/************************************************************************************
* configs/sure-pic32mx/src/pic32mx_spi.c
*
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/spi/spi.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "pic32mx-internal.h"
#include "sure-pic32mx.h"
#if defined(CONFIG_PIC32MX_SPI2)
/************************************************************************************
* Definitions
************************************************************************************/
#ifdef CONFIG_ARCH_DBDP11215
/* The Sure DB_DP11215 PIC32 Storage Demo Board has an SD slot connected on SPI2:
*
* SCK2/PMA5/CN8/RG6 SCK SD connector SCK, FLASH (U1) SCK*
* SDI2/PMA4/CN9/RG7 SDI SD connector DO, FLASH (U1) SO*
* SDO2/PMA3/CN10/RG8 SDO SD connector DI, FLASH (U1) SI*
*
* Chip Select. Pulled up on-board
* TDO/AN11/PMA12/RB11 SD_CS SD connector CS
*
* Status inputs. All pulled up on-board
*
* TCK/AN12/PMA11/RB12 SD_CD SD connector CD
* TDI/AN13/PMA10/RB13 SD_WD SD connector WD
*/
# define PIC32_HAVE_SD 1
# define GPIO_SD_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTB|GPIO_PIN11)
# define GPIO_SD_CD (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN12)
# define GPIO_SD_WD (GPIO_INPUT|GPIO_PORTB|GPIO_PIN13)
/* The Sure DB_DP11215 PIC32 Storage Demo Board has pads an SOIC (Flash or
* EEPROM) connected on SPI2, however, U4 is not populated on my board.
*
*
* TMS/AN10/CVREFOUT/PMA13/RB10 UTIL_WP FLASH (U1) WP
* SS2/PMA2/CN11/RG9 UTIL_CS FLASH (U1) CS
*/
# undef PIC32_HAVE_SOIC
# define GPIO_SOIC_WP (GPIO_INPUT|GPIO_PORTB|GPIO_PIN10)
# define GPIO_SOIC_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTG|GPIO_PIN0)
/* Change notification numbers -- Not available for SD_CD. */
#endif
#ifdef CONFIG_ARCH_DBDP11212
/* The Sure DB-DP11212 PIC32 General Purpose Demo Board does not have an
* SD slot.
*/
# undef PIC32_HAVE_SD
/* The Sure DB-DP11212 PIC32 General Purpose Demo Board has an SOIC (Flash or
* EEPROM) connected on SPI2:
*
*
* TMS/AN10/PMA13/RB10 UTIL_WP FLASH (U4) WP
* TDO/AN11/PMA12/RB11 UTIL_CS FLASH (U4) CS
*/
# define PIC32_HAVE_SOIC 1
# define GPIO_SOIC_WP (GPIO_INPUT|GPIO_PORTB|GPIO_PIN10)
# define GPIO_SOIC_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTB|GPIO_PIN11)
#endif
/* The following enable debug output from this file.
*
* CONFIG_DEBUG_SPI && CONFIG_DEBUG - Define to enable basic SPI debug
* CONFIG_DEBUG_VERBOSE - Define to enable verbose SPI debug
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_SPI
# undef CONFIG_DEBUG_VERBOSE
#endif
#ifdef CONFIG_DEBUG_SPI
# define spidbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define spivdbg lldbg
# else
# define spivdbg(x...)
# endif
#else
# define spidbg(x...)
# define spivdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: pic32mx_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Sure PIC32MX board.
*
************************************************************************************/
void weak_function pic32mx_spiinitialize(void)
{
/* Configure the SPI2 chip select (CS) GPIO output, and the card detect (CD) and
* write protect (WP) inputs.
*/
#ifdef PIC32_HAVE_SD
pic32mx_configgpio(GPIO_SD_CS);
pic32mx_configgpio(GPIO_SD_CD);
pic32mx_configgpio(GPIO_SD_WD);
#endif
#ifdef PIC32_HAVE_SOIC
pic32mx_configgpio(GPIO_SOIC_WP);
pic32mx_configgpio(GPIO_SOIC_CS);
#endif
}
/************************************************************************************
* Name: pic32mx_spi2select and pic32mx_spi2status
*
* Description:
* The external functions, pic32mx_spi2select and pic32mx_spi2status
* must be provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
* are provided by common PIC32MX logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in pic32mx_boardinitialize() to configure SPI/SPI chip select
* pins.
* 2. Provide pic32mx_spi2select() and pic32mx_spi2status() functions
* in your board-specific logic. These functions will perform chip selection
* and status operations using GPIOs in the way your board is configured.
* 3. Add a calls to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
************************************************************************************/
#ifdef CONFIG_PIC32MX_SPI2
void pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spivdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
/* The SD card chip select is pulled high and active low */
#ifdef PIC32_HAVE_SD
if (devid == SPIDEV_MMCSD)
{
pic32mx_gpiowrite(GPIO_SD_CS, !selected);
}
#endif
#ifdef PIC32_HAVE_SOIC
if (devid == SPIDEV_FLASH)
{
pic32mx_gpiowrite(GPIO_SOIC_CS, !selected);
}
#endif
}
uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
uint8_t ret = 0;
/* Card detect is pull up on-board. If a low value is sensed then the
* card must be present.
*/
#ifdef PIC32_HAVE_SD
if (devid == SPIDEV_MMCSD)
{
if (!pic32mx_gpioread(GPIO_SD_CD))
{
ret = SPI_STATUS_PRESENT;
/* It seems that a high value indicates the the card is write
* protected.
*/
if (pic32mx_gpioread(GPIO_SD_WD))
{
ret |= SPI_STATUS_WRPROTECTED;
}
}
}
#endif
#ifdef PIC32_HAVE_SOIC
if (devid == SPIDEV_FLASH)
{
ret = SPI_STATUS_PRESENT;
/* Write protect is indicated with a low value. */
if (pic32mx_gpioread(GPIO_SOIC_WP))
{
ret |= SPI_STATUS_WRPROTECTED;
}
}
#endif
spivdbg("Returning %d\n", ret);
return ret;
}
#endif
#endif /* CONFIG_PIC32MX_SPI2 */