diff options
-rw-r--r-- | apps/nshlib/Kconfig | 493 | ||||
-rw-r--r-- | apps/nshlib/nsh.h | 8 | ||||
-rw-r--r-- | apps/nshlib/nsh_netinit.c | 20 | ||||
-rw-r--r-- | nuttx/configs/sama5d4-ek/nsh/defconfig | 51 | ||||
-rw-r--r-- | nuttx/configs/viewtool-stm32f107/netnsh/defconfig | 296 |
5 files changed, 555 insertions, 313 deletions
diff --git a/apps/nshlib/Kconfig b/apps/nshlib/Kconfig index 7f35243fb..f710969f5 100644 --- a/apps/nshlib/Kconfig +++ b/apps/nshlib/Kconfig @@ -12,6 +12,8 @@ config NSH_LIBRARY if NSH_LIBRARY +menu "Command Line Configuration" + choice prompt "Command Line Editor" default NSH_READLINE if DEFAULT_SMALL @@ -38,6 +40,98 @@ config NSH_CLE endchoice +config NSH_LINELEN + int "Max command line length" + default 64 if DEFAULT_SMALL + default 80 if !DEFAULT_SMALL + ---help--- + The maximum length of one command line and of one output line. + Default: 64/80 + +config NSH_DISABLE_SEMICOLON + bool "Disable multiple commands per line" + default y if DEFAULT_SMALL + default n if !DEFAULT_SMALL + ---help--- + By default, you can enter multiple NSH commands on a line with each + command separated by a semicolon. You can disable this feature to + save a little memory on FLASH challenged platforms. + +config NSH_CMDPARMS + bool "Enable commands as parameters" + default n if DEFAULT_SMALL + default y if !DEFAULT_SMALL + depends on !DISABLE_MOUNTPOINT + ---help--- + If selected, then the output from commands, from file applications, and + from NSH built-in commands can be used as arguments to other + commands. The entity to be executed is identified by enclosing the + command line in back quotes. For example, + + set FOO `myprogram $BAR` + + Will execute the program named myprogram passing it the value of the + environment variable BAR. The value of the environment variable FOO + is then set output of myprogram on stdout. + + Because this feature commits significant resources, it is disabled by + default. + +config NSH_TMPDIR + string "Temporary file directory" + default "/tmp" + depends on NSH_CMDPARMS + ---help--- + If NSH_CMDPARMS is selected, then function output will be retained + in a temporary file. In that case, this string must be provided to + specify the full path to a directory where temporary files can be + created. This would be a good application of RAM disk: To provide + temporary storage for function output. + +config NSH_MAXARGUMENTS + int "Maximum number of command arguments" + default 6 + ---help--- + The maximum number of NSH command arguments. + Default: 6 + +config NSH_ARGCAT + bool "Concatenation of argument strings" + default n if DEFAULT_SMALL + default y if !DEFAULT_SMALL + ---help--- + Support concatenation of strings with environment variables or command + output. For example: + + set FOO XYZ + set BAR 123 + set FOOBAR ABC_${FOO}_${BAR} + + would set the environment variable FOO to XYZ, BAR to 123 and FOOBAR + to ABC_XYZ_123. If NSH_ARGCAT is not selected, then a slightly small + FLASH footprint results but then also only simple environment + variables like $FOO can be used on the command line. + +config NSH_NESTDEPTH + int "Maximum command nesting" + default 3 + ---help--- + The maximum number of nested if-then[-else]-fi sequences that + are permissable. Default: 3 + +config NSH_DISABLEBG + bool "Disable background commands" + default y if DEFAULT_SMALL + default n if !DEFAULT_SMALL + ---help--- + This can be set to 'y' to suppress support for background + commands. This setting disables the 'nice' command prefix and + the '&' command suffix. This would only be set on systems + where a minimal footprint is a necessity and background command + execution is not. + +endmenu # Command Line Configuration + config NSH_BUILTIN_APPS bool "Enable built-in applications" default n @@ -326,84 +420,7 @@ config NSH_STRERROR This setting depends upon the strerror() having been enabled with LIBC_STRERROR. -config NSH_LINELEN - int "Max command line length" - default 64 if DEFAULT_SMALL - default 80 if !DEFAULT_SMALL - ---help--- - The maximum length of one command line and of one output line. - Default: 64/80 - -config NSH_DISABLE_SEMICOLON - bool "Disable multiple commands per line" - default y if DEFAULT_SMALL - default n if !DEFAULT_SMALL - ---help--- - By default, you can enter multiple NSH commands on a line with each - command separated by a semicolon. You can disable this feature to - save a little memory on FLASH challenged platforms. - -config NSH_CMDPARMS - bool "Enable commands as parameters" - default n if DEFAULT_SMALL - default y if !DEFAULT_SMALL - depends on !DISABLE_MOUNTPOINT - ---help--- - If selected, then the output from commands, from file applications, and - from NSH built-in commands can be used as arguments to other - commands. The entity to be executed is identified by enclosing the - command line in back quotes. For example, - - set FOO `myprogram $BAR` - - Will execute the program named myprogram passing it the value of the - environment variable BAR. The value of the environment variable FOO - is then set output of myprogram on stdout. - - Because this feature commits significant resources, it is disabled by - default. - -config NSH_TMPDIR - string "Temporary file directory" - default "/tmp" - depends on NSH_CMDPARMS - ---help--- - If NSH_CMDPARMS is selected, then function output will be retained - in a temporary file. In that case, this string must be provided to - specify the full path to a directory where temporary files can be - created. This would be a good application of RAM disk: To provide - temporary storage for function output. - -config NSH_MAXARGUMENTS - int "Maximum number of command arguments" - default 6 - ---help--- - The maximum number of NSH command arguments. - Default: 6 - -config NSH_ARGCAT - bool "Concatenation of argument strings" - default n if DEFAULT_SMALL - default y if !DEFAULT_SMALL - ---help--- - Support concatenation of strings with environment variables or command - output. For example: - - set FOO XYZ - set BAR 123 - set FOOBAR ABC_${FOO}_${BAR} - - would set the environment variable FOO to XYZ, BAR to 123 and FOOBAR - to ABC_XYZ_123. If NSH_ARGCAT is not selected, then a slightly small - FLASH footprint results but then also only simple environment - variables like $FOO can be used on the command line. - -config NSH_NESTDEPTH - int "Maximum command nesting" - default 3 - ---help--- - The maximum number of nested if-then[-else]-fi sequences that - are permissable. Default: 3 +menu "Scripting Support" config NSH_DISABLESCRIPT bool "Disable script support" @@ -438,17 +455,6 @@ config NSH_DISABLE_LOOPS endif # !NSH_DISABLESCRIPT -config NSH_DISABLEBG - bool "Disable background commands" - default y if DEFAULT_SMALL - default n if !DEFAULT_SMALL - ---help--- - This can be set to 'y' to suppress support for background - commands. This setting disables the 'nice' command prefix and - the '&' command suffix. This would only be set on systems - where a minimal footprint is a necessity and background command - execution is not. - config NSH_MMCSDMINOR int "MMC/SD minor device number" default 0 @@ -468,8 +474,6 @@ config NSH_ROMFSETC at /etc/init.d/rcS. The default startup script will mount a FAT FS RAMDISK at /tmp but the logic is easily extensible. -endif # NSH_LIBRARY - if NSH_ROMFSETC config NSH_ROMFSRC @@ -572,8 +576,9 @@ config NSH_FATMOUNTPT FS will be mounted. Default is "/tmp". endif # NSH_ROMFSETC +endmenu # Scripting Support -if NSH_LIBRARY +menu "Console Configuration" config NSH_CONSOLE bool "Use console" @@ -626,6 +631,63 @@ config USBDEV_MINOR endif # NSH_USBCONSOLE +config NSH_ALTCONDEV + bool "Alternative console device" + default n + depends on NSH_CONSOLE && !NSH_USBCONSOLE && !NSH_TELNET + ---help--- + If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may + also be selected to enable use of an alternate character device + to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected, + then NSH_CONDEV must be set to select the serial device used to + support the NSH console. This may be useful, for example, to + separate the NSH command line from the system console when the + system console is used to provide debug output. Default: stdin + and stdout (probably "/dev/console") + + NOTE 1: When any other device other than /dev/console is used + for a user interface, (1) linefeeds (\n) will not be expanded to + carriage return / linefeeds (\r\n). You will need to set + your terminal program to account for this. And (2) input is + not automatically echoed so you will have to turn local echo on. + + NOTE 2: This option forces the console of all sessions to use + NSH_CONDEV. Hence, this option only makes sense for a system + that supports only a single session. This option is, in + particular, incompatible with Telnet sessions because each Telnet + session must use a different console device. + +if NSH_ALTCONDEV + +config NSH_CONDEV + string "Alternative console device name" + default "/dev/console" + ---help--- + If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may + also be selected to enable use of an alternate character device + to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected, + then NSH_CONDEV must be set to select the serial device used to + support the NSH console. This should be set to the quoted name + of a readable/write-able character driver such as: + NSH_CONDEV="/dev/ttyS1". This is useful, for example, to separate + the NSH command line from the system console when the system console + is used to provide debug output. Default: stdin and stdout + (probably "/dev/console") + + NOTE 1: When any other device other than /dev/console is used + for a user interface, (1) linefeeds (\n) will not be expanded to + carriage return / linefeeds (\r\n). You will need to set + your terminal program to account for this. And (2) input is + not automatically echoed so you will have to turn local echo on. + + NOTE 2: This option forces the console of all sessions to use + NSH_CONDEV. Hence, this option only makes sense for a system + that supports only a single session. This option is, in + particular, incompatible with Telnet sessions because each Telnet + session must use a different console device. + +endif # NSH_ALTCONDEV + config NSH_USBKBD bool "Use USB keyboard input" default n @@ -650,13 +712,14 @@ config NSH_USBKBD_DEVNAME able keyboard driver. Default: "/dev/kbda". endif #NSH_USBKBD +endmenu # Console Configuration -comment "USB Trace Support" +menu "USB Device Trace Support" + depends on USBDEV && (DEBUG || USBDEV_TRACE) config NSH_USBDEV_TRACE bool "Enable Builtin USB Trace Support" default n - depends on USBDEV && (DEBUG || USBDEV_TRACE) ---help--- Enable builtin USB trace support in NSH. If selected, buffered USB trace data will be presented each time a command is provided to NSH. @@ -700,72 +763,132 @@ config NSH_USBDEV_TRACEINTERRUPTS Show interrupt-related events endif # NSH_USBDEV_TRACE +endmenu # USB Device Trace Support -config NSH_ALTCONDEV - bool "Alternative console device" +config NSH_ARCHINIT + bool "Have architecture-specific initialization" default n - depends on NSH_CONSOLE && !NSH_USBCONSOLE && !NSH_TELNET ---help--- - If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may - also be selected to enable use of an alternate character device - to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected, - then NSH_CONDEV must be set to select the serial device used to - support the NSH console. This may be useful, for example, to - separate the NSH command line from the system console when the - system console is used to provide debug output. Default: stdin - and stdout (probably "/dev/console") + Set if your board provides architecture specific initialization + via the board-specific function nsh_archinitialize(). This + function will be called early in NSH initialization to allow + board logic to do such things as configure MMC/SD slots. - NOTE 1: When any other device other than /dev/console is used - for a user interface, (1) linefeeds (\n) will not be expanded to - carriage return / linefeeds (\r\n). You will need to set - your terminal program to account for this. And (2) input is - not automatically echoed so you will have to turn local echo on. +menu "Networking Configuration" + depends on NET - NOTE 2: This option forces the console of all sessions to use - NSH_CONDEV. Hence, this option only makes sense for a system - that supports only a single session. This option is, in - particular, incompatible with Telnet sessions because each Telnet - session must use a different console device. +config NSH_DHCPC + bool "Use DHCP to get IP address" + default n + depends on NSH_LIBRARY && NETUTILS_DHCPC + ---help--- + Obtain the IP address via DHCP. -if NSH_ALTCONDEV + Per RFC2131 (p. 9), the DHCP client must be prepared to receive DHCP + messages of up to 576 bytes (excluding Ethernet, IP, or UDP headers and FCS). -config NSH_CONDEV - string "Alternative console device name" - default "/dev/console" +config NSH_IPADDR + hex "Target IP address" + default 0x0a000002 + depends on NSH_LIBRARY && NET && !NSH_DHCPC ---help--- - If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may - also be selected to enable use of an alternate character device - to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected, - then NSH_CONDEV must be set to select the serial device used to - support the NSH console. This should be set to the quoted name - of a readable/write-able character driver such as: - NSH_CONDEV="/dev/ttyS1". This is useful, for example, to separate - the NSH command line from the system console when the system console - is used to provide debug output. Default: stdin and stdout - (probably "/dev/console") + If NSH_DHCPC is NOT set, then the static IP address must be provided. + This is a 32-bit integer value in host order. So, as an example, + 0x10000002 would be 10.0.0.2. - NOTE 1: When any other device other than /dev/console is used - for a user interface, (1) linefeeds (\n) will not be expanded to - carriage return / linefeeds (\r\n). You will need to set - your terminal program to account for this. And (2) input is - not automatically echoed so you will have to turn local echo on. +config NSH_DRIPADDR + hex "Router IP address" + default 0x0a000001 + depends on NSH_LIBRARY && NET + ---help--- + Default router IP address (aka, Gateway). This is a 32-bit integer + value in host order. So, as an example, 0x10000001 would be 10.0.0.1. - NOTE 2: This option forces the console of all sessions to use - NSH_CONDEV. Hence, this option only makes sense for a system - that supports only a single session. This option is, in - particular, incompatible with Telnet sessions because each Telnet - session must use a different console device. +config NSH_NETMASK + hex "Network mask" + default 0xffffff00 + depends on NSH_LIBRARY && NET + ---help--- + Network mask. This is a 32-bit integer value in host order. So, as + an example, 0xffffff00 would be 255.255.255.0. -endif # NSH_ALTCONDEV +config NSH_DNS + bool "Use DNS" + default n + depends on NSH_LIBRARY && NETUTILS_DNSCLIENT + ---help--- + Configure to use a DNS. -config NSH_ARCHINIT - bool "Have architecture-specific initialization" +config NSH_DNSIPADDR + hex "DNS IP address" + default 0xa0000001 + depends on NSH_DNS + ---help--- + Configure the DNS address. This is a 32-bit integer value in host + order. So, as an example, 0xa0000001 would be 10.0.0.1. + +config NSH_NOMAC + bool "Hardware has no MAC address" default n + depends on NSH_LIBRARY && NET ---help--- - Set if your board provides architecture specific initialization - via the board-specific function nsh_archinitialize(). This - function will be called early in NSH initialization to allow - board logic to do such things as configure MMC/SD slots. + Set if your Ethernet hardware has no built-in MAC address. + If set, a bogus MAC will be assigned. + +if NSH_NOMAC + +choice + prompt "MAC address selection" + default NSH_SWMAC + ---help--- + If the hardware as no MAC address, then NSH must assign an address + to the hardware before it brings the network up. This choice allows + you select the source of that MAC address. + +config NSH_SWMAC + bool "Fixed address" + ---help--- + With this choice, you can assign a fixed MAC address determined by + a NuttX configuration option. + +config NSH_ARCHMAC + bool "Platform-specific" + ---help--- + This selection will enable a call to an interface exported by + platform-specific code to determine the MAC address. If this option + is selected, the the platform-specific code must provide the + function nsh_arch_macaddress() that will be called by the NSH + initialize logic to obtain the MAC address. + + This option might be useful, as an example, if MAC addresses are + retained in Serial FLASH. Such address might be assigned during the + manufacturing process so that each board has a unique MAC address. + +endchoice # MAC address selection + +config NSH_MACADDR + hex "Fixed MAC address" + default 0x00e0deadbeef + depends on NSH_SWMAC + ---help--- + If the hardware has no built-in MAC address and if the NSH_SWMAC + option is selected, then the fixed, software-assigned MAC address + MAC address must provided with this selection. + +endif # NSH_NOMAC + +config NSH_MAX_ROUNDTRIP + int "Max Ping Round-Trip (DSEC)" + default 20 + depends on NSH_LIBRARY && NET && !NSH_DISABLE_PING + ---help--- + This is the maximum round trip for a response to a ICMP ECHO request. + It is in units of deciseconds. The default is 20 (2 seconds). + +endmenu # Networking Configuration" + +menu "Telnet Configuration" + depends on NETUTILS_TELNETD config NSH_TELNET bool "Use Telnet console" @@ -778,8 +901,6 @@ config NSH_TELNET you may log into NuttX remotely using telnet in order to access NSH. -endif # NSH_LIBRARY - if NSH_TELNET config NSH_TELNETD_PORT @@ -849,77 +970,5 @@ config NSH_TELNET_FAILCOUNT endif # NSH_TELNET_LOGIN endif # NSH_TELNET - -config NSH_DHCPC - bool "Use DHCP to get IP address" - default n - depends on NSH_LIBRARY && NETUTILS_DHCPC - ---help--- - Obtain the IP address via DHCP. - - Per RFC2131 (p. 9), the DHCP client must be prepared to receive DHCP - messages of up to 576 bytes (excluding Ethernet, IP, or UDP headers and FCS). - -config NSH_IPADDR - hex "Target IP address" - default 0x0a000002 - depends on NSH_LIBRARY && NET && !NSH_DHCPC - ---help--- - If NSH_DHCPC is NOT set, then the static IP address must be provided. - This is a 32-bit integer value in host order. So, as an example, - 0x10000002 would be 10.0.0.2. - -config NSH_DRIPADDR - hex "Router IP address" - default 0x0a000001 - depends on NSH_LIBRARY && NET - ---help--- - Default router IP address (aka, Gateway). This is a 32-bit integer - value in host order. So, as an example, 0x10000001 would be 10.0.0.1. - -config NSH_NETMASK - hex "Network mask" - default 0xffffff00 - depends on NSH_LIBRARY && NET - ---help--- - Network mask. This is a 32-bit integer value in host order. So, as - an example, 0xffffff00 would be 255.255.255.0. - -config NSH_DNS - bool "Use DNS" - default n - depends on NSH_LIBRARY && NETUTILS_DNSCLIENT - ---help--- - Configure to use a DNS. - -config NSH_DNSIPADDR - hex "DNS IP address" - default 0xa0000001 - depends on NSH_DNS - ---help--- - Configure the DNS address. This is a 32-bit integer value in host - order. So, as an example, 0xa0000001 would be 10.0.0.1. - -config NSH_NOMAC - bool "Hardware has no MAC address" - default n - depends on NSH_LIBRARY && NET - ---help--- - Set if your ethernet hardware has no built-in MAC address. - If set, a bogus MAC will be assigned. - -config NSH_MACADDR - hex "Software assigned MAC address" - default 0x00e0deadbeef - depends on NSH_NOMAC - ---help--- - Use this option to specific the software-assigned MAC address - to be used, in case the hardware has no built-in MAC address. - -config NSH_MAX_ROUNDTRIP - int "Max Ping Round-Trip (DSEC)" - default 20 - depends on NSH_LIBRARY && NET && !NSH_DISABLE_PING - ---help--- - This is the maximum round trip for a response to a ICMP ECHO request. - It is in units of deciseconds. The default is 20 (2 seconds). +endmenu # Telnet Configuration +endif # NSH_LIBRARY diff --git a/apps/nshlib/nsh.h b/apps/nshlib/nsh.h index 4b33f4452..1b76c19af 100644 --- a/apps/nshlib/nsh.h +++ b/apps/nshlib/nsh.h @@ -126,6 +126,10 @@ # define CONFIG_NSH_MACADDR 0x00e0deadbeef #endif +#ifndef CONFIG_NET +# undef CONFIG_NSH_ARCHMAC +#endif + /* Telnetd requires networking support */ #ifndef CONFIG_NET @@ -694,6 +698,10 @@ int nsh_archinitialize(void); # define nsh_archinitialize() (-ENOSYS) #endif +#ifdef CONFIG_NSH_ARCHMAC +int nsh_arch_macaddress(uint8_t *mac); +#endif + /* Basic session and message handling */ struct console_stdio_s; diff --git a/apps/nshlib/nsh_netinit.c b/apps/nshlib/nsh_netinit.c index d3340a0fc..c4e83d7e6 100644 --- a/apps/nshlib/nsh_netinit.c +++ b/apps/nshlib/nsh_netinit.c @@ -108,23 +108,35 @@ int nsh_netinit(void) { - struct in_addr addr; + struct in_addr addr; #if defined(CONFIG_NSH_DHCPC) - FAR void *handle; + FAR void *handle; #endif #if (defined(CONFIG_NSH_DHCPC) || defined(CONFIG_NSH_NOMAC)) && !defined(CONFIG_NET_SLIP) - uint8_t mac[IFHWADDRLEN]; + uint8_t mac[IFHWADDRLEN]; #endif -/* Many embedded network interfaces must have a software assigned MAC */ + /* Many embedded network interfaces must have a software assigned MAC */ #if defined(CONFIG_NSH_NOMAC) && !defined(CONFIG_NET_SLIP) +#ifdef CONFIG_NSH_ARCHMAC + /* Let platform-specific logic assign the MAC address. */ + + (void)nsh_arch_macaddress(mac); + +#else + /* Use the configured, fixed MAC address */ + mac[0] = (CONFIG_NSH_MACADDR >> (8 * 5)) & 0xff; mac[1] = (CONFIG_NSH_MACADDR >> (8 * 4)) & 0xff; mac[2] = (CONFIG_NSH_MACADDR >> (8 * 3)) & 0xff; mac[3] = (CONFIG_NSH_MACADDR >> (8 * 2)) & 0xff; mac[4] = (CONFIG_NSH_MACADDR >> (8 * 1)) & 0xff; mac[5] = (CONFIG_NSH_MACADDR >> (8 * 0)) & 0xff; +#endif + + /* Set the MAC address */ + netlib_setmacaddr(NET_DEVNAME, mac); #endif diff --git a/nuttx/configs/sama5d4-ek/nsh/defconfig b/nuttx/configs/sama5d4-ek/nsh/defconfig index 0e503c67c..f5d9bdaae 100644 --- a/nuttx/configs/sama5d4-ek/nsh/defconfig +++ b/nuttx/configs/sama5d4-ek/nsh/defconfig @@ -1168,8 +1168,20 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)" # NSH Library # CONFIG_NSH_LIBRARY=y + +# +# Command Line Configuration +# CONFIG_NSH_READLINE=y # CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=80 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_TMPDIR="/tmp" +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set CONFIG_NSH_BUILTIN_APPS=y # @@ -1226,17 +1238,13 @@ CONFIG_NSH_CODECS_BUFSIZE=128 # CONFIG_NSH_CMDOPT_HEXDUMP is not set CONFIG_NSH_PROC_MOUNTPOUNT="/proc" CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_LINELEN=80 -# CONFIG_NSH_DISABLE_SEMICOLON is not set -CONFIG_NSH_CMDPARMS=y -CONFIG_NSH_TMPDIR="/tmp" -CONFIG_NSH_MAXARGUMENTS=6 -CONFIG_NSH_ARGCAT=y -CONFIG_NSH_NESTDEPTH=3 + +# +# Scripting Support +# # CONFIG_NSH_DISABLESCRIPT is not set # CONFIG_NSH_DISABLE_ITEF is not set # CONFIG_NSH_DISABLE_LOOPS is not set -# CONFIG_NSH_DISABLEBG is not set CONFIG_NSH_ROMFSETC=y # CONFIG_NSH_ROMFSRC is not set CONFIG_NSH_ROMFSMOUNTPT="/etc" @@ -1248,13 +1256,30 @@ CONFIG_NSH_FATDEVNO=1 CONFIG_NSH_FATSECTSIZE=512 CONFIG_NSH_FATNSECTORS=1024 CONFIG_NSH_FATMOUNTPT="/tmp" + +# +# Console Configuration +# CONFIG_NSH_CONSOLE=y # CONFIG_NSH_USBKBD is not set +CONFIG_NSH_ARCHINIT=y # -# USB Trace Support +# Networking Configuration +# +CONFIG_NSH_IPADDR=0x0a000002 +CONFIG_NSH_DRIPADDR=0x0a000001 +CONFIG_NSH_NETMASK=0xffffff00 +# CONFIG_NSH_DNS is not set +CONFIG_NSH_NOMAC=y +CONFIG_NSH_SWMAC=y +# CONFIG_NSH_ARCHMAC is not set +CONFIG_NSH_MACADDR=0x00e0deadbeef +CONFIG_NSH_MAX_ROUNDTRIP=20 + +# +# Telnet Configuration # -CONFIG_NSH_ARCHINIT=y CONFIG_NSH_TELNET=y CONFIG_NSH_TELNETD_PORT=23 CONFIG_NSH_TELNETD_DAEMONPRIO=100 @@ -1263,12 +1288,6 @@ CONFIG_NSH_TELNETD_CLIENTPRIO=100 CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048 CONFIG_NSH_IOBUFFER_SIZE=512 # CONFIG_NSH_TELNET_LOGIN is not set -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -# CONFIG_NSH_DNS is not set -CONFIG_NSH_NOMAC=y -CONFIG_NSH_MAX_ROUNDTRIP=20 # # NxWidgets/NxWM diff --git a/nuttx/configs/viewtool-stm32f107/netnsh/defconfig b/nuttx/configs/viewtool-stm32f107/netnsh/defconfig index 5906252a0..aaec86b69 100644 --- a/nuttx/configs/viewtool-stm32f107/netnsh/defconfig +++ b/nuttx/configs/viewtool-stm32f107/netnsh/defconfig @@ -30,6 +30,7 @@ CONFIG_WINDOWS_CYGWIN=y CONFIG_INTELHEX_BINARY=y # CONFIG_MOTOROLA_SREC is not set # CONFIG_RAW_BINARY is not set +# CONFIG_UBOOT_UIMAGE is not set # # Customize Header Files @@ -79,6 +80,7 @@ CONFIG_ARCH="arm" # CONFIG_ARCH_CHIP_KINETIS is not set # CONFIG_ARCH_CHIP_KL is not set # CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set # CONFIG_ARCH_CHIP_LPC17XX is not set # CONFIG_ARCH_CHIP_LPC214X is not set # CONFIG_ARCH_CHIP_LPC2378 is not set @@ -142,6 +144,7 @@ CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y # CONFIG_ARCH_CHIP_STM32L152V6 is not set # CONFIG_ARCH_CHIP_STM32L152V8 is not set # CONFIG_ARCH_CHIP_STM32L152VB is not set +# CONFIG_ARCH_CHIP_STM32L162ZD is not set # CONFIG_ARCH_CHIP_STM32F100C8 is not set # CONFIG_ARCH_CHIP_STM32F100CB is not set # CONFIG_ARCH_CHIP_STM32F100R8 is not set @@ -154,16 +157,18 @@ CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y # CONFIG_ARCH_CHIP_STM32F100VC is not set # CONFIG_ARCH_CHIP_STM32F100VD is not set # CONFIG_ARCH_CHIP_STM32F100VE is not set -# CONFIG_ARCH_CHIP_STM32F103C4 is not set -# CONFIG_ARCH_CHIP_STM32F103C8 is not set # CONFIG_ARCH_CHIP_STM32F103T8 is not set # CONFIG_ARCH_CHIP_STM32F103TB is not set +# CONFIG_ARCH_CHIP_STM32F103C4 is not set +# CONFIG_ARCH_CHIP_STM32F103C8 is not set # CONFIG_ARCH_CHIP_STM32F103CB is not set # CONFIG_ARCH_CHIP_STM32F103R8 is not set # CONFIG_ARCH_CHIP_STM32F103RB is not set +# CONFIG_ARCH_CHIP_STM32F103RC is not set +# CONFIG_ARCH_CHIP_STM32F103RD is not set +# CONFIG_ARCH_CHIP_STM32F103RE is not set # CONFIG_ARCH_CHIP_STM32F103V8 is not set # CONFIG_ARCH_CHIP_STM32F103VB is not set -# CONFIG_ARCH_CHIP_STM32F103RE is not set # CONFIG_ARCH_CHIP_STM32F103VC is not set # CONFIG_ARCH_CHIP_STM32F103VE is not set # CONFIG_ARCH_CHIP_STM32F103ZE is not set @@ -183,6 +188,7 @@ CONFIG_ARCH_CHIP_STM32F107VC=y # CONFIG_ARCH_CHIP_STM32F303RC is not set # CONFIG_ARCH_CHIP_STM32F303VB is not set # CONFIG_ARCH_CHIP_STM32F303VC is not set +# CONFIG_ARCH_CHIP_STM32F401RE is not set # CONFIG_ARCH_CHIP_STM32F405RG is not set # CONFIG_ARCH_CHIP_STM32F405VG is not set # CONFIG_ARCH_CHIP_STM32F405ZG is not set @@ -210,20 +216,55 @@ CONFIG_STM32_CONNECTIVITYLINE=y # CONFIG_STM32_MEDIUMDENSITY is not set # CONFIG_STM32_LOWDENSITY is not set # CONFIG_STM32_STM32F20XX is not set +# CONFIG_STM32_STM32F207 is not set # CONFIG_STM32_STM32F30XX is not set # CONFIG_STM32_STM32F40XX is not set +# CONFIG_STM32_STM32F401 is not set +# CONFIG_STM32_STM32F405 is not set +# CONFIG_STM32_STM32F407 is not set +# CONFIG_STM32_STM32F427 is not set +# CONFIG_STM32_STM32F429 is not set # CONFIG_STM32_DFU is not set # # STM32 Peripheral Support # +# CONFIG_STM32_HAVE_CCM is not set # CONFIG_STM32_HAVE_USBDEV is not set CONFIG_STM32_HAVE_OTGFS=y +# CONFIG_STM32_HAVE_FSMC is not set +CONFIG_STM32_HAVE_USART3=y +CONFIG_STM32_HAVE_USART4=y +CONFIG_STM32_HAVE_USART5=y +# CONFIG_STM32_HAVE_USART6 is not set +# CONFIG_STM32_HAVE_USART7 is not set +# CONFIG_STM32_HAVE_USART8 is not set +CONFIG_STM32_HAVE_TIM1=y +CONFIG_STM32_HAVE_TIM5=y +CONFIG_STM32_HAVE_TIM6=y +CONFIG_STM32_HAVE_TIM7=y +CONFIG_STM32_HAVE_TIM8=y +# CONFIG_STM32_HAVE_TIM9 is not set +# CONFIG_STM32_HAVE_TIM10 is not set +# CONFIG_STM32_HAVE_TIM11 is not set +# CONFIG_STM32_HAVE_TIM12 is not set +# CONFIG_STM32_HAVE_TIM13 is not set +# CONFIG_STM32_HAVE_TIM14 is not set +# CONFIG_STM32_HAVE_TIM15 is not set +# CONFIG_STM32_HAVE_TIM16 is not set +# CONFIG_STM32_HAVE_TIM17 is not set +CONFIG_STM32_HAVE_ADC2=y +# CONFIG_STM32_HAVE_ADC3 is not set +# CONFIG_STM32_HAVE_ADC4 is not set +CONFIG_STM32_HAVE_CAN1=y +CONFIG_STM32_HAVE_CAN2=y +# CONFIG_STM32_HAVE_RNG is not set +CONFIG_STM32_HAVE_ETHMAC=y # CONFIG_STM32_ADC1 is not set # CONFIG_STM32_ADC2 is not set -# CONFIG_STM32_ADC3 is not set # CONFIG_STM32_BKP is not set # CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set # CONFIG_STM32_CRC is not set # CONFIG_STM32_DMA1 is not set # CONFIG_STM32_DMA2 is not set @@ -307,11 +348,13 @@ CONFIG_STM32_RMII_EXTCLK=y # CONFIG_ARCH_VECNOTIRQ is not set # CONFIG_ARCH_DMA is not set CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set # CONFIG_CUSTOM_STACK is not set # CONFIG_ADDRENV is not set CONFIG_ARCH_HAVE_VFORK=y # CONFIG_ARCH_HAVE_MMU is not set # CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set # CONFIG_ARCH_IRQPRIO is not set CONFIG_ARCH_STACKDUMP=y # CONFIG_ENDIAN_BIG is not set @@ -376,36 +419,70 @@ CONFIG_NSH_MMCSDMINOR=0 # # RTOS Features # -# CONFIG_BOARD_INITIALIZE is not set +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# CONFIG_MSEC_PER_TICK=10 # CONFIG_SYSTEM_TIME64 is not set -CONFIG_RR_INTERVAL=200 -# CONFIG_SCHED_CPULOAD is not set -# CONFIG_SCHED_INSTRUMENTATION is not set -CONFIG_TASK_NAME_SIZE=0 -# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_CLOCK_MONOTONIC is not set # CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2009 CONFIG_START_MONTH=9 CONFIG_START_DAY=21 -CONFIG_DEV_CONSOLE=y +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=16 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +CONFIG_TASK_NAME_SIZE=0 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_SCHED_WAITPID is not set + +# +# Pthread Options +# # CONFIG_MUTEX_TYPES is not set -# CONFIG_PRIORITY_INHERITANCE is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y # CONFIG_FDCLONE_DISABLE is not set # CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -# CONFIG_SCHED_WAITPID is not set +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set # CONFIG_SCHED_STARTHOOK is not set # CONFIG_SCHED_ATEXIT is not set # CONFIG_SCHED_ONEXIT is not set -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DISABLE_OS_API=y -# CONFIG_DISABLE_CLOCK is not set -# CONFIG_DISABLE_POSIX_TIMERS is not set -# CONFIG_DISABLE_PTHREAD is not set -# CONFIG_DISABLE_SIGNALS is not set -# CONFIG_DISABLE_MQUEUE is not set -# CONFIG_DISABLE_ENVIRON is not set # # Signal Numbers @@ -417,19 +494,10 @@ CONFIG_SIG_SIGCONDTIMEDOUT=16 CONFIG_SIG_SIGWORK=17 # -# Sizes of configurable things (0 disables) +# POSIX Message Queue Options # -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=16 -CONFIG_PREALLOC_TIMERS=4 # # Stack and heap information @@ -446,6 +514,12 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048 CONFIG_DEV_NULL=y # CONFIG_DEV_ZERO is not set # CONFIG_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set # CONFIG_RAMDISK is not set # CONFIG_CAN is not set # CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set @@ -456,6 +530,7 @@ CONFIG_ARCH_HAVE_I2CRESET=y # CONFIG_I2S is not set # CONFIG_RTC is not set # CONFIG_WATCHDOG is not set +# CONFIG_TIMER is not set # CONFIG_ANALOG is not set # CONFIG_AUDIO_DEVICES is not set # CONFIG_VIDEO_DEVICES is not set @@ -488,6 +563,7 @@ CONFIG_NETDEVICES=y # CONFIG_ETH0_PHY_AM79C874 is not set # CONFIG_ETH0_PHY_KS8721 is not set # CONFIG_ETH0_PHY_KSZ8051 is not set +# CONFIG_ETH0_PHY_KSZ8081 is not set # CONFIG_ETH0_PHY_KSZ90x1 is not set CONFIG_ETH0_PHY_DP83848C=y # CONFIG_ETH0_PHY_LAN8720 is not set @@ -567,17 +643,33 @@ CONFIG_NET=y # CONFIG_NET_NOINTS is not set CONFIG_NET_MULTIBUFFER=y # CONFIG_NET_PROMISCUOUS is not set +CONFIG_NET_BUFSIZE=650 +CONFIG_NET_RECEIVE_WINDOW=624 +CONFIG_NET_GUARDSIZE=2 + +# +# Socket Support +# CONFIG_NSOCKET_DESCRIPTORS=10 CONFIG_NET_NACTIVESOCKETS=16 CONFIG_NET_SOCKOPTS=y # CONFIG_NET_SOLINGER is not set -CONFIG_NET_BUFSIZE=650 -# CONFIG_NET_TCPURGDATA is not set + +# +# Network Device Operations +# +# CONFIG_NETDEV_PHY_IOCTL is not set + +# +# Raw Socket Support +# +# CONFIG_NET_PKT is not set # # TCP/IP Networking # CONFIG_NET_TCP=y +# CONFIG_NET_TCPURGDATA is not set CONFIG_NET_TCP_CONNS=40 CONFIG_NET_MAX_LISTENPORTS=40 CONFIG_NET_TCP_READAHEAD=y @@ -595,20 +687,48 @@ CONFIG_NET_UDP=y CONFIG_NET_UDP_CONNS=8 CONFIG_NET_BROADCAST=y # CONFIG_NET_RXAVAIL is not set + +# +# ICMP Networking Support +# CONFIG_NET_ICMP=y CONFIG_NET_ICMP_PING=y # CONFIG_NET_PINGADDRCONF is not set + +# +# IGMPv2 Client Support +# # CONFIG_NET_IGMP is not set -# CONFIG_NET_STATISTICS is not set -CONFIG_NET_RECEIVE_WINDOW=624 + +# +# ARP Configuration +# +CONFIG_NET_ARP=y CONFIG_NET_ARPTAB_SIZE=16 +CONFIG_NET_ARP_MAXAGE=120 # CONFIG_NET_ARP_IPIN is not set + +# +# Network I/O Buffer Support +# CONFIG_NET_IOB=y CONFIG_IOB_NBUFFERS=24 CONFIG_IOB_BUFSIZE=196 CONFIG_IOB_NCHAINS=8 -CONFIG_IOB_THROTTLE=0 +# CONFIG_NET_ARCH_INCR32 is not set +# CONFIG_NET_ARCH_CHKSUM is not set +# CONFIG_NET_STATISTICS is not set + +# +# Routing Table Configuration +# # CONFIG_NET_ROUTE is not set +CONFIG_NET_ETHERNET=y + +# +# Crypto API +# +# CONFIG_CRYPTO is not set # # File Systems @@ -618,6 +738,7 @@ CONFIG_IOB_THROTTLE=0 # File system configuration # # CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set # CONFIG_FS_READABLE is not set # CONFIG_FS_WRITABLE is not set @@ -728,6 +849,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024 # CONFIG_EXAMPLES_BUTTONS is not set # CONFIG_EXAMPLES_CAN is not set # CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CPUHOG is not set # CONFIG_EXAMPLES_DHCPD is not set # CONFIG_EXAMPLES_ELF is not set # CONFIG_EXAMPLES_FTPC is not set @@ -738,7 +860,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024 # CONFIG_EXAMPLES_HIDKBD is not set # CONFIG_EXAMPLES_KEYPADTEST is not set # CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_LCDRW is not set # CONFIG_EXAMPLES_MM is not set # CONFIG_EXAMPLES_MODBUS is not set # CONFIG_EXAMPLES_MOUNT is not set @@ -755,13 +876,14 @@ CONFIG_EXAMPLES_NSH=y # CONFIG_EXAMPLES_NXLINES is not set # CONFIG_EXAMPLES_NXTEXT is not set # CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PASHELLO is not set # CONFIG_EXAMPLES_PIPE is not set # CONFIG_EXAMPLES_POSIXSPAWN is not set # CONFIG_EXAMPLES_QENCODER is not set # CONFIG_EXAMPLES_RGMP is not set # CONFIG_EXAMPLES_ROMFS is not set # CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set # CONFIG_EXAMPLES_SERLOOP is not set # CONFIG_EXAMPLES_SLCD is not set # CONFIG_EXAMPLES_SMART_TEST is not set @@ -814,6 +936,7 @@ CONFIG_NETUTILS_NETLIB=y CONFIG_NETUTILS_WEBCLIENT=y CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)" # CONFIG_NETUTILS_WEBSERVER is not set +# CONFIG_NETUTILS_NTPCLIENT is not set # CONFIG_NETUTILS_DISCOVER is not set # CONFIG_NETUTILS_XMLRPC is not set @@ -826,8 +949,19 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)" # NSH Library # CONFIG_NSH_LIBRARY=y + +# +# Command Line Configuration +# CONFIG_NSH_READLINE=y # CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=80 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set CONFIG_NSH_BUILTIN_APPS=y # @@ -882,23 +1016,37 @@ CONFIG_NSH_BUILTIN_APPS=y CONFIG_NSH_CODECS_BUFSIZE=128 # CONFIG_NSH_CMDOPT_HEXDUMP is not set CONFIG_NSH_FILEIOSIZE=1024 -CONFIG_NSH_LINELEN=80 -# CONFIG_NSH_DISABLE_SEMICOLON is not set -# CONFIG_NSH_CMDPARMS is not set -CONFIG_NSH_MAXARGUMENTS=6 -# CONFIG_NSH_ARGCAT is not set -CONFIG_NSH_NESTDEPTH=3 + +# +# Scripting Support +# # CONFIG_NSH_DISABLESCRIPT is not set # CONFIG_NSH_DISABLE_ITEF is not set # CONFIG_NSH_DISABLE_LOOPS is not set -# CONFIG_NSH_DISABLEBG is not set -CONFIG_NSH_CONSOLE=y # -# USB Trace Support +# Console Configuration # -# CONFIG_NSH_ALTCONDEV is not set +CONFIG_NSH_CONSOLE=y # CONFIG_NSH_ARCHINIT is not set + +# +# Networking Configuration +# +# CONFIG_NSH_DHCPC is not set +CONFIG_NSH_IPADDR=0x0a000002 +CONFIG_NSH_DRIPADDR=0x0a000001 +CONFIG_NSH_NETMASK=0xffffff00 +# CONFIG_NSH_DNS is not set +CONFIG_NSH_NOMAC=y +CONFIG_NSH_SWMAC=y +# CONFIG_NSH_ARCHMAC is not set +CONFIG_NSH_MACADDR=0x00e0deadbeef +CONFIG_NSH_MAX_ROUNDTRIP=20 + +# +# Telnet Configuration +# CONFIG_NSH_TELNET=y CONFIG_NSH_TELNETD_PORT=23 CONFIG_NSH_TELNETD_DAEMONPRIO=100 @@ -907,13 +1055,6 @@ CONFIG_NSH_TELNETD_CLIENTPRIO=100 CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048 CONFIG_NSH_IOBUFFER_SIZE=512 # CONFIG_NSH_TELNET_LOGIN is not set -# CONFIG_NSH_DHCPC is not set -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -# CONFIG_NSH_DNS is not set -CONFIG_NSH_NOMAC=y -CONFIG_NSH_MAX_ROUNDTRIP=20 # # NxWidgets/NxWM @@ -929,35 +1070,37 @@ CONFIG_NSH_MAX_ROUNDTRIP=20 # # -# USB CDC/ACM Device Commands +# Custom Free Memory Command # +# CONFIG_SYSTEM_FREE is not set # -# USB Composite Device Commands +# EMACS-like Command Line Editor # +# CONFIG_SYSTEM_CLE is not set # -# Custom Free Memory Command +# FLASH Program Installation # -# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_INSTALL is not set # -# I2C tool +# FLASH Erase-all Command # # -# INI File Parser +# Intel HEX to binary conversion # -# CONFIG_SYSTEM_INIFILE is not set +# CONFIG_SYSTEM_HEX2BIN is not set # -# FLASH Program Installation +# I2C tool # -# CONFIG_SYSTEM_INSTALL is not set # -# FLASH Erase-all Command +# INI File Parser # +# CONFIG_SYSTEM_INIFILE is not set # # NxPlayer media player library / command Line @@ -976,6 +1119,14 @@ CONFIG_SYSTEM_READLINE=y CONFIG_READLINE_ECHO=y # +# P-Code Support +# + +# +# PHY Tool +# + +# # Power Off # # CONFIG_SYSTEM_POWEROFF is not set @@ -996,21 +1147,20 @@ CONFIG_READLINE_ECHO=y # CONFIG_SYSTEM_SYSINFO is not set # -# USB Monitor +# VI Work-Alike Editor # +# CONFIG_SYSTEM_VI is not set # -# EMACS-like Command Line Editor +# Stack Monitor # -# CONFIG_SYSTEM_CLE is not set # -# VI Work-Alike Editor +# USB CDC/ACM Device Commands # -# CONFIG_SYSTEM_VI is not set # -# Stack Monitor +# USB Composite Device Commands # # @@ -1018,6 +1168,10 @@ CONFIG_READLINE_ECHO=y # # +# USB Monitor +# + +# # Zmodem Commands # # CONFIG_SYSTEM_ZMODEM is not set |