diff options
Diffstat (limited to 'nuttx/ChangeLog')
-rw-r--r-- | nuttx/ChangeLog | 24 |
1 files changed, 13 insertions, 11 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index df729102d..b991259e8 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2576,7 +2576,7 @@ * arch/arm/src/stm32/stm32f*0xx_rcc.c: In order to use CAN2, both CAN1 and CAN2 clocking must be enabled. * arch/mips/src/pic32mx/picm32mx-usbdev.c: Several stall-related fixes so that - the USB device driver can used the the mass storage class (which does a LOT + the USB device driver can used the mass storage class (which does a LOT of stalling as part of its normal protocol). The PIC32 USB Mass Storage device is, however, still non-functional when debug is OFF. * include/nuttx/fs: Move all file-system related files from include/nuttx to @@ -3288,7 +3288,7 @@ * arch/*/src/Makefile: Remove some old logic that was kicked off when CONFIG_BOOT_RUNFROMFLASH=y. The old logic used to use objcopy to move sections. Newer logic changes the load position - of sections in the the linker script. As far as I can tell, there + of sections in the linker script. As far as I can tell, there is nothing in the source tree now that depends on the old way of doing things (if I am wrong, they will need a change to the linker script). @@ -3406,7 +3406,7 @@ touchscreen driver). * configs/shenzhou/src/up_touchscreen.c: Add ADS7843E touchscreen support for the Shenzhou board. The initial check-in is untested - and basically a clone of the the touchscreen support for the SAM-3U. + and basically a clone of the touchscreen support for the SAM-3U. * tools/cfgparser.c: There are some NxWidget configuration settings that must be de-quoted. * arch/arm/src/stm32/Kconfig: There is no SPI4. Some platforms @@ -3567,7 +3567,7 @@ * net/netdev_ioctl.c: Add interface state flags and ioctl calls to bring network interfaces up and down (from Darcy Gong). * config/stm32f4discovery: Enable C++ exceptions. Now the entire - apps/examples/cxxtest works -- meaning the the uClibc++ is + apps/examples/cxxtest works -- meaning that the uClibc++ is complete and verified for the STM32 platform. 6.24 2012-12-20 Gregory Nutt <gnutt@nuttx.org> @@ -3636,7 +3636,7 @@ CONFIG_WINDOWS_NATIVE. This will allow me to eliminate a lot of conditional logic elsewhere. * nuttx/graphics: One a mouse button is pressed, continue to report all - mouse button events to the first window that received the the initial + mouse button events to the first window that received the initial button down event, even if the mouse attempts to drag outside the window. From Petteri Aimonen. * nuttx/graphics/nxmu/nx_block.c: One more fix to the NX block message @@ -3753,7 +3753,7 @@ Also from Petteri Aimonen. * include/stdbool.h: Can now be disabled for C++ files if CONFIG_C99_BOOL8 is defined. CONFIG_C99_BOOL8 indicates (1) that the sizeof(_Bool) is one in both - C and C++, and (2) the the C compiler is C99 and supports the _Bool intrinsic + C and C++, and (2) the C compiler is C99 and supports the _Bool intrinsic type. Requested by Freddie Chopin. * include/stdlib/lib_rand.c: Various additional changes so that the integer value zero can be returned. Requested by Freddie Chopin. @@ -4435,7 +4435,7 @@ and simpler. However, the C code intermixed with SVC calls was not properly preserving registers. The more complex, assembly language version does not suffer from these issues. I believe - the the kernel build can now be called "feature complete" + the kernel build can now be called "feature complete" (2013-03-23). * binfmt/binfmt_execmodule.c: Here is a place where I forget to update the call to sched_releasetcb() to pass the thread @@ -4509,7 +4509,7 @@ support for the touschscreen on the WaveShare LCD (2013-4-01). * configs/several: There were already some functions called lpc17_sspinitialize(). So they had to be renamed (2013-4-01). - * arch/arm/src/lpc17xx/lpc17_ssp.c: Adapted to work the the LPC178x + * arch/arm/src/lpc17xx/lpc17_ssp.c: Adapted to work with the LPC178x family (2013-4-01). * arch/arm/src/lpc17xx/lpc17_gpio.c/.h: Separate LPC176x and LPC178x logic into separate files. The logic is diverging to much to @@ -4725,7 +4725,7 @@ * nuttx/syscall/syscall.csv: Type of first parameter of on_exit() is wrong. Reported by Ken Pettit (2013-5-17). * configs/mikroe-stm32f4/kernel/, kostest/ and scripts/: Add kernel build - support and kernel mode OS test example for the the MikroElektronkia + support and kernel mode OS test example for the MikroElektronkia MultiMedia STM32 M4 board. From Ken Pettit (2013-5-17). * arch/arm/include/stm32/chip.h and arch/arm/src/stme32/chip/stm32l15xxx_pinmap.h: Beginning of support for the STM32L15X family (2013-5-18). @@ -4982,7 +4982,7 @@ so that is it compatible with the SPI drivers of other MCUs (2013-6-16). * configs/sam3u-ek/src/up_touchscreen.c and configs/sam4l-xplained/src/sam_mmcsd.c: - Changed needed because of the above change the the SAM3/4 SPI + Changed needed because of the above change to the SAM3/4 SPI interface (2013-6-16). * drivers/input/ads7843e.c: Remove the wait for the touchscreen busy bit. I don't see the busy bit changing on the SAM3U-EK board. But @@ -5211,7 +5211,7 @@ * The sama5d3x-ek/hello now runs correctly (2013-7-28). * configs/sama5d3x-ek/ostest/: This configuration has been modified to run out NOR flash. More work is still needed to reconfigure the - SMC so the the NOR flash can work with the high clock (2013-7-28). + SMC so that the NOR flash can work with the high clock (2013-7-28). * arch/arm/src/sama5/sam_clockconfig.c/h and configs/sama5d3x-ek/src/sam_norflash.c: Add a file structure that will (eventually) support reconfiguration of NOR flash when NuttX @@ -5467,4 +5467,6 @@ max packetsize. High speed needs 64 bytes, low speed needs 8 bytes, and full speed can handle almost any size (2013-8-26). * arch/arm: Add hooks for Cortex-A8. Not much more yet (2013-8-27). + * Lots of files: Fix all occurrents of "the the" in documentation and + comments (2013-8-27). |