/****************************************************************************
* drivers/mtd/smart.c
*
* Sector Mapped Allocation for Really Tiny (SMART) Flash block driver.
*
* Copyright (C) 2013-2014 Ken Pettit. All rights reserved.
* Author: Ken Pettit <pettitkd@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <debug.h>
#include <errno.h>
#include <crc8.h>
#include <crc16.h>
#include <crc32.h>
#include <nuttx/kmalloc.h>
#include <nuttx/fs/fs.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/mtd/mtd.h>
#include <nuttx/mtd/smart.h>
#include <nuttx/fs/smart.h>
/****************************************************************************
* Private Definitions
****************************************************************************/
//#define CONFIG_SMART_LOCAL_CHECKFREE
#define SMART_STATUS_COMMITTED 0x80
#define SMART_STATUS_RELEASED 0x40
#define SMART_STATUS_CRC 0x20
#define SMART_STATUS_SIZEBITS 0x1C
#define SMART_STATUS_VERBITS 0x03
#if defined(CONFIG_SMART_CRC_16)
#define SMART_STATUS_VERSION 0x02
#elif defined(CONFIG_SMART_CRC_32)
#define SMART_STATUS_VERSION 0x03
#else
#define SMART_STATUS_VERSION 0x01
#endif
#define SMART_SECTSIZE_256 0x00
#define SMART_SECTSIZE_512 0x04
#define SMART_SECTSIZE_1024 0x08
#define SMART_SECTSIZE_2048 0x0C
#define SMART_SECTSIZE_4096 0x10
#define SMART_SECTSIZE_8192 0x14
#define SMART_SECTSIZE_16384 0x18
#define SMART_FMT_STAT_UNKNOWN 0
#define SMART_FMT_STAT_FORMATTED 1
#define SMART_FMT_STAT_NOFMT 2
#define SMART_FMT_POS1 sizeof(struct smart_sect_header_s)
#define SMART_FMT_POS2 (SMART_FMT_POS1 + 1)
#define SMART_FMT_POS3 (SMART_FMT_POS1 + 2)
#define SMART_FMT_POS4 (SMART_FMT_POS1 + 3)
#define SMART_FMT_SIG1 'S'
#define SMART_FMT_SIG2 'M'
#define SMART_FMT_SIG3 'R'
#define SMART_FMT_SIG4 'T'
#define SMART_FMT_VERSION_POS (SMART_FMT_POS1 + 4)
#define SMART_FMT_NAMESIZE_POS (SMART_FMT_POS1 + 5)
#define SMART_FMT_ROOTDIRS_POS (SMART_FMT_POS1 + 6)
#define SMARTFS_FMT_WEAR_POS 36
#define SMART_WEAR_LEVEL_FORMAT_SIG 32
#define SMART_PARTNAME_SIZE 4
#define SMART_FIRST_DIR_SECTOR 3 /* First root directory sector */
#define SMART_FIRST_ALLOC_SECTOR 12 /* First logical sector number we will
* use for assignment of requested Alloc
* sectors. All enries below this are
* reserved (some for root dir entries,
* other for our use, such as format
* sector, etc. */
#if defined(CONFIG_MTD_SMART_READAHEAD) || (defined(CONFIG_DRVR_WRITABLE) && \
defined(CONFIG_MTD_SMART_WRITEBUFFER))
# define SMART_HAVE_RWBUFFER 1
#endif
#ifndef CONFIG_MTD_SMART_SECTOR_SIZE
# define CONFIG_MTD_SMART_SECTOR_SIZE 1024
#endif
#ifndef offsetof
#define offsetof(type, member) ( (size_t) &( ( (type *) 0)->member))
#endif
#define SMART_MAX_ALLOCS 6
//#define CONFIG_MTD_SMART_PACK_COUNTS
#ifndef CONFIG_MTD_SMART_ALLOC_DEBUG
#define smart_malloc(d, b, n) kmm_malloc(b)
#define smart_free(d, p) kmm_free(p)
#endif
#define SMART_WEAR_FULL_RELOCATE_THRESHOLD 8
#define SMART_WEAR_REORG_THRESHOLD 14
#define SMART_WEAR_MIN_LEVEL 5
#define SMART_WEAR_FORCE_REORG_THRESHOLD 1
#define SMART_WEAR_BIT_DIVIDE 1
#define SMART_WEAR_ZERO_MASK 0x0F
#define SMART_WEAR_BLOCK_MASK 0x01
/* Bit mapping for wear level bits */
/* These are defined to allow updating the wear leveling with the minimum
* number of sector relocations / maximum use of 1 --> 0 transitions when
* incrementing the wear level.
*
* 0: 1111 8: 1011
* 1: 1110 9: 1010
* 2: 1100 10: 0010
* 3: 1000 11: 1101
* 4: 0111 12: 1001
* 5: 0110 13: 0001
* 6: 0100 14: 0011
* 7: 0000 15: 0101
*/
static const uint8_t gWearLevelToBitMap4[] =
{
0x0F, 0x0E, 0x0C, 0x08, /* Single bit erased (x3) */
0x07, 0x06, 0x04, 0x00, /* Single bit erased (x3) */
0x0B, 0x0A, 0x02, /* Single bit erased (x2) */
0x0D, 0x09, 0x01, /* Single bit erased (x2) */
0x03,
0x05
};
/* Map a Wear Level bit pattern back to the wear level */
static const uint8_t gWearBitToLevelMap4[] =
{
7, 13, 10, 14, 6, 15, 5, 4,
3, 12, 9, 8, 2, 11, 1, 0
};
/****************************************************************************
* Private Types
****************************************************************************/
#ifdef CONFIG_MTD_SMART_MINIMIZE_RAM
struct smart_cache_s
{
uint16_t logical; /* Logical sector number */
uint16_t physical; /* Associated physical sector */
uint16_t birth; /* The "birthday" of this entry */
};
#endif
/* When CRC is enabled, we allocate sectors in memory only and only write
* to the device when an actual writesector is performed. If during the
* alloc process we do a physical write, we would either have to hold off on
* writing the CRC value (which creates an invalid state on the device) or
* we would have to perform a write, release re-write every time which would
* increase the wear of the device 2x.
*/
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
struct smart_allocsector_s
{
struct smart_allocsector_s *next; /* Pointer to next alloc sector */
uint16_t logical; /* Logical sector number */
uint16_t physical; /* Associated physical sector */
};
#endif
struct smart_struct_s
{
FAR struct mtd_dev_s *mtd; /* Contained MTD interface */
struct mtd_geometry_s geo; /* Device geometry */
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
uint32_t unusedsectors; /* Count of unused sectors (i.e. free when erased) */
uint32_t blockerases; /* Count of unused sectors (i.e. free when erased) */
#endif
uint16_t neraseblocks; /* Number of erase blocks or sub-sectors */
uint16_t lastallocblock; /* Last block we allocated a sector from */
uint16_t freesectors; /* Total number of free sectors */
uint16_t releasesectors; /* Total number of released sectors */
uint16_t mtdBlksPerSector; /* Number of MTD blocks per SMART Sector */
uint16_t sectorsPerBlk; /* Number of sectors per erase block */
uint16_t sectorsize; /* Sector size on device */
uint16_t totalsectors; /* Total number of sectors on device */
uint32_t erasesize; /* Size of an erase block */
FAR uint8_t *releasecount; /* Count of released sectors per erase block */
FAR uint8_t *freecount; /* Count of free sectors per erase block */
FAR char *rwbuffer; /* Our sector read/write buffer */
char partname[SMART_PARTNAME_SIZE]; /* Optional partition name */
uint8_t formatversion; /* Format version on the device */
uint8_t formatstatus; /* Indicates the status of the device format */
uint8_t namesize; /* Length of filenames on this device */
uint8_t debuglevel; /* Debug reporting level */
uint8_t availSectPerBlk; /* Number of usable sectors per erase block */
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
uint8_t rootdirentries; /* Number of root directory entries */
uint8_t minor; /* Minor number of the block entry */
#endif
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
uint8_t wearflags; /* Indicates force erase of static blocks needed */
uint8_t minwearlevel; /* Min level in the wear level bits */
uint8_t maxwearlevel; /* Max level in the wear level bits */
uint8_t *wearstatus; /* Array of wear leveling bits */
uint32_t uneven_wearcount; /* Number of times the the wear level has gone over max */
#endif
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
FAR struct smart_allocsector_s *allocsector; /* Pointer to first alloc sector */
#endif
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
FAR uint16_t *sMap; /* Virtual to physical sector map */
#else
FAR uint8_t *sBitMap; /* Virtual sector used bit-map */
FAR struct smart_cache_s *sCache; /* Sector cache */
uint16_t cache_entries; /* Number of valid entries in the cache */
uint16_t cache_lastlog; /* Keep track of the last sector accessed */
uint16_t cache_lastphys; /* Keep the physical sector number also */
uint16_t cache_nextbirth; /* Sector cache aging value */
#endif
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
FAR uint8_t *erasecounts; /* Number of erases for each erase block */
#endif
#ifdef CONFIG_MTD_SMART_ALLOC_DEBUG
size_t bytesalloc;
struct smart_alloc_s alloc[SMART_MAX_ALLOCS]; /* Array of memory allocations */
#endif
};
#define SMART_WEARFLAGS_FORCE_REORG 0x01
#define SMART_WEARFLAGS_WRITE_NEEDED 0x02
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
struct smart_multiroot_device_s
{
FAR struct smart_struct_s* dev;
uint8_t rootdirnum;
};
#endif
/* Format 1 sector header definition */
#if SMART_STATUS_VERSION == 1
#define SMART_FMT_VERSION 1
struct smart_sect_header_s
{
uint8_t logicalsector[2]; /* The logical sector number */
uint8_t seq; /* Incrementing sequence number */
uint8_t crc8; /* CRC-8 or seq number MSB */
uint8_t status; /* Status of this sector:
* Bit 7: 1 = Not commited
* 0 = commited
* Bit 6: 1 = Not released
* 0 = released
* Bit 5: Sector CRC enable
* Bit 4-2: Sector size on volume
* Bit 1-0: Format version (0x1) */
};
typedef uint8_t crc_t;
/* Format 2 sector header definition. This is for a 16-bit CRC */
#elif SMART_STATUS_VERSION == 2
#define SMART_FMT_VERSION 2
struct smart_sect_header_s
{
uint8_t logicalsector[2]; /* The logical sector number */
uint8_t crc16[2]; /* CRC-16 for this sector */
uint8_t status; /* Status of this sector:
* Bit 7: 1 = Not commited
* 0 = commited
* Bit 6: 1 = Not released
* 0 = released
* Bit 5: Sector CRC enable
* Bit 4-2: Sector size on volume
* Bit 1-0: Format version (0x2) */
uint8_t seq; /* Incrementing sequence number */
};
typedef uint16_t crc_t;
/* Format 3 (32-bit) sector header definition. Actually, this format
* isn't used yet and will likely be changed to a format to support
* NAND devices (possibly with an 18-bit sector size, allowing up to
* 256K sectors on a larger NAND device, though this would take a fair
* amount of RAM for management).
*/
#elif SMART_STATUS_VERSION == 3
#error "32-Bit mode not supported yet"
#define SMART_FMT_VERSION 3
struct smart_sect_header_s
{
uint8_t logicalsector[4]; /* The logical sector number */
uint8_t crc32[4]; /* CRC-32 for this sector */
uint8_t status; /* Status of this sector:
* Bit 7: 1 = Not commited
* 0 = commited
* Bit 6: 1 = Not released
* 0 = released
* Bit 5: Sector CRC enable
* Bit 4-2: Sector size on volume
* Bit 1-0: Format version (0x3) */
uint8_t seq; /* Incrementing sequence number */
};
typedef uint32_t crc_t;
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int smart_open(FAR struct inode *inode);
static int smart_close(FAR struct inode *inode);
static ssize_t smart_reload(struct smart_struct_s *dev, FAR uint8_t *buffer,
off_t startblock, size_t nblocks);
static ssize_t smart_read(FAR struct inode *inode, unsigned char *buffer,
size_t start_sector, unsigned int nsectors);
#ifdef CONFIG_FS_WRITABLE
static ssize_t smart_write(FAR struct inode *inode, const unsigned char *buffer,
size_t start_sector, unsigned int nsectors);
#endif
static int smart_geometry(FAR struct inode *inode, struct geometry *geometry);
static int smart_ioctl(FAR struct inode *inode, int cmd, unsigned long arg);
static int smart_findfreephyssector(FAR struct smart_struct_s *dev, uint8_t canrelocate);
#ifdef CONFIG_FS_WRITABLE
static int smart_writesector(FAR struct smart_struct_s *dev, unsigned long arg);
#endif
static int smart_readsector(FAR struct smart_struct_s *dev, unsigned long arg);
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
static int smart_read_wearstatus(FAR struct smart_struct_s *dev);
static int smart_relocate_static_data(FAR struct smart_struct_s *dev, uint16_t block);
#endif
static int smart_relocate_sector(FAR struct smart_struct_s *dev,
uint16_t oldsector, uint16_t newsector);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct block_operations g_bops =
{
smart_open, /* open */
smart_close, /* close */
smart_read, /* read */
#ifdef CONFIG_FS_WRITABLE
smart_write, /* write */
#else
NULL, /* write */
#endif
smart_geometry, /* geometry */
smart_ioctl /* ioctl */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: smart_open
*
* Description: Open the block device
*
****************************************************************************/
static int smart_open(FAR struct inode *inode)
{
fvdbg("Entry\n");
return OK;
}
/****************************************************************************
* Name: smart_close
*
* Description: close the block device
*
****************************************************************************/
static int smart_close(FAR struct inode *inode)
{
fvdbg("Entry\n");
return OK;
}
/****************************************************************************
* Name: smart_malloc
*
* Description: Perform allocations and keep track of amount of allocated
* memory for this context.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_ALLOC_DEBUG
FAR static void* smart_malloc(FAR struct smart_struct_s *dev,
size_t bytes, const char *name)
{
void* ret = kmm_malloc(bytes);
uint8_t x;
/* Keep track of the total allocation */
if (ret != NULL)
{
dev->bytesalloc += bytes;
}
/* Keep track of individual allocs */
for (x = 0; x < SMART_MAX_ALLOCS; x++)
{
if (dev->alloc[x].ptr == NULL)
{
dev->alloc[x].ptr = ret;
dev->alloc[x].size = bytes;
dev->alloc[x].name = name;
break;
}
}
fdbg("SMART alloc: %ld\n", dev->bytesalloc);
return ret;
}
#endif
/****************************************************************************
* Name: smart_free
*
* Description: Perform smart memory free operation.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_ALLOC_DEBUG
static void smart_free(FAR struct smart_struct_s *dev, FAR void* ptr)
{
uint8_t x;
for (x = 0; x < SMART_MAX_ALLOCS; x++)
{
if (dev->alloc[x].ptr == ptr)
{
dev->alloc[x].ptr = NULL;
dev->bytesalloc -= dev->alloc[x].size;
kmm_free(ptr);
break;
}
}
}
#endif
/****************************************************************************
* Name: smart_set_count
*
* Description: Set either the freecount or releasecount value for the
* specified eraseblock (depending on which pointer is passed).
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
static void smart_set_count(FAR struct smart_struct_s *dev, FAR uint8_t* pCount,
uint16_t block, uint8_t count)
{
if (dev->sectorsPerBlk > 16)
{
pCount[block] = count;
}
else
{
/* Save the lower 4 bits of the count in a shared byte */
if (block & 0x01)
{
pCount[block >> 1] = (pCount[block >> 1] & 0xF0) | (count & 0x0F);
}
else
{
pCount[block >> 1] = (pCount[block >> 1] & 0x0F) | ((count & 0x0F) << 4);
}
/* If we have 16 sectors per block, then the upper bit (representing 16)
* all get packed into shared bytes.
*/
if (dev->sectorsPerBlk == 16)
{
if (count == 16)
{
pCount[(dev->geo.neraseblocks >> 1) + (block>>3)] |= 1 << (block & 0x07);
}
else
{
pCount[(dev->geo.neraseblocks >> 1) + (block>>3)] &= ~(1 << (block & 0x07));
}
}
}
}
#endif
/****************************************************************************
* Name: smart_get_count
*
* Description: Get either the freecount or releasecount value for the
* specified eraseblock (depending on which pointer is passed).
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
static uint8_t smart_get_count(FAR struct smart_struct_s *dev,
FAR uint8_t* pCount, uint16_t block)
{
uint8_t count;
if (dev->sectorsPerBlk > 16)
{
count = pCount[block];
}
else
{
/* Save the lower 4 bits of the count in a shared byte */
if (block & 0x01)
{
count = pCount[block >> 1] & 0x0F;
}
else
{
count = pCount[block >> 1] >> 4;
}
/* If we have 16 sectors per block, then the upper bit (representing 16)
* all get packed into shared bytes.
*/
if (dev->sectorsPerBlk == 16)
{
if (pCount[(dev->geo.neraseblocks >> 1) + (block>>3)] & (1 << (block & 0x07)))
{
count |= 0x10;
}
}
}
return count;
}
#endif
/****************************************************************************
* Name: smart_add_count
*
* Description: Add the specified value to and eraseblock count.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
static void smart_add_count(struct smart_struct_s *dev, uint8_t* pCount,
uint16_t block, int adder)
{
int16_t value;
value = smart_get_count(dev, pCount, block) + adder;
smart_set_count(dev, pCount, block, value);
}
#endif
/****************************************************************************
* Name: smart_checkfree
*
* Description: A debug routine for validating the free sector count used
* during development of the wear leveling code.
*
****************************************************************************/
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
int smart_checkfree(FAR struct smart_struct_s *dev, int lineno)
{
uint16_t x, freecount;
#ifdef CONFIG_DEBUG_FS
uint16_t blockfree, blockrelease;
static uint16_t prev_freesectors = 0;
static uint16_t prev_releasesectors = 0;
static uint8_t *prev_freecount = NULL;
static uint8_t *prev_releasecount = NULL;
#endif
freecount = 0;
for (x = 0; x < dev->neraseblocks; x++)
{
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
freecount += smart_get_count(dev, dev->freecount, x);
#else
freecount += dev->freecount[x];
#endif
}
/* Test if the calculated freesectors equals the reported value */
#ifdef CONFIG_DEBUG_FS
if (freecount != dev->freesectors)
{
fdbg("Free count incorrect in line %d! Calculated=%d, dev->freesectors=%d\n",
lineno, freecount, dev->freesectors);
/* Determine what changed from the last time which caused this error */
fdbg(" ... Prev freesectors=%d, prev releasesectors=%d\n",
prev_freesectors, prev_releasesectors);
if (prev_freecount)
{
for (x = 0; x < dev->neraseblocks; x++)
{
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
blockfree = smart_get_count(dev, dev->freecount, x);
blockrelease = smart_get_count(dev, dev->releasecount, x);
#else
blockfree = dev->freecount[x];
blockrelease = dev->releasecount[x];
#endif
if (prev_freecount[x] != blockfree || prev_releasecount[x] != blockrelease)
{
/* This block's values are different from the last time ... report it */
fdbg(" ... Block %d: Old Free=%d, old release=%d, New free=%d, new release = %d\n",
x, prev_freecount[x], prev_releasecount[x], blockfree, blockrelease);
}
}
}
/* Modifiy the freesector count to reflect the actual calculated freecount
to get us back in line.
*/
dev->freesectors = freecount;
return -EIO;
}
/* Make a copy of the freecount and releasecount arrays to compare the
* differences between successive calls so we can evaluate what changed
* in the event an error is detected.
*/
if (prev_freecount == NULL)
{
prev_freecount = (FAR uint8_t *) smart_malloc(dev, dev->neraseblocks << 1, "Free backup");
prev_releasecount = prev_freecount + dev->neraseblocks;
}
if (prev_freecount != NULL)
{
for (x = 0; x < dev->neraseblocks; x++)
{
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
prev_freecount[x] = smart_get_count(dev, dev->freecount, x);
prev_releasecount[x] = smart_get_count(dev, dev->releasecount, x);
#else
prev_freecount[x] = dev->freecount[x];
prev_releasecount[x] = dev->releasecount[x];
#endif
}
}
/* Save the previous freesectors count */
prev_freesectors = dev->freesectors;
prev_releasesectors = dev->releasesectors;
#endif
return OK;
}
#endif
/****************************************************************************
* Name: smart_reload
*
* Description: Read the specified numer of sectors
*
****************************************************************************/
static ssize_t smart_reload(struct smart_struct_s *dev, FAR uint8_t *buffer,
off_t startblock, size_t nblocks)
{
ssize_t nread;
ssize_t mtdBlocks, mtdStartBlock;
/* Calculate the number of MTD blocks to read */
mtdBlocks = nblocks * dev->mtdBlksPerSector;
/* Calculate the first MTD block number */
mtdStartBlock = startblock * dev->mtdBlksPerSector;
/* Read the full erase block into the buffer */
fvdbg("Read %d blocks starting at block %d\n", mtdBlocks, mtdStartBlock);
nread = MTD_BREAD(dev->mtd, mtdStartBlock, mtdBlocks, buffer);
if (nread != mtdBlocks)
{
fdbg("Read %d blocks starting at block %d failed: %d\n",
nblocks, startblock, nread);
}
return nread;
}
/****************************************************************************
* Name: smart_read
*
* Description: Read the specified numer of sectors
*
****************************************************************************/
static ssize_t smart_read(FAR struct inode *inode, unsigned char *buffer,
size_t start_sector, unsigned int nsectors)
{
struct smart_struct_s *dev;
fvdbg("SMART: sector: %d nsectors: %d\n", start_sector, nsectors);
DEBUGASSERT(inode && inode->i_private);
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
dev = ((struct smart_multiroot_device_s*) inode->i_private)->dev;
#else
dev = (struct smart_struct_s *)inode->i_private;
#endif
return smart_reload(dev, buffer, start_sector, nsectors);
}
/****************************************************************************
* Name: smart_write
*
* Description: Write (or buffer) the specified number of sectors
*
****************************************************************************/
#ifdef CONFIG_FS_WRITABLE
static ssize_t smart_write(FAR struct inode *inode,
FAR const unsigned char *buffer,
size_t start_sector, unsigned int nsectors)
{
FAR struct smart_struct_s *dev;
off_t alignedblock;
off_t mask;
off_t blkstowrite;
off_t offset;
off_t nextblock;
off_t mtdBlksPerErase;
off_t eraseblock;
size_t remaining;
size_t nxfrd;
int ret;
off_t mtdstartblock, mtdblockcount;
fvdbg("sector: %d nsectors: %d\n", start_sector, nsectors);
DEBUGASSERT(inode && inode->i_private);
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
dev = ((FAR struct smart_multiroot_device_s*) inode->i_private)->dev;
#else
dev = (FAR struct smart_struct_s *)inode->i_private;
#endif
/* I think maybe we need to lock on a mutex here */
/* Get the aligned block. Here is is assumed: (1) The number of R/W blocks
* per erase block is a power of 2, and (2) the erase begins with that same
* alignment.
*/
mask = dev->sectorsPerBlk - 1;
alignedblock = ((start_sector + mask) & ~mask) * dev->mtdBlksPerSector;
/* Convert SMART blocks into MTD blocks */
mtdstartblock = start_sector * dev->mtdBlksPerSector;
mtdblockcount = nsectors * dev->mtdBlksPerSector;
mtdBlksPerErase = dev->mtdBlksPerSector * dev->sectorsPerBlk;
fvdbg("mtdsector: %d mtdnsectors: %d\n", mtdstartblock, mtdblockcount);
/* Start at first block to be written */
remaining = mtdblockcount;
nextblock = mtdstartblock;
offset = 0;
/* Loop for all blocks to be written */
while (remaining > 0)
{
/* If this is an aligned block, then erase the block */
if (alignedblock == nextblock)
{
/* Erase the erase block */
eraseblock = alignedblock / mtdBlksPerErase;
ret = MTD_ERASE(dev->mtd, eraseblock, 1);
if (ret < 0)
{
fdbg("Erase block=%d failed: %d\n", eraseblock, ret);
/* Unlock the mutex if we add one */
return ret;
}
}
/* Calculate the number of blocks to write. */
blkstowrite = mtdBlksPerErase;
if (nextblock != alignedblock)
{
blkstowrite = alignedblock - nextblock;
}
if (blkstowrite > remaining)
{
blkstowrite = remaining;
}
/* Try to write to the sector. */
fdbg("Write MTD block %d from offset %d\n", nextblock, offset);
nxfrd = MTD_BWRITE(dev->mtd, nextblock, blkstowrite, &buffer[offset]);
if (nxfrd != blkstowrite)
{
/* The block is not empty!! What to do? */
fdbg("Write block %d failed: %d.\n", nextblock, nxfrd);
/* Unlock the mutex if we add one */
return -EIO;
}
/* Then update for amount written */
nextblock += blkstowrite;
remaining -= blkstowrite;
offset += blkstowrite * dev->geo.blocksize;
alignedblock += mtdBlksPerErase;
}
return nsectors;
}
#endif /* CONFIG_FS_WRITABLE */
/****************************************************************************
* Name: smart_geometry
*
* Description: Return device geometry
*
****************************************************************************/
static int smart_geometry(FAR struct inode *inode, struct geometry *geometry)
{
FAR struct smart_struct_s *dev;
uint32_t erasesize;
fvdbg("Entry\n");
DEBUGASSERT(inode);
if (geometry)
{
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
dev = ((FAR struct smart_multiroot_device_s*) inode->i_private)->dev;
#else
dev = (FAR struct smart_struct_s *)inode->i_private;
#endif
geometry->geo_available = true;
geometry->geo_mediachanged = false;
#ifdef CONFIG_FS_WRITABLE
geometry->geo_writeenabled = true;
#else
geometry->geo_writeenabled = false;
#endif
erasesize = dev->geo.erasesize;
if (erasesize == 0)
{
erasesize = 262144;
}
geometry->geo_nsectors = dev->geo.neraseblocks * erasesize /
dev->sectorsize;
geometry->geo_sectorsize = dev->sectorsize;
fvdbg("available: true mediachanged: false writeenabled: %s\n",
geometry->geo_writeenabled ? "true" : "false");
fvdbg("nsectors: %d sectorsize: %d\n",
geometry->geo_nsectors, geometry->geo_sectorsize);
return OK;
}
return -EINVAL;
}
/****************************************************************************
* Name: smart_setsectorsize
*
* Description: Sets the device's sector size and recalculates sector size
* dependant variables.
*
****************************************************************************/
static int smart_setsectorsize(FAR struct smart_struct_s *dev, uint16_t size)
{
uint32_t erasesize;
uint32_t totalsectors;
uint32_t allocsize;
/* Validate the size isn't zero so we don't divide by zero below */
if (size == 0)
{
size = CONFIG_MTD_SMART_SECTOR_SIZE;
}
if (size == dev->sectorsize)
{
return OK;
}
erasesize = dev->geo.erasesize;
dev->neraseblocks = dev->geo.neraseblocks;
/* Most FLASH devices have erase size of 64K, but geo.erasesize is only
* 16 bits, so it will be zero
*/
if (erasesize == 0)
{
erasesize = 262144;
}
dev->erasesize = erasesize;
dev->sectorsize = size;
dev->mtdBlksPerSector = dev->sectorsize / dev->geo.blocksize;
if (erasesize / dev->sectorsize > 256)
{
/* We can't throw a dbg message here becasue it is too early.
* set the erasesize to zero and exit, then we will detect
* it during mksmartfs or mount.
*/
dev->erasesize = 0;
dev->sectorsPerBlk = 256;
dev->availSectPerBlk = 255;
}
else
{
/* Set the sectors per erase block and available sectors per erase block */
dev->sectorsPerBlk = erasesize / dev->sectorsize;
if (dev->sectorsPerBlk == 256)
{
dev->availSectPerBlk = 255;
}
else
{
dev->availSectPerBlk = dev->sectorsPerBlk;
}
}
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
dev->unusedsectors = 0;
dev->blockerases = 0;
#endif
/* Release any existing rwbuffer and sMap */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
if (dev->sMap != NULL)
{
smart_free(dev, dev->sMap);
dev->sMap = NULL;
}
#else
if (dev->sBitMap != NULL)
{
smart_free(dev, dev->sBitMap);
dev->sBitMap = NULL;
}
dev->cache_entries = 0;
dev->cache_lastlog = 0xFFFF;
dev->cache_nextbirth = 0;
#endif
if (dev->rwbuffer != NULL)
{
smart_free(dev, dev->rwbuffer);
dev->rwbuffer = NULL;
}
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
if (dev->wearstatus != NULL)
{
smart_free(dev, dev->wearstatus);
dev->wearstatus = NULL;
}
#endif
/* Allocate a virtual to physical sector map buffer. Also allocate
* the storage space for releasecount and freecounts.
*/
totalsectors = dev->neraseblocks * dev->sectorsPerBlk;
/* Validate the number of total sectors is small enough for a uint16_t */
if (totalsectors > 65536)
{
dbg("Invalid SMART sector count %ld\n", totalsectors);
return -EINVAL;
}
else if (totalsectors == 65536)
{
/* Special case. We allow 65536 sectors and simply waste 2 sectors
* to allow a smaller sector size with almost maximum flash usage.
*/
totalsectors -= 2;
}
dev->totalsectors = (uint16_t) totalsectors;
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
allocsize = dev->neraseblocks << 1;
dev->sMap = (FAR uint16_t *) smart_malloc(dev, totalsectors * sizeof(uint16_t) +
allocsize, "Sector map");
if (!dev->sMap)
{
fdbg("Error allocating SMART virtual map buffer\n");
goto errexit;
}
dev->releasecount = (FAR uint8_t *) dev->sMap + (totalsectors * sizeof(uint16_t));
dev->freecount = dev->releasecount + dev->neraseblocks;
#else
dev->sBitMap = (FAR uint8_t *) smart_malloc(dev, (totalsectors+7) >> 3, "Sector Bitmap");
if (dev->sBitMap == NULL)
{
fdbg("Error allocating SMART sector cache\n");
goto errexit;
}
/* Calculate the alloc size of the freesector and release sector arrays */
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
if (dev->sectorsPerBlk > 16)
{
allocsize = dev->neraseblocks << 1;
}
else if (dev->sectorsPerBlk == 16)
{
allocsize = dev->neraseblocks + (dev->neraseblocks >> 2);
}
else
{
allocsize = dev->neraseblocks;
}
#else
allocsize = dev->neraseblocks << 1;
#endif
/* Allocate the sector cache */
if (dev->sCache == NULL)
{
dev->sCache = (FAR struct smart_cache_s *) smart_malloc(dev,
CONFIG_MTD_SMART_SECTOR_CACHE_SIZE * sizeof(struct smart_cache_s) +
allocsize, "Sector Cache");
}
if (!dev->sCache)
{
fdbg("Error allocating SMART sector cache\n");
goto errexit;
}
dev->releasecount = (FAR uint8_t *) dev->sCache + (CONFIG_MTD_SMART_SECTOR_CACHE_SIZE *
sizeof(struct smart_cache_s));
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
if (dev->sectorsPerBlk > 16)
{
dev->freecount = dev->releasecount + dev->neraseblocks;
}
else if (dev->sectorsPerBlk == 16)
{
dev->freecount = dev->releasecount + (dev->neraseblocks >> 1) + (dev->neraseblocks >> 3);
}
else
{
dev->freecount = dev->releasecount + (dev->neraseblocks >> 1);
}
#else
dev->freecount = dev->releasecount + dev->neraseblocks;
#endif
#endif /* CONFIG_MTD_SMART_MINIMIZE_RAM */
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
/* Allocate a buffer to hold the erase counts */
if (dev->erasecounts == NULL)
{
dev->erasecounts = (FAR uint8_t *) smart_malloc(dev, dev->neraseblocks, "Erase counts");
}
if (!dev->erasecounts)
{
fdbg("Error allocating erase count array\n");
goto errexit;
}
memset(dev->erasecounts, 0, dev->neraseblocks);
#endif
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
/* Allocate the wear leveling status array */
dev->wearstatus = (FAR uint8_t *) smart_malloc(dev, dev->neraseblocks >>
SMART_WEAR_BIT_DIVIDE, "Wear status");
if (!dev->wearstatus)
{
fdbg("Error allocating wear level status array\n");
goto errexit;
}
memset(dev->wearstatus, CONFIG_SMARTFS_ERASEDSTATE, dev->neraseblocks >>
SMART_WEAR_BIT_DIVIDE);
dev->wearflags = 0;
dev->uneven_wearcount = 0;
#endif
/* Allocate a read/write buffer */
dev->rwbuffer = (FAR char *) smart_malloc(dev, size, "RW Buffer");
if (!dev->rwbuffer)
{
fdbg("Error allocating SMART read/write buffer\n");
goto errexit;
}
return OK;
/* On error for any allocation, we jump here and free anything that had
* previously been allocated.
*/
errexit:
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
if (dev->sMap)
{
smart_free(dev, dev->sMap);
}
#else
if (dev->sBitMap)
{
smart_free(dev, dev->sBitMap);
}
if (dev->sCache)
{
smart_free(dev, dev->sCache);
}
#endif
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
if (dev->wearstatus)
{
smart_free(dev, dev->wearstatus);
}
#endif
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
if (dev->erasecounts)
{
smart_free(dev, dev->erasecounts);
}
#endif
kmm_free(dev);
return -ENOMEM;
}
/****************************************************************************
* Name: smart_bytewrite
*
* Description: Writes a non-page size count of bytes to the underlying
* MTD device. If the MTD driver supports a direct impl of
* write, then it uses it, otherwise it does a read-modify-write
* and depends on the architecture of the flash to only program
* bits that actually changed.
*
****************************************************************************/
static ssize_t smart_bytewrite(FAR struct smart_struct_s *dev, size_t offset,
int nbytes, FAR const uint8_t *buffer)
{
ssize_t ret;
#ifdef CONFIG_MTD_BYTE_WRITE
/* Check if the underlying MTD device supports write */
if (dev->mtd->write != NULL)
{
/* Use the MTD's write method to write individual bytes */
ret = dev->mtd->write(dev->mtd, offset, nbytes, buffer);
}
else
#endif
{
/* Perform block-based read-modify-write */
uint32_t startblock;
uint16_t nblocks;
/* First calculate the start block and number of blocks affected */
startblock = offset / dev->geo.blocksize;
nblocks = (offset - startblock * dev->geo.blocksize + nbytes +
dev->geo.blocksize-1) / dev->geo.blocksize;
DEBUGASSERT(nblocks <= dev->mtdBlksPerSector);
/* Do a block read */
ret = MTD_BREAD(dev->mtd, startblock, nblocks, (FAR uint8_t *) dev->rwbuffer);
if (ret < 0)
{
fdbg("Error %d reading from device\n", -ret);
goto errout;
}
/* Modify the data */
memcpy(&dev->rwbuffer[offset - startblock * dev->geo.blocksize], buffer, nbytes);
/* Write the data back to the device */
ret = MTD_BWRITE(dev->mtd, startblock, nblocks, (FAR uint8_t *) dev->rwbuffer);
if (ret < 0)
{
fdbg("Error %d writing to device\n", -ret);
goto errout;
}
}
ret = nbytes;
errout:
return ret;
}
/****************************************************************************
* Name: smart_add_sector_to_cache
*
* Description: Adds a logical to physical sector maaping to the sector
* map cache. The cache is used to minimize RAM by eliminating
* a one-to-one mapping of all logical sectors and only keeping
* a fixed number of mappings per the
* CONFIG_MTD_SMART_SECTOR_CACHE_SIZE parameter. Sectors are
* automatically managed and removed based on the time since
* they were accessed last.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_MINIMIZE_RAM
static int smart_add_sector_to_cache(FAR struct smart_struct_s *dev,
uint16_t logical, uint16_t physical, int line)
{
uint16_t index, x;
uint16_t oldest;
/* If we aren't full yet, just add the sector to the end of the list */
index = 1;
if (dev->cache_entries < CONFIG_MTD_SMART_SECTOR_CACHE_SIZE)
{
index = dev->cache_entries++;
}
else
{
/* Cache is full. We must find the least accessed entry and replace it */
oldest = 0xFFFF;
for (x = 0; x < CONFIG_MTD_SMART_SECTOR_CACHE_SIZE; x++)
{
/* Never replace cache entries for system sectors */
if (dev->sCache[x].logical < SMART_FIRST_ALLOC_SECTOR)
continue;
/* If the hit count is zero, then choose this entry */
if (dev->sCache[x].birth < oldest)
{
oldest = dev->sCache[x].birth;
index = x;
}
}
}
/* Now add the sector at index */
dev->sCache[index].logical = logical;
dev->sCache[index].physical = physical;
dev->sCache[index].birth = dev->cache_nextbirth++;
dev->cache_lastlog = logical;
dev->cache_lastphys = physical;
if (dev->debuglevel > 1)
{
dbg("Add Cache sector: Log=%d, Phys=%d at index %d from line %d\n",
logical, physical, index, line);
}
/* Test if the birthdays need to be adjusted */
if (oldest >= CONFIG_MTD_SMART_SECTOR_CACHE_SIZE + 1024)
{
for (x = 0; x < dev->cache_entries; x++)
{
dev->sCache[x].birth -= 1024;
}
dev->cache_nextbirth -= 1024;
}
return index;
}
#endif
/****************************************************************************
* Name: smart_cache_lookup
*
* Description: Perform a cache lookup for the requested logical sector.
* If the sector is in the cache, then update the hitcount and
* return the physical mapping. If a cache miss occurs, then
* the routine will scan the volume to find the logical sector
* and add / replace a cache entry with the newly located sector.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_MINIMIZE_RAM
static uint16_t smart_cache_lookup(FAR struct smart_struct_s *dev, uint16_t logical)
{
int ret;
uint16_t block, sector;
uint16_t x, physical, logicalsector;
struct smart_sect_header_s header;
size_t readaddress;
physical = 0xFFFF;
/* Test if searching for the last sector used */
if (logical == dev->cache_lastlog)
{
return dev->cache_lastphys;
}
/* First search for the entry in the cache */
for (x = 0; x < dev->cache_entries; x++)
{
if (dev->sCache[x].logical == logical)
{
/* Entry found in the cache. Grab the physical mapping. */
physical = dev->sCache[x].physical;
break;
}
}
/* If the entry wasn't found in the cache, then we must search the volume
* for it and add it to the cache.
*/
if (physical == 0xFFFF)
{
/* Now scan the MTD device. Instead of scanning start to end, we
* span the erase blocks and read one sector from each at a time.
* this helps speed up the search on volumes that aren't full
* because of sector allocation scheme will use the lower sector
* numbers in each erase block first.
*/
for (sector = 0; sector < dev->sectorsPerBlk && physical == 0xFFFF; sector++)
{
/* Now scan across each erase block */
for (block = 0; block < dev->geo.neraseblocks; block++)
{
/* Calculate the read address for this sector */
readaddress = block * dev->erasesize +
sector * CONFIG_MTD_SMART_SECTOR_SIZE;
/* Read the header for this sector */
ret = MTD_READ(dev->mtd, readaddress,
sizeof(struct smart_sect_header_s), (FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
goto err_out;
}
/* Get the logical sector number for this physical sector */
logicalsector = *((FAR uint16_t *) header.logicalsector);
#if CONFIG_SMARTFS_ERASEDSTATE == 0x00
if (logicalsector == 0)
{
continue;
}
#endif
/* Test if this sector has been committed */
if ((header.status & SMART_STATUS_COMMITTED) ==
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_COMMITTED))
{
continue;
}
/* Test if this sector has been release and skip it if it has */
if ((header.status & SMART_STATUS_RELEASED) !=
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_RELEASED))
{
continue;
}
if ((header.status & SMART_STATUS_VERBITS) != SMART_STATUS_VERSION)
{
continue;
}
/* Test if this is the sector we are looking for */
if (logicalsector == logical)
{
/* This is the sector we are looking for! Add it to the cache */
physical = block * dev->sectorsPerBlk + sector;
smart_add_sector_to_cache(dev, logical, physical, __LINE__ );
break;
}
}
}
}
/* Update the last logical sector found variable */
dev->cache_lastlog = logical;
dev->cache_lastphys = physical;
err_out:
return physical;
}
#endif
/****************************************************************************
* Name: smart_update_cache
*
* Description: Updates a cache entry (if present) replacing the logical
* sector's physical sector mapping with the new one provided.
* This does not affect the hit count.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_MINIMIZE_RAM
static void smart_update_cache(FAR struct smart_struct_s *dev, uint16_t
logical, uint16_t physical)
{
uint16_t x;
/* Scan through all cache entries and find the logical sector entry */
for (x = 0; x < dev->cache_entries; x++)
{
if (dev->sCache[x].logical == logical)
{
/* Entry found. Update it's physical mapping */
dev->sCache[x].physical = physical;
/* If we are freeing a sector, then remove the logical entry from
the cache.
*/
if (physical == 0xFFFF)
{
dev->sCache[x].logical = dev->sCache[dev->cache_entries-1].logical;
dev->sCache[x].physical = dev->sCache[dev->cache_entries-1].physical;
dev->cache_entries--;
}
if (dev->debuglevel > 1)
{
dbg("Update Cache: Log=%d, Phys=%d at index %d\n", logical, physical, x);
}
break;
}
}
if (dev->cache_lastlog == logical)
{
dev->cache_lastphys = physical;
}
}
#endif
/****************************************************************************
* Name: smart_get_wear_level
*
* Description: Gets the wear level of the specified block. Wear levels are
* encoded to minimize the number of zero to one transitions,
* possibly allowing updates to made on NOR devices that have
* no CRC enabled.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
static uint8_t smart_get_wear_level(FAR struct smart_struct_s *dev, uint16_t block)
{
uint8_t bits;
bits = dev->wearstatus[block >> SMART_WEAR_BIT_DIVIDE];
if (block & 0x01)
{
/* Use the upper nibble */
bits >>= 4;
}
else
{
/* Use the lower nibble */
bits &= 0x0F;
}
/* Lookup and return the level using the BitToLevel map */
return gWearBitToLevelMap4[bits];
}
#endif
/****************************************************************************
* Name: smart_find_wear_minmax
*
* Description: Find the minimum and maximum wear levels. This is used when
* we increment the wear level of a minimum value block so that
* we can detect if a new minimum exists and perform normalization
* of the wear-levels.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
static void smart_find_wear_minmax(FAR struct smart_struct_s *dev)
{
uint16_t x;
unsigned char level;
dev->minwearlevel = 15;
dev->maxwearlevel = 0;
/* Loop through all erase blocks and find min / max level */
for (x = 0; x < dev->geo.neraseblocks; x++)
{
/* Find wear level of the minimum worn block */
level = smart_get_wear_level(dev, x);
if (level < dev->minwearlevel)
{
dev->minwearlevel = level;
}
/* Find wear level of the maximum worn block */
if (level > dev->maxwearlevel)
{
dev->maxwearlevel = level;
}
}
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
/* Also adjust the erase counts */
level = 255;
for (x = 0; x < dev->geo.neraseblocks; x++)
{
if (dev->erasecounts[x] < level)
{
level = dev->erasecounts[x];
}
}
if (level != 0)
{
for (x = 0; x < dev->geo.neraseblocks; x++)
{
dev->erasecounts[x] -= level;
}
}
#endif
}
#endif
/****************************************************************************
* Name: smart_set_wear_level
*
* Description: Sets the wear level of the specified block. The wear level
* is a 4-bit field packed 2 entries per byte and is mapped to
* a bit field which minimizes the number of 0 to 1 transitions
* such that entries can be updated on a NOR flash withough the
* need to relocated the format sector (assuming CRC is not
* enabled, in which case a relocated is needed for ANY change).
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
static int smart_set_wear_level(FAR struct smart_struct_s *dev, uint16_t block,
uint8_t level)
{
uint8_t bits, oldlevel;
/* Get the old wear level to test if we need to update min / max */
oldlevel = smart_get_wear_level(dev, block);
/* Get the bit map for this wear level from the static map array */
if (level > 15)
{
dbg("Fatal Design Error! Wear level > 15, block=%d\n", block);
/* This is a design flaw, but we still allow processing, otherwise we
* will corrupt the volume. It's better to have a few blocks that are
* worn a bit more than to create an error condition on the volume.
*
* Set the level to the maximum value and add to the un-even wear count
* to keep track of the number of times this has happened.
*/
level = 15;
dev->uneven_wearcount++;
}
bits = gWearLevelToBitMap4[level];
if (block & 0x01)
{
/* Use the upper nibble */
dev->wearstatus[block >> SMART_WEAR_BIT_DIVIDE] &= 0x0F;
dev->wearstatus[block >> SMART_WEAR_BIT_DIVIDE] |= bits << 4;
}
else
{
/* Use the lower nibble */
dev->wearstatus[block >> SMART_WEAR_BIT_DIVIDE] &= 0xF0;
dev->wearstatus[block >> SMART_WEAR_BIT_DIVIDE] |= bits;
}
/* Mark wear bits as dirty */
dev->wearflags |= SMART_WEARFLAGS_WRITE_NEEDED;
/* Test if min / max need to be updated */
if (oldlevel + 1 == level)
{
/* Test if max needs to be updated */
if (level > dev->maxwearlevel)
{
dev->maxwearlevel = level;
}
/* Test if this was the min level. If it was, then
we need to rescan for min. */
if (oldlevel == dev->minwearlevel)
{
smart_find_wear_minmax(dev);
if (oldlevel != dev->minwearlevel)
fvdbg("##### New min wear level = %d\n", dev->minwearlevel);
}
}
return 0;
}
#endif
/****************************************************************************
* Name: smart_scan
*
* Description: Performs a scan of the MTD device searching for format
* information and fills in logical sector mapping, freesector
* count, etc.
*
****************************************************************************/
static int smart_scan(FAR struct smart_struct_s *dev)
{
int sector;
int ret;
uint16_t totalsectors;
uint16_t sectorsize, prerelease;
uint16_t logicalsector;
uint16_t loser;
uint32_t readaddress;
uint32_t offset;
uint16_t seq1;
uint16_t seq2;
struct smart_sect_header_s header;
#ifdef CONFIG_MTD_SMART_MINIMIZE_RAM
int dupsector;
uint16_t duplogsector;
#endif
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
int x;
char devname[22];
FAR struct smart_multiroot_device_s *rootdirdev;
#endif
fvdbg("Entry\n");
/* Find the sector size on the volume by reading headers from
* sectors of decreasing size. On a formatted volume, the sector
* size is saved in the header status byte of seach sector, so
* by starting with the largest supported sector size and
* decreasing from there, we will be sure to find data that is
* a header and not sector data.
*/
sectorsize = 0xFFFF;
offset = 16384;
while (sectorsize == 0xFFFF)
{
readaddress = 0;
while (readaddress < dev->erasesize * dev->geo.neraseblocks)
{
/* Read the next sector from the device */
ret = MTD_READ(dev->mtd, 0, sizeof(struct smart_sect_header_s),
(FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
goto err_out;
}
if (header.status != CONFIG_SMARTFS_ERASEDSTATE)
{
sectorsize = (header.status & SMART_STATUS_SIZEBITS) << 7;
break;
}
readaddress += offset;
}
offset >>= 1;
if (offset < 256 && sectorsize == 0xFFFF)
{
sectorsize = CONFIG_MTD_SMART_SECTOR_SIZE;
}
}
/* Now set the sectorsize and other sectorsize derived variables */
ret = smart_setsectorsize(dev, sectorsize);
if (ret != OK)
{
goto err_out;
}
/* Initialize the device variables */
totalsectors = dev->totalsectors;
dev->formatstatus = SMART_FMT_STAT_NOFMT;
dev->freesectors = dev->availSectPerBlk * dev->geo.neraseblocks;
dev->releasesectors = 0;
/* Initialize the freecount and releasecount arrays */
for (sector = 0; sector < dev->neraseblocks; sector++)
{
if (sector == dev->neraseblocks - 1 && dev->totalsectors == 65534)
{
prerelease = 2;
}
else
{
prerelease = 0;
}
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_set_count(dev, dev->freecount, sector, dev->availSectPerBlk - prerelease);
smart_set_count(dev, dev->releasecount, sector, prerelease);
#else
dev->freecount[sector] = dev->availSectPerBlk - prerelease;
dev->releasecount[sector] = prerelease;
#endif
}
/* Initialize the sector map */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
for (sector = 0; sector < totalsectors; sector++)
{
dev->sMap[sector] = -1;
}
#else
/* Clear all logical sector used bits */
memset(dev->sBitMap, 0, (dev->totalsectors + 7) >> 3);
#endif
/* Now scan the MTD device */
for (sector = 0; sector < totalsectors; sector++)
{
fvdbg("Scan sector %d\n", sector);
/* Calculate the read address for this sector */
readaddress = sector * dev->mtdBlksPerSector * dev->geo.blocksize;
/* Read the header for this sector */
ret = MTD_READ(dev->mtd, readaddress, sizeof(struct smart_sect_header_s),
(FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
goto err_out;
}
/* Get the logical sector number for this physical sector */
logicalsector = *((FAR uint16_t *) header.logicalsector);
#if CONFIG_SMARTFS_ERASEDSTATE == 0x00
if (logicalsector == 0)
{
logicalsector = -1;
}
#endif
/* Test if this sector has been committed */
if ((header.status & SMART_STATUS_COMMITTED) ==
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_COMMITTED))
{
continue;
}
/* This block is commited, therefore not free. Update the
* erase block's freecount.
*/
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_add_count(dev, dev->freecount, sector / dev->sectorsPerBlk, -1);
#else
dev->freecount[sector / dev->sectorsPerBlk]--;
#endif
dev->freesectors--;
/* Test if this sector has been release and if it has,
* update the erase block's releasecount.
*/
if ((header.status & SMART_STATUS_RELEASED) !=
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_RELEASED))
{
/* Keep track of the total number of released sectors and
* released sectors per erase block.
*/
dev->releasesectors++;
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_add_count(dev, dev->releasecount, sector / dev->sectorsPerBlk, 1);
#else
dev->releasecount[sector / dev->sectorsPerBlk]++;
#endif
continue;
}
if ((header.status & SMART_STATUS_VERBITS) != SMART_STATUS_VERSION)
{
continue;
}
/* Validate the logical sector number is in bounds */
if (logicalsector >= totalsectors)
{
/* Error in logical sector read from the MTD device */
fdbg("Invalid logical sector %d at physical %d.\n",
logicalsector, sector);
continue;
}
/* If this is logical sector zero, then read in the signature
* information to validate the format signature.
*/
if (logicalsector == 0)
{
/* Read the sector data */
ret = MTD_READ(dev->mtd, readaddress, 32,
(FAR uint8_t*) dev->rwbuffer);
if (ret != 32)
{
fdbg("Error reading physical sector %d.\n", sector);
goto err_out;
}
/* Validate the format signature */
if (dev->rwbuffer[SMART_FMT_POS1] != SMART_FMT_SIG1 ||
dev->rwbuffer[SMART_FMT_POS2] != SMART_FMT_SIG2 ||
dev->rwbuffer[SMART_FMT_POS3] != SMART_FMT_SIG3 ||
dev->rwbuffer[SMART_FMT_POS4] != SMART_FMT_SIG4)
{
/* Invalid signature on a sector claiming to be sector 0!
* What should we do? Release it?*/
continue;
}
/* Mark the volume as formatted and set the sector size */
dev->formatstatus = SMART_FMT_STAT_FORMATTED;
dev->namesize = dev->rwbuffer[SMART_FMT_NAMESIZE_POS];
dev->formatversion = dev->rwbuffer[SMART_FMT_VERSION_POS];
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
dev->rootdirentries = dev->rwbuffer[SMART_FMT_ROOTDIRS_POS];
/* If rootdirentries is greater than 1, then we need to register
* additional block devices.
*/
for (x = 1; x < dev->rootdirentries; x++)
{
if (dev->partname[0] != '\0')
{
snprintf(dev->rwbuffer, sizeof(devname), "/dev/smart%d%sd%d",
dev->minor, dev->partname, x+1);
}
else
{
snprintf(devname, sizeof(devname), "/dev/smart%dd%d", dev->minor,
x + 1);
}
/* Inode private data is a reference to a struct containing
* the SMART device structure and the root directory number.
*/
rootdirdev = (struct smart_multiroot_device_s*) smart_malloc(dev,
sizeof(*rootdirdev), "Root Dir");
if (rootdirdev == NULL)
{
fdbg("Memory alloc failed\n");
ret = -ENOMEM;
goto err_out;
}
/* Populate the rootdirdev */
rootdirdev->dev = dev;
rootdirdev->rootdirnum = x;
ret = register_blockdriver(dev->rwbuffer, &g_bops, 0, rootdirdev);
/* Inode private data is a reference to the SMART device structure */
ret = register_blockdriver(devname, &g_bops, 0, rootdirdev);
}
#endif
}
/* Test for duplicate logical sectors on the device */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
if (dev->sMap[logicalsector] != 0xFFFF)
#else
if (dev->sBitMap[logicalsector >> 3] & (1 << (logicalsector & 0x07)))
#endif
{
/* Uh-oh, we found more than 1 physical sector claiming to be
* the same logical sector. Use the sequence number information
* to resolve who wins.
*/
#if SMART_STATUS_VERSION == 1
if (header.status & SMART_STATUS_CRC)
{
seq2 = header.seq;
}
else
{
seq2 = *((FAR uint16_t *) &header.seq);
}
#else
seq2 = header.seq;
#endif
/* We must re-read the 1st physical sector to get it's seq number */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
readaddress = dev->sMap[logicalsector] * dev->mtdBlksPerSector * dev->geo.blocksize;
#else
/* For minimize RAM, we have to rescan to find the 1st sector claiming to
* be this logical sector.
*/
for (dupsector = 0; dupsector < sector; dupsector++)
{
/* Calculate the read address for this sector */
readaddress = dupsector * dev->mtdBlksPerSector * dev->geo.blocksize;
/* Read the header for this sector */
ret = MTD_READ(dev->mtd, readaddress, sizeof(struct smart_sect_header_s),
(FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
goto err_out;
}
/* Get the logical sector number for this physical sector */
duplogsector = *((FAR uint16_t *) header.logicalsector);
#if CONFIG_SMARTFS_ERASEDSTATE == 0x00
if (duplogsector == 0)
{
duplogsector = -1;
}
#endif
/* Test if this sector has been committed */
if ((header.status & SMART_STATUS_COMMITTED) ==
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_COMMITTED))
{
continue;
}
/* Test if this sector has been release and skip it if it has */
if ((header.status & SMART_STATUS_RELEASED) !=
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_RELEASED))
{
continue;
}
if ((header.status & SMART_STATUS_VERBITS) != SMART_STATUS_VERSION)
{
continue;
}
/* Now compare if this logical sector matches the current sector */
if (duplogsector == logicalsector)
{
break;
}
}
#endif
ret = MTD_READ(dev->mtd, readaddress, sizeof(struct smart_sect_header_s),
(FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
goto err_out;
}
#if SMART_STATUS_VERSION == 1
if (header.status & SMART_STATUS_CRC)
{
seq1 = header.seq;
}
else
{
seq1 = *((FAR uint16_t *) &header.seq);
}
#else
seq1 = header.seq;
#endif
/* Now determine who wins */
if ((seq1 > 0xFFF0 && seq2 < 10) || seq2 > seq1)
{
/* Seq 2 is the winner ... bigger or it wrapped */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
loser = dev->sMap[logicalsector];
dev->sMap[logicalsector] = sector;
#else
loser = dupsector;
#endif
}
else
{
/* We keep the original mapping and seq2 is the loser */
loser = sector;
}
/* Now release the loser sector */
readaddress = loser * dev->mtdBlksPerSector * dev->geo.blocksize;
ret = MTD_READ(dev->mtd, readaddress, sizeof(struct smart_sect_header_s),
(FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
goto err_out;
}
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
header.status &= ~SMART_STATUS_RELEASED;
#else
header.status |= SMART_STATUS_RELEASED;
#endif
offset = readaddress + offsetof(struct smart_sect_header_s, status);
ret = smart_bytewrite(dev, offset, 1, &header.status);
if (ret < 0)
{
fdbg("Error %d releasing duplicate sector\n", -ret);
goto err_out;
}
}
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
/* Update the logical to physical sector map */
dev->sMap[logicalsector] = sector;
#else
/* Mark the logical sector as used in the bitmap */
dev->sBitMap[logicalsector >> 3] |= 1 << (logicalsector & 0x07);
if (logicalsector < SMART_FIRST_ALLOC_SECTOR)
{
smart_add_sector_to_cache(dev, logicalsector, sector, __LINE__ );
}
#endif
}
#if defined (CONFIG_MTD_SMART_WEAR_LEVEL) && (SMART_STATUS_VERSION == 1)
#ifdef CONFIG_MTD_SMART_CONVERT_WEAR_FORMAT
/* We need to check if we are converting an older format with incorrect
* wear leveling data in sector zero to the new format. The old format
* put all zeros in the wear level bit locations, but the new (better)
* way is to leave them 0xFF.
*/
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
sector = dev->sMap[0];
#else
sector = smart_cache_lookup(dev, 0);
#endif
/* Validate the sector is valid ... may be an unformatted device */
if (sector != 0xFFFF)
{
/* Read the sector data */
ret = MTD_BREAD(dev->mtd, sector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (uint8_t *) dev->rwbuffer);
if (ret != dev->mtdBlksPerSector)
{
fdbg("Error reading physical sector %d.\n", sector);
goto err_out;
}
/* Check for old format wear leveling */
if (dev->rwbuffer[SMART_WEAR_LEVEL_FORMAT_SIG] == 0)
{
/* Old format detected. We must relocate sector zero and fill it in with 0xFF */
uint16_t newsector = smart_findfreephyssector(dev, FALSE);
if (newsector == 0xFFFF)
{
/* Unable to find a free sector!!! */
fdbg("Can't find a free sector for relocation\n");
ret = -ENOSPC;
goto err_out;
}
memset(&dev->rwbuffer[SMART_WEAR_LEVEL_FORMAT_SIG], 0xFF,
dev->mtdBlksPerSector * dev->geo.blocksize -
SMART_WEAR_LEVEL_FORMAT_SIG);
smart_relocate_sector(dev, sector, newsector);
/* Update the free and release sector counts */
dev->freesectors--;
dev->releasesectors++;
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap[0] = newsector;
dev->freecount[newsector / dev->sectorsPerBlk]--;
dev->releasecount[sector / dev->sectorsPerBlk]++;
#else
smart_update_cache(dev, 0, newsector);
smart_add_count(dev, dev->freecount, newsector / dev->sectorsPerBlk, -1);
smart_add_count(dev, dev->releasecount, sector / dev->sectorsPerBlk, 1);
#endif
}
}
#endif /* CONFIG_MTD_SMART_CONVERT_WEAR_FORMAT */
#endif /* CONFIG_MTD_SMART_WEAR_LEVEL && SMART_STATUS_VERSION == 1 */
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
/* Read the wear leveling status bits */
smart_read_wearstatus(dev);
#endif
fdbg("SMART Scan\n");
fdbg(" Erase size: %10d\n", dev->sectorsPerBlk * dev->sectorsize);
fdbg(" Erase count: %10d\n", dev->neraseblocks);
fdbg(" Sect/block: %10d\n", dev->sectorsPerBlk);
fdbg(" MTD Blk/Sect: %10d\n", dev->mtdBlksPerSector);
#ifdef CONFIG_MTD_SMART_ALLOC_DEBUG
fdbg(" Allocations:\n");
for (sector = 0; sector < SMART_MAX_ALLOCS; sector++)
{
if (dev->alloc[sector].ptr != NULL)
{
fdbg(" %s: %d\n", dev->alloc[sector].name, dev->alloc[sector].size);
}
}
#endif
ret = OK;
err_out:
return ret;
}
/****************************************************************************
* Name: smart_getformat
*
* Description: Populates the SMART format structure based on the format
* information for the inode.
*
****************************************************************************/
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
static inline int smart_getformat(FAR struct smart_struct_s *dev,
FAR struct smart_format_s *fmt,
uint8_t rootdirnum)
#else
static inline int smart_getformat(FAR struct smart_struct_s *dev,
FAR struct smart_format_s *fmt)
#endif
{
int ret;
fvdbg("Entry\n");
DEBUGASSERT(fmt);
/* Test if we know the format status or not. If we don't know the
* status, then we must perform a scan of the device to search
* for the format marker
*/
if (dev->formatstatus != SMART_FMT_STAT_FORMATTED)
{
/* Perform the scan */
ret = smart_scan(dev);
if (ret != OK)
{
goto err_out;
}
}
/* Now fill in the structure */
if (dev->formatstatus == SMART_FMT_STAT_FORMATTED)
{
fmt->flags = SMART_FMT_ISFORMATTED;
}
else
{
fmt->flags = 0;
}
fmt->sectorsize = dev->sectorsize;
fmt->availbytes = dev->sectorsize - sizeof(struct smart_sect_header_s);
fmt->nsectors = dev->totalsectors;
fmt->nfreesectors = dev->freesectors;
fmt->namesize = dev->namesize;
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
fmt->nrootdirentries = dev->rootdirentries;
fmt->rootdirnum = rootdirnum;
#endif
/* Add the released sectors to the reported free sector count */
fmt->nfreesectors += dev->releasesectors;
/* Subtract the reserved sector count */
fmt->nfreesectors -= dev->sectorsPerBlk + 4;
ret = OK;
err_out:
return ret;
}
/****************************************************************************
* Name: smart_erase_block_if_empty
*
* Description: Tests the specified erase block if it contains all free or
* released sectors and erases it.
*
****************************************************************************/
static void smart_erase_block_if_empty(FAR struct smart_struct_s *dev,
uint16_t block, uint8_t forceerase)
{
uint16_t freecount, releasecount, prerelease;
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
releasecount = smart_get_count(dev, dev->releasecount, block);
freecount = smart_get_count(dev, dev->freecount, block);
#else
releasecount = dev->releasecount[block];
freecount = dev->freecount[block];
#endif
if ((freecount + releasecount == dev->availSectPerBlk && freecount < 1) || forceerase)
{
/* Erase the block */
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
dev->unusedsectors += freecount;
dev->blockerases++;
#endif
MTD_ERASE(dev->mtd, block, 1);
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
if (dev->erasecounts)
{
dev->erasecounts[block]++;
}
#endif
/* If wear leveling enabled, then we must add one to the wear status */
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
smart_set_wear_level(dev, block, smart_get_wear_level(dev, block) + 1);
#endif
/* If we have a device with 65534 sectors, then disallow the last two
* physical sector if this is the last erase block on the device.
*/
if (block == dev->geo.neraseblocks - 1 && dev->totalsectors == 65534)
{
prerelease = 2;
}
else
{
prerelease = 0;
}
dev->freesectors += dev->availSectPerBlk - prerelease - freecount;
dev->releasesectors -= releasecount - prerelease;
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_set_count(dev, dev->releasecount, block, prerelease);
smart_set_count(dev, dev->freecount, block, dev->availSectPerBlk-prerelease);
#else
dev->releasecount[block] = prerelease;
dev->freecount[block] = dev->availSectPerBlk - prerelease;
#endif /* CONFIG_MTD_SMART_PACK_COUNTS */
/* Now that we have erased this block and updated the release / free counts,
* if we are in WEAR LEVELING enabled mode, we must check if this erase block's
* wear level has reached the threshold to warrant moving a minimum wear level
* block's data into it (i.e. relocating static data to this block so it will
* be worn less).
*/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
if (!forceerase)
{
smart_relocate_static_data(dev, block);
}
#endif
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...while eraseing block %d\n", block);
}
#endif
}
}
/****************************************************************************
* Name: smart_relocate_static_data
*
* Description: Tests if the specified block has reached the wear threshold
* for static data relocation and if it has, relocates a less
* worn block to it.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
static int smart_relocate_static_data(FAR struct smart_struct_s *dev, uint16_t block)
{
uint16_t freecount, x, sector, minblock;
uint16_t nextsector, newsector, mincount;
int ret;
FAR struct smart_sect_header_s *header;
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
FAR struct smart_allocsector_s *allocsector;
#endif
/* Now that we have erased this block and updated the release / free counts,
* if we are in WEAR LEVELING enabled mode, we must check if this erase block's
* wear level has reached the threshold to warrant moving a minimum wear level
* block's data into it (i.e. relocating static data to this block so it will
* be worn less).
*/
ret = OK;
header = (FAR struct smart_sect_header_s *) dev->rwbuffer;
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...about to relocate static data %d\n", block);
}
#endif
if (smart_get_wear_level(dev, block) >= SMART_WEAR_FULL_RELOCATE_THRESHOLD)
{
/* Okay, this block is getting too worn. Move a minimum wear level
* block to it in it's entirity.
*/
/* Scan all erase blocks (or until we find a minimum wear level block
* with no free + released blocks.
*/
freecount = dev->sectorsPerBlk + 1;
minblock = dev->geo.neraseblocks;
mincount = 0;
for (x = 0; x < dev->geo.neraseblocks; x++)
{
if (smart_get_wear_level(dev, x) == dev->minwearlevel)
{
/* Don't allow the format sector or directory sector to
* be moved into a worn block. First get the format and
* dir sectors.
*/
mincount++;
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
if (smart_get_count(dev, dev->releasecount, x) +
smart_get_count(dev, dev->freecount, x) < freecount)
{
freecount = smart_get_count(dev, dev->releasecount, x) +
smart_get_count(dev, dev->freecount, x);
minblock = x;
}
#else
if (dev->freecount[x] + dev->releasecount[x] < freecount)
{
freecount = dev->freecount[x] + dev->releasecount[x];
minblock = x;
}
#endif
/* Break if freecount reaches zero */
if (freecount == 0)
{
/* We found a minimum wear-level block with no free sectors.
* relocate this block to the more highly worn block.
*/
break;
}
}
}
/* Okay, now move block 'x' to block 'block' and erase block 'x' */
x = minblock;
/* We are resuing nextsector and newsector variables here simply as
* variables for displaying debug data. I have learned through my
* years of programming that this is a really good way to create
* spaghetti code, but I didn't want to add stack variables just
* for debug data, and I *know* these variables aren't being used
* yet.
*/
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
nextsector = smart_get_count(dev, dev->freecount, x);
newsector = smart_get_count(dev, dev->releasecount, x);
#else
nextsector = dev->freecount[x];
newsector = dev->releasecount[x];
#endif
fvdbg("Moving block %d, wear %d, free %d, released %d to block %d, wear %d\n",
x, smart_get_wear_level(dev, x),
nextsector, newsector,
block, smart_get_wear_level(dev, block));
nextsector = block * dev->sectorsPerBlk;
for (sector = x * dev->sectorsPerBlk; sector <
x * dev->sectorsPerBlk + dev->availSectPerBlk; sector++)
{
/* Read the next sector from this erase block */
ret = MTD_BREAD(dev->mtd, sector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
if (ret != dev->mtdBlksPerSector)
{
fdbg("Error reading sector %d\n", sector);
ret = -EIO;
goto errout;
}
/* Test if the block is in use */
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* Check if there is a temporary alloc for this physical sector */
allocsector = dev->allocsector;
while (allocsector)
{
if (allocsector->physical == sector)
{
break;
}
allocsector = allocsector->next;
}
/* If we found a temp allocation, just update the mapped physical
* location and move on to the next block ... there is no data to
* move yet.
*/
if (allocsector)
{
/* Get next sector from 'block' */
newsector = nextsector++;
if (newsector == 0xFFFF)
{
/* Unable to find a free sector!!! */
fdbg("Can't find a free sector for relocation\n");
ret = -ENOSPC;
goto errout;
}
/* Update the temporary allocation's physical sector */
allocsector->physical = newsector;
*((FAR uint16_t *) header->logicalsector) = allocsector->logical;
}
else
#endif
{
if (((header->status & SMART_STATUS_COMMITTED) ==
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_COMMITTED)) ||
((header->status & SMART_STATUS_RELEASED) !=
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_RELEASED)))
{
/* This sector doesn't have live data (free or released).
* just continue to the next sector and don't move it.
*/
continue;
}
/* Find a new sector where it can live, NOT in this erase block */
newsector = nextsector++;
/* Relocate the sector data */
if ((ret = smart_relocate_sector(dev, sector, newsector)) < 0)
{
goto errout;
}
}
dev->freesectors--;
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap[*((FAR uint16_t *) header->logicalsector)] = newsector;
#else
smart_update_cache(dev, *((FAR uint16_t *) header->logicalsector), newsector);
#endif
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_add_count(dev, dev->freecount, block, -1);
#else
dev->freecount[block]--;
#endif /* CONFIG_MTD_SMART_PACK_COUNTS */
}
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...about to erase static block %d\n", block);
}
#endif
/* Now erase the block we just relocated, force erasing it */
smart_erase_block_if_empty(dev, x, TRUE);
}
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...done erasing static block %d\n", block);
}
#endif
errout:
return ret;
}
#endif
/****************************************************************************
* Name: smart_calc_sector_crc
*
* Description: Calculate the CRC value for the sector data in the RW buffer
* based on the configured CRC size.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
static crc_t smart_calc_sector_crc(FAR struct smart_struct_s *dev)
{
crc_t crc = 0;
#ifdef CONFIG_SMART_CRC_8
/* Calculate CRC on data region of the sector */
crc = crc8((uint8_t *) &dev->rwbuffer[sizeof(struct smart_sect_header_s)],
dev->mtdBlksPerSector * dev->geo.blocksize - sizeof(struct smart_sect_header_s));
/* Add logical sector number and seq to the CRC calculation */
crc = crc8part((uint8_t *) dev->rwbuffer, 3, crc);
/* Add status to the CRC calculation */
crc = crc8part((uint8_t *) &dev->rwbuffer[offsetof(struct smart_sect_header_s,
status)], 1, crc);
#elif defined(CONFIG_SMART_CRC_16)
/* Calculate CRC on data region of the sector */
crc = crc16((uint8_t *) &dev->rwbuffer[sizeof(struct smart_sect_header_s)],
dev->mtdBlksPerSector * dev->geo.blocksize - sizeof(struct smart_sect_header_s));
/* Add logical sector number to the CRC calculation */
crc = crc16part((uint8_t *) dev->rwbuffer, 2, crc);
/* Add status and seq to the CRC calculation */
crc = crc16part((uint8_t *) &dev->rwbuffer[offsetof(struct smart_sect_header_s,
status)], 2, crc);
#elif defined(CONFIG_SMART_CRC_32)
/* Calculate CRC on data region of the sector */
crc = crc32((uint8_t *) &dev->rwbuffer[sizeof(struct smart_sect_header_s)],
dev->mtdBlksPerSector * dev->geo.blocksize - sizeof(struct smart_sect_header_s));
/* Add logical sector number, status and seq to the CRC calculation */
crc = crc32part((uint8_t *) dev->rwbuffer, 6, crc);
#else
#error "Unknown CRC size!"
#endif
return crc;
}
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
/****************************************************************************
* Name: smart_llformat
*
* Description: Performs a low-level format of the flash device. This
* involves erasing the device and writing a valid sector
* zero (logical) with proper format signature.
*
****************************************************************************/
#ifdef CONFIG_FS_WRITABLE
static inline int smart_llformat(FAR struct smart_struct_s *dev, unsigned long arg)
{
FAR struct smart_sect_header_s *sectorheader;
size_t wrcount;
int x;
int ret;
uint8_t sectsize, prerelease;
fvdbg("Entry\n");
smart_setsectorsize(dev, CONFIG_MTD_SMART_SECTOR_SIZE);
/* Check for invalid format */
if (dev->erasesize == 0)
{
if (dev->geo.erasesize == 0)
{
dev->erasesize = 262144;
}
else
{
dev->erasesize = dev->geo.erasesize;
}
dbg("ERROR: Invalid geometery ... Sectors per erase block must be 256 or less\n");
dbg(" Erase block size = %d\n", dev->erasesize);
dbg(" Sector size = %d\n", dev->sectorsize);
dbg(" Sectors/erase block = %d\n", dev->erasesize / dev->sectorsize);
return -EINVAL;
}
/* Erase the MTD device */
ret = MTD_IOCTL(dev->mtd, MTDIOC_BULKERASE, 0);
if (ret < 0)
{
return ret;
}
/* Now construct a logical sector zero header to write to the device. */
sectorheader = (FAR struct smart_sect_header_s *) dev->rwbuffer;
memset(dev->rwbuffer, CONFIG_SMARTFS_ERASEDSTATE, dev->sectorsize);
#if SMART_STATUS_VERSION == 1
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* CRC enabled. Using an 8-bit sequence number */
sectorheader->seq = 0;
#else
/* CRC not enabled. Using a 16-bit sequence number */
*((FAR uint16_t *) §orheader->seq) = 0;
#endif
#else /* SMART_STATUS_VERSION == 1 */
sectorheader->seq = 0;
#endif /* SMART_STATUS_VERSION == 1 */
/* Set the sector size of this sector */
sectsize = (CONFIG_MTD_SMART_SECTOR_SIZE >> 9) << 2;
/* Set the sector logical sector to zero and setup the header status */
#if ( CONFIG_SMARTFS_ERASEDSTATE == 0xFF )
*((FAR uint16_t *) sectorheader->logicalsector) = 0;
sectorheader->status = (uint8_t) ~(SMART_STATUS_COMMITTED | SMART_STATUS_VERBITS |
SMART_STATUS_SIZEBITS) | SMART_STATUS_VERSION |
sectsize;
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
sectorheader->status &= ~SMART_STATUS_CRC;
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
#else /* CONFIG_SMARTFS_ERASEDSTATE == 0xFF */
*((FAR uint16_t *) sectorheader->logicalsector) = 0xFFFF;
sectorheader->status = (uint8_t) (SMART_STATUS_COMMITTED | SMART_STATUS_VERSION |
sectsize);
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
sectorheader->status |= SMART_STATUS_CRC;
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
#endif /* CONFIG_SMARTFS_ERASEDSTATE == 0xFF */
/* Now add the format signature to the sector */
dev->rwbuffer[SMART_FMT_POS1] = SMART_FMT_SIG1;
dev->rwbuffer[SMART_FMT_POS2] = SMART_FMT_SIG2;
dev->rwbuffer[SMART_FMT_POS3] = SMART_FMT_SIG3;
dev->rwbuffer[SMART_FMT_POS4] = SMART_FMT_SIG4;
dev->rwbuffer[SMART_FMT_VERSION_POS] = SMART_FMT_VERSION;
dev->rwbuffer[SMART_FMT_NAMESIZE_POS] = CONFIG_SMARTFS_MAXNAMLEN;
/* Record the number of root directory entries we have */
dev->rwbuffer[SMART_FMT_ROOTDIRS_POS] = (uint8_t) arg;
#ifdef CONFIG_SMART_CRC_8
sectorheader->crc8 = smart_calc_sector_crc(dev);
#elif defined(CONFIG_SMART_CRC_16)
*((uint16_t *) sectorheader->crc16) = smart_calc_sector_crc(dev);
#elif defined(CONFIG_SMART_CRC_32)
*((uint32_t *) sectorheader->crc32) = smart_calc_sector_crc(dev);
#endif
/* Write the sector to the flash */
wrcount = MTD_BWRITE(dev->mtd, 0, dev->mtdBlksPerSector,
(FAR uint8_t *) dev->rwbuffer);
if (wrcount != dev->mtdBlksPerSector)
{
/* The block is not empty!! What to do? */
fdbg("Write block 0 failed: %d.\n", wrcount);
/* Unlock the mutex if we add one */
return -EIO;
}
/* Now initialize our internal control variables */
ret = smart_setsectorsize(dev, CONFIG_MTD_SMART_SECTOR_SIZE);
if (ret != OK)
{
return ret;
}
dev->formatstatus = SMART_FMT_STAT_UNKNOWN;
dev->freesectors = dev->availSectPerBlk * dev->geo.neraseblocks - 1;
dev->releasesectors = 0;
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
dev->uneven_wearcount = 0;
#endif
/* Initialize the released and free counts */
for (x = 0; x < dev->neraseblocks; x++)
{
/* Test for a geometry with 65536 sectors. We allow this, though
we never use the last two sectors in this mode.
*/
if (x == dev->neraseblocks && dev->totalsectors == 65534)
{
prerelease = 2;
}
else
{
prerelease = 0;
}
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_set_count(dev, dev->releasecount, x, prerelease);
smart_set_count(dev, dev->freecount, x, dev->availSectPerBlk-prerelease);
#else
dev->releasecount[x] = prerelease;
dev->freecount[x] = dev->availSectPerBlk-prerelease;
#endif
}
/* Account for the format sector */
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_set_count(dev, dev->freecount, 0, dev->availSectPerBlk - 1);
#else
dev->freecount[0]--;
#endif
/* Now initialize the logical to physical sector map */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap[0] = 0; /* Logical sector zero = physical sector 0 */
for (x = 1; x < dev->totalsectors; x++)
{
/* Mark all other logical sectors as non-existant */
dev->sMap[x] = -1;
}
#endif
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
/* Un-register any extra directory device entries */
for (x = 2; x < 8; x++)
{
snprintf(dev->rwbuffer, 18, "/dev/smart%dd%d", dev->minor, x);
unregister_blockdriver(dev->rwbuffer);
}
#endif
return OK;
}
#endif /* CONFIG_FS_WRITABLE */
/****************************************************************************
* Name: smart_relocate_sector
*
* Description: Relocates the specified sector to the new sector location.
*
****************************************************************************/
static int smart_relocate_sector(FAR struct smart_struct_s *dev,
uint16_t oldsector, uint16_t newsector)
{
int ret;
size_t offset;
FAR struct smart_sect_header_s *header;
uint8_t newstatus;
header = (FAR struct smart_sect_header_s *) dev->rwbuffer;
/* Increment the sequence number and clear the "commit" flag */
#if SMART_STATUS_VERSION == 1
if (header->status & SMART_STATUS_CRC)
{
#endif
/* Using 8-bit sequence */
header->seq++;
if (header->seq == 0xFF)
{
header->seq = 1;
}
#if SMART_STATUS_VERSION == 1
}
else
{
/* Using 16-bit sequence and no CRC */
(*((FAR uint16_t *) &header->seq))++;
if (*((FAR uint16_t *) &header->seq) == 0xFFFF)
{
*((FAR uint16_t *) &header->seq) = 1;
}
}
#endif
/* When CRC is enabled, we must pre-commit the sector and also
* calculate an updated CRC for the sector prior to writing
* since we changed the sequence number.
*/
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* First pre-commit the sector */
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
header->status &= ~(SMART_STATUS_COMMITTED | SMART_STATUS_CRC);
#else
header->status |= SMART_STATUS_COMMITTED | SMART_STATUS_CRC;
#endif
/* Now calculate the new CRC */
#ifdef CONFIG_SMART_CRC_8
header->crc8 = smart_calc_sector_crc(dev);
#elif defined(CONFIG_SMART_CRC_16)
*((uint16_t *) header->crc16) = smart_calc_sector_crc(dev);
#elif defined(CONFIG_SMART_CRC_32)
*((uint32_t *) header->crc32) = smart_calc_sector_crc(dev);
#endif
/* Write the data to the new physical sector location */
ret = MTD_BWRITE(dev->mtd, newsector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
#else /* CONFIG_MTD_SMART_ENABLE_CRC */
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
header->status |= SMART_STATUS_COMMITTED;
#else
header->status &= ~SMART_STATUS_COMMITTED;
#endif
/* Write the data to the new physical sector location */
ret = MTD_BWRITE(dev->mtd, newsector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
/* Commit the sector */
offset = newsector * dev->mtdBlksPerSector * dev->geo.blocksize +
offsetof(struct smart_sect_header_s, status);
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
newstatus = header->status & ~SMART_STATUS_COMMITTED;
#else
newstatus = header->status | SMART_STATUS_COMMITTED;
#endif
ret = smart_bytewrite(dev, offset, 1, &newstatus);
if (ret < 0)
{
fdbg("Error %d committing new sector %d\n" -ret, newsector);
goto errout;
}
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
/* Release the old physical sector */
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
newstatus = header->status & ~(SMART_STATUS_RELEASED | SMART_STATUS_COMMITTED);
#else
newstatus = header->status | SMART_STATUS_RELEASED | SMART_STATUS_COMMITTED;
#endif
offset = oldsector * dev->mtdBlksPerSector * dev->geo.blocksize +
offsetof(struct smart_sect_header_s, status);
ret = smart_bytewrite(dev, offset, 1, &newstatus);
if (ret < 0)
{
fdbg("Error %d releasing old sector %d\n" -ret, oldsector);
}
#ifndef CONFIG_MTD_SMART_ENABLE_CRC
errout:
#endif
return ret;
}
/****************************************************************************
* Name: smart_relocate_block
*
* Description: Relocates the specified MTD erase block by moving any
* active sectors to a different erase block and then erases
* the selected block.
*
****************************************************************************/
static int smart_relocate_block(FAR struct smart_struct_s *dev, uint16_t block)
{
uint16_t newsector, oldrelease;
int x;
int ret;
FAR struct smart_sect_header_s *header;
uint8_t prerelease;
uint16_t freecount;
#if defined(CONFIG_SMART_LOCAL_CHECKFREE) && defined(CONFIG_DEBUG_FS)
uint16_t releasecount;
#endif
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
FAR struct smart_allocsector_s *allocsector;
#endif
/* Perform collection on block with the most released sectors.
* First mark the block as having no free sectors so we don't
* try to move sectors into the block we are trying to erase.
*/
header = (FAR struct smart_sect_header_s *) dev->rwbuffer;
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...while relocating block %d, free=%d\n", block, dev->freesectors);
}
#endif
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
freecount = smart_get_count(dev, dev->freecount, block);
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
#if defined(CONFIG_SMART_LOCAL_CHECKFREE) && defined(CONFIG_DEBUG_FS)
releasecount = smart_get_count(dev, dev->releasecount, block);
#endif
#endif
/* Ensure we aren't relocating a block containing the only free sectors */
if (freecount >= dev->freesectors)
{
fdbg("Program bug! Relocating the only block (%d) with free sectors!\n", block);
ret = -EIO;
goto errout;
}
smart_set_count(dev, dev->freecount, block, 0);
#else /* CONFIG_MTD_SMART_PACK_COUNTS */
freecount = dev->freecount[block];
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
#if defined(CONFIG_SMART_LOCAL_CHECKFREE) && defined(CONFIG_DEBUG_FS)
releasecount = dev->releasecount[block];
#endif
#endif
dev->freecount[block] = 0;
#endif
/* Next move all live data in the block to a new home. */
for (x = block * dev->sectorsPerBlk; x <
block * dev->sectorsPerBlk + dev->availSectPerBlk; x++)
{
/* Read the next sector from this erase block */
ret = MTD_BREAD(dev->mtd, x * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
if (ret != dev->mtdBlksPerSector)
{
fdbg("Error reading sector %d\n", x);
ret = -EIO;
goto errout;
}
/* Test if the block is in use */
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* Check if there is a temporary alloc for this physical sector */
allocsector = dev->allocsector;
while (allocsector)
{
if (allocsector->physical == x)
break;
allocsector = allocsector->next;
}
/* If we found a temp allocation, just update the mapped physical
* location and move on to the next block ... there is no data to
* move yet.
*/
if (allocsector)
{
newsector = smart_findfreephyssector(dev, FALSE);
if (newsector == 0xFFFF)
{
/* Unable to find a free sector!!! */
fdbg("Can't find a free sector for relocation\n");
ret = -ENOSPC;
goto errout;
}
/* Update the temporary allocation's physical sector */
allocsector->physical = newsector;
*((FAR uint16_t *) header->logicalsector) = allocsector->logical;
}
else
#endif
{
if (((header->status & SMART_STATUS_COMMITTED) ==
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_COMMITTED)) ||
((header->status & SMART_STATUS_RELEASED) !=
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_RELEASED)))
{
/* This sector doesn't have live data (free or released).
* just continue to the next sector and don't move it.
*/
continue;
}
/* Find a new sector where it can live, NOT in this erase block */
newsector = smart_findfreephyssector(dev, FALSE);
if (newsector == 0xFFFF)
{
/* Unable to find a free sector!!! */
fdbg("Can't find a free sector for relocation\n");
ret = -ENOSPC;
goto errout;
}
/* Relocate the sector data */
if ((ret = smart_relocate_sector(dev, x, newsector)) < 0)
goto errout;
}
/* Update the variables */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap[*((FAR uint16_t *) header->logicalsector)] = newsector;
#else
smart_update_cache(dev, *((FAR uint16_t *) header->logicalsector), newsector);
#endif
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_add_count(dev, dev->freecount, newsector / dev->sectorsPerBlk, -1);
#else
dev->freecount[newsector / dev->sectorsPerBlk]--;
#endif
}
/* Now erase the erase block */
MTD_ERASE(dev->mtd, block, 1);
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
dev->unusedsectors += freecount;
dev->blockerases++;
#endif
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
if (dev->erasecounts)
{
dev->erasecounts[block]++;
}
#endif
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
/* Update the new wear level count */
smart_set_wear_level(dev, block, smart_get_wear_level(dev, block) + 1);
#endif
/* Update the free and release sectors for this erase block. */
if (x == dev->neraseblocks && dev->totalsectors == 65534)
{
/* We can't use the last two sectors on a 65536 sector device,
so "pre-release" them so they never get allocated.
*/
prerelease = 2;
}
else
{
prerelease = 0;
}
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
oldrelease = smart_get_count(dev, dev->releasecount, block);
dev->freesectors += oldrelease-prerelease;
dev->releasesectors -= oldrelease-prerelease;
smart_set_count(dev, dev->freecount, block, dev->availSectPerBlk-prerelease);
smart_set_count(dev, dev->releasecount, block, prerelease);
#else
oldrelease = dev->releasecount[block];
dev->freesectors += oldrelease-prerelease;
dev->releasesectors -= oldrelease-prerelease;
dev->freecount[block] = dev->availSectPerBlk-prerelease;
dev->releasecount[block] = prerelease;
#endif
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...while relocating block %d, free=%d, release=%d, oldrelease=%d\n", block, freecount, releasecount, oldrelease);
}
#endif
/* Test if this erase causes the block to reach the full relocate
* threshold requiring static data relocation.
*/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
smart_relocate_static_data(dev, block);
#endif
return OK;
errout:
/* Restore the block's freecount if error */
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_set_count(dev, dev->freecount, block, freecount);
#else
dev->freecount[block] = freecount;
#endif
return ret;
}
/****************************************************************************
* Name: smart_findfreephyssector
*
* Description: Finds a free physical sector based on free and released
* count logic, taking into account reserved sectors.
*
****************************************************************************/
static int smart_findfreephyssector(FAR struct smart_struct_s *dev,
uint8_t canrelocate)
{
uint16_t count, allocfreecount, allocblock;
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
uint16_t wornfreecount, wornblock;
uint8_t wearlevel, wornlevel;
uint8_t maxwearlevel;
#endif
uint16_t physicalsector;
uint16_t x, block;
uint32_t readaddr;
struct smart_sect_header_s header;
int ret;
/* Determine which erase block we should allocate the new
* sector from. This is based on the number of free sectors
* available in each erase block. */
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
retry:
#endif
allocfreecount = 0;
allocblock = 0xFFFF;
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
wornfreecount = 0;
wornblock = 0xFFFF;
wornlevel = 15;
maxwearlevel = 0;
#endif
physicalsector = 0xFFFF;
if (++dev->lastallocblock >= dev->neraseblocks)
{
dev->lastallocblock = 0;
}
block = dev->lastallocblock;
for (x = 0; x < dev->neraseblocks; x++)
{
/* Test if this block has more free blocks than the
* currently selected block
*/
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
count = smart_get_count(dev, dev->freecount, block);
#else
count = dev->freecount[block];
#endif
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
/* Keep track of the block with the max free sectors that is worn */
wearlevel = smart_get_wear_level(dev, block);
if (wearlevel >= SMART_WEAR_FULL_RELOCATE_THRESHOLD)
{
if (wearlevel > maxwearlevel && count > 0)
{
maxwearlevel = wearlevel;
}
if (count > wornfreecount || (count > 0 && wearlevel < wornlevel))
{
/* Keep track of this block. If there are only worn blocks with
* free sectors left, then we will use it.
*/
if (x < dev->neraseblocks - 1 || !wornfreecount)
{
wornfreecount = count;
wornblock = block;
wornlevel = wearlevel;
}
}
}
else
#endif
if (count > allocfreecount)
{
/* Assign this block to alloc from */
if (x < dev->neraseblocks - 1 || !allocfreecount)
{
allocblock = block;
allocfreecount = count;
}
}
if (++block >= dev->neraseblocks)
block = 0;
}
/* Check if we found an allocblock. */
if (allocblock == 0xFFFF)
{
/* No un-worn blocks with free sectors */
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
/* If we are allowed to relocate unworn blocks then do so now */
if (canrelocate && wornfreecount < (dev->sectorsPerBlk >> 2) && wornlevel == maxwearlevel)
{
/* Relocate up to 8 unworn blocks */
block = 0;
for (x = 0; x < 8; )
{
if (smart_get_wear_level(dev, block) < SMART_WEAR_FORCE_REORG_THRESHOLD)
{
if (smart_relocate_block(dev, block) < 0)
{
fdbg("Error relocating block while finding free phys sector\n");
return -1;
}
x++;
}
block++;
}
if (x > 0)
{
/* Disable relocate for retry */
canrelocate = FALSE;
goto retry;
}
}
else
{
dev->wearflags |= SMART_WEARFLAGS_FORCE_REORG;
}
/* Test if we found a worn block with free sectors */
if (wornblock != 0xFFFF)
{
allocblock = wornblock;
}
else
#endif
{
dbg("Program bug! Expected a free sector, free=%d\n", dev->freesectors);
for (x = 0; x < dev->neraseblocks; x++)
{
printf("%d ", dev->freecount[x]);
}
/* No free sectors found! Bug? */
return -1;
}
}
/* Now find a free physical sector within this selected
* erase block to allocate. */
for (x = allocblock * dev->sectorsPerBlk;
x < allocblock * dev->sectorsPerBlk + dev->availSectPerBlk; x++)
{
/* Check if this physical sector is available. */
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* First check if there is a temporary alloc in place */
FAR struct smart_allocsector_s* allocsect;
allocsect = dev->allocsector;
while (allocsect)
{
if (allocsect->physical == x)
break;
allocsect = allocsect->next;
}
/* If we found this physical sector above, then continue on
* to the next physical sector in this block ... this one has
* a temporary allocation assigned.
*/
if (allocsect)
{
continue;
}
#endif
/* Now check on the physical media */
readaddr = x * dev->mtdBlksPerSector * dev->geo.blocksize;
ret = MTD_READ(dev->mtd, readaddr, sizeof(struct smart_sect_header_s),
(FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
fdbg("Error reading phys sector %d\n", physicalsector);
return -1;
}
if ((*((FAR uint16_t *) header.logicalsector) == 0xFFFF) &&
#if SMART_STATUS_VERSION == 1
(*((FAR uint16_t *) &header.seq) == 0xFFFF) &&
#else
(header.seq == CONFIG_SMARTFS_ERASEDSTATE) &&
#endif
((header.status & SMART_STATUS_COMMITTED) ==
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_COMMITTED)))
{
physicalsector = x;
dev->lastallocblock = allocblock;
break;
}
}
if (physicalsector == 0xFFFF)
{
dbg("Program bug! Expected a free sector\n");
}
if (physicalsector >= dev->totalsectors)
{
dbg("Program bug! Selected sector too big!!!\n");
}
return physicalsector;
}
/****************************************************************************
* Name: smart_garbagecollect
*
* Description: Performs garbage collection if needed. This is determined
* by the count of released sectors relative to free and
* total sectors.
*
****************************************************************************/
#ifdef CONFIG_FS_WRITABLE
static int smart_garbagecollect(FAR struct smart_struct_s *dev)
{
uint16_t collectblock;
uint16_t releasemax;
bool collect = TRUE;
int x;
int ret;
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
uint8_t count;
#endif
while (collect)
{
collect = FALSE;
/* Test if the released sectors count is greater than the
* free sectors. If it is, then we will do garbage collection.
*/
if (dev->releasesectors > dev->freesectors && dev->freesectors <
(dev->totalsectors >> 5))
{
collect = TRUE;
}
/* Test if we have more reached our reserved free sector limit */
if (dev->freesectors <= (dev->sectorsPerBlk << 0) + 4)
{
collect = TRUE;
}
/* Test if we need to garbage collect */
if (collect)
{
/* Find the block with the most released sectors */
collectblock = 0xFFFF;
releasemax = 0;
for (x = 0; x < dev->neraseblocks; x++)
{
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
/* Don't collect blocks that have been worn completely */
if (smart_get_wear_level(dev, x) >= SMART_WEAR_REORG_THRESHOLD)
{
continue;
}
#endif
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
count = smart_get_count(dev, dev->releasecount, x);
if (count > releasemax)
{
releasemax = count;
collectblock = x;
}
#else
if (dev->releasecount[x] > releasemax)
{
releasemax = dev->releasecount[x];
collectblock = x;
}
#endif
}
//releasemax = smart_get_count(dev, dev->releasecount, collectblock);
if (collectblock == 0xFFFF)
{
/* Need to collect, but no sectors with released blocks! */
ret = -ENOSPC;
goto errout;
}
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...before collecting block %d\n", collectblock);
}
#endif
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
fvdbg("Collecting block %d, free=%d released=%d, totalfree=%d, totalrelease=%d\n",
collectblock, smart_get_count(dev, dev->freecount, collectblock),
smart_get_count(dev, dev->releasecount, collectblock), dev->freesectors, dev->releasesectors);
#else
fvdbg("Collecting block %d, free=%d released=%d\n",
collectblock, dev->freecount[collectblock],
dev->releasecount[collectblock]);
#endif
/* Relocate the active data in the collection block */
ret = smart_relocate_block(dev, collectblock);
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
if (smart_checkfree(dev, __LINE__) != OK)
{
fdbg(" ...while collecting block %d\n", collectblock);
}
#endif
if (ret != OK)
{
goto errout;
}
}
}
return OK;
errout:
return ret;
}
#endif /* CONFIG_FS_WRITABLE */
/****************************************************************************
* Name: smart_write_wearstatus
*
* Description: Writes the wear leveling status bits to sector zero (and
* possibly others if it doesn't fit) such that is is persisted
* across OS reboots.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
static int smart_write_wearstatus(struct smart_struct_s *dev)
{
uint16_t sector;
uint16_t remaining, towrite;
struct smart_read_write_s req;
int ret;
uint8_t buffer[8], write_buffer = 0;
sector = 0;
remaining = dev->geo.neraseblocks >> 1;
memset(buffer, 0xFF, sizeof(buffer));
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
if (dev->blockerases > 0)
{
*((uint32_t *) buffer) = dev->blockerases;
write_buffer = 1;
}
#endif
/* Write the uneven wear count just prior to the wear bits */
if (dev->uneven_wearcount != 0)
{
*((uint32_t *) &buffer[4]) = dev->uneven_wearcount;
write_buffer = 1;
}
/* Test if we need to write either total block erase count or
uneven wearcount (or both)
*/
if (write_buffer)
{
req.logsector = sector;
req.offset = SMARTFS_FMT_WEAR_POS - 8;
req.count = sizeof(buffer);
req.buffer = buffer;
ret = smart_writesector(dev, (unsigned long) &req);
if (ret != OK)
{
goto errout;
}
}
/* Write all wear level bits to logical sector zero, one, two */
while (remaining)
{
/* Calculate the number of bytes to write to this sector */
towrite = remaining;
if (towrite > dev->sectorsize - SMARTFS_FMT_WEAR_POS)
{
towrite = dev->sectorsize - SMARTFS_FMT_WEAR_POS;
}
/* Setup the sector write request (we are our own client) */
req.logsector = sector;
req.offset = SMARTFS_FMT_WEAR_POS;
req.count = towrite;
req.buffer = &dev->wearstatus[(dev->geo.neraseblocks >> SMART_WEAR_BIT_DIVIDE) -
remaining];
/* Write the sector */
ret = smart_writesector(dev, (unsigned long) &req);
if (ret != OK)
{
goto errout;
}
/* Decrement the remaining count */
remaining -= towrite;
if (remaining)
{
/* Data doesn't fit in a single sector. Use the reserved sectors */
sector++;
if (sector >= SMART_FIRST_DIR_SECTOR)
{
/* Error, wear status bit too large! */
fdbg("Invalid geometry - wear level status too large\n");
ret = -EINVAL;
goto errout;
}
}
}
/* Now clear the NEEDS_WRITE wear status bit */
dev->wearflags &= ~SMART_WEARFLAGS_WRITE_NEEDED;
ret = OK;
errout:
return ret;
}
#endif
/****************************************************************************
* Name: smart_read_wearstatus
*
* Description: Reads the wear leveling status bits from sector zero (and
* possibly others if it doesn't fit) such that is is persisted
* across OS reboots.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
static inline int smart_read_wearstatus(FAR struct smart_struct_s *dev)
{
uint16_t sector;
uint16_t remaining, toread;
struct smart_read_write_s req;
int ret;
uint8_t buffer[8];
/* Prepare to read the total block erases and uneven wearcount values */
sector = 0;
req.logsector = sector;
req.offset = SMARTFS_FMT_WEAR_POS - 8;
req.count = sizeof(buffer);
req.buffer = buffer;
ret = smart_readsector(dev, (unsigned long) &req);
if (ret != sizeof(buffer))
{
goto errout;
}
/* Get the uneven wearcount value */
dev->uneven_wearcount = *((uint32_t *) &buffer[4]);
/* Check for erased state */
#if ( CONFIG_SMARTFS_ERASEDSTATE == 0xFF )
if (dev->uneven_wearcount == 0xFFFFFFFF)
{
dev->uneven_wearcount = 0;
}
#endif
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
/* Get the block erases count */
dev->blockerases = *((uint32_t *) buffer);
#if ( CONFIG_SMARTFS_ERASEDSTATE == 0xFF )
if (dev->blockerases == 0xFFFFFFFF)
{
dev->blockerases = 0;
}
#endif
#endif
/* Read all wear level bits from the flash */
remaining = dev->geo.neraseblocks >> 1;
while (remaining)
{
/* Calculate number of bytes to read from this sector */
toread = remaining;
if (toread > dev->sectorsize - SMARTFS_FMT_WEAR_POS)
{
toread = dev->sectorsize - SMARTFS_FMT_WEAR_POS;
}
/* Setup the sector read request (we are our own client) */
req.logsector = sector;
req.offset = SMARTFS_FMT_WEAR_POS;
req.count = toread;
req.buffer = &dev->wearstatus[(dev->geo.neraseblocks >> SMART_WEAR_BIT_DIVIDE) -
remaining];
/* Read the sector */
ret = smart_readsector(dev, (unsigned long) &req);
if (ret != toread)
{
goto errout;
}
/* Decrement the remaining count */
remaining -= toread;
if (remaining)
{
/* Data doesn't fit in a single sector. Use the reserved sectors */
sector++;
if (sector >= SMART_FIRST_DIR_SECTOR)
{
/* Error, wear status bit too large! */
fdbg("Invalid geometry - wear level status too large\n");
ret = -EINVAL;
goto errout;
}
}
}
/* Now interrogate the status bits */
smart_find_wear_minmax(dev);
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
/* Set the erase counts equal to the wear levels */
for (sector = 0; sector < dev->geo.neraseblocks; sector++)
{
dev->erasecounts[sector] = smart_get_wear_level(dev, sector);
}
#endif
ret = OK;
errout:
return ret;
}
#endif
/****************************************************************************
* Name: smart_write_alloc_sector
*
* Description: Writes a newly allocated sector's header to the RW buffer
* and updates sector mapping variables. If CRC isn't enabled
* it also writes the header to the device.
*
****************************************************************************/
#ifdef CONFIG_FS_WRITABLE
static int smart_write_alloc_sector(FAR struct smart_struct_s *dev,
uint16_t logical, uint16_t physical)
{
int ret = 1;
uint8_t sectsize;
FAR struct smart_sect_header_s *header;
memset(dev->rwbuffer, CONFIG_SMARTFS_ERASEDSTATE, dev->sectorsize);
header = (FAR struct smart_sect_header_s *) dev->rwbuffer;
*((FAR uint16_t *) header->logicalsector) = logical;
#if SMART_STATUS_VERSION == 1
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
header->seq = 0;
#else
*((FAR uint16_t *) &header->crc8) = 0;
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
#else
header->seq = 0;
#endif
sectsize = dev->sectorsize >> 7;
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
header->status = ~(SMART_STATUS_COMMITTED | SMART_STATUS_SIZEBITS |
SMART_STATUS_VERBITS) | SMART_STATUS_VERSION | sectsize;
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
header->status &= ~SMART_STATUS_CRC;
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
#else
header->status = SMART_STATUS_COMMITTED | SMART_STATUS_VERSION | sectsize;
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
header->status |= SMART_STATUS_CRC;
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
#endif
/* Write the header to the physical sector location */
#ifndef CONFIG_MTD_SMART_ENABLE_CRC
fvdbg("Write MTD block %d\n", physical * dev->mtdBlksPerSector);
ret = MTD_BWRITE(dev->mtd, physical * dev->mtdBlksPerSector, 1,
(FAR uint8_t *) dev->rwbuffer);
if (ret != 1)
{
/* The block is not empty!! What to do? */
fdbg("Write block %d failed: %d.\n", physical *
dev->mtdBlksPerSector, ret);
/* Unlock the mutex if we add one */
return -EIO;
}
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
return ret;
}
#endif
/****************************************************************************
* Name: smart_validate_crc
*
* Description: Validates the CRC data in the sector's header against the
* data in the sector. Assumes the entire sector has been
* read into the RW buffer already.
*
****************************************************************************/
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
static int smart_validate_crc(FAR struct smart_struct_s *dev)
{
crc_t crc;
FAR struct smart_sect_header_s *header;
/* Calculate CRC on data region of the sector */
crc = smart_calc_sector_crc(dev);
header = (FAR struct smart_sect_header_s *) dev->rwbuffer;
#ifdef CONFIG_SMART_CRC_8
/* Test 8-bit CRC */
if (crc != header->crc8)
{
return -EIO;
}
#elif defined(CONFIG_SMART_CRC_16)
/* Test 16-bit CRC */
if (crc != *((uint16_t *) header->crc16))
{
return -EIO;
}
#elif defined(CONFIG_SMART_CRC_32)
if (crc != *((uint32_t *) header->crc32))
{
return -EIO;
}
#endif
/* CRC checkout out okay */
return OK;
}
#endif
/****************************************************************************
* Name: smart_writesector
*
* Description: Writes data to the specified logical sector. The sector
* should have already been allocated prior to the write. If
* the logical sector already has data on the device, it will
* be released and a new physical sector will be created and
* mapped to the logical sector.
*
****************************************************************************/
#ifdef CONFIG_FS_WRITABLE
static int smart_writesector(FAR struct smart_struct_s *dev,
unsigned long arg)
{
int ret;
bool needsrelocate = FALSE;
uint32_t mtdblock;
uint16_t physsector, oldphyssector, block;
FAR struct smart_read_write_s *req;
FAR struct smart_sect_header_s *header;
size_t offset;
uint8_t byte;
#if defined(CONFIG_MTD_SMART_WEAR_LEVEL) || !defined(CONFIG_MTD_SMART_ENABLE_CRC)
uint16_t x;
#endif
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
FAR struct smart_allocsector_s *allocsector;
#endif
fvdbg("Entry\n");
req = (FAR struct smart_read_write_s *) arg;
DEBUGASSERT(req->offset <= dev->sectorsize);
DEBUGASSERT(req->offset+req->count <= dev->sectorsize);
/* Ensure the logical sector has been allocated */
if (req->logsector >= dev->totalsectors)
{
fdbg("Logical sector %d too large\n", req->logsector);
ret = -EINVAL;
goto errout;
}
header = (FAR struct smart_sect_header_s *) dev->rwbuffer;
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
/* Test if an adjustement to the wear levels is needed */
if (dev->minwearlevel >= SMART_WEAR_MIN_LEVEL ||
(dev->minwearlevel > 0 && dev->maxwearlevel >= SMART_WEAR_REORG_THRESHOLD))
{
/* Subtract dev->minwearlevel from all wear levels */
offset = dev->minwearlevel;
fvdbg("Reducing wear level bits by %d\n", offset);
for (x = 0; x < dev->geo.neraseblocks; x++)
{
smart_set_wear_level(dev, x, smart_get_wear_level(dev, x) - offset);
}
dev->minwearlevel -= offset;
dev->maxwearlevel -= offset;
/* Now write the new wear bits to the flash */
dev->wearflags &= ~SMART_WEARFLAGS_FORCE_REORG;
dev->wearflags |= SMART_WEARFLAGS_WRITE_NEEDED;
}
#endif
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
physsector = dev->sMap[req->logsector];
#else
physsector = smart_cache_lookup(dev, req->logsector);
#endif
if (physsector == 0xFFFF)
{
fdbg("Logical sector %d not allocated\n", req->logsector);
ret = -EINVAL;
goto errout;
}
/* Read the sector data into our buffer */
mtdblock = physsector * dev->mtdBlksPerSector;
ret = MTD_BREAD(dev->mtd, mtdblock, dev->mtdBlksPerSector, (FAR uint8_t *)
dev->rwbuffer);
if (ret != dev->mtdBlksPerSector)
{
fdbg("Error reading phys sector %d\n", physsector);
ret = -EIO;
goto errout;
}
/* Test if we need to relocate the sector to perform the write */
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
allocsector = dev->allocsector;
while (allocsector)
{
/* Test if the requested logical sector is a temp alloc */
if (allocsector->logical == req->logsector)
{
break;
}
allocsector = allocsector->next;
}
/* When CRC is enabled, then we always have to relocate the sector if
* it is not a temporary alloc (i.e. initial alloc before the very first
* write operation).
*/
if (!allocsector)
{
needsrelocate = TRUE;
}
#else
/* When CRC is not enabled, we may be able to simply add the new data to
* the sector if it doesn't conflict with existing data on the device.
* Test if there is a conflict in the data.
*/
for (x = 0; x < req->count; x++)
{
/* Test if the next byte can be written to the flash */
byte = dev->rwbuffer[sizeof(struct smart_sect_header_s) + req->offset + x];
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
if (((byte ^ req->buffer[x]) | byte) != byte)
{
needsrelocate = TRUE;
break;
}
#else
if (((byte ^ req->buffer[x]) | req->buffer[x]) != req->buffer[x])
{
needsrelocate = TRUE;
break;
}
#endif
}
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
/* If we are not using CRC and on a device that supports re-writing
bits from 1 to 0 without neededing a block erase, such as NOR
FLASH, then we can simply update the data in place and don't need
to relocate the sector. Test if we need to relocate or not.
*/
if (needsrelocate)
{
/* Find a new physical sector to save data to */
oldphyssector = physsector;
physsector = smart_findfreephyssector(dev, FALSE);
if (physsector == 0xFFFF)
{
fdbg("Error relocating sector %d\n", req->logsector);
ret = -EIO;
goto errout;
}
/* Update the sequence number to indicate the sector was moved */
#if SMART_STATUS_VERSION == 1
if (header->status & SMART_STATUS_CRC)
{
#endif
header->seq++;
if (header->seq == 0xFF)
{
header->seq = 0;
}
#if SMART_STATUS_VERSION == 1
}
else
{
(*((FAR uint16_t *) &header->seq))++;
if (*((FAR uint16_t *) &header->seq) == 0xFFFF)
*((FAR uint16_t *) &header->seq) = 1;
}
#else
header->seq++;
#endif
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
header->status |= SMART_STATUS_COMMITTED;
#else
header->status &= SMART_STATUS_COMMITTED;
#endif
}
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* When CRC is enabled and we have a temp alloc, then fill in the RW buffer
* with the header information prior to copying the write data to the buf.
*/
if (allocsector)
{
smart_write_alloc_sector(dev, allocsector->logical, allocsector->physical);
/* Remove allocsector from the list and free the memory */
if (dev->allocsector == allocsector)
{
/* We are the head item. Remove ourselves as head */
dev->allocsector = allocsector->next;
}
else
{
FAR struct smart_allocsector_s *prev;
/* Start at head and find our entry */
prev = dev->allocsector;
while (prev && prev->next != allocsector)
{
/* Scan the list until we find this entry */
prev = prev->next;
}
if (prev)
{
/* Remove from the list */
prev->next = allocsector->next;
}
}
/* Now free the memory */
kmm_free(allocsector);
}
/* Now copy the data to the sector buffer. */
memcpy(&dev->rwbuffer[sizeof(struct smart_sect_header_s) + req->offset],
req->buffer, req->count);
/* Commit the sector ahead of time. The CRC will protect us */
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
header->status &= ~(SMART_STATUS_COMMITTED | SMART_STATUS_CRC);
#else
header->status |= SMART_STATUS_COMMITTED | SMART_STATUS_CRC;
#endif
/* Now calculate the CRC value for the sector */
#ifdef CONFIG_SMART_CRC_8
header->crc8 = smart_calc_sector_crc(dev);
#elif defined(CONFIG_SMART_CRC_16)
*((uint16_t *) header->crc16) = smart_calc_sector_crc(dev);
#elif defined(CONFIG_SMART_CRC_32)
*((uint32_t *) header->crc32) = smart_calc_sector_crc(dev);
#endif
#else /* CONFIG_MTD_SMART_ENABLE_CRC */
/* Now copy the data to the sector buffer. */
memcpy(&dev->rwbuffer[sizeof(struct smart_sect_header_s) + req->offset],
req->buffer, req->count);
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
/* Now write the sector buffer to the device. */
if (needsrelocate)
{
/* Write the entire sector to the new physical location, uncommitted. */
ret = MTD_BWRITE(dev->mtd, physsector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
if (ret != dev->mtdBlksPerSector)
{
fdbg("Error writing to physical sector %d\n", physsector);
ret = -EIO;
goto errout;
}
/* Commit the new physical sector */
#ifndef CONFIG_MTD_SMART_ENABLE_CRC
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
byte = header->status & ~SMART_STATUS_COMMITTED;
#else
byte = header->status | SMART_STATUS_COMMITTED;
#endif
offset = physsector * dev->mtdBlksPerSector * dev->geo.blocksize +
offsetof(struct smart_sect_header_s, status);
ret = smart_bytewrite(dev, offset, 1, &byte);
if (ret != 1)
{
fvdbg("Error committing physical sector %d\n", physsector);
ret = -EIO;
goto errout;
}
#endif
/* Release the old physical sector */
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
byte = header->status & ~(SMART_STATUS_RELEASED | SMART_STATUS_COMMITTED);
#else
byte = header->status | SMART_STATUS_RELEASED | SMART_STATUS_COMMITTED;
#endif
offset = mtdblock * dev->geo.blocksize +
offsetof(struct smart_sect_header_s, status);
ret = smart_bytewrite(dev, offset, 1, &byte);
/* Update releasecount for released sector and freecount for the
* newly allocated physical sector. */
block = oldphyssector / dev->sectorsPerBlk;
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_add_count(dev, dev->releasecount, block, 1);
smart_add_count(dev, dev->freecount, physsector / dev->sectorsPerBlk, -1);
#else
dev->releasecount[block]++;
dev->freecount[physsector / dev->sectorsPerBlk]--;
#endif
dev->freesectors--;
dev->releasesectors++;
#ifdef CONFIG_SMART_LOCAL_CHECKFREE
/* Perform debug free count checking enabled */
smart_checkfree(dev, __LINE__);
#endif
/* Update the sector map */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap[req->logsector] = physsector;
#else
smart_update_cache(dev, req->logsector, physsector);
#endif
/* Test if releasing the sector created an empty erase block */
smart_erase_block_if_empty(dev, block, FALSE);
/* Since we performed a relocation, do garbage collection to
* ensure we don't fill up our flash with released blocks.
*/
smart_garbagecollect(dev);
}
else /* needsrelocate */
{
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* Write the entire sector to FLASH when CRC enabled */
ret = MTD_BWRITE(dev->mtd, physsector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
if (ret != dev->mtdBlksPerSector)
{
fdbg("Error writing to physical sector %d\n", physsector);
ret = -EIO;
goto errout;
}
/* Read the sector back and validate the CRC. */
ret = MTD_BREAD(dev->mtd, physsector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
if (ret == dev->mtdBlksPerSector)
{
/* Validate the CRC of the read-back data */
ret = smart_validate_crc(dev);
}
if (ret != OK)
{
/* TODO: Mark this as a bad block! */
fdbg("Error validating physical sector %d\n", physsector);
ret = -EIO;
goto errout;
}
#else
/* Not relocated. Just write the portion of the sector that needs
* to be written. */
offset = mtdblock * dev->geo.blocksize +
sizeof(struct smart_sect_header_s) + req->offset;
ret = smart_bytewrite(dev, offset, req->count, req->buffer);
#endif
}
ret = OK;
errout:
return ret;
}
#endif /* CONFIG_FS_WRITABLE */
/****************************************************************************
* Name: smart_readsector
*
* Description: Reads data from the specified logical sector. The sector
* should have already been allocated prior to the read.
*
****************************************************************************/
static int smart_readsector(FAR struct smart_struct_s *dev,
unsigned long arg)
{
int ret;
uint16_t physsector;
FAR struct smart_read_write_s *req;
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
#if SMART_STATUS_VERSION == 1
FAR struct smart_sect_header_s *header;
#endif
#else
uint32_t readaddr;
struct smart_sect_header_s header;
#endif
fvdbg("Entry\n");
req = (FAR struct smart_read_write_s *) arg;
DEBUGASSERT(req->offset < dev->sectorsize);
DEBUGASSERT(req->offset+req->count < dev->sectorsize);
/* Ensure the logical sector has been allocated */
if (req->logsector >= dev->totalsectors)
{
fdbg("Logical sector %d too large\n", req->logsector);
ret = -EINVAL;
goto errout;
}
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
physsector = dev->sMap[req->logsector];
#else
physsector = smart_cache_lookup(dev, req->logsector);
#endif
if (physsector == 0xFFFF)
{
fdbg("Logical sector %d not allocated\n", req->logsector);
ret = -EINVAL;
goto errout;
}
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* When CRC is enabled, we read the entire sector into RAM so we can
* validate the CRC.
*/
ret = MTD_BREAD(dev->mtd, physsector * dev->mtdBlksPerSector,
dev->mtdBlksPerSector, (FAR uint8_t *) dev->rwbuffer);
if (ret != dev->mtdBlksPerSector)
{
/* TODO: Mark the block bad */
fdbg("Error reading phys sector %d\n", physsector);
ret = -EIO;
goto errout;
}
#if SMART_STATUS_VERSION == 1
/* Test if this sector has CRC enabled or not */
header = (FAR struct smart_sect_header_s *) dev->rwbuffer;
if ((header->status & SMART_STATUS_CRC) == (CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_CRC))
{
/* Format VERSION 1 supports either no CRC or 8-bit CRC. Looks like
* CRC not enabled for this sector, so skip the CRC test.
*/
}
else
#endif
{
/* Validate the read CRC against the calculated sector CRC */
ret = smart_validate_crc(dev);
if (ret != OK)
{
/* TODO: Mark the block bad */
fdbg("Error validating sector %d CRC during read\n", physsector);
ret = -EIO;
goto errout;
}
}
/* Copy data to the output buffer */
memmove((FAR char *) req->buffer, &dev->rwbuffer[req->offset +
sizeof(struct smart_sect_header_s)], req->count);
ret = req->count;
#else /* CONFIG_MTD_SMART_ENABLE_CRC */
/* Read the sector header data to validate as a sanity check */
ret = MTD_READ(dev->mtd, physsector * dev->mtdBlksPerSector * dev->geo.blocksize,
sizeof(struct smart_sect_header_s), (FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
fvdbg("Error reading sector %d header\n", physsector);
ret = -EIO;
goto errout;
}
/* Do a sanity check on the header data */
if (((*(FAR uint16_t *) header.logicalsector) != req->logsector) ||
((header.status & SMART_STATUS_COMMITTED) ==
(CONFIG_SMARTFS_ERASEDSTATE & SMART_STATUS_COMMITTED)))
{
/* Error in sector header! How do we handle this? */
fdbg("Error in logical sector %d header, phys=%d\n",
req->logsector, physsector);
ret = -EIO;
goto errout;
}
/* Read the sector data into the buffer */
readaddr = (uint32_t) physsector * dev->mtdBlksPerSector * dev->geo.blocksize +
req->offset + sizeof(struct smart_sect_header_s);;
ret = MTD_READ(dev->mtd, readaddr, req->count, (FAR uint8_t *)
req->buffer);
if (ret != req->count)
{
fdbg("Error reading phys sector %d\n", physsector);
ret = -EIO;
goto errout;
}
#endif
errout:
return ret;
}
/****************************************************************************
* Name: smart_allocsector
*
* Description: Allocates a new logical sector. If an argument is given,
* then it tries to allocate the specified sector number.
*
****************************************************************************/
#ifdef CONFIG_FS_WRITABLE
static inline int smart_allocsector(FAR struct smart_struct_s *dev,
unsigned long requested)
{
int x;
uint16_t logsector = 0xFFFF; /* Logical sector number selected */
uint16_t physicalsector; /* The selected physical sector */
#ifndef CONFIG_MTD_SMART_ENABLE_CRC
int ret;
#endif
/* Validate that we have enough sectors available to perform an
* allocation. We have to ensure we keep enough reserved sectors
* on hand to do released sector garbage collection. */
if (dev->freesectors <= (dev->sectorsPerBlk << 0) + 4)
{
/* Do a garbage collect and then test freesectors again */
if (dev->releasesectors + dev->freesectors > dev->availSectPerBlk + 4)
{
for (x = 0; x < dev->availSectPerBlk; x++)
{
smart_garbagecollect(dev);
if (dev->freesectors > dev->availSectPerBlk + 4)
break;
}
if (dev->freesectors <= (dev->availSectPerBlk << 0) + 4)
{
/* No space left!! */
return -ENOSPC;
}
}
else
{
/* No space left!! */
return -ENOSPC;
}
}
/* Check if a specific sector is being requested and allocate that
* sector if it isn't already in use */
if ((requested > 2) && (requested < dev->totalsectors))
{
/* Validate the sector is not already allocated */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
if (dev->sMap[requested] == (uint16_t) -1)
#else
if (!(dev->sBitMap[requested >> 3] & (1 << (requested & 0x07))))
#endif
{
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
FAR struct smart_allocsector_s *allocsect;
/* Ensure this logical sector doesn't have a temporary alloc */
allocsect = dev->allocsector;
while (allocsect)
{
if (allocsect->logical == requested)
{
break;
}
allocsect = allocsect->next;
}
if (allocsect != NULL)
{
}
else
#endif
logsector = requested;
}
}
/* Check if we need to scan for an available logical sector */
if (logsector == 0xFFFF)
{
/* Loop through all sectors and find one to allocate */
for (x = SMART_FIRST_ALLOC_SECTOR; x < dev->totalsectors; x++)
{
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
if (dev->sMap[x] == (uint16_t) -1)
#else
if (!(dev->sBitMap[x >> 3] & (1 << (x & 0x07))))
#endif
{
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
FAR struct smart_allocsector_s *allocsect;
/* Ensure this logical sector doesn't have a temporary alloc
* when CRC is enabled. With CRC enabled, when a sector is
* allocated, we don't actually update the FLASH until the
* very end when we have all data so the CRC can be calculated.
* Instead, we keep an in-memory linked list of allocated
* sectors until the write sector occurs.
*/
allocsect = dev->allocsector;
while (allocsect)
{
if (allocsect->logical == x)
{
break;
}
allocsect = allocsect->next;
}
if (allocsect != NULL)
{
/* This logical sector has an in-memory temp alloc */
continue;
}
#endif
/* Unused logical sector found. Use this one */
logsector = x;
break;
}
}
}
/* Test for an error allocating a sector */
if (logsector == 0xFFFF)
{
/* Hmmm. We think we had enough logical sectors, but
* something happened and we didn't find any free
* logical sectors. What do do? Report an error?
* rescan and try again to "self heal" in case of a
* bug in our code? */
fdbg("No free logical sector numbers! Free sectors = %d\n",
dev->freesectors);
return -EIO;
}
/* Check if we need to do garbage collection. We have to
* ensure we keep enough reserved free sectors to perform garbage
* collection as it involves moving sectors from blocks with
* released sectors into blocks with free sectors, then
* erasing the vacated block. */
smart_garbagecollect(dev);
/* Find a free physical sector */
physicalsector = smart_findfreephyssector(dev, FALSE);
fvdbg("Alloc: log=%d, phys=%d, erase block=%d, free=%d, released=%d\n",
logsector, physicalsector, physicalsector /
dev->sectorsPerBlk, dev->freesectors, releasecount);
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
/* When CRC is enabled, we don't write the header to the device until
* the data is written via writesector. Just add the allocation to
* our temporary allocsector list and we'll pick it up later.
*/
{
FAR struct smart_allocsector_s *allocsect = (FAR struct smart_allocsector_s *)
kmm_malloc(sizeof(struct smart_allocsector_s));
if (allocsect == NULL)
{
fdbg("Out of memory allocting sector\n");
return -ENOMEM;
}
/* Fill in the struct and add to the list. We are protected by the
* smartfs layer's mutex, so no locking required.
*/
allocsect->logical = logsector;
allocsect->physical = physicalsector;
allocsect->next = dev->allocsector;
dev->allocsector = allocsect;
}
#else /* CONFIG_MTD_SMART_ENABLE_CRC */
/* Write the logical sector to the flash. We will fill it in with data later. */
ret = smart_write_alloc_sector(dev, logsector, physicalsector);
if (ret != 1)
{
/* Error writing sector, return error */
return ret;
}
#endif /* CONFIG_MTD_SMART_ENABLE_CRC */
/* Map the sector and update the free sector counts */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap[logsector] = physicalsector;
#else
dev->sBitMap[logsector >> 3] |= (1 << (logsector & 0x07));
smart_add_sector_to_cache(dev, logsector, physicalsector, __LINE__ );
#endif
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_add_count(dev, dev->freecount, physicalsector / dev->sectorsPerBlk, -1);
#else
dev->freecount[physicalsector / dev->sectorsPerBlk]--;
#endif
dev->freesectors--;
/* Return the logical sector number */
return logsector;
}
#endif /* CONFIG_FS_WRITABLE */
/****************************************************************************
* Name: smart_freesector
*
* Description: Frees a logical sector from the device. Freeing (also
* called releasing) is performed by programming the released
* bit in the sector header's status byte.
*
****************************************************************************/
#ifdef CONFIG_FS_WRITABLE
static inline int smart_freesector(FAR struct smart_struct_s *dev,
unsigned long logicalsector)
{
int ret;
int readaddr;
uint16_t physsector;
uint16_t block;
struct smart_sect_header_s header;
size_t offset;
/* Check if the logical sector is within bounds */
if ((logicalsector > 2) && (logicalsector < dev->totalsectors))
{
/* Validate the sector is actually allocated */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
if (dev->sMap[logicalsector] == (uint16_t) -1)
#else
if (!(dev->sBitMap[logicalsector >> 3] & (1 << (logicalsector & 0x07))))
#endif
{
fdbg("Invalid release - sector %d not allocated\n", logicalsector);
ret = -EINVAL;
goto errout;
}
}
/* Okay to release the sector. Read the sector header info */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
physsector = dev->sMap[logicalsector];
#else
physsector = smart_cache_lookup(dev, logicalsector);
#endif
readaddr = physsector * dev->mtdBlksPerSector * dev->geo.blocksize;
ret = MTD_READ(dev->mtd, readaddr, sizeof(struct smart_sect_header_s),
(FAR uint8_t *) &header);
if (ret != sizeof(struct smart_sect_header_s))
{
goto errout;
}
/* Do a sanity check on the logical sector number */
if (*((FAR uint16_t *) header.logicalsector) != (uint16_t) logicalsector)
{
/* Hmmm... something is wrong. This should always match! Bug in our code? */
fdbg("Sector %d logical sector in header doesn't match\n", logicalsector);
ret = -EINVAL;
goto errout;
}
/* Mark the sector as released */
#if CONFIG_SMARTFS_ERASEDSTATE == 0xFF
header.status &= ~SMART_STATUS_RELEASED;
#else
header.status |= SMART_STATUS_RELEASED;
#endif
/* Write the status back to the device */
offset = readaddr + offsetof(struct smart_sect_header_s, status);
ret = smart_bytewrite(dev, offset, 1, &header.status);
if (ret != 1)
{
fdbg("Error updating physical sector %d status\n", physsector);
goto errout;
}
/* Update the erase block's release count */
dev->releasesectors++;
block = physsector / dev->sectorsPerBlk;
#ifdef CONFIG_MTD_SMART_PACK_COUNTS
smart_add_count(dev, dev->releasecount, block, 1);
#else
dev->releasecount[block]++;
#endif
/* Unmap this logical sector */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap[logicalsector] = (uint16_t) -1;
#else
dev->sBitMap[logicalsector >> 3] &= ~(1 << (logicalsector & 0x07));
smart_update_cache(dev, logicalsector, 0xFFFF);
#endif
/* If this block has only released blocks, then erase it */
smart_erase_block_if_empty(dev, block, FALSE);
ret = OK;
errout:
return ret;
}
#endif /* CONFIG_FS_WRITABLE */
/****************************************************************************
* Name: smart_ioctl
*
* Description: Return device geometry
*
****************************************************************************/
static int smart_ioctl(FAR struct inode *inode, int cmd, unsigned long arg)
{
FAR struct smart_struct_s *dev ;
int ret;
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
FAR struct mtd_smart_procfs_data_s *procfs_data;
FAR struct mtd_smart_debug_data_s *debug_data;
#endif
fvdbg("Entry\n");
DEBUGASSERT(inode && inode->i_private);
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
dev = ((FAR struct smart_multiroot_device_s*) inode->i_private)->dev;
#else
dev = (FAR struct smart_struct_s *)inode->i_private;
#endif
/* Process the ioctl's we care about first, pass any we don't respond
* to directly to the underlying MTD device.
*/
switch (cmd)
{
case BIOC_XIPBASE:
/* The argument accompanying the BIOC_XIPBASE should be non-NULL. If
* DEBUG is enabled, we will catch it here instead of in the MTD
* driver.
*/
#ifdef CONFIG_DEBUG
if (arg == 0)
{
fdbg("ERROR: BIOC_XIPBASE argument is NULL\n");
return -EINVAL;
}
#endif
/* Just change the BIOC_XIPBASE command to the MTDIOC_XIPBASE command. */
cmd = MTDIOC_XIPBASE;
break;
case BIOC_GETFORMAT:
/* Return the format information for the device */
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
ret = smart_getformat(dev, (FAR struct smart_format_s *) arg,
((FAR struct smart_multiroot_device_s*) inode->i_private)->rootdirnum);
#else
ret = smart_getformat(dev, (FAR struct smart_format_s *) arg);
#endif
goto ok_out;
case BIOC_READSECT:
/* Do a logical sector read and return the data */
ret = smart_readsector(dev, arg);
goto ok_out;
#ifdef CONFIG_FS_WRITABLE
case BIOC_LLFORMAT:
/* Perform a low-level format on the flash */
ret = smart_llformat(dev, arg);
goto ok_out;
case BIOC_ALLOCSECT:
/* Allocate a logical sector for the upper layer file system */
ret = smart_allocsector(dev, arg);
goto ok_out;
case BIOC_FREESECT:
/* Free the specified logical sector */
ret = smart_freesector(dev, arg);
goto ok_out;
case BIOC_WRITESECT:
/* Write to the sector */
ret = smart_writesector(dev, arg);
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
if (dev->wearflags & SMART_WEARFLAGS_WRITE_NEEDED)
{
/* Write new wear status bits to the device */
smart_write_wearstatus(dev);
}
#endif
goto ok_out;
#endif /* CONFIG_FS_WRITABLE */
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
case BIOC_GETPROCFSD:
/* Get ProcFS data */
procfs_data = (FAR struct mtd_smart_procfs_data_s *) arg;
procfs_data->totalsectors = dev->totalsectors;
procfs_data->sectorsize = dev->sectorsize;
procfs_data->freesectors = dev->freesectors;
procfs_data->releasesectors = dev->releasesectors;
procfs_data->namelen = dev->namesize;
procfs_data->formatversion = dev->formatversion;
procfs_data->unusedsectors = dev->unusedsectors;
procfs_data->blockerases = dev->blockerases;
procfs_data->sectorsperblk = dev->sectorsPerBlk;
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
procfs_data->formatsector = dev->sMap[0];
procfs_data->dirsector = dev->sMap[3];
#else
procfs_data->formatsector = smart_cache_lookup(dev, 0);
procfs_data->dirsector = smart_cache_lookup(dev, 3);
#endif
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
procfs_data->neraseblocks = dev->geo.neraseblocks;
procfs_data->erasecounts = dev->erasecounts;
#endif
#ifdef CONFIG_MTD_SMART_ALLOC_DEBUG
procfs_data->allocs = dev->alloc;
procfs_data->alloccount = SMART_MAX_ALLOCS;
#endif
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
procfs_data->uneven_wearcount = dev->uneven_wearcount;
#endif
ret = OK;
goto ok_out;
#endif
case BIOC_DEBUGCMD:
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
debug_data = (FAR struct mtd_smart_debug_data_s *) arg;
switch (debug_data->debugcmd)
{
case SMART_DEBUG_CMD_SET_DEBUG_LEVEL:
dev->debuglevel = debug_data->debugdata;
dbg("Debug level set to %d\n", dev->debuglevel);
ret = OK;
goto ok_out;
}
#endif
break;
}
/* No other block driver ioctl commands are not recognized by this
* driver. Other possible MTD driver ioctl commands are passed through
* to the MTD driver (unchanged).
*/
ret = MTD_IOCTL(dev->mtd, cmd, arg);
if (ret < 0)
{
fdbg("ERROR: MTD ioctl(%04x) failed: %d\n", cmd, ret);
}
ok_out:
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: smart_initialize
*
* Description:
* Initialize to provide a block driver wrapper around an MTD interface
*
* Input Parameters:
* minor - The minor device number. The MTD block device will be
* registered as as /dev/smartN where N is the minor number.
* mtd - The MTD device that supports the FLASH interface.
*
****************************************************************************/
int smart_initialize(int minor, FAR struct mtd_dev_s *mtd, FAR const char *partname)
{
FAR struct smart_struct_s *dev;
int ret = -ENOMEM;
uint32_t totalsectors;
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
FAR struct smart_multiroot_device_s *rootdirdev = NULL;
#endif
/* Sanity check */
#ifdef CONFIG_DEBUG
if (minor < 0 || minor > 255 || !mtd)
{
return -EINVAL;
}
#endif
/* Allocate a SMART device structure */
dev = (FAR struct smart_struct_s *)kmm_malloc(sizeof(struct smart_struct_s));
if (dev)
{
/* Initialize the SMART device structure */
dev->mtd = mtd;
#ifdef CONFIG_MTD_SMART_ALLOC_DEBUG
dev->bytesalloc = 0;
for (totalsectors = 0; totalsectors < SMART_MAX_ALLOCS; totalsectors++)
{
dev->alloc[totalsectors].ptr = NULL;
}
#endif
/* Get the device geometry. (casting to uintptr_t first eliminates
* complaints on some architectures where the sizeof long is different
* from the size of a pointer).
*/
/* Set these to zero in case the device doesn't support them */
ret = MTD_IOCTL(mtd, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&dev->geo));
if (ret < 0)
{
fdbg("MTD ioctl(MTDIOC_GEOMETRY) failed: %d\n", ret);
goto errout;
}
/* Set the sector size to the default for now */
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
dev->sMap = NULL;
#else
dev->sCache = NULL;
dev->sBitMap = NULL;
#endif
dev->rwbuffer = NULL;
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
dev->erasecounts = NULL;
#endif
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
dev->wearstatus = NULL;
#endif
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
dev->allocsector = NULL;
#endif
dev->sectorsize = 0;
ret = smart_setsectorsize(dev, CONFIG_MTD_SMART_SECTOR_SIZE);
if (ret != OK)
{
goto errout;
}
/* Calculate the totalsectors on this device and validate */
totalsectors = dev->neraseblocks * dev->sectorsPerBlk;
if (totalsectors > 65536)
{
fdbg("SMART Sector size too small for device\n");
ret = -EINVAL;
goto errout;
}
else if (totalsectors == 65536)
{
totalsectors -= 2;
}
dev->totalsectors = (uint16_t) totalsectors;
dev->freesectors = (uint16_t) dev->availSectPerBlk * dev->geo.neraseblocks;
dev->lastallocblock = 0;
dev->debuglevel = 0;
/* Mark the device format status an unknown */
dev->formatstatus = SMART_FMT_STAT_UNKNOWN;
dev->namesize = CONFIG_SMARTFS_MAXNAMLEN;
if (partname)
{
strncpy(dev->partname, partname, SMART_PARTNAME_SIZE);
}
else
{
dev->partname[0] = '\0';
}
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
dev->minor = minor;
#endif
/* Create a MTD block device name */
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
if (partname != NULL)
{
snprintf(dev->rwbuffer, 18, "/dev/smart%d%sd1", minor, partname);
}
else
{
snprintf(dev->rwbuffer, 18, "/dev/smart%dd1", minor);
}
/* Inode private data is a reference to a struct containing
* the SMART device structure and the root directory number.
*/
rootdirdev = (FAR struct smart_multiroot_device_s*) smart_malloc(dev,
sizeof(*rootdirdev), "Root Dir");
if (rootdirdev == NULL)
{
fdbg("register_blockdriver failed: %d\n", -ret);
ret = -ENOMEM;
goto errout;
}
/* Populate the rootdirdev */
rootdirdev->dev = dev;
rootdirdev->rootdirnum = 0;
ret = register_blockdriver(dev->rwbuffer, &g_bops, 0, rootdirdev);
#else
if (partname != NULL)
{
snprintf(dev->rwbuffer, 18, "/dev/smart%d%s", minor, partname);
}
else
{
snprintf(dev->rwbuffer, 18, "/dev/smart%d", minor);
}
/* Inode private data is a reference to the SMART device structure */
ret = register_blockdriver(dev->rwbuffer, &g_bops, 0, dev);
#endif
if (ret < 0)
{
fdbg("register_blockdriver failed: %d\n", -ret);
goto errout;
}
/* Do a scan of the device */
smart_scan(dev);
}
return OK;
errout:
#ifndef CONFIG_MTD_SMART_MINIMIZE_RAM
smart_free(dev, dev->sMap);
#else
smart_free(dev, dev->sBitMap);
smart_free(dev, dev->sCache);
#endif
smart_free(dev, dev->rwbuffer);
#ifdef CONFIG_MTD_SMART_WEAR_LEVEL
smart_free(dev, dev->wearstatus);
#endif
#ifdef CONFIG_MTD_SMART_SECTOR_ERASE_DEBUG
smart_free(dev, dev->erasecounts);
#endif
#ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS
if (rootdirdev)
{
smart_free(dev,rootdirdev);
}
#endif
kmm_free(dev);
return ret;
}
