(1) Fix a critical memory leak in the TCP read-ahead buffering logic; Add an option to suppress SDIO multi-block transfers in order to work around a buggy SDIO driver

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4415 42af7a65-404d-4744-a932-0658087f49c3

15 files changed, 379 insertions, 71 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 4dd369ef4..27bd1cb7f 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -2482,3 +2482,5 @@
 	  of TCP connection must be set up (just as with connect()).  The new file
 	  net_monitor.c holds the common TCP connection monitoring logic used by both
 	  the accecpt() and connect() logic.  Contributed by Max Nekludov.
+	* net/recvfrom.c and net/uip/uip_tcpcallback.c:  Fix a leak in the TCP
+	  read-ahead logic.  This is a *critical* bug fix!
diff --git a/nuttx/Documentation/NuttxPortingGuide.html b/nuttx/Documentation/NuttxPortingGuide.html
index c9656a6c5..04f4611d0 100644
--- a/nuttx/Documentation/NuttxPortingGuide.html
+++ b/nuttx/Documentation/NuttxPortingGuide.html
@@ -12,7 +12,7 @@
       <h1><big><font color="#3c34ec">
         <i>NuttX RTOS Porting Guide</i>
       </font></big></h1>
-      <p>Last Updated: February 5, 2011</p>
+      <p>Last Updated: February 22, 2011</p>
     </td>
   </tr>
 </table>
@@ -4474,6 +4474,11 @@ build
     <code>CONFIG_SDIO_WIDTH_D1_ONLY</code>: Select 1-bit transfer mode.  Default:
     4-bit transfer mode.
   </li>
+  <li>
+    <code>CONFIG_MMCSD_MULTIBLOCK_DISABLE</code>: Use only the single block transfer method.
+    This setting is used to work around buggy SDIO drivers that cannot handle
+    multiple block transfers.
+  </li>
 </ul>
 
 <h3>SDIO-based MMC/SD driver</h3>
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt
index fc8373df9..77d8a556b 100644
--- a/nuttx/configs/README.txt
+++ b/nuttx/configs/README.txt
@@ -710,6 +710,9 @@ defconfig -- This is a configuration file similar to the Linux
 		  or hardware resources are shared with other drivers.
 		CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 		  4-bit transfer mode.
+		CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+		  This setting is used to work around buggy SDIO drivers that cannot handle
+		  multiple block transfers.
 
 	SDIO-based MMC/SD driver
 
diff --git a/nuttx/configs/stm3240g-eval/dhcpd/defconfig b/nuttx/configs/stm3240g-eval/dhcpd/defconfig
index 30ff4d545..b11a2d90a 100644
--- a/nuttx/configs/stm3240g-eval/dhcpd/defconfig
+++ b/nuttx/configs/stm3240g-eval/dhcpd/defconfig
@@ -699,6 +699,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -708,6 +711,7 @@ CONFIG_SDIO_DMA=n
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
diff --git a/nuttx/configs/stm3240g-eval/nettest/defconfig b/nuttx/configs/stm3240g-eval/nettest/defconfig
index 6fb7f862d..2f7d19956 100644
--- a/nuttx/configs/stm3240g-eval/nettest/defconfig
+++ b/nuttx/configs/stm3240g-eval/nettest/defconfig
@@ -699,6 +699,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -708,6 +711,7 @@ CONFIG_SDIO_DMA=n
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
diff --git a/nuttx/configs/stm3240g-eval/nsh/defconfig b/nuttx/configs/stm3240g-eval/nsh/defconfig
index bb4b25222..d3f9ecfa3 100644
--- a/nuttx/configs/stm3240g-eval/nsh/defconfig
+++ b/nuttx/configs/stm3240g-eval/nsh/defconfig
@@ -776,6 +776,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -785,6 +788,7 @@ CONFIG_SDIO_DMA=n
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
@@ -876,7 +880,7 @@ CONFIG_NET_RESOLV_ENTRIES=4
 # CONFIG_DISABLE_PTHREAD - pthread support is required
 # CONFIG_DISABLE_POLL - poll() support is required
 #
-CONFIG_FTPD_CMDBUFFERSIZE=512
+CONFIG_FTPD_CMDBUFFERSIZE=2048
 
 #
 # RTC Configuration
diff --git a/nuttx/configs/stm3240g-eval/nsh2/defconfig b/nuttx/configs/stm3240g-eval/nsh2/defconfig
index 1160cc96d..05f41123c 100644
--- a/nuttx/configs/stm3240g-eval/nsh2/defconfig
+++ b/nuttx/configs/stm3240g-eval/nsh2/defconfig
@@ -777,6 +777,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -786,6 +789,7 @@ CONFIG_SDIO_DMA=y
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
@@ -877,7 +881,7 @@ CONFIG_NET_RESOLV_ENTRIES=4
 # CONFIG_DISABLE_PTHREAD - pthread support is required
 # CONFIG_DISABLE_POLL - poll() support is required
 #
-CONFIG_FTPD_CMDBUFFERSIZE=512
+CONFIG_FTPD_CMDBUFFERSIZE=2048
 
 #
 # RTC Configuration
diff --git a/nuttx/configs/stm3240g-eval/ostest/defconfig b/nuttx/configs/stm3240g-eval/ostest/defconfig
index d95fc96e7..78a23b09a 100644
--- a/nuttx/configs/stm3240g-eval/ostest/defconfig
+++ b/nuttx/configs/stm3240g-eval/ostest/defconfig
@@ -687,6 +687,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -696,6 +699,7 @@ CONFIG_SDIO_DMA=n
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
diff --git a/nuttx/configs/stm3240g-eval/telnetd/defconfig b/nuttx/configs/stm3240g-eval/telnetd/defconfig
index 7a1394e9f..0726e0e12 100644
--- a/nuttx/configs/stm3240g-eval/telnetd/defconfig
+++ b/nuttx/configs/stm3240g-eval/telnetd/defconfig
@@ -699,6 +699,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -708,6 +711,7 @@ CONFIG_SDIO_DMA=n
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
diff --git a/nuttx/configs/stm32f4discovery/nsh/defconfig b/nuttx/configs/stm32f4discovery/nsh/defconfig
index e4e8789c3..ea5400882 100755
--- a/nuttx/configs/stm32f4discovery/nsh/defconfig
+++ b/nuttx/configs/stm32f4discovery/nsh/defconfig
@@ -706,6 +706,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -715,6 +718,7 @@ CONFIG_SDIO_DMA=n
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
diff --git a/nuttx/configs/stm32f4discovery/ostest/defconfig b/nuttx/configs/stm32f4discovery/ostest/defconfig
index 27cbb770d..60169385e 100755
--- a/nuttx/configs/stm32f4discovery/ostest/defconfig
+++ b/nuttx/configs/stm32f4discovery/ostest/defconfig
@@ -672,12 +672,16 @@ CONFIG_FS_WRITEBUFFER=n
 #
 # CONFIG_SDIO_DMA
 #   SDIO driver supports DMA
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
 #   SDIO driver card detection is 100% accurate
 #
 CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
diff --git a/nuttx/drivers/mmcsd/mmcsd_sdio.c b/nuttx/drivers/mmcsd/mmcsd_sdio.c
index 09c4efedf..20ef3ebe6 100644
--- a/nuttx/drivers/mmcsd/mmcsd_sdio.c
+++ b/nuttx/drivers/mmcsd/mmcsd_sdio.c
@@ -188,13 +188,17 @@ static bool    mmcsd_wrprotected(FAR struct mmcsd_state_s *priv);
 static int     mmcsd_eventwait(FAR struct mmcsd_state_s *priv,
                  sdio_eventset_t failevents, uint32_t timeout);
 static int     mmcsd_transferready(FAR struct mmcsd_state_s *priv);
+#ifndef CONFIG_MMCSD_MULTIBLOCK_DISABLE
 static int     mmcsd_stoptransmission(FAR struct mmcsd_state_s *priv);
+#endif
 static int     mmcsd_setblocklen(FAR struct mmcsd_state_s *priv,
                  uint32_t blocklen);
 static ssize_t mmcsd_readsingle(FAR struct mmcsd_state_s *priv,
                  FAR uint8_t *buffer, off_t startblock);
+#ifndef CONFIG_MMCSD_MULTIBLOCK_DISABLE
 static ssize_t mmcsd_readmultiple(FAR struct mmcsd_state_s *priv,
                  FAR uint8_t *buffer, off_t startblock, size_t nblocks);
+#endif
 #ifdef CONFIG_FS_READAHEAD
 static ssize_t mmcsd_reload(FAR void *dev, FAR uint8_t *buffer,
                  off_t startblock, size_t nblocks);
@@ -202,8 +206,10 @@ static ssize_t mmcsd_reload(FAR void *dev, FAR uint8_t *buffer,
 #ifdef CONFIG_FS_WRITABLE
 static ssize_t mmcsd_writesingle(FAR struct mmcsd_state_s *priv,
                  FAR const uint8_t *buffer, off_t startblock);
+#ifndef CONFIG_MMCSD_MULTIBLOCK_DISABLE
 static ssize_t mmcsd_writemultiple(FAR struct mmcsd_state_s *priv,
                  FAR const uint8_t *buffer, off_t startblock, size_t nblocks);
+#endif
 #ifdef CONFIG_FS_WRITEBUFFER
 static ssize_t mmcsd_flush(FAR void *dev, FAR const uint8_t *buffer,
                  off_t startblock, size_t nblocks);
@@ -1190,6 +1196,7 @@ static int mmcsd_transferready(FAR struct mmcsd_state_s *priv)
  *
  ****************************************************************************/
 
+#ifndef CONFIG_MMCSD_MULTIBLOCK_DISABLE
 static int mmcsd_stoptransmission(FAR struct mmcsd_state_s *priv)
 {
   int ret;
@@ -1204,6 +1211,7 @@ static int mmcsd_stoptransmission(FAR struct mmcsd_state_s *priv)
     }
   return ret;
 }
+#endif
 
 /****************************************************************************
  * Name: mmcsd_setblocklen
@@ -1355,6 +1363,7 @@ static ssize_t mmcsd_readsingle(FAR struct mmcsd_state_s *priv,
  *
  ****************************************************************************/
 
+#ifndef CONFIG_MMCSD_MULTIBLOCK_DISABLE
 static ssize_t mmcsd_readmultiple(FAR struct mmcsd_state_s *priv,
                                   FAR uint8_t *buffer, off_t startblock,
                                   size_t nblocks)
@@ -1461,6 +1470,7 @@ static ssize_t mmcsd_readmultiple(FAR struct mmcsd_state_s *priv,
 
   return nblocks;
 }
+#endif
 
 /****************************************************************************
  * Name: mmcsd_reload
@@ -1476,10 +1486,35 @@ static ssize_t mmcsd_reload(FAR void *dev, FAR uint8_t *buffer,
                             off_t startblock, size_t nblocks)
 {
   FAR struct mmcsd_state_s *priv = (FAR struct mmcsd_state_s *)dev;
+#ifdef CONFIG_MMCSD_MULTIBLOCK_DISABLE
+  size_t block;
+  size_t endblock;
+#endif
   ssize_t ret;
 
   DEBUGASSERT(priv != NULL && buffer != NULL && nblocks > 0)
 
+#ifdef CONFIG_MMCSD_MULTIBLOCK_DISABLE
+  /* Read each block using only the single block transfer method */
+
+  endblock = startblock + nblocks - 1;
+  for (block = startblock; block <= endblock; block++)
+    {
+      /* Read this block into the user buffer */
+
+      ret = mmcsd_readsingle(priv, buffer, block);
+      if (ret < 0)
+        {
+          break;
+        }
+
+      /* Increment the buffer pointer by the block size */
+
+      buffer += priv->blocksize;
+    }
+#else
+  /* Use either the single- or muliple-block transfer method */
+
   if (nblocks == 1)
     {
       ret = mmcsd_readsingle(priv, buffer, startblock);
@@ -1488,6 +1523,7 @@ static ssize_t mmcsd_reload(FAR void *dev, FAR uint8_t *buffer,
     {
       ret = mmcsd_readmultiple(priv, buffer, startblock, nblocks);
     }
+#endif
 
   /* On success, return the number of blocks read */
 
@@ -1614,7 +1650,7 @@ static ssize_t mmcsd_writesingle(FAR struct mmcsd_state_s *priv,
  *
  ****************************************************************************/
 
-#ifdef CONFIG_FS_WRITABLE
+#if defined(CONFIG_FS_WRITABLE) && !defined(CONFIG_MMCSD_MULTIBLOCK_DISABLE)
 static ssize_t mmcsd_writemultiple(FAR struct mmcsd_state_s *priv,
                                    FAR const uint8_t *buffer, off_t startblock,
                                    size_t nblocks)
@@ -1773,10 +1809,33 @@ static ssize_t mmcsd_flush(FAR void *dev, FAR const uint8_t *buffer,
                            off_t startblock, size_t nblocks)
 {
   FAR struct mmcsd_state_s *priv = (FAR struct mmcsd_state_s *)dev;
+#ifndef CONFIG_MMCSD_MULTIBLOCK_DISABLE
+  size_t block;
+  size_t endblock;
+#endif
   ssize_t ret;
 
   DEBUGASSERT(priv != NULL && buffer != NULL && nblocks > 0)
 
+#ifdef CONFIG_MMCSD_MULTIBLOCK_DISABLE
+  /* Write each block using only the single block transfer method */
+
+  endblock = startblock + nblocks - 1;
+  for (block = startblock; block <= endblock; block++)
+    {
+      /* Write this block from the user buffer */
+
+      ret = mmcsd_writesingle(priv, buffer, block);
+      if (ret < 0)
+        {
+          break;
+        }
+
+      /* Increment the buffer pointer by the block size */
+
+      buffer += priv->blocksize;
+    }
+#else
   if (nblocks == 1)
     {
       ret = mmcsd_writesingle(priv, buffer, startblock);
@@ -1785,6 +1844,7 @@ static ssize_t mmcsd_flush(FAR void *dev, FAR const uint8_t *buffer,
     {
       ret = mmcsd_writemultiple(priv, buffer, startblock, nblocks);
     }
+#endif
 
   /* On success, return the number of blocks written */
 
@@ -1856,6 +1916,10 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer,
                           size_t startsector, unsigned int nsectors)
 {
   FAR struct mmcsd_state_s *priv;
+#if !defined(CONFIG_FS_READAHEAD) && defined(CONFIG_MMCSD_MULTIBLOCK_DISABLE)
+  size_t sector;
+  size_t endsector;
+#endif
   ssize_t ret = 0;
 
   DEBUGASSERT(inode && inode->i_private);
@@ -1866,9 +1930,33 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer,
   if (nsectors > 0)
     {
       mmcsd_takesem(priv);
-#ifdef CONFIG_FS_READAHEAD
+
+#if defined(CONFIG_FS_READAHEAD)
+      /* Get the data from the read-ahead buffer */
+
       ret = rwb_read(&priv->rwbuffer, startsector, nsectors, buffer);
+
+#elif defined(CONFIG_MMCSD_MULTIBLOCK_DISABLE)
+      /* Read each block using only the single block transfer method */
+
+      endsector = startsector + nsectors - 1;
+      for (sector = startsector; sector <= endsector; sector++)
+        {
+          /* Read this sector into the user buffer */
+
+          ret = mmcsd_readsingle(priv, buffer, sector);
+          if (ret < 0)
+            {
+              break;
+            }
+
+          /* Increment the buffer pointer by the sector size */
+
+          buffer += priv->blocksize;
+        }
 #else
+      /* Use either the single- or muliple-block transfer method */
+
       if (nsectors == 1)
         {
           ret = mmcsd_readsingle(priv, buffer, startsector);
@@ -1896,20 +1984,48 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer,
  ****************************************************************************/
 
 #ifdef CONFIG_FS_WRITABLE
-static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer,
+static ssize_t mmcsd_write(FAR struct inode *inode, FAR const unsigned char *buffer,
                            size_t startsector, unsigned int nsectors)
 {
   FAR struct mmcsd_state_s *priv;
-  int ret;
+#if !defined(CONFIG_FS_WRITEBUFFER) && defined(CONFIG_MMCSD_MULTIBLOCK_DISABLE)
+  size_t sector;
+  size_t endsector;
+#endif
+  ssize_t ret = 0;
 
   fvdbg("sector: %d nsectors: %d sectorsize: %d\n");
   DEBUGASSERT(inode && inode->i_private);
   priv = (FAR struct mmcsd_state_s *)inode->i_private;
 
   mmcsd_takesem(priv);
-#ifdef CONFIG_FS_WRITEBUFFER
+
+#if defined(CONFIG_FS_WRITEBUFFER)
+  /* Write the data to the write buffer */
+
   ret = rwb_write(&priv->rwbuffer, startsector, nsectors, buffer);
+
+#elif defined(CONFIG_MMCSD_MULTIBLOCK_DISABLE)
+  /* Write each block using only the single block transfer method */
+
+  endsector = startsector + nsectors - 1;
+  for (sector = startsector; sector <= endsector; sector++)
+    {
+      /* Write this block from the user buffer */
+
+      ret = mmcsd_writesingle(priv, buffer, sector);
+      if (ret < 0)
+        {
+          break;
+        }
+
+      /* Increment the buffer pointer by the block size */
+
+      buffer += priv->blocksize;
+    }
 #else
+  /* Use either the single- or multiple-block transfer method */
+
   if (nsectors == 1)
     {
       ret = mmcsd_writesingle(priv, buffer, startsector);
diff --git a/nuttx/net/recvfrom.c b/nuttx/net/recvfrom.c
index aabfcedfd..ee8f100bf 100644
--- a/nuttx/net/recvfrom.c
+++ b/nuttx/net/recvfrom.c
@@ -38,6 +38,7 @@
  ****************************************************************************/
 
 #include <nuttx/config.h>
+
 #ifdef CONFIG_NET
 
 #include <sys/types.h>
@@ -103,7 +104,7 @@ struct recvfrom_s
  *   pstate   recvfrom state structure
  *
  * Returned Value:
- *   None
+ *   The number of bytes taken from the packet.
  *
  * Assumptions:
  *   Running at the interrupt level
@@ -111,7 +112,8 @@ struct recvfrom_s
  ****************************************************************************/
 
 #if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP)
-static void recvfrom_newdata(struct uip_driver_s *dev, struct recvfrom_s *pstate)
+static size_t recvfrom_newdata(FAR struct uip_driver_s *dev,
+                               FAR struct recvfrom_s *pstate)
 {
   size_t recvlen;
 
@@ -137,11 +139,105 @@ static void recvfrom_newdata(struct uip_driver_s *dev, struct recvfrom_s *pstate
   pstate->rf_buffer  += recvlen;
   pstate->rf_buflen  -= recvlen;
 
+  return recvlen;
+}
+#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */
+
+/****************************************************************************
+ * Function: recvfrom_newtcpdata
+ *
+ * Description:
+ *   Copy the read data from the packet
+ *
+ * Parameters:
+ *   dev      The sructure of the network driver that caused the interrupt
+ *   pstate   recvfrom state structure
+ *
+ * Returned Value:
+ *   None.
+ *
+ * Assumptions:
+ *   Running at the interrupt level
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_NET_TCP
+static inline void recvfrom_newtcpdata(FAR struct uip_driver_s *dev,
+                                       FAR struct recvfrom_s *pstate)
+{
+  /* Take as much data from the packet as we can */
+
+  size_t recvlen = recvfrom_newdata(dev, pstate);
+
+  /* If there is more data left in the packet that we could not buffer, than
+   * add it to the read-ahead buffers.
+   */
+
+ if (recvlen < dev->d_len)
+   {
+#if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0
+      FAR struct uip_conn *conn   = (FAR struct uip_conn *)pstate->rf_sock->s_conn;
+      FAR uint8_t         *buffer = (FAR uint8_t *)dev->d_appdata + recvlen;
+      uint16_t             buflen = dev->d_len - recvlen;
+      uint16_t             nsaved;
+
+      nsaved = uip_datahandler(conn, buffer, buflen);
+
+      /* There are complicated buffering issues that are not addressed
+       * properly here.  For example, what if up_datahandler() cannot buffer
+       * the remainder of the packet?  In that case, the data will be dropped
+       * but still ACKed.  Therefore it will not be resent.  Fixing this could be
+       * tricky.
+       */
+
+#ifdef CONFIG_DEBUG_NET
+      if (nsaved < buflen)
+        {
+          ndbg("ERROR: packet data not saved (%d bytes)\n", buflen - nsaved);
+        }
+#endif
+#else
+      ndbg("ERROR: packet data lost (%d bytes)\n", dev->d_len - recvlen);
+#endif
+   }
+
   /* Indicate no data in the buffer */
 
   dev->d_len = 0;
 }
-#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */
+#endif /* CONFIG_NET_TCP */
+
+/****************************************************************************
+ * Function: recvfrom_newudpdata
+ *
+ * Description:
+ *   Copy the read data from the packet
+ *
+ * Parameters:
+ *   dev      The sructure of the network driver that caused the interrupt
+ *   pstate   recvfrom state structure
+ *
+ * Returned Value:
+ *   None.
+ *
+ * Assumptions:
+ *   Running at the interrupt level
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_NET_TCP
+static inline void recvfrom_newudpdata(FAR struct uip_driver_s *dev,
+                                       FAR struct recvfrom_s *pstate)
+{
+  /* Take as much data from the packet as we can */
+
+  (void)recvfrom_newdata(dev, pstate);
+
+  /* Indicate no data in the buffer */
+
+  dev->d_len = 0;
+}
+#endif /* CONFIG_NET_TCP */
 
 /****************************************************************************
  * Function: recvfrom_readahead
@@ -164,9 +260,9 @@ static void recvfrom_newdata(struct uip_driver_s *dev, struct recvfrom_s *pstate
 #if defined(CONFIG_NET_TCP) && CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0
 static inline void recvfrom_readahead(struct recvfrom_s *pstate)
 {
-  struct uip_conn        *conn = (struct uip_conn *)pstate->rf_sock->s_conn;
-  struct uip_readahead_s *readahead;
-  size_t                  recvlen;
+  FAR struct uip_conn        *conn = (FAR struct uip_conn *)pstate->rf_sock->s_conn;
+  FAR struct uip_readahead_s *readahead;
+  size_t                      recvlen;
 
   /* Check there is any TCP data already buffered in a read-ahead
    * buffer.
@@ -375,7 +471,7 @@ static uint16_t recvfrom_tcpinterrupt(struct uip_driver_s *dev, void *conn,
         {
           /* Copy the data from the packet */
 
-          recvfrom_newdata(dev, pstate);
+          recvfrom_newtcpdata(dev, pstate);
 
           /* Save the sender's address in the caller's 'from' location */
 
@@ -572,7 +668,7 @@ static uint16_t recvfrom_udpinterrupt(struct uip_driver_s *dev, void *pvconn,
         {
           /* Copy the data from the packet */
 
-          recvfrom_newdata(dev, pstate);
+          recvfrom_newudpdata(dev, pstate);
 
           /* We are finished. */
 
diff --git a/nuttx/net/uip/uip_internal.h b/nuttx/net/uip/uip_internal.h
index aab7408da..01c018c51 100644
--- a/nuttx/net/uip/uip_internal.h
+++ b/nuttx/net/uip/uip_internal.h
@@ -1,8 +1,8 @@
 /****************************************************************************
  * net/uip/uip_internal.h
  *
- *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Copyright (C) 2007-2009, 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * This logic was leveraged from uIP which also has a BSD-style license:
  *
@@ -154,8 +154,12 @@ EXTERN void uip_tcpinput(struct uip_driver_s *dev);
 
 /* Defined in uip_tcpcallback.c *********************************************/
 
-EXTERN uint16_t uip_tcpcallback(struct uip_driver_s *dev,
-                              struct uip_conn *conn, uint16_t flags);
+EXTERN uint16_t uip_tcpcallback(FAR struct uip_driver_s *dev,
+                                FAR struct uip_conn *conn, uint16_t flags);
+#if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0
+EXTERN uint16_t uip_datahandler(FAR struct uip_conn *conn,
+                                FAR uint8_t *buffer, uint16_t nbytes);
+#endif
 
 /* Defined in uip_tcpreadahead.c ********************************************/
 
diff --git a/nuttx/net/uip/uip_tcpcallback.c b/nuttx/net/uip/uip_tcpcallback.c
index 3f6d04c06..099c29bf3 100644
--- a/nuttx/net/uip/uip_tcpcallback.c
+++ b/nuttx/net/uip/uip_tcpcallback.c
@@ -38,6 +38,7 @@
  ****************************************************************************/
 
 #include <nuttx/config.h>
+
 #if defined(CONFIG_NET) && defined(CONFIG_NET_TCP)
 
 #include <stdint.h>
@@ -102,18 +103,19 @@ static int uip_readahead(struct uip_readahead_s *readahead, uint8_t *buf,
  * Function: uip_dataevent
  *
  * Description:
- *   This is the default data event handler that is called when there is no
- *   user data handler in place
+ *   Handle data that is not accepted by the application because there is no
+ *   listener in place ready to receive the data.
  *
  * Assumptions:
- * - The called has checked that UIP_NEWDATA is set in flags and that is no
+ * - The caller has checked that UIP_NEWDATA is set in flags and that is no
  *   other handler available to process the incoming data.
  * - This function is called at the interrupt level with interrupts disabled.
  *
  ****************************************************************************/
 
 static inline uint16_t
-uip_dataevent(struct uip_driver_s *dev, struct uip_conn *conn, uint16_t flags)
+uip_dataevent(FAR struct uip_driver_s *dev, FAR struct uip_conn *conn,
+              uint16_t flags)
 {
   uint16_t ret;
 
@@ -130,61 +132,25 @@ uip_dataevent(struct uip_driver_s *dev, struct uip_conn *conn, uint16_t flags)
   if (dev->d_len > 0)
     {
 #if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0
-      struct uip_readahead_s *readahead1;
-      struct uip_readahead_s *readahead2 = NULL;
-      uint16_t recvlen = 0;
-      uint8_t *buf     = dev->d_appdata;
-      int    buflen    = dev->d_len;
+      uint8_t *buffer = dev->d_appdata;
+      int      buflen = dev->d_len;
+      uint16_t recvlen;
 #endif
 
       nllvdbg("No listener on connection\n");
 
 #if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0
-      /* First, we need to determine if we have space to buffer the data.  This
-       * needs to be verified before we actually begin buffering the data. We
-       * will use any remaining space in the last allocated readahead buffer
-       * plus as much one additional buffer.  It is expected that the size of
-       * readahead buffers are tuned so that one full packet will always fit
-       * into one readahead buffer (for example if the buffer size is 420, then
-       * a readahead buffer of 366 will hold a full packet of TCP data).
-       */
+      /* Save as much data as possible in the read-ahead buffers */
 
-      readahead1 = (struct uip_readahead_s*)conn->readahead.tail;
-      if ((readahead1 &&
-          (CONFIG_NET_TCP_READAHEAD_BUFSIZE - readahead1->rh_nbytes) > buflen) ||
-          (readahead2 = uip_tcpreadaheadalloc()) != NULL)
-        {
-          /* We have buffer space.  Now try to append add as much data as possible
-           * to the last readahead buffer attached to this connection.
-           */
-
-          if (readahead1)
-            {
-              recvlen = uip_readahead(readahead1, buf, buflen);
-              if (recvlen > 0)
-                {
-                  buf    += recvlen;
-                  buflen -= recvlen;
-                }
-            }
+      recvlen = uip_datahandler(conn, buffer, buflen);
 
-          /* Do we need to buffer into the newly allocated buffer as well? */
-
-          if (readahead2)
-            {
-              readahead2->rh_nbytes = 0;
-              (void)uip_readahead(readahead2, buf, buflen);
-
-              /* Save the readahead buffer in the connection structure where
-               * it can be found with recv() is called.
-               */
-
-              sq_addlast(&readahead2->rh_node, &conn->readahead);
-            }
+      /* There are several complicated buffering issues that are not addressed
+       * properly here.  For example, what if we cannot buffer the entire
+       * packet?  In that case, some data will be accepted but not ACKed.
+       * Therefore it will be resent and duplicated.  Fixing this could be tricky.
+       */
 
-          nllvdbg("Buffered %d bytes\n", dev->d_len);
-        }
-      else
+     if (recvlen < buflen)
 #endif
         {
           /* There is no handler to receive new data and there are no free
@@ -286,4 +252,88 @@ uint16_t uip_tcpcallback(struct uip_driver_s *dev, struct uip_conn *conn,
   return ret;
 }
 
+/****************************************************************************
+ * Function: uip_datahandler
+ *
+ * Description:
+ *   Handle data that is not accepted by the application.  This may be called
+ *   either (1) from the data receive logic if it cannot buffer the data, or
+ *   (2) from the TCP event logic is there is no listener in place ready to
+ *   receive the data.
+ *
+ * Input Parmeters:
+ *   conn - A pointer to the TCP connection structure
+ *   buffer - A pointer to the buffer to be copied to the read-ahead
+ *     buffers
+ *   buflen - The number of bytes to copy to the read-ahead buffer.
+ *
+ * Returned value:
+ *   The number of bytes actually buffered.  This could be less than 'nbytes'
+ *   if there is insufficient buffering available.
+ *
+ * Assumptions:
+ * - The caller has checked that UIP_NEWDATA is set in flags and that is no
+ *   other handler available to process the incoming data.
+ * - This function is called at the interrupt level with interrupts disabled.
+ *
+ ****************************************************************************/
+
+#if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0
+uint16_t uip_datahandler(FAR struct uip_conn *conn, FAR uint8_t *buffer,
+                         uint16_t buflen)
+{
+  FAR struct uip_readahead_s *readahead1;
+  FAR struct uip_readahead_s *readahead2 = NULL;
+  uint16_t remaining;
+  uint16_t recvlen = 0;
+
+  /* First, we need to determine if we have space to buffer the data.  This
+   * needs to be verified before we actually begin buffering the data. We
+   * will use any remaining space in the last allocated readahead buffer
+   * plus as much one additional buffer.  It is expected that the size of
+   * readahead buffers are tuned so that one full packet will always fit
+   * into one readahead buffer (for example if the buffer size is 420, then
+   * a readahead buffer of 366 will hold a full packet of TCP data).
+   */
+
+  readahead1 = (FAR struct uip_readahead_s*)conn->readahead.tail;
+  if ((readahead1 &&
+      (CONFIG_NET_TCP_READAHEAD_BUFSIZE - readahead1->rh_nbytes) > buflen) ||
+      (readahead2 = uip_tcpreadaheadalloc()) != NULL)
+    {
+      /* We have buffer space.  Now try to append add as much data as possible
+       * to the last readahead buffer attached to this connection.
+       */
+
+      remaining = buflen;
+      if (readahead1)
+        {
+          recvlen = uip_readahead(readahead1, buffer, remaining);
+          if (recvlen > 0)
+            {
+              buffer    += recvlen;
+              remaining -= recvlen;
+            }
+        }
+
+      /* Do we need to buffer into the newly allocated buffer as well? */
+
+      if (readahead2)
+        {
+          readahead2->rh_nbytes = 0;
+          recvlen += uip_readahead(readahead2, buffer, remaining);
+
+          /* Save the readahead buffer in the connection structure where
+           * it can be found with recv() is called.
+           */
+
+          sq_addlast(&readahead2->rh_node, &conn->readahead);
+        }
+    }
+
+  nllvdbg("Buffered %d bytes (of %d)\n", recvlen, buflen);
+  return recvlen;
+}
+#endif /* CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 */
+
 #endif /* CONFIG_NET && CONFIG_NET_TCP */