diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-06-08 21:10:47 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-06-08 21:10:47 +0000 |
commit | fe2959c7e6d314cc44cf5472d20b8ac6d5806b51 (patch) | |
tree | 45399264e3dd854c8236e96a9930e40b3083ce28 /nuttx/arch/avr/src/at90usb/at90usb_serial.c | |
parent | c626aec4434149e17e4cd98174e59095a3a06e05 (diff) | |
download | px4-nuttx-fe2959c7e6d314cc44cf5472d20b8ac6d5806b51.tar.gz px4-nuttx-fe2959c7e6d314cc44cf5472d20b8ac6d5806b51.tar.bz2 px4-nuttx-fe2959c7e6d314cc44cf5472d20b8ac6d5806b51.zip |
More logic for the AVR port
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3684 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/arch/avr/src/at90usb/at90usb_serial.c')
-rw-r--r-- | nuttx/arch/avr/src/at90usb/at90usb_serial.c | 664 |
1 files changed, 664 insertions, 0 deletions
diff --git a/nuttx/arch/avr/src/at90usb/at90usb_serial.c b/nuttx/arch/avr/src/at90usb/at90usb_serial.c new file mode 100644 index 000000000..939c707a7 --- /dev/null +++ b/nuttx/arch/avr/src/at90usb/at90usb_serial.c @@ -0,0 +1,664 @@ +/**************************************************************************** + * arch/avr/src/at90usb/at90usb_serial.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#include "at90usb_config.h" + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <unistd.h> +#include <semaphore.h> +#include <string.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/irq.h> +#include <nuttx/arch.h> +#include <nuttx/serial.h> + +#include <arch/board/board.h> + +#include "up_arch.h" +#include "up_internal.h" +#include "os_internal.h" +#include "at90usb_internal.h" + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Some sanity checks *******************************************************/ + +/* Is there at least one USART enabled and configured as a RS-232 device? */ + +#ifndef HAVE_USART_DEVICE +# warning "No USARTs enabled as RS-232 devices" +#endif + +/* If we are not using the serial driver for the console, then we still must + * provide some minimal implementation of up_putc. + */ + +#ifdef CONFIG_USE_SERIALDRIVER + +/* Which USART with be tty0/console and which tty1? */ + +#if defined(CONFIG_USART1_SERIAL_CONSOLE) +# define CONSOLE_DEV g_usart1port /* USART1 is console */ +# define TTYS0_DEV g_usart1port /* USART1 is ttyS0 */ +#endif + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct up_dev_s +{ + uintptr_t usartbase; /* Base address of USART registers */ + uint32_t baud; /* Configured baud */ + uint32_t csr; /* Saved channel status register contents */ + uint8_t irq; /* IRQ associated with this USART */ + uint8_t parity; /* 0=none, 1=odd, 2=even */ + uint8_t bits; /* Number of bits (5, 6, 7 or 8) */ + bool stopbits2; /* true: Configure with 2 stop bits instead of 1 */ +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +static int up_setup(struct uart_dev_s *dev); +static void up_shutdown(struct uart_dev_s *dev); +static int up_attach(struct uart_dev_s *dev); +static void up_detach(struct uart_dev_s *dev); +static int up_interrupt(int irq, void *context); +static int up_ioctl(struct file *filep, int cmd, unsigned long arg); +static int up_receive(struct uart_dev_s *dev, uint32_t *status); +static void up_rxint(struct uart_dev_s *dev, bool enable); +static bool up_rxavailable(struct uart_dev_s *dev); +static void up_send(struct uart_dev_s *dev, int ch); +static void up_txint(struct uart_dev_s *dev, bool enable); +static bool up_txready(struct uart_dev_s *dev); + +/**************************************************************************** + * Private Variables + ****************************************************************************/ + +struct uart_ops_s g_uart_ops = +{ + .setup = up_setup, + .shutdown = up_shutdown, + .attach = up_attach, + .detach = up_detach, + .ioctl = up_ioctl, + .receive = up_receive, + .rxint = up_rxint, + .rxavailable = up_rxavailable, + .send = up_send, + .txint = up_txint, + .txready = up_txready, + .txempty = up_txready, +}; + +/* I/O buffers */ + +#ifdef CONFIG_AVR_USART1_RS232 +static char g_usart1rxbuffer[CONFIG_USART1_RXBUFSIZE]; +static char g_usart1txbuffer[CONFIG_USART1_TXBUFSIZE]; +#endif + +/* This describes the state of the AVR32 USART1 port. */ + +#ifdef CONFIG_AVR_USART1_RS232 +static struct up_dev_s g_usart1priv = +{ + .usartbase = AVR_USART1_BASE, + .baud = CONFIG_USART1_BAUD, + .irq = AVR_IRQ_USART1, + .parity = CONFIG_USART1_PARITY, + .bits = CONFIG_USART1_BITS, + .stopbits2 = CONFIG_USART1_2STOP, +}; + +static uart_dev_t g_usart1port = +{ + .recv = + { + .size = CONFIG_USART1_RXBUFSIZE, + .buffer = g_usart1rxbuffer, + }, + .xmit = + { + .size = CONFIG_USART1_TXBUFSIZE, + .buffer = g_usart1txbuffer, + }, + .ops = &g_uart_ops, + .priv = &g_usart1priv, +}; +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_serialin + ****************************************************************************/ + +static inline uint32_t up_serialin(struct up_dev_s *priv, int offset) +{ +# warning "Missing logic" +} + +/**************************************************************************** + * Name: up_serialout + ****************************************************************************/ + +static inline void up_serialout(struct up_dev_s *priv, int offset, uint32_t value) +{ +# warning "Missing logic" +} + +/**************************************************************************** + * Name: up_restoreusartint + ****************************************************************************/ + +static void up_restoreusartint(struct up_dev_s *priv, uint32_t imr) +{ +# warning "Missing logic" +} + +/**************************************************************************** + * Name: up_disableusartint + ****************************************************************************/ + +static inline void up_disableusartint(struct up_dev_s *priv, uint32_t *imr) +{ +# warning "Missing logic" +} + +/**************************************************************************** + * Name: up_setup + * + * Description: + * Configure the USART baud, bits, parity, etc. This method is called the + * first time that the serial port is opened. + * + ****************************************************************************/ + +static int up_setup(struct uart_dev_s *dev) +{ +#ifndef CONFIG_SUPPRESS_UART_CONFIG + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Configure the USART as an RS-232 UART */ + + usart_configure(priv->usartbase, priv->baud, priv->parity, + priv->bits, priv->stopbits2); +#endif + + return OK; +} + +/**************************************************************************** + * Name: up_shutdown + * + * Description: + * Disable the USART. This method is called when the serial + * port is closed + * + ****************************************************************************/ + +static void up_shutdown(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Reset, disable interrupts, and disable Rx and Tx */ + + usart_reset(priv->usartbase); +} + +/**************************************************************************** + * Name: up_attach + * + * Description: + * Configure the USART to operation in interrupt driven mode. This method is + * called when the serial port is opened. Normally, this is just after the + * the setup() method is called, however, the serial console may operate in + * a non-interrupt driven mode during the boot phase. + * + * RX and TX interrupts are not enabled when by the attach method (unless the + * hardware supports multiple levels of interrupt enabling). The RX and TX + * interrupts are not enabled until the txint() and rxint() methods are called. + * + ****************************************************************************/ + +static int up_attach(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Attach the IRQ */ + + return irq_attach(priv->irq, up_interrupt); +} + +/**************************************************************************** + * Name: up_detach + * + * Description: + * Detach USART interrupts. This method is called when the serial port is + * closed normally just before the shutdown method is called. The exception + * is the serial console which is never shutdown. + * + ****************************************************************************/ + +static void up_detach(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; +# warning "Missing logic" + irq_detach(priv->irq); +} + +/**************************************************************************** + * Name: up_interrupt + * + * Description: + * This is the USART interrupt handler. It will be invoked when an + * interrupt received on the 'irq' It should call uart_transmitchars or + * uart_receivechar to perform the appropriate data transfers. The + * interrupt handling logic must be able to map the 'irq' number into the + * approprite uart_dev_s structure in order to call these functions. + * + ****************************************************************************/ + +static int up_interrupt(int irq, void *context) +{ + struct uart_dev_s *dev = NULL; + struct up_dev_s *priv; + uint32_t csr; + int passes; + bool handled; + +#ifdef CONFIG_AVR_USART1_RS232 + if (g_usart1priv.irq == irq) + { + dev = &g_usart1port; + } + else +#endif + { + PANIC(OSERR_INTERNAL); + } + priv = (struct up_dev_s*)dev->priv; + DEBUGASSERT(priv); + + /* Loop until there are no characters to be transferred or, + * until we have been looping for a long time. + */ + + handled = true; + for (passes = 0; passes < 256 && handled; passes++) + { + handled = false; + +# warning "Missing logic" + /* Handle incoming, receive bytes (with or without timeout) */ + +# warning "Missing logic" + { + /* Received data ready... process incoming bytes */ + + uart_recvchars(dev); + handled = true; + } + + /* Handle outgoing, transmit bytes */ + +# warning "Missing logic" + { + /* Transmit data regiser empty ... process outgoing bytes */ + + uart_xmitchars(dev); + handled = true; + } + } + return OK; +} + +/**************************************************************************** + * Name: up_ioctl + * + * Description: + * All ioctl calls will be routed through this method + * + ****************************************************************************/ + +static int up_ioctl(struct file *filep, int cmd, unsigned long arg) +{ +#if 0 /* Reserved for future growth */ + struct inode *inode; + struct uart_dev_s *dev; + struct up_dev_s *priv; + int ret = OK; + + DEBUGASSERT(filep, filep->f_inode); + inode = filep->f_inode; + dev = inode->i_private; + + DEBUGASSERT(dev, dev->priv) + priv = (struct up_dev_s*)dev->priv; + + switch (cmd) + { + case xxx: /* Add commands here */ + break; + + default: + ret = -ENOTTY; + break; + } + + return ret; +#else + return -ENOTTY; +#endif +} + +/**************************************************************************** + * Name: up_receive + * + * Description: + * Called (usually) from the interrupt level to receive one + * character from the USART. Error bits associated with the + * receipt are provided in the return 'status'. + * + ****************************************************************************/ + +static int up_receive(struct uart_dev_s *dev, uint32_t *status) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Get the Rx byte. The USART Rx interrupt flag is cleared by side effect + * when reading the received character. + */ + +# warning "Missing logic" + + /* Return status information */ + + if (status) + { +# warning "Missing logic" + } + + /* Then return the actual received byte */ + +# warning "Missing logic" + return 0; +} + +/**************************************************************************** + * Name: up_rxint + * + * Description: + * Call to enable or disable RX interrupts + * + ****************************************************************************/ + +static void up_rxint(struct uart_dev_s *dev, bool enable) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + if (enable) + { + /* Receive an interrupt when their is anything in the Rx data register (or an Rx + * timeout occurs). + */ + +#ifndef CONFIG_SUPPRESS_SERIAL_INTS +# warning "Missing logic" +#endif + } + else + { +# warning "Missing logic" + } +} + +/**************************************************************************** + * Name: up_rxavailable + * + * Description: + * Return true if the receive register is not empty + * + ****************************************************************************/ + +static bool up_rxavailable(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; +# warning "Missing logic" + return 0; +} + +/**************************************************************************** + * Name: up_send + * + * Description: + * This method will send one byte on the USART. + * + ****************************************************************************/ + +static void up_send(struct uart_dev_s *dev, int ch) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; +# warning "Missing logic" + return 0; +} + +/**************************************************************************** + * Name: up_txint + * + * Description: + * Call to enable or disable TX interrupts + * + ****************************************************************************/ + +static void up_txint(struct uart_dev_s *dev, bool enable) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + irqstate_t flags; + + flags = irqsave(); + if (enable) + { + /* Set to receive an interrupt when the TX data register is empty */ + +#ifndef CONFIG_SUPPRESS_SERIAL_INTS +# warning "Missing logic" + + /* Fake a TX interrupt here by just calling uart_xmitchars() with + * interrupts disabled (note this may recurse). + */ + + uart_xmitchars(dev); +#endif + } + else + { + /* Disable the TX interrupt */ + +# warning "Missing logic" + } + irqrestore(flags); +} + +/**************************************************************************** + * Name: up_txready + * + * Description: + * Return true if the tranmsit data register is empty + * + ****************************************************************************/ + +static bool up_txready(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; +# warning "Missing logic" + return 0; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_earlyserialinit + * + * Description: + * Performs the low level USART initialization early in debug so that the + * serial console will be available during bootup. This must be called + * before up_serialinit. NOTE: This function depends on GPIO pin + * configuration performed in up_consoleinit() and main clock iniialization + * performed in up_clkinitialize(). + * + ****************************************************************************/ + +void up_earlyserialinit(void) +{ + /* Disable all USARTS */ + + up_disableusartint(TTYS0_DEV.priv, NULL); +#ifdef TTYS1_DEV + up_disableusartint(TTYS1_DEV.priv, NULL); +#endif + + /* Configuration whichever one is the console */ + +#ifdef HAVE_SERIAL_CONSOLE + CONSOLE_DEV.isconsole = true; + up_setup(&CONSOLE_DEV); +#endif +} + +/**************************************************************************** + * Name: up_serialinit + * + * Description: + * Register serial console and serial ports. This assumes + * that up_earlyserialinit was called previously. + * + ****************************************************************************/ + +void up_serialinit(void) +{ + /* Register the console */ + +#ifdef HAVE_SERIAL_CONSOLE + (void)uart_register("/dev/console", &CONSOLE_DEV); +#endif + + /* Register all USARTs */ + + (void)uart_register("/dev/ttyS0", &TTYS0_DEV); +#ifdef TTYS1_DEV + (void)uart_register("/dev/ttyS1", &TTYS1_DEV); +#endif +} + +/**************************************************************************** + * Name: up_putc + * + * Description: + * Provide priority, low-level access to support OS debug writes + * + ****************************************************************************/ + +int up_putc(int ch) +{ +#ifdef HAVE_SERIAL_CONSOLE + struct up_dev_s *priv = (struct up_dev_s*)CONSOLE_DEV.priv; + uint32_t imr; + + up_disableusartint(priv, &imr); + + /* Check for LF */ + + if (ch == '\n') + { + /* Add CR */ + + up_lowputc('\r'); + } + + up_lowputc(ch); + up_restoreusartint(priv, imr); +#endif + return ch; +} + +#else /* CONFIG_USE_SERIALDRIVER */ + +/**************************************************************************** + * Name: up_putc + * + * Description: + * Provide priority, low-level access to support OS debug writes + * + ****************************************************************************/ + +int up_putc(int ch) +{ +#ifdef HAVE_SERIAL_CONSOLE + /* Check for LF */ + + if (ch == '\n') + { + /* Add CR */ + + up_lowputc('\r'); + } + + up_lowputc(ch); +#endif + return ch; +} + +#endif /* CONFIG_USE_SERIALDRIVER */ + |