diff options
| author | Gregory Nutt <gnutt@nuttx.org> | 2014-09-09 08:14:44 -0600 |
|---|---|---|
| committer | Gregory Nutt <gnutt@nuttx.org> | 2014-09-09 08:14:44 -0600 |
| commit | f5678c8775b14d231c72dae86d2c3ec8c7fdee85 (patch) | |
| tree | 32d65fa0feab4c6e9c68751efc04ea838baf572d /nuttx/configs | |
| parent | 493da8dbd85082e0f4c4f5850fee41e8a572aef0 (diff) | |
| download | px4-nuttx-f5678c8775b14d231c72dae86d2c3ec8c7fdee85.tar.gz px4-nuttx-f5678c8775b14d231c72dae86d2c3ec8c7fdee85.tar.bz2 px4-nuttx-f5678c8775b14d231c72dae86d2c3ec8c7fdee85.zip | |
Add README.txt file for CC3200 Launchpad
Diffstat (limited to 'nuttx/configs')
| -rwxr-xr-x | nuttx/configs/cc3200-launchpad/README.txt | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/nuttx/configs/cc3200-launchpad/README.txt b/nuttx/configs/cc3200-launchpad/README.txt new file mode 100755 index 000000000..c6f6f595f --- /dev/null +++ b/nuttx/configs/cc3200-launchpad/README.txt @@ -0,0 +1,123 @@ +README
+======
+
+ This is the README file for the port of NuttX to the TI CC3200 Launchpad.
+
+OpenOCD for Windows
+===================
+
+ Get the CC3200 SDK
+ ------------------
+ Get this from the TI web site. Also get "CC3200 SimpleLink™ Wi-Fi® and
+ IoT Solution With MCU LaunchPad™ Getting Started Guide" (SWRU376A)
+
+ Get OpenOCD
+ ------------
+ The OpenOCD project is here: http://openocd.sourceforge.net/
+
+ I use the pre-built binaries provided by Freddie Chopin that can b
+ downloaded here: http://www.freddiechopin.info/
+
+ I used version 0.8.0 which available here:
+ http://www.freddiechopin.info/en/articles/34-news/92-openocd-w-wersji-080
+
+ Other versions are available here:
+ http://www.freddiechopin.info/en/download/category/4-openocd
+
+ Get Zadig
+ ---------
+ Unless you are very clever with Windows drivers, then I also recommend
+ that you download and install Zadig: http://zadig.akeo.ie/
+
+ Other Stuff
+ -----------
+ USB Cable, your favorite serial terminal program, NuttX build with
+ one of the CC3200 configurations in this diretory.
+
+ Installing
+ ----------
+ Install the TI CC3200 SDK and OpenOCD. Zadig is just an binary so there
+ is no installation. Plug in the CC3200 via the USB cable. You should see
+ two new devices in the Windows Device Manager, both called:
+
+ USB <-> JTAG/SWD
+
+ There will be indications on the driver icon that no driver is installed.
+
+ Follow the instructions in the paragraph "Install USB Driver" to install
+ the TI USB drivers. You need to do this twice, once for each device. Now
+ you will have two devices with different names:
+
+ CC3200CP JTAG Port A, and
+ CC3200CP UART Port B
+
+ OpenOCD cannot use the TI JTAG drivers. So we need to replace that port
+ (ONLY) with the libusb driver. Use Zadig to install the libusb driver
+ replacing the TI driver for "CC3200CP JTAG Port A". Now you should have
+ the following under "Ports (COM & LPT)":
+
+ CC3200 UART Port B
+
+ And under "Universal Serial Bus Devices", again:
+
+ USB <-> JTAG/SWD
+
+ But this time without the indication that a driver is needed.
+
+ Starting OpenOCD
+ ----------------
+ These instructions assume that (1) you are using a terminal with a Bash
+ shell under Cygwin, (2) that you installed OpenOCD at C:\openocd-0.8.0,
+ and (3) you are using a 64-bit windows version. You will need to make
+ minor changes if any of these are not true.
+
+ The script to use with OpenOCD 0.8.0 is provided in
+ nuttx/configs/cc3200-launchpad/tools. Go there and start OpenOCd as
+ follow:
+
+ $ cd configs/cc3200-launchpad/tools
+ $ /cygdrive/c/openocd-0.8.0/bin-x64/openocd-x64-0.8.0.exe --file cc3200.cfg
+
+ And you should see something like:
+
+ Open On-Chip Debugger 0.8.0 (2014-04-28-08:42)
+ Licensed under GNU GPL v2
+ For bug reports, read
+ http://openocd.sourceforge.net/doc/doxygen/bugs.html
+ Info : only one transport option; autoselect 'jtag'
+ adapter speed: 1000 kHz
+ Info : clock speed 1000 kHz
+ Info : JTAG tap: cc3200.jrc tap/device found: 0x0b97c02f (mfg: 0x017, part: 0xb97c, ver: 0x0)
+ Info : JTAG tap: cc3200.dap enabled
+ Info : cc3200.cpu: hardware has 6 breakpoints, 4 watchpoints
+
+ Open the Serial Terminal
+ ------------------------
+ Connect the CC3200 board via the USB cabale. Open the serial terminal
+ program using the libusb COM device. For me this is usually COM6 but
+ could be anything. If you are unsure, remove the CC3200 and see which
+ one goes away.
+
+ The serial interface should be configured 115200 8N1.
+
+ Using GDB
+ ---------
+ Start GDB and connect to OpenOCD:
+
+ $ arm-none-eabi-gdb
+ (gdb) target remote localhost:3333
+
+ Load and start the NuttX ELF file (nuttx):
+
+ (gdb) mon reset halt
+ (gdb) load nuttx
+ (gdb) cont
+ (gdb)
+
+ After entering cont(inue), you should see the NSH prompt in the serial
+ terminal window:
+
+ C3200 init
+
+ NuttShell (NSH)
+ nsh>
|