diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2007-04-28 19:39:18 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2007-04-28 19:39:18 +0000 |
commit | cfa89740728582ffd77b868c732c45cef8c20ea9 (patch) | |
tree | 14e026aaf0cc6b424581434e0986f367d69adfc7 /nuttx/arch/arm/src/dm320/dm320_irq.c | |
parent | 02755ff439dd361643294af1c10937845d848f69 (diff) | |
download | px4-nuttx-cfa89740728582ffd77b868c732c45cef8c20ea9.tar.gz px4-nuttx-cfa89740728582ffd77b868c732c45cef8c20ea9.tar.bz2 px4-nuttx-cfa89740728582ffd77b868c732c45cef8c20ea9.zip |
Common ARM support
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@187 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/arch/arm/src/dm320/dm320_irq.c')
-rw-r--r-- | nuttx/arch/arm/src/dm320/dm320_irq.c | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/dm320/dm320_irq.c b/nuttx/arch/arm/src/dm320/dm320_irq.c new file mode 100644 index 000000000..692d06a98 --- /dev/null +++ b/nuttx/arch/arm/src/dm320/dm320_irq.c @@ -0,0 +1,245 @@ +/************************************************************ + * dm320/dm320_irq.c + * + * Copyright (C) 2007 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name Gregory Nutt nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************/ + +/************************************************************ + * Included Files + ************************************************************/ + +#include <nuttx/config.h> +#include <sys/types.h> +#include <nuttx/irq.h> +#include "up_arch.h" +#include "os_internal.h" +#include "up_internal.h" + +/************************************************************ + * Definitions + ************************************************************/ + +/************************************************************ + * Public Data + ************************************************************/ + +uint32 *current_regs; + +/************************************************************ + * Private Data + ************************************************************/ + +/* The value of _vflashstart is defined in ld.script. It + * could be hard-coded because we know that correct IRAM + * area is 0xffc00000. + */ + +extern int _svectors; /* Type does not matter */ + +/************************************************************ + * Private Functions + ************************************************************/ + +/************************************************************ + * Public Funtions + ************************************************************/ + +/************************************************************ + * Name: up_irqinitialize + ************************************************************/ + +void up_irqinitialize(void) +{ + /* Clear, disable and configure all interrupts. */ + + putreg16(0, DM320_INTC_EINT0); /* Mask all IRQs/FIQs */ + putreg16(0, DM320_INTC_EINT1); + putreg16(0, DM320_INTC_EINT2); + + putreg16(0, DM320_INTC_INTRAW); /* No masked interrupts in status */ + + putreg16(0, DM320_INTC_FISEL0); /* No FIQs */ + putreg16(0, DM320_INTC_FISEL1); + putreg16(0, DM320_INTC_FISEL2); + + putreg16(0xffff, DM320_INTC_FIQ0); /* Clear all pending FIQs */ + putreg16(0xffff, DM320_INTC_FIQ1); + putreg16(0xffff, DM320_INTC_FIQ2); + + putreg16(0xffff, DM320_INTC_IRQ0); /* Clear all pending IRQs */ + putreg16(0xffff, DM320_INTC_IRQ1); + putreg16(0xffff, DM320_INTC_IRQ2); + + /* Make sure that the base addresses are zero and that + * the table increment is 4 bytes. + */ + + putreg16(0, DM320_INTC_EABASE0); + putreg16(0, DM320_INTC_EABASE1); + + /* currents_regs is non-NULL only while processing an interrupt */ + + current_regs = NULL; + + /* And finally, enable interrupts */ + +#ifndef CONFIG_SUPPRESS_INTERRUPTS + irqrestore(SVC_MODE | PSR_F_BIT); +#endif +} + +/************************************************************ + * Name: up_disable_irq + * + * Description: + * Disable the IRQ specified by 'irq' + * + ************************************************************/ + +void up_disable_irq(int irq) +{ + /* Disable the interrupt by clearing the corresponding bit in + * the IRQ enable register. + */ + + if (irq < 16) + { + /* IRQs0-15 are controlled by the IRQ0 enable register + * Clear the associated bit to disable the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT0) & ~(1 << irq)), DM320_INTC_EINT0); + } + else if (irq < 32) + { + /* IRQs16-31 are controlled by the IRQ1 enable register + * Clear the associated bit to disable the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT1) & ~(1 << (irq-16))), DM320_INTC_EINT1); + } + else + { + /* IRQs32- are controlled by the IRQ2 enable register + * Clear the associated bit to disable the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT2) & ~(1 << (irq-32))), DM320_INTC_EINT2); + } +} + +/************************************************************ + * Name: up_enable_irq + * + * Description: + * Enable the IRQ specified by 'irq' + * + ************************************************************/ + +void up_enable_irq(int irq) +{ + /* Enable the interrupt by setting the corresponding bit in + * the IRQ enable register. + */ + + if (irq < 16) + { + /* IRQs0-15 are controlled by the IRQ0 enable register + * Set the associated bit to enable the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT0) | (1 << irq)), DM320_INTC_EINT0); + } + else if (irq < 32) + { + /* IRQs16-31 are controlled by the IRQ1 enable register + * Set the associated bit to enable the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT1) | (1 << (irq-16))), DM320_INTC_EINT1); + } + else + { + /* IRQs32- are controlled by the IRQ2 enable register + * Set the associated bit to enable the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT2) | (1 << (irq-32))), DM320_INTC_EINT2); + } +} + +/************************************************************ + * Name: up_maskack_irq + * + * Description: + * Mask the IRQ and acknowledge it + * + ************************************************************/ + +void up_maskack_irq(int irq) +{ + /* Disable the interrupt by clearing the corresponding bit in + * the IRQ enable register. And acknowlege it by setting the + * corresponding bit in the IRQ status register. + */ + + if (irq < 16) + { + /* IRQs0-15 are controlled by the IRQ0 enable register + * Clear the associated enable bit to disable the interrupt + * Set the associated status bit to clear the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT0) & ~(1<< irq)), DM320_INTC_EINT0); + putreg16((1 << irq), DM320_INTC_IRQ0); + } + else if (irq < 32) + { + /* IRQs16-31 are controlled by the IRQ1 enable register + * Clear the associated enable bit to disable the interrupt + * Set the associated status bit to clear the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT1) & ~(1<< (irq-16))), DM320_INTC_EINT1); + putreg16((1 << (irq-16)), DM320_INTC_IRQ1); + } + else + { + /* IRQs32- are controlled by the IRQ2 enable register + * Clear the associated enable bit to disable the interrupt + * Set the associated status bit to clear the interrupt + */ + + putreg16((getreg16(DM320_INTC_EINT2) & ~(1<< (irq-32))), DM320_INTC_EINT2); + putreg16((1 << (irq-32)), DM320_INTC_IRQ2); + } +} |