Massive name change USB STRG -> USB MSC

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4334 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 42 insertions, 42 deletions

diff --git a/nuttx/configs/sure-pic32mx/ostest/defconfig b/nuttx/configs/sure-pic32mx/ostest/defconfig
index 0f9a6335c..3e9682100 100644
--- a/nuttx/configs/sure-pic32mx/ostest/defconfig
+++ b/nuttx/configs/sure-pic32mx/ostest/defconfig
@@ -650,40 +650,40 @@ CONFIG_USBSER_TXBUFSIZE=512
 #
 # USB Storage Device Configuration
 #
-# CONFIG_USBSTRG
+# CONFIG_USBMSC
 #   Enable compilation of the USB storage driver
-# CONFIG_USBSTRG_EP0MAXPACKET
+# CONFIG_USBMSC_EP0MAXPACKET
 #   Max packet size for endpoint 0
-# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN
 #   The logical 7-bit address of a hardware endpoints that support
 #   bulk OUT and IN operations
-# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS
 #   The number of write/read requests that can be in flight
-# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN
 #   The size of the buffer in each write/read request.  This
 #   value needs to be at least as large as the endpoint
 #   maxpacket and ideally as large as a block device sector.
-# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR
 #   The vendor ID code/string
-# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR
 #   The product ID code/string
-# CONFIG_USBSTRG_REMOVABLE
+# CONFIG_USBMSC_REMOVABLE
 #   Select if the media is removable
 #
-CONFIG_USBSTRG=n
-CONFIG_USBSTRG_EP0MAXPACKET=64
-CONFIG_USBSTRG_EPBULKOUT=2
-CONFIG_USBSTRG_EPBULKIN=5
-CONFIG_USBSTRG_NRDREQS=2
-CONFIG_USBSTRG_NWRREQS=2
-CONFIG_USBSTRG_BULKINREQLEN=256
-CONFIG_USBSTRG_BULKOUTREQLEN=256
-CONFIG_USBSTRG_VENDORID=0x584e
-CONFIG_USBSTRG_VENDORSTR="NuttX"
-CONFIG_USBSTRG_PRODUCTID=0x5342
-CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
-CONFIG_USBSTRG_VERSIONNO=0x0399
-CONFIG_USBSTRG_REMOVABLE=y
+CONFIG_USBMSC=n
+CONFIG_USBMSC_EP0MAXPACKET=64
+CONFIG_USBMSC_EPBULKOUT=2
+CONFIG_USBMSC_EPBULKIN=5
+CONFIG_USBMSC_NRDREQS=2
+CONFIG_USBMSC_NWRREQS=2
+CONFIG_USBMSC_BULKINREQLEN=256
+CONFIG_USBMSC_BULKOUTREQLEN=256
+CONFIG_USBMSC_VENDORID=0x584e
+CONFIG_USBMSC_VENDORSTR="NuttX"
+CONFIG_USBMSC_PRODUCTID=0x5342
+CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
+CONFIG_USBMSC_VERSIONNO=0x0399
+CONFIG_USBMSC_REMOVABLE=y
 
 #
 # Settings for examples/uip
@@ -817,46 +817,46 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
 #
 # Settings for examples/usbstorage
 #
-# CONFIG_EXAMPLES_USBSTRG_NLUNS
+# CONFIG_EXAMPLES_USBMSC_NLUNS
 #    Defines the number of logical units (LUNs) exported by the USB storage
 #    driver.  Each LUN corresponds to one exported block driver (or partition
 #    of a block driver).  May be 1, 2, or 3.  Default is 1.
-# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
+# CONFIG_EXAMPLES_USBMSC_DEVMINOR1
 #    The minor device number of the block driver for the first LUN. For
 #    example, N in /dev/mmcsdN.  Used for registering the block driver. Default
 #    is zero.
-# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
+# CONFIG_EXAMPLES_USBMSC_DEVPATH1
 #    The full path to the registered block driver.  Default is "/dev/mmcsd0"
-#  CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
-#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+#  CONFIG_EXAMPLES_USBMSC_DEVMINOR2 and CONFIG_EXAMPLES_USBMSC_DEVPATH2
+#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS
 #    is 2 or 3.  No defaults.
-#  CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
-#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+#  CONFIG_EXAMPLES_USBMSC_DEVMINOR3 and CONFIG_EXAMPLES_USBMSC_DEVPATH3
+#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS
 #    is 3.  No defaults.
 #
 #  If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
 #  the example code will also manage the USB trace output.  The amount of trace output
 #  can be controlled using:
 #
-#  CONFIG_EXAMPLES_USBSTRG_TRACEINIT
+#  CONFIG_EXAMPLES_USBMSC_TRACEINIT
 #    Show initialization events
-#  CONFIG_EXAMPLES_USBSTRG_TRACECLASS
+#  CONFIG_EXAMPLES_USBMSC_TRACECLASS
 #    Show class driver events
-#  CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
+#  CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS
 #    Show data transfer events
-#  CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
+#  CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER
 #    Show controller events
-#  CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
+#  CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS
 #    Show interrupt-related events.
 #
-CONFIG_EXAMPLES_USBSTRG_NLUNS=1
-CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
-CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
-CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
-CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
-CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
+CONFIG_EXAMPLES_USBMSC_NLUNS=1
+CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0
+CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBMSC_TRACEINIT=n
+CONFIG_EXAMPLES_USBMSC_TRACECLASS=n
+CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n
 
 #
 # Stack and heap information