diff options
| -rw-r--r-- | nuttx/ChangeLog | 5 | ||||
| -rw-r--r-- | nuttx/configs/sam3u-ek/README.txt | 66 | ||||
| -rw-r--r-- | nuttx/configs/sam3u-ek/nxwm/Make.defs | 109 | ||||
| -rw-r--r-- | nuttx/configs/sam3u-ek/nxwm/defconfig | 998 | ||||
| -rwxr-xr-x | nuttx/configs/sam3u-ek/nxwm/setenv.sh | 74 |
5 files changed, 1247 insertions, 5 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index b213057e9..63265a205 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -5087,4 +5087,9 @@ SRAM to be functional (2013-6-28). * arch/arm/src/sam34/sam3u_gpio.c: Need to disable write protection before configuring PIO pins. + * configs/sam3u-ek/nsh: The touchscreen is now function. The above + fix to the sam3u_gpio.c write protection also fixed the touchscreen + problem (2013-6-28). + * confgis/sam3u_ek/nxwm: Created a configuration for the NxWM + window manager for the SAM3U-EK board. diff --git a/nuttx/configs/sam3u-ek/README.txt b/nuttx/configs/sam3u-ek/README.txt index cf01f744d..d49b2a645 100644 --- a/nuttx/configs/sam3u-ek/README.txt +++ b/nuttx/configs/sam3u-ek/README.txt @@ -583,6 +583,7 @@ Configuration sub-directories CONFIG_ADS7843E_SPIDEV=2 : Use SPI CS 2 for communication CONFIG_ADS7843E_SPIMODE=0 : Use SPI mode 0 CONFIG_ADS7843E_FREQUENCY=1000000 : SPI BAUD 1MHz + CONFIG_ADS7843E_SWAPXY=y : If landscpe orientation CONFIG_ADS7843E_THRESHX=51 : These will probably need to be tuned CONFIG_ADS7843E_THRESHY=39 @@ -611,16 +612,71 @@ Configuration sub-directories CONFIG_DEBUG_INPUT=y : Enable debug output from input devices STATUS: - 2013-6-16: The touchscreen is not functional. It seems to - perform good measurements but I am not getting the /PENIRQ - interrupt. The interrupt is set up correctly (I can ground - A24 and I get the interrupt), so apparently the ADS7843E is - not generating interrupts. No idea why. + 2013-6-28: The touchscreen is functional. nx: Configures to use examples/nx using the HX834x LCD hardware on the SAM3U-EK development board. + nxwm + ---- + This is a special configuration setup for the NxWM window manager + UnitTest. The NxWM window manager can be found here: + + nuttx-code/NxWidgets/nxwm + + The NxWM unit test can be found at: + + nuttx-code/NxWidgets/UnitTests/nxwm + + Documentation for installing the NxWM unit test can be found here: + + nuttx-code/NxWidgets/UnitTests/README.txt + + Here is the quick summary of the build steps (Assuming that all of + the required packages are available in a directory ~/nuttx-code): + + 1. Intall the nxwm configuration + + $ cd ~/nuttx-code/nuttx/tools + $ ./configure.sh stm3240g-eval/nxwm + + 2. Make the build context (only) + + $ cd .. + $ . ./setenv.sh + $ make context + ... + + 3. Install the nxwm unit test + + $ cd ~/nuttx-code/NxWidgets + $ tools/install.sh ~/nuttx-code/apps nxwm + Creating symbolic link + - To ~/nuttx-code/NxWidgets/UnitTests/nxwm + - At ~/nuttx-code/apps/external + + 4. Build the NxWidgets library + + $ cd ~/nuttx-code/NxWidgets/libnxwidgets + $ make TOPDIR=~/nuttx-code/nuttx + ... + + 5. Build the NxWM library + + $ cd ~/nuttx-code/NxWidgets/nxwm + $ make TOPDIR=~/nuttx-code/nuttx + ... + + 6. Built NuttX with the installed unit test as the application + + $ cd ~/nuttx-code/nuttx + $ make + + STATUS: + 2013-6-28: Created the configuration but have not yet done + anything with it. + ostest: This configuration directory, performs a simple OS test using examples/ostest. By default, this project assumes that you are diff --git a/nuttx/configs/sam3u-ek/nxwm/Make.defs b/nuttx/configs/sam3u-ek/nxwm/Make.defs new file mode 100644 index 000000000..7f471fd59 --- /dev/null +++ b/nuttx/configs/sam3u-ek/nxwm/Make.defs @@ -0,0 +1,109 @@ +############################################################################ +# configs/sam3u-ek/nxwm/Make.defs +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" + MAXOPTIMIZATION = -O2 +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/nuttx/configs/sam3u-ek/nxwm/defconfig b/nuttx/configs/sam3u-ek/nxwm/defconfig new file mode 100644 index 000000000..aed970cec --- /dev/null +++ b/nuttx/configs/sam3u-ek/nxwm/defconfig @@ -0,0 +1,998 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG=y +CONFIG_DEBUG_VERBOSE=y + +# +# Subsystem Debug Options +# +# CONFIG_DEBUG_MM is not set +# CONFIG_DEBUG_SCHED is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_LIB is not set +# CONFIG_DEBUG_BINFMT is not set +# CONFIG_DEBUG_GRAPHICS is not set + +# +# Driver Debug Options +# +# CONFIG_DEBUG_LCD is not set +# CONFIG_DEBUG_LEDS is not set +CONFIG_DEBUG_INPUT=y +# CONFIG_DEBUG_ANALOG is not set +# CONFIG_DEBUG_SPI is not set +# CONFIG_DEBUG_GPIO is not set +# CONFIG_DEBUG_AUDIO is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +CONFIG_ARCH_CHIP_SAM34=y +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="sam34" +# CONFIG_ARMV7M_USEBASEPRI is not set +# CONFIG_ARCH_HAVE_FPU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set +# CONFIG_DEBUG_HARDFAULT is not set + +# +# ARMV7M Configuration Options +# +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set +CONFIG_ARMV7M_OABI_TOOLCHAIN=y +CONFIG_GPIO_IRQ=y + +# +# AT91SAM3/4 Configuration Options +# +CONFIG_ARCH_CHIP_ATSAM3U4E=y +# CONFIG_ARCH_CHIP_ATSAM3X8E is not set +# CONFIG_ARCH_CHIP_ATSAM3X8C is not set +# CONFIG_ARCH_CHIP_ATSAM3X4E is not set +# CONFIG_ARCH_CHIP_ATSAM3X4C is not set +# CONFIG_ARCH_CHIP_ATSAM3A8C is not set +# CONFIG_ARCH_CHIP_ATSAM3A4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S16C is not set +# CONFIG_ARCH_CHIP_ATSAM4S16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S8C is not set +# CONFIG_ARCH_CHIP_ATSAM4S8B is not set +CONFIG_ARCH_CHIP_SAM3U=y +# CONFIG_ARCH_CHIP_SAM3X is not set +# CONFIG_ARCH_CHIP_SAM3A is not set +# CONFIG_ARCH_CHIP_SAM4L is not set +# CONFIG_ARCH_CHIP_SAM4S is not set + +# +# AT91SAM3/4 Peripheral Support +# +CONFIG_SAM34_SPI0=y +# CONFIG_SAM34_SSC is not set +# CONFIG_SAM34_TC0 is not set +# CONFIG_SAM34_TC1 is not set +# CONFIG_SAM34_TC2 is not set +# CONFIG_SAM34_PWM is not set +# CONFIG_SAM34_TWIM0 is not set +# CONFIG_SAM34_TWIS0 is not set +# CONFIG_SAM34_TWIM1 is not set +# CONFIG_SAM34_TWIS1 is not set +CONFIG_SAM34_UART0=y +# CONFIG_SAM34_USART0 is not set +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set +# CONFIG_SAM34_ADC12B is not set +# CONFIG_SAM34_ADC is not set +# CONFIG_SAM34_SMC is not set +# CONFIG_SAM34_NAND is not set +# CONFIG_SAM34_DMA is not set +# CONFIG_SAM34_UDPHS is not set +# CONFIG_SAM34_UOTGHS is not set +# CONFIG_SAM34_RTC is not set +# CONFIG_SAM34_RTT is not set +# CONFIG_SAM34_WDT is not set +# CONFIG_SAM34_HSMCI is not set + +# +# AT91SAM3/4 USART Configuration +# + +# +# AT91SAM3/4 GPIO Interrupt Configuration +# +CONFIG_GPIOA_IRQ=y +# CONFIG_GPIOB_IRQ is not set +# CONFIG_GPIOC_IRQ is not set + +# +# External Memory Configuration +# +CONFIG_ARCH_HAVE_EXTNAND=y +CONFIG_ARCH_HAVE_EXTNOR=y +CONFIG_ARCH_HAVE_EXTSRAM0=y +CONFIG_ARCH_HAVE_EXTSRAM1=y +# CONFIG_ARCH_EXTNAND is not set +# CONFIG_ARCH_EXTNOR is not set +# CONFIG_ARCH_EXTSRAM0 is not set +# CONFIG_ARCH_EXTSRAM1 is not set + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +# CONFIG_ARCH_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=8720 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_SAM3UEK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sam3u-ek" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2013 +CONFIG_START_MONTH=6 +CONFIG_START_DAY=28 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WAITPID=y +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +CONFIG_SCHED_ONEXIT=y +CONFIG_SCHED_ONEXIT_MAX=1 +CONFIG_USER_ENTRYPOINT="nxwm_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 +CONFIG_SIG_SIGWORK=17 + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=12 +CONFIG_NFILE_STREAMS=12 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=32 +CONFIG_MQ_MAXMSGSIZE=48 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1024 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=1024 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +CONFIG_SPI_OWNBUS=y +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +CONFIG_INPUT=y +# CONFIG_INPUT_TSC2007 is not set +CONFIG_INPUT_ADS7843E=y +# CONFIG_ADS7843E_MULTIPLE is not set +CONFIG_ADS7843E_SPIDEV=2 +CONFIG_ADS7843E_DEVMINOR=0 +CONFIG_ADS7843E_SPIMODE=0 +CONFIG_ADS7843E_FREQUENCY=100000 +CONFIG_ADS7843E_SWAPXY=y +CONFIG_ADS7843E_THRESHX=51 +CONFIG_ADS7843E_THRESHY=39 +# CONFIG_INPUT_STMPE811 is not set +CONFIG_LCD=y + +# +# Common LCD Settings +# +# CONFIG_LCD_NOGETRUN is not set +CONFIG_LCD_MAXCONTRAST=1 +CONFIG_LCD_MAXPOWER=31 + +# +# Graphic LCD Devices +# +# CONFIG_LCD_P14201 is not set +# CONFIG_LCD_NOKIA6100 is not set +# CONFIG_LCD_MIO283QT2 is not set +# CONFIG_LCD_UG9664HSWAG01 is not set +# CONFIG_LCD_UG2864HSWEG01 is not set +# CONFIG_LCD_UG2832HSWEG04 is not set +# CONFIG_LCD_ST7567 is not set +# CONFIG_LCD_UG2864AMBAG01 is not set +# CONFIG_LCD_SSD1289 is not set +CONFIG_LCD_LANDSCAPE=y +# CONFIG_LCD_PORTRAIT is not set +# CONFIG_LCD_RPORTRAIT is not set +# CONFIG_LCD_RLANDSCAPE is not set + +# +# Alphanumeric/Segment LCD Devices +# +# CONFIG_LCD_LCD1602 is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_TIOCSERGSTRUCT is not set +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +CONFIG_NX=y +CONFIG_NX_LCDDRIVER=y +CONFIG_NX_NPLANES=1 +CONFIG_NX_WRITEONLY=y + +# +# Supported Pixel Depths +# +CONFIG_NX_DISABLE_1BPP=y +CONFIG_NX_DISABLE_2BPP=y +CONFIG_NX_DISABLE_4BPP=y +CONFIG_NX_DISABLE_8BPP=y +# CONFIG_NX_DISABLE_16BPP is not set +CONFIG_NX_DISABLE_24BPP=y +CONFIG_NX_DISABLE_32BPP=y +CONFIG_NX_PACKEDMSFIRST=y + +# +# Input Devices +# +CONFIG_NX_MOUSE=y +CONFIG_NX_KBD=y + +# +# Framed Window Borders +# +CONFIG_NXTK_BORDERWIDTH=4 +CONFIG_NXTK_DEFAULT_BORDERCOLORS=y +# CONFIG_NXTK_AUTORAISE is not set + +# +# Font Selections +# +CONFIG_NXFONTS_CHARBITS=7 +# CONFIG_NXFONT_MONO5X8 is not set +# CONFIG_NXFONT_SANS17X22 is not set +# CONFIG_NXFONT_SANS20X26 is not set +CONFIG_NXFONT_SANS23X27=y +# CONFIG_NXFONT_SANS22X29 is not set +# CONFIG_NXFONT_SANS28X37 is not set +# CONFIG_NXFONT_SANS39X48 is not set +# CONFIG_NXFONT_SANS17X23B is not set +# CONFIG_NXFONT_SANS20X27B is not set +CONFIG_NXFONT_SANS22X29B=y +# CONFIG_NXFONT_SANS28X37B is not set +# CONFIG_NXFONT_SANS40X49B is not set +# CONFIG_NXFONT_SERIF22X29 is not set +# CONFIG_NXFONT_SERIF29X37 is not set +# CONFIG_NXFONT_SERIF38X48 is not set +# CONFIG_NXFONT_SERIF22X28B is not set +# CONFIG_NXFONT_SERIF27X38B is not set +# CONFIG_NXFONT_SERIF38X49B is not set +CONFIG_NXCONSOLE=y + +# +# NxConsole Output Text/Graphics Options +# +CONFIG_NXCONSOLE_BPP=16 +CONFIG_NXCONSOLE_CURSORCHAR=137 +CONFIG_NXCONSOLE_MXCHARS=325 +CONFIG_NXCONSOLE_CACHESIZE=32 +CONFIG_NXCONSOLE_LINESEPARATION=0 +# CONFIG_NXCONSOLE_NOWRAP is not set + +# +# NxConsole Input options +# +CONFIG_NXCONSOLE_NXKBDIN=y +CONFIG_NXCONSOLE_KBDBUFSIZE=16 +CONFIG_NXCONSOLE_NPOLLWAITERS=4 + +# +# NX Multi-user only options +# +CONFIG_NX_MULTIUSER=y +CONFIG_NX_BLOCKING=y +CONFIG_NX_MXSERVERMSGS=32 +CONFIG_NX_MXCLIENTMSGS=16 + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=3 +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +CONFIG_SCHED_WORKQUEUE=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_WORKPRIORITY=192 +CONFIG_SCHED_WORKPERIOD=50000 +CONFIG_SCHED_WORKSTACKSIZE=2048 +# CONFIG_SCHED_LPWORK is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_CXX_NEWLONG=y + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y + +# +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +CONFIG_NSH_ARCHINIT=y + +# +# NxWidgets/NxWM +# +CONFIG_NXWIDGETS=y + +# +# NX Server/Device Configuration +# +CONFIG_NXWIDGETS_FLICKERFREE=y +CONFIG_NXWIDGETS_DEVNO=0 +CONFIG_NXWIDGETS_VPLANE=0 +CONFIG_NXWIDGETS_SERVERPRIO=110 +CONFIG_NXWIDGETS_SERVERSTACK=1596 +CONFIG_NXWIDGETS_CLIENTPRIO=100 +CONFIG_NXWIDGETS_LISTENERPRIO=100 +CONFIG_NXWIDGETS_LISTENERSTACK=1596 +# CONFIG_NXWIDGETS_EXTERNINIT is not set +# CONFIG_NXWIDGET_EVENTWAIT is not set + +# +# NXWidget Configuration +# +CONFIG_NXWIDGETS_BPP=16 +CONFIG_NXWIDGETS_SIZEOFCHAR=1 + +# +# NXWidget Default Values +# +# CONFIG_NXWIDGETS_SYSTEM_CUSTOM_FONTID is not set +CONFIG_NXWIDGETS_TNXARRAY_INITIALSIZE=16 +CONFIG_NXWIDGETS_TNXARRAY_SIZEINCREMENT=8 +# CONFIG_NXWIDGETS_CUSTOM_FILLCOLORS is not set +# CONFIG_NXWIDGETS_CUSTOM_EDGECOLORS is not set +# CONFIG_NXWIDGETS_CUSTOM_TEXTCOLORS is not set +CONFIG_NXWIDGETS_TRANSPARENT_COLOR=0x0 + +# +# Keypad behavior +# +CONFIG_NXWIDGETS_FIRST_REPEAT_TIME=500 +CONFIG_NXWIDGETS_CONTINUE_REPEAT_TIME=200 +CONFIG_NXWIDGETS_DOUBLECLICK_TIME=350 +CONFIG_NXWIDGETS_KBDBUFFER_SIZE=16 +CONFIG_NXWIDGETS_CURSORCONTROL_SIZE=4 +# CONFIG_NXWIDGET_MEMMONITOR is not set +CONFIG_NXWM=y + +# +# General settings +# +# CONFIG_NXWM_SYSTEM_CUSTOM_FONTID is not set +CONFIG_NXWM_UNITTEST=y + +# +# Color configuration +# +# CONFIG_NXWM_CUSTOM_FILLCOLORS is not set +# CONFIG_NXWM_CUSTOM_EDGECOLORS is not set +# CONFIG_NXWM_CUSTOM_TEXTCOLORS is not set + +# +# Horizontal and vertical spacing of icons in the task bar +# +CONFIG_NXWM_TASKBAR_VSPACING=4 +CONFIG_NXWM_TASKBAR_HSPACING=4 +# CONFIG_NXWM_TASKBAR_TOP is not set +# CONFIG_NXWM_TASKBAR_BOTTOM is not set +CONFIG_NXWM_TASKBAR_LEFT=y +# CONFIG_NXWM_TASKBAR_RIGHT is not set +# CONFIG_NXWM_CUSTOM_TASKBAR_WIDTH is not set +# CONFIG_NXWM_DISABLE_MINIMIZE is not set +# CONFIG_NXWM_TASKBAR_NO_BORDER is not set + +# +# Tool Bar Configuration +# +# CONFIG_NXWM_CUSTOM_TOOLBAR_HEIGHT is not set + +# +# Background Image +# +# CONFIG_NXWM_DISABLE_BACKGROUND_IMAGE is not set +CONFIG_NXWM_BACKGROUND_IMAGE="" + +# +# Application Window Configuration +# +# CONFIG_NXWM_CUSTOM_APPWINDOW_ICONS is not set + +# +# Start Window Configuration +# + +# +# Horizontal and vertical spacing of icons in the task bar +# +CONFIG_NXWM_STARTWINDOW_VSPACING=4 +CONFIG_NXWM_STARTWINDOW_HSPACING=4 +# CONFIG_NXWM_CUSTOM_STARTWINDOW_ICON is not set +CONFIG_NXWM_STARTWINDOW_MQNAME="/dev/nxwm" +CONFIG_NXWM_STARTWINDOW_MXMSGS=32 +CONFIG_NXWM_STARTWINDOW_MXMPRIO=42 +CONFIG_NXWM_STARTWINDOW_PRIO=100 +CONFIG_NXWM_STARTWINDOW_STACKSIZE=1596 + +# +# NxConsole Window Configuration +# +CONFIG_NXWM_NXCONSOLE_PRIO=100 +CONFIG_NXWM_NXCONSOLE_STACKSIZE=1596 +# CONFIG_NXWM_NXCONSOLE_CUSTOM_COLORS is not set +# CONFIG_NXWM_NXCONSOLE_CUSTOM_FONTID is not set +# CONFIG_NXWM_CUSTOM_NXCONSOLE_ICON is not set +CONFIG_NXWM_TOUCHSCREEN=y + +# +# Touchscreen device settings +# +CONFIG_NXWM_TOUCHSCREEN_DEVNO=0 +CONFIG_NXWM_TOUCHSCREEN_DEVPATH="/dev/input0" +CONFIG_NXWM_TOUCHSCREEN_SIGNO=5 +CONFIG_NXWM_TOUCHSCREEN_LISTENERPRIO=100 +CONFIG_NXWM_TOUCHSCREEN_LISTENERSTACK=1596 +CONFIG_NXWM_KEYBOARD=y + +# +# Keyboard device settings +# +CONFIG_NXWM_KEYBOARD_DEVPATH="/dev/console" +CONFIG_NXWM_KEYBOARD_SIGNO=6 +CONFIG_NXWM_KEYBOARD_BUFSIZE=16 +CONFIG_NXWM_KEYBOARD_LISTENERPRIO=100 +CONFIG_NXWM_KEYBOARD_LISTENERSTACK=1024 + +# +# Calibration display settings +# +# CONFIG_NXWM_CALIBRATION_CUSTOM_COLORS is not set +# CONFIG_NXWM_CUSTOM_CALIBRATION_ICON is not set +CONFIG_NXWM_CALIBRATION_SIGNO=5 +CONFIG_NXWM_CALIBRATION_LISTENERPRIO=100 +CONFIG_NXWM_CALIBRATION_LISTENERSTACK=1024 + +# +# Hex Calculator display settings +# +# CONFIG_NXWM_HEXCALCULATOR_CUSTOM_COLORS is not set +# CONFIG_NXWM_CUSTOM_HEXCALCULATOR_ICON is not set +CONFIG_NXWM_HEXCALCULATOR_CUSTOM_FONTID=y +CONFIG_NXWM_HEXCALCULATOR_FONTID=5 +# CONFIG_NXWM_MEDIAPLAYER is not set + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# RAM test +# +# CONFIG_SYSTEM_RAMTEST is not set + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# diff --git a/nuttx/configs/sam3u-ek/nxwm/setenv.sh b/nuttx/configs/sam3u-ek/nxwm/setenv.sh new file mode 100755 index 000000000..cca744eed --- /dev/null +++ b/nuttx/configs/sam3u-ek/nxwm/setenv.sh @@ -0,0 +1,74 @@ +#!/bin/bash +# configs/sam3u-ek/nxwm/setenv.sh +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the Atmel GCC +# toolchain under Windows. You will also have to edit this if you install +# this toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" |