Add ATMega128 configuration

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3695 42af7a65-404d-4744-a932-0658087f49c3

18 files changed, 1772 insertions, 48 deletions

diff --git a/nuttx/arch/avr/src/at90usb/at90usb_lowconsole.c b/nuttx/arch/avr/src/at90usb/at90usb_lowconsole.c
index 648f193df..eb93dc5e2 100644
--- a/nuttx/arch/avr/src/at90usb/at90usb_lowconsole.c
+++ b/nuttx/arch/avr/src/at90usb/at90usb_lowconsole.c
@@ -144,13 +144,19 @@
 #ifdef HAVE_USART_DEVICE
 void usart1_reset(void)
 {
+  /* Clear USART configuration */
+
   UCSR1A = 0;
   UCSR1B = 0;
   UCSR1C = 0;
 
-  DDRD  &= ~(1 << 3);  
+  /* Unconfigure pins */
+
+  DDRD  &= ~(1 << 3);
   PORTD &= ~(1 << 2);
-        
+
+  /* Unconfigure BAUD divisor */
+  
   UBRR1  = 0;
 }
 #endif
@@ -214,10 +220,20 @@ void usart1_configure(void)
   UCSR1B = ucsr1b;
   UCSR1C = ucsr1c;
 
-  /* Configure pin */
-
-  DDRD  |= (1 << 3);  
-  PORTD |= (1 << 2);
+  /* Pin Configuration: None necessary, Port D bits 2&3 are automatically
+   * configured:
+   *
+   *   Port D, Bit 2: RXD1, Receive Data (Data input pin for the USART1). When
+   *     the USART1 receiver is enabled this pin is configured as an input
+   *     regardless of the value of DDD2. When the USART forces this pin to
+   *     be an input, the pull-up can still be controlled by the PORTD2 bit.
+   *   Port D, Bit 3: TXD1, Transmit Data (Data output pin for the USART1).
+   *     When the USART1 Transmitter is enabled, this pin is configured as
+   *     an output regardless of the value of DDD3.
+   */
+
+  DDRD  |= (1 << 3);   /* Force Port D pin 3 to be an output */
+  PORTD |= (1 << 2);   /* Set pull-up on port D pin 2 */
 
   /* Set the baud rate divisor */
 
diff --git a/nuttx/arch/avr/src/atmega/atmega_config.h b/nuttx/arch/avr/src/atmega/atmega_config.h
index 2cb483160..866680f0e 100644
--- a/nuttx/arch/avr/src/atmega/atmega_config.h
+++ b/nuttx/arch/avr/src/atmega/atmega_config.h
@@ -33,8 +33,8 @@
  *
  ************************************************************************************/
 
-#ifndef __ARCH_AVR_SRC_AT90USB_AT90USB_CONFIG_H
-#define __ARCH_AVR_SRC_AT90USB_AT90USB_CONFIG_H
+#ifndef __ARCH_AVR_SRC_ATMEGA_ATMEGA_CONFIG_H
+#define __ARCH_AVR_SRC_ATMEGA_ATMEGA_CONFIG_H
 
 /************************************************************************************
  * Included Files
@@ -80,5 +80,5 @@
  * Public Functions
  ************************************************************************************/
 
-#endif /* __ARCH_AVR_SRC_AT90USB_AT90USB_CONFIG_H */
+#endif /* __ARCH_AVR_SRC_ATMEGA_ATMEGA_CONFIG_H */
 
diff --git a/nuttx/arch/avr/src/atmega/atmega_exceptions.S b/nuttx/arch/avr/src/atmega/atmega_exceptions.S
index c4fea31da..0bba35cc3 100755
--- a/nuttx/arch/avr/src/atmega/atmega_exceptions.S
+++ b/nuttx/arch/avr/src/atmega/atmega_exceptions.S
@@ -49,7 +49,7 @@
 
 	.file	"atmega_exceptions.S"
 	.global	up_doirq
-	.gloal	up_fullcontextrestore
+	.global	up_fullcontextrestore
 
 /********************************************************************************************
  * Macros
diff --git a/nuttx/arch/avr/src/atmega/atmega_lowconsole.c b/nuttx/arch/avr/src/atmega/atmega_lowconsole.c
index b318dd608..e3277b98b 100644
--- a/nuttx/arch/avr/src/atmega/atmega_lowconsole.c
+++ b/nuttx/arch/avr/src/atmega/atmega_lowconsole.c
@@ -58,10 +58,10 @@
 /* USART0 Baud rate settings for normal and double speed settings  */
 
 #define AVR_NORMAL_UBRR0 \
-  ((((BOARD_CPU_CLOCK / 16) + (CONFIG_USART0_BAUD / 2)) / (CONFIG_USART0_BAUD)) - 1)
+  (((((BOARD_CPU_CLOCK / 16) + (CONFIG_USART0_BAUD / 2)) / (CONFIG_USART0_BAUD)) - 1)
 
 #define AVR_DBLSPEED_UBRR0 \
-  ((((BOARD_CPU_CLOCK / 8) + (CONFIG_USART0_BAUD / 2)) / (CONFIG_USART0_BAUD)) - 1)
+  (((((BOARD_CPU_CLOCK / 8) + (CONFIG_USART0_BAUD / 2)) / (CONFIG_USART0_BAUD)) - 1)
 
 /* Select normal or double speed baud settings.  This is a trade-off between the
  * sampling rate and the accuracy of the divisor for high baud rates.
@@ -111,10 +111,10 @@
 /* USART1 Baud rate settings for normal and double speed settings  */
 
 #define AVR_NORMAL_UBRR1 \
-  (((BOARD_CPU_CLOCK / 16) + (CONFIG_USART1_BAUD / 2)) / (CONFIG_USART1_BAUD)) - 1)
+  ((((BOARD_CPU_CLOCK / 16) + (CONFIG_USART1_BAUD / 2)) / (CONFIG_USART1_BAUD)) - 1)
 
 #define AVR_DBLSPEED_UBRR1 \
-  (((BOARD_CPU_CLOCK / 8) + (CONFIG_USART1_BAUD / 2)) / (CONFIG_USART1_BAUD)) - 1)
+  ((((BOARD_CPU_CLOCK / 8) + (CONFIG_USART1_BAUD / 2)) / (CONFIG_USART1_BAUD)) - 1)
 
 /* Select normal or double speed baud settings.  This is a trade-off between the
  * sampling rate and the accuracy of the divisor for high baud rates.
@@ -196,27 +196,42 @@
 #ifdef CONFIG_ATMEGA_USART0
 void usart0_reset(void)
 {
+  /* Clear USART configuration */
+
   UCSR0A = 0;
   UCSR0B = 0;
   UCSR0C = 0;
 
-# warning "Missing logic"
+  /* Unconfigure pins (no action needed */
+
+  DDRE  &= ~(1 << 1);
+  PORTE &= ~(1 << 0);
+
+  /* Unconfigure BAUD divisor */
 
-  UBRR0  = 0;
+  UBRR0H = 0;
+  UBRR0L = 0;
 }
 #endif
 
 #ifdef CONFIG_ATMEGA_USART1
 void usart1_reset(void)
 {
+  /* Clear USART configuration */
+
   UCSR1A = 0;
   UCSR1B = 0;
   UCSR1C = 0;
 
-  DDRD  &= ~(1 << 3);  
+  /* Unconfigure pins */
+
+  DDRD  &= ~(1 << 3);
   PORTD &= ~(1 << 2);
-        
-  UBRR1  = 0;
+
+  /* Unconfigure BAUD divisor */
+
+  UBRR1H = 0;
+  UBRR1L = 0;
 }
 #endif
 
@@ -279,13 +294,28 @@ void usart0_configure(void)
   UCSR0B = ucsr0b;
   UCSR0C = ucsr0c;
 
-  /* Configure pin */
-
-#warning "Missing logic"
+  /* Pin Configuration: None necessary, Port E bits 0&1 are automatically
+   * configured:
+   *
+   * Port E, Bit 0: RXD0, USART0 Receive Pin. Receive Data (Data input pin
+   *   for the USART0). When the USART0 receiver is enabled this pin is
+   *   configured as an input regardless of the value of DDRE0. When the
+   *   USART0 forces this pin to be an input, a logical one in PORTE0 will
+   *   turn on the internal pull-up.
+   *
+   * Port E, Bit 1: TXD0, UART0 Transmit pin.
+   *
+   * REVISIT: According to table 41, TXD0 is also automatically configured.
+   * However, this is not explicitly stated in the text.
+   */
+
+  DDRE  |= (1 << 1);   /* Force Port E pin 1 to be an input */
+  PORTE |= (1 << 0);   /* Set pull-up on Port E pin 0 */
 
   /* Set the baud rate divisor */
 
-  UBRR0  = AVR_UBRR0;
+  UBRR0H = AVR_UBRR1 >> 8;
+  UBRR0L = AVR_UBRR1 & 0xff;
 }
 #endif
 
@@ -340,14 +370,25 @@ void usart1_configure(void)
   UCSR1B = ucsr1b;
   UCSR1C = ucsr1c;
 
-  /* Configure pin */
-
-  DDRD  |= (1 << 3);  
-  PORTD |= (1 << 2);
+  /* Pin Configuration: None necessary, Port D bits 2&3 are automatically
+   * configured:
+   *
+   *   Port D, Bit 2: RXD1, Receive Data (Data input pin for the USART1). When
+   *     the USART1 receiver is enabled this pin is configured as an input
+   *     regardless of the value of DDD2. When the USART forces this pin to
+   *     be an input, the pull-up can still be controlled by the PORTD2 bit.
+   *   Port D, Bit 3: TXD1, Transmit Data (Data output pin for the USART1).
+   *     When the USART1 Transmitter is enabled, this pin is configured as
+   *     an output regardless of the value of DDD3.
+   */
+
+  DDRD  |= (1 << 3);   /* Force Port D pin 3 to be an output */
+  PORTD |= (1 << 2);   /* Set pull-up on port D pin 2 */
 
   /* Set the baud rate divisor */
 
-  UBRR1  = AVR_UBRR1;
+  UBRR1H = AVR_UBRR1 >> 8;
+  UBRR1L = AVR_UBRR1 & 0xff;
 }
 #endif
 
diff --git a/nuttx/arch/avr/src/atmega/atmega_timerisr.c b/nuttx/arch/avr/src/atmega/atmega_timerisr.c
index 402add3d3..d724bf6f8 100644
--- a/nuttx/arch/avr/src/atmega/atmega_timerisr.c
+++ b/nuttx/arch/avr/src/atmega/atmega_timerisr.c
@@ -177,5 +177,5 @@ void up_timerinit(void)
 
   /* Enable the interrupt on compare match A */
 
-  TIMSK1 |= (1 << OCIE1A);
+  TIMSK |= (1 << OCIE1A);
 }
diff --git a/nuttx/arch/avr/src/avr/up_irq.c b/nuttx/arch/avr/src/avr/up_irq.c
index 11beee8e5..1e0072427 100644
--- a/nuttx/arch/avr/src/avr/up_irq.c
+++ b/nuttx/arch/avr/src/avr/up_irq.c
@@ -38,7 +38,6 @@
  ****************************************************************************/
 
 #include <nuttx/config.h>
-#include "at90usb_config.h"
 
 #include <stdint.h>
 #include <errno.h>
diff --git a/nuttx/configs/amber/README.txt b/nuttx/configs/amber/README.txt
index 9de006872..1883ff2d9 100644
--- a/nuttx/configs/amber/README.txt
+++ b/nuttx/configs/amber/README.txt
@@ -26,6 +26,19 @@ Contents
 Amber Web Server Features
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 
+   o  17.56MHz ATmega128 Atmel 8bit AVR RISC Processor
+   o  128Kbyte Flash
+   o  64Kbyte RAM
+   o  10BaseT Ethernet Port
+   o  High Speed Serial Port
+   o  8Ch 10bit Analog Input port
+   o  16 Digital IO ports
+   o  Expansion bus for daughter cards
+   o  LED status indicators
+   o  ISP Programming port
+   o  7-14VDC input
+   o  Power via Ethernet port
+
 Toolchains
 ^^^^^^^^^^
 
@@ -189,6 +202,7 @@ Build Notes:
      cd avr-lib-1.7.1
 
   3. Configure avr-lib.  Assuming that WinAVR is installed at the following
+     loction:
 
      export PATH=/cygdrive/c/WinAVR/bin:$PATH
      ./configure --build=`./config.guess` --host=avr
@@ -287,32 +301,29 @@ Amber Web Server Configuration Options
 	   CONFIG_AVR_INT5=n
 	   CONFIG_AVR_INT6=n
 	   CONFIG_AVR_INT7=n
-	   CONFIG_AVR_USBHOST=n
-	   CONFIG_AVR_USBDEV=n
-	   CONFIG_AVR_WDT=n
 	   CONFIG_AVR_TIMER0=n
 	   CONFIG_AVR_TIMER1=n
 	   CONFIG_AVR_TIMER2=n
 	   CONFIG_AVR_TIMER3=n
 	   CONFIG_AVR_SPI=n
-	   CONFIG_AVR_UART0=y
-	   CONFIG_AVR_UART1=n
-	   CONFIG_AVR_ANACOMP=n
+	   CONFIG_AVR_USART0=y
+	   CONFIG_AVR_USART1=n
 	   CONFIG_AVR_ADC=n
+	   CONFIG_AVR_ANACOMP=n
 	   CONFIG_AVR_TWI=n
 
   ATMEGA specific device driver settings
 
-	CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
-	   console and ttys0 (default is the UART0).
-	CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+	CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
+	   console and ttys0 (default is the USART0).
+	CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
 	   This specific the size of the receive buffer
-	CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+	CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
 	   being sent.  This specific the size of the transmit buffer
-	CONFIG_UARTn_BAUD - The configure BAUD of the UART.  Must be
-	CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
-	CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
-	CONFIG_UARTn_2STOP - Two stop bits
+	CONFIG_USARTn_BAUD - The configure BAUD of the USART.  Must be
+	CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
+	CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+	CONFIG_USARTn_2STOP - Two stop bits
 
 Configurations
 ^^^^^^^^^^^^^^
diff --git a/nuttx/configs/amber/include/board.h b/nuttx/configs/amber/include/board.h
new file mode 100755
index 000000000..92b260037
--- /dev/null
+++ b/nuttx/configs/amber/include/board.h
@@ -0,0 +1,93 @@
+/****************************************************************************

+ * configs/amber/include/board.h

+ * include/arch/board/board.h

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ****************************************************************************/

+

+#ifndef __CONFIGS_AMBER_INCLUDE_BOARD_H

+#define __CONFIGS_AMBER_INCLUDE_BOARD_H

+

+/****************************************************************************

+ * Included Files

+ ****************************************************************************/

+

+#include <nuttx/config.h>

+

+/****************************************************************************

+ * Pre-Processor Definitions

+ ****************************************************************************/

+/* Configuration ************************************************************/

+

+/* Clocking *****************************************************************/

+

+#define BOARD_CPU_CLOCK        8000000 /* 8MHz */

+

+/* LED definitions **********************************************************/

+

+#define LED_STARTED            0

+#define LED_HEAPALLOCATE       1

+#define LED_IRQSENABLED        2

+#define LED_STACKCREATED       3

+#define LED_INIRQ              4

+#define LED_SIGNAL             5

+#define LED_ASSERTION          6

+#define LED_PANIC              7

+

+/****************************************************************************

+ * Public Types

+ ****************************************************************************/

+

+#ifndef __ASSEMBLY__

+

+/****************************************************************************

+ * Inline Functions

+ ****************************************************************************/

+

+/****************************************************************************

+ * Public Function Prototypes

+ ****************************************************************************/

+

+#ifdef __cplusplus

+#define EXTERN extern "C"

+extern "C" {

+#else

+#define EXTERN extern

+#endif

+

+#undef EXTERN

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* __ASSEMBLY__ */

+#endif /* __CONFIGS_AMBER_INCLUDE_BOARD_H */

diff --git a/nuttx/configs/amber/ostest/Make.defs b/nuttx/configs/amber/ostest/Make.defs
new file mode 100644
index 000000000..66902ca38
--- /dev/null
+++ b/nuttx/configs/amber/ostest/Make.defs
@@ -0,0 +1,149 @@
+############################################################################
+# configs/amber/ostest/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_AVR_WINAVR),y)
+  # WinAVR toolchain under Windows/Cygwin
+  CROSSDEV = avr-
+  WINTOOL = y
+  MAXOPTIMIZATION = -O2
+  ARCHCPUFLAGS = -mmcu=atmega128
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+ifeq ($(CONFIG_AVR_LINUXGCC),y)
+  # GCC toolchain under Linux
+  CROSSDEV = avr-
+  MAXOPTIMIZATION = -O2
+  ARCHCPUFLAGS = -mmcu=atmega128
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+ifeq ($(CONFIG_AVR_BUILDROOT),y)
+  # NuttX buildroot GCC toolchain under Linux or Cygwin
+  CROSSDEV = avr-elf-
+  MAXOPTIMIZATION = -O2
+  ARCHCPUFLAGS = -mmcu=atmega128
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/winlink.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = $(ARCHINCLUDES) -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem "$(TOPDIR)/include"
+  ARCHXXINCLUDES =  $(ARCHINCLUDES) -isystem "$(TOPDIR)/include/cxx"
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+	@echo "CXX: $1"
+	@$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/amber/ostest/appconfig b/nuttx/configs/amber/ostest/appconfig
new file mode 100644
index 000000000..cf4df4dc7
--- /dev/null
+++ b/nuttx/configs/amber/ostest/appconfig
@@ -0,0 +1,39 @@
+############################################################################
+# configs/amber/ostest/appconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS += examples/ostest
+
diff --git a/nuttx/configs/amber/ostest/defconfig b/nuttx/configs/amber/ostest/defconfig
new file mode 100644
index 000000000..3aa3883a5
--- /dev/null
+++ b/nuttx/configs/amber/ostest/defconfig
@@ -0,0 +1,820 @@
+############################################################################
+# configs/amber/ostest/defconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip family.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_NOINTC - define if the architecture does not
+#   support an interrupt controller or otherwise cannot support
+#   APIs like up_enable_irq() and up_disable_irq().
+# CONFIG_ARCH_IRQPRIO - The ATMega128 does not support interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=avr
+CONFIG_ARCH_AVR=y
+CONFIG_ARCH_ATMEGA=y
+CONFIG_ARCH_CHIP=atmega
+CONFIG_ARCH_CHIP_ATMEGA128=y
+CONFIG_ARCH_BOARD=amber
+CONFIG_ARCH_BOARD_AMBER=y
+CONFIG_BOARD_LOOPSPERMSEC=8079
+CONFIG_DRAM_SIZE=(4*1024)
+CONFIG_DRAM_START=0x800000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_NOINTC=y
+CONFIG_ARCH_IRQPRIO=n
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=n
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_AVR_WINAVR=n
+CONFIG_AVR_LINUXGCC=n
+CONFIG_AVR_BUILDROOT=y
+
+#
+#  Individual subsystems can be enabled:
+#
+CONFIG_AVR_INT0=n
+CONFIG_AVR_INT1=n
+CONFIG_AVR_INT2=n
+CONFIG_AVR_INT3=n
+CONFIG_AVR_INT4=n
+CONFIG_AVR_INT5=n
+CONFIG_AVR_INT6=n
+CONFIG_AVR_INT7=n
+CONFIG_AVR_TIMER0=n
+CONFIG_AVR_TIMER1=n
+CONFIG_AVR_TIMER2=n
+CONFIG_AVR_TIMER3=n
+CONFIG_AVR_SPI=n
+CONFIG_AVR_USART0=y
+CONFIG_AVR_USART1=n
+CONFIG_AVR_ADC=n
+CONFIG_AVR_ANACOMP=n
+CONFIG_AVR_TWI=n
+
+#
+# ATMega128 specific serial device driver settings
+#
+# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
+#   console and ttys0 (default is the USART1).
+# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_USARTn_BAUD - The configure BAUD of the USART.  Must be
+# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_USARTn_2STOP - Two stop bits
+#
+CONFIG_USART0_SERIAL_CONSOLE=y
+CONFIG_USART0_TXBUFSIZE=256
+CONFIG_USART0_RXBUFSIZE=256
+CONFIG_USART0_BAUD=115200
+CONFIG_USART0_BITS=8
+CONFIG_USART0_PARITY=0
+CONFIG_USART0_2STOP=0
+
+CONFIG_USART1_SERIAL_CONSOLE=n
+CONFIG_USART1_TXBUFSIZE=256
+CONFIG_USART1_RXBUFSIZE=256
+CONFIG_USART1_BAUD=115200
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
+#  handle delayed processing from interrupt handlers.  This feature
+#  is required for some drivers but, if there are not complaints,
+#  can be safely disabled.  The worker thread also performs
+#  garbage collection -- completing any delayed memory deallocations
+#  from interrupt handlers.  If the worker thread is disabled,
+#  then that clean will be performed by the IDLE thread instead
+#  (which runs at the lowest of priority and may not be appropriate
+#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
+#  is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+#  thread.  Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+#  work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+#  the worker thread.  Default: 4
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_DEBUG_SCHED=n
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=4
+CONFIG_START_DAY=8
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# Settings for nxflat
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+#  This format will support execution of NuttX binaries located
+#  in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals
+#  with.  CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and
+#  CONFIG_DEBUG_BINFMT have to be defined or
+#  CONFIG_NXFLAT_DUMPBUFFER does nothing.
+# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table
+#  is ordered by symbol name
+#
+CONFIG_NXFLAT=n
+CONFIG_NXFLAT_DUMPBUFFER=n
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+#   Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+#   Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+#   Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+#   Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+#   Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+#   SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+#   Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+#   SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+#   accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+#   Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+#   Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+#   Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+#   Will cause USB features to indicate that the device is
+#   self-powered
+# CONFIG_USBDEV_MAXPOWER
+#   Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+#   Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+#   Number of trace entries to remember
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_USBSER
+#   Enable compilation of the USB serial driver
+# CONFIG_USBSER_EPINTIN
+#   The logical 7-bit address of a hardware endpoint that supports
+#   interrupt IN operation
+# CONFIG_USBSER_EPBULKOUT
+#   The logical 7-bit address of a hardware endpoint that supports
+#   bulk OUT operation
+# CONFIG_USBSER_EPBULKIN
+#   The logical 7-bit address of a hardware endpoint that supports
+#   bulk IN operation
+# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
+#   The number of write/read requests that can be in flight
+# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
+#   The vendor ID code/string
+# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
+#   The product ID code/string
+# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
+#   Size of the serial receive/transmit buffers
+#
+CONFIG_USBSER=n
+CONFIG_USBSER_EPINTIN=1
+CONFIG_USBSER_EPBULKOUT=2
+CONFIG_USBSER_EPBULKIN=5
+CONFIG_USBSER_NWRREQS=4
+CONFIG_USBSER_NRDREQS=4
+CONFIG_USBSER_VENDORID=0x067b
+CONFIG_USBSER_PRODUCTID=0x2303
+CONFIG_USBSER_VENDORSTR="Nuttx"
+CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
+CONFIG_USBSER_RXBUFSIZE=512
+CONFIG_USBSER_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBSTRG
+#   Enable compilation of the USB storage driver
+# CONFIG_USBSTRG_EP0MAXPACKET
+#   Max packet size for endpoint 0
+# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+#   The logical 7-bit address of a hardware endpoints that support
+#   bulk OUT and IN operations
+# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+#   The number of write/read requests that can be in flight
+# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+#   The size of the buffer in each write/read request.  This
+#   value needs to be at least as large as the endpoint
+#   maxpacket and ideally as large as a block device sector.
+# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+#   The vendor ID code/string
+# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+#   The product ID code/string
+# CONFIG_USBSTRG_REMOVABLE
+#   Select if the media is removable
+#
+CONFIG_USBSTRG=n
+CONFIG_USBSTRG_EP0MAXPACKET=64
+CONFIG_USBSTRG_EPBULKOUT=2
+CONFIG_USBSTRG_EPBULKIN=5
+CONFIG_USBSTRG_NRDREQS=2
+CONFIG_USBSTRG_NWRREQS=2
+CONFIG_USBSTRG_BULKINREQLEN=256
+CONFIG_USBSTRG_BULKOUTREQLEN=256
+CONFIG_USBSTRG_VENDORID=0x584e
+CONFIG_USBSTRG_VENDORSTR="NuttX"
+CONFIG_USBSTRG_PRODUCTID=0x5342
+CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
+CONFIG_USBSTRG_VERSIONNO=0x0399
+CONFIG_USBSTRG_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+#
+# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act
+#   as either the client side or server side of the test
+# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the
+#   client side simply receives messages forever, allowing
+#   measurement of throughput
+# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has
+#   no MAC address; one will be assigned
+# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address
+# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address
+# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
+# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
+#   client side of the test (may be target or host)
+#
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=y
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_STACKSIZE=2048
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=1
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+#    Only verify IN (device-to-host) data transfers.  Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+#    Only verify OUT (host-to-device) data transfers.  Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+#    Send only small, single packet messages.  Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+#    Send only large, multi-packet messages.  Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/usbstorage
+#
+# CONFIG_EXAMPLES_USBSTRG_NLUNS
+#    Defines the number of logical units (LUNs) exported by the USB storage
+#    driver.  Each LUN corresponds to one exported block driver (or partition
+#    of a block driver).  May be 1, 2, or 3.  Default is 1.
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
+#    The minor device number of the block driver for the first LUN. For
+#    example, N in /dev/mmcsdN.  Used for registering the block driver. Default
+#    is zero.
+# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
+#    The full path to the registered block driver.  Default is "/dev/mmcsd0"
+#  CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
+#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+#    is 2 or 3.  No defaults.
+#  CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
+#    Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+#    is 3.  No defaults.
+#
+#  If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
+#  the example code will also manage the USB trace output.  The amount of trace output
+#  can be controlled using:
+#
+#  CONFIG_EXAMPLES_USBSTRG_TRACEINIT
+#    Show initialization events
+#  CONFIG_EXAMPLES_USBSTRG_TRACECLASS
+#    Show class driver events
+#  CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
+#    Show data transfer events
+#  CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
+#    Show controller events
+#  CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
+#    Show interrupt-related events.
+#
+CONFIG_EXAMPLES_USBSTRG_NLUNS=1
+CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
+CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
+CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
+CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the ATMega128 which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx/configs/amber/ostest/ld.script b/nuttx/configs/amber/ostest/ld.script
new file mode 100644
index 000000000..6ea2c6c65
--- /dev/null
+++ b/nuttx/configs/amber/ostest/ld.script
@@ -0,0 +1,202 @@
+/****************************************************************************
+ * configs/amber/ostest/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *	notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *	notice, this list of conditions and the following disclaimer in
+ *	the documentation and/or other materials provided with the
+ *	distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *	used to endorse or promote products derived from this software
+ *	without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+/* Memory Regions ***********************************************************/
+
+MEMORY
+{
+	flash    (rx) : ORIGIN = 0, LENGTH = 128K
+	sram   (rw!x) : ORIGIN = 0x800060, LENGTH = 0xffa0
+	eeprom (rw!x) : ORIGIN = 0x810000, LENGTH = 64K
+}
+
+OUTPUT_FORMAT("elf32-avr","elf32-avr","elf32-avr")
+OUTPUT_ARCH(avr:5)
+ENTRY(__start)
+
+SECTIONS
+{
+	/* Read-only sections, merged into text segment: */
+
+	.hash			: { *(.hash) }
+	.dynsym			: { *(.dynsym) }
+	.dynstr			: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+	.rel.init		: { *(.rel.init) }
+	.rela.init		: { *(.rela.init) }
+
+	.rel.text		:
+		{
+			*(.rel.text)
+			*(.rel.text.*)
+			*(.rel.gnu.linkonce.t*)
+		}
+
+	.rela.text		:
+		{
+			*(.rela.text)
+			*(.rela.text.*)
+			*(.rela.gnu.linkonce.t*)
+		}
+
+	.rel.fini		: { *(.rel.fini) }
+	.rela.fini		: { *(.rela.fini) }
+
+	.rel.rodata		:
+		{
+			*(.rel.rodata)
+			*(.rel.rodata.*)
+			*(.rel.gnu.linkonce.r*)
+		}
+
+	.rela.rodata	:
+		{
+			*(.rela.rodata)
+			*(.rela.rodata.*)
+			*(.rela.gnu.linkonce.r*)
+		}
+
+	.rel.data		:
+		{
+			*(.rel.data)
+			*(.rel.data.*)
+			*(.rel.gnu.linkonce.d*)
+		}
+
+	.rela.data		:
+		{
+			*(.rela.data)
+			*(.rela.data.*)
+			*(.rela.gnu.linkonce.d*)
+		}
+
+	.rel.ctors		: { *(.rel.ctors) }
+	.rela.ctors		: { *(.rela.ctors) }
+	.rel.dtors		: { *(.rel.dtors) }
+	.rela.dtors		: { *(.rela.dtors) }
+	.rel.got		: { *(.rel.got) }
+	.rela.got		: { *(.rela.got) }
+	.rel.bss		: { *(.rel.bss) }
+	.rela.bss		: { *(.rela.bss) }
+	.rel.plt		: { *(.rel.plt) }
+	.rela.plt		: { *(.rela.plt) }
+
+	.text			:
+	{
+		_stext = . ;
+		*(.vectors)
+		*(.init)
+		*(.handlers)
+		*(.text)
+		*(.text.*)
+		_etext = . ;
+	} > flash
+
+	_eronly = ABSOLUTE(.);		/* See below										*/
+
+	.data			:
+	{
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss			:
+	{
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Global data not cleared after reset.	*/
+
+	.noinit			:
+	{
+		_snoinit = ABSOLUTE(.);
+		*(.noinit*)
+		_enoinit = ABSOLUTE(.);
+	}	> sram
+
+	.eeprom			:
+	{
+		_seeprom = ABSOLUTE(.);
+		*(.eeprom*)
+		_eeeprom = ABSOLUTE(.);
+	}	> eeprom
+
+	/* Stabs debugging sections.	*/
+
+	.stab 0				: { *(.stab) }
+	.stabstr 0			: { *(.stabstr) }
+	.stab.excl 0		: { *(.stab.excl) }
+	.stab.exclstr 0		: { *(.stab.exclstr) }
+	.stab.index 0		: { *(.stab.index) }
+	.stab.indexstr 0	: { *(.stab.indexstr) }
+	.comment 0			: { *(.comment) }
+
+	/* DWARF debug sections.
+		 Symbols in the DWARF debugging sections are relative to the beginning
+		 of the section so we begin them at 0.	*/
+
+	/* DWARF 1 */
+
+	.debug 0			: { *(.debug) }
+	.line 0				: { *(.line) }
+
+	/* GNU DWARF 1 extensions */
+
+	.debug_srcinfo 0	: { *(.debug_srcinfo) }
+	.debug_sfnames 0	: { *(.debug_sfnames) }
+
+	/* DWARF 1.1 and DWARF 2 */
+
+	.debug_aranges 0 	: { *(.debug_aranges) }
+	.debug_pubnames 0	: { *(.debug_pubnames) }
+
+	/* DWARF 2 */
+
+	.debug_info 0		: { *(.debug_info) *(.gnu.linkonce.wi.*) }
+	.debug_abbrev 0		: { *(.debug_abbrev) }
+	.debug_line 0		: { *(.debug_line) }
+	.debug_frame 0		: { *(.debug_frame) }
+	.debug_str 0		: { *(.debug_str) }
+	.debug_loc 0		: { *(.debug_loc) }
+	.debug_macinfo 0	: { *(.debug_macinfo) }
+}
diff --git a/nuttx/configs/amber/ostest/setenv.sh b/nuttx/configs/amber/ostest/setenv.sh
new file mode 100755
index 000000000..18d6b4ab5
--- /dev/null
+++ b/nuttx/configs/amber/ostest/setenv.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# configs/amber/ostest/setenv.sh
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the WinAVR
+# toolchain under windows.  This is *not* the default install
+# location so you will probably have to edit this.  You will also have
+# to edit this if you install the Linux AVR toolchain as well
+#export TOOLCHAIN_BIN="/cygdrive/c/WinAVR/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_avr/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/amber/src/Makefile b/nuttx/configs/amber/src/Makefile
new file mode 100755
index 000000000..243759924
--- /dev/null
+++ b/nuttx/configs/amber/src/Makefile
@@ -0,0 +1,97 @@
+############################################################################
+# configs/amber/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+ASRCS		= 
+CSRCS		= up_boot.c
+
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS		+= up_leds.c
+endif
+
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(CONFIG_ARCH_AVR32),y)
+ARCH_SUBDIR	= avr32
+endif
+ifeq ($(CONFIG_ARCH_AVR),y)
+ARCH_SUBDIR	= avr
+endif
+
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(TOPDIR)/sched}"
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" 
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" 
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}"
+else
+  CFLAGS	+= -I "$(TOPDIR)/sched"
+  CFLAGS	+= -I "$(ARCH_SRCDIR)/chip"
+  CFLAGS	+= -I "$(ARCH_SRCDIR)/common" 
+  CFLAGS	+= -I "$(ARCH_SRCDIR)/$(ARCH_SUBDIR)"
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+.depend: Makefile $(SRCS)
+	@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@rm -f libboard$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/configs/amber/src/amber_internal.h b/nuttx/configs/amber/src/amber_internal.h
new file mode 100755
index 000000000..7f16e3d74
--- /dev/null
+++ b/nuttx/configs/amber/src/amber_internal.h
@@ -0,0 +1,101 @@
+/****************************************************************************

+ * configs/amber/src/pcblogic-internal.h

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ****************************************************************************/

+

+#ifndef __CONFIGS_AMBER_SRC_AMBER_INTERNAL_H

+#define __CONFIGS_AMBER_SRC_AMBER_INTERNAL_H

+

+/****************************************************************************

+ * Included Files

+ ****************************************************************************/

+

+#include <nuttx/config.h>

+

+/****************************************************************************

+ * Pre-Processor Definitions

+ ****************************************************************************/

+/* Configuration ************************************************************/

+

+/****************************************************************************

+ * Public Types

+ ****************************************************************************/

+

+#ifndef __ASSEMBLY__

+

+/****************************************************************************

+ * Inline Functions

+ ****************************************************************************/

+

+/****************************************************************************

+ * Public Function Prototypes

+ ****************************************************************************/

+

+#ifdef __cplusplus

+#define EXTERN extern "C"

+extern "C" {

+#else

+#define EXTERN extern

+#endif

+

+/************************************************************************************

+ * Name: atmega_spiinitialize

+ *

+ * Description:

+ *   Called to configure SPI chip select GPIO pins for the Amber Web Server.

+ *

+ ************************************************************************************/

+

+#if defined(CONFIG_AVR_SPI1) || defined(CONFIG_AVR_SPI2)

+EXTERN void weak_function atmega_spiinitialize(void);

+#endif

+

+/************************************************************************************

+ * Name: atmega_ledinit

+ *

+ * Description:

+ *   Configure on-board LEDs if LED support has been selected.

+ *

+ ************************************************************************************/

+

+#ifdef CONFIG_ARCH_LEDS

+EXTERN void atmega_ledinit(void);

+#endif

+

+#undef EXTERN

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* __ASSEMBLY__ */

+#endif /* __CONFIGS_AMBER_SRC_AMBER_INTERNAL_H */

diff --git a/nuttx/configs/amber/src/up_boot.c b/nuttx/configs/amber/src/up_boot.c
new file mode 100755
index 000000000..ba80f4b8b
--- /dev/null
+++ b/nuttx/configs/amber/src/up_boot.c
@@ -0,0 +1,93 @@
+/************************************************************************************
+ * configs/amber/src/up_boot.c
+ * arch/mips/src/board/up_boot.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "atmega_internal.h"
+#include "amber_internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: up_boardinitialize
+ *
+ * Description:
+ *   All ATMega architectures must provide the following entry point.  This entry
+ *   point is called early in the intitialization -- after all memory has been
+ *   configured and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void up_boardinitialize(void)
+{
+  /* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
+   * function atmega_spiinitialize() has been brought into the link.
+   */
+
+#if defined(CONFIG_AVR_SPI1) || defined(CONFIG_AVR_SPI2)
+  if (atmega_spiinitialize)
+    {
+      atmega_spiinitialize();
+    }
+#endif
+
+  /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+  atmega_ledinit();
+#endif
+}
diff --git a/nuttx/configs/micropendous3/include/board.h b/nuttx/configs/micropendous3/include/board.h
index 9af841c9d..f5b9585d7 100755
--- a/nuttx/configs/micropendous3/include/board.h
+++ b/nuttx/configs/micropendous3/include/board.h
@@ -34,8 +34,8 @@
  *

  ****************************************************************************/

 

-#ifndef __CONFIGS_MICROPENDOUS_INCLUDE_BOARD_H

-#define __CONFIGS_MICROPENDOUS_INCLUDE_BOARD_H

+#ifndef __CONFIGS_MICROPENDOUS3_INCLUDE_BOARD_H

+#define __CONFIGS_MICROPENDOUS3_INCLUDE_BOARD_H

 

 /****************************************************************************

  * Included Files

@@ -90,4 +90,4 @@ extern "C" {
 #endif

 

 #endif /* __ASSEMBLY__ */

-#endif /* __CONFIGS_MICROPENDOUS_INCLUDE_BOARD_H */

+#endif /* __CONFIGS_MICROPENDOUS3_INCLUDE_BOARD_H */

diff --git a/nuttx/configs/micropendous3/ostest/defconfig b/nuttx/configs/micropendous3/ostest/defconfig
index de3a7328b..e1b78f04c 100644
--- a/nuttx/configs/micropendous3/ostest/defconfig
+++ b/nuttx/configs/micropendous3/ostest/defconfig
@@ -55,7 +55,7 @@
 # CONFIG_ARCH_NOINTC - define if the architecture does not
 #   support an interrupt controller or otherwise cannot support
 #   APIs like up_enable_irq() and up_disable_irq().
-# CONFIG_ARCH_IRQPRIO - The AT90USB supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The AT90USB does not support interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be