|
|
/****************************************************************************************************
* configs/stm3240g_eval/src/stm3240g_internal.h
* arch/arm/src/board/stm3240g_internal.n
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H
#define __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* Configuration ************************************************************************************/
/* How many SPI modules does this chip support? */
#if STM32_NSPI < 1
# undef CONFIG_STM32_SPI1
# undef CONFIG_STM32_SPI2
# undef CONFIG_STM32_SPI3
#elif STM32_NSPI < 2
# undef CONFIG_STM32_SPI2
# undef CONFIG_STM32_SPI3
#elif STM32_NSPI < 3
# undef CONFIG_STM32_SPI3
#endif
/* You can use either CAN1 or CAN2, but you can't use both because they share the same transceiver */
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
# warning "The STM3250G-EVAL will only support one of CAN1 and CAN2"
#endif
/* You can't use CAN1 with FSMC:
*
* PD0 = FSMC_D2 & CAN1_RX
* PD1 = FSMC_D3 & CAN1_TX
*/
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_FSMC)
# warning "The STM3250G-EVAL will only support one of CAN1 and FSMC"
#endif
/* The USB OTG HS ULPI bus is shared with CAN2 bus:
*
* PB13 = ULPI_D6 & CAN2_TX
* PB5 = ULPI_D7 & CAN2_RX
*/
#if defined(CONFIG_STM32_CAN2) && defined(CONFIG_STM32_OTGHS)
# warning "The STM3250G-EVAL will only support one of CAN2 and USB OTG HS"
#endif
/* STM3240G-EVAL GPIOs ******************************************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN6)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN8)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN9)
#define GPIO_LED4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN7)
/* BUTTONS -- NOTE that all have EXTI interrupts configured */
#define MIN_IRQBUTTON BUTTON_WAKEUP
#define MAX_IRQBUTTON BUTTON_USER
#define NUM_IRQBUTTONS (BUTTON_USER - BUTTON_WAKEUP + 1)
#define GPIO_BTN_WAKEUP (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0)
#define GPIO_BTN_TAMPER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN13)
#define GPIO_BTN_USER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN15)
/* PWM
*
* The STM3240G-Eval has no real on-board PWM devices, but the board can be
* configured to output a pulse train using TIM4, TIM1, or TIM8 (see board.h).
* Let's figure out which the user has configured.
*/
#ifdef CONFIG_PWM
# if defined(CONFIG_STM32_TIM1_PWM)
# define STM3240G_EVAL_PWMTIMER 1
# elif defined(CONFIG_STM32_TIM4_PWM)
# define STM3240G_EVAL_PWMTIMER 4
# elif defined(CONFIG_STM32_TIM8_PWM)
# define STM3240G_EVAL_PWMTIMER 8
# endif
#endif
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/* GPIO settings that will be altered when external memory is selected:
*
* ----- ------- -------- ------------ ------- ------------ -------- ----------- -------- -------------
* PB7: FSMC NL PD0-1: FSMC D2-D3 PE0: FSMC NBL0 PF0-5: FSMC A0-A5 PG0-5: FSMC A10-A15
* PD3: FSMC CLK PE1: FSMC BLN1 PF6: FSMC NIORD PG6-7: FSMC INT2-3
* PD4: FSMC NOE PE2: FSMC A23 PF7: FSMC NREG PG9: FSMC NCE3
* PD5: FSMC NWE PE3-6: FSMC A19-A22 PF8: FSMC NIOWR PG9-10: FSMC NE2-3
* PD6: FSMC NWAIT PE7-15: FSMC D4-D12 PF9: FSMC CD PG10: FSMC NCE4 (1)
* PD7: FSMC NE1 PF10: FSMC INTR PG11: FSMC NCE4 (2)
* PD7: FSMC NCE2 PF12-15: FSMC A6-A9 PG12: FSMC NE4
* PD8-10: FSMC D13-D15 PG13-14: FSMC A24-A25
* PD11-13: FSMC_A16-A18
* PD14-15: FSMC D0-D1
*/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the STM3240G-EVAL board.
*
****************************************************************************************************/
void weak_function stm32_spiinitialize(void);
/************************************************************************************
* Name: stm32_extmemgpios
*
* Description:
* Initialize GPIOs for external memory usage
*
************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemgpios(const uint32_t *gpios, int ngpios);
#endif
/************************************************************************************
* Name: stm32_extmemaddr
*
* Description:
* Initialize adress line GPIOs for external memory access
*
************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemaddr(int naddrs);
#endif
/************************************************************************************
* Name: stm32_extmemdata
*
* Description:
* Initialize data line GPIOs for external memory access
*
************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemdata(int ndata);
#endif
/************************************************************************************
* Name: stm32_enablefsmc
*
* Description:
* enable clocking to the FSMC module
*
************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_enablefsmc(void);
#endif
/************************************************************************************
* Name: stm32_disablefsmc
*
* Description:
* enable clocking to the FSMC module
*
************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_disablefsmc(void);
#endif
/************************************************************************************
* Name: stm32_selectsram
*
* Description:
* Initialize to access external SRAM. SRAM will be visible at the FSMC Bank
* NOR/SRAM2 base address (0x64000000)
*
* General transaction rules. The requested AHB transaction data size can be 8-,
* 16- or 32-bit wide whereas the SRAM has a fixed 16-bit data width. Some simple
* transaction rules must be followed:
*
* Case 1: AHB transaction width and SRAM data width are equal
* There is no issue in this case.
* Case 2: AHB transaction size is greater than the memory size
* In this case, the FSMC splits the AHB transaction into smaller consecutive
* memory accesses in order to meet the external data width.
* Case 3: AHB transaction size is smaller than the memory size.
* SRAM supports the byte select feature.
* a) FSMC allows write transactions accessing the right data through its
* byte lanes (NBL[1:0])
* b) Read transactions are allowed (the controller reads the entire memory
* word and uses the needed byte only). The NBL[1:0] are always kept low
* during read transactions.
*
************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_selectsram(void);
#endif
/************************************************************************************
* Name: stm32_deselectsram
*
* Description:
* Disable SRAM
*
************************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_deselectsram(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H */
|
