diff options
author | Gregory Nutt <gnutt@nuttx.org> | 2013-06-12 17:32:00 -0600 |
---|---|---|
committer | Gregory Nutt <gnutt@nuttx.org> | 2013-06-12 17:32:00 -0600 |
commit | 3980a00ab75c580d1f4246a9be226631832c9e6e (patch) | |
tree | 1d8e177d23a39c0fe30e44cc1843cb3f4d737021 /nuttx/configs/sam3u-ek | |
parent | 5633c904e72b25119bbd9056bc0951ef9f6ad88e (diff) | |
download | px4-nuttx-3980a00ab75c580d1f4246a9be226631832c9e6e.tar.gz px4-nuttx-3980a00ab75c580d1f4246a9be226631832c9e6e.tar.bz2 px4-nuttx-3980a00ab75c580d1f4246a9be226631832c9e6e.zip |
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
Diffstat (limited to 'nuttx/configs/sam3u-ek')
-rw-r--r-- | nuttx/configs/sam3u-ek/README.txt | 129 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/knsh/defconfig | 74 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/nsh/defconfig | 48 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/nx/defconfig | 77 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/ostest/defconfig | 74 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/src/Makefile | 2 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/src/sam3u-ek.h | 7 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/src/up_lcd.c | 6 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/src/up_nsh.c | 39 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/src/up_touchscreen.c | 4 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/touchscreen/Make.defs | 109 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/touchscreen/defconfig | 768 | ||||
-rwxr-xr-x | nuttx/configs/sam3u-ek/touchscreen/setenv.sh | 47 |
13 files changed, 342 insertions, 1042 deletions
diff --git a/nuttx/configs/sam3u-ek/README.txt b/nuttx/configs/sam3u-ek/README.txt index 628a645f2..6cb173e92 100644 --- a/nuttx/configs/sam3u-ek/README.txt +++ b/nuttx/configs/sam3u-ek/README.txt @@ -1,8 +1,8 @@ README ^^^^^^ -This README discusses issues unique to NuttX configurations for the -Atmel SAM3U-EK development board. +This README discusses issues unique to NuttX configurations for the Atmel +SAM3U-EK development board featuring the ATAM3U Contents ^^^^^^^^ @@ -91,7 +91,7 @@ IDEs NuttX is built using command-line make. It can be used with an IDE, but some effort will be required to create the project (There is a simple RIDE project in the RIDE subdirectory). - + Makefile Build -------------- Under Eclipse, it is pretty easy to set up an "empty makefile project" and @@ -188,7 +188,7 @@ NXFLAT Toolchain tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can be downloaded from the NuttX SourceForge download site (https://sourceforge.net/projects/nuttx/files/). - + This GNU toolchain builds and executes in the Linux or Cygwin environment. 1. You must have already configured Nuttx in <some-dir>/nuttx. @@ -371,25 +371,42 @@ SAM3U-EK-specific Configuration Options Configurations ^^^^^^^^^^^^^^ -Each SAM3U-EK configuration is maintained in a sub-directory and -can be selected as follow: + Each SAM3U-EK configuration is maintained in a sub-directory and + can be selected as follow: cd tools ./configure.sh sam3u-ek/<subdir> cd - . ./setenv.sh -Before sourcing the setenv.sh file above, you should examine it and perform -edits as necessary so that BUILDROOT_BIN is the correct path to the directory -than holds your toolchain binaries. + Before sourcing the setenv.sh file above, you should examine it and perform + edits as necessary so that BUILDROOT_BIN is the correct path to the directory + than holds your toolchain binaries. -And then build NuttX by simply typing the following. At the conclusion of -the make, the nuttx binary will reside in an ELF file called, simply, nuttx. + And then build NuttX by simply typing the following. At the conclusion of + the make, the nuttx binary will reside in an ELF file called, simply, nuttx. make -The <subdir> that is provided above as an argument to the tools/configure.sh -must be is one of the following: + The <subdir> that is provided above as an argument to the tools/configure.sh + must be is one of the following. + + NOTES: + + 1. These configurations use the mconf-based configuration tool. To + change any of these configurations using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Unless stated otherwise, all configurations generate console + output of UART0 (J3). + +Configuration sub-directories +----------------------------- knsh: This is identical to the nsh configuration below except that NuttX @@ -406,23 +423,14 @@ must be is one of the following: binaries (pass2) NOTES: - - 1. This configuration uses the mconf-based configuration tool. To - change this configuration using that tool, you should: - - a. Build and install the kconfig-mconf tool. See nuttx/README.txt - and misc/tools/README.txt. - b. Execute 'make menuconfig' in nuttx/ in order to start the - reconfiguration process. - - 2. Uses the older, OABI, buildroot toolchain. But that is easily - reconfigured: + 1. This configuration uses the older, OABI, buildroot toolchain. But + that is easily reconfigured: CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain - 3. At the end of the build, there will be several files in the top-level + 2. At the end of the build, there will be several files in the top-level NuttX build directory: PASS1: @@ -438,7 +446,7 @@ must be is one of the following: The J-Link programmer will except files in .hex, .mot, .srec, and .bin formats. - 4. Combining .hex files. If you plan to use the .hex files with your + 3. Combining .hex files. If you plan to use the .hex files with your debugger or FLASH utility, then you may need to combine the two hex files into a single .hex file. Here is how you can do that. @@ -486,18 +494,71 @@ must be is one of the following: Configures the NuttShell (nsh) located at examples/nsh. The Configuration enables both the serial and telnetd NSH interfaces. + NOTES: + + 1. This configuration uses the older, OABI, buildroot toolchain. But + that is easily reconfigured: + + System Type: + CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain + CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain + + 2. NSH built-in applications are supported. However, there are + no built-in applications built with the default configuration. + + Binary Formats: + CONFIG_BUILTIN=y : Enable support for built-in programs + + Applicaton Configuration: + CONFIG_NSH_BUILTIN_APPS=y : Enable starting apps from NSH command line + + 3. This configuration has been used for verifying the touchscreen on + on the SAM3U-EK LCD. With these modifications, you can include the + touchscreen test program at apps/examples/touchscreen as an NSH built-in + application. You can enable the touchscreen and test by modifying the + default configuration in the following ways: + + Drivers: + CONFIG_INPUT=y : Enable support for input devices + CONFIG_INPUT_ADS7843E=y : Enable support for the XPT2048 + CONFIG_ADS7843E_SPIDEV=0 : Use SPI for communication + CONFIG_ADS7843E_SPIMODE=0 : Use SPI mode 0 + CONFIG_ADS7843E_THRESHX=39 : These will probably need to be tuned + CONFIG_ADS7843E_THRESHY=51 + CONFIG_SPI=y : Enable SPI support + CONFIG_SPI_EXCHANGE=n : exchange() method is not supported + + System Type: + CONFIG_GPIO_IRQ=y : GPIO interrupt support + CONFIG_GPIOA_IRQ=y : Enable GPIO interrupts from port A + CONFIG_SAM34_SPI=y : Enable support for SPI + + RTOS Features: + CONFIG_DISABLE_SIGNALS=n : Signals are required + + Library Support: + CONFIG_SCHED_WORKQUEUE=y : Work queue support required + + Applicaton Configuration: + CONFIG_EXAMPLES_TOUCHSCREEN=y : Enable the touchscreen built-int test + + Defaults should be okay for related touchscreen settings. Touchscreen + debug output on UART0 can be enabled with: + + Build Setup: + CONFIG_DEBUG=y : Enable debug features + CONFIG_DEBUG_VERBOSE=y : Enable verbose debug output + CONFIG_DEBUG_INPUT=y : Enable debug output from input devices + + NOTE: + As of this writing, the touchscreen is not functional (no + interrupts). More work is needed. + nx: - Configures to use examples/nx using the HX834x LCD hardwar on + Configures to use examples/nx using the HX834x LCD hardware on the SAM3U-EK development board. ostest: This configuration directory, performs a simple OS test using examples/ostest. By default, this project assumes that you are using the DFU bootloader. - - touchscreen: - This configuration implements an NSH configuratin with several - built-in applications. The configuration is called touchscreen - because we intend to use this configuration to develop the - SAM3U-EK touchscreen. However, there is no touchscreen driver - in place as of this writing. diff --git a/nuttx/configs/sam3u-ek/knsh/defconfig b/nuttx/configs/sam3u-ek/knsh/defconfig index d2f4cc23b..8411ea3c7 100644 --- a/nuttx/configs/sam3u-ek/knsh/defconfig +++ b/nuttx/configs/sam3u-ek/knsh/defconfig @@ -85,6 +85,7 @@ CONFIG_ARCH_CORTEXM3=y CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="sam34" # CONFIG_ARMV7M_USEBASEPRI is not set +# CONFIG_ARCH_HAVE_FPU is not set CONFIG_ARCH_HAVE_MPU=y CONFIG_ARMV7M_MPU=y CONFIG_ARMV7M_MPU_NREGIONS=8 @@ -97,37 +98,76 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y # CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set # CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set CONFIG_ARMV7M_OABI_TOOLCHAIN=y +# CONFIG_GPIO_IRQ is not set # CONFIG_SDIO_DMA is not set # CONFIG_SDIO_WIDTH_D1_ONLY is not set # -# AT91SAM3/SAM4 Configuration Options +# AT91SAM3/4 Configuration Options # CONFIG_ARCH_CHIP_AT91SAM3U4E=y +# CONFIG_ARCH_CHIP_SAM34_NDMACHANC2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S16C is not set +# CONFIG_ARCH_CHIP_ATSAM4S16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S8C is not set +# CONFIG_ARCH_CHIP_ATSAM4S8B is not set CONFIG_ARCH_CHIP_SAM3U=y - -# -# AT91SAM3 Peripheral Support -# -# CONFIG_SAM34_DMA is not set -# CONFIG_SAM34_NAND is not set -# CONFIG_SAM34_HSMCI is not set +# CONFIG_ARCH_CHIP_SAM4L is not set +# CONFIG_ARCH_CHIP_SAM4S is not set + +# +# AT91SAM3/4 Peripheral Support +# +# CONFIG_SAM34_SPI is not set +# CONFIG_SAM34_SSC is not set +# CONFIG_SAM34_TC0 is not set +# CONFIG_SAM34_TC1 is not set +# CONFIG_SAM34_TC2 is not set +# CONFIG_SAM34_PWM is not set +# CONFIG_SAM34_TWIM0 is not set +# CONFIG_SAM34_TWIS0 is not set +# CONFIG_SAM34_TWIM1 is not set +# CONFIG_SAM34_TWIS1 is not set CONFIG_SAM34_UART0=y # CONFIG_SAM34_USART0 is not set # CONFIG_SAM34_USART1 is not set # CONFIG_SAM34_USART2 is not set # CONFIG_SAM34_USART3 is not set +# CONFIG_SAM34_ADC12B is not set +# CONFIG_SAM34_ADC is not set +# CONFIG_SAM34_SMC is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_UDPHS is not set +# CONFIG_SAM34_RTC is not set +# CONFIG_SAM34_RTT is not set +# CONFIG_SAM34_WDT is not set +# CONFIG_SAM34_HSMCI is not set # -# AT91SAM3 UART Configuration +# AT91SAM3/4 USART Configuration # # -# AT91SAM3 GPIO Interrupt Configuration +# AT91SAM3/4 GPIO Interrupt Configuration # -# CONFIG_GPIOA_IRQ is not set -# CONFIG_GPIOB_IRQ is not set -# CONFIG_GPIOC_IRQ is not set # # External Memory Configuration @@ -145,7 +185,8 @@ CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_HAVE_VFORK=y CONFIG_ARCH_STACKDUMP=y # CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +# CONFIG_ARCH_RAMFUNCS is not set CONFIG_ARCH_HAVE_RAMVECTORS=y # CONFIG_ARCH_RAMVECTORS is not set @@ -312,6 +353,10 @@ CONFIG_UART0_BAUD=115200 CONFIG_UART0_BITS=8 CONFIG_UART0_PARITY=0 CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set # CONFIG_USBDEV is not set # CONFIG_USBHOST is not set # CONFIG_WIRELESS is not set @@ -588,6 +633,7 @@ CONFIG_NSH_DISABLE_PS=y CONFIG_NSH_CODECS_BUFSIZE=128 CONFIG_NSH_FILEIOSIZE=512 CONFIG_NSH_LINELEN=64 +CONFIG_NSH_MAXARGUMENTS=6 CONFIG_NSH_NESTDEPTH=3 # CONFIG_NSH_DISABLESCRIPT is not set # CONFIG_NSH_DISABLEBG is not set diff --git a/nuttx/configs/sam3u-ek/nsh/defconfig b/nuttx/configs/sam3u-ek/nsh/defconfig index de9ba6935..2f0e524ab 100644 --- a/nuttx/configs/sam3u-ek/nsh/defconfig +++ b/nuttx/configs/sam3u-ek/nsh/defconfig @@ -92,6 +92,7 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y # CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set # CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set CONFIG_ARMV7M_OABI_TOOLCHAIN=y +# CONFIG_GPIO_IRQ is not set # # AT91SAM3/4 Configuration Options @@ -109,16 +110,16 @@ CONFIG_ARCH_CHIP_AT91SAM3U4E=y # CONFIG_ARCH_CHIP_ATSAM4LS4C is not set # CONFIG_ARCH_CHIP_ATSAM4LS4B is not set # CONFIG_ARCH_CHIP_ATSAM4LS4A is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD32C is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD32B is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD16C is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD16B is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SA16C is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SA16B is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S16C is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S16B is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S8C is not set -# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S8B is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S16C is not set +# CONFIG_ARCH_CHIP_ATSAM4S16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S8C is not set +# CONFIG_ARCH_CHIP_ATSAM4S8B is not set CONFIG_ARCH_CHIP_SAM3U=y # CONFIG_ARCH_CHIP_SAM4L is not set # CONFIG_ARCH_CHIP_SAM4S is not set @@ -127,13 +128,28 @@ CONFIG_ARCH_CHIP_SAM3U=y # AT91SAM3/4 Peripheral Support # # CONFIG_SAM34_SPI is not set +# CONFIG_SAM34_SSC is not set +# CONFIG_SAM34_TC0 is not set +# CONFIG_SAM34_TC1 is not set +# CONFIG_SAM34_TC2 is not set +# CONFIG_SAM34_PWM is not set +# CONFIG_SAM34_TWIM0 is not set +# CONFIG_SAM34_TWIS0 is not set +# CONFIG_SAM34_TWIM1 is not set +# CONFIG_SAM34_TWIS1 is not set CONFIG_SAM34_UART0=y # CONFIG_SAM34_USART0 is not set # CONFIG_SAM34_USART1 is not set # CONFIG_SAM34_USART2 is not set # CONFIG_SAM34_USART3 is not set +# CONFIG_SAM34_ADC12B is not set +# CONFIG_SAM34_ADC is not set +# CONFIG_SAM34_SMC is not set # CONFIG_SAM34_NAND is not set # CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_UDPHS is not set +# CONFIG_SAM34_RTC is not set +# CONFIG_SAM34_RTT is not set # CONFIG_SAM34_WDT is not set # CONFIG_SAM34_HSMCI is not set @@ -144,9 +160,6 @@ CONFIG_SAM34_UART0=y # # AT91SAM3/4 GPIO Interrupt Configuration # -# CONFIG_GPIOA_IRQ is not set -# CONFIG_GPIOB_IRQ is not set -# CONFIG_GPIOC_IRQ is not set # # External Memory Configuration @@ -355,6 +368,7 @@ CONFIG_FS_FAT=y # CONFIG_FS_NXFFS is not set # CONFIG_FS_ROMFS is not set # CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set # # System Logging @@ -387,7 +401,7 @@ CONFIG_MM_REGIONS=3 # CONFIG_BINFMT_EXEPATH is not set # CONFIG_NXFLAT is not set # CONFIG_ELF is not set -# CONFIG_BUILTIN is not set +CONFIG_BUILTIN=y # CONFIG_PIC is not set # CONFIG_SYMTAB_ORDEREDBYNAME is not set @@ -440,6 +454,7 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512 # # Built-In Applications # +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 # # Examples @@ -475,7 +490,6 @@ CONFIG_EXAMPLES_NSH=y # CONFIG_EXAMPLES_OSTEST is not set # CONFIG_EXAMPLES_PASHELLO is not set # CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POLL is not set # CONFIG_EXAMPLES_POSIXSPAWN is not set # CONFIG_EXAMPLES_QENCODER is not set # CONFIG_EXAMPLES_RGMP is not set @@ -483,6 +497,7 @@ CONFIG_EXAMPLES_NSH=y # CONFIG_EXAMPLES_SENDMAIL is not set # CONFIG_EXAMPLES_SERLOOP is not set # CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set # CONFIG_EXAMPLES_SMART is not set # CONFIG_EXAMPLES_TCPECHO is not set # CONFIG_EXAMPLES_TELNETD is not set @@ -537,6 +552,7 @@ CONFIG_EXAMPLES_NSH=y # NSH Library # CONFIG_NSH_LIBRARY=y +CONFIG_NSH_BUILTIN_APPS=y # # Disable Individual commands @@ -598,7 +614,7 @@ CONFIG_NSH_CONSOLE=y # USB Trace Support # # CONFIG_NSH_CONDEV is not set -# CONFIG_NSH_ARCHINIT is not set +CONFIG_NSH_ARCHINIT=y # # NxWidgets/NxWM diff --git a/nuttx/configs/sam3u-ek/nx/defconfig b/nuttx/configs/sam3u-ek/nx/defconfig index d1cf4ebca..bce6f444a 100644 --- a/nuttx/configs/sam3u-ek/nx/defconfig +++ b/nuttx/configs/sam3u-ek/nx/defconfig @@ -80,6 +80,7 @@ CONFIG_ARCH_CORTEXM3=y CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="sam34" # CONFIG_ARMV7M_USEBASEPRI is not set +# CONFIG_ARCH_HAVE_FPU is not set CONFIG_ARCH_HAVE_MPU=y # CONFIG_ARMV7M_MPU is not set @@ -91,35 +92,74 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y # CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set # CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set CONFIG_ARMV7M_OABI_TOOLCHAIN=y +# CONFIG_GPIO_IRQ is not set # -# AT91SAM3/SAM4 Configuration Options +# AT91SAM3/4 Configuration Options # CONFIG_ARCH_CHIP_AT91SAM3U4E=y +# CONFIG_ARCH_CHIP_SAM34_NDMACHANC2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S16C is not set +# CONFIG_ARCH_CHIP_ATSAM4S16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S8C is not set +# CONFIG_ARCH_CHIP_ATSAM4S8B is not set CONFIG_ARCH_CHIP_SAM3U=y - -# -# AT91SAM3 Peripheral Support -# -# CONFIG_SAM34_DMA is not set -# CONFIG_SAM34_NAND is not set -# CONFIG_SAM34_HSMCI is not set +# CONFIG_ARCH_CHIP_SAM4L is not set +# CONFIG_ARCH_CHIP_SAM4S is not set + +# +# AT91SAM3/4 Peripheral Support +# +# CONFIG_SAM34_SPI is not set +# CONFIG_SAM34_SSC is not set +# CONFIG_SAM34_TC0 is not set +# CONFIG_SAM34_TC1 is not set +# CONFIG_SAM34_TC2 is not set +# CONFIG_SAM34_PWM is not set +# CONFIG_SAM34_TWIM0 is not set +# CONFIG_SAM34_TWIS0 is not set +# CONFIG_SAM34_TWIM1 is not set +# CONFIG_SAM34_TWIS1 is not set CONFIG_SAM34_UART0=y # CONFIG_SAM34_USART0 is not set # CONFIG_SAM34_USART1 is not set # CONFIG_SAM34_USART2 is not set # CONFIG_SAM34_USART3 is not set +# CONFIG_SAM34_ADC12B is not set +# CONFIG_SAM34_ADC is not set +# CONFIG_SAM34_SMC is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_UDPHS is not set +# CONFIG_SAM34_RTC is not set +# CONFIG_SAM34_RTT is not set +# CONFIG_SAM34_WDT is not set +# CONFIG_SAM34_HSMCI is not set # -# AT91SAM3 UART Configuration +# AT91SAM3/4 USART Configuration # # -# AT91SAM3 GPIO Interrupt Configuration +# AT91SAM3/4 GPIO Interrupt Configuration # -# CONFIG_GPIOA_IRQ is not set -# CONFIG_GPIOB_IRQ is not set -# CONFIG_GPIOC_IRQ is not set # # External Memory Configuration @@ -137,7 +177,8 @@ CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_HAVE_VFORK=y CONFIG_ARCH_STACKDUMP=y # CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +# CONFIG_ARCH_RAMFUNCS is not set CONFIG_ARCH_HAVE_RAMVECTORS=y # CONFIG_ARCH_RAMVECTORS is not set @@ -281,8 +322,8 @@ CONFIG_LCD_MAXPOWER=31 # CONFIG_LCD_ST7567 is not set # CONFIG_LCD_UG2864AMBAG01 is not set # CONFIG_LCD_SSD1289 is not set -CONFIG_LCD_LANDSCAPE=y -# CONFIG_LCD_PORTRAIT is not set +# CONFIG_LCD_LANDSCAPE is not set +CONFIG_LCD_PORTRAIT=y # CONFIG_LCD_RPORTRAIT is not set # CONFIG_LCD_RLANDSCAPE is not set @@ -314,6 +355,10 @@ CONFIG_UART0_BAUD=115200 CONFIG_UART0_BITS=8 CONFIG_UART0_PARITY=0 CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set # CONFIG_USBDEV is not set # CONFIG_USBHOST is not set # CONFIG_WIRELESS is not set diff --git a/nuttx/configs/sam3u-ek/ostest/defconfig b/nuttx/configs/sam3u-ek/ostest/defconfig index 622ece5de..1cf406a93 100644 --- a/nuttx/configs/sam3u-ek/ostest/defconfig +++ b/nuttx/configs/sam3u-ek/ostest/defconfig @@ -80,6 +80,7 @@ CONFIG_ARCH_CORTEXM3=y CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="sam34" # CONFIG_ARMV7M_USEBASEPRI is not set +# CONFIG_ARCH_HAVE_FPU is not set CONFIG_ARCH_HAVE_MPU=y # CONFIG_ARMV7M_MPU is not set @@ -91,35 +92,74 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y # CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set # CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set CONFIG_ARMV7M_OABI_TOOLCHAIN=y +# CONFIG_GPIO_IRQ is not set # -# AT91SAM3/SAM4 Configuration Options +# AT91SAM3/4 Configuration Options # CONFIG_ARCH_CHIP_AT91SAM3U4E=y +# CONFIG_ARCH_CHIP_SAM34_NDMACHANC2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S16C is not set +# CONFIG_ARCH_CHIP_ATSAM4S16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S8C is not set +# CONFIG_ARCH_CHIP_ATSAM4S8B is not set CONFIG_ARCH_CHIP_SAM3U=y - -# -# AT91SAM3 Peripheral Support -# -# CONFIG_SAM34_DMA is not set -# CONFIG_SAM34_NAND is not set -# CONFIG_SAM34_HSMCI is not set +# CONFIG_ARCH_CHIP_SAM4L is not set +# CONFIG_ARCH_CHIP_SAM4S is not set + +# +# AT91SAM3/4 Peripheral Support +# +# CONFIG_SAM34_SPI is not set +# CONFIG_SAM34_SSC is not set +# CONFIG_SAM34_TC0 is not set +# CONFIG_SAM34_TC1 is not set +# CONFIG_SAM34_TC2 is not set +# CONFIG_SAM34_PWM is not set +# CONFIG_SAM34_TWIM0 is not set +# CONFIG_SAM34_TWIS0 is not set +# CONFIG_SAM34_TWIM1 is not set +# CONFIG_SAM34_TWIS1 is not set CONFIG_SAM34_UART0=y # CONFIG_SAM34_USART0 is not set # CONFIG_SAM34_USART1 is not set # CONFIG_SAM34_USART2 is not set # CONFIG_SAM34_USART3 is not set +# CONFIG_SAM34_ADC12B is not set +# CONFIG_SAM34_ADC is not set +# CONFIG_SAM34_SMC is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_UDPHS is not set +# CONFIG_SAM34_RTC is not set +# CONFIG_SAM34_RTT is not set +# CONFIG_SAM34_WDT is not set +# CONFIG_SAM34_HSMCI is not set # -# AT91SAM3 UART Configuration +# AT91SAM3/4 USART Configuration # # -# AT91SAM3 GPIO Interrupt Configuration +# AT91SAM3/4 GPIO Interrupt Configuration # -# CONFIG_GPIOA_IRQ is not set -# CONFIG_GPIOB_IRQ is not set -# CONFIG_GPIOC_IRQ is not set # # External Memory Configuration @@ -137,7 +177,8 @@ CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_HAVE_VFORK=y CONFIG_ARCH_STACKDUMP=y # CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +# CONFIG_ARCH_RAMFUNCS is not set CONFIG_ARCH_HAVE_RAMVECTORS=y # CONFIG_ARCH_RAMVECTORS is not set @@ -286,6 +327,10 @@ CONFIG_UART0_BAUD=115200 CONFIG_UART0_BITS=8 CONFIG_UART0_PARITY=0 CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set # CONFIG_USBDEV is not set # CONFIG_USBHOST is not set # CONFIG_WIRELESS is not set @@ -429,7 +474,6 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512 # CONFIG_EXAMPLES_NXLINES is not set # CONFIG_EXAMPLES_NXTEXT is not set CONFIG_EXAMPLES_OSTEST=y -# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set CONFIG_EXAMPLES_OSTEST_LOOPS=1 CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 diff --git a/nuttx/configs/sam3u-ek/src/Makefile b/nuttx/configs/sam3u-ek/src/Makefile index 8dbf0eae5..788a50620 100644 --- a/nuttx/configs/sam3u-ek/src/Makefile +++ b/nuttx/configs/sam3u-ek/src/Makefile @@ -42,7 +42,7 @@ AOBJS = $(ASRCS:.S=$(OBJEXT)) CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c -ifeq ($(CONFIG_SAM34_HSMCI),y) +ifeq ($(CONFIG_LCD),y) CSRCS += up_lcd.c endif diff --git a/nuttx/configs/sam3u-ek/src/sam3u-ek.h b/nuttx/configs/sam3u-ek/src/sam3u-ek.h index 21e0e2649..df53985cf 100644 --- a/nuttx/configs/sam3u-ek/src/sam3u-ek.h +++ b/nuttx/configs/sam3u-ek/src/sam3u-ek.h @@ -138,7 +138,12 @@ #define GPIO_LCD_BKL (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_OUTPUT_CLEAR|GPIO_PORT_PIOC|GPIO_PIN19) -/* Touchscreen controller (TSC) */ +/* Touchscreen controller (TSC) + * + * BUSY is high impedance when CS is high (not selected). When CS is + * is low, BUSY is active high. Since the pin is pulled up, it will appear + * busy if CS is not selected. + */ #define GPIO_TCS_IRQ (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN24) #define GPIO_TCS_BUSY (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN2) diff --git a/nuttx/configs/sam3u-ek/src/up_lcd.c b/nuttx/configs/sam3u-ek/src/up_lcd.c index ebeb35d91..5951f7a18 100644 --- a/nuttx/configs/sam3u-ek/src/up_lcd.c +++ b/nuttx/configs/sam3u-ek/src/up_lcd.c @@ -88,7 +88,7 @@ * other custom usage). * * The SAM3U4E communicates with the LCD through PIOB where a 16-bit parallel - * “8080-like” protocol data bus has to be implemented by software. + * 8080-like protocol data bus has to be implemented by software. * * LCD backlight is made of 4 white chip LEDs in parallel, driven by an AAT3194 * charge pump, MN4. The AAT3194 is controlled by the SAM3U4E through a single line @@ -125,7 +125,7 @@ #include "up_arch.h" #include "sam_gpio.h" -#include "chip/sam_pmc.h" +#include "chip/sam3u_pmc.h" #include "chip/sam_smc.h" #include "sam3u-ek.h" @@ -910,7 +910,7 @@ int up_lcdinitialize(void) putreg32(regval, SAM_SMCCS_SETUP(2)); regval = (5 << SMCCS_PULSE_NWEPULSE_SHIFT) | (18 << SMCCS_PULSE_NCSWRPULSE_SHIFT) | - (5 << SMCCS_PULSE_RDPULSE_SHIFT) | (18 << SMCCS_PULSE_NCSRDPULSE_SHIFT); + (5 << SMCCS_PULSE_NRDPULSE_SHIFT) | (18 << SMCCS_PULSE_NCSRDPULSE_SHIFT); putreg32(regval, SAM_SMCCS_PULSE(2)); regval = (22 << SMCCS_CYCLE_NWECYCLE_SHIFT) | (22 << SMCCS_CYCLE_NRDCYCLE_SHIFT); diff --git a/nuttx/configs/sam3u-ek/src/up_nsh.c b/nuttx/configs/sam3u-ek/src/up_nsh.c index dfa296117..ded7d5527 100644 --- a/nuttx/configs/sam3u-ek/src/up_nsh.c +++ b/nuttx/configs/sam3u-ek/src/up_nsh.c @@ -50,8 +50,6 @@ #include "sam_hsmci.h" #include "sam3u-ek.h" -#ifdef CONFIG_SAM34_HSMCI - /**************************************************************************** * Pre-Processor Definitions ****************************************************************************/ @@ -63,19 +61,10 @@ #define NSH_HAVE_USBDEV 1 #define NSH_HAVE_MMCSD 1 -#if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0 -# error "Only one MMC/SD slot" -# undef CONFIG_NSH_MMCSDSLOTNO -#endif - -#ifndef CONFIG_NSH_MMCSDSLOTNO -# define CONFIG_NSH_MMCSDSLOTNO 0 -#endif - -/* Can't support USB features if USB is not enabled */ +/* Can't support MMC/SD if the card interface is not enable */ -#ifndef CONFIG_USBDEV -# undef NSH_HAVE_USBDEV +#ifndef CONFIG_SAM34_HSMCI +# undef NSH_HAVE_MMCSD #endif /* Can't support MMC/SD features if mountpoints are disabled or if SDIO support @@ -86,8 +75,25 @@ # undef NSH_HAVE_MMCSD #endif -#ifndef CONFIG_NSH_MMCSDMINOR -# define CONFIG_NSH_MMCSDMINOR 0 +#ifdef NSH_HAVE_MMCSD +# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0 +# error "Only one MMC/SD slot" +# undef CONFIG_NSH_MMCSDSLOTNO +# endif + +# ifndef CONFIG_NSH_MMCSDMINOR +# define CONFIG_NSH_MMCSDMINOR 0 +# endif + +# ifndef CONFIG_NSH_MMCSDSLOTNO +# define CONFIG_NSH_MMCSDSLOTNO 0 +# endif +#endif + +/* Can't support USB features if USB is not enabled */ + +#ifndef CONFIG_USBDEV +# undef NSH_HAVE_USBDEV #endif /* Debug ********************************************************************/ @@ -155,4 +161,3 @@ int nsh_archinitialize(void) #endif return OK; } -#endif diff --git a/nuttx/configs/sam3u-ek/src/up_touchscreen.c b/nuttx/configs/sam3u-ek/src/up_touchscreen.c index 251d9b624..f8b465748 100644 --- a/nuttx/configs/sam3u-ek/src/up_touchscreen.c +++ b/nuttx/configs/sam3u-ek/src/up_touchscreen.c @@ -183,7 +183,9 @@ static bool tsc_busy(FAR struct ads7843e_config_s *state) static bool last = (bool)-1; #endif - /* REVISIT: This might need to be inverted */ + /* BUSY is high impedance when CS is high (not selected). When CS is + * is low, BUSY is active high. + */ bool busy = sam_gpioread(GPIO_TCS_BUSY); #if defined(CONFIG_DEBUG_INPUT) && defined(CONFIG_DEBUG_VERBOSE) diff --git a/nuttx/configs/sam3u-ek/touchscreen/Make.defs b/nuttx/configs/sam3u-ek/touchscreen/Make.defs deleted file mode 100644 index 436d316c8..000000000 --- a/nuttx/configs/sam3u-ek/touchscreen/Make.defs +++ /dev/null @@ -1,109 +0,0 @@ -############################################################################ -# configs/sam3u-ek/touchscreen/Make.defs -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" - MAXOPTIMIZATION = -O2 -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g -else - ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/sam3u-ek/touchscreen/defconfig b/nuttx/configs/sam3u-ek/touchscreen/defconfig deleted file mode 100644 index bc2e2286c..000000000 --- a/nuttx/configs/sam3u-ek/touchscreen/defconfig +++ /dev/null @@ -1,768 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# -CONFIG_NUTTX_NEWCONFIG=y - -# -# Build Setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - -# -# Build Configuration -# -# CONFIG_APPS_DIR="../apps" -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -# CONFIG_INTELHEX_BINARY is not set -# CONFIG_MOTOROLA_SREC is not set -CONFIG_RAW_BINARY=y - -# -# Customize Header Files -# -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG is not set -# CONFIG_DEBUG_SYMBOLS is not set - -# -# System Type -# -# CONFIG_ARCH_8051 is not set -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RGMP is not set -# CONFIG_ARCH_SH is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_IMX is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -# CONFIG_ARCH_CHIP_KL is not set -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -CONFIG_ARCH_CHIP_SAM34=y -# CONFIG_ARCH_CHIP_STM32 is not set -# CONFIG_ARCH_CHIP_STR71X is not set -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_FAMILY="armv7-m" -CONFIG_ARCH_CHIP="sam34" -# CONFIG_ARMV7M_USEBASEPRI is not set -CONFIG_ARCH_HAVE_MPU=y -# CONFIG_ARMV7M_MPU is not set - -# -# ARMV7M Configuration Options -# -CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y -# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set -# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set -# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set -CONFIG_ARMV7M_OABI_TOOLCHAIN=y - -# -# AT91SAM3/SAM4 Configuration Options -# -CONFIG_ARCH_CHIP_AT91SAM3U4E=y -CONFIG_ARCH_CHIP_SAM3U=y - -# -# AT91SAM3 Peripheral Support -# -# CONFIG_SAM34_DMA is not set -# CONFIG_SAM34_NAND is not set -# CONFIG_SAM34_HSMCI is not set -CONFIG_SAM34_UART0=y -# CONFIG_SAM34_USART0 is not set -# CONFIG_SAM34_USART1 is not set -# CONFIG_SAM34_USART2 is not set -# CONFIG_SAM34_USART3 is not set -CONFIG_SAM34_SPI=y - -# -# AT91SAM3 UART Configuration -# - -# -# AT91SAM3 GPIO Interrupt Configuration -# -CONFIG_GPIOA_IRQ=y -# CONFIG_GPIOB_IRQ is not set -# CONFIG_GPIOC_IRQ is not set - -# -# External Memory Configuration -# - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -CONFIG_ARCH_IRQPRIO=y -# CONFIG_CUSTOM_STACK is not set -# CONFIG_ADDRENV is not set -CONFIG_ARCH_HAVE_VFORK=y -CONFIG_ARCH_STACKDUMP=y -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -CONFIG_ARCH_HAVE_RAMVECTORS=y -# CONFIG_ARCH_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=4768 -# CONFIG_ARCH_CALIBRATION is not set -CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_SIZE=32768 -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=0 - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Board Selection -# -CONFIG_ARCH_BOARD_SAM3UEK=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="sam3u-ek" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_HAVE_BUTTONS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_HAVE_IRQBUTTONS=y -# CONFIG_ARCH_IRQBUTTONS is not set -CONFIG_NSH_MMCSDMINOR=0 - -# -# Board-Specific Options -# - -# -# RTOS Features -# -# CONFIG_BOARD_INITIALIZE is not set -CONFIG_MSEC_PER_TICK=10 -CONFIG_RR_INTERVAL=200 -# CONFIG_SCHED_INSTRUMENTATION is not set -CONFIG_TASK_NAME_SIZE=0 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2011 -CONFIG_START_MONTH=9 -CONFIG_START_DAY=30 -CONFIG_DEV_CONSOLE=y -# CONFIG_MUTEX_TYPES is not set -# CONFIG_PRIORITY_INHERITANCE is not set -# CONFIG_FDCLONE_DISABLE is not set -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WAITPID=y -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DISABLE_OS_API=y -# CONFIG_DISABLE_CLOCK is not set -# CONFIG_DISABLE_POSIX_TIMERS is not set -# CONFIG_DISABLE_PTHREAD is not set -# CONFIG_DISABLE_SIGNALS is not set -# CONFIG_DISABLE_MQUEUE is not set -# CONFIG_DISABLE_ENVIRON is not set - -# -# Signal Numbers -# -CONFIG_SIG_SIGUSR1=1 -CONFIG_SIG_SIGUSR2=2 -CONFIG_SIG_SIGALARM=3 -CONFIG_SIG_SIGCONDTIMEDOUT=16 -CONFIG_SIG_SIGWORK=17 - -# -# Sizes of configurable things (0 disables) -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -CONFIG_DEV_NULL=y -# CONFIG_DEV_ZERO is not set -# CONFIG_LOOP is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_PWM is not set -# CONFIG_I2C is not set -CONFIG_SPI=y -# CONFIG_SPI_OWNBUS is not set -CONFIG_SPI_EXCHANGE=y -# CONFIG_SPI_CMDDATA is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_BCH is not set -CONFIG_INPUT=y -# CONFIG_INPUT_TSC2007 is not set -CONFIG_INPUT_ADS7843E=y -# CONFIG_ADS7843E_MULTIPLE is not set -CONFIG_ADS7843E_SPIDEV=0 -CONFIG_ADS7843E_DEVMINOR=0 -CONFIG_ADS7843E_SPIMODE=0 -CONFIG_ADS7843E_FREQUENCY=100000 -# CONFIG_ADS7843E_SWAPXY is not set -CONFIG_ADS7843E_THRESHX=12 -CONFIG_ADS7843E_THRESHY=12 -# CONFIG_INPUT_STMPE811 is not set -CONFIG_LCD=y - -# -# Common LCD Settings -# -# CONFIG_LCD_NOGETRUN is not set -CONFIG_LCD_MAXCONTRAST=1 -CONFIG_LCD_MAXPOWER=31 - -# -# Graphic LCD Devices -# -# CONFIG_LCD_P14201 is not set -# CONFIG_LCD_NOKIA6100 is not set -# CONFIG_LCD_MIO283QT2 is not set -# CONFIG_LCD_UG9664HSWAG01 is not set -# CONFIG_LCD_ST7567 is not set -# CONFIG_LCD_UG2864AMBAG01 is not set -# CONFIG_LCD_SSD1289 is not set -# CONFIG_LCD_LANDSCAPE is not set -CONFIG_LCD_PORTRAIT=y -# CONFIG_LCD_RPORTRAIT is not set -# CONFIG_LCD_RLANDSCAPE is not set - -# -# Alphanumeric/Segment LCD Devices -# -# CONFIG_LCD_LCD1602 is not set -# CONFIG_MMCSD is not set -# CONFIG_MTD is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -CONFIG_SERIAL=y -# CONFIG_DEV_LOWCONSOLE is not set -# CONFIG_16550_UART is not set -CONFIG_ARCH_HAVE_UART0=y -CONFIG_MCU_SERIAL=y -CONFIG_STANDARD_SERIAL=y -CONFIG_UART0_SERIAL_CONSOLE=y -# CONFIG_NO_SERIAL_CONSOLE is not set - -# -# UART0 Configuration -# -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART0_2STOP=0 -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_WIRELESS is not set - -# -# System Logging Device Options -# - -# -# System Logging -# -# CONFIG_RAMLOG is not set - -# -# Networking Support -# -# CONFIG_NET is not set - -# -# File Systems -# - -# -# File system configuration -# -# CONFIG_DISABLE_MOUNTPOINT is not set -# CONFIG_FS_RAMMAP is not set -CONFIG_FS_FAT=y -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -# CONFIG_FS_FATTIME is not set -# CONFIG_FAT_DMAMEMORY is not set -# CONFIG_FS_NXFFS is not set -# CONFIG_FS_ROMFS is not set -# CONFIG_FS_SMARTFS is not set -# CONFIG_FS_BINFS is not set - -# -# System Logging -# -# CONFIG_SYSLOG_ENABLE is not set -# CONFIG_SYSLOG is not set - -# -# Graphics Support -# -CONFIG_NX=y -CONFIG_NX_LCDDRIVER=y -CONFIG_NX_NPLANES=1 -# CONFIG_NX_WRITEONLY is not set - -# -# Supported Pixel Depths -# -CONFIG_NX_DISABLE_1BPP=y -CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=y -CONFIG_NX_DISABLE_8BPP=y -# CONFIG_NX_DISABLE_16BPP is not set -CONFIG_NX_DISABLE_24BPP=y -CONFIG_NX_DISABLE_32BPP=y -# CONFIG_NX_PACKEDMSFIRST is not set - -# -# Input Devices -# -CONFIG_NX_MOUSE=y -CONFIG_NX_KBD=y - -# -# Framed Window Borders -# -CONFIG_NXTK_BORDERWIDTH=4 -CONFIG_NXTK_BORDERCOLOR1=0 -CONFIG_NXTK_BORDERCOLOR2=0 -CONFIG_NXTK_BORDERCOLOR3=0 -# CONFIG_NXTK_AUTORAISE is not set - -# -# Font Selections -# -CONFIG_NXFONTS_CHARBITS=7 -# CONFIG_NXFONT_MONO5X8 is not set -# CONFIG_NXFONT_SANS17X22 is not set -# CONFIG_NXFONT_SANS20X26 is not set -CONFIG_NXFONT_SANS23X27=y -# CONFIG_NXFONT_SANS22X29 is not set -# CONFIG_NXFONT_SANS28X37 is not set -# CONFIG_NXFONT_SANS39X48 is not set -# CONFIG_NXFONT_SANS17X23B is not set -# CONFIG_NXFONT_SANS20X27B is not set -# CONFIG_NXFONT_SANS22X29B is not set -# CONFIG_NXFONT_SANS28X37B is not set -# CONFIG_NXFONT_SANS40X49B is not set -# CONFIG_NXFONT_SERIF22X29 is not set -# CONFIG_NXFONT_SERIF29X37 is not set -# CONFIG_NXFONT_SERIF38X48 is not set -# CONFIG_NXFONT_SERIF22X28B is not set -# CONFIG_NXFONT_SERIF27X38B is not set -# CONFIG_NXFONT_SERIF38X49B is not set -# CONFIG_NXCONSOLE is not set - -# -# NX Multi-user only options -# -# CONFIG_NX_MULTIUSER is not set - -# -# Memory Management -# -# CONFIG_MM_MULTIHEAP is not set -# CONFIG_MM_SMALL is not set -CONFIG_MM_REGIONS=3 -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Binary Formats -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_BINFMT_EXEPATH is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -CONFIG_BUILTIN=y -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=2 -CONFIG_LIB_HOMEDIR="/" -# CONFIG_LIBM is not set -# CONFIG_NOPRINTF_FIELDWIDTH is not set -# CONFIG_LIBC_FLOATINGPOINT is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set - -# -# Non-standard Library Support -# -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_HPWORK=y -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -# CONFIG_SCHED_LPWORK is not set -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -# CONFIG_HAVE_CXX is not set - -# -# Application Configuration -# - -# -# Built-In Applications -# -CONFIG_BUILTIN_PROXY_STACKSIZE=1024 - -# -# Examples -# -# CONFIG_EXAMPLES_BUTTONS is not set -# CONFIG_EXAMPLES_CAN is not set -# CONFIG_EXAMPLES_COMPOSITE is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HELLOXX is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_LCDRW is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -CONFIG_EXAMPLES_NSH=y -# CONFIG_EXAMPLES_NULL is not set -CONFIG_EXAMPLES_NX=y -CONFIG_EXAMPLES_NX_BUILTIN=y -CONFIG_EXAMPLES_NX_VPLANE=0 -CONFIG_EXAMPLES_NX_DEVNO=0 -# CONFIG_EXAMPLES_NX_DEFAULT_COLORS is not set -CONFIG_EXAMPLES_NX_BGCOLOR=0x7b5d -CONFIG_EXAMPLES_NX_COLOR1=0xe73f -CONFIG_EXAMPLES_NX_COLOR2=0xdefb -CONFIG_EXAMPLES_NX_TBCOLOR=0xad55 -CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000 -CONFIG_EXAMPLES_NX_DEFAULT_FONT=y -CONFIG_EXAMPLES_NX_BPP=16 -# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set -# CONFIG_EXAMPLES_NX_EXTERNINIT is not set -# CONFIG_EXAMPLES_NXCONSOLE is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXFLAT is not set -CONFIG_EXAMPLES_NXHELLO=y -CONFIG_EXAMPLES_NXHELLO_VPLANE=0 -CONFIG_EXAMPLES_NXHELLO_DEVNO=0 -CONFIG_EXAMPLES_NXHELLO_BPP=16 - -# -# Example Color Configuration -# -# CONFIG_EXAMPLES_NXHELLO_DEFAULT_COLORS is not set -CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011 -CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf - -# -# Example Font Configuration -# -# CONFIG_EXAMPLES_NXHELLO_DEFAULT_FONT is not set -CONFIG_EXAMPLES_NXHELLO_FONTID=6 -# CONFIG_EXAMPLES_NXHELLO_EXTERNINIT is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTEXT is not set -# CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PASHELLO is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_QENCODER is not set -# CONFIG_EXAMPLES_RGMP is not set -# CONFIG_EXAMPLES_ROMFS is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART_TEST is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_THTTPD is not set -# CONFIG_EXAMPLES_TIFF is not set -CONFIG_EXAMPLES_TOUCHSCREEN=y -CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0 -CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0" -CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25 -# CONFIG_EXAMPLES_UDP is not set -# CONFIG_EXAMPLES_UIP is not set -# CONFIG_EXAMPLES_USBSERIAL is not set -# CONFIG_EXAMPLES_USBMSC is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# Network Utilities -# - -# -# Networking Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_DHCPC is not set -# CONFIG_NETUTILS_DHCPD is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_FTPD is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_RESOLV is not set -# CONFIG_NETUTILS_SMTP is not set -# CONFIG_NETUTILS_TELNETD is not set -# CONFIG_NETUTILS_TFTPC is not set -# CONFIG_NETUTILS_THTTPD is not set -# CONFIG_NETUTILS_UIPLIB is not set -# CONFIG_NETUTILS_WEBCLIENT is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# NSH Library -# -CONFIG_NSH_LIBRARY=y -CONFIG_NSH_BUILTIN_APPS=y - -# -# Disable Individual commands -# -# CONFIG_NSH_DISABLE_CAT is not set -# CONFIG_NSH_DISABLE_CD is not set -# CONFIG_NSH_DISABLE_CP is not set -# CONFIG_NSH_DISABLE_DD is not set -# CONFIG_NSH_DISABLE_ECHO is not set -# CONFIG_NSH_DISABLE_EXEC is not set -# CONFIG_NSH_DISABLE_EXIT is not set -# CONFIG_NSH_DISABLE_FREE is not set -# CONFIG_NSH_DISABLE_GET is not set -# CONFIG_NSH_DISABLE_HELP is not set -# CONFIG_NSH_DISABLE_HEXDUMP is not set -# CONFIG_NSH_DISABLE_IFCONFIG is not set -# CONFIG_NSH_DISABLE_KILL is not set -# CONFIG_NSH_DISABLE_LOSETUP is not set -# CONFIG_NSH_DISABLE_LS is not set -# CONFIG_NSH_DISABLE_MB is not set -# CONFIG_NSH_DISABLE_MKDIR is not set -# CONFIG_NSH_DISABLE_MKFATFS is not set -# CONFIG_NSH_DISABLE_MKFIFO is not set -# CONFIG_NSH_DISABLE_MKRD is not set -# CONFIG_NSH_DISABLE_MH is not set -# CONFIG_NSH_DISABLE_MOUNT is not set -# CONFIG_NSH_DISABLE_MW is not set -# CONFIG_NSH_DISABLE_NSFMOUNT is not set -# CONFIG_NSH_DISABLE_PS is not set -# CONFIG_NSH_DISABLE_PING is not set -# CONFIG_NSH_DISABLE_PUT is not set -# CONFIG_NSH_DISABLE_PWD is not set -# CONFIG_NSH_DISABLE_RM is not set -# CONFIG_NSH_DISABLE_RMDIR is not set -# CONFIG_NSH_DISABLE_SET is not set -# CONFIG_NSH_DISABLE_SH is not set -# CONFIG_NSH_DISABLE_SLEEP is not set -# CONFIG_NSH_DISABLE_TEST is not set -# CONFIG_NSH_DISABLE_UMOUNT is not set -# CONFIG_NSH_DISABLE_UNSET is not set -# CONFIG_NSH_DISABLE_USLEEP is not set -# CONFIG_NSH_DISABLE_WGET is not set -# CONFIG_NSH_DISABLE_XD is not set - -# -# Configure Command Options -# -# CONFIG_NSH_CMDOPT_DF_H is not set -CONFIG_NSH_CODECS_BUFSIZE=128 -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -# CONFIG_NSH_DISABLESCRIPT is not set -# CONFIG_NSH_DISABLEBG is not set -CONFIG_NSH_CONSOLE=y - -# -# USB Trace Support -# -# CONFIG_NSH_CONDEV is not set -# CONFIG_NSH_ARCHINIT is not set - -# -# NxWidgets/NxWM -# - -# -# System NSH Add-Ons -# - -# -# Custom Free Memory Command -# -# CONFIG_SYSTEM_FREE is not set - -# -# I2C tool -# - -# -# FLASH Program Installation -# -# CONFIG_SYSTEM_INSTALL is not set - -# -# FLASH Erase-all Command -# - -# -# readline() -# -CONFIG_SYSTEM_READLINE=y -CONFIG_READLINE_ECHO=y - -# -# Power Off -# -# CONFIG_SYSTEM_POWEROFF is not set - -# -# RAMTRON -# -# CONFIG_SYSTEM_RAMTRON is not set - -# -# SD Card -# -# CONFIG_SYSTEM_SDCARD is not set - -# -# Sysinfo -# -# CONFIG_SYSTEM_SYSINFO is not set - -# -# USB Monitor -# diff --git a/nuttx/configs/sam3u-ek/touchscreen/setenv.sh b/nuttx/configs/sam3u-ek/touchscreen/setenv.sh deleted file mode 100755 index 868c4de38..000000000 --- a/nuttx/configs/sam3u-ek/touchscreen/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/sam3u-ek/toolchain/setenv.sh -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" - |