/****************************************************************************
* drivers/net/vnet.c
*
* Copyright (C) 2011 Yu Qiang. All rights reserved.
* Author: Yu Qiang <yuq825@gmail.com>
*
* This file is a part of NuttX:
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_NET_VNET)
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <string.h>
#include <debug.h>
#include <wdog.h>
#include <errno.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <net/uip/uip.h>
#include <net/uip/uip-arp.h>
#include <net/uip/uip-arch.h>
#include <rgmp/vnet.h>
#include <rgmp/stdio.h>
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_VNET_NINTERFACES determines the number of physical interfaces
* that will be supported.
*/
#ifndef CONFIG_VNET_NINTERFACES
# define CONFIG_VNET_NINTERFACES 1
#endif
/* TX poll deley = 1 seconds. CLK_TCK is the number of clock ticks per second */
#define VNET_WDDELAY (1*CLK_TCK)
#define VNET_POLLHSEC (1*2)
/* TX timeout = 1 minute */
#define VNET_TXTIMEOUT (60*CLK_TCK)
/* This is a helper pointer for accessing the contents of the Ethernet header */
#define BUF ((struct uip_eth_hdr *)vnet->sk_dev.d_buf)
/****************************************************************************
* Private Types
****************************************************************************/
/* The vnet_driver_s encapsulates all state information for a single hardware
* interface
*/
struct vnet_driver_s
{
bool sk_bifup; /* true:ifup false:ifdown */
WDOG_ID sk_txpoll; /* TX poll timer */
//WDOG_ID sk_txtimeout; /* TX timeout timer */
/* This holds the information visible to uIP/NuttX */
struct rgmp_vnet *vnet;
struct uip_driver_s sk_dev; /* Interface understood by uIP */
};
/****************************************************************************
* Private Data
****************************************************************************/
static struct vnet_driver_s g_vnet[CONFIG_VNET_NINTERFACES];
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Common TX logic */
static int vnet_transmit(FAR struct vnet_driver_s *vnet);
static int vnet_uiptxpoll(struct uip_driver_s *dev);
/* Interrupt handling */
static void vnet_receive(FAR struct vnet_driver_s *vnet);
static void vnet_txdone(FAR struct vnet_driver_s *vnet);
/* Watchdog timer expirations */
static void vnet_polltimer(int argc, uint32_t arg, ...);
static void vnet_txtimeout(int argc, uint32_t arg, ...);
/* NuttX callback functions */
static int vnet_ifup(struct uip_driver_s *dev);
static int vnet_ifdown(struct uip_driver_s *dev);
static int vnet_txavail(struct uip_driver_s *dev);
#ifdef CONFIG_NET_IGMP
static int vnet_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
static int vnet_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Function: vnet_transmit
*
* Description:
* Start hardware transmission. Called either from the txdone interrupt
* handling or from watchdog based polling.
*
* Parameters:
* vnet - Reference to the driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static int vnet_transmit(FAR struct vnet_driver_s *vnet)
{
int err;
/* Verify that the hardware is ready to send another packet. If we get
* here, then we are committed to sending a packet; Higher level logic
* must have assured that there is not transmission in progress.
*/
/* Increment statistics */
/* Send the packet: address=vnet->sk_dev.d_buf, length=vnet->sk_dev.d_len */
err = vnet_xmit(vnet->vnet, (char *)vnet->sk_dev.d_buf, vnet->sk_dev.d_len);
if (err) {
/* Setup the TX timeout watchdog (perhaps restarting the timer) */
//(void)wd_start(vnet->sk_txtimeout, VNET_TXTIMEOUT, vnet_txtimeout, 1, (uint32_t)vnet);
// When vnet_xmit fail, it means TX buffer is full. Watchdog
// is of no use here because no TX done INT will happen. So
// we reset the TX buffer directly.
#ifdef CONFIG_DEBUG
cprintf("VNET: TX buffer is full\n");
#endif
return ERROR;
}
else {
// this step may be unnecessary here
vnet_txdone(vnet);
}
return OK;
}
/****************************************************************************
* Function: vnet_uiptxpoll
*
* Description:
* The transmitter is available, check if uIP has any outgoing packets ready
* to send. This is a callback from uip_poll(). uip_poll() may be called:
*
* 1. When the preceding TX packet send is complete,
* 2. When the preceding TX packet send timesout and the interface is reset
* 3. During normal TX polling
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static int vnet_uiptxpoll(struct uip_driver_s *dev)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private;
/* If the polling resulted in data that should be sent out on the network,
* the field d_len is set to a value > 0.
*/
if (vnet->sk_dev.d_len > 0)
{
uip_arp_out(&vnet->sk_dev);
vnet_transmit(vnet);
/* Check if there is room in the device to hold another packet. If not,
* return a non-zero value to terminate the poll.
*/
if (vnet_is_txbuff_full(vnet->vnet))
return 1;
}
/* If zero is returned, the polling will continue until all connections have
* been examined.
*/
return 0;
}
/****************************************************************************
* Function: vnet_receive
*
* Description:
* An interrupt was received indicating the availability of a new RX packet
*
* Parameters:
* vnet - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
void rtos_vnet_recv(struct rgmp_vnet *vnet_dummy, char *data, int len)
{
// now only support 1 vnet
struct vnet_driver_s *vnet = &g_vnet[0];
do {
/* Check for errors and update statistics */
/* Check if the packet is a valid size for the uIP buffer configuration */
if (len > CONFIG_NET_BUFSIZE || len < 14) {
#ifdef CONFIG_DEBUG
cprintf("VNET: receive invalid packet of size %d\n", len);
#endif
return;
}
// Copy the data data from the hardware to vnet->sk_dev.d_buf. Set
// amount of data in vnet->sk_dev.d_len
memcpy(vnet->sk_dev.d_buf, data, len);
vnet->sk_dev.d_len = len;
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv6
if (BUF->type == HTONS(UIP_ETHTYPE_IP6))
#else
if (BUF->type == HTONS(UIP_ETHTYPE_IP))
#endif
{
uip_arp_ipin(&vnet->sk_dev);
uip_input(&vnet->sk_dev);
// If the above function invocation resulted in data that should be
// sent out on the network, the field d_len will set to a value > 0.
if (vnet->sk_dev.d_len > 0) {
uip_arp_out(&vnet->sk_dev);
vnet_transmit(vnet);
}
}
else if (BUF->type == htons(UIP_ETHTYPE_ARP)) {
uip_arp_arpin(&vnet->sk_dev);
// If the above function invocation resulted in data that should be
// sent out on the network, the field d_len will set to a value > 0.
if (vnet->sk_dev.d_len > 0) {
vnet_transmit(vnet);
}
}
}
while (0); /* While there are more packets to be processed */
}
/****************************************************************************
* Function: vnet_txdone
*
* Description:
* An interrupt was received indicating that the last TX packet(s) is done
*
* Parameters:
* vnet - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void vnet_txdone(FAR struct vnet_driver_s *vnet)
{
/* Check for errors and update statistics */
/* If no further xmits are pending, then cancel the TX timeout and
* disable further Tx interrupts.
*/
//wd_cancel(vnet->sk_txtimeout);
/* Then poll uIP for new XMIT data */
(void)uip_poll(&vnet->sk_dev, vnet_uiptxpoll);
}
/****************************************************************************
* Function: vnet_txtimeout
*
* Description:
* Our TX watchdog timed out. Called from the timer interrupt handler.
* The last TX never completed. Reset the hardware and start again.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void vnet_txtimeout(int argc, uint32_t arg, ...)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)arg;
/* Increment statistics and dump debug info */
/* Then reset the hardware */
/* Then poll uIP for new XMIT data */
(void)uip_poll(&vnet->sk_dev, vnet_uiptxpoll);
}
/****************************************************************************
* Function: vnet_polltimer
*
* Description:
* Periodic timer handler. Called from the timer interrupt handler.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void vnet_polltimer(int argc, uint32_t arg, ...)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)arg;
/* Check if there is room in the send another TX packet. We cannot perform
* the TX poll if he are unable to accept another packet for transmission.
*/
if (vnet_is_txbuff_full(vnet->vnet)) {
#ifdef CONFIG_DEBUG
cprintf("VNET: TX buffer is full\n");
#endif
return;
}
/* If so, update TCP timing states and poll uIP for new XMIT data. Hmmm..
* might be bug here. Does this mean if there is a transmit in progress,
* we will missing TCP time state updates?
*/
(void)uip_timer(&vnet->sk_dev, vnet_uiptxpoll, VNET_POLLHSEC);
/* Setup the watchdog poll timer again */
(void)wd_start(vnet->sk_txpoll, VNET_WDDELAY, vnet_polltimer, 1, arg);
}
/****************************************************************************
* Function: vnet_ifup
*
* Description:
* NuttX Callback: Bring up the Ethernet interface when an IP address is
* provided
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int vnet_ifup(struct uip_driver_s *dev)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private;
ndbg("Bringing up: %d.%d.%d.%d\n",
dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
(dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24 );
/* Initialize PHYs, the Ethernet interface, and setup up Ethernet interrupts */
/* Set and activate a timer process */
(void)wd_start(vnet->sk_txpoll, VNET_WDDELAY, vnet_polltimer, 1, (uint32_t)vnet);
vnet->sk_bifup = true;
return OK;
}
/****************************************************************************
* Function: vnet_ifdown
*
* Description:
* NuttX Callback: Stop the interface.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int vnet_ifdown(struct uip_driver_s *dev)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private;
irqstate_t flags;
/* Disable the Ethernet interrupt */
flags = irqsave();
/* Cancel the TX poll timer and TX timeout timers */
wd_cancel(vnet->sk_txpoll);
//wd_cancel(vnet->sk_txtimeout);
/* Put the the EMAC is its reset, non-operational state. This should be
* a known configuration that will guarantee the vnet_ifup() always
* successfully brings the interface back up.
*/
/* Mark the device "down" */
vnet->sk_bifup = false;
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: vnet_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called in normal user mode
*
****************************************************************************/
static int vnet_txavail(struct uip_driver_s *dev)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private;
irqstate_t flags;
/* Disable interrupts because this function may be called from interrupt
* level processing.
*/
flags = irqsave();
/* Ignore the notification if the interface is not yet up */
if (vnet->sk_bifup)
{
/* Check if there is room in the hardware to hold another outgoing packet. */
if (vnet_is_txbuff_full(vnet->vnet)) {
#ifdef CONFIG_DEBUG
cprintf("VNET: TX buffer is full\n");
#endif
goto out;
}
/* If so, then poll uIP for new XMIT data */
(void)uip_poll(&vnet->sk_dev, vnet_uiptxpoll);
}
out:
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: vnet_addmac
*
* Description:
* NuttX Callback: Add the specified MAC address to the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int vnet_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Function: vnet_rmmac
*
* Description:
* NuttX Callback: Remove the specified MAC address from the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int vnet_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct vnet_driver_s *vnet = (FAR struct vnet_driver_s *)dev->d_private;
/* Add the MAC address to the hardware multicast routing table */
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: vnet_initialize
*
* Description:
* Initialize the Ethernet controller and driver
*
* Parameters:
* intf - In the case where there are multiple EMACs, this value
* identifies which EMAC is to be initialized.
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
void vnet_initialize(void)
{
struct vnet_driver_s *priv;
struct rgmp_vnet *vnet = vnet_list.next;
int i;
for (i=0; i<CONFIG_VNET_NINTERFACES; i++) {
if (vnet == NULL)
break;
priv = &g_vnet[i];
/* Initialize the driver structure */
memset(priv, 0, sizeof(struct vnet_driver_s));
priv->sk_dev.d_ifup = vnet_ifup; /* I/F down callback */
priv->sk_dev.d_ifdown = vnet_ifdown; /* I/F up (new IP address) callback */
priv->sk_dev.d_txavail = vnet_txavail; /* New TX data callback */
#ifdef CONFIG_NET_IGMP
priv->sk_dev.d_addmac = vnet_addmac; /* Add multicast MAC address */
priv->sk_dev.d_rmmac = vnet_rmmac; /* Remove multicast MAC address */
#endif
priv->sk_dev.d_private = (void*)g_vnet; /* Used to recover private state from dev */
/* Create a watchdog for timing polling for and timing of transmisstions */
priv->sk_txpoll = wd_create(); /* Create periodic poll timer */
//priv->sk_txtimeout = wd_create(); /* Create TX timeout timer */
priv->vnet = vnet;
/* Register the device with the OS */
(void)netdev_register(&priv->sk_dev);
vnet = vnet->next;
}
}
#endif /* CONFIG_NET && CONFIG_NET_VNET */