diff options
-rw-r--r-- | nuttx/ChangeLog | 3 | ||||
-rw-r--r-- | nuttx/TODO | 10 | ||||
-rw-r--r-- | nuttx/arch/mips/src/pic32mx/pic32mx-internal.h | 4 | ||||
-rw-r--r-- | nuttx/arch/mips/src/pic32mx/pic32mx-usbotg.h | 663 | ||||
-rw-r--r-- | nuttx/configs/sure-pic32mx/src/Makefile | 4 | ||||
-rw-r--r-- | nuttx/configs/sure-pic32mx/src/sure-internal.h | 16 | ||||
-rw-r--r-- | nuttx/configs/sure-pic32mx/src/up_boot.c | 9 | ||||
-rw-r--r-- | nuttx/configs/sure-pic32mx/src/up_spi.c | 24 | ||||
-rwxr-xr-x | nuttx/tools/configure.sh | 6 |
9 files changed, 408 insertions, 331 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 86f0969ac..c0a71d83a 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2300,3 +2300,6 @@ 6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> + * tools/Makefile.txport, mkexport.sh, and configure.sh. Changes submitted + by Mike Smith to support configuration and 'make export' on MAC OS. + diff --git a/nuttx/TODO b/nuttx/TODO index b0577aa87..4d65e6ce8 100644 --- a/nuttx/TODO +++ b/nuttx/TODO @@ -1,4 +1,4 @@ -NuttX TODO List (Last updated December 20, 2011) +NuttX TODO List (Last updated December 27, 2011) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This file summarizes known NuttX bugs, limitations, inconsistencies with @@ -31,7 +31,7 @@ nuttx/ (2) ARM/LPC313x (arch/arm/src/lpc313x/) (3) ARM/STR71x (arch/arm/src/str71x/) (3) ARM/LM3S6918 (arch/arm/src/lm3s/) - (4) ARM/STM32 (arch/arm/src/stm32/) + (5) ARM/STM32 (arch/arm/src/stm32/) (3) AVR (arch/avr) (0) Intel x86 (arch/x86) (4) 8051 / MCS51 (arch/8051/) @@ -1072,6 +1072,12 @@ o ARM/STM32 (arch/arm/src/stm32/) Priority: Low until someone needs DMA1, Channel 5 (ADC3, UART4_TX, TIM5_CH1, or TIM8_CH2). + Title: UNFINISHED DRIVERS + Description: The following drivers are incomplete: DAC. The following drivers + are untested: DMA on the F4, CAN. + Status: Open + Priority: Medium + o AVR (arch/avr) ^^^^^^^^^^^^^^ diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h b/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h index 004d4eeea..5d6a8e060 100644 --- a/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h +++ b/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h @@ -57,7 +57,7 @@ /* GPIO settings used in the configport, readport, writeport, etc. * * General encoding: - * MMxV Ixxx RRRx PPPP + * MMxV IIxx RRRx PPPP */ #define GPIO_MODE_SHIFT (14) /* Bits 14-15: I/O mode */ @@ -70,7 +70,7 @@ # define GPIO_VALUE_ONE (1 << 12) # define GPIO_VALUE_ZERO (0) -#define GPIO_INT_SHIFT (14) /* Bits 10-11: Interrupt mode */ +#define GPIO_INT_SHIFT (10) /* Bits 10-11: Interrupt mode */ #define GPIO_INT_MASK (3 << GPIO_INT_SHIFT) # define GPIO_INT_NONE (0 << GPIO_INT_SHIFT) /* Bit 00: No interrupt */ # define GPIO_INT (1 << GPIO_INT_SHIFT) /* Bit 01: Change notification enable */ diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-usbotg.h b/nuttx/arch/mips/src/pic32mx/pic32mx-usbotg.h index d67b2ff02..549b4f71d 100644 --- a/nuttx/arch/mips/src/pic32mx/pic32mx-usbotg.h +++ b/nuttx/arch/mips/src/pic32mx/pic32mx-usbotg.h @@ -1,313 +1,350 @@ -/************************************************************************************
- * arch/mips/src/pic32mx/pic32mx-usbotg.h
- *
- * Copyright (C) 2011 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H
-#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-
-#include "pic32mx-memorymap.h"
-
-/************************************************************************************
- * Pre-Processor Definitions
- ************************************************************************************/
-/* Register Offsets *****************************************************************/
-
-#define PIC32MX_USBOTG_IR_OFFSET 0x0040 /* USB OTG Interrupt Flags Register */
-#define PIC32MX_USBOTG_IE_OFFSET 0x0050 /* USB OTG Interrupt Enable Register */
-#define PIC32MX_USBOTG_STAT_OFFSET 0x0060 /* USB Comparator and Pin Status Register */
-#define PIC32MX_USBOTG_CON_OFFSET 0x0070 /* USB Resistor and Pin Control Register */
-#define PIC32MX_USB_PWRC_OFFSET 0x0080 /* USB Power Control Register */
-#define PIC32MX_USB_IR_OFFSET 0x0200 /* USB Pending Interrupt Register */
-#define PIC32MX_USB_IE_OFFSET 0x0210 /* USB Interrupt Enable Register */
-#define PIC32MX_USB_EIR_OFFSET 0x0220 /* USB Pending Error Interrupt Register */
-#define PIC32MX_USB_EIE_OFFSET 0x0230 /* USB Interrupt Error Enable Register */
-#define PIC32MX_USB_STAT_OFFSET 0x0240 /* USB Status FIFO Register */
-#define PIC32MX_USB_CON_OFFSET 0x0250 /* USB Module Control Register */
-#define PIC32MX_USB_ADDR_OFFSET 0x0260 /* USB Address Register */
-#define PIC32MX_USB_FRMH_OFFSET 0x0290 /* USB Frame Counter Register (high) */
-#define PIC32MX_USB_FRML_OFFSET 0x0280 /* USB Frame Counter Register (low) */
-#define PIC32MX_USB_TOK_OFFSET 0x02a0 /* USB Host Control Register */
-#define PIC32MX_USB_SOF_OFFSET 0x02b0 /* USB SOF Counter Register */
-#define PIC32MX_USB_BDTP1_OFFSET 0x0270 /* USB Buffer Descriptor Table Pointer Register 1 */
-#define PIC32MX_USB_BDTP2_OFFSET 0x02c0 /* USB Buffer Descriptor Table Pointer Register 2 */
-#define PIC32MX_USB_BDTP3_OFFSET 0x02d0 /* USB Buffer Descriptor Table Pointer Register 3 */
-#define PIC32MX_USB_CNFG1_OFFSET 0x02e0 /* USB Debug and Idle Register */
-
-#define PIC32MX_USB_EP_OFFSET(n) 0x0300 /* USB Endpoint n Control Register */
-#define PIC32MX_USB_EP0_OFFSET 0x0300 /* USB Endpoint 0 Control Register */
-#define PIC32MX_USB_EP1_OFFSET 0x0310 /* USB Endpoint 1 Control Register */
-#define PIC32MX_USB_EP2_OFFSET 0x0320 /* USB Endpoint 2 Control Register */
-#define PIC32MX_USB_EP3_OFFSET 0x0330 /* USB Endpoint 3 Control Register */
-#define PIC32MX_USB_EP4_OFFSET 0x0340 /* USB Endpoint 4 Control Register */
-#define PIC32MX_USB_EP5_OFFSET 0x0350 /* USB Endpoint 5 Control Register */
-#define PIC32MX_USB_EP6_OFFSET 0x0360 /* USB Endpoint 6 Control Register */
-#define PIC32MX_USB_EP7_OFFSET 0x0370 /* USB Endpoint 7 Control Register */
-#define PIC32MX_USB_EP8_OFFSET 0x0380 /* USB Endpoint 8 Control Register */
-#define PIC32MX_USB_EP9_OFFSET 0x0390 /* USB Endpoint 9 Control Register */
-#define PIC32MX_USB_EP10_OFFSET 0x03a0 /* USB Endpoint 10 Control Register */
-#define PIC32MX_USB_EP11_OFFSET 0x03b0 /* USB Endpoint 11 Control Register */
-#define PIC32MX_USB_EP12_OFFSET 0x03c0 /* USB Endpoint 12 Control Register */
-#define PIC32MX_USB_EP13_OFFSET 0x03d0 /* USB Endpoint 13 Control Register */
-#define PIC32MX_USB_EP14_OFFSET 0x03e0 /* USB Endpoint 14 Control Register */
-#define PIC32MX_USB_EP15_OFFSET 0x03f0 /* USB Endpoint 15 Control Register */
-
-/* Register Addresses ***************************************************************/
-
-#define PIC32MX_USBOTG_IR (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IR_OFFSET)
-#define PIC32MX_USBOTG_IE (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IE_OFFSET)
-#define PIC32MX_USBOTG_STAT (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_STAT_OFFSET)
-#define PIC32MX_USBOTG_CON (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_CON_OFFSET)
-#define PIC32MX_USB_PWRC (PIC32MX_USB_K1BASE+PIC32MX_USB_PWRC_OFFSET)
-#define PIC32MX_USB_IR (PIC32MX_USB_K1BASE+PIC32MX_USB_IR_OFFSET)
-#define PIC32MX_USB_IE (PIC32MX_USB_K1BASE+PIC32MX_USB_IE_OFFSET)
-#define PIC32MX_USB_EIR (PIC32MX_USB_K1BASE+PIC32MX_USB_EIR_OFFSET)
-#define PIC32MX_USB_EIE (PIC32MX_USB_K1BASE+PIC32MX_USB_EIE_OFFSET)
-#define PIC32MX_USB_STAT (PIC32MX_USB_K1BASE+PIC32MX_USB_STAT_OFFSET)
-#define PIC32MX_USB_CON (PIC32MX_USB_K1BASE+PIC32MX_USB_CON_OFFSET)
-#define PIC32MX_USB_ADDR (PIC32MX_USB_K1BASE+PIC32MX_USB_ADDR_OFFSET)
-#define PIC32MX_USB_FRMH (PIC32MX_USB_K1BASE+PIC32MX_USB_FRMH_OFFSET)
-#define PIC32MX_USB_FRML (PIC32MX_USB_K1BASE+PIC32MX_USB_FRML_OFFSET)
-#define PIC32MX_USB_TOK (PIC32MX_USB_K1BASE+PIC32MX_USB_TOK_OFFSET)
-#define PIC32MX_USB_SOF (PIC32MX_USB_K1BASE+PIC32MX_USB_SOF_OFFSET)
-#define PIC32MX_USB_BDTP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP1_OFFSET)
-#define PIC32MX_USB_BDTP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP2_OFFSET)
-#define PIC32MX_USB_BDTP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP3_OFFSET)
-#define PIC32MX_USB_CNFG1 (PIC32MX_USB_K1BASE+PIC32MX_USB_CNFG1_OFFSET)
-
-#define PIC32MX_USB_EP(n) (PIC32MX_USB_K1BASE+PIC32MX_USB_EP_OFFSET(n))
-#define PIC32MX_USB_EP0 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP0_OFFSET)
-#define PIC32MX_USB_EP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP1_OFFSET)
-#define PIC32MX_USB_EP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP2_OFFSET)
-#define PIC32MX_USB_EP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP3_OFFSET)
-#define PIC32MX_USB_EP4 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP4_OFFSET)
-#define PIC32MX_USB_EP5 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP5_OFFSET)
-#define PIC32MX_USB_EP6 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP6_OFFSET)
-#define PIC32MX_USB_EP7 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP7_OFFSET)
-#define PIC32MX_USB_EP8 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP8_OFFSET)
-#define PIC32MX_USB_EP9 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP9_OFFSET)
-#define PIC32MX_USB_EP10 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP10_OFFSET)
-#define PIC32MX_USB_EP11 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP11_OFFSET)
-#define PIC32MX_USB_EP12 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP12_OFFSET)
-#define PIC32MX_USB_EP13 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP13_OFFSET)
-#define PIC32MX_USB_EP14 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP14_OFFSET)
-#define PIC32MX_USB_EP15 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP15_OFFSET)
-
-/* Register Bit-Field Definitions ***************************************************/
-
-/* USB OTG Interrupt Flags Register */
-/* USB OTG Interrupt Enable Register */
-
-#define USBOTG_INT_VBUSVD (1 << 0) /* Bit 0: A-Device VBUS Change Indicator */
-#define USBOTG_INT_SESEND (1 << 2) /* Bit 2: B-Device VBUS Change Indicator */
-#define USBOTG_INT_ACTV (1 << 4) /* Bit 4: Bus Activity Indicator */
-#define USBOTG_INT_SESVD (1 << 3) /* Bit 3: Session Valid Change Indicator */
-#define USBOTG_INT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */
-#define USBOTG_INT_T1MSEC (1 << 6) /* Bit 6: 1 Millisecond Timer */
-#define USBOTG_INT_ID (1 << 7) /* Bit 7: ID State Change Indicator */
-
-/* USB Comparator and Pin Status Register */
-
-#define USBOTG_STAT_VBUSVD (1 << 0) /* Bit 0: A-VBUS Valid Indicator */
-#define USBOTG_STAT_SESEND (1 << 2) /* Bit 2: B-Session End Indicator */
-#define USBOTG_STAT_SESVD (1 << 3) /* Bit 3: Session Valid Indicator */
-#define USBOTG_STAT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */
-#define USBOTG_STAT_ID (1 << 7) /* Bit 7: ID Pin State Indicator */
-
-/* USB Resistor and Pin Control Register */
-
-#define USBOTG_CON_VBUSDIS (1 << 0) /* Bit 0: VBUS Discharge Enable */
-#define USBOTG_CON_VBUSCHG (1 << 1) /* Bit 1: VBUS Charge Enable */
-#define USBOTG_CON_OTGEN (1 << 2) /* Bit 2: OTG Functionality Enable */
-#define USBOTG_CON_VBUSON (1 << 3) /* Bit 3: VBUS Power-on */
-#define USBOTG_CON_DMPULDWN (1 << 4) /* Bit 4: D- Pull-Down Enable */
-#define USBOTG_CON_DPPULDWN (1 << 5) /* Bit 5: D+ Pull-Down Enable */
-#define USBOTG_CON_DMPULUP (1 << 6) /* Bit 6: D- Pull-Up Enable */
-#define USBOTG_CON_DPPULUP (1 << 7) /* Bit 7: D+ Pull-Up Enable */
-
-/* USB Power Control Register */
-
-#define USB_PWRC_USBPWR (1 << 0) /* Bit 0: USB Operation Enable */
-#define USB_PWRC_USUSPEND (1 << 1) /* Bit 1: USB Suspend Mode */
-#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7)
-# define USB_PWRC_USBBUSY (1 << 3) /* Bit 3: USB Module Busy */
-#endif
-#define USB_PWRC_USLPGRD (1 << 4) /* Bit 4: USB Sleep Entry Guard */
-#define USB_PWRC_UACTPND (1 << 7) /* Bit 7: USB Activity Pending */
-
-/* USB Pending Interrupt Register */
-/* USB Interrupt Enable Register */
-
-#define USB_INT_URST (1 << 0) /* Bit 0: USB Reset Interrupt (Device mode) */
-#define USB_INT_DETACH (1 << 0) /* Bit 0: USB Detach Interrupt (Host mode) */
-#define USB_INT_UERR (1 << 1) /* Bit 1: USB Error Condition Interrupt */
-#define USB_INT_SOF (1 << 2) /* Bit 2: SOF Token Interrupt */
-#define USB_INT_TRN (1 << 3) /* Bit 3: Token Processing Complete Interrupt */
-#define USB_INT_IDLE (1 << 4) /* Bit 4 : Idle Detect Interrupt */
-#define USB_INT_RESUME (1 << 5) /* Bit 5: Resume Interrupt */
-#define USB_INT_ATTACH (1 << 6) /* Bit 6: Peripheral Attach Interrupt */
-#define USB_INT_STALL (1 << 7) /* Bit 7: STALL Handshake Interrupt */
-
-/* USB Pending Error Interrupt Register */
-/* USB Interrupt Error Enable Register */
-
-#define USB_EINT_PID (1 << 0) /* Bit 0: PID Check Failure Flag */
-#define USB_EINT_CRC5 (1 << 1) /* Bit 1: CRC5 Host Error Flag */
-#define USB_EINT_EOF (1 << 1) /* Bit 1: EOF Error Flag */
-#define USB_EINT_CRC16 (1 << 2) /* Bit 2: CRC16 Failure Flag */
-#define USB_EINT_DFN8 (1 << 3) /* Bit 3: Data Field Size Error Flag */
-#define USB_EINT_BTO (1 << 4) /* Bit 4: Bus Turnaround Time-Out Error Flag */
-#define USB_EINT_DMA (1 << 5) /* Bit 5: DMA Error Flag */
-#define USB_EINT_BMX (1 << 6) /* Bit 6: Bus Matrix Error Flag */
-#define USB_EINT_BTS (1 << 7) /* Bit 7: Bit Stuff Error Flag */
-
-/* USB Status FIFO Register */
-
-#define USB_STAT_PPBI (1 << 2) /* Bit 2: Ping-Pong BD Pointer Indicator */
-#define USB_STAT_DIR (1 << 3) /* Bit 3: Last BD Direction Indicator */
-#define USB_STAT_ENDPT_SHIFT (4) /* Bits 4-7: Encoded Endpoint Activity */
-#define USB_STAT_ENDPT_MASK (15 << USB_STAT_ENDPT_SHIFT)
-# define USB_STAT_ENDPT(n) ((n) << USB_STAT_ENDPT_SHIFT) /* Endpoint n, n=0..15 */
-
-/* USB Module Control Register */
-
-#define USB_CON_USBEN (1 << 0) /* Bit 0: USB Module Enable */
-#define USB_CON_SOFEN (1 << 0) /* Bit 0: SOF Enable */
-#define USB_CON_PPBRST (1 << 1) /* Bit 1: Ping-Pong Buffers Reset */
-#define USB_CON_RESUME (1 << 2) /* Bit 2: RESUME Signaling Enable */
-#define USB_CON_HOSTEN (1 << 3) /* Bit 3: Host Mode Enable */
-#define USB_CON_USBRST (1 << 4) /* Bit 4: Module Reset */
-#define USB_CON_PKTDIS (1 << 5) /* Bit 5: Packet Transfer Disable */
-#define USB_CON_TOKBUSY (1 << 5) /* Bit 5: Token Busy Indicator */
-#define USB_CON_SE0 (1 << 6) /* Bit 6: Live Single-Ended Zero flag */
-#define USB_CON_JSTATE (1 << 7) /* Bit 7: Live Differential Receiver JSTATE flag */
-
-/* USB Address Register */
-
-#define USB_ADDR_DEVADDR_SHIFT (0) /* Bit 0-6: 7-bit USB Device Address */
-#define USB_ADDR_DEVADDR_MASK (0x7f << USB_ADDR_DEVADDR_SHIFT)
-#define USB_ADDR_LSPDEN (1 << 7) /* Bit 7: Low Speed Enable Indicator */
-
-/* USB Frame Counter Register (high) */
-
-#define USB_FRMH_MASK 0x07 /* Bits 0-2: 11-bit frame number upper 3 bits */
-
-/* USB Frame Counter Register (low) */
-
-#define USB_FRML_MASK 0xff /* Bits 0-7: 11-bit frame number lower 8 bits */
-
-/* USB Host Control Register */
-
-#define USB_TOK_PID_SHIFT (4) /* Bits 4-7: Token Type Indicator */
-#define USB_TOK_PID_MASK (15 << USB_TOK_PID_SHIFT)
-# define USB_TOK_PID_OUT (1 << USB_TOK_PID_SHIFT) /* OUT (TX) token type transaction */
-# define USB_TOK_PID_IN (9 << USB_TOK_PID_SHIFT) /* IN (RX) token type transaction */
-# define USB_TOK_PID_SETUP (13 << USB_TOK_PID_SHIFT) /* SETUP (TX) token type transaction */
-#define USB_TOK_EP_SHIFT (0) /* Bits 0-3: Token Command Endpoint Address */
-#define USB_TOK_EP_MASK (15 << USB_TOK_EP_SHIFT)
-
-/* USB SOF Counter Register */
-
-#define USB_SOF_SHIFT (0) /* Bits 0-7: SOF Threshold Value */
-#define USB_SOF_MASK (0xff << USB_SOF_SHIFT)
-# define USB_SOF_8BTYE (0x12 << USB_SOF_SHIFT) /* 8-byte packet */
-# define USB_SOF_16BTYE (0x1a << USB_SOF_SHIFT) /* 16-byte packet */
-# define USB_SOF_32BTYE (0x2a << USB_SOF_SHIFT) /* 32-byte packet */
-# define USB_SOF_64BTYE (0x4a << USB_SOF_SHIFT) /* 64-byte packet */
-
-/* USB Buffer Descriptor Table Pointer Register 1 */
-
-#define USB_BDTP1_MASK 0x7e /* Bits 1-7: BDT Base Address bits 9-15 */
-
-/* USB Buffer Descriptor Table Pointer Register 2 */
-
-#define USB_BDTP2_MASK 0xff /* Bits 0-7: BDT Base Address bits 16-23 */
-
-/* USB Buffer Descriptor Table Pointer Register 3 */
-
-#define USB_BDTP3_MASK 0xff /* Bits 0-7: BDT Base Address bits 24-31 */
-
-/* USB Debug and Idle Register */
-
-#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7)
-# define USB_CNFG1_UASUSPND (1 << 0) /* Bit 0: Automatic Suspend Enable */
-#endif
-#define USB_CNFG1_USBSIDL (1 << 4) /* Bit 4: Stop in Idle Mode */
-#define USB_CNFG1_USBFRZ (1 << 5) /* Bit 5: Freeze in Debug Mode */
-#define USB_CNFG1_UOEMON (1 << 6) /* Bit 6: USB OE Monitor Enable */
-#define USB_CNFG1_UTEYE (1 << 7) /* Bit 7: USB Eye-Pattern Test Enable */
-
-/* USB Endpoint Control Register */
-
-#define USB_EP_EPHSHK (1 << 0) /* Bit 0: Endpoint Handshake Enable */
-#define USB_EP_EPSTALL (1 << 1) /* Bit 1: Endpoint Stall Status */
-#define USB_EP_EPRXEN (1 << 3) /* Bit 3: Endpoint Receive Enable */
-#define USB_EP_EPTXEN (1 << 2) /* Bit 2: Endpoint Transmit Enable */
-#define USB_EP_EPCONDIS (1 << 4) /* Bit 4: Bidirectional Endpoint Control */
-#define USB_EP_RETRYDIS (1 << 6) /* Bit 6: Retry Disable (Host mode and U1EP0 only) */
-#define USB_EP_LSPD (1 << 7) /* Bit 7: Low-Speed Direct Connection Enable */
-
-/************************************************************************************
- * Public Types
- ************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/************************************************************************************
- * Inline Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Function Prototypes
- ************************************************************************************/
-
-#ifdef __cplusplus
-#define EXTERN extern "C"
-extern "C" {
-#else
-#define EXTERN extern
-#endif
-
-#undef EXTERN
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H */
+/************************************************************************************ + * arch/mips/src/pic32mx/pic32mx-usbotg.h + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H +#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include "pic32mx-memorymap.h" + +/************************************************************************************ + * Pre-Processor Definitions + ************************************************************************************/ +/* Register Offsets *****************************************************************/ + +#define PIC32MX_USBOTG_IR_OFFSET 0x0040 /* USB OTG Interrupt Flags Register */ +#define PIC32MX_USBOTG_IE_OFFSET 0x0050 /* USB OTG Interrupt Enable Register */ +#define PIC32MX_USBOTG_STAT_OFFSET 0x0060 /* USB Comparator and Pin Status Register */ +#define PIC32MX_USBOTG_CON_OFFSET 0x0070 /* USB Resistor and Pin Control Register */ +#define PIC32MX_USB_PWRC_OFFSET 0x0080 /* USB Power Control Register */ +#define PIC32MX_USB_IR_OFFSET 0x0200 /* USB Pending Interrupt Register */ +#define PIC32MX_USB_IE_OFFSET 0x0210 /* USB Interrupt Enable Register */ +#define PIC32MX_USB_EIR_OFFSET 0x0220 /* USB Pending Error Interrupt Register */ +#define PIC32MX_USB_EIE_OFFSET 0x0230 /* USB Interrupt Error Enable Register */ +#define PIC32MX_USB_STAT_OFFSET 0x0240 /* USB Status FIFO Register */ +#define PIC32MX_USB_CON_OFFSET 0x0250 /* USB Module Control Register */ +#define PIC32MX_USB_ADDR_OFFSET 0x0260 /* USB Address Register */ +#define PIC32MX_USB_FRMH_OFFSET 0x0290 /* USB Frame Counter Register (high) */ +#define PIC32MX_USB_FRML_OFFSET 0x0280 /* USB Frame Counter Register (low) */ +#define PIC32MX_USB_TOK_OFFSET 0x02a0 /* USB Host Control Register */ +#define PIC32MX_USB_SOF_OFFSET 0x02b0 /* USB SOF Counter Register */ +#define PIC32MX_USB_BDTP1_OFFSET 0x0270 /* USB Buffer Descriptor Table Pointer Register 1 */ +#define PIC32MX_USB_BDTP2_OFFSET 0x02c0 /* USB Buffer Descriptor Table Pointer Register 2 */ +#define PIC32MX_USB_BDTP3_OFFSET 0x02d0 /* USB Buffer Descriptor Table Pointer Register 3 */ +#define PIC32MX_USB_CNFG1_OFFSET 0x02e0 /* USB Debug and Idle Register */ + +#define PIC32MX_USB_EP_OFFSET(n) (0x0300+((n)<<4)) +#define PIC32MX_USB_EP0_OFFSET 0x0300 /* USB Endpoint 0 Control Register */ +#define PIC32MX_USB_EP1_OFFSET 0x0310 /* USB Endpoint 1 Control Register */ +#define PIC32MX_USB_EP2_OFFSET 0x0320 /* USB Endpoint 2 Control Register */ +#define PIC32MX_USB_EP3_OFFSET 0x0330 /* USB Endpoint 3 Control Register */ +#define PIC32MX_USB_EP4_OFFSET 0x0340 /* USB Endpoint 4 Control Register */ +#define PIC32MX_USB_EP5_OFFSET 0x0350 /* USB Endpoint 5 Control Register */ +#define PIC32MX_USB_EP6_OFFSET 0x0360 /* USB Endpoint 6 Control Register */ +#define PIC32MX_USB_EP7_OFFSET 0x0370 /* USB Endpoint 7 Control Register */ +#define PIC32MX_USB_EP8_OFFSET 0x0380 /* USB Endpoint 8 Control Register */ +#define PIC32MX_USB_EP9_OFFSET 0x0390 /* USB Endpoint 9 Control Register */ +#define PIC32MX_USB_EP10_OFFSET 0x03a0 /* USB Endpoint 10 Control Register */ +#define PIC32MX_USB_EP11_OFFSET 0x03b0 /* USB Endpoint 11 Control Register */ +#define PIC32MX_USB_EP12_OFFSET 0x03c0 /* USB Endpoint 12 Control Register */ +#define PIC32MX_USB_EP13_OFFSET 0x03d0 /* USB Endpoint 13 Control Register */ +#define PIC32MX_USB_EP14_OFFSET 0x03e0 /* USB Endpoint 14 Control Register */ +#define PIC32MX_USB_EP15_OFFSET 0x03f0 /* USB Endpoint 15 Control Register */ + +/* Register Addresses ***************************************************************/ + +#define PIC32MX_USBOTG_IR (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IR_OFFSET) +#define PIC32MX_USBOTG_IE (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IE_OFFSET) +#define PIC32MX_USBOTG_STAT (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_STAT_OFFSET) +#define PIC32MX_USBOTG_CON (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_CON_OFFSET) +#define PIC32MX_USB_PWRC (PIC32MX_USB_K1BASE+PIC32MX_USB_PWRC_OFFSET) +#define PIC32MX_USB_IR (PIC32MX_USB_K1BASE+PIC32MX_USB_IR_OFFSET) +#define PIC32MX_USB_IE (PIC32MX_USB_K1BASE+PIC32MX_USB_IE_OFFSET) +#define PIC32MX_USB_EIR (PIC32MX_USB_K1BASE+PIC32MX_USB_EIR_OFFSET) +#define PIC32MX_USB_EIE (PIC32MX_USB_K1BASE+PIC32MX_USB_EIE_OFFSET) +#define PIC32MX_USB_STAT (PIC32MX_USB_K1BASE+PIC32MX_USB_STAT_OFFSET) +#define PIC32MX_USB_CON (PIC32MX_USB_K1BASE+PIC32MX_USB_CON_OFFSET) +#define PIC32MX_USB_ADDR (PIC32MX_USB_K1BASE+PIC32MX_USB_ADDR_OFFSET) +#define PIC32MX_USB_FRMH (PIC32MX_USB_K1BASE+PIC32MX_USB_FRMH_OFFSET) +#define PIC32MX_USB_FRML (PIC32MX_USB_K1BASE+PIC32MX_USB_FRML_OFFSET) +#define PIC32MX_USB_TOK (PIC32MX_USB_K1BASE+PIC32MX_USB_TOK_OFFSET) +#define PIC32MX_USB_SOF (PIC32MX_USB_K1BASE+PIC32MX_USB_SOF_OFFSET) +#define PIC32MX_USB_BDTP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP1_OFFSET) +#define PIC32MX_USB_BDTP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP2_OFFSET) +#define PIC32MX_USB_BDTP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP3_OFFSET) +#define PIC32MX_USB_CNFG1 (PIC32MX_USB_K1BASE+PIC32MX_USB_CNFG1_OFFSET) + +#define PIC32MX_USB_EP(n) (PIC32MX_USB_K1BASE+PIC32MX_USB_EP_OFFSET(n)) +#define PIC32MX_USB_EP0 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP0_OFFSET) +#define PIC32MX_USB_EP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP1_OFFSET) +#define PIC32MX_USB_EP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP2_OFFSET) +#define PIC32MX_USB_EP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP3_OFFSET) +#define PIC32MX_USB_EP4 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP4_OFFSET) +#define PIC32MX_USB_EP5 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP5_OFFSET) +#define PIC32MX_USB_EP6 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP6_OFFSET) +#define PIC32MX_USB_EP7 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP7_OFFSET) +#define PIC32MX_USB_EP8 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP8_OFFSET) +#define PIC32MX_USB_EP9 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP9_OFFSET) +#define PIC32MX_USB_EP10 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP10_OFFSET) +#define PIC32MX_USB_EP11 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP11_OFFSET) +#define PIC32MX_USB_EP12 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP12_OFFSET) +#define PIC32MX_USB_EP13 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP13_OFFSET) +#define PIC32MX_USB_EP14 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP14_OFFSET) +#define PIC32MX_USB_EP15 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP15_OFFSET) + +/* Register Bit-Field Definitions ***************************************************/ + +/* USB OTG Interrupt Flags Register */ +/* USB OTG Interrupt Enable Register */ + +#define USBOTG_INT_VBUSVD (1 << 0) /* Bit 0: A-Device VBUS Change Indicator */ +#define USBOTG_INT_SESEND (1 << 2) /* Bit 2: B-Device VBUS Change Indicator */ +#define USBOTG_INT_ACTV (1 << 4) /* Bit 4: Bus Activity Indicator */ +#define USBOTG_INT_SESVD (1 << 3) /* Bit 3: Session Valid Change Indicator */ +#define USBOTG_INT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */ +#define USBOTG_INT_T1MSEC (1 << 6) /* Bit 6: 1 Millisecond Timer */ +#define USBOTG_INT_ID (1 << 7) /* Bit 7: ID State Change Indicator */ + +/* USB Comparator and Pin Status Register */ + +#define USBOTG_STAT_VBUSVD (1 << 0) /* Bit 0: A-VBUS Valid Indicator */ +#define USBOTG_STAT_SESEND (1 << 2) /* Bit 2: B-Session End Indicator */ +#define USBOTG_STAT_SESVD (1 << 3) /* Bit 3: Session Valid Indicator */ +#define USBOTG_STAT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */ +#define USBOTG_STAT_ID (1 << 7) /* Bit 7: ID Pin State Indicator */ + +/* USB Resistor and Pin Control Register */ + +#define USBOTG_CON_VBUSDIS (1 << 0) /* Bit 0: VBUS Discharge Enable */ +#define USBOTG_CON_VBUSCHG (1 << 1) /* Bit 1: VBUS Charge Enable */ +#define USBOTG_CON_OTGEN (1 << 2) /* Bit 2: OTG Functionality Enable */ +#define USBOTG_CON_VBUSON (1 << 3) /* Bit 3: VBUS Power-on */ +#define USBOTG_CON_DMPULDWN (1 << 4) /* Bit 4: D- Pull-Down Enable */ +#define USBOTG_CON_DPPULDWN (1 << 5) /* Bit 5: D+ Pull-Down Enable */ +#define USBOTG_CON_DMPULUP (1 << 6) /* Bit 6: D- Pull-Up Enable */ +#define USBOTG_CON_DPPULUP (1 << 7) /* Bit 7: D+ Pull-Up Enable */ + +/* USB Power Control Register */ + +#define USB_PWRC_USBPWR (1 << 0) /* Bit 0: USB Operation Enable */ +#define USB_PWRC_USUSPEND (1 << 1) /* Bit 1: USB Suspend Mode */ +#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7) +# define USB_PWRC_USBBUSY (1 << 3) /* Bit 3: USB Module Busy */ +#endif +#define USB_PWRC_USLPGRD (1 << 4) /* Bit 4: USB Sleep Entry Guard */ +#define USB_PWRC_UACTPND (1 << 7) /* Bit 7: USB Activity Pending */ + +/* USB Pending Interrupt Register */ +/* USB Interrupt Enable Register */ + +#define USB_INT_URST (1 << 0) /* Bit 0: USB Reset Interrupt (Device mode) */ +#define USB_INT_DETACH (1 << 0) /* Bit 0: USB Detach Interrupt (Host mode) */ +#define USB_INT_UERR (1 << 1) /* Bit 1: USB Error Condition Interrupt */ +#define USB_INT_SOF (1 << 2) /* Bit 2: SOF Token Interrupt */ +#define USB_INT_TRN (1 << 3) /* Bit 3: Token Processing Complete Interrupt */ +#define USB_INT_IDLE (1 << 4) /* Bit 4 : Idle Detect Interrupt */ +#define USB_INT_RESUME (1 << 5) /* Bit 5: Resume Interrupt */ +#define USB_INT_ATTACH (1 << 6) /* Bit 6: Peripheral Attach Interrupt */ +#define USB_INT_STALL (1 << 7) /* Bit 7: STALL Handshake Interrupt */ + +#define USB_INT_ALL 0xff + +/* USB Pending Error Interrupt Register */ +/* USB Interrupt Error Enable Register */ + +#define USB_EINT_PID (1 << 0) /* Bit 0: PID Check Failure Flag */ +#define USB_EINT_CRC5 (1 << 1) /* Bit 1: CRC5 Host Error Flag */ +#define USB_EINT_EOF (1 << 1) /* Bit 1: EOF Error Flag */ +#define USB_EINT_CRC16 (1 << 2) /* Bit 2: CRC16 Failure Flag */ +#define USB_EINT_DFN8 (1 << 3) /* Bit 3: Data Field Size Error Flag */ +#define USB_EINT_BTO (1 << 4) /* Bit 4: Bus Turnaround Time-Out Error Flag */ +#define USB_EINT_DMA (1 << 5) /* Bit 5: DMA Error Flag */ +#define USB_EINT_BMX (1 << 6) /* Bit 6: Bus Matrix Error Flag */ +#define USB_EINT_BTS (1 << 7) /* Bit 7: Bit Stuff Error Flag */ + +#define USB_EINT_ALL 0xff + +/* USB Status FIFO Register */ + +#define USB_STAT_PPBI (1 << 2) /* Bit 2: Ping-Pong BD Pointer Indicator */ +#define USB_STAT_DIR (1 << 3) /* Bit 3: Last BD Direction Indicator */ +#define USB_STAT_ENDPT_SHIFT (4) /* Bits 4-7: Encoded Endpoint Activity */ +#define USB_STAT_ENDPT_MASK (15 << USB_STAT_ENDPT_SHIFT) +# define USB_STAT_ENDPT(n) ((n) << USB_STAT_ENDPT_SHIFT) /* Endpoint n, n=0..15 */ + +/* USB Module Control Register */ + +#define USB_CON_USBEN (1 << 0) /* Bit 0: USB Module Enable */ +#define USB_CON_SOFEN (1 << 0) /* Bit 0: SOF Enable */ +#define USB_CON_PPBRST (1 << 1) /* Bit 1: Ping-Pong Buffers Reset */ +#define USB_CON_RESUME (1 << 2) /* Bit 2: RESUME Signaling Enable */ +#define USB_CON_HOSTEN (1 << 3) /* Bit 3: Host Mode Enable */ +#define USB_CON_USBRST (1 << 4) /* Bit 4: Module Reset */ +#define USB_CON_PKTDIS (1 << 5) /* Bit 5: Packet Transfer Disable */ +#define USB_CON_TOKBUSY (1 << 5) /* Bit 5: Token Busy Indicator */ +#define USB_CON_SE0 (1 << 6) /* Bit 6: Live Single-Ended Zero flag */ +#define USB_CON_JSTATE (1 << 7) /* Bit 7: Live Differential Receiver JSTATE flag */ + +/* USB Address Register */ + +#define USB_ADDR_DEVADDR_SHIFT (0) /* Bit 0-6: 7-bit USB Device Address */ +#define USB_ADDR_DEVADDR_MASK (0x7f << USB_ADDR_DEVADDR_SHIFT) +#define USB_ADDR_LSPDEN (1 << 7) /* Bit 7: Low Speed Enable Indicator */ + +/* USB Frame Counter Register (high) */ + +#define USB_FRMH_MASK 0x07 /* Bits 0-2: 11-bit frame number upper 3 bits */ + +/* USB Frame Counter Register (low) */ + +#define USB_FRML_MASK 0xff /* Bits 0-7: 11-bit frame number lower 8 bits */ + +/* USB Host Control Register */ + +#define USB_TOK_PID_SHIFT (4) /* Bits 4-7: Token Type Indicator */ +#define USB_TOK_PID_MASK (15 << USB_TOK_PID_SHIFT) +# define USB_TOK_PID_OUT (1 << USB_TOK_PID_SHIFT) /* OUT (TX) token type transaction */ +# define USB_TOK_PID_IN (9 << USB_TOK_PID_SHIFT) /* IN (RX) token type transaction */ +# define USB_TOK_PID_SETUP (13 << USB_TOK_PID_SHIFT) /* SETUP (TX) token type transaction */ +#define USB_TOK_EP_SHIFT (0) /* Bits 0-3: Token Command Endpoint Address */ +#define USB_TOK_EP_MASK (15 << USB_TOK_EP_SHIFT) + +/* USB SOF Counter Register */ + +#define USB_SOF_SHIFT (0) /* Bits 0-7: SOF Threshold Value */ +#define USB_SOF_MASK (0xff << USB_SOF_SHIFT) +# define USB_SOF_8BTYE (0x12 << USB_SOF_SHIFT) /* 8-byte packet */ +# define USB_SOF_16BTYE (0x1a << USB_SOF_SHIFT) /* 16-byte packet */ +# define USB_SOF_32BTYE (0x2a << USB_SOF_SHIFT) /* 32-byte packet */ +# define USB_SOF_64BTYE (0x4a << USB_SOF_SHIFT) /* 64-byte packet */ + +/* USB Buffer Descriptor Table Pointer Register 1 */ + +#define USB_BDTP1_MASK 0x7e /* Bits 1-7: BDT Base Address bits 9-15 */ + +/* USB Buffer Descriptor Table Pointer Register 2 */ + +#define USB_BDTP2_MASK 0xff /* Bits 0-7: BDT Base Address bits 16-23 */ + +/* USB Buffer Descriptor Table Pointer Register 3 */ + +#define USB_BDTP3_MASK 0xff /* Bits 0-7: BDT Base Address bits 24-31 */ + +/* USB Debug and Idle Register */ + +#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7) +# define USB_CNFG1_UASUSPND (1 << 0) /* Bit 0: Automatic Suspend Enable */ +#endif +#define USB_CNFG1_USBSIDL (1 << 4) /* Bit 4: Stop in Idle Mode */ +#define USB_CNFG1_USBFRZ (1 << 5) /* Bit 5: Freeze in Debug Mode */ +#define USB_CNFG1_UOEMON (1 << 6) /* Bit 6: USB OE Monitor Enable */ +#define USB_CNFG1_UTEYE (1 << 7) /* Bit 7: USB Eye-Pattern Test Enable */ + +/* USB Endpoint Control Register */ + +#define USB_EP_EPHSHK (1 << 0) /* Bit 0: Endpoint Handshake Enable */ +#define USB_EP_EPSTALL (1 << 1) /* Bit 1: Endpoint Stall Status */ +#define USB_EP_EPTXEN (1 << 2) /* Bit 2: Endpoint Transmit Enable */ +#define USB_EP_EPRXEN (1 << 3) /* Bit 3: Endpoint Receive Enable */ +#define USB_EP_EPCONDIS (1 << 4) /* Bit 4: Bidirectional Endpoint Control */ +#define USB_EP_RETRYDIS (1 << 6) /* Bit 6: Retry Disable (Host mode and U1EP0 only) */ +#define USB_EP_LSPD (1 << 7) /* Bit 7: Low-Speed Direct Connection Enable */ + +/* Buffer Descriptor Table (BDT) ****************************************************/ +/* Offset 0: On write (software->hardware) */ + +#define USB_BDT_BSTALL (1 << 2) /* Bit 2: Buffer Stall Enable bit */ +#define USB_BDT_DTS (1 << 3) /* Bit 3: Data Toggle Synchronization Enable bit */ +#define USB_BDT_NINC (1 << 4) /* Bit 4: DMA Address Increment Disable bit */ +#define USB_BDT_KEEP (1 << 5) /* Bit 5: BD Keep Enable bit */ +#define USB_BDT_DATA01 (1 << 6) /* Bit 6: Data Toggle Packet bit */ +#define USB_BDT_UOWN (1 << 7) /* Bit 7: USB Own bit */ +#define USB_BDT_BYTECOUNT_SHIFT (16) /* Bits 16-25: Byte Count bits */ +#define USB_BDT_BYTECOUNT_MASK (0x3ff << USB_BDT_BYTECOUNT_SHIFT) + +#define USB_BDT_DATA0 0 /* DATA0 packet expected next */ +#define USB_BDT_DATA1 USB_BDT_DATA01 /* DATA1 packet expected next */ +#define USB_BDT_COWN 0 /* CPU owns the descriptor */ + +/* Offset 0: On read (hardware->software) */ + +#define USB_BDT_PID_SHIFT (2) /* Bits 2-5: Packet Identifier bits */ +#define USB_BDT_PID_MASK (15 << USB_BDT_BYTECOUNT_SHIFT) + /* Bit 7: USB Own bit (same) */ + /* Bits 16-25: Byte Count bits (same) */ + +/* Offset 4: BUFFER_ADDRESS, 32-bit Buffer Address bits */ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/* Buffer Descriptor Status Register layout. */ + +struct usbotg_bdtentry_s +{ + uint32_t status; /* Status, byte count, and PID */ + uint8_t *addr; /* Buffer address */ +}; + +/************************************************************************************ + * Inline Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ + +#ifdef __cplusplus +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +#undef EXTERN +#ifdef __cplusplus +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H */ diff --git a/nuttx/configs/sure-pic32mx/src/Makefile b/nuttx/configs/sure-pic32mx/src/Makefile index 0a5849d97..fa8dc47cf 100644 --- a/nuttx/configs/sure-pic32mx/src/Makefile +++ b/nuttx/configs/sure-pic32mx/src/Makefile @@ -48,6 +48,10 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y) CSRCS += up_buttons.c endif +ifeq ($(CONFIG_PIC32MX_USBDEV),y) +CSRCS += up_usbdev.c +endif + ifeq ($(CONFIG_NSH_ARCHINIT),y) CSRCS += up_nsh.c endif diff --git a/nuttx/configs/sure-pic32mx/src/sure-internal.h b/nuttx/configs/sure-pic32mx/src/sure-internal.h index 3a3cebbe4..826c05efa 100644 --- a/nuttx/configs/sure-pic32mx/src/sure-internal.h +++ b/nuttx/configs/sure-pic32mx/src/sure-internal.h @@ -2,7 +2,7 @@ * configs/sure-pic32mx/src/sure-internal.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -81,7 +81,7 @@ extern "C" { * Name: pic32mx_spiinitialize * * Description: - * Called to configure SPI chip select GPIO pins for the PCB Logic board. + * Called to configure SPI chip select GPIO pins for the Sure PIC32MX Logic board. * ************************************************************************************/ @@ -90,6 +90,18 @@ EXTERN void weak_function pic32mx_spiinitialize(void); #endif /************************************************************************************ + * Name: pic32mx_usdbinitialize + * + * Description: + * Called to configure the mini-B PHY on the Sure PIC32MX board for the USB device + * + ************************************************************************************/ + +#if defined(CONFIG_PIC32MX_USBDEV) +EXTERN void weak_function pic32mx_usdbinitialize(void); +#endif + +/************************************************************************************ * Name: pic32mx_ledinit * * Description: diff --git a/nuttx/configs/sure-pic32mx/src/up_boot.c b/nuttx/configs/sure-pic32mx/src/up_boot.c index f3cf49052..fe633abd4 100644 --- a/nuttx/configs/sure-pic32mx/src/up_boot.c +++ b/nuttx/configs/sure-pic32mx/src/up_boot.c @@ -85,6 +85,15 @@ void pic32mx_boardinitialize(void) } #endif + /* Configure the mini-B PHY on the Sure PIC32MX board for the USB device */ + +#if defined(CONFIG_PIC32MX_USBDEV) + if (pic32mx_usbdevinitialize) + { + pic32mx_usbdevinitialize(); + } +#endif + /* Configure on-board LEDs if LED support has been selected. */ #ifdef CONFIG_ARCH_LEDS diff --git a/nuttx/configs/sure-pic32mx/src/up_spi.c b/nuttx/configs/sure-pic32mx/src/up_spi.c index 5d03dcb2a..67ce64dec 100644 --- a/nuttx/configs/sure-pic32mx/src/up_spi.c +++ b/nuttx/configs/sure-pic32mx/src/up_spi.c @@ -1,9 +1,9 @@ /************************************************************************************ - * configs/sure-pic32mx/src/up_ssp.c - * arch/arm/src/board/up_ssp.c + * configs/sure-pic32mx/src/up_spi.c + * arch/arm/src/board/up_spi.c * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -65,16 +65,16 @@ */ #ifdef CONFIG_SPI_DEBUG -# define sspdbg lldbg +# define spidbg lldbg # ifdef CONFIG_SPI_VERBOSE -# define sspvdbg lldbg +# define spivdbg lldbg # else -# define sspvdbg(x...) +# define spivdbg(x...) # endif #else # undef CONFIG_SPI_VERBOSE -# define sspdbg(x...) -# define sspvdbg(x...) +# define spidbg(x...) +# define spivdbg(x...) #endif /************************************************************************************ @@ -86,14 +86,14 @@ ************************************************************************************/ /************************************************************************************ - * Name: pic32mx_sspinitialize + * Name: pic32mx_spiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the Sure PIC32MX board. * ************************************************************************************/ -void weak_function pic32mx_sspinitialize(void) +void weak_function pic32mx_spiinitialize(void) { /* Configure the SPI2 chip select GPIOs */ @@ -130,13 +130,13 @@ void weak_function pic32mx_sspinitialize(void) #ifdef CONFIG_PIC32MX_SPI2 void pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { - sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); #warning "Missing logic" } uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { - sspdbg("Returning nothing\n"); + spidbg("Returning nothing\n"); #warning "Missing logic" return 0; } diff --git a/nuttx/tools/configure.sh b/nuttx/tools/configure.sh index a13e288be..84a9acb43 100755 --- a/nuttx/tools/configure.sh +++ b/nuttx/tools/configure.sh @@ -165,4 +165,10 @@ if [ ! -z "${appdir}" ]; then echo "CONFIG_APPS_DIR=\"$appdir\"" >> "${TOPDIR}/.configX" fi fi + +# install the final .configX only if it differs from the existing +# .config file. + install -C "${TOPDIR}/.configX" "${TOPDIR}/.config" +rm -f "${TOPDIR}/.configX" + |