diff options
-rw-r--r-- | nuttx/configs/sam3u-ek/README.txt | 21 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/nxwm/defconfig | 26 |
2 files changed, 18 insertions, 29 deletions
diff --git a/nuttx/configs/sam3u-ek/README.txt b/nuttx/configs/sam3u-ek/README.txt index 55f269d0f..04396fc48 100644 --- a/nuttx/configs/sam3u-ek/README.txt +++ b/nuttx/configs/sam3u-ek/README.txt @@ -442,15 +442,20 @@ Configurations Build Setup: CONFIG_HOST_LINUX=y : Linux or other POSIX environment - 4. These configurations use the older, OABI, buildroot toolchain. But - that is easily reconfigured: + 4. All of these configurations use the older, OABI, buildroot toolchain + (unless stated otherwise in the description of the configuration). That + toolchain selection can easily be reconfigured using 'make menuconfig'. + Here are the relevant current settings: + Build Setup: + CONFIG_HOST_LINUX=y : Linux or other pure POSIX invironment + : (including Cygwin) System Type -> Toolchain: CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain - If you want to use the Atmel GCC toolchain, here are the steps to - do so: + If you want to use the Atmel GCC toolchain, for example, here are the + steps to do so: Build Setup: CONFIG_HOST_WINDOWS=y : Windows @@ -696,6 +701,14 @@ Configurations 2. 2013-6-29: Various changes to get a clean build of this configuration. Still untested. + 3. 20113-6-30: I cannot load this program using AtmelStudio6.1. + The total size with DEBUG on is 138.9 KB. I have verified + that the first 128KB may have been written correctly, but then + the code above 128KB wraps and overwrites the code at the + beginning of FLASH, trashing the FLASH images. + + Bottom line: Still untested. + ostest: This configuration directory, performs a simple OS test using examples/ostest. By default, this project assumes that you are diff --git a/nuttx/configs/sam3u-ek/nxwm/defconfig b/nuttx/configs/sam3u-ek/nxwm/defconfig index aed970cec..086a39925 100644 --- a/nuttx/configs/sam3u-ek/nxwm/defconfig +++ b/nuttx/configs/sam3u-ek/nxwm/defconfig @@ -38,29 +38,7 @@ CONFIG_RAW_BINARY=y # # Debug Options # -CONFIG_DEBUG=y -CONFIG_DEBUG_VERBOSE=y - -# -# Subsystem Debug Options -# -# CONFIG_DEBUG_MM is not set -# CONFIG_DEBUG_SCHED is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_LIB is not set -# CONFIG_DEBUG_BINFMT is not set -# CONFIG_DEBUG_GRAPHICS is not set - -# -# Driver Debug Options -# -# CONFIG_DEBUG_LCD is not set -# CONFIG_DEBUG_LEDS is not set -CONFIG_DEBUG_INPUT=y -# CONFIG_DEBUG_ANALOG is not set -# CONFIG_DEBUG_SPI is not set -# CONFIG_DEBUG_GPIO is not set -# CONFIG_DEBUG_AUDIO is not set +# CONFIG_DEBUG is not set # CONFIG_DEBUG_SYMBOLS is not set # @@ -105,7 +83,6 @@ CONFIG_ARCH_CHIP="sam34" # CONFIG_ARCH_HAVE_FPU is not set CONFIG_ARCH_HAVE_MPU=y # CONFIG_ARMV7M_MPU is not set -# CONFIG_DEBUG_HARDFAULT is not set # # ARMV7M Configuration Options @@ -405,7 +382,6 @@ CONFIG_SERIAL=y CONFIG_ARCH_HAVE_UART0=y CONFIG_MCU_SERIAL=y CONFIG_STANDARD_SERIAL=y -# CONFIG_SERIAL_TIOCSERGSTRUCT is not set CONFIG_UART0_SERIAL_CONSOLE=y # CONFIG_NO_SERIAL_CONSOLE is not set |