configs/compal_e88 converted to use the kconfig-frontends tools

9 files changed, 697 insertions, 342 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index c809d48ae..9eabcb88a 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -5659,4 +5659,6 @@
 	  code complete and readay for test (2013-9-27)
 	* configs/compal_e86: Basic board support for the Motorola C139
 	  (Compal E86) phone.  From Craig Comstock (2013-9-27).
+	* configs/compal_e86: Converted to use the kconfig-frontends
+	  tools (2013-9-27).
 
diff --git a/nuttx/Documentation/README.html b/nuttx/Documentation/README.html
index f2cb00c80..ca20ff933 100644
--- a/nuttx/Documentation/README.html
+++ b/nuttx/Documentation/README.html
@@ -56,6 +56,8 @@
  |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/c5471evm/README.txt"><b><i>README.txt</i></b></a>
  |   |   |- cloudctrl/
  |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/cloudctrl/README.txt"><b><i>README.txt</i></b></a>
+ |   |   |- compal_e86/
+ |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/compal_e86/README.txt"><b><i>README.txt</i></b></a>
  |   |   |- compal_e88/
  |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/compal_e88/README.txt"><b><i>README.txt</i></b></a>
  |   |   |- compal_e99/
diff --git a/nuttx/README.txt b/nuttx/README.txt
index 6d5663852..69ab3880a 100644
--- a/nuttx/README.txt
+++ b/nuttx/README.txt
@@ -985,6 +985,8 @@ nuttx
  |   |   `- README.txt
  |   |- cloudctrl
  |   |   `- README.txt
+ |   |- compal_e86
+ |   |   `- README.txt
  |   |- compal_e88
  |   |   `- README.txt
  |   |- compal_e99
diff --git a/nuttx/arch/arm/src/calypso/calypso_spi.c b/nuttx/arch/arm/src/calypso/calypso_spi.c
index fda4415c2..881d66da2 100644
--- a/nuttx/arch/arm/src/calypso/calypso_spi.c
+++ b/nuttx/arch/arm/src/calypso/calypso_spi.c
@@ -41,6 +41,7 @@
 #include <nuttx/spi/spi.h>
 
 #include <unistd.h>
+#include <semaphore.h>
 #include <debug.h>
 
 #include "up_arch.h"
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig
index 3a9672204..2a88360e7 100644
--- a/nuttx/configs/Kconfig
+++ b/nuttx/configs/Kconfig
@@ -60,12 +60,20 @@ config ARCH_BOARD_CLOUDCTRL
 		Small network relay development board. Based on the Shenzhou IV development 
 		board design.
 
+config ARCH_BOARD_COMPALE86
+	bool "Compal e86 phone"
+	depends on ARCH_CHIP_CALYPSO
+	---help---
+		This configuration enables board support for Compal e86 phone.
+		This port derives from the Compal E88 port and was provided by Craig
+		Comstock.
+
 config ARCH_BOARD_COMPALE88
 	bool "Compal e88 phone"
 	depends on ARCH_CHIP_CALYPSO
 	---help---
-		These directories contain the board support for compal e88 and e99 phones.
-		These ports are based on patches contributed by Denis Carikli for both the
+		This configuration enables board support for compal e88 phone.
+		This ports is based on patches contributed by Denis Carikli for both the
 		compal e99 and e88.  The patches were made by Alan Carvalho de Assis and
 		Denis Carikli using the Stefan Richter's Osmocom-bb patches.
 
@@ -73,8 +81,8 @@ config ARCH_BOARD_COMPALE99
 	bool "Compal e99 phone"
 	depends on ARCH_CHIP_CALYPSO
 	---help---
-		These directories contain the board support for compal e88 and e99 phones.
-		These ports are based on patches contributed by Denis Carikli for both the
+		This configuration enables board support for compal e88 and e99 phones.
+		This port is based on patches contributed by Denis Carikli for both the
 		compal e99 and e88.  The patches were made by Alan Carvalho de Assis and
 		Denis Carikli using the Stefan Richter's Osmocom-bb patches.
 
@@ -773,6 +781,7 @@ config ARCH_BOARD
 	default "arduino-due"         if ARCH_BOARD_ARDUINO_DUE
 	default "avr32dev1"           if ARCH_BOARD_AVR32DEV1
 	default "c5471evm"            if ARCH_BOARD_C5471EVM
+	default "compal_e86"          if ARCH_BOARD_COMPALE86
 	default "compal_e88"          if ARCH_BOARD_COMPALE88
 	default "compal_e99"          if ARCH_BOARD_COMPALE99
 	default "demo9s12ne64"        if ARCH_BOARD_DEMOS92S12NEC64
@@ -915,6 +924,9 @@ endif
 if ARCH_BOARD_C5471EVM
 source "configs/c5471evm/Kconfig"
 endif
+if ARCH_BOARD_COMPALE86
+source "configs/compal_e86/Kconfig"
+endif
 if ARCH_BOARD_COMPALE88
 source "configs/compal_e88/Kconfig"
 endif
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt
index d4610c894..845ed5251 100644
--- a/nuttx/configs/README.txt
+++ b/nuttx/configs/README.txt
@@ -1726,11 +1726,12 @@ configs/cloudctrl
   board. Based on the Shenzhou IV development board design.  It is based on
   the STM32F107VC MCU.
 
-configs/compal_e88 and compal_e99
-  These directories contain the board support for compal e88 and e99 phones.
+configs/compal_e86, compal_e88 and compal_e99
+  These directories contain the board support for compal e86, e88 and e99 phones.
   These ports are based on patches contributed by Denis Carikli for both the
   compal e99 and e88.  The patches were made by Alan Carvalho de Assis and
-  Denis Carikli using the Stefan Richter's Osmocom-bb patches.
+  Denis Carikli using the Stefan Richter's Osmocom-bb patches.  The variant
+  for the e86 was submitted by Craig Comstock.
 
 configs/demo9s12ne64
   Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu.  This
diff --git a/nuttx/configs/compal_e86/nsh_highram/Make.defs b/nuttx/configs/compal_e86/nsh_highram/Make.defs
index 31e729e31..0ed3d6cb4 100644
--- a/nuttx/configs/compal_e86/nsh_highram/Make.defs
+++ b/nuttx/configs/compal_e86/nsh_highram/Make.defs
@@ -35,95 +35,101 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -I "${shell cygpath -w $(OSMODIR)/src/shared/libosmocore/include} -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -I "${shell cygpath -w $(OSMODIR)/src/shared/libosmocore/include} -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+  MAXOPTIMIZATION = -O2
+
+ifeq ("${CONFIG_SERCOMM_CONSOLE}","y")
+  OSMODIR = "${shell cygpath -w $(TOPDIR)/../../osmocom-bb}
+  EXTRA_LIBS = "${shell cygpath -w $(OSMODIR)/src/target/firmware/comm/libcomm.a} \
+    "${shell cygpath -w $(OSMODIR)/src/shared/libosmocore/build-target/src/.libs/libosmocore.a} \
+    "${shell cygpath -w $(OSMODIR)/src/target/firmware/calypso/libcalypso.a} \
+    "${shell cygpath -w $(OSMODIR)/src/target/firmware/comm/libcomm.a}
+  # ^^^ Stupid hack! Why do I have to put it twice???
+endif
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHINCLUDES = -I. -I$(OSMODIR)/src/shared/libosmocore/include -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -I$(OSMODIR)/src/shared/libosmocore/include -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 
 ifeq ("${CONFIG_SERCOMM_CONSOLE}","y")
-OSMODIR			= $(TOPDIR)/../../osmocom-bb
-EXTRA_LIBS		= $(OSMODIR)/src/target/firmware/comm/libcomm.a \
-			  $(OSMODIR)/src/shared/libosmocore/build-target/src/.libs/libosmocore.a \
-			  $(OSMODIR)/src/target/firmware/calypso/libcalypso.a \
-			  $(OSMODIR)/src/target/firmware/comm/libcomm.a
-			# ^^^ Stupid hack! Why do I have to put it twice???
+  OSMODIR = $(TOPDIR)/../../osmocom-bb
+  EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \
+    $(OSMODIR)/src/shared/libosmocore/build-target/src/.libs/libosmocore.a \
+    $(OSMODIR)/src/target/firmware/calypso/libcalypso.a \
+    $(OSMODIR)/src/target/firmware/comm/libcomm.a
+  # ^^^ Stupid hack! Why do I have to put it twice???
+endif
 endif
 
-CROSSDEV		= arm-elf-
-CC			= $(CROSSDEV)gcc
-CPP			= $(CROSSDEV)gcc -E
-LD			= $(CROSSDEV)ld
-AR			= $(CROSSDEV)ar rcs
-NM			= $(CROSSDEV)nm
-OBJCOPY			= $(CROSSDEV)objcopy
-OBJDUMP			= $(CROSSDEV)objdump
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
 
-ARCHCCVERSION		= ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
-ARCHCCMAJOR		= ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
 
 ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
-  ARCHOPTIMIZATION	= -g
+  ARCHOPTIMIZATION = -g
 else
-  ARCHOPTIMIZATION	= -Os -fno-strict-aliasing -fno-strength-reduce \
-			  -fomit-frame-pointer
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
 endif
 
 ifeq ($(ARCHCCMAJOR),4)
-  ARCHCPUFLAGS		= -mcpu=arm7tdmi -mfloat-abi=soft -fno-builtin
+  ARCHCPUFLAGS = -mcpu=arm7tdmi -mfloat-abi=soft -fno-builtin
 else
-  ARCHCPUFLAGS		= -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin
+  ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin
 endif
-ARCHPICFLAGS		= -fpic -msingle-pic-base -mpic-register=r10
-ARCHWARNINGS		= -Wall -Wstrict-prototypes -Wshadow
-ARCHDEFINES		=
-ARCHINCLUDES		= -I. -I$(OSMODIR)/src/shared/libosmocore/include -isystem $(TOPDIR)/include
-ARCHSCRIPT		= -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
-
-CFLAGS			= $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
-			  $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CPICFLAGS		= $(ARCHPICFLAGS) $(CFLAGS)
-CPPFLAGS		= $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
-AFLAGS			= $(CFLAGS) -D__ASSEMBLY__
-
-NXFLATLDFLAGS1		= -r -d -warn-common
-NXFLATLDFLAGS2		= $(NXFLATLDFLAGS1) \
-			  -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld \
-			  -no-check-sections
-LDNXFLATFLAGS		= -e main -s 2048
-
-OBJEXT			= .o
-LIBEXT			= .a
-EXEEXT			=
 
-ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
-  LDFLAGS		+= -g
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 
-define PREPROCESS
-	@echo "CPP: $1->$2"
-	@$(CPP) $(CPPFLAGS) $1 -o $2
-endef
-
-define COMPILE
-	@echo "CC: $1"
-	@$(CC) -c $(CFLAGS) $1 -o $2
-endef
-
-define ASSEMBLE
-	@echo "AS: $1"
-	@$(CC) -c $(AFLAGS) $1 -o $2
-endef
-
-define ARCHIVE
-	echo "AR: $2"; \
-	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
-endef
-
-define CLEAN
-	@rm -f *.o *.a
-endef
-
-MKDEP			= $(TOPDIR)/tools/mkdeps.sh
-
-HOSTCC			= gcc
-HOSTINCLUDES		= -I.
-HOSTCFLAGS		= -Wall -wstrict-prototypes -Wshadow -g -pipe
-HOSTLDFLAGS		=
-
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
 
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
diff --git a/nuttx/configs/compal_e86/nsh_highram/appconfig b/nuttx/configs/compal_e86/nsh_highram/appconfig
deleted file mode 100644
index dd189fa1f..000000000
--- a/nuttx/configs/compal_e86/nsh_highram/appconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-############################################################################
-# configs/compal_e88/nsh_highram/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# NSH shell
-CONFIGURED_APPS += examples/nsh
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-
-# Path to example in apps/examples
-CONFIGURED_APPS += examples/hello
-CONFIGURED_APPS += vsn/poweroff
diff --git a/nuttx/configs/compal_e86/nsh_highram/defconfig b/nuttx/configs/compal_e86/nsh_highram/defconfig
index edd0bb6fc..63a072e62 100644
--- a/nuttx/configs/compal_e86/nsh_highram/defconfig
+++ b/nuttx/configs/compal_e86/nsh_highram/defconfig
@@ -1,173 +1,232 @@
-############################################################################
-# configs/c5471evm/nsh/defconfig
-#
-#   Copyright (C) 2007-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
 CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+CONFIG_ARCH_CHIP_CALYPSO=y
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
 CONFIG_ARCH_ARM7TDMI=y
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM4 is not set
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="arm"
 CONFIG_ARCH_CHIP="calypso"
-CONFIG_ARCH_CHIP_CALYPSO=y
-CONFIG_ARCH_BOARD="compal_e86"
-CONFIG_ARCH_BOARD_COMPALE88=y
-CONFIG_BOARD_LOOPSPERMSEC=1250
-CONFIG_ROM_VECTORS=n
-CONFIG_ARCH_LEDS=n
-CONFIG_ARCH_INTERRUPTSTACK=1024
-CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ARCH_HAVE_FPU is not set
+# CONFIG_ARCH_HAVE_MPU is not set
+CONFIG_ARCH_HAVE_LOWVECTORS=y
+# CONFIG_ARCH_LOWVECTORS is not set
 
-CONFIG_DRAM_START=0
-CONFIG_DRAM_SIZE=8650752
+#
+# ARM Configuration Options
+#
+# CONFIG_ARM_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARM_TOOLCHAIN_CODESOURCERYL is not set
+CONFIG_ARM_TOOLCHAIN_GNU_EABIL=y
+# CONFIG_ARM_TOOLCHAIN_GNU_OABI is not set
 
 #
-# C5471 specific device driver settings
+# Calypso Configuration Options
 #
-CONFIG_SERCOMM_CONSOLE=y
-CONFIG_SERIAL_IRDA_CONSOLE=n
-CONFIG_UART_IRDA_HWFLOWCONTROL=n
-CONFIG_UART_MODEM_HWFLOWCONTROL=n
-CONFIG_UART_IRDA_RXBUFSIZE=256
+
+#
+# Modem UART Configuration
+#
+CONFIG_UART_MODEM_BAUD=115200
+CONFIG_UART_MODEM_PARITY=0
+CONFIG_UART_MODEM_BITS=8
+CONFIG_UART_MODEM_2STOP=0
 CONFIG_UART_MODEM_RXBUFSIZE=256
-CONFIG_UART_IRDA_TXBUFSIZE=256
 CONFIG_UART_MODEM_TXBUFSIZE=256
+# CONFIG_UART_MODEM_HWFLOWCONTROL is not set
+
+#
+# IrDA UART Configuration
+#
 CONFIG_UART_IRDA_BAUD=115200
-CONFIG_UART_MODEM_BAUD=115200
-CONFIG_UART_IRDA_BITS=8
-CONFIG_UART_MODEM_BITS=8
 CONFIG_UART_IRDA_PARITY=0
-CONFIG_UART_MODEM_PARITY=0
+CONFIG_UART_IRDA_BITS=8
 CONFIG_UART_IRDA_2STOP=0
-CONFIG_UART_MODEM_2STOP=0
-CONFIG_STDIO_LINE_BUFFER=y
+CONFIG_UART_IRDA_RXBUFSIZE=256
+CONFIG_UART_IRDA_TXBUFSIZE=256
+# CONFIG_UART_IRDA_HWFLOWCONTROL is not set
+CONFIG_SERCOMM_CONSOLE=y
+# CONFIG_SERIAL_MODEM_CONSOLE is not set
+# CONFIG_SERIAL_IRDA_CONSOLE is not set
+# CONFIG_SERIAL_CONSOLE_NONE is not set
 
 #
-# C5471 Ethernet Driver settings
-CONFIG_C5471_NET_STATS=n
-ETHERNET_PHY_LU3X31T_T64=1
-ETHERNET_PHY_AC101L=2
-CONFIG_C5471_ETHERNET_PHY=ETHERNET_PHY_LU3X31T_T64
-CONFIG_NET_C5471_AUTONEGOTIATION=y
-CONFIG_NET_C5471_BASET100=n
-CONFIG_NET_C5471_BASET10=n
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+# CONFIG_ARCH_IRQPRIO is not set
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+# CONFIG_ARCH_HAVE_RAMVECTORS is not set
 
 #
-# General build options
+# Board Settings
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_RAW_BINARY=y
-CONFIG_HAVE_LIBM=n
+CONFIG_BOARD_LOOPSPERMSEC=1250
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=1024
 
 #
-# General OS setup
+# Boot options
 #
-CONFIG_USER_ENTRYPOINT="nsh_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2007
-CONFIG_START_MONTH=2
-CONFIG_START_DAY=13
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Boot Memory Configuration
 #
-# There are certain dependency relationships in these
-# features.
+CONFIG_RAM_START=0
+CONFIG_RAM_SIZE=8650752
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# Board Selection
 #
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_MOUNTPOINT=n
-CONFIG_DISABLE_ENVIRON=n
-CONFIG_DISABLE_POLL=y
+CONFIG_ARCH_BOARD_COMPALE86=y
+# CONFIG_ARCH_BOARD_COMPALE88 is not set
+# CONFIG_ARCH_BOARD_COMPALE99 is not set
+# CONFIG_ARCH_BOARD_PIRELLI_DPL10 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="compal_e86"
 
 #
-# FAT filesystem configuration
+# Common Board Options
 #
-CONFIG_FS_FAT=n
-CONFIG_FS_ROMFS=n
+CONFIG_NSH_MMCSDMINOR=0
 
 #
-# Misc libc settings
+# Board-Specific Options
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
 
 #
-# Allow for architecture optimized implementations
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2007
+CONFIG_START_MONTH=2
+CONFIG_START_DAY=13
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+CONFIG_DISABLE_MQUEUE=y
+# CONFIG_DISABLE_ENVIRON is not set
+
 #
-# The architecture can provide optimized versions of the
-# following to improve sysem performance
+# Signal Numbers
 #
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
 
 #
 # Sizes of configurable things (0 disables)
@@ -178,105 +237,418 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=1024
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=0
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=4
 CONFIG_PREALLOC_WDOGS=8
 CONFIG_PREALLOC_TIMERS=8
 
-# SPI driver
 #
-CONFIG_SPI_OWNBUS=y
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
 CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
 
 #
-# TCP/IP and UDP support via uIP
-#
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=8
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=y
-CONFIG_NET_TCP_CONNS=8
-CONFIG_NET_NTCP_READAHEAD_BUFFERS=32
-CONFIG_NET_TCPBACKLOG=n
-CONFIG_NET_MAX_LISTENPORTS=8
-CONFIG_NET_UDP=y
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=4
-CONFIG_NET_ICMP=y
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
-#CONFIG_NET_FWCACHE_SIZE=2
-
-#
-# UIP Network Utilities
-#
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
-
-#
-# Settings for examples/uip
-CONFIG_EXAMPLE_UIP_NOMAC=y
-CONFIG_EXAMPLE_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLE_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLE_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLE_UIP_DHCPC=n
-
-#
-# Settings for examples/nettest
-CONFIG_EXAMPLE_NETTEST_SERVER=n
-CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLE_NETTEST_NOMAC=y
-CONFIG_EXAMPLE_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLE_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLE_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLE_NETTEST_CLIENTIP=0x0a000001
-
-#
-# Settings for examples/nsh
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_CMD_SIZE=40
-CONFIG_NSH_STACKSIZE=4096
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=y
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
+# USART Configuration
+#
+# CONFIG_STANDARD_SERIAL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_HAVE_HEAP2=y
+CONFIG_HEAP2_BASE=0x00000000
+CONFIG_HEAP2_SIZE=0
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=1024
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+CONFIG_EXAMPLES_HELLO=y
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
 CONFIG_NSH_BUILTIN_APPS=y
 
 #
-# Settings for examples/hello
-CONFIG_EXAMPLES_HELLO_BUILTIN=y
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=1024
+CONFIG_NSH_LINELEN=80
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
 
 #
-# Settings for examples/wget
+# USB Trace Support
 #
-CONFIG_EXAMPLE_WGET_URL="http://www.nuttx.org/index.html"
-CONFIG_EXAMPLE_WGET_NOMAC=y
-CONFIG_EXAMPLE_WGET_IPADDR=0x0a000002
-CONFIG_EXAMPLE_WGET_DRIPADDR=0x0a000001
-CONFIG_EXAMPLE_WGET_NETMASK=0xffffff00
+# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
 
 #
-# Stack and heap information
+# NxWidgets/NxWM
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-#CONFIG_STACK_POINTER
-CONFIG_IDLETHREAD_STACKSIZE=4096
-CONFIG_USERMAIN_STACKSIZE=4096
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=4096
-CONFIG_HEAP_BASE=
-CONFIG_HEAP_SIZE=
+
+#
+# System NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+CONFIG_SYSTEM_POWEROFF=y
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set