Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular

9 files changed, 1697 insertions, 0 deletions

diff --git a/nuttx/configs/sama5d3x-ek/Kconfig b/nuttx/configs/sama5d3x-ek/Kconfig
new file mode 100644
index 000000000..49a717540
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/Kconfig
@@ -0,0 +1,7 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_SAMA5D3X_EK
+endif
diff --git a/nuttx/configs/sama5d3x-ek/README.txt b/nuttx/configs/sama5d3x-ek/README.txt
new file mode 100644
index 000000000..8da6d528b
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/README.txt
@@ -0,0 +1,474 @@
+README
+=====
+
+  This README file describes the port of NuttX to the SAMA5D3x-EK
+  development boards. These boards feature the Atmel SAMA5D3
+  microprocessors.
+
+Contents
+========
+
+  - Configurations
+
+Contents
+^^^^^^^^
+
+  - PIO Muliplexing
+  - Development Environment
+  - GNU Toolchain Options
+  - IDEs
+  - NuttX EABI "buildroot" Toolchain
+  - NuttX OABI "buildroot" Toolchain
+  - NXFLAT Toolchain
+  - Buttons and LEDs
+  - Serial Consoles
+  - SAMA5D3x-EK Configuration Options
+  - Configurations
+
+PIO Muliplexing
+===============
+
+  To be provided
+
+Development Environment
+=======================
+
+  Several possibile development enviorments may be use:
+
+  - Linux or OSX native
+  - Cygwin unders Windows
+  - MinGW + MSYS under Windows
+  - Windows native (with GNUMake from GNUWin32).
+
+  All testing has been performed using Cygwin under Windows.
+
+  The source has been built only using the GNU toolchain (see below).  Other
+  toolchains will likely cause problems.
+
+GNU Toolchain Options
+^^^^^^^^^^^^^^^^^^^^^
+
+  The NuttX make system has been modified to support the several different
+  toolchain options.
+
+  All testing has been conducted using the AtmelStudio GCC toolchain.  To use
+  the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to
+  add one of the following configuration options to your .config (or defconfig)
+  file:
+
+    CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_ARMV7A_TOOLCHAIN_ATOLLIC=y        : Atollic toolchain for Windos
+    CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL=y      : Generic GCC ARM EABI toolchain for Linux
+    CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW=y      : Generic GCC ARM EABI toolchain for Windows
+
+  The AtmelStudio GCC toolchain is selected with CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW=y
+  and setting the PATH variable appropriately.
+
+  If you are not using AtmelStudio GCC toolchain, then you may also have to
+  modify the PATH in the setenv.h file if your make cannot find the tools.
+
+  NOTE about Windows native toolchains
+  ------------------------------------
+
+  There are several limitations to using a Windows based toolchain in a
+  Cygwin environment.  The three biggest are:
+
+  1. The Windows toolchain cannot follow Cygwin paths.  Path conversions are
+     performed automatically in the Cygwin makefiles using the 'cygpath'
+     utility but you might easily find some new path problems.  If so, check
+     out 'cygpath -w'
+
+  2. Windows toolchains cannot follow Cygwin symbolic links.  Many symbolic
+     links are used in Nuttx (e.g., include/arch).  The make system works
+     around these problems for the Windows tools by copying directories
+     instead of linking them.  But this can also cause some confusion for
+     you:  For example, you may edit a file in a "linked" directory and find
+     that your changes had no effect.  That is because you are building the
+     copy of the file in the "fake" symbolic directory.  If you use a\
+     Windows toolchain, you should get in the habit of making like this:
+
+       make clean_context all
+
+     An alias in your .bashrc file might make that less painful.
+
+  3. Dependencies are not made when using Windows versions of the GCC.  This is
+     because the dependencies are generated using Windows pathes which do not
+     work with the Cygwin make.
+
+       MKDEP                = $(TOPDIR)/tools/mknulldeps.sh
+
+  NOTE 1: Older CodeSourcery toolchains (2009q1) do not work with default
+  optimization level of -Os (See Make.defs).  It will work with -O0, -O1, or
+  -O2, but not with -Os.
+
+  NOTE 2: The devkitARM toolchain includes a version of MSYS make.  Make sure that
+  the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+  path or will get the wrong version of make.
+
+IDEs
+^^^^
+
+  NuttX is built using command-line make.  It can be used with an IDE, but some
+  effort will be required to create the project (There is a simple RIDE project
+  in the RIDE subdirectory).
+
+  Makefile Build
+  --------------
+  Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+  simply use the NuttX makefile to build the system.  That is almost for free
+  under Linux.  Under Windows, you will need to set up the "Cygwin GCC" empty
+  makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+  there is a lot of help on the internet).
+
+  Native Build
+  ------------
+  Here are a few tips before you start that effort:
+
+  1) Select the toolchain that you will be using in your .config file
+  2) Start the NuttX build at least one time from the Cygwin command line
+     before trying to create your project.  This is necessary to create
+     certain auto-generated files and directories that will be needed.
+  3) Set up include pathes:  You will need include/, arch/arm/src/sam34,
+     arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
+  4) All assembly files need to have the definition option -D __ASSEMBLY__
+     on the command line.
+
+  Startup files will probably cause you some headaches.  The NuttX startup file
+  is arch/arm/src/sam34/sam_vectors.S.  You may need to build NuttX
+  one time from the Cygwin command line in order to obtain the pre-built
+  startup object needed by RIDE.
+
+NuttX EABI "buildroot" Toolchain
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  A GNU GCC-based toolchain is assumed.  The files */setenv.sh should
+  be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+  different from the default in your PATH variable).
+
+  If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+  SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh sama5d3x-ek/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly built binaries.
+
+  See the file configs/README.txt in the buildroot source tree.  That has more
+  details PLUS some special instructions that you will need to follow if you are
+  building a Cortex-M3 toolchain for Cygwin under Windows.
+
+  NOTE:  Unfortunately, the 4.6.3 EABI toolchain is not compatible with the
+  the NXFLAT tools.  See the top-level TODO file (under "Binary loaders") for
+  more information about this problem. If you plan to use NXFLAT, please do not
+  use the GCC 4.6.3 EABI toochain; instead use the GCC 4.3.3 OABI toolchain.
+  See instructions below.
+
+NuttX OABI "buildroot" Toolchain
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The older, OABI buildroot toolchain is also available.  To use the OABI
+  toolchain, use the build instructtions above, but (1) modify the
+  cortexm3-eabi-defconfig-4.6.3 configuration to use OABI (using 'make
+  menuconfig'), or (2) use an exising OABI configuration such as
+  cortexm3-defconfig-4.3.3
+
+NXFLAT Toolchain
+^^^^^^^^^^^^^^^^
+
+  If you are *not* using the NuttX buildroot toolchain and you want to use
+  the NXFLAT tools, then you will still have to build a portion of the buildroot
+  tools -- just the NXFLAT tools.  The buildroot with the NXFLAT tools can
+  be downloaded from the NuttX SourceForge download site
+  (https://sourceforge.net/projects/nuttx/files/).
+
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh sama5d3x-ek/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-defconfig-nxflat .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly built NXFLAT binaries.
+
+Buttons and LEDs
+^^^^^^^^^^^^^^^^
+
+  Buttons
+  -------
+  To be provided
+
+  LEDs
+  ----
+  To be provided
+
+Serial Consoles
+===============
+
+  To be provided
+
+SAMA5D3x-EK Configuration Options
+=================================
+
+  CONFIG_ARCH - Identifies the arch/ subdirectory.  This should
+  be set to:
+
+    CONFIG_ARCH="arm"
+
+  CONFIG_ARCH_family - For use in C code:
+
+    CONFIG_ARCH_ARM=y
+
+  CONFIG_ARCH_architecture - For use in C code:
+
+    CONFIG_ARCH_CORTEXA5=y
+
+  CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+    CONFIG_ARCH_CHIP="sama5"
+
+  CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+  chip:
+
+    CONFIG_ARCH_CHIP_SAMA5=y
+
+  and one of:
+
+   CONFIG_ARCH_CHIP_ATSAMA5D31=y
+   CONFIG_ARCH_CHIP_ATSAMA5D33=y
+   CONFIG_ARCH_CHIP_ATSAMA5D34=y
+   CONFIG_ARCH_CHIP_ATSAMA5D35=y
+
+  CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+  hence, the board that supports the particular chip or SoC.
+
+    CONFIG_ARCH_BOARD="sama5d3x-ek" (for the SAMA5D3x-EK development board)
+
+  CONFIG_ARCH_BOARD_name - For use in C code
+
+    CONFIG_ARCH_BOARD_SAMA5D3X_EK=y
+
+  CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+  of delay loops
+
+  CONFIG_ENDIAN_BIG - define if big endian (default is little
+  endian)
+
+  CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
+
+    CONFIG_DRAM_SIZE=0x0002000 (128Kb)
+
+  CONFIG_DRAM_START - The physical start address of installed DRAM
+
+    CONFIG_DRAM_START=0x20000000
+
+  CONFIG_DRAM_VSTART - The virutal start address of installed DRAM
+
+    CONFIG_DRAM_VSTART=0x20000000
+
+  CONFIG_ARCH_IRQPRIO - The SAM3UF103Z supports interrupt prioritization
+
+    CONFIG_ARCH_IRQPRIO=y
+
+  CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+  have LEDs
+
+  CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+  stack. If defined, this symbol is the size of the interrupt
+  stack in bytes.  If not defined, the user task stacks will be
+  used during interrupt handling.
+
+  CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+  CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+
+  CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+  cause a 100 second delay during boot-up.  This 100 second delay
+  serves no purpose other than it allows you to calibratre
+  CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
+  the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+  the delay actually is 100 seconds.
+
+  Individual subsystems can be enabled:
+
+    CONFIG_SAMA5_DBGU        - Debug Unit Interrupt
+    CONFIG_SAMA5_PIT         - Periodic Interval Timer Interrupt
+    CONFIG_SAMA5_WDT         - Watchdog timer Interrupt
+    CONFIG_SAMA5_HSMC        - Multi-bit ECC Interrupt
+    CONFIG_SAMA5_SMD         - SMD Soft Modem
+    CONFIG_SAMA5_USART0      - USART 0
+    CONFIG_SAMA5_USART1      - USART 1
+    CONFIG_SAMA5_USART2      - USART 2
+    CONFIG_SAMA5_USART3      - USART 3
+    CONFIG_SAMA5_UART0       - UART 0
+    CONFIG_SAMA5_UART1       - UART 1
+    CONFIG_SAMA5_TWI0        - Two-Wire Interface 0
+    CONFIG_SAMA5_TWI1        - Two-Wire Interface 1
+    CONFIG_SAMA5_TWI2        - Two-Wire Interface 2
+    CONFIG_SAMA5_HSMCI0      - High Speed Multimedia Card Interface 0
+    CONFIG_SAMA5_HSMCI1      - High Speed Multimedia Card Interface 1
+    CONFIG_SAMA5_HSMCI2      - High Speed Multimedia Card Interface 2
+    CONFIG_SAMA5_SPI0        - Serial Peripheral Interface 0
+    CONFIG_SAMA5_SPI1        - Serial Peripheral Interface 1
+    CONFIG_SAMA5_TC0         - Timer Counter 0 (ch. 0, 1, 2)
+    CONFIG_SAMA5_TC1         - Timer Counter 1 (ch. 3, 4, 5)
+    CONFIG_SAMA5_PWM         - Pulse Width Modulation Controller
+    CONFIG_SAMA5_ADC         - Touch Screen ADC Controller
+    CONFIG_SAMA5_DMAC0       - DMA Controller 0
+    CONFIG_SAMA5_DMAC1       - DMA Controller 1
+    CONFIG_SAMA5_UHPHS       - USB Host High Speed
+    CONFIG_SAMA5_UDPHS       - USB Device High Speed
+    CONFIG_SAMA5_GMAC        - Gigabit Ethernet MAC
+    CONFIG_SAMA5_EMAC        - Ethernet MAC
+    CONFIG_SAMA5_LCDC        - LCD Controller
+    CONFIG_SAMA5_ISI         - Image Sensor Interface
+    CONFIG_SAMA5_SSC0        - Synchronous Serial Controller 0
+    CONFIG_SAMA5_SSC1        - Synchronous Serial Controller 1
+    CONFIG_SAMA5_CAN0        - CAN controller 0
+    CONFIG_SAMA5_CAN1        - CAN controller 1
+    CONFIG_SAMA5_SHA         - Secure Hash Algorithm
+    CONFIG_SAMA5_AES         - Advanced Encryption Standard
+    CONFIG_SAMA5_TDES        - Triple Data Encryption Standard
+    CONFIG_SAMA5_TRNG        - True Random Number Generator
+    CONFIG_SAMA5_ARM         - Performance Monitor Unit
+    CONFIG_SAMA5_FUSE        - Fuse Controller
+    CONFIG_SAMA5_MPDDRC      - MPDDR controller
+
+  Some subsystems can be configured to operate in different ways. The drivers
+  need to know how to configure the subsystem.
+
+    CONFIG_PIOA_IRQ          - Support PIOA interrupts
+    CONFIG_PIOB_IRQ          - Support PIOB interrupts
+    CONFIG_PIOC_IRQ          - Support PIOD interrupts
+    CONFIG_PIOD_IRQ          - Support PIOD interrupts
+    CONFIG_PIOE_IRQ          - Support PIOE interrupts
+
+    CONFIG_USART0_ISUART     - USART0 is configured as a UART
+    CONFIG_USART1_ISUART     - USART1 is configured as a UART
+    CONFIG_USART2_ISUART     - USART2 is configured as a UART
+    CONFIG_USART3_ISUART     - USART3 is configured as a UART
+
+  ST91SAM4S specific device driver settings
+
+    CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=0,1,2,3) or UART
+           m (m=4,5) for the console and ttys0 (default is the USART1).
+    CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
+       This specific the size of the receive buffer
+    CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
+       being sent.  This specific the size of the transmit buffer
+    CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART.  Must be
+    CONFIG_U[S]ARTn_BITS - The number of bits.  Must be either 7 or 8.
+    CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+    CONFIG_U[S]ARTn_2STOP - Two stop bits
+
+Configurations
+==============
+
+  Information Common to All Configurations
+  ----------------------------------------
+  Each SAM3U-EK configuration is maintained in a sub-directory and
+  can be selected as follow:
+
+    cd tools
+    ./configure.sh sama5d3x-ek/<subdir>
+    cd -
+    . ./setenv.sh
+
+  Before sourcing the setenv.sh file above, you should examine it and perform
+  edits as necessary so that BUILDROOT_BIN is the correct path to the directory
+  than holds your toolchain binaries.
+
+  And then build NuttX by simply typing the following.  At the conclusion of
+  the make, the nuttx binary will reside in an ELF file called, simply, nuttx.
+
+    make
+
+  The <subdir> that is provided above as an argument to the tools/configure.sh
+  must be is one of the following.
+
+  NOTES:
+
+  1. These configurations use the mconf-based configuration tool.  To
+    change any of these configurations using that tool, you should:
+
+    a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+       and misc/tools/
+
+    b. Execute 'make menuconfig' in nuttx/ in order to start the
+       reconfiguration process.
+
+  2. Unless stated otherwise, all configurations generate console
+     output on UART0 (J3).
+
+  3. Unless otherwise stated, the configurations are setup for
+     Linux (or any other POSIX environment like Cygwin under Windows):
+
+     Build Setup:
+       CONFIG_HOST_LINUX=y   : Linux or other POSIX environment
+
+  4. All of these configurations use the Code Sourcery for Windows toolchain
+     (unless stated otherwise in the description of the configuration).  That
+     toolchain selection can easily be reconfigured using 'make menuconfig'.
+     Here are the relevant current settings:
+
+     Build Setup:
+       CONFIG_HOST_WINDOS=y                : Microsoft Windows
+       CONFIG_WINDOWS_CYGWIN=y             : Using Cygwin or other POSIX environment
+
+     System Type -> Toolchain:
+       CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW=y : GNU EABI toolchain for windows
+
+     That same configuration will work with Atmel GCC toolchain.  The only
+     change required to use the Atmel GCC toolchain is to change the PATH
+     variable so that those tools are selected instead of the CodeSourcery
+     tools.  Try 'which arm-none-eabi-gcc' to make sure that you are
+     selecting the right tool.
+
+     The setenv.sh file is available for you to use to set the PATH
+     variable.  The path in the that file may not, however, be correct
+     for your installation.
+
+     See also the "NOTE about Windows native toolchains" in the section call
+     "GNU Toolchain Options" above.
+
+  Configuration sub-directories
+  -----------------------------
+
+  ostest:
+    This configuration directory, performs a simple OS test using
+    examples/ostest.
diff --git a/nuttx/configs/sama5d3x-ek/include/board.h b/nuttx/configs/sama5d3x-ek/include/board.h
new file mode 100644
index 000000000..7a5119376
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/include/board.h
@@ -0,0 +1,157 @@
+/************************************************************************************
+ * configs/sama5df3x-ek/include/board.h
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_SAMA5D3X_EK_INCLUDE_BOARD_H
+#define __CONFIGS_SAMA5D3X_EK_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* LED definitions ******************************************************************/
+
+#define LED_STARTED       0
+#define LED_HEAPALLOCATE  1
+#define LED_IRQSENABLED   2
+#define LED_STACKCREATED  3
+#define LED_INIRQ         4
+#define LED_SIGNAL        5
+#define LED_ASSERTION     6
+#define LED_PANIC         7
+
+/* Button definitions ***************************************************************/
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: sam_boardinitialize
+ *
+ * Description:
+ *   All SAMA5 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void sam_boardinitialize(void);
+
+/************************************************************************************
+ * Name:  sam_ledinit, sam_setled, and sam_setleds
+ *
+ * Description:
+ *   If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs.  If
+ *   CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
+ *   control the LEDs from user applications.
+ *
+ ************************************************************************************/
+
+#ifndef CONFIG_ARCH_LEDS
+void sam_ledinit(void);
+void sam_setled(int led, bool ledon);
+void sam_setleds(uint8_t ledset);
+#endif
+
+/************************************************************************************
+ * Name: up_buttoninit
+ *
+ * Description:
+ *   up_buttoninit() must be called to initialize button resources.  After that,
+ *   up_buttons() may be called to collect the current state of all buttons or
+ *   up_irqbutton() may be called to register button interrupt handlers.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_BUTTONS
+void up_buttoninit(void);
+
+/************************************************************************************
+ * Name: up_buttons
+ *
+ * Description:
+ *   After up_buttoninit() has been called, up_buttons() may be called to collect
+ *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
+ *   associated with a button.  See the BUTTON* definitions above for the meaning of
+ *   each bit in the returned value.
+ *
+ ************************************************************************************/
+
+uint8_t up_buttons(void);
+
+/************************************************************************************
+ * Name: up_irqbutton
+ *
+ * Description:
+ *   This function may be called to register an interrupt handler that will be
+ *   called when a button is depressed or released.  The ID value is one of the
+ *   BUTTON* definitions provided above. The previous interrupt handler address is
+ *   returned (so that it may restored, if so desired).
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIOA_IRQ
+xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
+#endif
+#endif /* CONFIG_ARCH_BUTTONS */
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __CONFIGS_SAMA5D3X_EK_INCLUDE_BOARD_H */
diff --git a/nuttx/configs/sama5d3x-ek/ostest/Make.defs b/nuttx/configs/sama5d3x-ek/ostest/Make.defs
new file mode 100644
index 000000000..371dd5bc5
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/ostest/Make.defs
@@ -0,0 +1,119 @@
+############################################################################
+# configs/sama5d3x-ek/ostest/Make.defs
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
+  ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+ifeq ($(CONFIG_HOST_WINDOWS),y)
+  HOSTEXEEXT = .exe
+else
+  HOSTEXEEXT =
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native host tools
+  DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
+  DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
+else
+  # Linux/Cygwin-native host tools 
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
+endif
+
diff --git a/nuttx/configs/sama5d3x-ek/ostest/defconfig b/nuttx/configs/sama5d3x-ek/ostest/defconfig
new file mode 100644
index 000000000..8b72ad684
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/ostest/defconfig
@@ -0,0 +1,609 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+CONFIG_ARCH_CHIP_SAMA5=y
+# CONFIG_ARCH_CHIP_SAM34 is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM4 is not set
+CONFIG_ARCH_CORTEXA5=y
+CONFIG_ARCH_FAMILY="armv7-a"
+CONFIG_ARCH_CHIP="sama5"
+CONFIG_ARCH_HAVE_FPU=y
+CONFIG_ARCH_FPU=y
+# CONFIG_ARCH_HAVE_MPU is not set
+CONFIG_PGTABLE_VADDR=0x20000000
+# CONFIG_ARCH_ROMPGTABLE is not set
+# CONFIG_PAGING is not set
+
+#
+# ARMv7-A Configuration Options
+#
+# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
+CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
+
+#
+# ATSAMA5 Configuration Options
+#
+# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
+CONFIG_ARCH_CHIP_ATSAMA5D33=y
+# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
+# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
+
+#
+# ATSAMA5 Peripheral Support
+#
+# CONFIG_SAMA5_DBGU is not set
+# CONFIG_SAMA5_PIT is not set
+# CONFIG_SAMA5_WDT is not set
+# CONFIG_SAMA5_HSMC is not set
+# CONFIG_SAMA5_SMD is not set
+CONFIG_SAMA5_UART0=y
+# CONFIG_SAMA5_UART1 is not set
+# CONFIG_SAMA5_USART0 is not set
+# CONFIG_SAMA5_USART1 is not set
+# CONFIG_SAMA5_USART2 is not set
+# CONFIG_SAMA5_USART3 is not set
+# CONFIG_SAMA5_TWI0 is not set
+# CONFIG_SAMA5_TWI1 is not set
+# CONFIG_SAMA5_TWI2 is not set
+# CONFIG_SAMA5_HSMCI0 is not set
+# CONFIG_SAMA5_HSMCI1 is not set
+# CONFIG_SAMA5_HSMCI2 is not set
+# CONFIG_SAMA5_SPI0 is not set
+# CONFIG_SAMA5_SPI1 is not set
+# CONFIG_SAMA5_TC0 is not set
+# CONFIG_SAMA5_TC1 is not set
+# CONFIG_SAMA5_PWM is not set
+# CONFIG_SAMA5_ADC is not set
+# CONFIG_SAMA5_DMAC0 is not set
+# CONFIG_SAMA5_DMAC1 is not set
+# CONFIG_SAMA5_UHPHS is not set
+# CONFIG_SAMA5_UDPHS is not set
+# CONFIG_SAMA5_GMAC is not set
+# CONFIG_SAMA5_EMAC is not set
+# CONFIG_SAMA5_LCDC is not set
+# CONFIG_SAMA5_ISI is not set
+# CONFIG_SAMA5_SSC0 is not set
+# CONFIG_SAMA5_SSC1 is not set
+# CONFIG_SAMA5_CAN0 is not set
+# CONFIG_SAMA5_CAN1 is not set
+# CONFIG_SAMA5_SHA is not set
+# CONFIG_SAMA5_AES is not set
+# CONFIG_SAMA5_TDES is not set
+# CONFIG_SAMA5_TRNG is not set
+# CONFIG_SAMA5_ARM is not set
+# CONFIG_SAMA5_FUSE is not set
+# CONFIG_SAMA5_MPDDRC is not set
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_HAVE_MMU=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+# CONFIG_ARCH_HAVE_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_VSTART=0x20000000
+CONFIG_DRAM_SIZE=131072
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+# CONFIG_BOOT_RUNFROMFLASH is not set
+CONFIG_BOOT_RUNFROMISRAM=y
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_SAMA5D3X_EK=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="sama5d3x-ek"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2009
+CONFIG_START_MONTH=9
+CONFIG_START_DAY=21
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+CONFIG_DISABLE_ENVIRON=y
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
+CONFIG_MCU_SERIAL=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# UART0 Configuration
+#
+CONFIG_UART0_RXBUFSIZE=128
+CONFIG_UART0_TXBUFSIZE=128
+CONFIG_UART0_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
+# CONFIG_UART0_IFLOWCONTROL is not set
+# CONFIG_UART0_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_FS_RAMMAP is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/sama5d3x-ek/ostest/setenv.sh b/nuttx/configs/sama5d3x-ek/ostest/setenv.sh
new file mode 100755
index 000000000..f079990eb
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/ostest/setenv.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+# configs/samard3x-ek/ostest/setenv.sh
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the Atmel GCC
+# toolchain under Windows.  You will also have to edit this if you install
+# this toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/sama5d3x-ek/src/Makefile b/nuttx/configs/sama5d3x-ek/src/Makefile
new file mode 100644
index 000000000..80d8f4719
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/src/Makefile
@@ -0,0 +1,100 @@
+############################################################################
+# configs/sam4s-xplained/src/Makefile
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS += -I$(TOPDIR)/sched
+
+ASRCS =
+AOBJS = $(ASRCS:.S=$(OBJEXT))
+
+CSRCS = sam_boot.c
+
+ifeq ($(CONFIG_HAVE_CXX),y)
+CSRCS += sam_cxxinitialize.c
+endif
+
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS += sam_autoleds.c
+else
+CSRCS += sam_userleds.c
+endif
+
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS += sam_buttons.c
+endif
+
+COBJS = $(CSRCS:.c=$(OBJEXT))
+
+SRCS = $(ASRCS) $(CSRCS)
+OBJS = $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}"
+  CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/common}"
+  CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS += -I$(ARCH_SRCDIR)/chip
+  CFLAGS += -I$(ARCH_SRCDIR)/common
+  CFLAGS += -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	$(Q) touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/nuttx/configs/sama5d3x-ek/src/sam_boot.c b/nuttx/configs/sama5d3x-ek/src/sam_boot.c
new file mode 100644
index 000000000..fd21a6564
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/src/sam_boot.c
@@ -0,0 +1,75 @@
+/************************************************************************************
+ * configs/sama5d3x-ek/src/sam_boot.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include "sama5d3x-ek.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: sam_boardinitialize
+ *
+ * Description:
+ *   All SAMA5 architectures must provide the following entry point.  This entry
+ *   point is called early in the intitialization -- after all memory has been
+ *   configured and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void sam_boardinitialize(void)
+{
+#ifdef CONFIG_ARCH_LEDS
+  /* Configure on-board LEDs if LED support has been selected. */
+
+  up_ledinit();
+#endif
+}
diff --git a/nuttx/configs/sama5d3x-ek/src/sama5d3-ek.h b/nuttx/configs/sama5d3x-ek/src/sama5d3-ek.h
new file mode 100644
index 000000000..eacc7a873
--- /dev/null
+++ b/nuttx/configs/sama5d3x-ek/src/sama5d3-ek.h
@@ -0,0 +1,81 @@
+/************************************************************************************
+ * configs/sama5d3x-ek/src/sama5d3x-ek.h
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_SAMA5D3X_EK_SRC_SAMA5D3X_EK_H
+#define __CONFIGS_SAMA5D3X_EK_SRC_SAMA5D3X_EK_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+#include <stdint.h>
+
+#include <arch/irq.h>
+#include <nuttx/irq.h>
+
+#include "chip/sam_pinmap.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: up_ledinit
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+void up_ledinit(void);
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_SAMA5D3X_EK_SRC_SAMA5D3X_EK_H */
+