**************************************************************************/
#if defined(ENCORE_VECTORS)
vector WDT = _z8_wdt_handler
vector TRAP = _z8_trap_handler
if EZ8_TIMER3=1
vector TIMER2 = _z8_timer2_handler
endif
vector TIMER1 = _z8_timer1_handler
vector TIMER0 = _z8_timer0_handler
if EZ8_UART0=1
vector UART0_RX = _z8_uart0rx_handler
vector UART0_TX = _z8_uart0tx_handler
endif
if EZ8_I2C=1
vector I2C = _z8_i2c_handler
endif
if EZ8_SPI=1
vector SPI = _z8_spi_handler
endif
if EZ8_ADC=1
vector ADC = _z8_adc_handler
endif
vector P7AD = _z8_p7ad_handler
vector P6AD = _z8_p6ad_handler
vector P5AD = _z8_p5ad_handler
vector P4AD = _z8_p4ad_handler
vector P3AD = _z8_p3ad_handler
vector P2AD = _z8_p2ad_handler
vector P1AD = _z8_p1ad_handler
vector P0AD = _z8_p0ad_handler
if EZ8_TIMER4=1
vector TIMER3 = _z8_timer3_handler
endif
if EZ8_UART1=1
vector UART1_RX = _z8_uart1rx_handler
vector UART1_TX = _z8_uart1tx_handler
endif
if EZ8_DMA=1
vector DMA = _z8_dma_handler
endif
if EZ8_PORT1=0
vector C3 = _z8_c3_handler
vector C2 = _z8_c2_handler
vector C1 = _z8_c1_handler
vector C0 = _z8_c0_handler
endif
/**************************************************************************/
#elif defined(ENCORE_XP_VECTORS)
vector WDT = _z8_wdt_handler
vector TRAP = _z8_trap_handler
if EZ8_TIMER3=1
vector TIMER2 = _z8_timer2_handler
endif
vector TIMER1 = _z8_timer1_handler
vector TIMER0 = _z8_timer0_handler
if EZ8_UART0=1
vector UART0_RX = _z8_uart0rx_handler
vector UART0_TX = _z8_uart0tx_handler
endif
if EZ8_I2C=1
vector I2C = _z8_i2c_handler
endif
if EZ8_SPI=1
vector SPI = _z8_spi_handler
endif
if (EZ8_ADC=1) || (EZ8_ADC_NEW=1)
vector ADC = _z8_adc_handler
endif
vector P7AD = _z8_p7ad_handler
vector P6AD = _z8_p6ad_handler
vector P5AD = _z8_p5ad_handler
vector P4AD = _z8_p4ad_handler
vector P3AD = _z8_p3ad_handler
vector P2AD = _z8_p2ad_handler
vector P1AD = _z8_p1ad_handler
vector P0AD = _z8_p0ad_handler
if EZ8_TIMER4=1
vector TIMER3 = _z8_timer3_handler
endif
if EZ8_UART1=1
vector UART1_RX = _z8_uart1rx_handler
vector UART1_TX = _z8_uart1tx_handler
endif
if EZ8_DMA=1
vector DMA = _z8_dma_handler
endif
if EZ8_PORT1=0
vector C3 = _z8_c3_handler
vector C2 = _z8_c2_handler
vector C1 = _z8_c1_handler
vector C0 = _z8_c0_handler
endif
vector POTRAP = _z8_potrap_handler
vector WOTRAP = _z8_wotrap_handler
/**************************************************************************/
#elif defined(ENCORE_XP16K_VECTORS)
vector WDT = _z8_wdt_handler
vector TRAP = _z8_trap_handler
if EZ8_TIMER3=1
vector TIMER2 = _z8_timer2_handler
endif
vector TIMER1 = _z8_timer1_handler
vector TIMER0 = _z8_timer0_handler
if EZ8_UART0=1
vector UART0_RX = _z8_uart0rx_handler
vector UART0_TX = _z8_uart0tx_handler
endif
if EZ8_I2C=1
vector I2C = _z8_i2c_handler
endif
if EZ8_ESPI=1
vector SPI = _z8_spi_handler
endif
if EZ8_ADC_NEW=1
vector ADC = _z8_adc_handler
endif
vector P7AD = _z8_p7ad_handler
vector P6AD = _z8_p6ad_handler
vector P5AD = _z8_p5ad_handler
vector P4AD = _z8_p4ad_handler
vector P3AD = _z8_p3ad_handler
vector P2AD = _z8_p2ad_handler
vector P1AD = _z8_p1ad_handler
vector P0AD = _z8_p0ad_handler
if EZ8_MCT=1
vector MCT = _z8_mct_handler
endif
if EZ8_UART1=1
vector UART1_RX = _z8_uart1rx_handler
vector UART1_TX = _z8_uart1tx_handler
endif
vector C3 = _z8_c3_handler
vector C2 = _z8_c2_handler
vector C1 = _z8_c1_handler
vector C0 = _z8_c0_handler
vector POTRAP = _z8_potrap_handler
vector WOTRAP = _z8_wotrap_handler
/**************************************************************************/
#elif defined(ENCORE_MC_VECTORS)
vector WDT = _z8_wdt_handler
vector TRAP = _z8_trap_handler
vector PWMTIMER = _z8_pwmtimer_handler
vector PWMFAULT = _z8_pwmfault_handler
if EZ8_ADC_NEW=1
vector ADC = _z8_adc_handler
endif
vector CMP = _z8_cmp_handler
vector TIMER0 = _z8_timer0_handler
if EZ8_UART0
vector UART0_RX = _z8_uart0rx_handler
vector UART0_TX = _z8_uart0tx_handler
endif
if EZ8_SPI=1
vector SPI = _z8_spi_handler
endif
if EZ8_I2C=1
vector I2C = _z8_i2c_handler
endif
vector C0 = _z8_c0_handler
vector PB = _z8_pb_handler
vector P7A = _z8_p7ap3a_handler
vector P6A = _z8_p6ap2a_handler
vector P5A = _z8_p5ap1a_handler
vector P4A = _z8_p4ap0a_handler
vector POTRAP = _z8_potrap_handler
vector WOTRAP = _z8_wotrap_handler
#endif
/**************************************************************************
* Name: _z16f_*_handler
*
* Description:
* Map individual interrupts into interrupt number and branch to common
* interrupt handling logic. If higher interrupt handling performance
* for particular interrupts is required, then those interrupts should
* be picked off here and handled outside of the common logic.
*
* On entry to any of these handlers, the stack contains the following:
*
* TOS before interrupt
* PC[7:0]
* PC[15:8]
* SP -> Flags Register
*
**************************************************************************/
#if defined(ENCORE_VECTORS)
_z8_wdt_handler:
ENTER(Z8_WDT_IRQ)
_z8_trap_handler:
ENTER(Z8_TRAP_IRQ)
if EZ8_TIMER3=1
_z8_timer2_handler:
ENTER(Z8_TIMER2_IRQ)
endif
_z8_timer1_handler:
ENTER(Z8_TIMER1_IRQ)
_z8_timer0_handler:
ENTER(Z8_TIMER0_IRQ)
if EZ8_UART0=1
_z8_uart0rx_handler:
ENTER(Z8_UART0_RX_IRQ)
_z8_uart0tx_handler:
ENTER(Z8_UART0_TX_IRQ)
endif
if EZ8_I2C=1
_z8_i2c_handler:
ENTER(Z8_I2C_IRQ)
endif
if EZ8_SPI=1
_z8_spi_handler:
ENTER(Z8_SPI_IRQ)
endif
if EZ8_ADC=1
_z8_adc_handler:
ENTER(Z8_ADC_IRQ)
endif
_z8_p7ad_handler:
ENTER(Z8_P7AD_IRQ)
_z8_p6ad_handler:
ENTER(Z8_P6AD_IRQ)
_z8_p5ad_handler:
ENTER(Z8_P5AD_IRQ)
_z8_p4ad_handler:
ENTER(Z8_P4AD_IRQ)
_z8_p3ad_handler:
ENTER(Z8_P3AD_IRQ)
_z8_p2ad_handler:
ENTER(Z8_P2AD_IRQ)
_z8_p1ad_handler:
ENTER(Z8_P1AD_IRQ)
_z8_p0ad_handler:
ENTER(Z8_P0AD_IRQ)
if EZ8_TIMER4=1
_z8_timer3_handler:
ENTER(Z8_TIMER3_IRQ)
endif
if EZ8_UART1=1
_z8_uart1rx_handler:
ENTER(Z8_UART1_RX_IRQ)
_z8_uart1tx_handler:
ENTER(Z8_UART1_TX_IRQ)
endif
if EZ8_DMA=1
_z8_dma_handler:
ENTER(Z8_DMA_IRQ)
endif
if EZ8_PORT1=0
_z8_c3_handler:
ENTER(Z8_C3_IRQ)
_z8_c2_handler:
ENTER(Z8_C2_IRQ)
_z8_c1_handler:
ENTER(Z8_C1_IRQ)
_z8_c0_handler:
ENTER(Z8_C0_IRQ)
endif
/**************************************************************************/
#elif defined(ENCORE_XP_VECTORS)
_z8_wdt_handler:
ENTER(Z8_WDT_IRQ)
_z8_trap_handler:
ENTER(Z8_TRAP_IRQ)
if EZ8_TIMER3=1
_z8_timer2_handler:
ENTER(Z8_TIMER2_IRQ)
endif
_z8_timer1_handler:
ENTER(Z8_TIMER1_IRQ)
_z8_timer0_handler:
ENTER(Z8_TIMER0_IRQ)
if EZ8_UART0=1
_z8_uart0rx_handler:
ENTER(Z8_UART0_RX_IRQ)
_z8_uart0tx_handler:
ENTER(Z8_UART0_TX_IRQ)
endif
if EZ8_I2C=1
_z8_i2c_handler:
ENTER(Z8_I2C_IRQ)
endif
if EZ8_SPI=1
_z8_spi_handler:
ENTER(Z8_SPI_IRQ)
endif
if (EZ8_ADC=1) || (EZ8_ADC_NEW=1)
_z8_adc_handler:
ENTER(Z8_ADC_IRQ)
endif
_z8_p7ad_handler:
ENTER(Z8_P7AD_IRQ)
_z8_p6ad_handler:
ENTER(Z8_P6AD_IRQ)
_z8_p5ad_handler:
ENTER(Z8_P5AD_IRQ)
_z8_p4ad_handler:
ENTER(Z8_P4AD_IRQ)
_z8_p3ad_handler:
ENTER(Z8_P3AD_IRQ)
_z8_p2ad_handler:
ENTER(Z8_P2AD_IRQ)
_z8_p1ad_handler:
ENTER(Z8_P1AD_IRQ)
_z8_p0ad_handler:
ENTER(Z8_P0AD_IRQ)
if EZ8_TIMER4=1
_z8_timer3_handler:
ENTER(Z8_TIMER3_IRQ)
endif
if EZ8_UART1=1
_z8_uart1rx_handler:
ENTER(Z8_UART1_RX_IRQ)
_z8_uart1tx_handler:
ENTER(Z8_UART1_TX_IRQ)
endif
if EZ8_DMA=1
_z8_dma_handler:
ENTER(Z8_DMA_IRQ)
endif
if EZ8_PORT1=0
_z8_c3_handler:
ENTER(Z8_C3_IRQ)
_z8_c2_handler:
ENTER(Z8_C2_IRQ)
_z8_c1_handler:
ENTER(Z8_C1_IRQ)
_z8_c0_handler:
ENTER(Z8_C0_IRQ)
endif
_z8_potrap_handler:
ENTER(Z8_POTRAP_IRQ)
_z8_wotrap_handler:
ENTER(Z8_WOTRAP_IRQ)
/**************************************************************************/
#elif defined(ENCORE_XP16K_VECTORS)
_z8_wdt_handler:
ENTER(Z8_WDT_IRQ)
_z8_trap_handler:
ENTER(Z8_TRAP_IRQ)
if EZ8_TIMER3=1
_z8_timer2_handler:
ENTER(Z8_TIMER2_IRQ)
endif
_z8_timer1_handler:
ENTER(Z8_TIMER1_IRQ)
_z8_timer0_handler:
ENTER(Z8_TIMER0_IRQ)
if EZ8_UART0=1
_z8_uart0rx_handler:
ENTER(Z8_UART0_RX_IRQ)
_z8_uart0tx_handler:
ENTER(Z8_UART0_TX_IRQ)
endif
if EZ8_I2C=1
_z8_i2c_handler:
ENTER(Z8_I2C_IRQ)
endif
if EZ8_ESPI=1
_z8_spi_handler:
ENTER(Z8_SPI_IRQ)
endif
if EZ8_ADC_NEW=1
_z8_adc_handler:
ENTER(Z8_ADC_IRQ)
endif
_z8_p7ad_handler:
ENTER(Z8_P7AD_IRQ)
_z8_p6ad_handler:
ENTER(Z8_P6AD_IRQ)
_z8_p5ad_handler:
ENTER(Z8_P5AD_IRQ)
_z8_p4ad_handler:
ENTER(Z8_P4AD_IRQ)
_z8_p3ad_handler:
ENTER(Z8_P3AD_IRQ)
_z8_p2ad_handler:
ENTER(Z8_P2AD_IRQ)
_z8_p1ad_handler:
ENTER(Z8_P1AD_IRQ)
_z8_p0ad_handler:
ENTER(Z8_P0AD_IRQ)
if EZ8_MCT=1
_z8_mct_handler:
ENTER(Z8_MCT_IRQ)
endif
if EZ8_UART1=1
_z8_uart1rx_handler:
ENTER(Z8_UART1_RX_IRQ)
_z8_uart1tx_handler:
ENTER(Z8_UART1_TX_IRQ)
endif
_z8_c3_handler:
ENTER(Z8_C3_IRQ)
_z8_c2_handler:
ENTER(Z8_C2_IRQ)
_z8_c1_handler:
ENTER(Z8_C1_IRQ)
_z8_c0_handler:
ENTER(Z8_C0_IRQ)
_z8_potrap_handler:
ENTER(Z8_POTRAP_IRQ)
_z8_wotrap_handler:
ENTER(Z8_WOTRAP_IRQ)
/**************************************************************************/
#elif defined(ENCORE_MC_VECTORS)
_z8_wdt_handler:
ENTER(Z8_WDT_IRQ)
_z8_trap_handler:
ENTER(Z8_TRAP_IRQ)
_z8_pwmtimer_handler:
ENTER(Z8_PWMTIMER_IRQ)
_z8_pwmfault_handler:
ENTER(Z8_PWMFAULT_IRQ)
if EZ8_ADC_NEW=1
_z8_adc_handler:
ENTER(Z8_ADC_IRQ)
endif
_z8_cmp_handler:
ENTER(Z8_CMP_IRQ)
_z8_timer0_handler:
ENTER(Z8_TIMER0_IRQ)
if EZ8_UART0
_z8_uart0rx_handler:
ENTER(Z8_UART0_RX_IRQ)
_z8_uart0tx_handler:
ENTER(Z8_UART0_TX_IRQ)
endif
if EZ8_SPI=1
_z8_spi_handler:
ENTER(Z8_SPI_IRQ)
endif
if EZ8_I2C=1
_z8_i2c_handler:
ENTER(Z8_I2C_IRQ)
endif
_z8_c0_handler:
ENTER(Z8_C0_IRQ)
_z8_pb_handler:
ENTER(Z8_PB_IRQ)
_z8_p7ap3a_handler:
ENTER(Z8_P7A_IRQ)
_z8_p6ap2a_handler:
ENTER(Z8_P6AP2A_IRQ)
_z8_p5ap1a_handler:
ENTER(Z8_P5AP1A_IRQ)
_z8_p4ap0a_handler:
ENTER(Z8_P4AP0A_IRQ)
_z8_potrap_handler:
ENTER(Z8_POTRAP_IRQ)
_z8_wotrap_handler:
ENTER(Z8_WOTRAP_IRQ)
#endif
/**************************************************************************
* Name: _z16f_common_handler
*
* Description:
* Common IRQ handling logic
*
* On entry, the stack contains the following:
*
* TOS before interrupt
* PC[7:0]
* PC[15:8]
* Flags Register
* SP -> RP
*
* R0 holds the IRQ number and the RP has been reset to %f0
*
**************************************************************************/
_z8_common_handler:
/* Pass the address of the IRQ stack frame */
ldx r2, sph /* rr2 = stack pointer */
ldx r3, spl
push r3 /* Pass as a parameter */
push r2
/* Pass the IRQ number */
push r0
/* Process the interrupt */
call _up_doirq /* Call the IRQ handler */
/* Release arguments from the stack */
pop r4 /* Discard the IRQ argument */
pop r2 /* Recover the stack pointer parameter */
pop r3
/* If a interrupt level context switch occurred, then the
* return value will be the same as the input value
*/
cp r0, r2 /* Same as the return value? */
jr nz, _z8_switch
cp r1, r3
jr z, _z8_noswitch
/* A context switch occurs. Restore the use context.
* rr0 = pointer to context structgure.
*/
_z8_switch:
/* Destroy the interrupt return information on the stack */
pop r4 /* Destroy saved RP */
pop r4 /* Destroy saved flags */
pop r4 /* Destroy saved return address */
pop r4
/* Copy all registers into the user register area. */
clr r2 /* rr2 = destination address */
ldx r3, XCPT_RP_OFFS(rr0)
ld r4, r0 /* rr4 = source address */
ld r5, r1
ld r6, #16 /* r6 = number of bytes to copy */
_z8_restore:
ldx r7, @rr4
ldx @rr2, r7
incw rr2
incw rr4
djnz r6, _z8_restore
/* Set the new stack pointer */
ldx r2, XCPT_SPH_OFFS(rr0)
ldx r3, XCPT_SPL_OFFS(rr0)
ldx sph, r2
ldx spl, r3
/* Push the return address onto the stack */
ldx r2, XCPT_PCH_OFFS(rr0)
ldx r3, XCPT_PCL_OFFS(rr0)
push r3
push r2
/* Recover the flags and RP settings.. but don't restore them yet */
ldx r3, XCPT_FLAGS_OFFS(rr0)
ldx r4, XCPT_RP_OFFS(rr0)
/* Determine whether interrupts must be enabled on return. This
* would be nicer to do below, but later we will need to preserve
* the condition codes in the flags.
*/
ldx r2, XCPT_IRQCTL_OFFS(rr0)
tm r2, #%80
jr nz, _z8_returnenabled
/* Restore the flag settings */
ldx flags, r3
/* Restore the user register page and return with interrupts disabled.
* Note that we cannot use the iret instruction because it unconditionally
* re-enabled interrupts
*/
ldx rp, r4 /* Does not effect flags */
ret /* Does not effect flags */
_z8_returnenabled:
/* Restore the flag settings */
ldx flags, r1
/* Restore the user register page, re-enable interrupts and return.
* Note that we cannot use the iret instruction because it unconditionally
* re-enabled interrupts
*/
ldx rp, r4 /* Does not effect flags */
ei /* Does not effect flags */
ret /* Does not effect flags */
_z8_noswitch:
LEAVE
/**************************************************************************
* Data
**************************************************************************/
/* Set aside area for interrupt registers */
define interruptreg, space=rdata, org=%f0
segment interruptreg
ds %10
end _z8_common_handler