diff options
| author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-12-09 17:03:16 +0000 |
|---|---|---|
| committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-12-09 17:03:16 +0000 |
| commit | 88f3c3ba8d3161537032f2390936047c0535dce9 (patch) | |
| tree | d13d6f30d8434fcb973fe397ebe500632dd7e314 /nuttx/configs/stm3240g-eval/README.txt | |
| parent | 1a79f640a822bd01d8ef8149c5f0d3e793d65b88 (diff) | |
| download | px4-nuttx-88f3c3ba8d3161537032f2390936047c0535dce9.tar.gz px4-nuttx-88f3c3ba8d3161537032f2390936047c0535dce9.tar.bz2 px4-nuttx-88f3c3ba8d3161537032f2390936047c0535dce9.zip | |
Add PHY setup for STM3240G-EVAL Ethernet driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4151 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/stm3240g-eval/README.txt')
| -rwxr-xr-x | nuttx/configs/stm3240g-eval/README.txt | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/nuttx/configs/stm3240g-eval/README.txt b/nuttx/configs/stm3240g-eval/README.txt index 2cd5339e4..25ee3ce34 100755 --- a/nuttx/configs/stm3240g-eval/README.txt +++ b/nuttx/configs/stm3240g-eval/README.txt @@ -374,10 +374,29 @@ STM3240G-EVAL-specific Configuration Options CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default: 4-bit transfer mode. + CONFIG_STM32_PHYADDR - The 5-bit address of the PHY on the board CONFIG_STM32_MII - Support Ethernet MII interface CONFIG_STM32_MII_MCO1 - Use MCO1 to clock the MII interface CONFIG_STM32_MII_MCO2 - Use MCO2 to clock the MII interface CONFIG_STM32_RMII - Support Ethernet RMII interface + CONFIG_STM32_AUTONEG - Use PHY autonegotion to determine speed and mode + CONFIG_STM32_ETHFD - If CONFIG_STM32_AUTONEG is not defined, then this + may be defined to select full duplex mode. Default: half-duplex + CONFIG_STM32_ETH100MBPS - If CONFIG_STM32_AUTONEG is not defined, then this + may be defined to select 100 MBps speed. Default: 10 Mbps + CONFIG_STM32_PHYSR - This must be provided if CONFIG_STM32_AUTONEG is + defined. The PHY status register address may diff from PHY to PHY. This + configuration sets the address of the PHY status register. + CONFIG_STM32_PHYSR_SPEED - This must be provided if CONFIG_STM32_AUTONEG is + defined. This provides bit mask indicating 10 or 100MBps speed. + CONFIG_STM32_PHYSR_100MBPS - This must be provided if CONFIG_STM32_AUTONEG is + defined. This provides the value of the speed bit(s) indicating 100MBps speed. + CONFIG_STM32_PHYSR_MODE - This must be provided if CONFIG_STM32_AUTONEG is + defined. This provide bit mask indicating full or half duplex modes. + CONFIG_STM32_PHYSR_FULLDUPLEX - This must be provided if CONFIG_STM32_AUTONEG is + defined. This provides the value of the mode bits indicating full duplex mode. + CONFIG_STM32_ETH_PTP - Precision Time Protocol (PTP). Not supported + but some hooks are indicated with this condition. STM3240G-EVAL LCD Hardware Configuration |