Add support for the STM3220G-EVAL board

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4472 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 168 insertions, 0 deletions

diff --git a/nuttx/configs/stm3220g-eval/src/up_adc.c b/nuttx/configs/stm3220g-eval/src/up_adc.c
new file mode 100644
index 000000000..c1563c4bc
--- /dev/null
+++ b/nuttx/configs/stm3220g-eval/src/up_adc.c
@@ -0,0 +1,168 @@
+/************************************************************************************
+ * configs/stm3220g-eval/src/up_adc.c
+ * arch/arm/src/board/up_adc.c
+ *
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/analog/adc.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+
+#include "stm32_pwm.h"
+#include "stm3220g-internal.h"
+
+#ifdef CONFIG_ADC
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Configuration ************************************************************/
+/* Up to 3 ADC interfaces are supported */
+
+#if STM32_NADC < 3
+#  undef CONFIG_STM32_ADC3
+#endif
+
+#if STM32_NADC < 2
+#  undef CONFIG_STM32_ADC2
+#endif
+
+#if STM32_NADC < 1
+#  undef CONFIG_STM32_ADC1
+#endif
+
+#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3)
+#ifndef CONFIG_STM32_ADC3
+#  warning "Channel information only available for ADC3"
+#endif
+
+/* The number of ADC channels in the conversion list */
+
+#define ADC3_NCHANNELS 1
+
+/************************************************************************************
+ * Private Data
+ ************************************************************************************/
+/* The STM3220G-EVAL has a 10 Kohm potentiometer RV1 connected to PF9 of
+ * STM32F207IGH6 on the board: TIM14_CH1/FSMC_CD/ADC3_IN7
+ */
+
+/* Identifying number of each ADC channel: Variable Resistor. */
+
+#ifdef CONFIG_STM32_ADC3
+static const uint8_t  g_chanlist[ADC3_NCHANNELS] = {7};
+
+/* Configurations of pins used byte each ADC channels */
+
+static const uint32_t g_pinlist[ADC3_NCHANNELS]  = {GPIO_ADC3_IN7};
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: adc_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/adc.
+ *
+ ************************************************************************************/
+
+int adc_devinit(void)
+{
+#ifdef CONFIG_STM32_ADC3
+  static bool initialized = false;
+  struct adc_dev_s *adc;
+  int ret;
+  int i;
+
+  /* Check if we have already initialized */
+
+  if (!initialized)
+    {
+      /* Configure the pins as analog inputs for the selected channels */
+
+      for (i = 0; i < ADC3_NCHANNELS; i++)
+        {
+          stm32_configgpio(g_pinlist[i]);
+        }
+
+      /* Call stm32_adcinitialize() to get an instance of the ADC interface */
+
+      adc = stm32_adcinitialize(3, g_chanlist, ADC3_NCHANNELS);
+      if (adc == NULL)
+        {
+          adbg("ERROR: Failed to get ADC interface\n");
+          return -ENODEV;
+        }
+
+      /* Register the ADC driver at "/dev/adc0" */
+
+      ret = adc_register("/dev/adc0", adc);
+      if (ret < 0)
+        {
+          adbg("adc_register failed: %d\n", ret);
+          return ret;
+        }
+
+      /* Now we are initialized */
+
+      initialized = true;
+    }
+
+  return OK;
+#else
+  return -ENOSYS;
+#endif
+}
+
+#endif /* CONFIG_STM32_ADC1 || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */
+#endif /* CONFIG_ADC */
\ No newline at end of file