Add logic to initialize clocks

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1108 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 46 insertions, 2 deletions

diff --git a/nuttx/configs/olimex-strp711/ostest/defconfig b/nuttx/configs/olimex-strp711/ostest/defconfig
index e662dc0f9..70ef9aab9 100644
--- a/nuttx/configs/olimex-strp711/ostest/defconfig
+++ b/nuttx/configs/olimex-strp711/ostest/defconfig
@@ -72,18 +72,48 @@ CONFIG_ARCH_STACKDUMP=y
 #
 # STR71x specific boot/build settings
 #
+# CONFIG_STR71X_I2C0, CONFIG_STR71X_I2C1, CONFIG_STR71X_UART0, CONFIG_STR71X_UART1,
+# CONFIG_STR71X_UART2, CONFIG_STR71X_UART3, CONFIG_STR71X_USB, CONFIG_STR71X_CAN,
+# CONFIG_STR71X_BSPI0, CONFIG_STR71X_BSPI1, CONFIG_STR71X_HDLC, CONFIG_STR71X_XTI, 
+# CONFIG_STR71X_GPIO0, CONFIG_STR71X_GPIO1, CONFIG_STR71X_GPIO2, CONFIG_STR71X_ADC12, 
+# CONFIG_STR71X_CKOUT, CONFIG_STR71X_TIM1, CONFIG_STR71X_TIM2, CONFIG_STR71X_TIM3, and
+# CONFIG_STR71X_RTC
+#   Select peripherals to initialize (Timer0 and EIC are always initialized)
 # CONFIG_STR71X_BANK0, CONFIG_STR71X_BANK1, CONFIG_STR71X_BANK2, and CONFIG_STR71X_BANK3
 #   Enable initialize of external memory banks 0-3.
-# CONFIG_STR71X_BANK0_SIZE, CONFIG_STR71X_BANK1_SIZE, CONFIG_STR71X_BANK2_SIZE, and CONFIG_STR71X_BANK3_SIZE
+# CONFIG_STR71X_BANK0_SIZE, CONFIG_STR71X_BANK1_SIZE, CONFIG_STR71X_BANK2_SIZE, and
+# CONFIG_STR71X_BANK3_SIZE
 #   If a particular external memory bank is configured, then its width must be provided.
 #   8 and 16 (bits) are the only valid options.
-# CONFIG_STR71X_BANK0_WAITSTATES, CONFIG_STR71X_BANK1_WAITSTATES, CONFIG_STR71X_BANK2_WAITSTATES, and CONFIG_STR71X_BANK3_WAITSTATES
+# CONFIG_STR71X_BANK0_WAITSTATES, CONFIG_STR71X_BANK1_WAITSTATES,
+# CONFIG_STR71X_BANK2_WAITSTATES, and CONFIG_STR71X_BANK3_WAITSTATES
 #   If a particular external memory bank is configured, then the number of waistates
 #   for the bank must also be provided.  Valid options are {0, .., 15}
 # CONFIG_STR71X_BIGEXTMEM
 #   The default is to provide 20 bits of address for all external memory regions.  If
 #   any memory region is larger than 1Mb, then this option should be selected.  In this
 #   case, 24 bits of addressing will be used
+CONFIG_STR71X_I2C0=n
+CONFIG_STR71X_I2C1=n
+CONFIG_STR71X_UART0=y
+CONFIG_STR71X_UART1=y
+CONFIG_STR71X_UART2=n
+CONFIG_STR71X_UART3=n
+CONFIG_STR71X_USB=n
+CONFIG_STR71X_CAN=n
+CONFIG_STR71X_BSPI0=n
+CONFIG_STR71X_BSPI1=n
+CONFIG_STR71X_HDLC=n
+CONFIG_STR71X_XTI=n
+CONFIG_STR71X_GPIO0=y
+CONFIG_STR71X_GPIO1=n
+CONFIG_STR71X_GPIO2=n
+CONFIG_STR71X_ADC12=n
+CONFIG_STR71X_CKOUT=n
+CONFIG_STR71X_TIM1=n
+CONFIG_STR71X_TIM2=n
+CONFIG_STR71X_TIM3=n
+CONFIG_STR71X_RTC=n
 CONFIG_STR71X_BANK0=n
 CONFIG_STR71X_BANK0_SIZE=16
 CONFIG_STR71X_BANK0_WAITSTATES=0
@@ -114,18 +144,32 @@ CONFIG_STR71X_BIGEXTMEM=n
 #
 CONFIG_UART0_SERIAL_CONSOLE=y
 CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
 CONFIG_UART0_TXBUFSIZE=256
 CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
 CONFIG_UART0_RXBUFSIZE=256
 CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
 CONFIG_UART0_BAUD=38400
 CONFIG_UART1_BAUD=38400
+CONFIG_UART2_BAUD=38400
+CONFIG_UART3_BAUD=38400
 CONFIG_UART0_BITS=8
 CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
 CONFIG_UART0_PARITY=0
 CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
 CONFIG_UART0_2STOP=0
 CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
 
 #
 # General build options