diff options
| author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2009-05-08 21:12:33 +0000 |
|---|---|---|
| committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2009-05-08 21:12:33 +0000 |
| commit | 77c4a4d3e9f5a8f9c8d6c921e05dfae965512117 (patch) | |
| tree | 1fbdded94bf80f8b3710c7590573fff28c250a86 /nuttx/configs/eagle100/ostest/defconfig | |
| parent | 637a7d82473a76f00af93d16c38624b4960e8575 (diff) | |
| download | px4-nuttx-77c4a4d3e9f5a8f9c8d6c921e05dfae965512117.tar.gz px4-nuttx-77c4a4d3e9f5a8f9c8d6c921e05dfae965512117.tar.bz2 px4-nuttx-77c4a4d3e9f5a8f9c8d6c921e05dfae965512117.zip | |
lm3s6918 update
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1764 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/eagle100/ostest/defconfig')
| -rw-r--r-- | nuttx/configs/eagle100/ostest/defconfig | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/nuttx/configs/eagle100/ostest/defconfig b/nuttx/configs/eagle100/ostest/defconfig index d88d1e924..d686306bc 100644 --- a/nuttx/configs/eagle100/ostest/defconfig +++ b/nuttx/configs/eagle100/ostest/defconfig @@ -49,6 +49,7 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -66,6 +67,7 @@ CONFIG_ARCH_BOARD_EAGLE100=y CONFIG_BOARD_LOOPSPERMSEC=16945 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x00000000 +CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_DRAM_NUTTXENTRY=0x00002000 CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y @@ -78,7 +80,7 @@ CONFIG_ARCH_LEDS=y # CONFIG_UARTn_DISABLE - select to disable all support for # the UART # CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the -# console and ttys0 (default is the UART1). +# console and ttys0 (default is the UART0). # CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. # This specific the size of the receive buffer # CONFIG_UARTn_TXBUFSIZE - Characters are buffered before @@ -88,30 +90,22 @@ CONFIG_ARCH_LEDS=y # CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity # CONFIG_UARTn_2STOP - Two stop bits # -CONFIG_UART1_DISABLE=n -CONFIG_UART2_DISABLE=y -CONFIG_UART3_DISABLE=y -CONFIG_UART1_SERIAL_CONSOLE=y -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=n +CONFIG_UART0_DISABLE=n +CONFIG_UART1_DISABLE=y +CONFIG_UART0_SERIAL_CONSOLE=y +CONFIG_UART1_SERIAL_CONSOLE=n +CONFIG_UART0_TXBUFSIZE=256 CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 +CONFIG_UART0_RXBUFSIZE=256 CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 CONFIG_UART1_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 +CONFIG_UART0_BITS=8 CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 +CONFIG_UART0_PARITY=0 CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 +CONFIG_UART0_2STOP=0 CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 -CONFIG_UART3_2STOP=0 # # LM3S6918 specific SPI device driver settings @@ -122,6 +116,12 @@ CONFIG_SPI1_DISABLE=n CONFIG_SPI2_DISABLE=y # +# LM3S6918 specific serial device driver settings +# +CONFIG_LM3S_ETHERNET=n +CONFIG_LM3S_ETHLEDS=n + +# # General build options # # CONFIG_RRLOAD_BINARY - make the rrload binary format used with |