diff options
-rw-r--r-- | nuttx/arch/arm/src/sama5/chip/sam_adc.h | 12 | ||||
-rw-r--r-- | nuttx/arch/arm/src/sama5/sam_adc.c | 147 | ||||
-rw-r--r-- | nuttx/arch/arm/src/sama5/sam_adc.h | 37 | ||||
-rw-r--r-- | nuttx/arch/arm/src/sama5/sam_touchscreen.c | 257 | ||||
-rw-r--r-- | nuttx/arch/arm/src/sama5/sam_touchscreen.h | 3 | ||||
-rw-r--r-- | nuttx/configs/sama5d3x-ek/include/board_384mhz.h | 14 | ||||
-rw-r--r-- | nuttx/configs/sama5d3x-ek/include/board_396mhz.h | 16 |
7 files changed, 340 insertions, 146 deletions
diff --git a/nuttx/arch/arm/src/sama5/chip/sam_adc.h b/nuttx/arch/arm/src/sama5/chip/sam_adc.h index 1755b1f58..f466e2b73 100644 --- a/nuttx/arch/arm/src/sama5/chip/sam_adc.h +++ b/nuttx/arch/arm/src/sama5/chip/sam_adc.h @@ -432,12 +432,16 @@ # define ADC_TSMR_TSMODE_5WIRE (3 << ADC_TSMR_TSMODE_SHIFT) /* 5-wire Touchscreen */ #define ADC_TSMR_TSAV_SHIFT (4) /* Bit 4-5: Touchscreen Average */ #define ADC_TSMR_TSAV_MASK (3 << ADC_TSMR_TSAV_SHIFT) -# define ADC_TSMR_TSAV_ NFILTER (0 << ADC_TSMR_TSAV_SHIFT) /* No Filtering */ -# define ADC_TSMR_TSAV_ 2CONV (1 << ADC_TSMR_TSAV_SHIFT) /* Average 2 ADC conversions */ -# define ADC_TSMR_TSAV_ 4CONV (2 << ADC_TSMR_TSAV_SHIFT) /* Average 4 ADC conversions */ -# define ADC_TSMR_TSAV_ 8CONV (3 << ADC_TSMR_TSAV_SHIFT) /* Averages 8 ADC conversions */ +# define ADC_TSMR_TSAV_NFILTER (0 << ADC_TSMR_TSAV_SHIFT) /* No Filtering */ +# define ADC_TSMR_TSAV_2CONV (1 << ADC_TSMR_TSAV_SHIFT) /* Average 2 ADC conversions */ +# define ADC_TSMR_TSAV_4CONV (2 << ADC_TSMR_TSAV_SHIFT) /* Average 4 ADC conversions */ +# define ADC_TSMR_TSAV_8CONV (3 << ADC_TSMR_TSAV_SHIFT) /* Averages 8 ADC conversions */ #define ADC_TSMR_TSFREQ_SHIFT (8) /* Bit 8-11: Touchscreen Frequency */ #define ADC_TSMR_TSFREQ_MASK (15 << ADC_TSMR_TSFREQ_SHIFT) +# define ADC_TSMR_TSFREQ_DIV1 (0 << ADC_TSMR_TSFREQ_SHIFT) /* TS freq = trigger freq */ +# define ADC_TSMR_TSFREQ_DIV2 (1 << ADC_TSMR_TSFREQ_SHIFT) /* TS freq = trigger freq / 2 */ +# define ADC_TSMR_TSFREQ_DIV4 (2 << ADC_TSMR_TSFREQ_SHIFT) /* TS freq = trigger freq / 4 */ +# define ADC_TSMR_TSFREQ_DIV8 (3 << ADC_TSMR_TSFREQ_SHIFT) /* TS freq = trigger freq / 8 */ # define ADC_TSMR_TSFREQ(n) ((uint32_t)(n) << ADC_TSMR_TSFREQ_SHIFT) #define ADC_TSMR_TSSCTIM_SHIFT (16) /* Bit 16-19: Touchscreen Switches Closure Time */ #define ADC_TSMR_TSSCTIM_MASK (15 << ADC_TSMR_TSSCTIM_SHIFT) diff --git a/nuttx/arch/arm/src/sama5/sam_adc.c b/nuttx/arch/arm/src/sama5/sam_adc.c index cc6e94561..9af6cdc2c 100644 --- a/nuttx/arch/arm/src/sama5/sam_adc.c +++ b/nuttx/arch/arm/src/sama5/sam_adc.c @@ -50,6 +50,7 @@ #include <arch/board/board.h> #include <nuttx/arch.h> +#include <nuttx/wqueue.h> #include <nuttx/analog/adc.h> #include "up_internal.h" @@ -147,11 +148,13 @@ struct sam_adc_s { #ifdef SAMA5_ADC_HAVE_CHANNELS struct adc_dev_s dev; /* The external via of the ADC device */ - + uint32_t pending; /* Pending EOC events */ #ifdef CONFIG_SAMA5_ADC_DMA DMA_HANDLE dma; /* Handle for DMA channel */ #endif + struct work_s work; /* Supports the interrupt handling "bottom half" */ #endif + sem_t exclsem; /* Supports exclusive access to the ADC interface */ /* Debug stuff */ @@ -184,7 +187,8 @@ static int sam_adc_dmasetup(struct sam_adc_s *priv, FAR uint8_t *buffer, /* ADC interrupt handling */ #ifdef SAMA5_ADC_HAVE_CHANNELS -static void sam_adc_endconversion(struct sam_adc_s *priv, uint32_t pending); +static void sam_tsd_bottomhalf(void *arg); +static int sam_tsd_schedule(struct sam_tsd_s *priv, uint32_t pending); #endif static int sam_adc_interrupt(int irq, void *context); @@ -321,7 +325,7 @@ static void sam_adc_dmacallback(DMA_HANDLE handle, void *arg, int result) * invalidating the data cache. * * Input Parameters: - * dev - An instance of the SDIO device interface + * priv - An instance of the ADC device interface * buffer - The memory to DMA from * buflen - The size of the DMA transfer in bytes * @@ -331,10 +335,9 @@ static void sam_adc_dmacallback(DMA_HANDLE handle, void *arg, int result) ****************************************************************************/ #ifdef CONFIG_SAMA5_ADC_DMA -static int sam_adc_dmasetup(FAR struct sdio_dev_s *dev, FAR uint8_t *buffer, +static int sam_adc_dmasetup(FAR struct sam_adc_s *priv, FAR uint8_t *buffer, size_t buflen) { - struct sam_dev_s *priv = (struct sam_dev_s *)dev; uint32_t paddr; uint32_t maddr; @@ -370,18 +373,40 @@ static int sam_adc_dmasetup(FAR struct sdio_dev_s *dev, FAR uint8_t *buffer, * ADC interrupt handling ****************************************************************************/ /**************************************************************************** - * Name: sam_adc_endconversion + * Name: sam_tsd_bottomhalf * * Description: - * End of conversion interrupt handler + * This function executes on the worker thread. It is scheduled by + * sam_tsd_interrupt whenever any enabled end-of-conversion event occurs. + * All EOC interrupts are disabled when this function runs. sam_tsd_bottomhalf + * will re-enable EOC interrupts when it completes processing all pending + * EOC events. + * + * Input Parameters + * arg - The ADC private data structure cast to (void *) + * + * Returned Value: + * None * ****************************************************************************/ -static void sam_adc_endconversion(struct sam_adc_s *priv, uint32_t pending) +static void sam_tsd_bottomhalf(void *arg) { + struct sam_tsd_s *priv = (struct sam_tsd_s *)arg; uint32_t regval; + uint32_t pending; int chan; + ASSERT(priv != NULL); + + /* Get the set of unmasked, pending ADC interrupts */ + + pending = priv->pending; + + /* Get exclusive access to the driver data structure */ + + sam_adc_lock(priv->adc); + /* Check for the end of conversion event on each channel */ for (chan = 0; chan < SAM_ADC_NCHANNELS && pending != 0; chan++) @@ -396,8 +421,54 @@ static void sam_adc_endconversion(struct sam_adc_s *priv, uint32_t pending) pending &= ~bit; } } + + + /* Exit, re-enabling ADC interrupts */ + +ignored: + /* Re-enable ADC interrupts. */ + + sam_adc_putreg32(priv->adc, SAM_ADC_IER, SAMA5_CHAN_ENABLE); + + /* Release our lock on the ADC structure */ + + sem_adc_unlock(priv->adc); } +/**************************************************************************** + * Name: sam_tsd_schedule + ****************************************************************************/ + +static int sam_tsd_schedule(struct sam_tsd_s *priv, uint32_t pending) +{ + int ret; + + /* Disable further touchscreen interrupts. Touchscreen interrupts will be + * re-enabled after the worker thread executes. + */ + + sam_adc_putreg32(priv->adc, SAM_ADC_IDR, ADC_INT_EOCALL); + + /* Save the set of pending interrupts for the bottom half (in case any + * were cleared by reading the ISR. + */ + + priv->pending = pending. + + /* Transfer processing to the worker thread. Since touchscreen ADC interrupts are + * disabled while the work is pending, no special action should be required + * to protected the work queue. + */ + + DEBUGASSERT(priv->work.worker == NULL); + ret = work_queue(HPWORK, &priv->work, sam_tsd_bottomhalf, priv, 0); + if (ret != 0) + { + illdbg("Failed to queue work: %d\n", ret); + } + + return OK; +} #endif /* SAMA5_ADC_HAVE_CHANNELS */ /**************************************************************************** @@ -439,9 +510,16 @@ static int sam_adc_interrupt(int irq, void *context) if ((pending & ADC_INT_EOCALL) != 0) { - /* Let the touchscreen handle its interrupts */ + /* Schedule sampling to occur by the interrupt bottom half on the + * worker thread. + */ + + ret = sam_tsd_schedule(priv, pending); + if (ret < 0) + { + idbg("ERROR: sam_tsd_schedule failed: %d\n", ret); + } - sam_adc_endconversion(pending); pending &= ~ADC_INT_EOCALL; } #endif @@ -649,6 +727,10 @@ struct adc_dev_s *sam_adc_initialize(void) sam_configpio(PIO_ADC_TRG); #endif + /* Initialize the ADC device data structure */ + + sem_init(&priv->exclsem, 0, 1); + #ifdef CONFIG_SAMA5_ADC_DMA /* Allocate a DMA channel */ @@ -670,6 +752,44 @@ struct adc_dev_s *sam_adc_initialize(void) } /**************************************************************************** + * Name: sam_adc_lock + * + * Description: + * Get exclusive access to the ADC interface + * + ****************************************************************************/ + +void sam_adc_lock(FAR struct sam_adc_s *priv) +{ + int ret; + + do + { + ret = sem_wait(&priv->exclsem); + + /* This should only fail if the wait was canceled by an signal + * (and the worker thread will receive a lot of signals). + */ + + DEBUGASSERT(ret == OK || errno == EINTR); + } + while (ret < 0); +} + +/**************************************************************************** + * Name: sam_adc_unlock + * + * Description: + * Relinquish the lock on the ADC interface + * + ****************************************************************************/ + +void sam_adc_unlock(FAR struct sam_adc_s *priv) +{ + sem_post(&priv->exclsem) +} + +/**************************************************************************** * Name: sam_adc_getreg * * Description: @@ -678,9 +798,8 @@ struct adc_dev_s *sam_adc_initialize(void) ****************************************************************************/ #ifdef CONFIG_SAMA5_ADC_REGDEBUG -static uint32_t sam_adc_getreg(ADC_HANDLE handle, uintptr_t address) +static uint32_t sam_adc_getreg(struct sam_adc_s *priv, uintptr_t address) { - struct sam_adc_s *priv = (struct sam_adc_s *)handle; uint32_t regval = getreg32(address); if (sam_adc_checkreg(priv, false, regval, address)) @@ -701,10 +820,8 @@ static uint32_t sam_adc_getreg(ADC_HANDLE handle, uintptr_t address) ****************************************************************************/ #ifdef CONFIG_SAMA5_ADC_REGDEBUG -void sam_adc_putreg(ADC_HANDLE handle, uintptr_t address, uint32_t regval) +void sam_adc_putreg(struct sam_adc_s *priv, uintptr_t address, uint32_t regval) { - struct sam_adc_s *priv = (struct sam_adc_s *)handle; - if (sam_adc_checkreg(priv, true, regval, address)) { lldbg("%08x<-%08x\n", address, regval); diff --git a/nuttx/arch/arm/src/sama5/sam_adc.h b/nuttx/arch/arm/src/sama5/sam_adc.h index 803086ec2..2a9e00108 100644 --- a/nuttx/arch/arm/src/sama5/sam_adc.h +++ b/nuttx/arch/arm/src/sama5/sam_adc.h @@ -50,6 +50,10 @@ ****************************************************************************/ /* Configuration ************************************************************/ +#ifndef CONFIG_SCHED_WORKQUEUE +# error Work queue support is required (CONFIG_SCHED_WORKQUEUE) +#endif + #ifndef CONFIG_DEBUG # undef CONFIG_SAMA5_ADC_REGDEBUG #endif @@ -116,22 +120,43 @@ extern "C" * ****************************************************************************/ -FAR struct adc_dev_s *sam_adcinitialize(void); +struct sam_adc_s; +FAR struct sam_adc_s *sam_adcinitialize(void); /**************************************************************************** * Interfaces exported from the ADC to the touchscreen driver ****************************************************************************/ /**************************************************************************** + * Name: sam_adc_lock + * + * Description: + * Get exclusive access to the ADC interface + * + ****************************************************************************/ + +void sam_adc_lock(FAR struct sam_adc_s *priv); + +/**************************************************************************** + * Name: sam_adc_unlock + * + * Description: + * Relinquish the lock on the ADC interface + * + ****************************************************************************/ + +void sam_adc_unlock(FAR struct sam_adc_s *priv); + +/**************************************************************************** * Name: sam_adc_getreg * * Description: - * Read any 32-bit register using an absolute address. + * Read any 32-bit register using an absolute address. * ****************************************************************************/ #ifdef CONFIG_SAMA5_ADC_REGDEBUG -uint32_t sam_adc_getreg(FAR struct adc_dev_s *, uintptr_t address) +uint32_t sam_adc_getreg(FAR struct sam_adc_s *priv, uintptr_t address); #else # define sam_adc_getreg(handle,addr) getreg32(addr) #endif @@ -140,13 +165,13 @@ uint32_t sam_adc_getreg(FAR struct adc_dev_s *, uintptr_t address) * Name: sam_adc_putreg * * Description: - * Write to any 32-bit register using an absolute address. + * Write to any 32-bit register using an absolute address. * ****************************************************************************/ #ifdef CONFIG_SAMA5_ADC_REGDEBUG -void sam_adc_putreg(FAR struct adc_dev_s *dev, uintptr_t address, - uint32_t regval) +void sam_adc_putreg(FAR struct sam_adc_s *priv, uintptr_t address, + uint32_t regval); #else # define sam_adc_putreg(handle,addr,val) putreg32(val,addr) #endif diff --git a/nuttx/arch/arm/src/sama5/sam_touchscreen.c b/nuttx/arch/arm/src/sama5/sam_touchscreen.c index 3792af259..ee59677cd 100644 --- a/nuttx/arch/arm/src/sama5/sam_touchscreen.c +++ b/nuttx/arch/arm/src/sama5/sam_touchscreen.c @@ -139,10 +139,9 @@ struct sam_tsd_s uint16_t threshx; /* Thresholding X value */ uint16_t threshy; /* Thresholding Y value */ volatile uint32_t pending; /* Pending interrupt set set */ - sem_t devsem; /* Manages exclusive access to this structure */ sem_t waitsem; /* Used to wait for the availability of data */ - struct adc_dev_s *dev; /* ADC device handle */ + struct sam_adc_s *adc; /* ADC device handle */ struct work_s work; /* Supports the interrupt handling "bottom half" */ struct sam_sample_s sample; /* Last sampled touch point data */ WDOG_ID wdog; /* Poll the position while the pen is down */ @@ -163,22 +162,22 @@ struct sam_tsd_s /* Interrupt bottom half logic and data sampling */ -static void sam_notify(struct sam_tsd_s *priv); -static int sam_sample(struct sam_tsd_s *priv, struct sam_sample_s *sample); -static int sam_waitsample(struct sam_tsd_s *priv, +static void sam_tsd_notify(struct sam_tsd_s *priv); +static int sam_tsd_sample(struct sam_tsd_s *priv, struct sam_sample_s *sample); +static int sam_tsd_waitsample(struct sam_tsd_s *priv, struct sam_sample_s *sample); -static void sam_bottomhalf(void *arg); -static int sam_schedule(struct sam_tsd_s *priv, uint32_t pending); -static void sam_wdog(int argc, uint32_t arg1, ...); +static void sam_tsd_bottomhalf(void *arg); +static int sam_tsd_schedule(struct sam_tsd_s *priv, uint32_t pending); +static void sam_tsd_expiry(int argc, uint32_t arg1, ...); /* Character driver methods */ -static int sam_open(struct file *filep); -static int sam_close(struct file *filep); -static ssize_t sam_read(struct file *filep, char *buffer, size_t len); -static int sam_ioctl(struct file *filep, int cmd, unsigned long arg); +static int sam_tsd_open(struct file *filep); +static int sam_tsd_close(struct file *filep); +static ssize_t sam_tsd_read(struct file *filep, char *buffer, size_t len); +static int sam_tsd_ioctl(struct file *filep, int cmd, unsigned long arg); #ifndef CONFIG_DISABLE_POLL -static int sam_poll(struct file *filep, struct pollfd *fds, bool setup); +static int sam_tsd_poll(struct file *filep, struct pollfd *fds, bool setup); #endif /**************************************************************************** @@ -189,14 +188,14 @@ static int sam_poll(struct file *filep, struct pollfd *fds, bool setup); static const struct file_operations g_tsdops = { - sam_open, /* open */ - sam_close, /* close */ - sam_read, /* read */ - 0, /* write */ - 0, /* seek */ - sam_ioctl /* ioctl */ + sam_tsd_open, /* open */ + sam_tsd_close, /* close */ + sam_tsd_read, /* read */ + 0, /* write */ + 0, /* seek */ + sam_tsd_ioctl /* ioctl */ #ifndef CONFIG_DISABLE_POLL - , sam_poll /* poll */ + , sam_tsd_poll /* poll */ #endif }; @@ -209,10 +208,10 @@ static struct sam_tsd_s g_tsd; ****************************************************************************/ /**************************************************************************** - * Name: sam_notify + * Name: sam_tsd_notify ****************************************************************************/ -static void sam_notify(struct sam_tsd_s *priv) +static void sam_tsd_notify(struct sam_tsd_s *priv) { #ifndef CONFIG_DISABLE_POLL int i; @@ -252,10 +251,10 @@ static void sam_notify(struct sam_tsd_s *priv) } /**************************************************************************** - * Name: sam_sample + * Name: sam_tsd_sample ****************************************************************************/ -static int sam_sample(struct sam_tsd_s *priv, struct sam_sample_s *sample) +static int sam_tsd_sample(struct sam_tsd_s *priv, struct sam_sample_s *sample) { irqstate_t flags; int ret = -EAGAIN; @@ -305,10 +304,10 @@ static int sam_sample(struct sam_tsd_s *priv, struct sam_sample_s *sample) } /**************************************************************************** - * Name: sam_waitsample + * Name: sam_tsd_waitsample ****************************************************************************/ -static int sam_waitsample(struct sam_tsd_s *priv, struct sam_sample_s *sample) +static int sam_tsd_waitsample(struct sam_tsd_s *priv, struct sam_sample_s *sample) { irqstate_t flags; int ret; @@ -329,13 +328,13 @@ static int sam_waitsample(struct sam_tsd_s *priv, struct sam_sample_s *sample) * run, but they cannot run yet because pre-emption is disabled. */ - sem_post(&priv->devsem); + sam_adc_unlock(priv->adc); /* Try to get the a sample... if we cannot, then wait on the semaphore * that is posted when new sample data is available. */ - while (sam_sample(priv, sample) < 0) + while (sam_tsd_sample(priv, sample) < 0) { /* Wait for a sample data */ @@ -350,7 +349,7 @@ static int sam_waitsample(struct sam_tsd_s *priv, struct sam_sample_s *sample) * the failure now. */ - idbg("sem_wait: %d\n", errno); + idbg("ERROR: sem_wait: %d\n", errno); DEBUGASSERT(errno == EINTR); ret = -EINTR; goto errout; @@ -364,7 +363,7 @@ static int sam_waitsample(struct sam_tsd_s *priv, struct sam_sample_s *sample) * Interrupts and pre-emption will be re-enabled while we wait. */ - ret = sem_wait(&priv->devsem); + sam_adc_lock(priv->adc); errout: /* Then re-enable interrupts. We might get interrupt here and there @@ -385,12 +384,71 @@ errout: } /**************************************************************************** - * Name: sam_bottomhalf + * Name: sam_tsd_setaverage + * + * Description: + * The ADC hardware can filter the touchscreen samples by averaging. The + * function selects (or de-selects) that filtering. + * + * Input Parameters + * priv - The touchscreen private data structure + * tsav - The new (shifted) value of the TSAV field of the ADC TSMR regsiter. + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void sam_tsd_setaverage(truct sam_tsd_s *priv, uint32_t tsav) +{ + uint32_t regval; + uint32_t minfreq; + uint32_t tsfreq; + + /* Get the current value of the TSMR register */ + + regval = sam_adc_getreg(priv->dev, SAM_ADC_TSMR); + + /* Get the unshifted TSAVE value and compare it to the touchscreen + * frequency + * + * minfreq = 0: No filtering + * minfreq = 1: Averages 2 ADC conversions + * minfreq = 2: Averages 4 ADC conversions + * minfreq = 3: Averages 8 ADC conversions + */ + + minfreq = (tsav >> ADC_TSMR_TSAV_SHIF); + if (minfreq) + { + /* TSFREQ: Defines the Touchscreen Frequency compared to the Trigger + * Frequency. --> TSFREQ must be greater or equal to TSAV. <-- + */ + + tsfreq = (regval & ADC_TSMR_TSFREQ_MASK) >> ADC_TSMR_TSFREQ_SHIFT; + if (minfreq > tsfreq) + { + /* Set TSFREQ = TSAV */ + + regval &= ~ADC_TSMR_TSFREQ_MASK; + regval |= ADC_TSMR_TSFREQ(minfreq); + } + } + + /* Save the new filter value */ + + regval &= ADC_TSMR_TSAV_MASK + regval |= tsav; + sam_adc_putreg(priv->dev, SAM_ADC_TSMR, regval); +} + +/**************************************************************************** + * Name: sam_tsd_bottomhalf * * Description: * This function executes on the worker thread. It is scheduled by * sam_tsd_interrupt whenever any interesting, enabled TSD event occurs. - * All TSD interrupts are disabled when this function runs. sam_bottomhalf + * All TSD interrupts are disabled when this function runs. sam_tsd_bottomhalf * will re-enable TSD interrupts when it completes processing all pending * TSD events. * @@ -402,7 +460,7 @@ errout: * ****************************************************************************/ -static void sam_bottomhalf(void *arg) +static void sam_tsd_bottomhalf(void *arg) { struct sam_tsd_s *priv = (struct sam_tsd_s *)arg; uint32_t pending; @@ -428,17 +486,7 @@ static void sam_bottomhalf(void *arg) /* Get exclusive access to the driver data structure */ - do - { - ret = sem_wait(&priv->devsem); - - /* This should only fail if the wait was canceled by an signal - * (and the worker thread will receive a lot of signals). - */ - - DEBUGASSERT(ret == OK || errno == EINTR); - } - while (ret < 0); + sam_adc_lock(priv->adc); /* Check for pen up or down by reading the PENIRQ GPIO. */ #warning Missing logic @@ -484,7 +532,7 @@ static void sam_bottomhalf(void *arg) * later. */ - wd_start(priv->wdog, TSD_WDOG_DELAY, sam_wdog, 1, (uint32_t)priv); + wd_start(priv->wdog, TSD_WDOG_DELAY, sam_tsd_expiry, 1, (uint32_t)priv); goto ignored; } else @@ -502,7 +550,7 @@ static void sam_bottomhalf(void *arg) /* Continue to sample the position while the pen is down */ - wd_start(priv->wdog, TSD_WDOG_DELAY, sam_wdog, 1, (uint32_t)priv); + wd_start(priv->wdog, TSD_WDOG_DELAY, sam_tsd_expiry, 1, (uint32_t)priv); /* Check the thresholds. Bail if there is no significant difference */ @@ -547,25 +595,25 @@ static void sam_bottomhalf(void *arg) /* Notify any waiters that new touchscreen data is available */ - sam_notify(priv); + sam_tsd_notify(priv); /* Exit, re-enabling touchscreen interrupts */ ignored: /* Re-enable touchscreen interrupts. */ - sam_adc_putreg32(priv->dev, SAM_ADC_IER, ADC_TSD_ALLINTS); + sam_adc_putreg32(priv->adc, SAM_ADC_IER, ADC_TSD_ALLINTS); /* Release our lock on the state structure */ - sem_post(&priv->devsem); + sem_adc_unlock(priv->adc); } /**************************************************************************** - * Name: sam_schedule + * Name: sam_tsd_schedule ****************************************************************************/ -static int sam_schedule(struct sam_tsd_s *priv, uint32_t pending) +static int sam_tsd_schedule(struct sam_tsd_s *priv, uint32_t pending) { int ret; @@ -579,7 +627,7 @@ static int sam_schedule(struct sam_tsd_s *priv, uint32_t pending) * re-enabled after the worker thread executes. */ - sam_adc_putreg32(priv->dev, SAM_ADC_IDR, ADC_TSD_ALLINTS); + sam_adc_putreg32(priv->adc, SAM_ADC_IDR, ADC_TSD_ALLINTS); /* Save the set of pending interrupts for the bottom half (in case any * were cleared by reading the ISR. @@ -593,7 +641,7 @@ static int sam_schedule(struct sam_tsd_s *priv, uint32_t pending) */ DEBUGASSERT(priv->work.worker == NULL); - ret = work_queue(HPWORK, &priv->work, sam_bottomhalf, priv, 0); + ret = work_queue(HPWORK, &priv->work, sam_tsd_bottomhalf, priv, 0); if (ret != 0) { illdbg("Failed to queue work: %d\n", ret); @@ -603,7 +651,7 @@ static int sam_schedule(struct sam_tsd_s *priv, uint32_t pending) } /**************************************************************************** - * Name: sam_wdog + * Name: sam_tsd_expiry * * Description: * While the pen is pressed, pen position is periodically polled via a @@ -611,7 +659,7 @@ static int sam_schedule(struct sam_tsd_s *priv, uint32_t pending) * ****************************************************************************/ -static void sam_wdog(int argc, uint32_t arg1, ...) +static void sam_tsd_expiry(int argc, uint32_t arg1, ...) { struct sam_tsd_s *priv = (struct sam_tsd_s *)((uintptr_t)arg1); uint32_t pending; @@ -621,34 +669,34 @@ static void sam_wdog(int argc, uint32_t arg1, ...) */ pending = sam_adc_getreg(priv, SAM_ADC_ISR) & ADC_TSD_ALLSTATUS; - (void)sam_schedule(priv, pending); + (void)sam_tsd_schedule(priv, pending); } /**************************************************************************** - * Name: sam_open + * Name: sam_tsd_open ****************************************************************************/ -static int sam_open(struct file *filep) +static int sam_tsd_open(struct file *filep) { ivdbg("Opening\n"); return OK; } /**************************************************************************** - * Name: sam_close + * Name: sam_tsd_close ****************************************************************************/ -static int sam_close(struct file *filep) +static int sam_tsd_close(struct file *filep) { ivdbg("Closing\n"); return OK; } /**************************************************************************** - * Name: sam_read + * Name: sam_tsd_read ****************************************************************************/ -static ssize_t sam_read(struct file *filep, char *buffer, size_t len) +static ssize_t sam_tsd_read(struct file *filep, char *buffer, size_t len) { struct inode *inode; struct sam_tsd_s *priv; @@ -673,25 +721,17 @@ static ssize_t sam_read(struct file *filep, char *buffer, size_t len) * handle smaller reads... but why? */ - idbg("Unsupported read size: %d\n", len); + idbg("ERROR: Unsupported read size: %d\n", len); return -ENOSYS; } /* Get exclusive access to the driver data structure */ - ret = sem_wait(&priv->devsem); - if (ret < 0) - { - /* This should only happen if the wait was canceled by an signal */ - - idbg("sem_wait: %d\n", errno); - DEBUGASSERT(errno == EINTR); - return -EINTR; - } + sem_adc_lock(priv->adc); /* Try to read sample data. */ - ret = sam_sample(priv, &sample); + ret = sam_tsd_sample(priv, &sample); if (ret < 0) { /* Sample data is not available now. We would ave to wait to get @@ -708,12 +748,12 @@ static ssize_t sam_read(struct file *filep, char *buffer, size_t len) /* Wait for sample data */ - ret = sam_waitsample(priv, &sample); + ret = sam_tsd_waitsample(priv, &sample); if (ret < 0) { /* We might have been awakened by a signal */ - idbg("sam_waitsample: %d\n", ret); + idbg("ERROR: sam_tsd_waitsample: %d\n", ret); goto errout; } } @@ -768,16 +808,16 @@ static ssize_t sam_read(struct file *filep, char *buffer, size_t len) ret = SIZEOF_TOUCH_SAMPLE_S(1); errout: - sem_post(&priv->devsem); + sem_adc_unlock(priv->adc); ivdbg("Returning: %d\n", ret); return ret; } /**************************************************************************** - * Name:sam_ioctl + * Name:sam_tsd_ioctl ****************************************************************************/ -static int sam_ioctl(struct file *filep, int cmd, unsigned long arg) +static int sam_tsd_ioctl(struct file *filep, int cmd, unsigned long arg) { struct inode *inode; struct sam_tsd_s *priv; @@ -792,14 +832,7 @@ static int sam_ioctl(struct file *filep, int cmd, unsigned long arg) /* Get exclusive access to the driver data structure */ - ret = sem_wait(&priv->devsem); - if (ret < 0) - { - /* This should only happen if the wait was canceled by an signal */ - - DEBUGASSERT(errno == EINTR); - return -EINTR; - } + sam_adc_lock(priv->adc); /* Process the IOCTL by command */ @@ -810,16 +843,16 @@ static int sam_ioctl(struct file *filep, int cmd, unsigned long arg) break; } - sem_post(&priv->devsem); + sam_adc_unlock(priv->adc); return ret; } /**************************************************************************** - * Name: sam_poll + * Name: sam_tsd_poll ****************************************************************************/ #ifndef CONFIG_DISABLE_POLL -static int sam_poll(struct file *filep, struct pollfd *fds, bool setup) +static int sam_tsd_poll(struct file *filep, struct pollfd *fds, bool setup) { struct inode *inode; struct sam_tsd_s *priv; @@ -833,16 +866,11 @@ static int sam_poll(struct file *filep, struct pollfd *fds, bool setup) DEBUGASSERT(inode && inode->i_private); priv = (struct sam_tsd_s *)inode->i_private; - /* Are we setting up the poll? Or tearing it down? */ + /* Get exclusive access to the ADC hardware */ - ret = sem_wait(&priv->devsem); - if (ret < 0) - { - /* This should only happen if the wait was canceled by an signal */ + sam_adc_lock(priv->adc); - DEBUGASSERT(errno == EINTR); - return -EINTR; - } + /* Are we setting up the poll? Or tearing it down? */ if (setup) { @@ -883,7 +911,7 @@ static int sam_poll(struct file *filep, struct pollfd *fds, bool setup) if (priv->penchange) { - sam_notify(priv); + sam_tsd_notify(priv); } } else if (fds->priv) @@ -900,7 +928,7 @@ static int sam_poll(struct file *filep, struct pollfd *fds, bool setup) } errout: - sem_post(&priv->devsem); + sam_adc_unlock(priv->adc); return ret; } #endif @@ -921,7 +949,8 @@ errout: * /dev/inputN where N is the minor device number * * Input Parameters: - * minor - The input device minor number + * adc - An opaque reference to the ADC device structure + * minor - The input device minor number * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is @@ -929,7 +958,7 @@ errout: * ****************************************************************************/ -int sam_tsd_register(struct adc_dev_s *dev, int minor) +int sam_tsd_register(struct sam_adc_s *adc, int minor) { struct sam_tsd_s *priv = &g_tsd; char devname[DEV_NAMELEN]; @@ -939,17 +968,16 @@ int sam_tsd_register(struct adc_dev_s *dev, int minor) /* Debug-only sanity checks */ - DEBUGASSERT(dev && minor >= 0 && minor < 100); + DEBUGASSERT(adc && minor >= 0 && minor < 100); /* Initialize the touchscreen device driver instance */ memset(priv, 0, sizeof(struct sam_tsd_s)); - priv->dev = dev; /* Save the ADC device handle */ + priv->adc = adc; /* Save the ADC device handle */ priv->wdog = wd_create(); /* Create a watchdog timer */ priv->threshx = INVALID_THRESHOLD; /* Initialize thresholding logic */ priv->threshy = INVALID_THRESHOLD; /* Initialize thresholding logic */ - sem_init(&priv->devsem, 0, 1); /* Initialize device structure semaphore */ sem_init(&priv->waitsem, 0, 0); /* Initialize pen event wait semaphore */ /* Make sure that interrupts are disabled and clear any pending interrupts */ @@ -969,7 +997,7 @@ int sam_tsd_register(struct adc_dev_s *dev, int minor) ret = register_driver(devname, &g_tsdops, 0666, priv); if (ret < 0) { - idbg("register_driver() failed: %d\n", ret); + idbg("ERROR: register_driver() failed: %d\n", ret); goto errout_with_priv; } @@ -977,10 +1005,10 @@ int sam_tsd_register(struct adc_dev_s *dev, int minor) * availability conditions. */ - ret = work_queue(HPWORK, &priv->work, sam_bottomhalf, priv, 0); + ret = work_queue(HPWORK, &priv->work, sam_tsd_bottomhalf, priv, 0); if (ret != 0) { - idbg("Failed to queue work: %d\n", ret); + idbg("ERROR: Failed to queue work: %d\n", ret); goto errout_with_priv; } @@ -989,7 +1017,6 @@ int sam_tsd_register(struct adc_dev_s *dev, int minor) return OK; errout_with_priv: - sem_destroy(&priv->devsem); sem_destroy(&priv->waitsem); return ret; } @@ -1017,24 +1044,14 @@ void sam_tsd_interrupt(uint32_t pending) if ((pending & ADC_TSD_ALLINTS) != 0) { - /* Disable further touchscreen interrupts */ - - sam_adc_putreg32(priv->dev, SAM_ADC_IDR, ADC_TSD_ALLINTS); - - /* Save the set of pending interrupts for the bottom half (in case any - * were cleared by reading the ISR. - */ - - priv->pending = pending & ADC_TSD_ALLSTATUS; - /* Schedule sampling to occur by the interrupt bottom half on the * worker thread. */ - ret = sam_schedule(priv, pending); + ret = sam_tsd_schedule(priv, pending); if (ret < 0) { - idbg("ERROR: sam_schedule failed: %d\n", ret); + idbg("ERROR: sam_tsd_schedule failed: %d\n", ret); } } diff --git a/nuttx/arch/arm/src/sama5/sam_touchscreen.h b/nuttx/arch/arm/src/sama5/sam_touchscreen.h index eebf32a93..ddadcaf86 100644 --- a/nuttx/arch/arm/src/sama5/sam_touchscreen.h +++ b/nuttx/arch/arm/src/sama5/sam_touchscreen.h @@ -88,7 +88,8 @@ extern "C" * ****************************************************************************/ -int sam_tsd_register(FAR struct adc_dev_s *dev, int minor); +struct sam_adc_s; +int sam_tsd_register(FAR struct sam_adc_s *adc, int minor); /**************************************************************************** * Interfaces exported from the touchscreen to the ADC driver diff --git a/nuttx/configs/sama5d3x-ek/include/board_384mhz.h b/nuttx/configs/sama5d3x-ek/include/board_384mhz.h index 02815c1eb..df85ded06 100644 --- a/nuttx/configs/sama5d3x-ek/include/board_384mhz.h +++ b/nuttx/configs/sama5d3x-ek/include/board_384mhz.h @@ -143,12 +143,26 @@ # endif #endif +/* ADC Configuration + * + * ADCClock = MCK / ((PRESCAL+1) * 2) + * + * Given: + * MCK = 128MHz + * ADCClock = 8MHz + * Then: + * PRESCAL = 7 + */ + +#define BOARD_ADC_PRESCAL (7) + /* Resulting frequencies */ #define BOARD_MAINOSC_FREQUENCY (12000000) /* MAINOSC: 12MHz crystal on-board */ #define BOARD_PLLA_FREQUENCY (768000000) /* PLLACK: 64 * 12Mhz / 1 */ #define BOARD_PCK_FREQUENCY (384000000) /* CPU: PLLACK / 2 / 1 */ #define BOARD_MCK_FREQUENCY (128000000) /* MCK: PLLACK / 2 / 1 / 3 */ +#define BOARD_ADCCLK_FREQUENCY (8000000) /* ADCCLK: MCK / ((7+1)*2) */ /* HSMCI clocking * diff --git a/nuttx/configs/sama5d3x-ek/include/board_396mhz.h b/nuttx/configs/sama5d3x-ek/include/board_396mhz.h index 16dfb2e10..9d3f45759 100644 --- a/nuttx/configs/sama5d3x-ek/include/board_396mhz.h +++ b/nuttx/configs/sama5d3x-ek/include/board_396mhz.h @@ -99,12 +99,28 @@ #define BOARD_PMC_MCKR_PLLADIV PMC_MCKR_PLLADIV2 #define BOARD_PMC_MCKR_MDIV PMC_MCKR_MDIV_PCKDIV3 +/* ADC Configuration + * + * ADCClock = MCK / ((PRESCAL+1) * 2) + * + * Given: + * MCK = 132MHz + * ADCClock = 8MHz + * Then: + * PRESCAL = 7.25 + * + * PRESCAL=7 and MCK=132MHz yields ADC clock of 8.25MHz + */ + +#define BOARD_ADC_PRESCAL (7) + /* Resulting frequencies */ #define BOARD_MAINOSC_FREQUENCY (12000000) /* MAINOSC: 12MHz crystal on-board */ #define BOARD_PLLA_FREQUENCY (792000000) /* PLLACK: 66 * 12Mhz / 1 */ #define BOARD_PCK_FREQUENCY (396000000) /* CPU: PLLACK / 2 / 1 */ #define BOARD_MCK_FREQUENCY (132000000) /* MCK: PLLACK / 2 / 1 / 3 */ +#define BOARD_ADCCLK_FREQUENCY (8250000) /* ADCCLK: MCK / ((7+1)*2) */ #if defined(CONFIG_SAMA5_EHCI) || defined(CONFIG_SAMA5_OHCI) || \ defined(CONFIG_SAMA5_UDPHS) |