/****************************************************************************
* include/sys/socket.h
*
* Copyright (C) 2007, 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_SYS_SOCKET_H
#define __INCLUDE_SYS_SOCKET_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <sys/types.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* The socket()domain parameter specifies a communication domain; this selects
* the protocol family which will be used for communication.
*/
/* Protocol families */
#define PF_UNSPEC 0 /* Protocol family unspecified */
#define PF_UNIX 1 /* Local communication */
#define PF_LOCAL 1 /* Local communication */
#define PF_INET 2 /* IPv4 Internet protocols */
#define PF_INET6 3 /* IPv6 Internet protocols */
#define PF_IPX 4 /* IPX - Novell protocols */
#define PF_NETLINK 5 /* Kernel user interface device */
#define PF_X25 6 /* ITU-T X.25 / ISO-8208 protocol */
#define PF_AX25 7 /* Amateur radio AX.25 protocol */
#define PF_ATMPVC 8 /* Access to raw ATM PVCs */
#define PF_APPLETALK 9 /* Appletalk */
#define PF_PACKET 10 /* Low level packet interface */
/* Address families */
#define AF_UNSPEC PF_UNSPEC
#define AF_UNIX PF_UNIX
#define AF_LOCAL PF_LOCAL
#define AF_INET PF_INET
#define AF_INET6 PF_INET6
#define AF_IPX PF_IPX
#define AF_NETLINK PF_NETLINK
#define AF_X25 PF_X25
#define AF_AX25 PF_AX25
#define AF_ATMPVC PF_ATMPVC
#define AF_APPLETALK PF_APPLETALK
#define AF_PACKET PF_PACKET
/* The socket created by socket() has the indicated type, which specifies
* the communication semantics.
*/
#define SOCK_STREAM 0 /* Provides sequenced, reliable, two-way, connection-based byte streams.
* An out-of-band data transmission mechanism may be supported. */
#define SOCK_DGRAM 1 /* Supports datagrams (connectionless, unreliable messages of a fixed
* maximum length). */
#define SOCK_SEQPACKET 2 /* Provides a sequenced, reliable, two-way connection-based data
* transmission path for datagrams of fixed maximum length; a consumer
* is required to read an entire packet with each read system call. */
#define SOCK_RAW 3 /* Provides raw network protocol access. */
#define SOCK_RDM 4 /* Provides a reliable datagram layer that does not guarantee ordering. */
#define SOCK_PACKET 5 /* Obsolete and should not be used in new programs */
/* Bits in the FLAGS argument to `send', `recv', et al. These are the bits
* recognized by Linus, not all are supported by NuttX.
*/
#define MSG_OOB 0x0001 /* Process out-of-band data. */
#define MSG_PEEK 0x0002 /* Peek at incoming messages. */
#define MSG_DONTROUTE 0x0004 /* Don't use local routing. */
#define MSG_CTRUNC 0x0008 /* Control data lost before delivery. */
#define MSG_PROXY 0x0010 /* Supply or ask second address. */
#define MSG_TRUNC 0x0020
#define MSG_DONTWAIT 0x0040 /* Enable nonblocking IO. */
#define MSG_EOR 0x0080 /* End of record. */
#define MSG_WAITALL 0x0100 /* Wait for a full request. */
#define MSG_FIN 0x0200
#define MSG_SYN 0x0400
#define MSG_CONFIRM 0x0800 /* Confirm path validity. */
#define MSG_RST 0x1000
#define MSG_ERRQUEUE 0x2000 /* Fetch message from error queue. */
#define MSG_NOSIGNAL 0x4000 /* Do not generate SIGPIPE. */
#define MSG_MORE 0x8000 /* Sender will send more. */
/* Socket options */
#define SO_DEBUG 0 /* Enables recording of debugging information (get/set).
* arg: pointer to integer containing a boolean value */
#define SO_ACCEPTCONN 1 /* Reports whether socket listening is enabled (get only).
* arg: pointer to integer containing a boolean value */
#define SO_BROADCAST 2 /* Permits sending of broadcast messages (get/set).
* arg: pointer to integer containing a boolean value */
#define SO_REUSEADDR 3 /* Allow reuse of local addresses (get/set)
* arg: pointer to integer containing a boolean value */
#define SO_KEEPALIVE 4 /* Keeps connections active by enabling the periodic transmission
* of messages (get/set).
* arg: pointer to integer containing a boolean value */
#define SO_LINGER 5 /* Lingers on a close() if data is present (get/set)
* arg: struct linger */
#define SO_OOBINLINE 6 /* Leaves received out-of-band data (data marked urgent) inline
* (get/set) arg: pointer to integer containing a boolean value */
#define SO_SNDBUF 7 /* Sets send buffer size. arg: integer value (get/set). */
#define SO_RCVBUF 8 /* Sets receive buffer size. arg: integer value (get/set). */
#define SO_ERROR 9 /* Reports and clears error status (get only). arg: returns
* an integer value */
#define SO_TYPE 10 /* Reports the socket type (get only). return: int */
#define SO_DONTROUTE 11 /* Requests that outgoing messages bypass standard routing (get/set)
* arg: pointer to integer containing a boolean value */
#define SO_RCVLOWAT 12 /* Sets the minimum number of bytes to process for socket input
* (get/set). arg: integer value */
#define SO_RCVTIMEO 13 /* Sets the timeout value that specifies the maximum amount of time
* an input function waits until it completes (get/set).
* arg: struct timeval */
#define SO_SNDLOWAT 14 /* Sets the minimum number of bytes to process for socket output
* (get/set). arg: integer value */
#define SO_SNDTIMEO 15 /* Sets the timeout value specifying the amount of time that an
* output function blocks because flow control prevents data from
* being sent(get/set). arg: struct timeval */
/* Protocol levels supported by get/setsockopt(): */
#define SOL_SOCKET 0 /* Only socket-level options supported */
/****************************************************************************
* Type Definitions
****************************************************************************/
/* sockaddr_storage structure. This structure must be (1) large enough to
* accommodate all supported protocol-specific address structures, and (2)
* aligned at an appropriate boundary so that pointers to it can be cast
* as pointers to protocol-specific address structures and used to access
* the fields of those structures without alignment problems
*/
#ifdef CONFIG_NET_IPv6
struct sockaddr_storage
{
sa_family_t ss_family; /* Address family */
char ss_data[18]; /* 18-bytes of address data */
};
#else
struct sockaddr_storage
{
sa_family_t ss_family; /* Address family */
char ss_data[14]; /* 14-bytes of address data */
};
#endif
/* The sockaddr structure is used to define a socket address which is used
* in the bind(), connect(), getpeername(), getsockname(), recvfrom(), and
* sendto() functions.
*/
struct sockaddr
{
sa_family_t sa_family; /* Address family: See AF_* definitions */
char sa_data[14]; /* 14-bytes of address data */
};
/* Used with the SO_LINGER socket option */
struct linger
{
int l_onoff; /* Indicates whether linger option is enabled. */
int l_linger; /* Linger time, in seconds. */
};
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
int socket(int domain, int type, int protocol);
int bind(int sockfd, FAR const struct sockaddr *addr, socklen_t addrlen);
int connect(int sockfd, FAR const struct sockaddr *addr, socklen_t addrlen);
int listen(int sockfd, int backlog);
int accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen);
ssize_t send(int sockfd, FAR const void *buf, size_t len, int flags);
ssize_t sendto(int sockfd, FAR const void *buf, size_t len, int flags,
FAR const struct sockaddr *to, socklen_t tolen);
ssize_t recv(int sockfd, FAR void *buf, size_t len, int flags);
ssize_t recvfrom(int sockfd, FAR void *buf, size_t len, int flags,
FAR struct sockaddr *from, FAR socklen_t *fromlen);
int setsockopt(int sockfd, int level, int option,
FAR const void *value, socklen_t value_len);
int getsockopt(int sockfd, int level, int option,
FAR void *value, FAR socklen_t *value_len);
int getsockname(int sockfd, FAR struct sockaddr *addr,
FAR socklen_t *addrlen);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __INCLUDE_SYS_SOCKET_H */