diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-02-26 21:53:12 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-02-26 21:53:12 +0000 |
commit | 3ac081bae886b327cb7b818975edb3d66bd6b945 (patch) | |
tree | ae80af36ae326429683999719b543aa679c9d927 | |
parent | 0824a170e672c91b0b165015925cede117adb7f7 (diff) | |
download | px4-nuttx-3ac081bae886b327cb7b818975edb3d66bd6b945.tar.gz px4-nuttx-3ac081bae886b327cb7b818975edb3d66bd6b945.tar.bz2 px4-nuttx-3ac081bae886b327cb7b818975edb3d66bd6b945.zip |
Add an NSH configuration for the NuTiny-SDK-NUC120. Still does not work
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5678 42af7a65-404d-4744-a932-0658087f49c3
-rw-r--r-- | apps/nshlib/nsh_fscmds.c | 2 | ||||
-rw-r--r-- | nuttx/arch/Kconfig | 22 | ||||
-rw-r--r-- | nuttx/arch/arm/Kconfig | 16 | ||||
-rw-r--r-- | nuttx/arch/arm/src/nuc1xx/nuc_lowputc.c | 2 | ||||
-rw-r--r-- | nuttx/arch/arm/src/nuc1xx/nuc_serial.c | 220 | ||||
-rw-r--r-- | nuttx/arch/mips/Kconfig | 16 | ||||
-rw-r--r-- | nuttx/configs/nutiny-nuc120/nsh/Make.defs | 122 | ||||
-rw-r--r-- | nuttx/configs/nutiny-nuc120/nsh/defconfig | 628 | ||||
-rwxr-xr-x | nuttx/configs/nutiny-nuc120/nsh/setenv.sh | 75 |
9 files changed, 949 insertions, 154 deletions
diff --git a/apps/nshlib/nsh_fscmds.c b/apps/nshlib/nsh_fscmds.c index f47dca896..35d5c81bd 100644 --- a/apps/nshlib/nsh_fscmds.c +++ b/apps/nshlib/nsh_fscmds.c @@ -121,6 +121,7 @@ static char g_iobuffer[IOBUFFERSIZE]; * Name: trim_dir ****************************************************************************/ +#if !defined(CONFIG_NSH_DISABLE_CP) || defined(CONFIG_NSH_FULLPATH) static void trim_dir(char *arg) { /* Skip any trailing '/' characters (unless it is also the leading '/') */ @@ -132,6 +133,7 @@ static void trim_dir(char *arg) len--; } } +#endif /**************************************************************************** * Name: nsh_getdirpath diff --git a/nuttx/arch/Kconfig b/nuttx/arch/Kconfig index c7771e9c8..44c030fe0 100644 --- a/nuttx/arch/Kconfig +++ b/nuttx/arch/Kconfig @@ -303,12 +303,22 @@ config ARCH_RAMFUNCS comment "Board Settings" config BOARD_LOOPSPERMSEC - int "Loops per millisecond" - help - Must be calibrated for correct operation of delay loops. - You simply use a stop watch to measure the 100 second delay - then adjust CONFIG_BOARD_LOOPSPERMSEC until it is actually - is 100 seconds. + int "Delay loops per millisecond" + default 5000 + ---help--- + Simple delay loops are used by some logic, especially during boot-up, + driver initialization. These delay loops must be calibrated for each + board in order to assure accurate timing by the delay loops. + +config ARCH_CALIBRATION + bool "Calibrate delay loop" + default n + ---help--- + Enables some built in instrumentation that causes a 100 second delay + during boot-up. This 100 second delay serves no purpose other than it + allows you to calibratre BOARD_LOOPSPERMSEC. You simply use a stop + watch to measure the actual delay then adjust BOARD_LOOPSPERMSEC until + the actual delay is 100 seconds. config DRAM_START hex "DRAM start physical address" diff --git a/nuttx/arch/arm/Kconfig b/nuttx/arch/arm/Kconfig index f25b68981..869ed74c5 100644 --- a/nuttx/arch/arm/Kconfig +++ b/nuttx/arch/arm/Kconfig @@ -251,22 +251,6 @@ config PAGING If set =y in your configation file, this setting will enable the on-demand paging feature as described in http://www.nuttx.org/NuttXDemandPaging.html. -config BOARD_LOOPSPERMSEC - int "Delay loops per millisecond" - default 5000 - ---help--- - Delay loops nust be calibrated for correct operation. - -config ARCH_CALIBRATION - bool "Calibrate delay loop" - default n - ---help--- - Enables some built in instrumentation that causes a 100 second delay - during boot-up. This 100 second delay serves no purpose other than it - allows you to calibratre BOARD_LOOPSPERMSEC. You simply use a stop - watch to measure the 100 second delay then adjust BOARD_LOOPSPERMSEC until - the delay actually is 100 seconds. - config DEBUG_HARDFAULT bool "Verbose Hard-Fault Debug" default n diff --git a/nuttx/arch/arm/src/nuc1xx/nuc_lowputc.c b/nuttx/arch/arm/src/nuc1xx/nuc_lowputc.c index 0855594fe..b9fdb0ef6 100644 --- a/nuttx/arch/arm/src/nuc1xx/nuc_lowputc.c +++ b/nuttx/arch/arm/src/nuc1xx/nuc_lowputc.c @@ -299,7 +299,7 @@ void nuc_lowsetup(void) #endif #if NUC_CONSOLE_2STOP != 0 - revgval |= UART_LCR_NSB; + regval |= UART_LCR_NSB; #endif putreg32(regval, NUC_CONSOLE_BASE + NUC_UART_LCR_OFFSET); diff --git a/nuttx/arch/arm/src/nuc1xx/nuc_serial.c b/nuttx/arch/arm/src/nuc1xx/nuc_serial.c index 6f095826c..fce9ea967 100644 --- a/nuttx/arch/arm/src/nuc1xx/nuc_serial.c +++ b/nuttx/arch/arm/src/nuc1xx/nuc_serial.c @@ -242,86 +242,64 @@ static uart_dev_t g_uart2port = }; #endif /* CONFIG_NUC_UART2 */ -/* Which UART with be tty0/console and which tty1? tty2? */ +/* Which UART with be tty0/console and which tty1? tty2? The console, if it + * exists, will always be ttyS0. If there is no console then will use the + * lowest numbered UART. + */ -#ifdef HAVE_CONSOLE -# if defined(CONFIG_UART0_SERIAL_CONSOLE) -# define CONSOLE_DEV g_uart0port /* UART0=console */ -# define TTYS0_DEV g_uart0port /* UART0=ttyS0 */ -# ifdef CONFIG_NUC_UART1 -# define TTYS1_DEV g_uart1port /* UART0=ttyS0;UART1=ttyS1 */ -# ifdef CONFIG_NUC_UART2 -# define TTYS2_DEV g_uart2port /* UART0=ttyS0;UART1=ttyS1;UART2=ttyS2 */ -# else -# undef TTYS2_DEV /* UART0=ttyS0;UART1=ttyS1;No ttyS2*/ -# endif -# else -# ifdef CONFIG_NUC_UART2 -# define TTYS1_DEV g_uart2port /* UART0=ttyS0;UART2=ttyS1 */ -# undef TTYS2_DEV /* UART0=ttyS0;UART2=ttyS1;No ttyS2*/ -# else -# undef TTYS1_DEV /* UART0=ttyS0;No ttyS1;No ttyS2 */ -# undef TTYS2_DEV /* No ttyS2 */ -# endif -# endif -# elif defined(CONFIG_UART1_SERIAL_CONSOLE) -# define CONSOLE_DEV g_uart1port /* UART1=console */ -# define TTYS0_DEV g_uart1port /* UART1=ttyS0 */ -# ifdef CONFIG_NUC_UART0 -# define TTYS1_DEV g_uart0port /* UART1=ttyS0;UART0=ttyS1 */ -# ifdef CONFIG_NUC_UART2 -# define TTYS2_DEV g_uart2port /* UART1=ttyS0;UART0=ttyS1;UART2=ttyS2 */ -# else -# undef TTYS2_DEV /* UART1=ttyS0;UART0=ttyS1;No ttyS2 */ -# endif -# else -# ifdef CONFIG_NUC_UART2 -# define TTYS1_DEV g_uart2port /* UART1=ttyS0;UART2=ttyS1 */ -# undef TTYS2_DEV /* UART1=ttyS0;UART2=ttyS1;No ttyS2 */ -# else -# undef TTYS1_DEV /* UART1=ttyS0;No ttyS1;No ttyS2 */ -# undef TTYS2_DEV /* No ttyS2 */ -# endif -# endif -# elif defined(CONFIG_UART2_SERIAL_CONSOLE) -# define CONSOLE_DEV g_uart2port /* UART2=console */ -# define TTYS0_DEV g_uart2port /* UART2=ttyS0 */ -# ifdef CONFIG_NUC_UART2 -# define TTYS1_DEV g_uart0port /* UART2=ttyS0;UART0=ttyS1 */ -# ifdef CONFIG_NUC_UART1 -# define TTYS2_DEV g_uart1port /* UART2=ttyS0;UART0=ttyS1;UART1=ttyS2 */ -# else -# undef TTYS2_DEV /* UART2=ttyS0;UART0=ttyS1;No ttyS2 */ -# endif -# else -# ifdef CONFIG_NUC_UART1 -# define TTYS1_DEV g_uart1port /* UART2=ttyS0;UART1=ttyS1 */ -# undef TTYS2_DEV /* UART2=ttyS0;UART1=ttyS1;No ttyS2 */ -# else -# undef TTYS1_DEV /* UART2=ttyS0;No ttyS1;No ttyS2 */ -# undef TTYS2_DEV /* No ttyS2 */ -# endif -# endif -# endif -#else /* No console */ -# define TTYS0_DEV g_uart0port /* UART0=ttyS0 */ -# ifdef CONFIG_NUC_UART1 -# define TTYS1_DEV g_uart1port /* UART0=ttyS0;UART1=ttyS1 */ -# ifdef CONFIG_NUC_UART2 -# define TTYS2_DEV g_uart2port /* UART0=ttyS0;UART1=ttyS1;UART2=ttyS2 */ -# else -# undef TTYS2_DEV /* UART0=ttyS0;UART1=ttyS1;No ttyS2 */ -# endif -# else -# ifdef CONFIG_NUC_UART2 -# define TTYS1_DEV g_uart2port /* UART0=ttyS0;UART2=ttyS1 */ -# undef TTYS2_DEV /* UART0=ttyS0;UART2=ttyS1;No ttyS2 */ -# else -# undef TTYS1_DEV /* UART0=ttyS0;No ttyS1;No ttyS2 */ -# undef TTYS2_DEV /* No ttyS2 */ -# endif +/* First pick the console and ttys0. This could be any of UART0-2 */ + +#if defined(CONFIG_UART0_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart0port /* UART0 is console */ +# define TTYS0_DEV g_uart0port /* UART0 is ttyS0 */ +# define UART0_ASSIGNED 1 +#elif defined(CONFIG_UART1_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart1port /* UART1 is console */ +# define TTYS0_DEV g_uart1port /* UART1 is ttyS0 */ +# define UART1_ASSIGNED 1 +#elif defined(CONFIG_UART2_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart2port /* UART2 is console */ +# define TTYS0_DEV g_uart2port /* UART2 is ttyS0 */ +# define UART2_ASSIGNED 1 +#else +# undef CONSOLE_DEV /* No console */ +# if defined(CONFIG_NUC_UART0) +# define TTYS0_DEV g_uart0port /* UART0 is ttyS0 */ +# define UART0_ASSIGNED 1 +# elif defined(CONFIG_NUC_UART1) +# define TTYS0_DEV g_uart1port /* UART1 is ttyS0 */ +# define UART1_ASSIGNED 1 +# elif defined(CONFIG_NUC_UART2) +# define TTYS0_DEV g_uart2port /* UART2 is ttyS0 */ +# define UART2_ASSIGNED 1 # endif -#endif /* HAVE_CONSOLE */ +#endif + +/* Pick ttys1. This could be any two of UART0-2 excluding the console UART. */ + +#if defined(CONFIG_NUC_UART0) && !defined(UART0_ASSIGNED) +# define TTYS1_DEV g_uart0port /* UART0 is ttyS1 */ +# define UART0_ASSIGNED 1 +#elif defined(CONFIG_NUC_UART1) && !defined(UART1_ASSIGNED) +# define TTYS1_DEV g_uart1port /* UART1 is ttyS1 */ +# define UART1_ASSIGNED 1 +#elif defined(CONFIG_NUC_UART2) && !defined(UART2_ASSIGNED) +# define TTYS1_DEV g_uart2port /* UART2 is ttyS1 */ +# define UART2_ASSIGNED 1 +#endif + +/* Pick ttys2. This could be one of UART1-2. It can't be UART0 because that + * was either assigned as ttyS0 or ttys1. One of UART 1-2 could also be the + * console. + */ + +#if defined(CONFIG_NUC_UART1) && !defined(UART1_ASSIGNED) +# define TTYS2_DEV g_uart1port /* UART1 is ttyS2 */ +# define UART1_ASSIGNED 1 +#elif defined(CONFIG_NUC_UART2) && !defined(UART2_ASSIGNED) +# define TTYS2_DEV g_uart2port /* UART2 is ttyS2 */ +# define UART2_ASSIGNED 1 +#endif /**************************************************************************** * Inline Functions @@ -391,46 +369,61 @@ static int up_setup(struct uart_dev_s *dev) /* Reset the TX FIFO */ - regval = up_serialin(priv, NUC_UART_FCR_OFFSET - regval |= UART_FCR_TFR - up_serialout(priv, NUC_UART_FCR_OFFSET, regval); + regval = up_serialin(priv, NUC_UART_FCR_OFFSET); + up_serialout(priv, NUC_UART_FCR_OFFSET, regval | UART_FCR_TFR); /* Reset the RX FIFO */ - regval = up_serialin(priv, NUC_UART_FCR_OFFSET - regval |= UART_FCR_RFR - up_serialout(priv, NUC_UART_FCR_OFFSET, regval); + up_serialout(priv, NUC_UART_FCR_OFFSET, regval | UART_FCR_RFR); /* Set Rx Trigger Level */ - regval &= ~UART_FCR_FRITL_MASK; + regval &= ~(UART_FCR_FRITL_MASK | UART_FCR_TFR | UART_FCR_RFR); regval |= UART_FCR_FRITL_4; up_serialout(priv, NUC_UART_FCR_OFFSET, regval); /* Set Parity & Data bits and Stop bits */ regval = 0; -#if NUC_CONSOLE_BITS == 5 - regval |= UART_LCR_WLS_5; -#elif NUC_CONSOLE_BITS == 6 - regval |= UART_LCR_WLS_6; -#elif NUC_CONSOLE_BITS == 7 - regval |= UART_LCR_WLS_7; -#elif NUC_CONSOLE_BITS == 8 - regval |= UART_LCR_WLS_8; -#else - error "Unknown console UART data width" -#endif + switch (priv->bits) + { + case 5: + regval |= UART_LCR_WLS_5; + break; -#if NUC_CONSOLE_PARITY == 1 - regval |= UART_LCR_PBE; -#elif NUC_CONSOLE_PARITY == 2 - regval |= (UART_LCR_PBE | UART_LCR_EPE); -#endif + case 6: + regval |= UART_LCR_WLS_6; + break; -#if NUC_CONSOLE_2STOP != 0 - revgval |= UART_LCR_NSB; -#endif + case 7: + regval |= UART_LCR_WLS_7; + break; + + default: + case 8: + regval |= UART_LCR_WLS_8; + break; + } + + switch (priv->parity) + { + default: + case 0: + break; + + case 1: + regval |= UART_LCR_PBE; + break; + + case 2: + regval |= (UART_LCR_PBE | UART_LCR_EPE); + break; + } + + if (priv->stopbits2) + { + regval |= UART_LCR_NSB; + } up_serialout(priv, NUC_UART_LCR_OFFSET, regval); @@ -441,7 +434,7 @@ static int up_setup(struct uart_dev_s *dev) /* Set the baud */ - nuc_setbaud(CONSOLE_BASE, CONSOLE_BAUD); + nuc_setbaud(priv->uartbase, priv->baud); /* Set up the IER */ @@ -597,28 +590,25 @@ static int up_interrupt(int irq, void *context) { /* REVISIT: Do we clear this be reading the modem status register? */ - volatile uint32_t status = up_serialin(priv, NUC_UART_MSR_OFFSET); - vdbg("MSR: %08x\n", status); + (void)up_serialin(priv, NUC_UART_MSR_OFFSET); } /* Check for line status */ if ((status & UART_ISR_RLS_INT) != 0) { - /* REVISIT: Do we clear this be reading the line status register? */ + /* REVISIT: Do we clear this be reading the FIFO status register? */ - volatile uint32_t status = up_serialin(priv, NUC_UART_FSR_OFFSET); - vdbg("LSR: %08x\n", status); + (void)up_serialin(priv, NUC_UART_FSR_OFFSET); } /* Check for buffer errors */ if ((status & UART_ISR_BUF_ERR_INT) != 0) { - /* REVISIT: Do we clear this be reading the line status register? */ + /* REVISIT: Do we clear this by reading the FIFO status register? */ - volatile uint32_t status = up_serialin(priv, NUC_UART_MSR_OFFSET); - vdbg("MSR: %08x\n", status); + (void)up_serialin(priv, NUC_UART_FSR_OFFSET); } } @@ -651,7 +641,7 @@ static int up_ioctl(struct file *filep, int cmd, unsigned long arg) } else { - memcpy(user, dev, sizeof(struct nuc_dev_s)); + memcpy(user, priv, sizeof(struct nuc_dev_s)); } } break; @@ -754,7 +744,7 @@ static void up_rxint(struct uart_dev_s *dev, bool enable) { #ifndef CONFIG_SUPPRESS_SERIAL_INTS priv->ier |= (UART_IER_RDA_IEN | UART_IER_RLS_IEN | UART_IER_RTO_IEN | - UART_IER_BUF_ERR_IEN UART_IER_TIME_OUT_EN); + UART_IER_BUF_ERR_IEN | UART_IER_TIME_OUT_EN); #endif } else diff --git a/nuttx/arch/mips/Kconfig b/nuttx/arch/mips/Kconfig index 86482ef7a..5a9a1cd9f 100644 --- a/nuttx/arch/mips/Kconfig +++ b/nuttx/arch/mips/Kconfig @@ -32,22 +32,6 @@ config ARCH_CHIP string default "pic32mx" if ARCH_CHIP_PIC32MX -config BOARD_LOOPSPERMSEC - int "Delay loops per millisecond" - default 5000 - ---help--- - Delay loops nust be calibrated for correct operation. - -config ARCH_CALIBRATION - bool "Calibrate delay loop" - default n - ---help--- - Enables some built in instrumentation that causes a 100 second delay - during boot-up. This 100 second delay serves no purpose other than it - allows you to calibratre BOARD_LOOPSPERMSEC. You simply use a stop - watch to measure the 100 second delay then adjust BOARD_LOOPSPERMSEC until - the delay actually is 100 seconds. - source arch/mips/src/common/Kconfig source arch/mips/src/mips32/Kconfig source arch/mips/src/pic32mx/Kconfig diff --git a/nuttx/configs/nutiny-nuc120/nsh/Make.defs b/nuttx/configs/nutiny-nuc120/nsh/Make.defs new file mode 100644 index 000000000..bf435b424 --- /dev/null +++ b/nuttx/configs/nutiny-nuc120/nsh/Make.defs @@ -0,0 +1,122 @@ +############################################################################ +# configs/nutiny-nuc120/nsh/Make.defs +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv6-m/Toolchain.defs + +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" + MAXOPTIMIZATION = -O2 +else + # Linux/Cygwin-native toolchain + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = +ifeq ($(CONFIG_HOST_WINDOWS),y) + HOSTEXEEXT = .exe +else + HOSTEXEEXT = +endif + +ifeq ($(WINTOOL),y) + # Windows-native host tools + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh +else + # Linux/Cygwin-native host tools + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) +endif + diff --git a/nuttx/configs/nutiny-nuc120/nsh/defconfig b/nuttx/configs/nutiny-nuc120/nsh/defconfig new file mode 100644 index 000000000..72d120bfc --- /dev/null +++ b/nuttx/configs/nutiny-nuc120/nsh/defconfig @@ -0,0 +1,628 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +CONFIG_ARCH_CHIP_NUC1XX=y +# CONFIG_ARCH_CHIP_SAM3U is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM0=y +CONFIG_ARCH_FAMILY="armv6-m" +CONFIG_ARCH_CHIP="nuc1xx" +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARCH_HAVE_MPU is not set + +# +# ARMV6M Configuration Options +# +# CONFIG_ARMV6M_TOOLCHAIN_ATOLLIC is not set +CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV6M_TOOLCHAIN_CODEREDW is not set +# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW is not set +# CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI is not set + +# +# NUC100/120 Configuration Options +# +# CONFIG_ARCH_CHIP_NUC100LC1BN is not set +# CONFIG_ARCH_CHIP_NUC100LD1BN is not set +# CONFIG_ARCH_CHIP_NUC100LD2BN is not set +# CONFIG_ARCH_CHIP_NUC100RC1BN is not set +# CONFIG_ARCH_CHIP_NUC100RD1BN is not set +# CONFIG_ARCH_CHIP_NUC100RD2BN is not set +# CONFIG_ARCH_CHIP_NUC100LD3AN is not set +# CONFIG_ARCH_CHIP_NUC100LE3AN is not set +# CONFIG_ARCH_CHIP_NUC100RD3AN is not set +# CONFIG_ARCH_CHIP_NUC100RE3AN is not set +# CONFIG_ARCH_CHIP_NUC100VD2AN is not set +# CONFIG_ARCH_CHIP_NUC100VD3AN is not set +# CONFIG_ARCH_CHIP_NUC100VE3AN is not set +# CONFIG_ARCH_CHIP_NUC120LC1BN is not set +# CONFIG_ARCH_CHIP_NUC120LD1BN is not set +# CONFIG_ARCH_CHIP_NUC120LD2BN is not set +# CONFIG_ARCH_CHIP_NUC120RC1BN is not set +# CONFIG_ARCH_CHIP_NUC120RD1BN is not set +# CONFIG_ARCH_CHIP_NUC120RD2BN is not set +# CONFIG_ARCH_CHIP_NUC120LD3AN is not set +CONFIG_ARCH_CHIP_NUC120LE3AN=y +# CONFIG_ARCH_CHIP_NUC120RD3AN is not set +# CONFIG_ARCH_CHIP_NUC120RE3AN is not set +# CONFIG_ARCH_CHIP_NUC120VD2AN is not set +# CONFIG_ARCH_CHIP_NUC120VD3AN is not set +# CONFIG_ARCH_CHIP_NUC120VE3AN is not set +CONFIG_ARCH_FAMILY_NUC120=y +CONFIG_ARCH_NUC_MEDIUMDENSITY=y + +# +# NUC1XX Peripheral Support +# +# CONFIG_NUC_PDMA is not set +# CONFIG_NUC_FMC is not set +# CONFIG_NUC_EBI is not set +# CONFIG_NUC_WDT is not set +# CONFIG_NUC_RTC is not set +# CONFIG_NUC_TMR0 is not set +# CONFIG_NUC_TMR1 is not set +# CONFIG_NUC_TIMR2 is not set +# CONFIG_NUC_TIMR3 is not set +# CONFIG_NUC_I2C0 is not set +# CONFIG_NUC_I2C1 is not set +# CONFIG_NUC_SPI0 is not set +# CONFIG_NUC_SPI1 is not set +# CONFIG_NUC_SPI2 is not set +# CONFIG_NUC_SPI3 is not set +# CONFIG_NUC_PWM0 is not set +# CONFIG_NUC_PWM1 is not set +# CONFIG_NUC_PWM2 is not set +# CONFIG_NUC_PWM3 is not set +# CONFIG_NUC_PWM4 is not set +# CONFIG_NUC_PWM5 is not set +# CONFIG_NUC_PWM6 is not set +# CONFIG_NUC_PWM7 is not set +# CONFIG_NUC_UART0 is not set +CONFIG_NUC_UART1=y +# CONFIG_NUC_USBD is not set +# CONFIG_NUC_ACMP is not set +# CONFIG_NUC_ADC is not set +# CONFIG_NUC_PS2 is not set +# CONFIG_NUC_I2S is not set +CONFIG_NUC_INTHI=y +CONFIG_NUC_SYSTICK_XTALHI=y +# CONFIG_NUC_SYSTICK_XTALLO is not set +# CONFIG_NUC_SYSTICK_XTALHId2 is not set +# CONFIG_NUC_SYSTICK_HCLKd2 is not set +# CONFIG_NUC_SYSTICK_INTHId2 is not set +# CONFIG_NUC_UARTCLK_XTALHI is not set +# CONFIG_NUC_UARTCLK_PLL is not set +CONFIG_NUC_UARTCLK_INTHI=y + +# +# External Memory Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=2988 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=16384 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_NUTINY_NUC120=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="nutiny-nuc120" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2013 +CONFIG_START_MONTH=2 +CONFIG_START_DAY=26 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WORKQUEUE is not set +CONFIG_SCHED_WAITPID=y +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +CONFIG_DISABLE_POSIX_TIMERS=y +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_ENVIRON=y + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=8 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=0 +CONFIG_NFILE_DESCRIPTORS=6 +CONFIG_NFILE_STREAMS=6 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=0 +CONFIG_MQ_MAXMSGSIZE=0 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=0 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1536 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=1536 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART1=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART1_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART1 Configuration +# +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART1_BAUD=115200 +CONFIG_UART1_BITS=8 +CONFIG_UART1_PARITY=0 +CONFIG_UART1_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_FS_RAMMAP is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +CONFIG_MM_SMALL=y +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +CONFIG_BINFMT_DISABLE=y +# CONFIG_PIC is not set +CONFIG_SYMTAB_ORDEREDBYNAME=y + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=0 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=0 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Helper Functions +# +# CONFIG_LIB_KBDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +CONFIG_NSH_DISABLE_CD=y +CONFIG_NSH_DISABLE_CP=y +CONFIG_NSH_DISABLE_DD=y +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +CONFIG_NSH_DISABLE_GET=y +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +CONFIG_NSH_DISABLE_IFCONFIG=y +# CONFIG_NSH_DISABLE_KILL is not set +CONFIG_NSH_DISABLE_LOSETUP=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +CONFIG_NSH_DISABLE_MKDIR=y +CONFIG_NSH_DISABLE_MKFATFS=y +# CONFIG_NSH_DISABLE_MKFIFO is not set +CONFIG_NSH_DISABLE_MKRD=y +# CONFIG_NSH_DISABLE_MH is not set +CONFIG_NSH_DISABLE_MOUNT=y +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_NSFMOUNT=y +# CONFIG_NSH_DISABLE_PS is not set +CONFIG_NSH_DISABLE_PING=y +CONFIG_NSH_DISABLE_PUT=y +# CONFIG_NSH_DISABLE_PWD is not set +CONFIG_NSH_DISABLE_RM=y +CONFIG_NSH_DISABLE_RMDIR=y +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +CONFIG_NSH_DISABLE_UMOUNT=y +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +CONFIG_NSH_DISABLE_WGET=y +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=80 +CONFIG_NSH_NESTDEPTH=3 +CONFIG_NSH_DISABLESCRIPT=y +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y + +# +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# diff --git a/nuttx/configs/nutiny-nuc120/nsh/setenv.sh b/nuttx/configs/nutiny-nuc120/nsh/setenv.sh new file mode 100755 index 000000000..49edb7f30 --- /dev/null +++ b/nuttx/configs/nutiny-nuc120/nsh/setenv.sh @@ -0,0 +1,75 @@ +#!/bin/bash +# configs/nutiny-nuc120/nsh/setenv.sh +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the RIDE +# toolchain under windows. You will also have to edit this if you install +# the RIDE toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" |