diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-01-25 20:17:59 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-01-25 20:17:59 +0000 |
commit | 657f0d2092b325bbaec6d61cce725295e38df61e (patch) | |
tree | 7dddd582f892fceb4d2b93f1202946d7cbeed23b /nuttx/configs/hymini-stm32v/src/up_usbstrg.c | |
parent | a2067c2d2efa28d2f252bec2893c470733935049 (diff) | |
download | px4-nuttx-657f0d2092b325bbaec6d61cce725295e38df61e.tar.gz px4-nuttx-657f0d2092b325bbaec6d61cce725295e38df61e.tar.bz2 px4-nuttx-657f0d2092b325bbaec6d61cce725295e38df61e.zip |
Massive name change USB STRG -> USB MSC
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4334 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/hymini-stm32v/src/up_usbstrg.c')
-rw-r--r-- | nuttx/configs/hymini-stm32v/src/up_usbstrg.c | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/nuttx/configs/hymini-stm32v/src/up_usbstrg.c b/nuttx/configs/hymini-stm32v/src/up_usbstrg.c deleted file mode 100644 index 8a309c270..000000000 --- a/nuttx/configs/hymini-stm32v/src/up_usbstrg.c +++ /dev/null @@ -1,164 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/src/up_usbstrg.c - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Configure and register the STM32 MMC/SD SDIO block driver. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdio.h> -#include <debug.h> -#include <errno.h> - -#include <nuttx/sdio.h> -#include <nuttx/mmcsd.h> - -#include "stm32_internal.h" - -/* There is nothing to do here if SDIO support is not selected. */ - -#ifdef CONFIG_STM32_SDIO - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ - -/* Configuration ************************************************************/ - -#ifndef CONFIG_EXAMPLES_USBSTRG_DEVMINOR1 -# define CONFIG_EXAMPLES_USBSTRG_DEVMINOR1 0 -#endif - -/* SLOT number(s) could depend on the board configuration */ - -#ifdef CONFIG_ARCH_BOARD_HYMINI_STM32V -# undef STM32_MMCSDSLOTNO -# define STM32_MMCSDSLOTNO 0 -#else - /* Add configuration for new STM32 boards here */ -# error "Unrecognized STM32 board" -#endif - -/* Debug ********************************************************************/ - -#ifdef CONFIG_CPP_HAVE_VARARGS -# ifdef CONFIG_DEBUG -# define message(...) lib_lowprintf(__VA_ARGS__) -# define msgflush() -# else -# define message(...) printf(__VA_ARGS__) -# define msgflush() fflush(stdout) -# endif -#else -# ifdef CONFIG_DEBUG -# define message lib_lowprintf -# define msgflush() -# else -# define message printf -# define msgflush() fflush(stdout) -# endif -#endif - - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: usbstrg_archinitialize - * - * Description: - * Perform architecture specific initialization - * - ****************************************************************************/ - -int usbstrg_archinitialize(void) -{ - /* If examples/usbstrg is built as an NSH command, then SD slot should - * already have been initialized in nsh_archinitialize() (see up_nsh.c). In - * this case, there is nothing further to be done here. - */ - -#ifndef CONFIG_EXAMPLES_USBSTRG_BUILTIN - FAR struct sdio_dev_s *sdio; - int ret; - - /* First, get an instance of the SDIO interface */ - - message("usbstrg_archinitialize: " - "Initializing SDIO slot %d\n", - STM32_MMCSDSLOTNO); - - sdio = sdio_initialize(STM32_MMCSDSLOTNO); - if (!sdio) - { - message("usbstrg_archinitialize: Failed to initialize SDIO slot %d\n", - STM32_MMCSDSLOTNO); - return -ENODEV; - } - - /* Now bind the SDIO interface to the MMC/SD driver */ - - message("usbstrg_archinitialize: " - "Bind SDIO to the MMC/SD driver, minor=%d\n", - CONFIG_EXAMPLES_USBSTRG_DEVMINOR1); - - ret = mmcsd_slotinitialize(CONFIG_EXAMPLES_USBSTRG_DEVMINOR1, sdio); - if (ret != OK) - { - message("usbstrg_archinitialize: " - "Failed to bind SDIO to the MMC/SD driver: %d\n", - ret); - return ret; - } - message("usbstrg_archinitialize: " - "Successfully bound SDIO to the MMC/SD driver\n"); - - /* Then let's guess and say that there is a card in the slot. I need to check to - * see if the Hy-Mini STM32v board supports a GPIO to detect if there is a card in - * the slot. - */ - - sdio_mediachange(sdio, true); - -#endif /* CONFIG_EXAMPLES_USBSTRG_BUILTIN */ - - return OK; -} - -#endif /* CONFIG_STM32_SDIO */ |