More trailing whilespace removal

6 files changed, 6 insertions, 6 deletions

diff --git a/nuttx/arch/arm/src/kl/chip/kl_tpm.h b/nuttx/arch/arm/src/kl/chip/kl_tpm.h
index d9c8a9b70..7d185934b 100644
--- a/nuttx/arch/arm/src/kl/chip/kl_tpm.h
+++ b/nuttx/arch/arm/src/kl/chip/kl_tpm.h
@@ -176,7 +176,7 @@
 #define TPM_CONF_CSOT             (1 << 16) /* Bit 16: Counter Start On Trigger */
 #define TPM_CONF_CSOO             (1 << 17) /* Bit 17: Counter Stop On Overflow */
 #define TPM_CONF_CROT             (1 << 18) /* Bit 18: Counter Reload On Trigger */
-                                            /* Bits 19-23: Reserved */              
+                                            /* Bits 19-23: Reserved */
 #define TPM_CONF_TRGSEL_SHIFT     24
 #define TPM_CONF_TRGSEL_MASK      (15 << TPM_CONF_TRGSEL_SHIFT)
 # define TPM_CONF_TRGSEL_EXTRG_IN (0 << TPM_CONF_TRGSEL_SHIFT) /* External trigger pin input */
diff --git a/nuttx/arch/arm/src/kl/kl_config.h b/nuttx/arch/arm/src/kl/kl_config.h
index 1a6d1f1e2..fd7cc592c 100644
--- a/nuttx/arch/arm/src/kl/kl_config.h
+++ b/nuttx/arch/arm/src/kl/kl_config.h
@@ -64,7 +64,7 @@
 /* Are any UARTs enabled? */
 
 #undef HAVE_UART_DEVICE
-#if defined(CONFIG_KL_UART0) || defined(CONFIG_KL_UART1) || defined(CONFIG_KL_UART2) 
+#if defined(CONFIG_KL_UART0) || defined(CONFIG_KL_UART1) || defined(CONFIG_KL_UART2)
 #  define HAVE_UART_DEVICE 1
 #endif
 
diff --git a/nuttx/arch/arm/src/kl/kl_gpio.c b/nuttx/arch/arm/src/kl/kl_gpio.c
index 58de0eea1..78fba619a 100644
--- a/nuttx/arch/arm/src/kl/kl_gpio.c
+++ b/nuttx/arch/arm/src/kl/kl_gpio.c
@@ -145,7 +145,7 @@ int kl_configgpio(uint32_t cfgset)
                 {
                   regval |= PORT_PCR_ODE;
                 }
-              
+
               /* Check for high drive output */
 
               if ((cfgset & _PIN_OUTPUT_DRIVE_MASK) == _PIN_OUTPUT_HIGHDRIVE)
diff --git a/nuttx/arch/arm/src/kl/kl_gpio.h b/nuttx/arch/arm/src/kl/kl_gpio.h
index e1db46d9a..d2d181b13 100644
--- a/nuttx/arch/arm/src/kl/kl_gpio.h
+++ b/nuttx/arch/arm/src/kl/kl_gpio.h
@@ -241,7 +241,7 @@
 
 #define PIN_PASV_FILTER        (1 << 18)  /* Bit 18: Enable passive filter */
 #define PIN_DIG_FILTER         (1 << 17)  /* Bit 17: Enable digital filter */
- 
+
 /* Three bits are used to define the port number:
  *
  * ---- ---- ---- ---- ---- -ppp ---- ----
diff --git a/nuttx/arch/arm/src/kl/kl_idle.c b/nuttx/arch/arm/src/kl/kl_idle.c
index 6ec2ab46f..688a002bd 100644
--- a/nuttx/arch/arm/src/kl/kl_idle.c
+++ b/nuttx/arch/arm/src/kl/kl_idle.c
@@ -87,7 +87,7 @@ static void up_idlepm(void)
   enum pm_state_e newstate;
   irqstate_t flags;
   int ret;
-  
+
   /* Decide, which power saving level can be obtained */
 
   newstate = pm_checkstate();
diff --git a/nuttx/arch/arm/src/kl/kl_userspace.c b/nuttx/arch/arm/src/kl/kl_userspace.c
index 00d0f5338..8949a90d2 100644
--- a/nuttx/arch/arm/src/kl/kl_userspace.c
+++ b/nuttx/arch/arm/src/kl/kl_userspace.c
@@ -97,7 +97,7 @@ void kl_userspace(void)
   /* Initialize all of user-space .data */
 
   DEBUGASSERT(USERSPACE->us_datasource != 0 &&
-              USERSPACE->us_datastart != 0 && USERSPACE->us_dataend != 0 && 
+              USERSPACE->us_datastart != 0 && USERSPACE->us_dataend != 0 &&
               USERSPACE->us_datastart <= USERSPACE->us_dataend);
 
   src  = (uint8_t*)USERSPACE->us_datasource;