diff options
Diffstat (limited to 'apps/netutils/thttpd/Kconfig')
-rw-r--r-- | apps/netutils/thttpd/Kconfig | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/apps/netutils/thttpd/Kconfig b/apps/netutils/thttpd/Kconfig index ae2bf3130..ee630ee3b 100644 --- a/apps/netutils/thttpd/Kconfig +++ b/apps/netutils/thttpd/Kconfig @@ -2,3 +2,232 @@ # For a description of the syntax of this configuration file, # see misc/tools/kconfig-language.txt. # + +config THTTPD_PORT + int "THTTPD port number" + default 80 + ---help--- + THTTPD Server port number. Default: 80 + +config THTTPD_IPADDR + hex "THTTPD IP address" + default 0x10000002 + ---help--- + Server IP address (no host name). Default: 0x10000002 + + This is a 32-bit integer value in host order. So, as an example, + the default value of 0x10000002 would correspond to 10.0.0.2. + +config THTTPD_SERVER_ADDRESS + string "Reported server URL" + default "http://www.nuttx.org" + ---help--- + SERVER_ADDRESS: response, Default: "http://www.nuttx.org" + +config THTTPD_SERVER_SOFTWARE + string "Reporter server software string" + default "thttpd/2.25b 29dec2003-NuttX" + ---help--- + SERVER_SOFTWARE: response, Default: "thttpd/2.25b 29dec2003-NuttX" + +config THTTPD_PATH + string "Path to the server content" + default "/mnt/www" + ---help--- + Server working directory. Default: "/mnt/www" + +config THTTPD_CGI_PATH + string "Path to CGI content" + default "/mnt/www/cgi-bin" + ---help--- + Path to CGI executables. Default: "/mnt/www/cgi-bin" + +config THTTPD_CGI_PATTERN + string "CGI match pattern" + default "/mnt/www/cgi-bin/*" + ---help--- + Only CGI programs matching this pattern will be executed. In + fact, if this value is not defined then no CGI logic will be built. + Default: "/mnt/www/cgi-bin/*" + +config THTTPD_CGI_PRIORITY + int "CGI child priority" + default 50 + ---help--- + Provides the priority of CGI child tasks. Default: 50 + +config THTTPD_CGI_STACKSIZE + int "CGI child stack size" + default 2048 + ---help--- + Provides the default stack size of CGI child task (will be overridden + by the stack size in the NXFLAT header) + +config THTTPD_CGI_BYTECOUNT + int "Byte output limit" + default 200000 + ---help--- + Byte output limit for CGI tasks. Default: 200000 + +config THTTPD_CGI_TIMELIMIT + int "CGI time limit" + default 0 + ---help--- + How many seconds to allow CGI programs to run before killing them. + Default: 0 (no time limit) + +config THTTPD_CHARSET + string "Default character set" + default "iso-8859-1" + ---help--- + The default character set name to use with text MIME types. + Default: "iso-8859-1" + +config THTTPD_IOBUFFERSIZE + int "Initial I/O buffer size" + default 256 + ---help--- + Initial I/O buffer size. Default: 256 + +config THTTPD_MINSTRSIZE + int "Minimum string size" + default 64 + ---help--- + Minimum string size. Default: 64 + +config THTTPD_REALLOCINCR + int "String reallocation increment" + default 64 + ---help--- + String reallocation increment. Default: 64 + +config THTTPD_MAXREALLOC + int "Maximum string reallocation size" + default 4096 + ---help--- + Maximum string reallocation size. Default: 4096 + +config THTTPD_CGIINBUFFERSIZ + int "CGI interpose input buffer size" + default 512 + ---help--- + CGI interpose input buffer size. Default: 512 + +config THTTPD_CGIOUTBUFFERSIZE + int "CGI interpose output buffer size" + default 512 + ---help--- + CGI interpose output buffer size. Default: 512 + +config THTTPD_INDEX_NAMES + string "Index file name list" + default "\"index.html\", \"index.htm\", \"index.cgi\"" + ---help--- + A list of index filenames to check. The files are searched for + in this order. Default: "\"index.html\", \"index.htm\", \"index.cgi\"" + +config AUTH_FILE + string "Authorization file" +# default ".htpasswd" + ---help--- + The file to use for authentication. If this is defined then thttpd + checks for this file in the local directory before every fetch. If + the file exists then authentication is done, otherwise the fetch proceeds + as usual. If you leave this undefined then thttpd will not implement + authentication at all and will not check for auth files, which saves a + bit of CPU time. A typical value is ".htpasswd" + +config THTTPD_LISTEN_BACKLOG + int "Listen backlog" + default 8 + ---help--- + The listen() backlog queue length. Default: 8 + +config THTTPD_LINGER_MSEC + int "Linger time (msec)" + default 500 + ---help--- + How many milliseconds to leave a connection open while doing a lingering + close. Default: 500 + +config THTTPD_OCCASIONAL_MSEC + int "Occasional clean-up time (msec)" + default 120 + ---help--- + How often to run the occasional cleanup job in milliseconds. + Default: 120 (2 minutes) + +config THTTPD_MEMDEBUG + bool "Enable memory debug" + default n + depends on DEBUG && DEBUG_NET + ---help--- + Enable THTTPD memory usage debug output. Default: n + +config THTTPD_IDLE_READ_LIMIT_SEC + int "Idle read time limit (sec)" + default 300 + ---help--- + How many seconds to allow for reading the initial request on a new connection. + Default: 300 + +config THTTPD_IDLE_SEND_LIMIT_SEC + int "Idle send time limit (sec)" + default 300 + ---help--- + How many seconds before an idle connection gets closed. + Default: 300 + +config THTTPD_TILDE_MAP1 + string "Tilde mapping" + ---help--- + Tilde mapping. + + Many URLs use ~username to indicate a user's home directory. thttpd + provides two options for mapping this construct to an actual filename. + + 1) Map ~username to <prefix>/username. This is the recommended choice. + Each user gets a subdirectory in the main web tree, and the tilde + construct points there. The prefix could be something like "users", + or it could be empty. + 2) Map ~username to <user's homedir>/<postfix>. The postfix would be + the name of a subdirectory off of the user's actual home dir, + something like "public_html". + + You can also leave both options undefined, and thttpd will not do + anything special about tildes. Enabling both options is an error. + Typical values, if they're defined, are "users" for + config THTTPD_TILDE_MAP1 and "public_html" for THTTPD_TILDE_MAP2. + +config THTTPD_TILDE_MAP2 + string "Tilde mapping" + ---help--- + Tilde mapping. + + Many URLs use ~username to indicate a user's home directory. thttpd + provides two options for mapping this construct to an actual filename. + + 1) Map ~username to <prefix>/username. This is the recommended choice. + Each user gets a subdirectory in the main web tree, and the tilde + construct points there. The prefix could be something like "users", + or it could be empty. + 2) Map ~username to <user's homedir>/<postfix>. The postfix would be + the name of a subdirectory off of the user's actual home dir, + something like "public_html". + + You can also leave both options undefined, and thttpd will not do + anything special about tildes. Enabling both options is an error. + Typical values, if they're defined, are "users" for + config THTTPD_TILDE_MAP1 and "public_html" for THTTPD_TILDE_MAP2. + +config THTTPD_GENERATE_INDICES + bool "Generate name indices" + default n + ---help--- + +config THTTPD_URLPATTERN + string "URL pattern" + ---help--- + If defined, then it will be used to match and verify referrers. + + |